Nick Clifton [Thu, 14 Feb 2008 15:20:26 +0000 (15:20 +0000)]
* efi-rtdrv-ia32.c: New file.
* efi-bsdrv-ia32.c: New file.
* efi-rtdrv-ia64.c: New file.
* efi-bsdrv-ia64.c: New file.
* efi-rtdrv-x86_64.c: New file.
* efi-bsdrv-x86_64.c: New file.
* peicode.h (pe_bfd_object_p): Add support for boot service and
runtime service drivers.
* libpei.h: Add macros for EFI formats, and rename the efi application
format macros to disambiguate.
* targets.c: Add bfd_target _vec externs.
(_bfd_tar): Add EFI _vec entries.
* config.bfd: Add EFI vectors into the selection routines.
* configure.in: add EFI _vec entries.
* configure: Regenerate.
* Makefile.am: Add EFI files.
* Makefile.in: Regenerate.
Nick Clifton [Thu, 14 Feb 2008 13:04:29 +0000 (13:04 +0000)]
PR gas/2626
* avr.h (AVR_ISA_2xxe): Define.
* config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
to AVR_ISA_2xxe.
(avr_operand): Disallow post-increment addressing in the lpm
instruction for the attiny26.
Nathan Sidwell [Thu, 14 Feb 2008 13:02:38 +0000 (13:02 +0000)]
* dwarf1.c (struct dwarf1_debug): Add syms member.
(alloc_dwarf1_unit, alloc_dwarf1_func): Check for out of memory.
(parse_line_table, _bfd_dwarf1_find_nearest_line): Relocate
section contents, check for out of memory.
* dwarf1.c (struct dwarf1_debug): Change data pointers to bfd_byte.
(parse_die): Change data pointers to bfd_byte.
(parse_line_table, parse_functions_in_unit): Likewise.
Jan Beulich [Wed, 13 Feb 2008 13:41:26 +0000 (13:41 +0000)]
gas/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (parse_real_register): Don't return 'FLAT'
if not in Intel mode.
(i386_intel_operand): Ignore segment overrides in immediate and
offset operands.
(intel_e11): Range-check i.mem_operands before use as array
index. Filter out FLAT for uses other than as segment override.
(intel_get_token): Remove broken promotion of "FLAT:" to mean
"offset FLAT:".
gas/testsuite/
2008-02-13 Jan Beulich <jbeulich@novell.com>
Jan Beulich [Wed, 13 Feb 2008 10:14:40 +0000 (10:14 +0000)]
gas/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (allow_pseudo_reg): New.
(parse_real_register): Check for NULL just once. Allow all
register table entries when allow_pseudo_reg is non-zero.
Don't allow any registers without type when allow_pseudo_reg
is zero.
(tc_x86_regname_to_dw2regnum): Replace with ...
(tc_x86_parse_to_dw2regnum): ... this.
(tc_x86_frame_initial_instructions): Adjust for above change.
* config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
(tc_parse_to_dw2regnum): New.
(tc_x86_regname_to_dw2regnum): Replace with ...
(tc_x86_parse_to_dw2regnum): ... this.
* dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
(cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
error handling.
gas/testsuite/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* gas/cfi/cfi-i386.s: Add code testing use of all registers.
Fix a few comments.
* gas/cfi/cfi-x86_64.s: Likewise.
* gas/cfi/cfi-i386.d, gas/cfi/cfi-x86_64.d: Adjust.
opcodes/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* i386-gen.c (process_i386_registers): Process new fields.
* i386-opc.h (reg_entry): Shrink reg_flags and reg_num to
unsigned char. Add dw2_regnum and Dw2Inval.
* i386-reg.tbl: Provide initializers for dw2_regnum. Add pseudo
register names.
* i386-tbl.h: Re-generate.
DJ Delorie [Tue, 12 Feb 2008 19:11:55 +0000 (19:11 +0000)]
* elf32-iq2000.c (iq2000_elf_relocate_section): Adjust addend of
relocation pointing to local symbol in merged section.
* elf32-iq2000.c (iq2000_elf_relocate_offset16): New.
(iq2000_elf_relocate_section): Call it.
Nick Clifton [Tue, 12 Feb 2008 12:33:51 +0000 (12:33 +0000)]
* dlltool.c (mcore_elf_cache_filename): Add a const qualifier to
the argument.
(scan_obj_filename): Do not drop the const qualifier when calling
mcore_elf_cache_filename.
(struct fname_cache): Add const qualifier to filename field.
Nick Clifton [Tue, 12 Feb 2008 11:32:31 +0000 (11:32 +0000)]
PR ld/5692
* elf-bfd.h (enum elf_object_id): New enum, used to identify
target specific extensions to the elf_obj_tdata structure.
(struct elf_obj_tdata): New field 'object_id'.
(elf_object_id, elf_program_header_size, elf_symtab_hdr): New
macros for accessing fields in the elf_obj_tdata structure.
(bfd_elf_mkobject): Rename to bfd_elf_make_generic_object.
(bfd_elf_allocate_object): New function.
* elf.c (bfd_elf_mkobject): Rename to bfd_elf_make_generic_object
and implement by calling bfd_elf_allocate_object.
(bfd_elf_allocate_object): New function: Allocates an
elf_obj_tdata structure, possibly with a target specific
extension.
* elfxx-target.h (bfd_elfNN_mkobject): Use
bfd_elf_make_generic_object as the default value.
* elf32-arm.c (elf32_arm_obj_tdata): Rename to elf_arm_obj_tdata
for consistency with other, similar structures.
(is_arm_elf): New macro. Checks a BFD to make sure that is an ARM
ELF bfd.
(elf32_arm_mkobject): Call bfd_elf_allocate_object.
(bfd_elf32_arm_vfp11_erratum_scan): Use is_arm_elf macro to check
the bfd being processed.
(bfd_elf32_arm_vfp11_fix_veneer_locations): Likewise.
(bfd_elf32_arm_set_target_relocs): Likewise.
(bfd_elf32_arm_final_link_relocate): Likewise.
(bfd_elf32_arm_copy_private_bfd_data): Likewise.
(bfd_elf32_arm_merge_eabi_attributes): Likewise.
(bfd_elf32_arm_merge_private_bfd_data): Likewise.
(bfd_elf32_arm_check_relocs): Likewise.
(bfd_elf32_arm_gc_mark_extra_sections): Likewise.
(bfd_elf32_arm_size_dynamic_sections): Likewise.
(bfd_elf32_arm_process_before_allocation): Use elf_symtab_hdr.
(bfd_elf32_arm_init_maps): Likewise.
(bfd_elf32_arm_final_link_relocate): Likewise.
(bfd_elf32_arm_relocate_section): Likewise.
(bfd_elf32_arm_gc_sweep_hook): Likewise.
(bfd_elf32_arm_check_relocs): Likewise.
(bfd_elf32_arm_size_dynamic_sections): Likewise.
* elf32-i386.c (elf_i386_mkobject): Call bfd_elf_allocate_object.
(is_i386_elf): New macro. Checks a BFD to make sure that is an x86
ELF bfd.
(elf_i386_check_relocs): Use is_i386_elf macro to check the bfd
being processed.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
(elf_i386_check_relocs): Use elf_symtab_hdr.
(elf_i386_gc_sweep_hook): Likewise.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_mkobject): Call bfd_elf_allocate_object.
(elf_create_pointer_linker_section): Use is_ppc_elf_target to
verify that the bfd before accessing target specific fields.
(ppc_elf_check_relocs): Likewise.
(elf_finish_pointer_linker_section): Likewise.
(elf_create_pointer_linker_section): Use elf_symtab_hdr.
(ppc_elf_check_relocs): Likewise.
(ppc_elf_gc_sweep_hook): Likewise.
(ppc_elf_tls_optimize): Likewise.
(ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relax_section): Likewise.
(ppc_elf_relocate_section): Likewise.
* elf32-s390.c (struct elf_s390_obj_tdata): Add a comment
reminding programmers to keep this structure in sync with the one
defined in elf64-s390.c.
(elf_s390_mkobject): Call bfd_elf_allocate_object.
(is_s390_elf): New macro. Checks a BFD to make sure that is an s390
ELF bfd.
(elf_s390_check_relocs): Use is_s390_elf macro to check the bfd
being processed.
(elf_s390_size_dynamic_sections): Likewise.
(elf_s390_relocate_section): Likewise.
(elf_s390_check_relocs): Use elf_symtab_hdr.
(elf_s390_gc_sweep_hook): Likewise.
(elf_s390_size_dynamic_sections): Likewise.
(elf_s390_relocate_section): Likewise.
* elf32-sh.c (sh_elf_mkobject): Call bfd_elf_allocate_object.
(is_sh_elf): New macro. Checks a BFD to make sure that is an SH
ELF bfd.
(sh_elf_size_dynamic_sections): Use is_sh_elf macro to check the
bfd being processed.
(sh_elf_relocate_section): Likewise.
(sh_elf_check_relocs): Likewise.
(sh_elf_copy_private_data): Likewise.
(sh_elf_relax_section): Use elf_symtab_hdr.
(sh_elf_size_dynamic_sections): Likewise.
(sh_elf_relocate_section): Likewise.
(sh_elf_get_relocated_section_contents): Likewise.
(sh_elf_gc_sweep_hook): Likewise.
(sh_elf_check_relocs): Likewise.
* elf64-alpha.c (elf64_alpha_mkobject): Call bfd_elf_allocate_object.
(is_alpha_elf): New macro. Checks a BFD to make sure that is an
Alpha ELF bfd.
(elf64_alpha_create_got_section): Use is_alpha_elf macro to check
the bfd being processed.
(elf64_alpha_create_dynamic_section): Likewise.
(elf64_alpha_check_relocs): Likewise.
(elf64_alpha_size_got_sections): Likewise.
(elf64_alpha_relax_section): Likewise.
(elf64_alpha_relocate_section): Likewise.
(elf64_alpha_final_link): Likewise.
(elf64_alpha_check_relocs): Use elf_symtab_hdr.
(elf64_alpha_relax_section): Likewise.
(elf64_alpha_relocate_section_r): Likewise.
(elf64_alpha_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_mkobject): Call bfd_elf_allocate_object.
(ppc64_elf_check_relocs): Use is_ppc64_elf_target to check the bfd
being processed.
(opd_entry_value): Likewise.
(allocate_dynrelocs): Likewise.
(ppc64_elf_relocate_section): Likewise.
(ppc64_elf_check_relocs): Use elf_symtab_hdr.
(opd_entry_value): Likewise.
(ppc64_elf_gc_sweep_hook): Likewise.
(get_sym_h): Likewise.
(ppc64_elf_edit_opd): Likewise.
(ppc64_elf_tls_optimize): Likewise.
(ppc64_elf_edit_toc): Likewise.
(ppc64_elf_size_dynamic_sections): Likewise.
(toc_adjusting_stub_needed): Likewise.
(ppc64_elf_size_stubs): Likewise.
(ppc64_elf_relocate_section): Likewise.
* elf64-s390.c (struct elf_s390_obj_tdata): Add a comment
reminding programmers to keep this structure in sync with the one
defined in elf32-s390.c.
(elf_s390_mkobject): Call bfd_elf_allocate_object.
(is_s390_elf): New macro. Checks a BFD to make sure that is an s390
ELF bfd.
(elf_s390_check_relocs): Use is_s390_elf macro to check the bfd
being processed.
(elf_s390_size_dynamic_sections): Likewise.
(elf_s390_relocate_section): Likewise.
(elf_s390_check_relocs): Use elf_symtab_hdr.
(elf_s390_gc_sweep_hook): Likewise.
(elf_s390_size_dynamic_sections): Likewise.
(elf_s390_relocate_section): Likewise.
* elf64-x86_64.c (elf64_x86_64_mkobject): Call bfd_elf_allocate_object.
(is_x86_64_elf): New macro. Checks a BFD to make sure that is an
x86_64 ELF bfd.
(elf64_x86_64_check_relocs): Use is_x86_64_elf macro to check the bfd
being processed.
(elf64_x86_64_size_dynamic_sections): Likewise.
(elf64_x86_64_relocate_section): Likewise.
(elf64_x86_64_check_relocs): Use elf_symtab_hdr.
(elf64_x86_64_gc_sweep_hook): Likewise.
(elf64_x86_64_size_dynamic_sections): Likewise.
(elf64_x86_64_relocate_section): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_mkobject): Call bfd_elf_allocate_object.
(is_sparc_elf): New macro. Checks a BFD to make sure that is a Sparc
ELF bfd.
(_bfd_sparc_elf_check_relocs): Use is_sparc_elf macro to check the
bfd being processed.
(_bfd_sparc_elf_gc_sweep_hook): Likewise.
(_bfd_sparc_elf_size_dynamic_sections): Likewise.
(_bfd_sparc_elf_check_relocs): Use elf_symtab_hdr.
(_bfd_sparc_elf_gc_sweep_hook): Likewise.
(_bfd_sparc_elf_size_dynamic_sections): Likewise.
(_bfd_sparc_elf_relocate_section): Likewise.
Nick Clifton [Tue, 12 Feb 2008 08:37:08 +0000 (08:37 +0000)]
* config/tc-tic4x.c (tic4x_insn_insert): Add const qualifier to
argument.
(tic4x_insn_add): Likewise.
(md_begin): Drop cast that was discarding a const qualifier.
* config/tc-d30v.c (get_reloc): Add const qualifier to op
argument.
(build_insn): Drop cast that was discarding a const qualifier.
Maxim Grigoriev [Mon, 11 Feb 2008 21:58:41 +0000 (21:58 +0000)]
2008-02-11 Maxim Grigoriev <maxim2405@gmail.com>
* NEWS (New native configurations): Xtensa GNU/Linux.
(New targets): Xtensa GNU/Linux.
* Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
xtensa-linux-tdep.o
(ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
(xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
* configure.tgt (xtensa*-*-linux*): New entry.
* xtensa-config.c (xtensa_tdep): New variable.
(xtensa_config_byte_order, xtensa_config_tdep): Removed.
(rmap): Change format based on new macro XTREG.
(XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
* xtensa-linux-nat.c: New.
* xtensa-linux-tdep.c: New.
* xtensa-xtregs.c: New.
* xtensa-tdep.h (xtensa_elf_gregset_t): Update.
(XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
(XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
(xtensa_register_t): New field coprocessor.
(XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
* xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write):
Update to handle privileged registers.
(xtensa_supply_gregset) Remove exccause and excvaddr registers.
(xtensa_push_dummy_call): Set windowstart register correctly.
(call0_analyze_prologue): Initialize xtensa_default_isa.
(xtensa_derive_tdep): New.
(xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
Call xtensa_derive_tdep().
* config/xtensa/linux.mh: New.
* regformats/reg-xtensa.dat: New.
Bernd Schmidt [Mon, 11 Feb 2008 16:04:51 +0000 (16:04 +0000)]
* elf32-bfin.c (bfin_relocate_section): Set up dynobj before using it
if necessary.
(elf32_bfin_merge_private_bfd_data): Simplify, and ensure object type
mismatches are detected.
Doug Evans [Fri, 8 Feb 2008 00:42:07 +0000 (00:42 +0000)]
* breakpoint.c: #include "hashtab.h".
(ambiguous_names_p): New fn.
(update_breakpoint_locations): When restoring bp enable status, don't
compare function names if any functions have same name.
* Makefile.in (breakpoint.o): Add hashtab.h dependency.
Joel Brobecker [Thu, 7 Feb 2008 22:27:53 +0000 (22:27 +0000)]
* ada-lang.c (symbol_completion_add): Make SV parameter a VEC**
instead of just a VEC*. Update use of SV.
(ada_make_symbol_completion_list): Update symbol_completion_add calls.
Joel Brobecker [Thu, 7 Feb 2008 19:06:51 +0000 (19:06 +0000)]
* ada-lang.c: #include "vec.h".
(struct string_vector, new_string_vector, string_vector_append):
Delete.
(char_ptr): New typedef.
(DEF_VEC_P (char_ptr)): New VEC type.
(symbol_completion_add): Update profile to take the new VEC type
instead of the old string_vector structure. Update code accordingly.
(ada_make_symbol_completion_list): Use the new VEC type instead of
the old string_vector structure, and update the code accordingly.
* Makefile.in (ada-lang.o): Add dependency on vec.h.
Alan Modra [Thu, 7 Feb 2008 01:26:56 +0000 (01:26 +0000)]
bfd/
* elf32-spu.c (spu_elf_size_stubs): Revert 2008-01-28 doubling
of _ovly_buf_table size.
(spu_elf_build_stubs): Use low bit of .size as "present" bit.
Adjust initialisations relating to _ovly_buf_table.
ld/
* emultempl/spu_ovl.S: Use low bit of _ovly_table.size as
a "present" bit rather than low bit of .buf. Correct indexing
into _ovly_buf_table. Use relative loads and stores to access
overlay manager local vars.
* emultempl/spu_ovl.o: Regenerate.
Pierre Muller [Wed, 6 Feb 2008 22:21:38 +0000 (22:21 +0000)]
* p-exp.y: Set current_type in missing places.
(leftdiv_is_integer): New static variable.
Typecast right operand of BINOP_DIV to long_double if both operands
are integers.
* gdb.base/callfuncs.c (t_float_many_args): New function.
(t_double_many_args): New function.
* gdb.base/callfuncs.exp: Add tests for exceeding float
and double parameters passed through the stack.
* simops.c (OP_2A0): If the shift count is zero, clear the
carry.
(OP_A007E0): Likewise.
(OP_2C0): Likewise.
(OP_C007E0): Likewise.
(OP_280): Likewise.
(OP_8007E0): Likewise.
* simops.c (OP_2C207E0): Correct PSW flags for special divu
conditions.
(OP_2C007E0): Likewise, for div.
(OP_28207E0): Likewise, for divhu.
(OP_28007E0): Likewise, for divh. Also, sign-extend the correct
operand.
* v850.igen (divh): Likewise, for 2-op divh.
projects / thirdparty / binutils-gdb.git / log
