Document RZ/V2MA usb3-peri bindings. RZ/V2MA usb3-peri is identical
to one found on the RZ/V2M SoC. No driver changes are required as
generic compatible string "renesas,rzv2m-usb3-peri" will be used as
a fallback.
Biju Das [Sat, 21 Jan 2023 14:58:43 +0000 (14:58 +0000)]
dt-bindings: usb: renesas,usb3-peri: Update reset, clock-name and interrupts properties
On RZ/V2M, USB3DRD module manages the drd_reset. Moreover, the interrupts
drd, gpi and bc are part of USB3DRD block. This patch removes
drd_reset and the interrupts drd, bc and gpi from usb3_peri bindings.
After this, there is only one reset and interrupts and therefore
removing reset-names and interrupt-names as well.
Whilst, Update the clock-name "aclk"->"axi" to make it consistent with
DRD and host blocks.
There is any harm in making such a change as, no users of
renesas,r9a09g011-usb3-peri yet in kernel release.
Biju Das [Sat, 21 Jan 2023 14:58:42 +0000 (14:58 +0000)]
dt-bindings: usb: renesas,usb-xhci: Document RZ/V2M support
Document the RZ/V2M SoC bindings.
The RZ/V2M SoC is a little different to the R-Car implementations.
You can access the registers associated with the currently set DRD mode,
therefore as part of init, we have to set the DRD mode to host.
Rob Herring [Tue, 24 Jan 2023 03:05:16 +0000 (21:05 -0600)]
dt-bindings: usb: Convert multiple "usb-ohci" bindings to DT schema
"usb-ohci" is another "generic" OHCI controller compatible string used by
several platforms. Add it to the generic-ohci.yaml schema and remove all
the old binding docs.
Marvell pxa-usb.txt has "usb-ohci" in the example, but actual users don't,
so drop it.
The "brcm,bcm3384-ohci" and "brcm,bcm3384-ehci" compatibles are already
documented in generic-ohci.yaml and generic-ehci.yaml, respectively, so
remove the old txt binding.
Rob Herring [Tue, 24 Jan 2023 02:59:36 +0000 (20:59 -0600)]
dt-bindings: usb: rockchip,dwc3: Move RK3399 to its own schema
The rockchip,dwc3.yaml schema defines a single DWC3 node, but the RK3399
uses the discouraged parent wrapper node and child 'generic' DWC3 node.
The intent was to modify the RK3399 DTs to use a single node, but the DT
changes were rejected for ABI reasons. However, the schema was accepted
as-is.
To fix this, we need to move the RK3399 binding to its own schema file.
The RK3328 and RK3568 bindings are correct and use a single node.
The Rockchip RK3399 DWC3 node has 'power-domains' property which isn't
allowed by the schema:
usb@fe900000: Unevaluated properties are not allowed ('power-domains' was unexpected)
Allow DWC3 nodes to have a power-domains entry. We could instead move
the power-domains property to the parent wrapper node, but the could be
an ABI break (Linux shouldn't care). Also, we don't want to encourage
the pattern of wrapper nodes just to define resources such as clocks,
resets, power-domains, etc. when not necessary.
Prashant Malani [Fri, 20 Jan 2023 20:58:28 +0000 (20:58 +0000)]
usb: typec: tcpm: Remove altmode active state updates
Since the "active" state for partner altmodes is now being taken care of
by the altmode driver itself (specifically, DisplayPort altmode), we
no longer need to do so from the port driver. So remove the calls to
typec_altmode_update_active() from TCPM.
Prashant Malani [Fri, 20 Jan 2023 20:58:26 +0000 (20:58 +0000)]
usb: typec: altmodes/displayport: Update active state
Update the altmode "active" state when we receive Acks for Enter and
Exit Mode commands. Having the right state is necessary to change Pin
Assignments using the 'pin_assignment" sysfs file.
Bjorn Andersson [Fri, 13 Jan 2023 04:11:15 +0000 (20:11 -0800)]
usb: typec: mux: Introduce GPIO-based SBU mux
A design found in various Qualcomm-based boards is to use a USB switch,
controlled through a pair of GPIO lines to connect, disconnect and
switch the orientation of the SBU lines in USB Type-C applications.
This introduces a generic driver, which implements the typec_switch and
typec_mux interfaces to perform these operations.
Bjorn Andersson [Fri, 13 Jan 2023 04:11:14 +0000 (20:11 -0800)]
dt-bindings: usb: Introduce GPIO-based SBU mux
Introduce a binding for GPIO-based mux hardware used for connecting,
disconnecting and switching orientation of the SBU lines in USB Type-C
applications.
Andy Shevchenko [Fri, 20 Jan 2023 15:44:37 +0000 (17:44 +0200)]
usb: fotg210: use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Andy Shevchenko [Fri, 20 Jan 2023 15:44:35 +0000 (17:44 +0200)]
usb: fotg210-udc: remove redundant error logging
A call to platform_get_irq() already prints an error on failure within
its own implementation. So printing another error based on its return
value in the caller is redundant and should be removed. The clean up
also makes if condition block braces unnecessary. Remove that as well.
Andy Shevchenko [Fri, 20 Jan 2023 15:44:33 +0000 (17:44 +0200)]
usb: fotg210-hcd: use sysfs_emit() to instead of scnprintf()
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
We need the USB fixes in here and this resolves merge conflicts as
reported in linux-next in the following files:
drivers/usb/host/xhci.c
drivers/usb/host/xhci.h
drivers/usb/typec/ucsi/ucsi.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 22 Jan 2023 00:21:56 +0000 (16:21 -0800)]
Merge tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux
Pull another io_uring fix from Jens Axboe:
"Just a single fix for a regression that happened in this release due
to a poll change. Normally I would've just deferred it to next week,
but since the original fix got picked up by stable, I think it's
better to just send this one off separately.
The issue is around the poll race fix, and how it mistakenly also got
applied to multishot polling. Those don't need the race fix, and we
should not be doing any reissues for that case. Exhaustive test cases
were written and committed to the liburing regression suite for the
reported issue, and additions for similar issues"
* tag 'io_uring-6.2-2023-01-21' of git://git.kernel.dk/linux:
io_uring/poll: don't reissue in case of poll race on multishot request
Linus Torvalds [Sat, 21 Jan 2023 19:20:55 +0000 (11:20 -0800)]
Merge tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other subsystem driver fixes for
6.2-rc5 to resolve a few reported issues. They include:
- long time pending fastrpc fixes (should have gone into 6.1, my
fault)
- mei driver/bus fixes and new device ids
- interconnect driver fixes for reported problems
- vmci bugfix
- w1 driver bugfixes for reported problems
Almost all of these have been in linux-next with no reported problems,
the rest have all passed 0-day bot testing in my tree and on the
mailing lists where they have sat too long due to me taking a long
time to catch up on my pending patch queue"
* tag 'char-misc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
VMCI: Use threaded irqs instead of tasklets
misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
gsmi: fix null-deref in gsmi_get_variable
misc: fastrpc: Fix use-after-free race condition for maps
misc: fastrpc: Don't remove map on creater_process and device_release
misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
misc: fastrpc: fix error code in fastrpc_req_mmap()
mei: me: add meteor lake point M DID
mei: bus: fix unlink on bus in error path
w1: fix WARNING after calling w1_process()
w1: fix deadloop in __w1_remove_master_device()
comedi: adv_pci1760: Fix PWM instruction handling
interconnect: qcom: rpm: Use _optional func for provider clocks
interconnect: qcom: msm8996: Fix regmap max_register values
interconnect: qcom: msm8996: Provide UFS clocks to A2NoC
dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
Linus Torvalds [Sat, 21 Jan 2023 19:17:23 +0000 (11:17 -0800)]
Merge tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small driver and kernel core fixes for 6.2-rc5. They
include:
- potential gadget fixup in do_prlimit
- device property refcount leak fix
- test_async_probe bugfix for reported problem"
* tag 'driver-core-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
prlimit: do_prlimit needs to have a speculation check
driver core: Fix test_async_probe_init saves device in wrong array
device property: fix of node refcount leak in fwnode_graph_get_next_endpoint()
Linus Torvalds [Sat, 21 Jan 2023 19:15:21 +0000 (11:15 -0800)]
Merge tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.2-rc5. It resolves a build
issue reported and Fixed by Arnd in the vc04_services driver. It's
been in linux-next this week with no reported problems"
* tag 'staging-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_arm: fix enum vchiq_status return types
Linus Torvalds [Sat, 21 Jan 2023 19:12:42 +0000 (11:12 -0800)]
Merge tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.2-rc5 that
resolve a number of tiny reported issues and some new device ids. They
include:
- new device id for the exar serial driver
- speakup tty driver bugfix
- atmel serial driver baudrate fixup
- stm32 serial driver bugfix and then revert as the bugfix broke the
build. That will come back in a later pull request once it is all
worked out properly.
- amba-pl011 serial driver rs486 mode bugfix
- qcom_geni serial driver bugfix
Most of these have been in linux-next with no reported problems (well,
other than the build breakage which generated the revert), the new
device id passed 0-day testing"
* tag 'tty-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: exar: Add support for Sealevel 7xxxC serial cards
Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler"
tty: serial: qcom_geni: avoid duplicate struct member init
serial: atmel: fix incorrect baudrate setup
tty: fix possible null-ptr-defer in spk_ttyio_release
serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler
serial: amba-pl011: fix high priority character transmission in rs486 mode
serial: pch_uart: Pass correct sg to dma_unmap_sg()
tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer
Linus Torvalds [Sat, 21 Jan 2023 19:10:03 +0000 (11:10 -0800)]
Merge tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of small USB and Thunderbolt driver fixes and new
device id changes for 6.2-rc5. Included in here are:
- thunderbolt bugfixes for reported problems
- new usb-serial driver ids added
- onboard_hub usb driver fixes for much-reported problems
- xhci bugfixes
- typec bugfixes
- ehci-fsl driver module alias fix
- iowarrior header size fix
- usb gadget driver fixes
All of these, except for the iowarrior fix, have been in linux-next
with no reported issues. The iowarrior fix passed the 0-day testing
and is a one digit change based on a reported problem in the driver
(which was written to a spec, not the real device that is now
available)"
* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
usb: host: ehci-fsl: Fix module alias
usb: dwc3: fix extcon dependency
usb: core: hub: disable autosuspend for TI TUSB8041
USB: fix misleading usb_set_intfdata() kernel doc
usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
USB: gadget: Add ID numbers to configfs-gadget driver names
usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
usb: gadget: g_webcam: Send color matching descriptor per frame
usb: typec: altmodes/displayport: Use proper macro for pin assignment check
usb: typec: altmodes/displayport: Fix pin assignment calculation
usb: typec: altmodes/displayport: Add pin assignment helper
usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
usb: misc: onboard_hub: Move 'attach' work to the driver
usb: misc: onboard_hub: Invert driver registration order
usb: ucsi: Ensure connector delayed work items are flushed
usb: musb: fix error return code in omap2430_probe()
usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
...
Linus Torvalds [Sat, 21 Jan 2023 18:56:37 +0000 (10:56 -0800)]
Merge tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Hide LDFLAGS_vmlinux from decompressor Makefiles to fix error
messages when GNU Make 4.4 is used.
- Fix 'make modules' build error when CONFIG_DEBUG_INFO_BTF_MODULES=y.
- Fix warnings emitted by GNU Make 4.4 in scripts/kconfig/Makefile.
- Support GNU Make 4.4 for scripts/jobserver-exec.
- Show clearer error message when kernel/gen_kheaders.sh fails due to
missing cpio.
* tag 'kbuild-fixes-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: explicitly validate existence of cpio command
scripts: support GNU make 4.4 in jobserver-exec
kconfig: Update all declared targets
scripts: rpm: make clear that mkspec script contains 4.13 feature
init/Kconfig: fix LOCALVERSION_AUTO help text
kbuild: fix 'make modules' error when CONFIG_DEBUG_INFO_BTF_MODULES=y
kbuild: export top-level LDFLAGS_vmlinux only to scripts/Makefile.vmlinux
init/version-timestamp.c: remove unneeded #include <linux/version.h>
docs: kbuild: remove mention to dropped $(objtree) feature
Linus Torvalds [Wed, 18 Jan 2023 04:27:23 +0000 (20:27 -0800)]
ext4: deal with legacy signed xattr name hash values
We potentially have old hashes of the xattr names generated on systems
with signed 'char' types. Now that everybody uses '-funsigned-char',
those hashes will no longer match.
This only happens if you use xattrs names that have the high bit set,
which probably doesn't happen in practice, but the xfstest generic/454
shows it.
Instead of adding a new "signed xattr hash filesystem" bit and having to
deal with all the possible combinations, just calculate the hash both
ways if the first one fails, and always generate new hashes with the
proper unsigned char version.
prlimit: do_prlimit needs to have a speculation check
do_prlimit() adds the user-controlled resource value to a pointer that
will subsequently be dereferenced. In order to help prevent this
codepath from being used as a spectre "gadget" a barrier needs to be
added after checking the range.
Linus Torvalds [Sat, 21 Jan 2023 01:13:55 +0000 (17:13 -0800)]
Merge tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a potential race condition and always set GPIOs used as interrupt
source to input in gpio-mxc
- fix a GPIO ACPI-related issue with system suspend on Clevo NL5xRU
* tag 'gpio-fixes-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRU
gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEI
gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock
Linus Torvalds [Fri, 20 Jan 2023 22:28:49 +0000 (14:28 -0800)]
Merge tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- important fix for packet signature calculation error
- three fixes to correct DFS deadlock, and DFS refresh problem
- remove an unused DFS function, and duplicate tcon refresh code
- DFS cache lookup fix
- uninitialized rc fix
* tag '6.2-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: remove unused function
cifs: do not include page data when checking signature
cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()
cifs: handle cache lookup errors different than -ENOENT
cifs: remove duplicate code in __refresh_tcon()
cifs: don't take exclusive lock for updating target hints
cifs: avoid re-lookups in dfs_cache_find()
cifs: fix potential deadlock in cache_refresh_path()
Linus Torvalds [Fri, 20 Jan 2023 22:22:56 +0000 (14:22 -0800)]
Merge tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Compilation fix for Sunplus sp7021
- Add some missing headers after a cleanup to the Nomadik driver
- Fix pull type and mux routes on Rockchip RK3568
* tag 'pinctrl-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: rockchip: fix mux route data for rk3568
pinctrl: rockchip: fix reading pull type on rk3568
pinctrl: nomadik: Add missing header(s)
pinctrl: sp7021: fix unused function warning
Jens Axboe [Fri, 20 Jan 2023 22:08:21 +0000 (15:08 -0700)]
io_uring/poll: don't reissue in case of poll race on multishot request
A previous commit fixed a poll race that can occur, but it's only
applicable for multishot requests. For a multishot request, we can safely
ignore a spurious wakeup, as we never leave the waitqueue to begin with.
A blunt reissue of a multishot armed request can cause us to leak a
buffer, if they are ring provided. While this seems like a bug in itself,
it's not really defined behavior to reissue a multishot request directly.
It's less efficient to do so as well, and not required to rearm anything
like it is for singleshot poll requests.
Linus Torvalds [Fri, 20 Jan 2023 20:44:41 +0000 (12:44 -0800)]
Merge tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"Various little tweaks all over the place:
- NVMe pull request via Christoph:
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)
- Fix a bug in the read request side request allocation caching
(Pavel)
- pktcdvd was brought back after we configured a NULL return on bio
splits, make it consistent with the others (me)
- BFQ refcount fix (Yu)
- Block cgroup policy activation fix (Yu)
- Fix for an md regression introduced in the 6.2 cycle (Adrian)"
* tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
block: fix hctx checks for batch allocation
block/rnbd-clt: fix wrong max ID in ida_alloc_max
blk-cgroup: fix missing pd_online_fn() while activating policy
pktcdvd: check for NULL returna fter calling bio_split_to_limits()
block, bfq: switch 'bfqg->ref' to use atomic refcount apis
md: fix incorrect declaration about claim_rdev in md_import_device
Linus Torvalds [Fri, 20 Jan 2023 20:39:45 +0000 (12:39 -0800)]
Merge tag 'io_uring-6.2-2023-01-20' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Fixes for the MSG_RING opcode. Nothing really major:
- Fix an overflow missing serialization around posting CQEs to the
target ring (me)
- Disable MSG_RING on a ring that isn't enabled yet. There's nothing
really wrong with allowing it, but 1) it's somewhat odd as nobody
can receive them yet, and 2) it means that using the right delivery
mechanism might change. As nobody should be sending CQEs to a ring
that isn't enabled yet, let's just disable it (Pavel)
- Tweak to when we decide to post remotely or not for MSG_RING
(Pavel)"
* tag 'io_uring-6.2-2023-01-20' of git://git.kernel.dk/linux:
io_uring/msg_ring: fix remote queue to disabled ring
io_uring/msg_ring: fix flagging remote execution
io_uring/msg_ring: fix missing lock on overflow for IOPOLL
io_uring/msg_ring: move double lock/unlock helpers higher up
Linus Torvalds [Fri, 20 Jan 2023 19:59:01 +0000 (11:59 -0800)]
Merge tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential out-of-bounds access to leaf data when seeking in an
inline file
- fix potential crash in quota when rescan races with disable
- reimplement super block signature scratching by marking page/folio
dirty and syncing block device, allow removing write_one_page
* tag 'for-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race between quota rescan and disable leading to NULL pointer deref
btrfs: fix invalid leaf access due to inline extent during lseek
btrfs: stop using write_one_page in btrfs_scratch_superblock
btrfs: factor out scratching of one regular super block
Linus Torvalds [Fri, 20 Jan 2023 19:35:21 +0000 (11:35 -0800)]
Merge tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"Fix an error seen during unconfigured LLVM builds"
* tag 'linux-kselftest-fixes-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: Fix error message for unconfigured LLVM builds
Linus Torvalds [Fri, 20 Jan 2023 19:14:41 +0000 (11:14 -0800)]
Merge tag 'thermal-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Modify __thermal_cooling_device_register() to make it call
put_device() after invoking device_register() and fix up a few error
paths calling thermal_cooling_device_destroy_sysfs() unnecessarily
(Viresh Kumar)"
* tag 'thermal-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: call put_device() only after device_register() fails
Linus Torvalds [Fri, 20 Jan 2023 19:11:35 +0000 (11:11 -0800)]
Merge tag 'acpi-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These update the ACPICA entry in MAINTAINERS, add a backlight handling
quirk and fix the ACPI PRM (platform runtime) mechanism support.
Specifics:
- Update the ACPICA development list address in MAINTAINERS to the
new one that does not bounce (Rafael Wysocki)
- Check whether EFI runtime is available when registering the ACPI
PRM address space handler and when running it (Ard Biesheuvel)
- Add backlight=native DMI quirk for Acer Aspire 4810T to the ACPI
video driver (Hans de Goede)"
* tag 'acpi-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Check whether EFI runtime is available
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 4810T
MAINTAINERS: Update the ACPICA development list address
Linus Torvalds [Fri, 20 Jan 2023 19:04:59 +0000 (11:04 -0800)]
Merge tag 'mmc-v6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- sunxi-mmc: Fix clock refcount imbalance during unbind
- sdhci-esdhc-imx: Fix some tuning settings
* tag 'mmc-v6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sunxi-mmc: Fix clock refcount imbalance during unbind
mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting
amdgpu:
- Fix display scaling
- Fix RN/CZN power reporting on some firmware versions
- Colorspace fixes
- Fix resource freeing in error case in CS IOCTL
- Fix warning on driver unload
- GC11 fixes
- DCN 3.1.4/5 S/G display workarounds"
* tag 'drm-fixes-2023-01-20' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm/amd/display: disable S/G display on DCN 3.1.4
drm/amd/display: disable S/G display on DCN 3.1.5
drm/amdgpu: allow multipipe policy on ASICs with one MEC
drm/amdgpu: correct MEC number for gfx11 APUs
drm/amd/display: fix issues with driver unload
drm/amdgpu: fix amdgpu_job_free_resources v2
drm/amd/display: Fix COLOR_SPACE_YCBCR2020_TYPE matrix
drm/amd/display: Calculate output_color_space after pixel encoding adjustment
drm/amdgpu: fix cleaning up reserved VMID on release
drm/amdgpu: Correct the power calcultion for Renior/Cezanne.
drm/amd/display: Fix set scaling doesn's work
drm/i915: Remove unused variable
drm/i915/dg2: Introduce Wa_18019271663
drm/i915/dg2: Introduce Wa_18018764978
drm/fb-helper: Set framebuffer for vga-switcheroo clients
drm/i915: Allow switching away via vga-switcheroo if uninitialized
drm/i915/selftests: Unwind hugepages to drop wakeref on error
drm/i915: re-disable RC6p on Sandy Bridge
drm/panfrost: fix GENERIC_ATOMIC64 dependency
drm/i915/display: Check source height is > 0
...
Linus Torvalds [Fri, 20 Jan 2023 18:23:14 +0000 (10:23 -0800)]
Merge tag 'dmaengine-fix-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- email address Update for Jie Hai
- fix double increment of client_count in dma_chan_get()
- idxd driver fixes: use after free, probe error handling and callback
on wq disable
- fix for qcom gpi driver GO tre
- ptdma locking fix
- tegra & imx-sdma mem leak fix
* tag 'dmaengine-fix-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
ptdma: pt_core_execute_cmd() should use spinlock
dmaengine: tegra: Fix memory leak in terminate_all()
dmaengine: xilinx_dma: call of_node_put() when breaking out of for_each_child_of_node()
dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_init
dmaengine: Fix double increment of client_count in dma_chan_get()
dmaengine: tegra210-adma: fix global intr clear
Add exception protection processing for vd in axi_chan_handle_err function
dmaengine: lgm: Move DT parsing after initialization
MAINTAINERS: update Jie Hai's email address
dmaengine: ti: k3-udma: Do conditional decrement of UDMA_CHAN_RT_PEER_BCNT_REG
dmaengine: idxd: Do not call DMX TX callbacks during workqueue disable
dmaengine: idxd: Prevent use after free on completion memory
dmaengine: idxd: Let probe fail when workqueue cannot be enabled
dmaengine: qcom: gpi: Set link_rx bit on GO TRE for rx operation
Linus Torvalds [Fri, 20 Jan 2023 17:58:44 +0000 (09:58 -0800)]
Merge tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, bluetooth, bpf and netfilter.
Current release - regressions:
- Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6
addrconf", fix nsna_ping mode of team
- wifi: mt76: fix bugs in Rx queue handling and DMA mapping
- eth: mlx5:
- add missing mutex_unlock in error reporter
- protect global IPsec ASO with a lock
Current release - new code bugs:
- rxrpc: fix wrong error return in rxrpc_connect_call()
Previous releases - regressions:
- bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2
- wifi:
- mac80211: fix crashes on Rx due to incorrect initialization of
rx->link and rx->link_sta
- mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect
aggregation handling, crashes
- brcmfmac: fix regression for Broadcom PCIe wifi devices
- rndis_wlan: prevent buffer overflow in rndis_query_oid
- netfilter: conntrack: handle tcp challenge acks during connection
reuse
- sched: avoid grafting on htb_destroy_class_offload when destroying
- virtio-net: correctly enable callback during start_xmit, fix stalls
- tcp: avoid the lookup process failing to get sk in ehash table
- ipa: disable ipa interrupt during suspend
- eth: stmmac: enable all safety features by default
Previous releases - always broken:
- bpf:
- fix pointer-leak due to insufficient speculative store bypass
mitigation (Spectre v4)
- skip task with pid=1 in send_signal_common() to avoid a splat
- fix BPF program ID information in BPF_AUDIT_UNLOAD as well as
PERF_BPF_EVENT_PROG_UNLOAD events
- fix potential deadlock in htab_lock_bucket from same bucket
index but different map_locked index
- bluetooth:
- fix a buffer overflow in mgmt_mesh_add()
- hci_qca: fix driver shutdown on closed serdev
- ISO: fix possible circular locking dependency
- CIS: hci_event: fix invalid wait context
- wifi: brcmfmac: fixes for survey dump handling
- mptcp: explicitly specify sock family at subflow creation time
- netfilter: nft_payload: incorrect arithmetics when fetching VLAN
header bits
- tcp: fix rate_app_limited to default to 1
- l2tp: close all race conditions in l2tp_tunnel_register()
- eth: mlx5: fixes for QoS config and eswitch configuration
- eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp()
- eth: stmmac: fix invalid call to mdiobus_get_phy()
Misc:
- ethtool: add netlink attr in rss get reply only if the value is not
empty"
* tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
Revert "Merge branch 'octeontx2-af-CPT'"
tcp: fix rate_app_limited to default to 1
bnxt: Do not read past the end of test names
net: stmmac: enable all safety features by default
octeontx2-af: add mbox to return CPT_AF_FLT_INT info
octeontx2-af: update cpt lf alloc mailbox
octeontx2-af: restore rxc conf after teardown sequence
octeontx2-af: optimize cpt pf identification
octeontx2-af: modify FLR sequence for CPT
octeontx2-af: add mbox for CPT LF reset
octeontx2-af: recover CPT engine when it gets fault
net: dsa: microchip: ksz9477: port map correction in ALU table entry register
selftests/net: toeplitz: fix race on tpacket_v3 block close
net/ulp: use consistent error code when blocking ULP
octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt
tcp: avoid the lookup process failing to get sk in ehash table
Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf"
MAINTAINERS: add networking entries for Willem
net: sched: gred: prevent races when adding offloads to stats
l2tp: prevent lockdep issue in l2tp_tunnel_register()
...
Pavel Begunkov [Fri, 20 Jan 2023 16:38:06 +0000 (16:38 +0000)]
io_uring/msg_ring: fix remote queue to disabled ring
IORING_SETUP_R_DISABLED rings don't have the submitter task set, so
it's not always safe to use ->submitter_task. Disallow posting msg_ring
messaged to disabled rings. Also add task NULL check for loosy sync
around testing for IORING_SETUP_R_DISABLED.
Cc: stable@vger.kernel.org Fixes: 6d043ee1164ca ("io_uring: do msg_ring in target task via tw") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Fri, 20 Jan 2023 16:38:05 +0000 (16:38 +0000)]
io_uring/msg_ring: fix flagging remote execution
There is a couple of problems with queueing a tw in io_msg_ring_data()
for remote execution. First, once we queue it the target ring can
go away and so setting IORING_SQ_TASKRUN there is not safe. Secondly,
the userspace might not expect IORING_SQ_TASKRUN.
Extract a helper and uniformly use TWA_SIGNAL without TWA_SIGNAL_NO_IPI
tricks for now, just as it was done in the original patch.
Cc: stable@vger.kernel.org Fixes: 6d043ee1164ca ("io_uring: do msg_ring in target task via tw") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Fri, 20 Jan 2023 15:08:29 +0000 (08:08 -0700)]
Merge tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme into block-6.2
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)"
* tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
Alexander Stein [Fri, 20 Jan 2023 12:27:14 +0000 (13:27 +0100)]
usb: host: ehci-fsl: Fix module alias
Commit ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent
driver module") changed DRV_NAME which was used for MODULE_ALIAS as well.
Starting from this the module alias didn't match the platform device
name created in fsl-mph-dr-of.c
Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of.
This is needed for module autoloading on ls1021a.
David Morley [Thu, 19 Jan 2023 19:00:28 +0000 (19:00 +0000)]
tcp: fix rate_app_limited to default to 1
The initial default value of 0 for tp->rate_app_limited was incorrect,
since a flow is indeed application-limited until it first sends
data. Fixing the default to be 1 is generally correct but also
specifically will help user-space applications avoid using the initial
tcpi_delivery_rate value of 0 that persists until the connection has
some non-zero bandwidth sample.
Fixes: eb8329e0a04d ("tcp: export data delivery rate") Suggested-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David Morley <morleyd@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Tested-by: David Morley <morleyd@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Wed, 18 Jan 2023 20:35:01 +0000 (12:35 -0800)]
bnxt: Do not read past the end of test names
Test names were being concatenated based on a offset beyond the end of
the first name, which tripped the buffer overflow detection logic:
detected buffer overflow in strnlen
[...]
Call Trace:
bnxt_ethtool_init.cold+0x18/0x18
Refactor struct hwrm_selftest_qlist_output to use an actual array,
and adjust the concatenation to use snprintf() rather than a series of
strncat() calls.
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/ Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com> Fixes: eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.") Cc: Michael Chan <michael.chan@broadcom.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matthew Howell [Thu, 19 Jan 2023 19:40:29 +0000 (14:40 -0500)]
serial: exar: Add support for Sealevel 7xxxC serial cards
Add support for Sealevel 7xxxC serial cards.
This patch:
* Adds IDs to recognize 7xxxC cards from Sealevel Systems.
* Updates exar_pci_probe() to set nr_ports to last two bytes of primary
dev ID for these cards.
Vishnu Dasa [Wed, 30 Nov 2022 07:05:11 +0000 (23:05 -0800)]
VMCI: Use threaded irqs instead of tasklets
The vmci_dispatch_dgs() tasklet function calls vmci_read_data()
which uses wait_event() resulting in invalid sleep in an atomic
context (and therefore potentially in a deadlock).
Use threaded irqs to fix this issue and completely remove usage
of tasklets.
Elliot Berman [Thu, 12 Jan 2023 18:23:12 +0000 (10:23 -0800)]
misc: fastrpc: Pass bitfield into qcom_scm_assign_mem
The srcvm parameter of qcom_scm_assign_mem is a pointer to a bitfield of
VMIDs. The bitfield is updated with which VMIDs have permissions
after the qcom_scm_assign_mem call. This makes it simpler for clients to
make qcom_scm_assign_mem calls later, they always pass in same srcvm
bitfield and do not need to closely track whether memory was originally
shared.
When restoring permissions to HLOS, fastrpc is incorrectly using the
first VMID directly -- neither the BIT nor the other possible VMIDs the
memory was already assigned to. We already have a field intended for
this purpose: "perms" in the struct fastrpc_channel_ctx, but it was
never used. Start using the perms field.
Cc: Abel Vesa <abel.vesa@linaro.org> Cc: Vamsi Krishna Gattupalli <quic_vgattupa@quicinc.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: e90d91190619 ("misc: fastrpc: Add support to secure memory map") Fixes: 0871561055e6 ("misc: fastrpc: Add support for audiopd") Fixes: 532ad70c6d44 ("misc: fastrpc: Add mmap request assigning for static PD pool") Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
drivers/misc/fastrpc.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
We can get EFI variables without fetching the attribute, so we must
allow for that in gsmi.
commit 859748255b43 ("efi: pstore: Omit efivars caching EFI varstore
access layer") added a new get_variable call with attr=NULL, which
triggers panic in gsmi.
Ola Jeppsson [Thu, 24 Nov 2022 17:49:41 +0000 (17:49 +0000)]
misc: fastrpc: Fix use-after-free race condition for maps
It is possible that in between calling fastrpc_map_get() until
map->fl->lock is taken in fastrpc_free_map(), another thread can call
fastrpc_map_lookup() and get a reference to a map that is about to be
deleted.
Rewrite fastrpc_map_get() to only increase the reference count of a map
if it's non-zero. Propagate this to callers so they can know if a map is
about to be deleted.
Fixes this warning:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 5 PID: 10100 at lib/refcount.c:25 refcount_warn_saturate
...
Call trace:
refcount_warn_saturate
[fastrpc_map_get inlined]
[fastrpc_map_lookup inlined]
fastrpc_map_create
fastrpc_internal_invoke
fastrpc_device_ioctl
__arm64_sys_ioctl
invoke_syscall
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221124174941.418450-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Abel Vesa [Thu, 24 Nov 2022 17:49:40 +0000 (17:49 +0000)]
misc: fastrpc: Don't remove map on creater_process and device_release
Do not remove the map from the list on error path in
fastrpc_init_create_process, instead call fastrpc_map_put, to avoid
use-after-free. Do not remove it on fastrpc_device_release either,
call fastrpc_map_put instead.
The fastrpc_free_map is the only proper place to remove the map.
This is called only after the reference count is 0.
Fixes: b49f6d83e290 ("misc: fastrpc: Fix a possible double free") Cc: stable <stable@kernel.org> Co-developed-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221124174941.418450-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Abel Vesa [Thu, 24 Nov 2022 17:49:39 +0000 (17:49 +0000)]
misc: fastrpc: Fix use-after-free and race in fastrpc_map_find
Currently, there is a race window between the point when the mutex is
unlocked in fastrpc_map_lookup and the reference count increasing
(fastrpc_map_get) in fastrpc_map_find, which can also lead to
use-after-free.
So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us
to both protect the maps list by also taking the &fl->lock spinlock and
the reference count, since the spinlock will be released only after.
Add take_ref argument to make this suitable for all callers.
Fixes: 8f6c1d8c4f0c ("misc: fastrpc: Add fdlist implementation") Cc: stable <stable@kernel.org> Co-developed-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221124174941.418450-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unconditional call to mei_cl_unlink in mei_cl_bus_dev_release leads
to call of the mei_cl_unlink without corresponding mei_cl_link.
This leads to miscalculation of open_handle_count (decrease without
increase).
Call unlink in mei_cldev_enable fail path and remove blanket unlink
from mei_cl_bus_dev_release.
Fixes: 34f1166afd67 ("mei: bus: need to unlink client before freeing") Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20221212220247.286019-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Halaney [Wed, 18 Jan 2023 16:56:38 +0000 (10:56 -0600)]
net: stmmac: enable all safety features by default
In the original implementation of dwmac5
commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.
Later it seems some implementations didn't have support for all the
features, so in
commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.
The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:
Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features.
Fixes: 5ac712dcdfef ("net: stmmac: enable platform specific safety features") Reported-by: Ning Cai <ncai@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Jan 2023 09:00:08 +0000 (09:00 +0000)]
Merge branch 'octeontx2-af-CPT'
Srujana Challa says:
====================
octeontx2-af: Miscellaneous changes for CPT
This patchset consists of miscellaneous changes for CPT.
- Adds a new mailbox to reset the requested CPT LF.
- Modify FLR sequence as per HW team suggested.
- Adds support to recover CPT engines when they gets fault.
- Updates CPT inbound inline IPsec configuration mailbox,
as per new generation of the OcteonTX2 chips.
- Adds a new mailbox to return CPT FLT Interrupt info.
---
v2:
- Addressed a review comment.
v1:
- Dropped patch "octeontx2-af: Fix interrupt name strings completely"
to submit to net.
---
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Srujana Challa [Wed, 18 Jan 2023 12:03:54 +0000 (17:33 +0530)]
octeontx2-af: add mbox to return CPT_AF_FLT_INT info
CPT HW would trigger the CPT AF FLT interrupt when CPT engines
hits some uncorrectable errors and AF is the one which receives
the interrupt and recovers the engines.
This patch adds a mailbox for CPT VFs to request for CPT faulted
and recovered engines info.
Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Srujana Challa [Wed, 18 Jan 2023 12:03:53 +0000 (17:33 +0530)]
octeontx2-af: update cpt lf alloc mailbox
The CN10K CPT coprocessor contains a context processor
to accelerate updates to the IPsec security association
contexts. The context processor contains a context cache.
This patch updates CPT LF ALLOC mailbox to config ctx_ilen
requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of
initial context fetch.
Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
octeontx2-af: restore rxc conf after teardown sequence
CN10K CPT coprocessor includes a component named RXC which
is responsible for reassembly of inner IP packets. RXC has
the feature to evict oldest entries based on age/threshold.
The age/threshold is being set to minimum values to evict
all entries at the time of teardown.
This patch adds code to restore timeout and threshold config
after teardown sequence is complete as it is global config.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Srujana Challa [Wed, 18 Jan 2023 12:03:50 +0000 (17:33 +0530)]
octeontx2-af: modify FLR sequence for CPT
On OcteonTX2 platform CPT instruction enqueue is only
possible via LMTST operations.
The existing FLR sequence mentioned in HRM requires
a dummy LMTST to CPT but LMTST can't be submitted from
AF driver. So, HW team provided a new sequence to avoid
dummy LMTST. This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Srujana Challa [Wed, 18 Jan 2023 12:03:49 +0000 (17:33 +0530)]
octeontx2-af: add mbox for CPT LF reset
On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs.
This patch adds a new mailbox for CPT VFs to request for CPT LF
reset.
Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Fri, 20 Jan 2023 01:17:11 +0000 (11:17 +1000)]
Merge tag 'drm-misc-fixes-2023-01-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix for vc4 to address a memory leak when allocating a buffer, a
Kconfig fix for panfrost and two fixes for i915 and fb-helper to
address some bugs with vga-switcheroo.
Linus Torvalds [Thu, 19 Jan 2023 23:22:28 +0000 (15:22 -0800)]
Merge tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Prevent reading into undefined memory in the expression lexer,
accounting for a trailer backslash followed by the null byte.
- Fix file mode when copying files to the build id cache, the problem
happens when the cache directory is in a different file system than
the file being cached, otherwise the mode was preserved as only a
hard link would be done to save space.
- Fix a related build-id 'perf test' entry that checked that permission
when caching PE (Portable Executable) files, used when profiling
Windows executables under wine.
- Sync the tools/ copies of kvm headers, build_bug.h, socket.h and
arm64's cputype.h with the kernel sources.
* tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf test build-id: Fix test check for PE file
perf buildid-cache: Fix the file mode with copyfile() while adding file to build-id cache
perf expr: Prevent normalize() from reading into undefined memory in the expression lexer
tools headers: Syncronize linux/build_bug.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools kvm headers arm64: Update KVM header from the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
Dave Airlie [Thu, 19 Jan 2023 21:49:00 +0000 (07:49 +1000)]
Merge tag 'drm-msm-fixes-2023-01-16' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
msm-fixes for v6.3-rc5
Two GPU fixes which were meant to be part of the previous pull request,
but I'd forgotten to fetch from gitlab after the MR was merged so that
git tag was applied to the wrong commit.
Linus Torvalds [Thu, 19 Jan 2023 20:32:07 +0000 (12:32 -0800)]
Merge tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Prevent a potential deadlock when configuring kgdb console
- Fix a kernel doc warning
* tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
kernel/printk/printk.c: Fix W=1 kernel-doc warning
tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
Linus Torvalds [Thu, 19 Jan 2023 20:28:53 +0000 (12:28 -0800)]
Merge tag 's390-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 build fix from Heiko Carstens:
- Workaround invalid gcc-11 out of bounds read warning caused by s390's
S390_lowcore definition. This happens only with gcc 11.1.0 and
11.2.0.
The code which causes this warning will be gone with the next merge
window. Therefore just replace the memcpy() with a for loop to get
rid of the warning.
* tag 's390-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: workaround invalid gcc-11 out of bounds read warning
Viresh Kumar [Wed, 18 Jan 2023 08:38:24 +0000 (14:08 +0530)]
thermal: core: call put_device() only after device_register() fails
put_device() shouldn't be called before a prior call to
device_register(). __thermal_cooling_device_register() doesn't follow
that properly and needs fixing. Also
thermal_cooling_device_destroy_sysfs() is getting called unnecessarily
on few error paths.
Fix all this by placing the calls at the right place.
Based on initial work done by Caleb Connolly.
Fixes: 4748f9687caa ("thermal: core: fix some possible name leaks in error paths") Fixes: c408b3d1d9bb ("thermal: Validate new state in cur_state_store()") Reported-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Frank Rowand <frowand.list@gmail.com> Reviewed-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
projects / thirdparty / kernel / linux.git / log
