Naveen N Rao [Wed, 30 Oct 2024 07:08:42 +0000 (12:38 +0530)]
powerpc64/bpf: Fold bpf_jit_emit_func_call_hlp() into bpf_jit_emit_func_call_rel()
Commit 61688a82e047 ("powerpc/bpf: enable kfunc call") enhanced
bpf_jit_emit_func_call_hlp() to handle calls out to module region, where
bpf progs are generated. The only difference now between
bpf_jit_emit_func_call_hlp() and bpf_jit_emit_func_call_rel() is in
handling of the initial pass where target function address is not known.
Fold that logic into bpf_jit_emit_func_call_hlp() and rename it to
bpf_jit_emit_func_call_rel() to simplify bpf function call JIT code.
We don't actually need to load/restore TOC across a call out to a
different kernel helper or to a different bpf program since they all
work with the kernel TOC. We only need to do it if we have to call out
to a module function. So, guard TOC load/restore with appropriate
conditions.
Naveen N Rao [Wed, 30 Oct 2024 07:08:41 +0000 (12:38 +0530)]
powerpc/ftrace: Move ftrace stub used for init text before _einittext
Move the ftrace stub used to cover inittext before _einittext so that it
is within kernel text, as seen through core_kernel_text(). This is
required for a subsequent change to ftrace.
Naveen N Rao [Wed, 30 Oct 2024 07:08:40 +0000 (12:38 +0530)]
powerpc/ftrace: Skip instruction patching if the instructions are the same
To simplify upcoming changes to ftrace, add a check to skip actual
instruction patching if the old and new instructions are the same. We
still validate that the instruction is what we expect, but don't
actually patch the same instruction again.
Naveen N Rao [Wed, 30 Oct 2024 07:08:39 +0000 (12:38 +0530)]
powerpc/ftrace: Remove pointer to struct module from dyn_arch_ftrace
Pointer to struct module is only relevant for ftrace records belonging
to kernel modules. Having this field in dyn_arch_ftrace wastes memory
for all ftrace records belonging to the kernel. Remove the same in
favour of looking up the module from the ftrace record address, similar
to other architectures.
Naveen N Rao [Wed, 30 Oct 2024 07:08:37 +0000 (12:38 +0530)]
powerpc32/ftrace: Unify 32-bit and 64-bit ftrace entry code
On 32-bit powerpc, gcc generates a three instruction sequence for
function profiling:
mflr r0
stw r0, 4(r1)
bl _mcount
On kernel boot, the call to _mcount() is nop-ed out, to be patched back
in when ftrace is actually enabled. The 'stw' instruction therefore is
not necessary unless ftrace is enabled. Nop it out during ftrace init.
When ftrace is enabled, we want the 'stw' so that stack unwinding works
properly. Perform the same within the ftrace handler, similar to 64-bit
powerpc.
Naveen N Rao [Wed, 30 Oct 2024 07:08:36 +0000 (12:38 +0530)]
powerpc64/ftrace: Nop out additional 'std' instruction emitted by gcc v5.x
Gcc v5.x emits a 3-instruction sequence for -mprofile-kernel:
mflr r0
std r0, 16(r1)
bl _mcount
Gcc v6.x moved to a simpler 2-instruction sequence by removing the 'std'
instruction. The store saved the return address in the LR save area in
the caller stack frame for stack unwinding. However, with dynamic
ftrace, we no longer have a call to _mcount on kernel boot when ftrace
is not enabled. When ftrace is enabled, that store is performed within
ftrace_caller(). As such, the additional 'std' instruction is redundant.
Nop it out on kernel boot.
With this change, we now use the same 2-instruction profiling sequence
with both -mprofile-kernel, as well as -fpatchable-function-entry on
64-bit powerpc.
Naveen N Rao [Wed, 30 Oct 2024 07:08:35 +0000 (12:38 +0530)]
powerpc/kprobes: Use ftrace to determine if a probe is at function entry
Rather than hard-coding the offset into a function to be used to
determine if a kprobe is at function entry, use ftrace_location() to
determine the ftrace location within the function and categorize all
instructions till that offset to be function entry.
For functions that cannot be traced, we fall back to using a fixed
offset of 8 (two instructions) to categorize a probe as being at
function entry for 64-bit elfv2, unless we are using pcrel.
Naveen N Rao [Wed, 30 Oct 2024 07:08:34 +0000 (12:38 +0530)]
powerpc/trace: Account for -fpatchable-function-entry support by toolchain
So far, we have relied on the fact that gcc supports both
-mprofile-kernel, as well as -fpatchable-function-entry, and clang
supports neither. Our Makefile only checks for CONFIG_MPROFILE_KERNEL to
decide which files to build. Clang has a feature request out [*] to
implement -fpatchable-function-entry, and is unlikely to support
-mprofile-kernel.
Update our Makefile checks so that we pick up the correct files to build
once clang picks up support for -fpatchable-function-entry.
The help text refers to lilo, but the install script does not run lilo
and never has. The reference to lilo seems to have come originally from
arch/ppc/Makefile, but it was not true there either.
Drop the include of dma-mapping.h in machdep.h, replace it with forward
declarations of struct device and struct pci_dev, and include time64.h
and page.h which are required for time64_t and pgprot_t respectively.
Add direct includes of some other headers to some files that were
getting them via machdep.h.
powerpc: Adjust adding stack protector flags to KBUILD_CLAGS for clang
After fixing the HAVE_STACKPROTECTER checks for clang's in-progress
per-task stack protector support [1], the build fails during prepare0
because '-mstack-protector-guard-offset' has not been added to
KBUILD_CFLAGS yet but the other '-mstack-protector-guard' flags have.
clang: error: '-mstack-protector-guard=tls' is used without '-mstack-protector-guard-offset', and there is no default
clang: error: '-mstack-protector-guard=tls' is used without '-mstack-protector-guard-offset', and there is no default
make[4]: *** [scripts/Makefile.build:229: scripts/mod/empty.o] Error 1
make[4]: *** [scripts/Makefile.build:102: scripts/mod/devicetable-offsets.s] Error 1
Mirror other architectures and add all '-mstack-protector-guard' flags
to KBUILD_CFLAGS atomically during stack_protector_prepare, which
resolves the issue and allows clang's implementation to fully work with
the kernel.
powerpc: Fix stack protector Kconfig test for clang
Clang's in-progress per-task stack protector support [1] does not work
with the current Kconfig checks because '-mstack-protector-guard-offset'
is not provided, unlike all other architecture Kconfig checks.
This produces an error from clang, which is interpreted as the flags not
being supported at all when they really are.
$ clang --target=powerpc64-linux-gnu \
-mstack-protector-guard=tls \
-mstack-protector-guard-reg=r13 \
-c -o /dev/null -x c /dev/null
clang: error: '-mstack-protector-guard=tls' is used without '-mstack-protector-guard-offset', and there is no default
This argument will always be provided by the build system, so mirror
other architectures and use '-mstack-protector-guard-offset=0' for
testing support, which fixes the issue for clang and does not regress
support with GCC.
Even with the first problem addressed, the 32-bit test continues to fail
because Kbuild uses the powerpc64le-linux-gnu target for clang and
nothing flips the target to 32-bit, resulting in an error about an
invalid register valid:
$ clang --target=powerpc64le-linux-gnu \
-mstack-protector-guard=tls
-mstack-protector-guard-reg=r2 \
-mstack-protector-guard-offset=0 \
-x c -c -o /dev/null /dev/null
clang: error: invalid value 'r2' in 'mstack-protector-guard-reg=', expected one of: r13
While GCC allows arbitrary registers, the implementation of
'-mstack-protector-guard=tls' in LLVM shares the same code path as the
user space thread local storage implementation, which uses a fixed
register (2 for 32-bit and 13 for 62-bit), so the command line parsing
enforces this limitation.
Use the Kconfig macro '$(m32-flag)', which expands to '-m32' when
supported, in the stack protector support cc-option call to properly
switch the target to a 32-bit one, which matches what happens in Kbuild.
While the 64-bit macro does not strictly need it, add the equivalent
64-bit option for symmetry.
book3s64/hash: Early detect debug_pagealloc size requirement
Add hash_supports_debug_pagealloc() helper to detect whether
debug_pagealloc can be supported on hash or not. This checks for both,
whether debug_pagealloc config is enabled and the linear map should
fit within rma_size/4 region size.
This can then be used early during htab_init_page_sizes() to decide
linear map pagesize if hash supports either debug_pagealloc or
kfence.
Enable kfence on book3s64 hash only when early init is enabled.
This is because, kfence could cause the kernel linear map to be mapped
at PAGE_SIZE level instead of 16M (which I guess we don't want).
Also currently there is no way to -
1. Make multiple page size entries for the SLB used for kernel linear
map.
2. No easy way of getting the hash slot details after the page table
mapping for kernel linear setup. So even if kfence allocate the
pool in late init, we won't be able to get the hash slot details in
kfence linear map.
Thus this patch disables kfence on hash if kfence early init is not
enabled.
book3s64/radix: Refactoring common kfence related functions
Both radix and hash on book3s requires to detect if kfence
early init is enabled or not. Hash needs to disable kfence
if early init is not enabled because with kfence the linear map is
mapped using PAGE_SIZE rather than 16M mapping.
We don't support multiple page sizes for slb entry used for kernel
linear map in book3s64.
This patch refactors out the common functions required to detect kfence
early init is enabled or not.
Now that linear map functionality of debug_pagealloc is made generic,
enable kfence to use this generic infrastructure.
1. Define kfence related linear map variables.
- u8 *linear_map_kf_hash_slots;
- unsigned long linear_map_kf_hash_count;
- DEFINE_RAW_SPINLOCK(linear_map_kf_hash_lock);
2. The linear map size allocated in RMA region is quite small
(KFENCE_POOL_SIZE >> PAGE_SHIFT) which is 512 bytes by default.
3. kfence pool memory is reserved using memblock_phys_alloc() which has
can come from anywhere.
(default 255 objects => ((1+255) * 2) << PAGE_SHIFT = 32MB)
4. The hash slot information for kfence memory gets added in linear map
in hash_linear_map_add_slot() (which also adds for debug_pagealloc).
book3s64/hash: Disable debug_pagealloc if it requires more memory
Make size of the linear map to be allocated in RMA region to be of
ppc64_rma_size / 4. If debug_pagealloc requires more memory than that
then do not allocate any memory and disable debug_pagealloc.
book3s64/hash: Make kernel_map_linear_page() generic
Currently kernel_map_linear_page() function assumes to be working on
linear_map_hash_slots array. But since in later patches we need a
separate linear map array for kfence, hence make
kernel_map_linear_page() take a linear map array and lock in it's
function argument.
This is needed to separate out kfence from debug_pagealloc
infrastructure.
book3s64/hash: Add hash_debug_pagealloc_alloc_slots() function
This adds hash_debug_pagealloc_alloc_slots() function instead of open
coding that in htab_initialize(). This is required since we will be
separating the kfence functionality to not depend upon debug_pagealloc.
Now that everything required for debug_pagealloc is under a #ifdef
config. Bring in linear_map_hash_slots and linear_map_hash_count
variables under the same config too.
book3s64/hash: Add hash_debug_pagealloc_add_slot() function
This adds hash_debug_pagealloc_add_slot() function instead of open
coding that in htab_bolt_mapping(). This is required since we will be
separating kfence functionality to not depend upon debug_pagealloc.
book3s64/hash: Refactor kernel linear map related calls
This just brings all linear map related handling at one place instead of
having those functions scattered in hash_utils file.
Makes it easy for review.
Kfence on book3s Hash on pseries is anyways broken. It fails to boot
due to RMA size limitation. That is because, kfence with Hash uses
debug_pagealloc infrastructure. debug_pagealloc allocates linear map
for entire dram size instead of just kfence relevant objects.
This means for 16TB of DRAM it will require (16TB >> PAGE_SHIFT)
which is 256MB which is half of RMA region on P8.
crash kernel reserves 256MB and we also need 2048 * 16KB * 3 for
emergency stack and some more for paca allocations.
That means there is not enough memory for reserving the full linear map
in the RMA region, if the DRAM size is too big (>=16TB)
(The issue is seen above 8TB with crash kernel 256 MB reservation).
Now Kfence does not require linear memory map for entire DRAM.
It only needs for kfence objects. So this patch temporarily removes the
kfence functionality since debug_pagealloc code needs some refactoring.
We will bring in kfence on Hash support in later patches.
copy_from_kernel_nofault() can be called when doing read of /proc/kcore.
/proc/kcore can have some unmapped kfence objects which when read via
copy_from_kernel_nofault() can cause page faults. Since *_nofault()
functions define their own fixup table for handling fault, use that
instead of asking kfence to handle such faults.
Hence we search the exception tables for the nip which generated the
fault. If there is an entry then we let the fixup table handler handle the
page fault by returning an error from within ___do_page_fault().
This can be easily triggered if someone tries to do dd from /proc/kcore.
eg. dd if=/proc/kcore of=/dev/null bs=1M
Some example false negatives:
===============================
BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0
Invalid read at 0xc0000000fdff0000:
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec
BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0
Use-after-free read at 0xc0000000fe050000 (in kfence-#2):
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec
powerpc/fadump: Move fadump_cma_init to setup_arch() after initmem_init()
During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE,
since pageblock_order is still zero and it gets initialized
later during initmem_init() e.g.
setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order()
One such use case where this causes issue is -
early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init()
This causes CMA memory alignment check to be bypassed in
cma_init_reserved_mem(). Then later cma_activate_area() can hit
a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory
area was not pageblock_order aligned.
Fix it by moving the fadump_cma_init() after initmem_init(),
where other such cma reservations also gets called.
Fixes: 11ac3e87ce09 ("mm: cma: use pageblock_order as the single alignment") Suggested-by: David Hildenbrand <david@redhat.com> Reported-by: Sachin P Bappalige <sachinpb@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/3ae208e48c0d9cefe53d2dc4f593388067405b7d.1729146153.git.ritesh.list@gmail.com
powerpc/fadump: Reserve page-aligned boot_memory_size during fadump_reserve_mem
This patch refactors all CMA related initialization and alignment code
to within fadump_cma_init() which gets called in the end. This also means
that we keep [reserve_dump_area_start, boot_memory_size] page aligned
during fadump_reserve_mem(). Then later in fadump_cma_init() we extract the
aligned chunk and provide it to CMA. This inherently also fixes an issue in
the current code where the reserve_dump_area_start is not aligned
when the physical memory can have holes and the suitable chunk starts at
an unaligned boundary.
After this we should be able to call fadump_cma_init() independently
later in setup_arch() where pageblock_order is non-zero.
powerpc/fadump: Refactor and prepare fadump_cma_init for late init
We anyway don't use any return values from fadump_cma_init(). Since
fadump_reserve_mem() from where fadump_cma_init() gets called today,
already has the required checks.
This patch makes this function return type as void. Let's also handle
extra cases like return if fadump_supported is false or dump_active, so
that in later patches we can call fadump_cma_init() separately from
setup_arch().
Symbol table '.dynsym' contains 12 entries:
Num: Value Size Type Bind Vis Ndx Name
...
1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
...
4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
Symbol table '.symtab' contains 56 entries:
Num: Value Size Type Bind Vis Ndx Name
...
45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu
47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres
To overcome that, commit ba83b3239e65 ("selftests: vDSO: fix vDSO
symbols lookup for powerpc64") was applied to have selftests also
look for NOTYPE symbols, but the correct fix should be to flag VDSO
entry points as functions.
The original commit that brought VDSO support into powerpc/64 has the
following explanation:
Note that the symbols exposed by the vDSO aren't "normal" function symbols, apps
can't be expected to link against them directly, the vDSO's are both seen
as if they were linked at 0 and the symbols just contain offsets to the
various functions. This is done on purpose to avoid a relocation step
(ppc64 functions normally have descriptors with abs addresses in them).
When glibc uses those functions, it's expected to use it's own trampolines
that know how to reach them.
The descriptors it's talking about are the OPD function descriptors
used on ABI v1 (big endian). But it would be more correct for a text
symbol to have type function, even if there's no function descriptor
for it.
glibc has a special case already for handling the VDSO symbols which
creates a fake opd pointing at the kernel symbol. So changing the VDSO
symbol type to function shouldn't affect that.
For ABI v2, there is no function descriptors and VDSO functions can
safely have function type.
So lets flag VDSO entry points as functions and revert the
selftest change.
VDSO time functions do not call any other function, so they don't
need to save/restore LR. However, retrieving the address of VDSO data
page requires using LR hence saving then restoring it, which can be
heavy on some CPUs. On the other hand, VDSO functions on powerpc are
not standard functions and require a wrapper function to call C VDSO
functions. And that wrapper has to save and restore LR in order to
call the C VDSO function, so retrieving VDSO data page address in that
wrapper doesn't require additional save/restore of LR.
For random VDSO functions it is a bit different. Because the function
calls __arch_chacha20_blocks_nostack(), it saves and restores LR.
Retrieving VDSO data page address can then be done there without
additional save/restore of LR.
So lets implement __arch_get_vdso_rng_data() and simplify the wrapper.
It starts paving the way for the day powerpc will implement a more
standard ABI for VDSO functions.
The page containing VDSO time data is swapped with the one containing
TIME namespace data when a process uses a non-root time namespace.
For other data like powerpc specific data and RNG data, it means
tracking whether time namespace is the root one or not to know which
page to use.
Simplify the logic behind by moving time data out of first data page
so that the first data page which contains everything else always
remains the first page. Time data is in the second or third page
depending on selected time namespace.
While we are playing with get_datapage macro, directly take into
account the data offset inside the macro instead of adding that offset
afterwards.
Linus Torvalds [Sun, 6 Oct 2024 18:34:55 +0000 (11:34 -0700)]
Merge tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: Remove blank first line from maint scripts
kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
scripts: import more list macros
kconfig: qconf: fix buffer overflow in debug links
kconfig: qconf: move conf_read() before drawing tree pain
kconfig: clear expr::val_is_valid when allocated
kconfig: fix infinite loop in sym_calc_choice()
kbuild: move non-boot built-in DTBs to .rodata section
Linus Torvalds [Sun, 6 Oct 2024 18:11:01 +0000 (11:11 -0700)]
Merge tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
platform/x86: wmi: Update WMI driver API documentation
platform/x86: dell-ddv: Fix typo in documentation
platform/x86: dell-sysman: add support for alienware products
platform/x86/intel: power-domains: Add Diamond Rapids support
platform/x86: ISST: Add Diamond Rapids to support list
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
MAINTAINERS: Update Intel In Field Scan(IFS) entry
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Linus Torvalds [Sun, 6 Oct 2024 17:53:28 +0000 (10:53 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
Aaron Thompson [Fri, 4 Oct 2024 07:52:45 +0000 (07:52 +0000)]
kbuild: deb-pkg: Remove blank first line from maint scripts
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5efc ("kbuild: deb-pkg: split image and debug objects staging out into functions") Signed-off-by: Aaron Thompson <dev@aaront.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Hans de Goede [Sat, 5 Oct 2024 13:05:45 +0000 (15:05 +0200)]
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.
Fixes: 5eba0141206e ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs") Fixes: e2200d3f26da ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()") Cc: stable@vger.kernel.org Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru> Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
Armin Wolf [Sat, 5 Oct 2024 21:38:24 +0000 (23:38 +0200)]
platform/x86: wmi: Update WMI driver API documentation
The WMI driver core now passes the WMI event data to legacy notify
handlers, so WMI devices sharing notification IDs are now being
handled properly.
Fixes: e04e2b760ddb ("platform/x86: wmi: Pass event data directly to legacy notify handlers") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Thu, 3 Oct 2024 20:26:13 +0000 (22:26 +0200)]
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
There have been multiple reports that the ACPI PM Timer disabling is
causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3,
hibernate) methods.
Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from
spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to
fix the hang on suspend.
Fixes: e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/ Reported-by: Todd Brandt <todd.e.brandt@intel.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346 Cc: Marek Maslanka <mmaslanka@google.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Todd Brandt <todd.e.brandt@intel.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com
Armin Wolf [Tue, 1 Oct 2024 21:28:35 +0000 (23:28 +0200)]
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org> Fixes: ab58016c68cc ("platform/x86:dell-laptop: Add knobs to change battery charge settings") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Jithu Joseph [Tue, 1 Oct 2024 17:08:08 +0000 (10:08 -0700)]
MAINTAINERS: Update Intel In Field Scan(IFS) entry
Ashok is no longer with Intel and his e-mail address will start bouncing
soon. Update his email address to the new one he provided to ensure
correct contact details in the MAINTAINERS file.
Paolo Bonzini [Tue, 1 Oct 2024 14:34:58 +0000 (10:34 -0400)]
x86/reboot: emergency callbacks are now registered by common KVM code
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Fixes: 6d55a94222db ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 1 Oct 2024 14:15:01 +0000 (10:15 -0400)]
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled. In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.
Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.
This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled. The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sat, 5 Oct 2024 22:18:04 +0000 (15:18 -0700)]
Merge tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"A lot of little fixes, bigger ones include:
- bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
changes, now fixed along with another lost wakeup
- fragmentation LRU fixes; fsck now repairs successfully (this is the
data structure copygc uses); along with some nice simplification.
- Rework logged op error handling, so that if logged op replay errors
(due to another filesystem error) we delete the logged op instead
of going into an infinite loop)
- Various small filesystem connectivitity repair fixes"
* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
bcachefs: Rework logged op error handling
bcachefs: Add warn param to subvol_get_snapshot, peek_inode
bcachefs: Kill snapshot arg to fsck_write_inode()
bcachefs: Check for unlinked, non-empty dirs in check_inode()
bcachefs: Check for unlinked inodes with dirents
bcachefs: Check for directories with no backpointers
bcachefs: Kill alloc_v4.fragmentation_lru
bcachefs: minor lru fsck fixes
bcachefs: Mark more errors AUTOFIX
bcachefs: Make sure we print error that causes fsck to bail out
bcachefs: bkey errors are only AUTOFIX during read
bcachefs: Create lost+found in correct snapshot
bcachefs: Fix reattach_inode()
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
bcachefs: Fix trans_commit disk accounting revert
bcachefs: Fix bch2_inode_is_open() check
bcachefs: Fix return type of dirent_points_to_inode_nowarn()
bcachefs: Fix bad shift in bch2_read_flag_list()
Linus Torvalds [Sat, 5 Oct 2024 17:47:00 +0000 (10:47 -0700)]
Merge tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix some ext4 bugs and regressions relating to oneline resize and fast
commits"
* tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off by one issue in alloc_flex_gd()
ext4: mark fc as ineligible using an handle in ext4_xattr_set()
ext4: use handle to mark fc as ineligible in __track_dentry_update()
Linus Torvalds [Sat, 5 Oct 2024 17:31:04 +0000 (10:31 -0700)]
Merge tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
- Fix potential deadlock during runtime suspend and resume (stm32f7)
* tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
Linus Torvalds [Sat, 5 Oct 2024 17:25:04 +0000 (10:25 -0700)]
Merge tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of driver specific fixes that came in since the merge
window, about half of which is fixes for correctness in the use of the
runtime PM APIs done as part of a broader cleanup"
* tag 'spi-fix-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: s3c64xx: fix timeout counters in flush_fifo
spi: atmel-quadspi: Fix wrong register value written to MR
spi: spi-cadence: Fix missing spi_controller_is_target() check
spi: spi-cadence: Fix pm_runtime_set_suspended() with runtime pm enabled
spi: spi-imx: Fix pm_runtime_set_suspended() with runtime pm enabled
Linus Torvalds [Sat, 5 Oct 2024 17:19:14 +0000 (10:19 -0700)]
Merge tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- gcc plugins: Avoid Kconfig warnings with randstruct (Nathan
Chancellor)
- MAINTAINERS: Add security/Kconfig.hardening to hardening section
(Nathan Chancellor)
- MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
* tag 'hardening-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: Add security/Kconfig.hardening to hardening section
hardening: Adjust dependencies in selection of MODVERSIONS
MAINTAINERS: Add unsafe_memcpy() to the FORTIFY review list
Linus Torvalds [Sat, 5 Oct 2024 17:10:45 +0000 (10:10 -0700)]
Merge tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm revert from Paul Moore:
"Here is the CONFIG_SECURITY_TOMOYO_LKM revert that we've been
discussing this week. With near unanimous agreement that the original
TOMOYO patches were not the right way to solve the distro problem
Tetsuo is trying the solve, reverting is our best option at this time"
* tag 'lsm-pr-20241004' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
tomoyo: revert CONFIG_SECURITY_TOMOYO_LKM support
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds".
kasan report:
[ 19.411889] ==================================================================
[ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113
[ 19.417368]
[ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10
[ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022
[ 19.422687] Call Trace:
[ 19.424091] <TASK>
[ 19.425448] dump_stack_lvl+0x5d/0x80
[ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.428694] print_report+0x19d/0x52e
[ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.433539] kasan_report+0xf0/0x170
[ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common]
[ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10
[ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common]
[ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common]
[ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360
[ 19.444797] cpuhp_invoke_callback+0x221/0xec0
[ 19.446337] cpuhp_thread_fun+0x21b/0x610
[ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10
[ 19.449354] smpboot_thread_fn+0x2e7/0x6e0
[ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 19.452405] kthread+0x29c/0x350
[ 19.453817] ? __pfx_kthread+0x10/0x10
[ 19.455253] ret_from_fork+0x31/0x70
[ 19.456685] ? __pfx_kthread+0x10/0x10
[ 19.458114] ret_from_fork_asm+0x1a/0x30
[ 19.459573] </TASK>
[ 19.460853]
[ 19.462055] Allocated by task 1198:
[ 19.463410] kasan_save_stack+0x30/0x50
[ 19.464788] kasan_save_track+0x14/0x30
[ 19.466139] __kasan_kmalloc+0xaa/0xb0
[ 19.467465] __kmalloc+0x1cd/0x470
[ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common]
[ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr]
[ 19.471670] do_one_initcall+0xa4/0x380
[ 19.472903] do_init_module+0x238/0x760
[ 19.474105] load_module+0x5239/0x6f00
[ 19.475285] init_module_from_file+0xd1/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.476506] idempotent_init_module+0x23b/0x650
[ 19.477725] __x64_sys_finit_module+0xbe/0x130
[ 19.478920] do_syscall_64+0x82/0x160
[ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 19.481292]
[ 19.482205] The buggy address belongs to the object at ffff888829e65000
which belongs to the cache kmalloc-512 of size 512
[ 19.484818] The buggy address is located 0 bytes to the right of
allocated 512-byte region [ffff888829e65000, ffff888829e65200)
[ 19.487447]
[ 19.488328] The buggy address belongs to the physical page:
[ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60
[ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff)
[ 19.493914] page_type: 0xffffffff()
[ 19.494988] raw: 0057ffffc0000840ffff88810004cc8000000000000000000000000000000001
[ 19.496451] raw: ffff888829e60c00000000008020001800000001ffffffff0000000000000000
[ 19.497906] head: 0057ffffc0000840ffff88810004cc8000000000000000000000000000000001
[ 19.499379] head: ffff888829e60c00000000008020001800000001ffffffff0000000000000000
[ 19.500844] head: 0057ffffc0000003ffffea0020a79801ffffea0020a7984800000000ffffffff
[ 19.502316] head: 0000000800000000000000000000000000000000ffffffff0000000000000000
[ 19.503784] page dumped because: kasan: bad access detected
[ 19.505058]
[ 19.505970] Memory state around the buggy address:
[ 19.507172] ffff888829e65100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.508599] ffff888829e65180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 19.510013] >ffff888829e65200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510014] ^
[ 19.510016] ffff888829e65280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.510018] ffff888829e65300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 19.515367] ==================================================================
The reason for this error is physical_package_ids assigned by VMware VMM
are not continuous and have gaps. This will cause value returned by
topology_physical_package_id() to be more than topology_max_packages().
Here the allocation uses topology_max_packages(). The call to
topology_max_packages() returns maximum logical package ID not physical
ID. Hence use topology_logical_package_id() instead of
topology_physical_package_id().
Fixes: 9a1aac8a96dc ("platform/x86: ISST: PUNIT device mapping with Sub-NUMA clustering") Cc: stable@vger.kernel.org Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zach Wade <zachwade.k@gmail.com> Link: https://lore.kernel.org/r/20240923144508.1764-1-zachwade.k@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Linus Torvalds [Sat, 5 Oct 2024 00:30:59 +0000 (17:30 -0700)]
Merge tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings, install scripts, run-time error path, and git
status cleanups to tests:
- devices/probe: fix for Python3 regex string syntax warnings
- clone3: removing unused macro from clone3_cap_checkpoint_restore()
- vDSO: fix to align getrandom states to cache line
- core and exec: add missing executables to .gitignore files
- rtc: change to skip test if /dev/rtc0 can't be accessed
- timers/posix: fix warn_unused_result result in __fatal_error()
- breakpoints: fix to detect suspend successful condition correctly
- hid: fix to install required dependencies to run the test"
* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoints: use remaining time to check if suspend succeed
kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
selftest: hid: add missing run-hid-tools-tests.sh
selftests: vDSO: align getrandom states to cache line
selftests: exec: update gitignore for load_address
selftests: core: add unshare_test to gitignore
clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
selftest: rtc: Check if could access /dev/rtc0 before testing
Kent Overstreet [Tue, 24 Sep 2024 02:06:58 +0000 (22:06 -0400)]
bcachefs: Rework logged op error handling
Initially it was thought that we just wanted to ignore errors from
logged op replay, but it turns out we do need to catch -EROFS, or we'll
go into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 30 Sep 2024 04:00:33 +0000 (00:00 -0400)]
bcachefs: Kill snapshot arg to fsck_write_inode()
It was initially believed that it would be better to be explicit about
the snapshot we're updating when writing inodes in fsck; however, it
turns out that passing around the snapshot separately is more error
prone and we're usually updating the inode in the same snapshow we read
it from.
This is different from normal filesystem paths, where we do the update
in the snapshot of the subvolume we're in.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 30 Sep 2024 03:38:37 +0000 (23:38 -0400)]
bcachefs: Check for unlinked, non-empty dirs in check_inode()
We want to check for this early so it can be reattached if necessary in
check_unreachable_inodes(); better than letting it be deleted and having
the children reattached, losing their filenames.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Mon, 30 Sep 2024 02:38:04 +0000 (22:38 -0400)]
bcachefs: Check for unlinked inodes with dirents
link count works differently in bcachefs - it's only nonzero for files
with multiple hardlinks, which means we can also avoid checking it
except for files that are known to have hardlinks.
That means we need a few different checks instead; in particular, we
don't want fsck to delet a file that has a dirent pointing to it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Sat, 28 Sep 2024 19:27:37 +0000 (15:27 -0400)]
bcachefs: Check for directories with no backpointers
It's legal for regular files to have missing backpointers (due to
hardlinks), and fsck should automatically add them, but for directories
this is an error that should be flagged.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Tue, 1 Oct 2024 23:08:37 +0000 (19:08 -0400)]
bcachefs: Kill alloc_v4.fragmentation_lru
The fragmentation_lru field hasn't been needed since we reworked the LRU
btrees to use the btree write buffer; previously it was used to resolve
collisions, but the revised LRU btree uses the backpointer (the bucket)
as part of the key.
It should have been deleted at the time of the LRU rework; since it
wasn't, that left places for bugs to hide, in check/repair.
This fixes LRU fsck on a filesystem image helpfully provided by a user
who disappeared before I could get his name for the reported-by.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Tue, 1 Oct 2024 20:40:33 +0000 (16:40 -0400)]
bcachefs: minor lru fsck fixes
check_lru_key() wasn't using write buffer updates for deleting bad lru
entries - dating from before the lru btree used the btree write buffer.
And when possibly flushing the btree write buffer (to make sure we're
seeing a real inconsistency), we need to be using the modern
bch2_btree_write_buffer_maybe_flush().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Sat, 28 Sep 2024 06:44:12 +0000 (02:44 -0400)]
bcachefs: Fix reattach_inode()
Ensure a copy of the lost+found inode exists in the snapshot that we're
reattaching, so that we don't trigger warnings in
lookup_inode_for_snapshot() later.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Fri, 4 Oct 2024 23:44:32 +0000 (19:44 -0400)]
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
This fixes two different bugs:
- Looser locking with the rhashtable means we need to recheck if the
inode is still hashed after prepare_to_wait(), and add a corresponding
wakeup after removing from the hash table.
- da18ecbf0fb6 ("fs: add i_state helpers") changed the bit waitqueues
used for inodes, and bcachefs wasn't updated and thus broke; this
updates bcachefs to the new helper.
Fixes: 112d21fd1a12 ("bcachefs: switch to rhashtable for vfs inodes hash") Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Baokun Li [Fri, 27 Sep 2024 13:33:29 +0000 (21:33 +0800)]
ext4: fix off by one issue in alloc_flex_gd()
Wesley reported an issue:
==================================================================
EXT4-fs (dm-5): resizing filesystem from 7168 to 786432 blocks
------------[ cut here ]------------
kernel BUG at fs/ext4/resize.c:324!
CPU: 9 UID: 0 PID: 3576 Comm: resize2fs Not tainted 6.11.0+ #27
RIP: 0010:ext4_resize_fs+0x1212/0x12d0
Call Trace:
__ext4_ioctl+0x4e0/0x1800
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0x99/0xd0
x64_sys_call+0x1206/0x20d0
do_syscall_64+0x72/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
While reviewing the patch, Honza found that when adjusting resize_bg in
alloc_flex_gd(), it was possible for flex_gd->resize_bg to be bigger than
flexbg_size.
The reproduction of the problem requires the following:
ext4: mark fc as ineligible using an handle in ext4_xattr_set()
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result
in a fast-commit being done before the filesystem is effectively marked as
ineligible. This patch moves the call to this function so that an handle
can be used. If a transaction fails to start, then there's not point in
trying to mark the filesystem as ineligible, and an error will eventually be
returned to user-space.
ext4: use handle to mark fc as ineligible in __track_dentry_update()
Calling ext4_fc_mark_ineligible() with a NULL handle is racy and may result
in a fast-commit being done before the filesystem is effectively marked as
ineligible. This patch fixes the calls to this function in
__track_dentry_update() by adding an extra parameter to the callback used in
ext4_fc_track_template().
Linus Torvalds [Fri, 4 Oct 2024 19:20:09 +0000 (12:20 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"A couple of build/config issues and expanding the speculative SSBS
workaround to more CPUs:
- Expand the speculative SSBS workaround to cover Cortex-A715,
Neoverse-N3 and Microsoft Azure Cobalt 100
- Force position-independent veneers - in some kernel configurations,
the LLD linker generates position-dependent veneers for otherwise
position-independent code, resulting in early boot-time failures
- Fix Kconfig selection of HAVE_DYNAMIC_FTRACE_WITH_ARGS so that it
is not enabled when not supported by the combination of clang and
GNU ld"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Subscribe Microsoft Azure Cobalt 100 to erratum 3194386
arm64: fix selection of HAVE_DYNAMIC_FTRACE_WITH_ARGS
arm64: errata: Expand speculative SSBS workaround once more
arm64: cputype: Add Neoverse-N3 definitions
arm64: Force position-independent veneers
Linus Torvalds [Fri, 4 Oct 2024 19:16:51 +0000 (12:16 -0700)]
Merge tag 'riscv-for-linus-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- PERF_TYPE_BREAKPOINT now returns -EOPNOTSUPP instead of -ENOENT,
which aligns to other ports and is a saner value
- The KASAN-related stack size increasing logic has been moved to a C
header, to avoid dependency issues
* tag 'riscv-for-linus-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix kernel stack size when KASAN is enabled
drivers/perf: riscv: Align errno for unsupported perf event
Linus Torvalds [Fri, 4 Oct 2024 19:11:06 +0000 (12:11 -0700)]
Merge tag 'trace-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix tp_printk command line option crashing the kernel
With the code that can handle a buffer from a previous boot, the
trace_check_vprintf() needed access to the delta of the address space
used by the old buffer and the current buffer. To do so, the
trace_array (tr) parameter was used. But when tp_printk is enabled on
the kernel command line, no trace buffer is used and the trace event
is sent directly to printk(). That meant the tr field of the iterator
descriptor was NULL, and since tp_printk still uses
trace_check_vprintf() it caused a NULL dereference.
- Add ptrace.h include to x86 ftrace file for completeness
- Fix rtla installation when done with out-of-tree build
- Fix the help messages in rtla that were incorrect
- Several fixes to fix races with the timerlat and hwlat code
Several locking issues were discovered with the coordination between
timerlat kthread creation and hotplug. As timerlat has callbacks from
hotplug code to start kthreads when CPUs come online. There are also
locking issues with grabbing the cpu_read_lock() and the locks within
timerlat.
* tag 'trace-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Fix a race during cpuhp processing
tracing/timerlat: Fix a race during cpuhp processing
tracing/timerlat: Drop interface_lock in stop_kthread()
tracing/timerlat: Fix duplicated kthread creation due to CPU online/offline
x86/ftrace: Include <asm/ptrace.h>
rtla: Fix the help text in osnoise and timerlat top tools
tools/rtla: Fix installation from out-of-tree build
tracing: Fix trace_check_vprintf() when tp_printk is used
Linus Torvalds [Fri, 4 Oct 2024 19:05:39 +0000 (12:05 -0700)]
Merge tag 'slab-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
"Fixes for issues introduced in this merge window: kobject memory leak,
unsupressed warning and possible lockup in new slub_kunit tests,
misleading code in kvfree_rcu_queue_batch()"
* tag 'slab-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slub/kunit: skip test_kfree_rcu when the slub kunit test is built-in
mm, slab: suppress warnings in test_leak_destroy kunit test
rcu/kvfree: Refactor kvfree_rcu_queue_batch()
mm, slab: fix use of SLAB_SUPPORTS_SYSFS in kmem_cache_release()
Linus Torvalds [Fri, 4 Oct 2024 18:59:36 +0000 (11:59 -0700)]
Merge tag 'acpi-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix up the ACPI IRQ override quirk list and add two new entries
to it, add a new quirk to the ACPI backlight (video) driver, and fix
the ACPI battery driver.
Specifics:
- Add a quirk for Dell OptiPlex 5480 AIO to the ACPI backlight
(video) driver (Hans de Goede)
- Prevent the ACPI battery driver from crashing when unregistering a
battery hook and simplify battery hook locking in it (Armin Wolf)
- Fix up the ACPI IRQ override quirk list and add quirks for Asus
Vivobook X1704VAP and Asus ExpertBook B2502CVA to it (Hans de
Goede)"
* tag 'acpi-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: battery: Fix possible crash when unregistering a battery hook
ACPI: battery: Simplify battery hook locking
ACPI: video: Add backlight=native quirk for Dell OptiPlex 5480 AIO
ACPI: resource: Add Asus ExpertBook B2502CVA to irq1_level_low_skip_override[]
ACPI: resource: Add Asus Vivobook X1704VAP to irq1_level_low_skip_override[]
ACPI: resource: Loosen the Asus E1404GAB DMI match to also cover the E1404GA
ACPI: resource: Remove duplicate Asus E1504GAB IRQ override
Linus Torvalds [Fri, 4 Oct 2024 18:57:15 +0000 (11:57 -0700)]
Merge tag 'pm-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one in the core and one in the
intel_pstate driver:
- Fix CPU device node reference counting in the cpufreq core (Miquel
Sabaté Solà)
- Turn the spinlock used by the intel_pstate driver in hard IRQ
context into a raw one to prevent the driver from crashing when
PREEMPT_RT is enabled (Uwe Kleine-König)"
* tag 'pm-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Avoid a bad reference count on CPU node
cpufreq: intel_pstate: Make hwp_notify_lock a raw spinlock
Linus Torvalds [Fri, 4 Oct 2024 18:29:46 +0000 (11:29 -0700)]
Merge tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec"
* tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
ALSA: line6: add hw monitor volume control to POD HD500X
ALSA: gus: Fix some error handling paths related to get_bpos() usage
ALSA: hda: Add missing parameter description for snd_hdac_stream_timecounter_init()
ALSA: usb-audio: Add native DSD support for Luxman D-08u
ALSA: core: add isascii() check to card ID generator
MAINTAINERS: ALSA: use linux-sound@vger.kernel.org list
Revert "ALSA: hda: Conditionally use snooping for AMD HDMI"
ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
ALSA: hda: fix trigger_tstamp_latched
ALSA: hda/realtek: Add a quirk for HP Pavilion 15z-ec200
ALSA: hda/generic: Drop obsoleted obey_preferred_dacs flag
ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs
ALSA: silence integer wrapping warning
ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
...
Linus Torvalds [Fri, 4 Oct 2024 18:25:14 +0000 (11:25 -0700)]
Merge tag 'drm-fixes-2024-10-04' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, xe and amdgpu lead the way, with panthor, and few core
components getting various fixes. Nothing seems too out of the
ordinary.
atomic:
- Use correct type when reading damage rectangles
display:
- Fix kernel docs
dp-mst:
- Fix DSC decompression detection
hdmi:
- Fix infoframe size
sched:
- Update maintainers
- Fix race condition whne queueing up jobs
- Fix locking in drm_sched_entity_modify_sched()
- Fix pointer deref if entity queue changes
sysfb:
- Disable sysfb if framebuffer parent device is unknown
i915:
- One fix for bitwise and logical "and" mixup in PM code
xe:
- Restore pci state on resume
- Fix locking on submission, queue and vm
- Fix UAF on queue destruction
- Fix resource release on freq init error path
- Use rw_semaphore to reduce contention on ASID->VM lookup
- Fix steering for media on Xe2_HPM
- Tuning updates to Xe2
- Resume TDR after GT reset to prevent jobs running forever
- Move id allocation to avoid userspace using a guessed number to
trigger UAF
- Fix OA stream close preventing pbatch buffers to complete
- Fix NPD when migrating memory on LNL
- Fix memory leak when aborting binds
panthor:
- Fix locking
- Set FOP_UNSIGNED_OFFSET in fops instance
- Acquire lock in panthor_vm_prepare_map_op_ctx()
- Avoid uninitialized variable in tick_ctx_cleanup()
- Do not block scheduler queue if work is pending
- Do not add write fences to the shared BOs
vbox:
- Fix VLA handling"
* tag 'drm-fixes-2024-10-04' of https://gitlab.freedesktop.org/drm/kernel: (41 commits)
drm/xe: Fix memory leak when aborting binds
drm/xe: Prevent null pointer access in xe_migrate_copy
drm/xe/oa: Don't reset OAC_CONTEXT_ENABLE on OA stream close
drm/xe/queue: move xa_alloc to prevent UAF
drm/xe/vm: move xa_alloc to prevent UAF
drm/xe: Clean up VM / exec queue file lock usage.
drm/xe: Resume TDR after GT reset
drm/xe/xe2: Add performance tuning for L3 cache flushing
drm/xe/xe2: Extend performance tuning to media GT
drm/xe/mcr: Use Xe2_LPM steering tables for Xe2_HPM
drm/xe: Use helper for ASID -> VM in GPU faults and access counters
drm/xe: Convert to USM lock to rwsem
drm/xe: use devm_add_action_or_reset() helper
drm/xe: fix UAF around queue destruction
drm/xe/guc_submit: add missing locking in wedged_fini
drm/xe: Restore pci state upon resume
drm/amd/display: Fix system hang while resume with TBT monitor
drm/amd/display: Enable idle workqueue for more IPS modes
drm/amd/display: Add HDR workaround for specific eDP
drm/amd/display: avoid set dispclk to 0
...
Linus Torvalds [Fri, 4 Oct 2024 17:43:44 +0000 (10:43 -0700)]
Merge tag 'block-6.12-20241004' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix another use-after-free in aoe
- Fixup wrong nested non-saving irq disable/restore in blk-iocost
- Fixup a kerneldoc complaint introduced by a merge window patch
* tag 'block-6.12-20241004' of git://git.kernel.dk/linux:
aoe: fix the potential use-after-free problem in more places
blk_iocost: remove some duplicate irq disable/enables
block: fix blk_rq_map_integrity_sg kernel-doc
Linus Torvalds [Fri, 4 Oct 2024 17:39:36 +0000 (10:39 -0700)]
Merge tag 'io_uring-6.12-20241004' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Fix an error path memory leak, if one part fails to allocate.
Obviously not something that'll generally hit without error
injection.
- Fix an io_req_flags_t cast to make sparse happier.
- Improve the recv multishot termination. Not a bug now, but could be
one in the future. This makes it do the same thing that recvmsg does
in terms of when to terminate a request or not.
* tag 'io_uring-6.12-20241004' of git://git.kernel.dk/linux:
io_uring/net: harden multishot termination case for recv
io_uring: fix casts to io_req_flags_t
io_uring: fix memory leak when cache init fail
Linus Torvalds [Fri, 4 Oct 2024 17:31:59 +0000 (10:31 -0700)]
Merge tag 'fsnotify_for_v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
"Fixes for an inotify deadlock and a data race in fsnotify"
* tag 'fsnotify_for_v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
inotify: Fix possible deadlock in fsnotify_destroy_mark
fsnotify: Avoid data race between fsnotify_recalc_mask() and fsnotify_object_watched()
Linus Torvalds [Fri, 4 Oct 2024 17:24:06 +0000 (10:24 -0700)]
Merge tag 'fs_for_v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF fixes from Jan Kara:
"A couple of UDF error handling fixes for issues spotted by syzbot"
* tag 'fs_for_v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: fix uninit-value use in udf_get_fileshortad
udf: refactor inode_bmap() to handle error
udf: refactor udf_next_aext() to handle error
udf: refactor udf_current_aext() to handle error
Linus Torvalds [Fri, 4 Oct 2024 17:10:23 +0000 (10:10 -0700)]
Merge tag 'ceph-for-6.12-rc2' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix from Patrick for a variety of CephFS lockup scenarios caused by
a regression in cap handling which sneaked in through the netfs helper
library in 5.18 (marked for stable) and an unrelated one-line cleanup"
* tag 'ceph-for-6.12-rc2' of https://github.com/ceph/ceph-client:
ceph: fix cap ref leak via netfs init_request
ceph: use struct_size() helper in __ceph_pool_perm_get()
Linus Torvalds [Fri, 4 Oct 2024 17:05:13 +0000 (10:05 -0700)]
Merge tag 'for-6.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in incremental send, fix invalid clone operation for file that got
its size decreased
- fix __counted_by() annotation of send path cache entries, we do not
store the terminating NUL
- fix a longstanding bug in relocation (and quite hard to hit by
chance), drop back reference cache that can get out of sync after
transaction commit
- wait for fixup worker kthread before finishing umount
- add missing raid-stripe-tree extent for NOCOW files, zoned mode
cannot have NOCOW files but RST is meant to be a standalone feature
- handle transaction start error during relocation, avoid potential
NULL pointer dereference of relocation control structure (reported by
syzbot)
- disable module-wide rate limiting of debug level messages
- minor fix to tracepoint definition (reported by checkpatch.pl)
* tag 'for-6.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: disable rate limiting when debug enabled
btrfs: wait for fixup workers before stopping cleaner kthread during umount
btrfs: fix a NULL pointer dereference when failed to start a new trasacntion
btrfs: send: fix invalid clone operation for file that got its size decreased
btrfs: tracepoints: end assignment with semicolon at btrfs_qgroup_extent event class
btrfs: drop the backref cache during relocation if we commit
btrfs: also add stripe entries for NOCOW writes
btrfs: send: fix buffer overflow detection when copying path to cache entry
Linus Torvalds [Fri, 4 Oct 2024 16:56:05 +0000 (09:56 -0700)]
Merge tag 'v6.12-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- statfs fix (e.g. when limited access to root directory of share)
- special file handling fixes: fix packet validation to avoid buffer
overflow for reparse points, fixes for symlink path parsing (one for
reparse points, and one for SFU use case), and fix for cleanup after
failed SET_REPARSE operation.
- fix for SMB2.1 signing bug introduced by recent patch to NFS symlink
path, and NFS reparse point validation
- comment cleanup
* tag 'v6.12-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not convert delimiter when parsing NFS-style symlinks
cifs: Validate content of NFS reparse point buffer
cifs: Fix buffer overflow when parsing NFS reparse points
smb: client: Correct typos in multiple comments across various files
smb: client: use actual path when queryfs
cifs: Remove intermediate object of failed create reparse call
Revert "smb: client: make SHA-512 TFM ephemeral"
smb: Update comments about some reparse point tags
cifs: Check for UTF-16 null codepoint in SFU symlink target location
projects / thirdparty / kernel / linux.git / log
