Ulrich Weigand [Fri, 16 May 2008 12:58:49 +0000 (12:58 +0000)]
gdb/
2008-05-15 Pedro Alves <pedro@codesourcery.com>
Ulrich Weigand <uweigand@de.ibm.com>
* minsyms.c (lookup_minimal_symbol_by_pc_name): New function.
* symtab.h (lookup_minimal_symbol_by_pc_name): Add prototype.
* symtab.c (fixup_section): Remove prototype. Add ADDR parameter;
use it instead of ginfo->value.address. Look up minimal symbol by
address and name. Assume OBJFILE is non-NULL.
(fixup_symbol_section): Ensure we always have an objfile to look
into. Extract and pass to fixup_section the symbol's address that
will match the minimal symbol's address.
(fixup_psymbol_section): Likewise.
(find_pc_sect_psymtab): Fall back to non-addrmap case when debugging
overlays and the addrmap returned the wrong section.
* dwarf2read.c (var_decode_location): Set SYMBOL_CLASS before
calling fixup_symbol_section.
gdb/testsuite/
2008-05-15 Pedro Alves <pedro@codesourcery.com>
* gdb.base/fixsection.exp: New file.
* gdb.base/fixsection0.c: New file.
* gdb.base/fixsection1.c: New file.
Ulrich Weigand [Fri, 16 May 2008 12:51:21 +0000 (12:51 +0000)]
* minsyms.c: Include "target.h".
(find_solib_trampoline_target): Handle minimal symbols pointing
to function descriptors as well.
* Makefile.in (minsyms.o): Update dependencies.
* ppc-linux-tdep.c (ppc64_standard_linkage): Rename to ...
(ppc64_standard_linkage1): ... this. Fix optional instructions.
(PPC64_STANDARD_LINKAGE_LEN): Rename to ...
(PPC64_STANDARD_LINKAGE1_LEN): ... this.
(ppc64_standard_linkage2, ppc64_standard_linkage3): New.
(PPC64_STANDARD_LINKAGE2_LEN, PPC64_STANDARD_LINKAGE3_LEN): New.
(ppc64_standard_linkage_target): Rename to ...
(ppc64_standard_linkage1_target): ... this.
(ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): New.
(ppc64_skip_trampoline_code): Support three variants of standard
linkage stubs. Call find_solib_trampoline_target to handle
glink stubs.
Ulrich Weigand [Wed, 14 May 2008 18:28:59 +0000 (18:28 +0000)]
* ppc-linux-tdep.c (ppc_linux_convert_from_func_ptr_addr): Rename ...
(ppc64_linux_convert_from_func_ptr_addr): ... to this. No longer try
to handle ppc32 PLT entries.
(ppc_linux_init_abi): Install ppc64_linux_convert_from_func_ptr_addr
only on ppc64.
Alan Modra [Wed, 14 May 2008 02:21:19 +0000 (02:21 +0000)]
* elf32-ppc.c (section_covers_vma): New function.
(ppc_elf_get_synthetic_symtab): New function.
(bfd_elf32_get_synthetic_symtab): Define.
* elf64-ppc.c (section_covers_vma): New function.
(ppc64_elf_get_synthetic_symtab): Generate sym@plt on glink branch
table entries, and __glink_PLTresolve on resolver stub.
(ppc64_elf_build_stubs): Rename __glink sym to __glink_PLTresolve.
Alan Modra [Mon, 12 May 2008 12:47:47 +0000 (12:47 +0000)]
PR 6443
* elf32-ppc.c (MUST_BE_DYN_RELOC): Delete.
(must_be_dyn_reloc): New function.
(ppc_elf_check_relocs): Don't set DF_STATIC_TLS for tprel relocs
in pies.
(ppc_elf_tls_optimize): Optimise pies.
(ppc_elf_relocate_section): Use a section symbol rather than no
symbol if possible for LD->IE TLS sequence, but don't error if
we must use no symbol.
* elf64-ppc.c (MUST_BE_DYN_RELOC): As for elf32-ppc.c.
(must_be_dyn_reloc): Likewise.
(ppc64_elf_check_relocs): Likewise.
(ppc64_elf_tls_optimize): Likewise.
(ppc64_elf_relocate_section): Likewise.
David S. Miller [Sun, 11 May 2008 22:10:30 +0000 (22:10 +0000)]
* sparc-linux-tdep.c (PSR_SYSCALL): Define.
(sparc_linux_write_pc): New function.
(sparc32_linux_init_abi): Register it.
* sparc64-linux-tdep.c (TSTATE_SYSCALL): Define.
(sparc64_linux_write_pc): New function.
(sparc64_linux_init_abi): Register it.
Joel Brobecker [Fri, 9 May 2008 23:50:41 +0000 (23:50 +0000)]
* ada-lang.c (ada_evaluate_subexp) [BINOP_ASSIGN]: Do not force
the type of the right hand side of the assignment to the type
of the left hand side if the left hand side is a convenience
variable.
Chao-ying Fu [Fri, 9 May 2008 18:18:22 +0000 (18:18 +0000)]
* config/tc-mips.c (md_begin): Use strncmp to compare TARGET_OS, in
case that some characters append at the end of the name.
(mips_ip): Likewise.
(s_change_sec): Likewise.
(md_section_align): Likewise.
Kai Tietz [Fri, 9 May 2008 11:56:31 +0000 (11:56 +0000)]
2008-05-09 Kai Tietz <kai.tietz@onevision.com>
ld/PR6502
* emultempl/pep.em (compute_dll_image_base): Use bfd_vma instead of long
and change return type to bfd_vma.
(definfo): Change type of address from long to bfd_vma.
(set_pep_value): Replace strtoul to strtoull.
(gld_${EMULATION_NAME}_set_symbols): use bfd_vma instead of long..
* pe-dll.c (pe_dll_generate_def_file): Use fprintf_vma to print ImageBase.
(quick_reloc): Change argument address from int to bfd_size_type.
Ulrich Weigand [Thu, 8 May 2008 19:46:56 +0000 (19:46 +0000)]
* regcache.c (registers_length): Remove.
(set_register_cache): Verify that PBUFSIZ is large enough to hold a
full register packet.
* regcache.h (registers_length): Remove prototype.
* server.h (PBUFSIZ): Define to 16384.
* gdb.base/commands.exp (watchpoint_command_test): Handle
gdb,no_hardware_watchpoints.
* gdb.base/float.exp: Allow ARM targets without floating point.
* gdb.base/step-test.exp: Allow callee@plt when stepping in.
Bob Wilson [Wed, 7 May 2008 23:13:09 +0000 (23:13 +0000)]
bfd/
* elf32-xtensa.c (xtensa_property_section_name): New.
(xtensa_make_property_section): New.
(xtensa_get_property_section): Make static. Do not create a new
section if it does not exist.
gas/
* config/tc-xtensa.c (xtensa_create_property_segments): Use
xtensa_make_property_section instead of xtensa_get_property_section.
(xtensa_create_xproperty_segments): Likewise.
Alan Modra [Wed, 7 May 2008 14:46:44 +0000 (14:46 +0000)]
bfd/
* elf32-spu.c (spu_elf_special_sections): Add "._ea".
(spu_elf_relocate_section): Handle relocations against symbols
defined in ._ea specially.
binutils/
* embedspu.sh: Take note of R_SPU_PPU32/64 relocs without a symbol,
and if present, put image in ".data.speelf". Put program handle
in ".data.spehandle".
ld/emulparams/
* elf32_spu.sh (OTHER_SECTIONS): Add "._ea".
* elf32ppc.sh: If building with spu support, put ".data.spehandle"
sections at the start of ".data" and provide a symbol to locate
the directory of embedded spe programs.
ld/testsuite/
* ld-spu/ear.s: Align various sections.
* ld-spu/embed.rd: Update.
Alan Modra [Wed, 7 May 2008 14:30:41 +0000 (14:30 +0000)]
* ldexp.c (exp_print_token): Add ABSOLUTE, MIN_K, ASSERT_K. Correct
MAX_K.
(fold_binary <SEGMENT_START>): Set expld.result.section to
current section. Expand comment. Formatting.
(fold_name <DEFINED>): Set expld.result.section to current section.
* symtab.cc (Symbol_table::add_from_dynobj): If we see a protected
symbol, change it to have default visibility.
* testsuite/protected_1.cc: New file.
* testsuite/protected_2.cc: New file.
* testsuite/protected_3.cc: New file.
* testsuite/protected_main_1.cc: New file.
* testsuite/protected_main_2.cc: New file.
* testsuite/protected_main_3.cc: New file.
* testsuite/Makefile.am (check_PROGRAMS): Add protected_1.
(protected_1_SOURCES, protected_1_DEPENDENCIES): Define.
(protected_1_LDFLAGS, protected_1_LDADD): Define.
(protected_1.so): New target.
(protected_1_pic.o, protected_2_pic.o): New targets.
(protected_3_pic.o): New target.
(check_PROGRAMS): Add protected_2.
(protected_2_SOURCES, protected_2_DEPENDENCIES): Define.
(protected_2_LDFLAGS, protected_2_LDADD): Define.
* testsuite/Makefile.in: Rebuild.
Joel Brobecker [Tue, 6 May 2008 21:35:01 +0000 (21:35 +0000)]
* valprint.c (val_print): Add new language parameter and use it
instead of using the current_language. Update calls to val_print
throughout.
(common_val_print): Add new langauge parameter and pass it to
val_print.
* value.h (struct language_defn): Add opaque declaration.
(val_print, common_val_print): Update declarations.
* stack.c (print_frame_args): Update call to common_val_print
using the appropriate language.
* mi/mi-cmd-stack.c (list_args_or_locals): Likewise.
* c-valprint, f-valprint.c, m2-valprint.c, mt-tdep.c, infcmd.c,
mi/mi-main.c, jv-valprint.c, ada-valprint.c, varobj.c, p-valprint.c,
scm-valprint.c, cp-valprint.c, sh64-tdep.c, printcmd.c:
#include "language.h" if necessary.
Update calls to val_print and common_val_print.
* Makefile.in (mt-tdep.o, sh64-tdep.o, mi-cmds.o, mi-main.o):
Update dependencies.
* options.h (DEFINE_var): Add set_user_set_##varname__.
(DEFINE_bool_alias): New macro.
(class General_options): Define -Bstatic using DEFINE_bool_alias
rather than DEFINE_special. Add --undefined as an alias for -z
defs.
* options.cc (General_options::parse_Bstatic): Remove.
Doug Evans [Mon, 5 May 2008 21:14:37 +0000 (21:14 +0000)]
* NEWS: Mention new /m modifier for disassemble command.
* cli/cli-cmds.c (print_disassembly): New function.
(disassemble_current_function): New function
(disassemble_command): Recognize /m modifier, print mixed
source+assembly.
(init_cli_cmds): Update disassemble help text.
* configure.ac: If targ_extra_obj is set, link it in.
* configure.tgt: Initialize all variables.
(x86_64*): Set targ_extra_obj and targ_extra_size.
* configure: Rebuild.