Anthony Liguori [Fri, 5 Oct 2012 00:52:09 +0000 (19:52 -0500)]
Merge remote-tracking branch 'qmp/queue/qmp' into staging
* qmp/queue/qmp:
block: live snapshot documentation tweaks
input: index_from_key(): drop unused code
qmp: qmp_send_key(): accept key codes in hex
input: qmp_send_key(): simplify
hmp: dump-guest-memory: hardcode protocol argument to "file:"
qmp: dump-guest-memory: don't spin if non-blocking fd would block
qmp: dump-guest-memory: improve schema doc (again)
qapi: convert add_client
monitor: add Error * argument to monitor_get_fd
pci-assign: use monitor_handle_fd_param
qapi: add "unix" to the set of reserved words
qapi: do not protect enum values from namespace pollution
Add qemu-ga-client script
Support settimeout in QEMUMonitorProtocol
Make negotiation optional in QEMUMonitorProtocol
Anthony Liguori [Fri, 5 Oct 2012 00:50:33 +0000 (19:50 -0500)]
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
* mst/tags/for_anthony:
virtio-serial-bus: let chardev know the exact number of bytes requested
virtio: Introduce virtqueue_get_avail_bytes()
virtio: use unsigned int for counting bytes in vq
iov: add const annotation
virtio-net: fix used len for tx
virtio: don't mark unaccessed memory as dirty
Anthony Liguori [Fri, 5 Oct 2012 00:49:15 +0000 (19:49 -0500)]
Merge remote-tracking branch 'kraxel/usb.66' into staging
* kraxel/usb.66:
usb: Fix usb_packet_map() in the presence of IOMMUs
usb-redir: Adjust pkg-config check for usbredirparser .pc file rename (v2)
ehci: Fix interrupt packet MULT handling
xhci: create a memory region for each port
xhci: route string & usb hub support
xhci: tweak limits
compat: turn off msi/msix on xhci for old machine types
add pc-1.3 machine type
Conflicts:
hw/pc_piix.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Thu, 4 Oct 2012 10:36:04 +0000 (12:36 +0200)]
Make target_phys_addr_t 64 bits unconditionally
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations. Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Fri, 28 Sep 2012 15:17:03 +0000 (16:17 +0100)]
fpu/softfloat.c: Return correctly signed values from uint64_to_float32
The uint64_to_float32() conversion function was incorrectly always
returning numbers with the sign bit set (ie negative numbers). Correct
this so we return positive numbers instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 24 Sep 2012 16:28:35 +0000 (17:28 +0100)]
fpu/softfloat.c: Remove pointless shift of always-zero value
In float16_to_float32, when returning an infinity, just pass zero
as the mantissa argument to packFloat32(), rather than shifting
a value which we know must be zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Anthony Liguori [Mon, 1 Oct 2012 18:40:15 +0000 (13:40 -0500)]
vfio_pci: fix build on 32-bit systems
We cannot cast directly from pointer to uint64.
Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Alex Barcelo <abarcelo@ac.upc.edu> Reported-by: Alex Barcelo <abarcelo@ac.upc.edu> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alex Williamson [Wed, 26 Sep 2012 17:19:39 +0000 (11:19 -0600)]
vfio: Enable vfio-pci and mark supported
Enabled for all softmmu guests supporting PCI on Linux hosts. Note
that currently only x86 hosts have the kernel side VFIO IOMMU support
for this. PPC (g3beige) is the only non-x86 guest known to work.
ARM (veratile) hangs in firmware, others untested.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alex Williamson [Wed, 26 Sep 2012 17:19:32 +0000 (11:19 -0600)]
vfio: vfio-pci device assignment driver
This adds the core of the QEMU VFIO-based PCI device assignment driver.
To make use of this driver, enable CONFIG_VFIO, CONFIG_VFIO_IOMMU_TYPE1,
and CONFIG_VFIO_PCI in your host Linux kernel config. Load the vfio-pci
module. To assign device 0000:05:00.0 to a guest, do the following:
for dev in $(ls /sys/bus/pci/devices/0000:05:00.0/iommu_group/devices); do
vendor=$(cat /sys/bus/pci/devices/$dev/vendor)
device=$(cat /sys/bus/pci/devices/$dev/device)
if [ -e /sys/bus/pci/devices/$dev/driver ]; then
echo $dev > /sys/bus/pci/devices/$dev/driver/unbind
fi
echo $vendor $device > /sys/bus/pci/drivers/vfio-pci/new_id
done
See Documentation/vfio.txt in the Linux kernel tree for further
description of IOMMU groups and VFIO.
Then launch qemu including the option:
-device vfio-pci,host=0000:05:00.0
Legacy PCI interrupts (INTx) currently makes use of a kludge where we
trap BAR accesses and assume the access is in response to an interrupt,
therefore de-asserting and unmasking the interrupt. It's not quite as
targetted as using the EOI for this, but it's self contained and seems
to work across all architectures. The side-effect is a significant
performance slow-down for device in INTx mode. Some devices, like
graphics cards, don't really use their interrupt, so this can be turned
off with the x-intx=off option, which disables INTx alltogether. This
should be considered an experimental option until we refine this code.
Both MSI and MSI-X are supported and avoid these issues.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alex Williamson [Wed, 26 Sep 2012 17:19:18 +0000 (11:19 -0600)]
Update kernel header script to include vfio
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
H. Peter Anvin [Wed, 26 Sep 2012 20:18:43 +0000 (13:18 -0700)]
x86: Implement SMEP and SMAP
This patch implements Supervisor Mode Execution Prevention (SMEP) and
Supervisor Mode Access Prevention (SMAP) for x86. The purpose of the
patch, obviously, is to help kernel developers debug the support for
those features.
A fair bit of the code relates to the handling of CPUID features. The
CPUID code probably would get greatly simplified if all the feature
bit words were unified into a single vector object, but in the
interest of producing a minimal patch for SMEP/SMAP, and because I had
very limited time for this project, I followed the existing style.
[ v2: don't change the definition of the qemu64 CPU shorthand, since
that breaks loading old snapshots. Per Anthony Liguori this can be
fixed once the CPU feature set is snapshot.
Change the coding style slightly to conform to checkpatch.pl. ]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
i386: -cpu help: remove reference to specific CPUID leaves/registers
The -cpu configuration interface is based on a list of feature names or
properties, on a single namespace, so there's no need to mention on
which CPUID leaf/register each flag is located.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Don Slutz <Don@CloudSwitch.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instead of having duplicate feature names on the ext2_feature array for
the AMD feature bit aliases, we keep the feature names only on the
feature_name[] array, and copy the corresponding bits to
cpuid_ext2_features in case the CPU vendor is AMD.
This will:
- Make sure we don't set the feature bit aliases on Intel CPUs;
- Make it easier to convert feature bits to CPU properties, as now we
have a single bit on the x86_def_t struct for each CPU feature.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Don Slutz <Don@CloudSwitch.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
i386: kvm: use a #define for the set of alias feature bits
Instea of using a hardcoded hex constant, define CPUID_EXT2_AMD_ALIASES
as the set of CPUID[8000_0001].EDX bits that on AMD are the same as the
bits of CPUID[1].EDX.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-By: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Don Slutz <Don@CloudSwitch.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Amit Shah [Mon, 24 Sep 2012 18:35:16 +0000 (00:05 +0530)]
virtio-serial-bus: let chardev know the exact number of bytes requested
Using the virtqueue_avail_bytes() function had an unnecessarily
crippling effect on the number of bytes needed by the guest as reported
to the chardev layer in the can_read() callback.
Using the new virtqueue_get_avail_bytes() function will let us advertise
the exact number of bytes we can send to the guest.
Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Amit Shah [Mon, 24 Sep 2012 18:35:15 +0000 (00:05 +0530)]
virtio: Introduce virtqueue_get_avail_bytes()
The current virtqueue_avail_bytes() is oddly named, and checks if a
particular number of bytes are available in a vq. A better API is to
fetch the number of bytes available in the vq, and let the caller do
what's interesting with the numbers.
Introduce virtqueue_get_avail_bytes(), which returns the number of bytes
for buffers marked for both, in as well as out. virtqueue_avail_bytes()
is made a wrapper over this new function.
Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
offset of accessed buffer is calculated using iov_length, so it
can exceed accessed len. If that happens
math in len - offset wraps around, and size becomes wrong.
As real value is 0, so this is harmless but unnecessary.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Merge branch 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
Versatile Express: Add modelling of NOR flash
Versatile Express: Fix NOR flash 0 address and remove flash alias
hw/armv7m_nvic: Correctly register GIC region when setting up NVIC
pl190: fix read of VECTADDR
The blank lines inside the single dump make it difficult for the
eye to pick out the block. Worse, with interior newlines, but
no blank line following, the PSW line appears to belong to the
next dump block.
Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The current code duplicates the QKeyCodeList keys in order to store
the key values for release_keys() late run. This is a bit complicated
though, as we have to care about correct ordering and then release_keys()
will have to index key_defs[] over again.
Switch to an array of integers, which is dynamically allocated and stores
the already converted key value.
This simplifies the current code and the next commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
qmp: dump-guest-memory: don't spin if non-blocking fd would block
fd_write_vmcore() will indefinitely spin for a non-blocking
file-descriptor that would block. However, if the fd is non-blocking,
how does it make sense to spin?
Change this behavior to return an error instead.
Note that this can only happen with an fd provided by a management
application. The fd opened internally by dump-guest-memory is blocking.
While there, also fix 'writen_size' variable name.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Francesco Lavra [Wed, 19 Sep 2012 05:57:21 +0000 (05:57 +0000)]
Versatile Express: Add modelling of NOR flash
This patch adds modelling of the two NOR flash banks found on the
Versatile Express motherboard. Tested with U-Boot running on an emulated
Versatile Express, with either A9 or A15 CoreTile.
Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Francesco Lavra [Wed, 19 Sep 2012 05:51:58 +0000 (05:51 +0000)]
Versatile Express: Fix NOR flash 0 address and remove flash alias
In the A series memory map (implemented in the Cortex A15 CoreTile), the
first NOR flash bank (flash 0) is mapped to address 0x08000000, while
address 0x00000000 can be configured as alias to either the first or the
second flash bank. This patch fixes the definition of flash 0 address,
and for simplicity removes the alias definition.
Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/armv7m_nvic: Correctly register GIC region when setting up NVIC
When setting up the NVIC memory regions the memory range
0x100..0xcff is aliased to an IO memory region that belongs
to the ARM GIC. This aliased region should be added to the
NVIC memory container, but the actual GIC IO memory region
was being added instead. This mixup was causing the wrong
IO memory access functions to be called when accessing parts
of the NVIC memory.
Signed-off-by: Meador Inge <meadori@codesourcery.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reading VECTADDR was causing us to set the current priority to
the wrong value, the most obvious effect of which was that we
would return the vector for the wrong interrupt as the result
of the read.
Signed-off-by: Brendan Fennell <bfennell@skynet.ie> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
1. The fd returned by monitor_get_fd() leaks in most error conditions
2. monitor_get_fd() return value is not checked. Best case we get
an error that is not correctly reported, worse case one of the
functions using the fd (with value of -1) will explode
3. A few error conditions aren't reported
4. We now "use up" @fdname always. Before, it was left alone for
invalid @protocol
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Paolo Bonzini [Thu, 20 Sep 2012 14:50:32 +0000 (16:50 +0200)]
pci-assign: use monitor_handle_fd_param
There is no need to open-code the choice between a file descriptor
number or a named one. Just use monitor_handle_fd_param, which
also takes care of printing the error message.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
This is an easy-to-use QEMU guest agent client written in
Python. It simply provides commands to call guest agent
functions like ping, fsfreeze and shutdown. Additionally,
it provides extra useful commands, e.g, cat, ifconfig and
reboot, by using guet agent functions.
The script communicates with a guest agent by means of
qmp.QEMUMonitorProtocol. Every commands are called with
timeout (3 sec.) to avoid blocking. The script always
calls sync command prior to issuing an actual command
(except for ping which doesn't need sync).
This is a preparation for qemu-ga-client which uses
QEMUMonitorProtocol class. The class tries to
negotiate capabilities on connect, however, qemu-ga
doesn't suppose it and fails.
This change makes the negotiation optional, though
it's still performed by default for compatibility.
David Gibson [Wed, 26 Sep 2012 02:59:31 +0000 (12:59 +1000)]
usb: Fix usb_packet_map() in the presence of IOMMUs
With the IOMMU infrastructure introduced before 1.2, we need to use
dma_memory_map() to obtain a qemu pointer to memory from an IO bus address.
However, dma_memory_map() alters the given length to reflect the length
over which the used DMA translation is valid - which could be either more
or less than the requested length.
usb_packet_map() does not correctly handle these cases, simply failing if
dma_memory_map() alters the requested length. If dma_memory_map()
increased the length, we just need to use the requested length for the
qemu_iovec_add(). However, if it decreased the length, it means that a
single DMA translation is not valid for the whole sglist element, and so
we need to loop, splitting it up into multiple iovec entries for each
piece with a DMA translation (in practice >2 pieces is unlikely).
This patch implements the correct behaviour
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Tue, 25 Sep 2012 11:22:21 +0000 (13:22 +0200)]
usb-redir: Adjust pkg-config check for usbredirparser .pc file rename (v2)
The usbredir 0.5 release introduced the new API for 64 bit packet ids, but
it kept the libusbredirparser.pc name as is, meaning that older versions of
qemu will still have their pkg-config check for usbredirparser fulfilled,
and build with the usb-redir device. Due to the API change there will be
some compiler warnings, but the build will succeed, however the usb-redir
device will be broken on 32 bit machines.
To solve this a new usbredir-0.5.2 release is coming, which renames the
libusbredirparser.pc file to libusbredirparser-0.5.pc, so that it will no
longer fulfill the pkg-config check of the qemu-1.2 and older releases,
stopping the (silent) breakage. This patch adjusts qemu master's configure
to properly detect the new usbredir release.
Changes in v2:
-Not only use the new .pc name in the check but also when getting cflags
and libs!
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Thu, 20 Sep 2012 15:38:07 +0000 (17:38 +0200)]
ehci: Fix interrupt packet MULT handling
There are several issues with our handling of the MULT epcap field
of interrupt qhs, which this patch fixes.
1) When we don't execute a transaction because of the transaction counter
being 0, p->async stays EHCI_ASYNC_NONE, and the next time we process the
same qtd we hit an assert in ehci_state_fetchqtd because of this. Even though
I believe that this is caused by 3 below, this patch still removes the assert,
as that can still happen without 3, when multiple packets are queued for the
same interrupt ep.
2) We only *check* the transaction counter from ehci_state_execute, any
packets queued up by fill_queue bypass this check. This is fixed by not calling
fill_queue for interrupt packets.
3) Some versions of Windows set the MULT field of the qh to 0, which is a
clear violation of the EHCI spec, but still they do it. This means that we
will never execute a qtd for these, making interrupt ep-s on USB-2 devices
not work, and after recent changes, triggering 1).
So far we've stored the transaction counter in our copy of the mult field,
but with this beginnig at 0 already when dealing with these version of windows
this won't work. So this patch adds a transact_ctr field to our qh struct,
and sets this to the MULT field value on fetchqh. When the MULT field value
is 0, we set it to 4. Assuming that windows gets way with setting it to 0,
by the actual hardware going horizontal on a 1 -> 0 transition, which will
give it 4 transactions (MULT goes from 0 - 3).
Note that we cannot stop on detecting the 1 -> 0 transition, as our decrement
of the transaction counter, and checking for it are done in 2 different places.
Reported-by: Shawn Starr <shawn.starr@rogers.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Set maxports to 15. This is what the usb3 route string can handle.
Set maxslots to 64. This is more than the number of root ports we
can have, but with additional hubs you can end up with more devices.
Set maxintrs (aka msi vectors) to 16. Should be enougth, especially
considering that vectors are a limited ressource. Linux guests use
only three at the moment.
Amos Kong [Fri, 7 Sep 2012 03:11:03 +0000 (11:11 +0800)]
add a boot parameter to set reboot timeout
Added an option to let qemu transfer a configuration file to bios,
"etc/boot-fail-wait", which could be specified by command
-boot reboot-timeout=T
T have a max value of 0xffff, unit is ms.
With this option, guest will wait for a given time if not find
bootabled device, then reboot. If reboot-timeout is '-1', guest
will not reboot, qemu passes '-1' to bios by default.
This feature need the new seabios's support.
Seabios pulls the value from the fwcfg "file" interface, this
interface is used because SeaBIOS needs a reliable way of
obtaining a name, value size, and value. It in no way requires
that there be a real file on the user's host machine.
Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
getaddrinfo can give us a list of addresses, but we only try to
connect to the first one. If that fails we never proceed to
the next one. This is common on desktop setups that often have ipv6
configured but not actually working.
To fix this make inet_connect_nonblocking retry connection with a different
address.
callers on inet_nonblocking_connect register a callback function that will
be called when connect opertion completes, in case of failure the fd will have
a negative value
Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Fri, 14 Sep 2012 17:02:30 +0000 (19:02 +0200)]
configure: Allow builds without any system or user emulation
The old code aborted configure when no emulation target was selected.
Even after removing the 'exit 1', it tried to read from STDIN
when QEMU was configured with
configure' '--disable-user' '--disable-system'
This is fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a "use64" property which will make the ivshmem driver
register a 64bit memory bar when set, so you have something to play with
when testing 64bit pci bits. It also allows to have quite big shared
memory regions, like this:
[root@fedora ~]# lspci -vs1:1
01:01.0 RAM memory: Red Hat, Inc Device 1110
Subsystem: Red Hat, Inc Device 1100
Physical Slot: 1-1
Flags: fast devsel
Memory at fd400000 (32-bit, non-prefetchable) [disabled] [size=256]
Memory at 8040000000 (64-bit, prefetchable) [size=1G]
[ v5: rebase, update compat property for post-1.2 merge ]
[ v4: rebase & adapt to latest master again ]
[ v3: rebase & adapt to latest master ]
[ v2: default to on as suggested by avi,
turn off for pc-$old using compat property ]
Igor Mammedov [Wed, 5 Sep 2012 21:06:23 +0000 (23:06 +0200)]
target-arm: use notifier for signaling guest system_powerdown command
Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Igor Mammedov [Wed, 5 Sep 2012 21:06:21 +0000 (23:06 +0200)]
Introduce powerdown_notifiers
Notifier will be used for signaling powerdown request to guest in
a more general way and intended to replace very specific
qemu_irq_rise(qemu_system_powerdown) and will allow to remove global
variable qemu_system_powerdown.
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
tcg: Streamline movcond_i64 using 32-bit arithmetic
Avoiding 64-bit arithmetic (outside of the compare) reduces the
generated op count from 15 to 12, and the generated code size on
i686 from 105 to 88 bytes.
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Checking that we don't try for idx != [01] is trivial. Checking
that we don't issue more than one of any index requires a tad
more data and some ifdefs protecting that new variable.
Signed-off-by: Richard Henderson <rth@twiddle.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For tcg_gen_concat_i32_i64 we only use deposit if the host supports it.
For tcg_gen_concat32_i64 even if the host does not, as we get identical
code before and after.
Note that this relies on the ANDI -> EXTU patch for the identity claim.
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Anthony Liguori [Tue, 25 Sep 2012 21:06:16 +0000 (16:06 -0500)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony:
block: remove keep_read_only flag from BlockDriverState struct
block: convert bdrv_commit() to use bdrv_reopen()
block: vpc image file reopen
block: vdi image file reopen
block: vmdk image file reopen
block: qcow image file reopen
block: qcow2 image file reopen
block: qed image file reopen
block: raw image file reopen
block: raw-posix image file reopen
block: purge s->aligned_buf and s->aligned_buf_size from raw-posix.c
block: use BDRV_O_NOCACHE instead of s->aligned_buf in raw-posix.c
block: do not parse BDRV_O_CACHE_WB in block drivers
block: move open flag parsing in raw block drivers to helper functions
block: move aio initialization into a helper function
block: Framework for reopening files safely
block: make bdrv_set_enable_write_cache() modify open_flags
block: correctly set the keep_read_only flag
blockdev: preserve readonly and snapshot states across media changes
Anthony Liguori [Tue, 25 Sep 2012 21:06:16 +0000 (16:06 -0500)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
* stefanha/trivial-patches:
w32: Always use standard instead of native format strings
net/socket: Fix compiler warning (regression for MinGW)
linux-user: Remove redundant null check and replace free by g_free
qemu-timer: simplify qemu_run_timers
TextConsole: saturate escape parameter in TTY_STATE_CSI
curses: don't initialize curses when qemu is daemonized
dtrace backend: add function to reserved words
pflash_cfi01: Fix warning caused by unreachable code
ioh3420: Remove unreachable code
lm4549: Fix buffer overflow
cadence_uart: Fix buffer overflow
qemu-sockets: Fix potential memory leak
qemu-ga: Remove unreachable code after g_error
target-i386: Allow tsc-frequency to be larger then 2.147G
Anthony Liguori [Tue, 25 Sep 2012 21:06:16 +0000 (16:06 -0500)]
Merge remote-tracking branch 'bonzini/scsi-next' into staging
* bonzini/scsi-next:
SCSI: Standard INQUIRY data should report HiSup flag as set.
scsi-disk: use scsi_data_cdb_length
scsi: introduce scsi_cdb_length and scsi_data_cdb_length
scsi-disk: fix check for out-of-range LBA
scsi-disk: introduce check_lba_range
iSCSI: We dont need to explicitely call qemu_notify_event() any more
iSCSI: We need to support SG_IO also from iscsi_ioctl()
Anthony Liguori [Tue, 25 Sep 2012 21:06:15 +0000 (16:06 -0500)]
Merge remote-tracking branch 'bonzini/nbd-next' into staging
* bonzini/nbd-next:
nbd: add nbd_export_get_blockdev
nbd: negotiate with named exports
nbd: register named exports
qemu-nbd: rewrite termination conditions to use a state machine
nbd: add notification for closing an NBDExport
nbd: track clients into NBDExport
nbd: add reference counting to NBDExport
nbd: do not leak nbd_trip coroutines when a connection is torn down
nbd: make refcount interface public
nbd: do not close BlockDriverState in nbd_export_close
nbd: pass NBDClient to nbd_send_negotiate
nbd: add more constants
Jeff Cody [Thu, 20 Sep 2012 19:13:30 +0000 (15:13 -0400)]
block: vmdk image file reopen
This patch supports reopen for VMDK image files. VMDK extents are added
to the existing reopen queue, so that the transactional model of reopen
is maintained with multiple image files.
Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
projects / thirdparty / qemu.git / log
