Junio C Hamano [Wed, 1 Jan 2025 17:21:14 +0000 (09:21 -0800)]
Merge branch 'ps/weak-sha1-for-tail-sum-fix'
An earlier "csum-file checksum does not have to be computed with
sha1dc" topic had a few code paths that had initialized an
implementation of a hash function to be used by an unmatching hash
by mistake, which have been corrected.
In the preceding commit we have fixed a segfault when using an unsafe
SHA1 backend that is different from the safe one. This segfault only
went by unnoticed because we never set up an unsafe backend in our CI
systems. Fix this ommission by setting `OPENSSL_SHA1_UNSAFE` in our
TEST-vars job.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/fast-import: fix segfault with unsafe SHA1 backend
Same as with the preceding commit, git-fast-import(1) is using the safe
variant to initialize a hashfile checkpoint. This leads to a segfault
when passing the checkpoint into the hashfile subsystem because it would
use the unsafe variants instead:
++ git --git-dir=R/.git fast-import --big-file-threshold=1
AddressSanitizer:DEADLYSIGNAL
=================================================================
==577126==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000040 (pc 0x7ffff7a01a99 bp 0x5070000009c0 sp 0x7fffffff5b30 T0)
==577126==The signal is caused by a READ memory access.
==577126==Hint: address points to the zero page.
#0 0x7ffff7a01a99 in EVP_MD_CTX_copy_ex (/nix/store/h1ydpxkw9qhjdxjpic1pdc2nirggyy6f-openssl-3.3.2/lib/libcrypto.so.3+0x201a99) (BuildId: 41746a580d39075fc85e8c8065b6c07fb34e97d4)
#1 0x555555ddde56 in openssl_SHA1_Clone ../sha1/openssl.h:40:2
#2 0x555555dce2fc in git_hash_sha1_clone_unsafe ../object-file.c:123:2
#3 0x555555c2d5f8 in hashfile_checkpoint ../csum-file.c:211:2
#4 0x5555559647d1 in stream_blob ../builtin/fast-import.c:1110:2
#5 0x55555596247b in parse_and_store_blob ../builtin/fast-import.c:2031:3
#6 0x555555967f91 in file_change_m ../builtin/fast-import.c:2408:5
#7 0x55555595d8a2 in parse_new_commit ../builtin/fast-import.c:2768:4
#8 0x55555595bb7a in cmd_fast_import ../builtin/fast-import.c:3614:4
#9 0x555555b1f493 in run_builtin ../git.c:480:11
#10 0x555555b1bfef in handle_builtin ../git.c:740:9
#11 0x555555b1e6f4 in run_argv ../git.c:807:4
#12 0x555555b1b87a in cmd_main ../git.c:947:19
#13 0x5555561649e6 in main ../common-main.c:64:11
#14 0x7ffff742a1fb in __libc_start_call_main (/nix/store/65h17wjrrlsj2rj540igylrx7fqcd6vq-glibc-2.40-36/lib/libc.so.6+0x2a1fb) (BuildId: bf320110569c8ec2425e9a0c5e4eb7e97f1fb6e4)
#15 0x7ffff742a2b8 in __libc_start_main@GLIBC_2.2.5 (/nix/store/65h17wjrrlsj2rj540igylrx7fqcd6vq-glibc-2.40-36/lib/libc.so.6+0x2a2b8) (BuildId: bf320110569c8ec2425e9a0c5e4eb7e97f1fb6e4)
#16 0x555555772c84 in _start (git+0x21ec84)
==577126==Register values:
rax = 0x0000511000000cc0 rbx = 0x0000000000000000 rcx = 0x000000000000000c rdx = 0x0000000000000000
rdi = 0x0000000000000000 rsi = 0x00005070000009c0 rbp = 0x00005070000009c0 rsp = 0x00007fffffff5b30
r8 = 0x0000000000000000 r9 = 0x0000000000000000 r10 = 0x0000000000000000 r11 = 0x00007ffff7a01a30
r12 = 0x0000000000000000 r13 = 0x00007fffffff6b60 r14 = 0x00007ffff7ffd000 r15 = 0x00005555563b9910
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV (/nix/store/h1ydpxkw9qhjdxjpic1pdc2nirggyy6f-openssl-3.3.2/lib/libcrypto.so.3+0x201a99) (BuildId: 41746a580d39075fc85e8c8065b6c07fb34e97d4) in EVP_MD_CTX_copy_ex
==577126==ABORTING
./test-lib.sh: line 1039: 577126 Aborted git --git-dir=R/.git fast-import --big-file-threshold=1 < input
error: last command exited with $?=134
not ok 167 - R: blob bigger than threshold
The segfault is only exposed in case the unsafe and safe backends are
different from one another.
Fix the issue by initializing the context with the unsafe SHA1 variant.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bulk-checkin: fix segfault with unsafe SHA1 backend
In 1b9e9be8b4 (csum-file.c: use unsafe SHA-1 implementation when
available, 2024-09-26) we have converted our `struct hashfile` to use
the unsafe SHA1 backend, which results in a significant speedup. One
needs to be careful with how to use that structure now though because
callers need to consistently use either the safe or unsafe variants of
SHA1, as otherwise one can easily trigger corruption.
As it turns out, we have one inconsistent usage in our tree because we
directly initialize `struct hashfile_checkpoint::ctx` with the safe
variant of SHA1, but end up writing to that context with the unsafe
ones. This went unnoticed so far because our CI systems do not exercise
different hash functions for these two backends, and consequently safe
and unsafe variants are equivalent. But when using SHA1DC as safe and
OpenSSL as unsafe backend this leads to a crash an t1050:
++ git -c core.compression=0 add large1
AddressSanitizer:DEADLYSIGNAL
=================================================================
==1367==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000040 (pc 0x7ffff7a01a99 bp 0x507000000db0 sp 0x7fffffff5690 T0)
==1367==The signal is caused by a READ memory access.
==1367==Hint: address points to the zero page.
#0 0x7ffff7a01a99 in EVP_MD_CTX_copy_ex (/nix/store/h1ydpxkw9qhjdxjpic1pdc2nirggyy6f-openssl-3.3.2/lib/libcrypto.so.3+0x201a99) (BuildId: 41746a580d39075fc85e8c8065b6c07fb34e97d4)
#1 0x555555ddde56 in openssl_SHA1_Clone ../sha1/openssl.h:40:2
#2 0x555555dce2fc in git_hash_sha1_clone_unsafe ../object-file.c:123:2
#3 0x555555c2d5f8 in hashfile_checkpoint ../csum-file.c:211:2
#4 0x555555b9905d in deflate_blob_to_pack ../bulk-checkin.c:286:4
#5 0x555555b98ae9 in index_blob_bulk_checkin ../bulk-checkin.c:362:15
#6 0x555555ddab62 in index_blob_stream ../object-file.c:2756:9
#7 0x555555dda420 in index_fd ../object-file.c:2778:9
#8 0x555555ddad76 in index_path ../object-file.c:2796:7
#9 0x555555e947f3 in add_to_index ../read-cache.c:771:7
#10 0x555555e954a4 in add_file_to_index ../read-cache.c:804:9
#11 0x5555558b5c39 in add_files ../builtin/add.c:355:7
#12 0x5555558b412e in cmd_add ../builtin/add.c:578:18
#13 0x555555b1f493 in run_builtin ../git.c:480:11
#14 0x555555b1bfef in handle_builtin ../git.c:740:9
#15 0x555555b1e6f4 in run_argv ../git.c:807:4
#16 0x555555b1b87a in cmd_main ../git.c:947:19
#17 0x5555561649e6 in main ../common-main.c:64:11
#18 0x7ffff742a1fb in __libc_start_call_main (/nix/store/65h17wjrrlsj2rj540igylrx7fqcd6vq-glibc-2.40-36/lib/libc.so.6+0x2a1fb) (BuildId: bf320110569c8ec2425e9a0c5e4eb7e97f1fb6e4)
#19 0x7ffff742a2b8 in __libc_start_main@GLIBC_2.2.5 (/nix/store/65h17wjrrlsj2rj540igylrx7fqcd6vq-glibc-2.40-36/lib/libc.so.6+0x2a2b8) (BuildId: bf320110569c8ec2425e9a0c5e4eb7e97f1fb6e4)
#20 0x555555772c84 in _start (git+0x21ec84)
==1367==Register values:
rax = 0x0000511000001080 rbx = 0x0000000000000000 rcx = 0x000000000000000c rdx = 0x0000000000000000
rdi = 0x0000000000000000 rsi = 0x0000507000000db0 rbp = 0x0000507000000db0 rsp = 0x00007fffffff5690
r8 = 0x0000000000000000 r9 = 0x0000000000000000 r10 = 0x0000000000000000 r11 = 0x00007ffff7a01a30
r12 = 0x0000000000000000 r13 = 0x00007fffffff6b38 r14 = 0x00007ffff7ffd000 r15 = 0x00005555563b9910
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV (/nix/store/h1ydpxkw9qhjdxjpic1pdc2nirggyy6f-openssl-3.3.2/lib/libcrypto.so.3+0x201a99) (BuildId: 41746a580d39075fc85e8c8065b6c07fb34e97d4) in EVP_MD_CTX_copy_ex
==1367==ABORTING
./test-lib.sh: line 1023: 1367 Aborted git $config add large1
error: last command exited with $?=134
not ok 4 - add with -c core.compression=0
Fix the issue by using the unsafe variant instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 28 Dec 2024 09:48:50 +0000 (10:48 +0100)]
reftable: handle realloc error in parse_names()
Check the final reallocation for adding the terminating NULL and handle
it just like those in the loop. Simply use REFTABLE_ALLOC_GROW instead
of keeping the REFTABLE_REALLOC_ARRAY call and adding code to preserve
the original pointer value around it.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 28 Dec 2024 09:48:00 +0000 (10:48 +0100)]
reftable: fix allocation count on realloc error
When realloc(3) fails, it returns NULL and keeps the original allocation
intact. REFTABLE_ALLOC_GROW overwrites both the original pointer and
the allocation count variable in that case, simultaneously leaking the
original allocation and misrepresenting the number of storable items.
parse_names() avoids the leak by keeping the original pointer if
reallocation fails, but still increase the allocation count in such a
case as if it succeeded. That's OK, because the error handling code
just frees everything and doesn't look at names_cap anymore.
reftable_buf_add() does the same, but here it is a problem as it leaves
the reftable_buf in a broken state, with ->alloc being roughly twice as
big as the actually allocated memory, allowing out-of-bounds writes in
subsequent calls.
Reimplement REFTABLE_ALLOC_GROW to avoid leaks, keep allocation counts
in sync and still signal failures to callers while avoiding code
duplication in callers. Make it an expression that evaluates to 0 if no
reallocation is needed or it succeeded and 1 on failure while keeping
the original pointer and allocation counter values.
Adjust REFTABLE_ALLOC_GROW_OR_NULL to the new calling convention for
REFTABLE_ALLOC_GROW, but keep its support for non-size_t alloc variables
for now.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 28 Dec 2024 09:47:05 +0000 (10:47 +0100)]
reftable: avoid leaks on realloc error
When realloc(3) fails, it returns NULL and keeps the original allocation
intact. REFTABLE_ALLOC_GROW overwrites both the original pointer and
the allocation count variable in that case, simultaneously leaking the
original allocation and misrepresenting the number of storable items.
parse_names() and reftable_buf_add() avoid leaking by restoring the
original pointer value on failure, but all other callers seem to be OK
with losing the old allocation. Add a new variant of the macro,
REFTABLE_ALLOC_GROW_OR_NULL, which plugs the leak and zeros the
allocation counter. Use it for those callers.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7d549fe317 (meson: skip gitweb build when Perl is disabled,
2024-12-20) we have started to conditionally enable "gitweb" based on
whether or not Perl is enabled. By accident though that change causes us
to not build gitweb in case its feature flag is set to "auto" even if
autoconfiguration determines that it could be built. This is because we
use "gitweb_option.enabled()", which only checks whether the feature has
been explicitly enabled.
Fix the issue by using `gitweb_option.allowed()` instead, which returns
true in case it is either explicitly enabled or set to "auto". This also
works for the case where the feature becomes auto-disabled due to Perl
not being present because we use `disable_auto_if(not perl.found())`.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Building our "gitweb" interface is optional in our Makefile and in Meson
and not wired up at all with CMake, but disabling it causes a couple of
tests in the t950* range that pull in "t/lib-gitweb.sh". This is because
the test library knows to execute gitweb-tests based on whether or not
Perl is available, but we may have Perl available and still end up not
building gitweb e.g. with `make test NO_GITWEB=YesPlease`.
Fix this issue by wiring up a new "NO_GITWEB" build option so that we
can skip these tests in case gitweb is not built.
Note that this new build option requires us to move the configuration of
GIT-BUILD-OPTIONS to a later point in our Meson build instructions. But
as that file is only consumed by our tests at runtime this change does
not cause any issues.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The variables declared and substituted in GIT-BUILD-OPTIONS are not
ordered in any obvious way. Sort them alphabetically so that it becomes
obvious where new variables should go.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Meet Soni [Fri, 27 Dec 2024 10:53:45 +0000 (16:23 +0530)]
t7611: replace test -f with test_path_is* helpers
Replace `test -f` and `test ! -f` with `test_path_is_file` and
`test_path_is_missing` for better debuggability.
While `test -f` ensures that the file exists and is a regular file,
`test_path_is_file` provides clearer error messages on failure.
On the other hand, `test ! -f` checks either the absence of a regular
file or the presence of any other filesystem object, but looking at
them in the test individually, all of them should've said `test ! -e`,
i.e. "there shouldn't be anything at given path on filesystem."
Replace these cases with `test_path_is_missing` for better
debuggability.
Helped-by: karthik nayak <karthik.188@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Meet Soni <meetsoni3017@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 23 Dec 2024 16:45:57 +0000 (08:45 -0800)]
Hopefully the final batch before 2.48-rc1
Let's wait for git-gui, gitk, and possibly po/ and delay the tagging
of the -rc1. Many people are already offline for the end-of-year
holidays and it is a slow week, and 'master' front has too many new
things graduated from 'next' a bit too early for me to feel
comfortable.
Junio C Hamano [Mon, 23 Dec 2024 17:32:29 +0000 (09:32 -0800)]
Merge branch 'kn/reflog-migration'
"git refs migrate" learned to also migrate the reflog data across
backends.
* kn/reflog-migration:
refs: mark invalid refname message for translation
refs: add support for migrating reflogs
refs: allow multiple reflog entries for the same refname
refs: introduce the `ref_transaction_update_reflog` function
refs: add `committer_info` to `ref_transaction_add_update()`
refs: extract out refname verification in transactions
refs/files: add count field to ref_lock
refs: add `index` field to `struct ref_udpate`
refs: include committer info in `ref_update` struct
Junio C Hamano [Mon, 23 Dec 2024 17:32:27 +0000 (09:32 -0800)]
Merge branch 'ma/asciidoctor-build-fixes'
A topic to optionally build with meson, which has graduated to
'master' recently, broke Documentation pipeline with asciidoctor
for the normal Makefile build as well as meson-based one, which
have been corrected.
Junio C Hamano [Mon, 23 Dec 2024 17:32:26 +0000 (09:32 -0800)]
Merge branch 'ps/build-hotfix'
A topic to optionally build with meson, which has graduated to
'master' recently, has regressed the normal Makefile build, which
is being corrected.
* ps/build-hotfix:
meson: add options to override build information
GIT-VERSION-GEN: fix overriding GIT_BUILT_FROM_COMMIT and GIT_DATE
GIT-VERSION-GEN: fix overriding GIT_VERSION
Makefile: introduce template for GIT-VERSION-GEN
Makefile: drop unneeded indirection for GIT-VERSION-GEN outputs
Makefile: stop including "GIT-VERSION-FILE" in docs
Junio C Hamano [Mon, 23 Dec 2024 17:32:24 +0000 (09:32 -0800)]
Merge branch 'ps/ci-meson'
The meson-build procedure is integrated into CI to catch and
prevent bitrotting.
* ps/ci-meson:
ci: wire up Meson builds
t: introduce compatibility options to clar-based tests
t: fix out-of-tree tests for some git-p4 tests
Makefile: detect missing Meson tests
meson: detect missing tests at configure time
t/unit-tests: rename clar-based unit tests to have a common prefix
Makefile: drop -DSUPPRESS_ANNOTATED_LEAKS
ci/lib: support custom output directories when creating test artifacts
Junio C Hamano [Mon, 23 Dec 2024 17:32:17 +0000 (09:32 -0800)]
Merge branch 'js/range-diff-diff-merges'
"git range-diff" learned to optionally show and compare merge
commits in the ranges being compared, with the --diff-merges
option.
* js/range-diff-diff-merges:
range-diff: introduce the convenience option `--remerge-diff`
range-diff: optionally include merge commits' diffs in the analysis
Junio C Hamano [Mon, 23 Dec 2024 17:32:13 +0000 (09:32 -0800)]
Merge branch 'js/ps-build-cmake-fixup'
Build fixes for Windows.
* js/ps-build-cmake-fixup:
cmake/vcxproj: stop special-casing `remote-ext`
cmake: put the Perl modules into the correct location again
cmake: use the correct file name for the Perl header
cmake(mergetools): better support for out-of-tree builds
cmake: better support for out-of-tree builds follow-up
Junio C Hamano [Mon, 23 Dec 2024 17:32:10 +0000 (09:32 -0800)]
Merge branch 'ps/build-sign-compare'
Start working to make the codebase buildable with -Wsign-compare.
* ps/build-sign-compare:
t/helper: don't depend on implicit wraparound
scalar: address -Wsign-compare warnings
builtin/patch-id: fix type of `get_one_patchid()`
builtin/blame: fix type of `length` variable when emitting object ID
gpg-interface: address -Wsign-comparison warnings
daemon: fix type of `max_connections`
daemon: fix loops that have mismatching integer types
global: trivial conversions to fix `-Wsign-compare` warnings
pkt-line: fix -Wsign-compare warning on 32 bit platform
csum-file: fix -Wsign-compare warning on 32-bit platform
diff.h: fix index used to loop through unsigned integer
config.mak.dev: drop `-Wno-sign-compare`
global: mark code units that generate warnings with `-Wsign-compare`
compat/win32: fix -Wsign-compare warning in "wWinMain()"
compat/regex: explicitly ignore "-Wsign-compare" warnings
git-compat-util: introduce macros to disable "-Wsign-compare" warnings
Junio C Hamano [Mon, 23 Dec 2024 17:32:07 +0000 (09:32 -0800)]
Merge branch 'ps/ci-gitlab-update'
GitLab CI updates.
* ps/ci-gitlab-update:
ci/lib: fix "CI setup" sections with GitLab CI
ci/lib: do not interpret escape sequences in `group ()` arguments
ci/lib: remove duplicate trap to end "CI setup" group
gitlab-ci: update macOS images to Sonoma
Recent reftable updates mistook a NULL return from a request for
0-byte allocation as OOM and died unnecessarily, which has been
corrected.
* ps/reftable-alloc-failures-zalloc-fix:
reftable/basics: return NULL on zero-sized allocations
reftable/stack: fix zero-sized allocation when there are no readers
reftable/merged: fix zero-sized allocation when there are no readers
reftable/stack: don't perform auto-compaction with less than two tables
reftable/basics: return NULL on zero-sized allocations
In the preceding commits we have fixed a couple of issues when
allocating zero-sized objects. These issues were masked by
implementation-defined behaviour. Quoting malloc(3p):
If size is 0, either:
* A null pointer shall be returned and errno may be set to an
implementation-defined value, or
* A pointer to the allocated space shall be returned. The
application shall ensure that the pointer is not used to access an
object.
So it is perfectly valid that implementations of this function may or
may not return a NULL pointer in such a case.
Adapt both `reftable_malloc()` and `reftable_realloc()` so that they
return NULL pointers on zero-sized allocations. This should remove any
implementation-defined behaviour in our allocators and thus allows us to
detect such platform-specific issues more easily going forward.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/stack: fix zero-sized allocation when there are no readers
Similar as the preceding commit, we may try to do a zero-sized
allocation when reloading a reftable stack that ain't got any tables.
It is implementation-defined whether malloc(3p) returns a NULL pointer
in that case or a zero-sized object. In case it does return a NULL
pointer though it causes us to think we have run into an out-of-memory
situation, and thus we return an error.
Fix this by only allocating arrays when they have at least one entry.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/merged: fix zero-sized allocation when there are no readers
It was reported [1] that Git started to fail with an out-of-memory error
when initializing repositories with the reftable backend on NonStop
platforms. A bisect led to 802c0646ac (reftable/merged: handle
allocation failures in `merged_table_init_iter()`, 2024-10-02), which
changed how we allocate memory when initializing a merged table.
The root cause of this seems to be that NonStop returns a `NULL` pointer
when doing a zero-sized allocation. This would've already happened
before the above change, but we never noticed because we did not check
the result. Now we do notice and thus return an out-of-memory error to
the caller.
Fix the issue by skipping the allocation altogether in case there are no
readers.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reftable/stack: don't perform auto-compaction with less than two tables
In order to compact tables we need at least two tables. Bail out early
from `reftable_stack_auto_compact()` in case we have less than two
tables.
In the original, `stack_table_sizes_for_compaction()` yields an array
that has the same length as the number of tables. This array is then
passed on to `suggest_compaction_segment()`, which returns an empty
segment in case we have less than two tables. The segment is then passed
to `segment_size()`, which will return `0` because both start and end of
the segment are `0`. And because we only call `stack_compact_range()` in
case we have a positive segment size we don't perform auto-compaction at
all. Consequently, this change does not result in a user-visible change
in behaviour when called with a single table.
But when called with no tables this protects us against a potential
out-of-memory error: `stack_table_sizes_for_compaction()` would try to
allocate a zero-byte object when there aren't any tables, and that may
lead to a `NULL` pointer on some platforms like NonStop which causes us
to bail out with an out-of-memory error.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Fri, 20 Dec 2024 23:18:18 +0000 (00:18 +0100)]
asciidoctor-extensions.rb.in: inject GIT_DATE
After a38edab7c8 (Makefile: generate doc versions via GIT-VERSION-GEN,
2024-12-06), we no longer inject GIT_DATE when building with
Asciidoctor.
Replace the <date/> tag in the XML to inject the value of GIT_DATE.
Unlike <refmiscinfo/> as handled in a recent commit, we have no reason
to expect that this tag might be missing, so there's no need for "maybe
remove, then add" and we can just outright replace the one that
Asciidoctor has generated based on the mtime of the source file.
Compared to pre-a38edab7c8, we now end up injecting this also in the
build of Git.3pm, which until now has been using the mtime of Git.pm.
That is arguably even a good change since it results in more
reproducible builds.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Fri, 20 Dec 2024 23:18:17 +0000 (00:18 +0100)]
asciidoctor-extensions.rb.in: add missing word
Commit a38edab7c8 (Makefile: generate doc versions via GIT-VERSION-GEN,
2024-12-06) stopped providing an attribute value "Git $(GIT_VERSION)" to
asciidoc/Asciidoctor over the command line. Instead, we now provide the
attribute to asciidoc through a generated asciidoc.conf, where the value
is generated as "Git @GIT_VERSION@".
In the similar mechanism for Asciidoctor, we forgot the "Git" prefix.
Restore it.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the recent a38edab7c8 (Makefile: generate doc versions via
GIT-VERSION-GEN, 2024-12-06), building with Asciidoctor results in
manpages where the headers no longer contain "Git Manual" and the
footers no longer identify the built Git version.
Before a38edab7c8, we used to just provide a few attributes to
Asciidoctor (and asciidoc). Commit 7a30134358 (asciidoctor-extensions:
provide `<refmiscinfo/>`, 2019-09-16) noted that older versions of
Asciidoctor didn't propagate those attributes into the built XML files,
so we started injecting them ourselves from this script. With newer
versions of Asciidoctor, we'd end up with some harmless duplication
among the tags in the final XML.
Post-a38edab7c8, we don't provide these attributes and Asciidoctor
inserts empty-ish values. After our additions from 7a30134358, we get
When these are handled, it appears to be first come first served,
meaning that our additions have no effect and we regress as described in
the first paragraph.
Remove existing "source" or "manual" <refmiscinfo/> tags before adding
ours. I considered removing all <refmiscinfo/> to get a nice clean
slate, instead of just those two that we want to replace to be a bit
more precise. I opted for the latter. Maybe one day, Asciidoctor learns
to insert something useful there which `xmlto` can pick up and make good
use of -- let's not interfere.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 21 Dec 2024 01:34:25 +0000 (17:34 -0800)]
Merge branch 'ps/build-hotfix' into ma/asciidoctor-build-fixes
* ps/build-hotfix:
meson: add options to override build information
GIT-VERSION-GEN: fix overriding GIT_BUILT_FROM_COMMIT and GIT_DATE
GIT-VERSION-GEN: fix overriding GIT_VERSION
Makefile: introduce template for GIT-VERSION-GEN
Makefile: drop unneeded indirection for GIT-VERSION-GEN outputs
Makefile: stop including "GIT-VERSION-FILE" in docs
We inject various different kinds of build information into build
artifacts, like the version string or the commit from which Git was
built. Add options to let users explicitly override this information
with Meson.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT-VERSION-GEN: fix overriding GIT_BUILT_FROM_COMMIT and GIT_DATE
Same as with the preceding commit, neither GIT_BUILT_FROM_COMMIT nor
GIT_DATE can be overridden via the environment. Especially the latter is
of importance given that we set it in our own "Documentation/doc-diff"
script.
Make the values of both variables overridable. Luckily we don't pull in
these values via any included Makefiles, so the fix is trivial compared
to the fix for GIT_VERSON.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT-VERSION-GEN tries to derive the version that Git is being built from
via multiple different sources in the following order:
1. A file called "version" in the source tree's root directory, if it
exists.
2. The current commit in case Git is built from a Git repository.
3. Otherwise, we use a fallback version stored in a variable which is
bumped whenever a new Git version is getting tagged.
It used to be possible to override the version by overriding the
`GIT_VERSION` Makefile variable (e.g. `make GIT_VERSION=foo`). This
worked somewhat by chance, only: `GIT-VERSION-GEN` would write the
actual Git version into `GIT-VERSION-FILE`, not the overridden value,
but when including the file into our Makefile we would not override the
`GIT_VERSION` variable because it has already been set by the user. And
because our Makefile used the variable to propagate the version to our
build tools instead of using `GIT-VERSION-FILE` the resulting build
artifacts used the overridden version.
But that subtle mechanism broke with 4838deab65 (Makefile: refactor
GIT-VERSION-GEN to be reusable, 2024-12-06) and subsequent commits
because the version information is not propagated via the Makefile
variable anymore, but instead via the files that `GIT-VERSION-GEN`
started to write. And as the script never knew about the `GIT_VERSION`
environment variable in the first place it uses one of the values listed
above instead of the overridden value.
Fix this issue by making `GIT-VERSION-GEN` handle the case where
`GIT_VERSION` has been set via the environment.
Note that this requires us to introduce a new GIT_VERSION_OVERRIDE
variable that stores a potential user-provided value, either via the
environment or via "config.mak". Ideally we wouldn't need it and could
just continue to use GIT_VERSION for this. But unfortunately, Makefiles
will first include all sub-Makefiles before figuring out whether it
needs to re-make any of them [1]. Consequently, if there already is a
GIT-VERSION-FILE, we would have slurped in its value of GIT_VERSION
before we call GIT-VERSION-GEN, and because GIT-VERSION-GEN now uses
that value as an override it would mean that the first generated value
for GIT_VERSION will remain unchanged.
Furthermore we have to move the include for "GIT-VERSION-FILE" after the
includes for "config.mak" and related so that GIT_VERSION_OVERRIDE can
be set to the value provided by "config.mak".
Introduce a new template to call GIT-VERSION-GEN. This will allow us to
iterate on how exactly the script is called in subsequent commits
without having to adapt all call sites every time.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: drop unneeded indirection for GIT-VERSION-GEN outputs
Some of the callsites of GIT-VERSION-GEN generate the target file with a
"+" suffix first and then move the file into place when the new contents
are different compared to the old contents. This allows us to avoid a
needless rebuild by not updating timestamps of the target file when its
contents will remain unchanged anyway.
In fact though, this exact logic is already handled in GIT-VERSION-GEN,
so doing this manually is pointless. This is a leftover from an earlier
version of 4838deab65 (Makefile: refactor GIT-VERSION-GEN to be
reusable, 2024-12-06), where the script didn't handle that logic for us.
Drop the needless indirection.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: stop including "GIT-VERSION-FILE" in docs
We include "GIT-VERSION-FILE" in our docs Makefile, but don't actually
use the "GIT_VERSION" variable that it provides. This is a leftover from
the conversion to make "GIT-VERSION-GEN" generate version information
in-place by substituting placeholders in 4838deab65 (Makefile: refactor
GIT-VERSION-GEN to be reusable, 2024-12-06) and subsequent commits,
where all usages of the variable were removed.
Stop including the file.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to configure a Git build without Perl when disabling both
our test suite and all Perl-based features. In Meson, this can be
achieved with `meson setup -Dperl=disabled -Dtests=false`.
It was reported by a user that this breaks the Meson build because
gitweb gets built even if Perl was not discovered in such a build:
$ meson setup .. -Dtests=false -Dperl=disabled
...
../gitweb/meson.build:2:43: ERROR: Unable to get the path of a not-found external program
Fix this issue by introducing a new feature-option that allows the user
to configure whether or not to build Gitweb. The feature is set to
'auto' by default and will be disabled automatically in case Perl was
not found on the system.
Reported-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik Nayak [Fri, 20 Dec 2024 12:58:37 +0000 (13:58 +0100)]
refs: mark invalid refname message for translation
The error message produced by `transaction_refname_valid()` changes based
on whether the update is a ref update or a reflog update, with the use
of a ternary operator. This breaks translation since the sub-msg is not
marked for translation. Fix this by setting the entire message using a
`if {} else {}` block and marking each message for translation.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 20 Dec 2024 08:49:49 +0000 (03:49 -0500)]
prio-queue: use size_t rather than int for size
The alloc and nr fields of a prio-queue tell us how much memory is
allocated and used in the array. So the natural type for them is size_t,
which prevents overflow on 64-bit systems where "int" is still 32 bits.
This is unlikely to happen in practice, as we typically use it for
storing commits, and having 2^31 of those is rather a lot. But it's good
to keep our generic data structures as flexible as possible. And as we
start to enforce -Wsign-compare, it means that callers need to use
"int", too, and the problem proliferates. Let's fix it at the source.
The changes here can be put into a few groups:
1. Changing the alloc/nr fields in the struct to size_t. This requires
swapping out int for size_t in negotiator/skipping.c, as well as
in prio_queue_get(), because those all iterate over the array.
Building with -Wsign-compare complains about these.
2. Other code that assigns or passes around indexes into the array
(e.g., the swap() and compare() functions) won't trigger
-Wsign-compare because we are simply truncating the values. These
are caught by -Wconversion, but I've adjusted them here to
future-proof us.
3. In prio_queue_reverse() we compute "queue->nr - 1" without checking
if anything is in the queue, which underflows now that nr is
unsigned. We can fix that by returning early when the queue is
empty (there is nothing to reverse).
4. The insertion_ctr variable is currently unsigned, but can likewise
grow (it is actually worse, because adding and removing an element
many times will keep increasing the counter, even though "nr" does
not). I've bumped that to size_t here, as well.
But -Wconversion notes that computing the "cmp" result by
subtracting the counters and assigning to "int" is a potential
problem. And that's true even before this patch, since we use an
unsigned counter (imagine comparing "2^32-1" and "0", which should
be a high positive value, but instead is "-1" as a signed int).
Since we only care about the sign (and not the magnitude) of the
result, we could fix this by swapping out the subtraction for a
ternary comparison. Probably the performance impact would be
negligible, since we just called into a custom compare function and
branched on its result anyway. But it's easy enough to do a
branchless version by subtracting the comparison results.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bundle create" with an annotated tag on the positive end of
the revision range had a workaround code for older limitation in
the revision walker, which has become unnecessary.
Junio C Hamano [Thu, 19 Dec 2024 18:58:28 +0000 (10:58 -0800)]
Merge branch 'jc/set-head-symref-fix'
"git fetch" from a configured remote learned to update a missing
remote-tracking HEAD but it asked the remote about their HEAD even
when it did not need to, which has been corrected. Incidentally,
this also corrects "git fetch --tags $URL" which was broken by the
new feature in an unspecified way.
* jc/set-head-symref-fix:
fetch: do not ask for HEAD unnecessarily
Junio C Hamano [Thu, 19 Dec 2024 18:58:27 +0000 (10:58 -0800)]
Merge branch 'bf/set-head-symref'
When "git fetch $remote" notices that refs/remotes/$remote/HEAD is
missing and discovers what branch the other side points with its
HEAD, refs/remotes/$remote/HEAD is updated to point to it.
* bf/set-head-symref:
fetch set_head: handle mirrored bare repositories
fetch: set remote/HEAD if it does not exist
refs: add create_only option to refs_update_symref_extended
refs: add TRANSACTION_CREATE_EXISTS error
remote set-head: better output for --auto
remote set-head: refactor for readability
refs: atomically record overwritten ref in update_symref
refs: standardize output of refs_read_symbolic_ref
t/t5505-remote: test failure of set-head
t/t5505-remote: set default branch to main
Taylor Blau [Fri, 13 Dec 2024 19:20:02 +0000 (14:20 -0500)]
pack-bitmap.c: ensure pack validity for all reuse packs
Commit 44f9fd6496 (pack-bitmap.c: check preferred pack validity when
opening MIDX bitmap, 2022-05-24) prevents a race condition whereby the
preferred pack disappears between opening the MIDX bitmap and attempting
verbatim reuse out of its packs.
That commit forces open_midx_bitmap_1() to ensure the validity of the
MIDX's preferred pack, meaning that we have an open file handle on the
*.pack, ensuring that we can reuse bytes out of verbatim later on in the
process[^1].
But 44f9fd6496 was not extended to cover multi-pack reuse, meaning that
this same race condition exists for non-preferred packs during verbatim
reuse. Work around that race in the same way by only marking valid packs
as reuse-able. For packs that aren't reusable, skip over them but
include the number of objects they have to ensure we allocate a large
enough 'reuse' bitmap (e.g. if a pack in the middle of the MIDX
disappeared but we still want to reuse later packs).
Since we're ensuring the validity of these packs within the verbatim
reuse code, we no longer have to special-case the preferred pack and
open it within the open_midx_bitmap_1() function.
An alternative approach to the one taken here would be to open all
MIDX'd packs from within open_midx_bitmap_1(). But that would be both
slower and make the bitmaps less useful, since we can still perform some
pack reuse among the packs that still exist when the *.bitmap is opened.
After applying this patch, we can simulate the new behavior after
instrumenting Git like so:
Note that we could relax the single-pack version of this which was most
recently addressed in dc1daacdcc (pack-bitmap: check pack validity when
opening bitmap, 2021-07-23), but only partially. Because we still need
to know the object count in the pack, we'd still have to open the pack's
*.idx, so the savings there are marginal.
Note likewise that we add a new "if (!packs_nr)" early return in the
pack reuse code to avoid a potentially expensive allocation on the
'reuse' bitmap in the case that no packs are available for reuse.
[^1]: Unless we run out of open file handles. If that happens and we are
forced to close the only open file handle of a file that has been
removed from underneath us, there is nothing we can do.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kyle Lippincott [Wed, 18 Dec 2024 00:57:02 +0000 (00:57 +0000)]
doc: remove extra quotes in generated docs
Commit a38edab7c8 (Makefile: generate doc versions via GIT-VERSION-GEN,
2024-12-06) moved these variables from the Makefile to asciidoc.conf.in.
When doing so, some extraneous quotes were added; these are visible in
the generated .xml files, at least, and possibly in other locations:
Junio C Hamano [Wed, 18 Dec 2024 00:17:28 +0000 (16:17 -0800)]
Merge https://github.com/j6t/gitk
* 'master' of https://github.com/j6t/gitk:
gitk: offer "Copy commit ID to X11 selection" only on X11
gitk: support auto-copy comit ID to primary clipboard
gitk: prefs dialog: refine Auto-select UI
gitk: UI text: change "SHA1 ID" to "Commit ID"
gitk: add text wrapping preferences
gitk: make headings of preferences bold
gitk: check main window visibility before waiting for it to show
gitk: sv.po: Update Swedish translation (323t)
Johannes Sixt [Tue, 17 Dec 2024 20:54:58 +0000 (21:54 +0100)]
Merge branch 'ah/commit-id-to-clipboard'
* ah/commit-id-to-clipboard:
gitk: offer "Copy commit ID to X11 selection" only on X11
gitk: support auto-copy comit ID to primary clipboard
gitk: prefs dialog: refine Auto-select UI
gitk: UI text: change "SHA1 ID" to "Commit ID"
When the `vcxproj` target was introduced in `config.mak.uname` to allow
building Git with the Visual C toolchain, the `git remote-ext` command
was always executed in its dashed form. Therefore, it was impossible to
pass the test suite unless that command existed in its dashed form, and
we had to special-case this.
Later, when the `vcxproj` target got out of fashion because Visual
Studio gained native support for CMake builds, this special-casing was
copied without questioning it.
But as of 675df192c5f (transport-helper: do not run git-remote-ext etc.
in dashed form, 2020-08-26), the reason for this special-casing no
longer exists. So let's just drop it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmake: put the Perl modules into the correct location again
In ccfba9e0c45 (Makefile: use "generate-perl.sh" to massage Perl
library, 2024-12-06), the previous strategy (which avoided spawning a
shell script to transform the files) was replaced by the same
`generate-perl.sh` invocation as for the Makefile-based build.
The only difference is that now the transformation tries to handle the
Perl modules in-place (which ends up in empty files because the same
file is used as input and output via stdin/stdout redirection), and the
Perl script cannot find them anymore because they are not in the
expected place.
Let's put them into the expected place again, i.e. into
`perl/build/lib/` instead of `perl/`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmake: use the correct file name for the Perl header
In e4b488049a5 (Makefile: extract script to massage Perl scripts,
2024-12-06), the code was refactored that is used to transform the Perl
scripts/modules to their final form.
Even the CMake-based build was adjusted, but the change used the file
name `PERL-HEADER` instead of the file name used by the Makefile-based
build (same name but with the `GIT-` prefix). Let's adjust the former to
the latter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmake(mergetools): better support for out-of-tree builds
In 7e0730c8baa (t: better support for out-of-tree builds, 2024-12-06)
the strategy was changed from letting `t7609-mergetool--lib.sh`
hard-code the directory where it expects to find the merge tools to
hard-coding that value in the placeholder `@GIT_TEST_MERGE_TOOLS_DIR@`
that is replaced during the build.
However, likely due to a copy/paste mistake (and reviewers missed this,
too), the CMake-based build was adjusted incorrectly, replacing that
placeholder not with the path to the merge tools, but with a Boolean
indicating whether to use a runtime-generated path prefix or not.
Let's fix that, addressing this CMake-build's symptom:
Initialized empty Git repository in D:/a/git/git/t/trash directory.t7609-mergetool--lib/.git/
++ . true/vimdiff
./test-lib.sh: line 1021: true/vimdiff: No such file or directory
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmake: better support for out-of-tree builds follow-up
In 7e0730c8baa (t: better support for out-of-tree builds, 2024-12-06),
the `bin-wrappers/` strategy was changed so that it no longer hard-codes
the template directory to be `@BUILD_DIR@/templates/blt`, but instead
interpolates the `@TEMPLATE_DIR@` placeholder during the build.
However, this commit only adjusted the `Makefile`-based build.
Let's adjust the CMake-based build as well. This fixes t0000.15 which
would otherwise fail with:
++ echo ''\''t1234-verbose/err'\'' is not empty, it contains:'
't1234-verbose/err' is not empty, it contains:
++ cat t1234-verbose/err
warning: templates not found in @TEMPLATE_DIR@
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
GitHub ci(windows): speed up initializing Git for Windows' minimal SDK again
It used to be the case that initializing the minimal SDK (i.e. a
radically slimmed-down subset of Git for Windows' development
environment intended to perform the CI builds and little else) took
a bit over one minute, would then be cached, and subsequent jobs would
take at most half a dozen seconds to initialize said minimal SDK.
It is important that this step is fast because we have to run the test
suite in parallel, in a set of matrix jobs, to offset the slowness of
the shell-based test suite, and each and every job has to initialize the
very same minimal SDK.
While it may sound as if parallelizing the jobs might only waste the
generously-provided build minutes but at least the _wallclock_ time
would pass quick, in reality it matters a lot: Frequently Git for
Windows' or GitGitGadget PRs get stuck waiting for quite a while before
CI builds start because other PRs' builds still spend substantial
amounts of time to run, blocking due to the concurrency limit being
reached.
Since 91839a88277 (ci: create script to set up Git for Windows SDK,
2024-10-09), the situation has worsened: every job that requires the
minimal Git for Windows SDK spends roughly two-and-a-half minutes doing
so.
With the switch away from the GitHub Action `setup-git-for-windows-sdk`,
we incurred more downsides:
- It is no longer possible for said Action to fix problems independently
from the Git repository, e.g. when new rules about GitHub Actions
require changes in the way the minimal SDK is initialized.
- The minimal SDK was installed specifically outside of the worktree so
as not to clutter it nor incur an additional cost to verify that the
worktree is clean.
Therefore, even if it would be nice to have a shared process between
GitHub and GitLab based CI builds, let's switch the GitHub-based CI back
to the tried-and-tested `setup-git-for-windows-sdk` Action.
This commit partially reverts 91839a88277 (ci: create script to set up
Git for Windows SDK, 2024-10-09).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 391bceae435 (compat/mingw: support POSIX semantics for atomic
renames, 2024-10-27), we taught the `mingw_rename()` function to respect
POSIX semantics, but we did so only as a fallback after `_wrename()`
fails.
This hid a bug in the implementation that was not caught by Git's test
suite: The `CreateFileW()` function _can_ open handles to directories,
but not when asked to use the `FILE_ATTRIBUTE_NORMAL` flag, as that flag
only is allowed for files.
Let's fix this by using the common `FILE_FLAG_BACKUP_SEMANTICS` flag
that can be used for opening handles to directories, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik Nayak [Mon, 16 Dec 2024 16:44:33 +0000 (17:44 +0100)]
refs: add support for migrating reflogs
The `git refs migrate` command was introduced in 25a0023f28 (builtin/refs: new command to migrate ref storage formats,
2024-06-06) to support migrating from one reference backend to another.
One limitation of the command was that it didn't support migrating
repositories which contained reflogs. A previous commit, added support
for adding reflog updates in ref transactions. Using the added
functionality bake in reflog support for `git refs migrate`.
To ensure that the order of the reflogs is maintained during the
migration, we add the index for each reflog update as we iterate over
the reflogs from the old reference backend. This is to ensure that the
order is maintained in the new backend.
Helped-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik Nayak [Mon, 16 Dec 2024 16:44:32 +0000 (17:44 +0100)]
refs: allow multiple reflog entries for the same refname
The reference transaction only allows a single update for a given
reference to avoid conflicts. This, however, isn't an issue for reflogs.
There are no conflicts to be resolved in reflogs and when migrating
reflogs between backends we'd have multiple reflog entries for the same
refname.
So allow multiple reflog updates within a single transaction. Also the
reflog creation logic isn't exposed to the end user. While this might
change in the future, currently, this reduces the scope of issues to
think about.
In the reftable backend, the writer sorts all updates based on the
update_index before writing to the block. When there are multiple
reflogs for a given refname, it is essential that the order of the
reflogs is maintained. So add the `index` value to the `update_index`.
The `index` field is only set when multiple reflog entries for a given
refname are added and as such in most scenarios the old behavior
remains.
This is required to add reflog migration support to `git refs migrate`.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik Nayak [Mon, 16 Dec 2024 16:44:31 +0000 (17:44 +0100)]
refs: introduce the `ref_transaction_update_reflog` function
Introduce a new function `ref_transaction_update_reflog`, for clients to
add a reflog update to a transaction. While the existing function
`ref_transaction_update` also allows clients to add a reflog entry, this
function does a few things more, It:
- Enforces that only a reflog entry is added and does not update the
ref itself.
- Allows the users to also provide the committer information. This
means clients can add reflog entries with custom committer
information.
The `transaction_refname_valid()` function also modifies the error
message selectively based on the type of the update. This change also
affects reflog updates which go through `ref_transaction_update()`.
A follow up commit will utilize this function to add reflog support to
`git refs migrate`.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik Nayak [Mon, 16 Dec 2024 16:44:30 +0000 (17:44 +0100)]
refs: add `committer_info` to `ref_transaction_add_update()`
The `ref_transaction_add_update()` creates the `ref_update` struct. To
facilitate addition of reflogs in the next commit, the function needs to
accommodate setting the `committer_info` field in the struct. So modify
the function to also take `committer_info` as an argument and set it
accordingly.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik Nayak [Mon, 16 Dec 2024 16:44:29 +0000 (17:44 +0100)]
refs: extract out refname verification in transactions
Unless the `REF_SKIP_REFNAME_VERIFICATION` flag is set for an update,
the refname of the update is verified for:
- Ensuring it is not a pseudoref.
- Checking the refname format.
These checks will also be needed in a following commit where the
function to add reflog updates to the transaction is introduced. Extract
the code out into a new static function.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik Nayak [Mon, 16 Dec 2024 16:44:28 +0000 (17:44 +0100)]
refs/files: add count field to ref_lock
When refs are updated in the files-backend, a lock is obtained for the
corresponding file path. This is the case even for reflogs, i.e. a lock
is obtained on the reference path instead of the reflog path. This
works, since generally, reflogs are updated alongside the ref.
The upcoming patches will add support for reflog updates in ref
transaction. This means, in a particular transaction we want to have ref
updates and reflog updates. For a given ref in a given transaction there
can be at most one update. But we can theoretically have multiple reflog
updates for a given ref in a given transaction. A great example of this
would be when migrating reflogs from one backend to another. There we
would batch all the reflog updates for a given reference in a single
transaction.
The current flow does not support this, because currently refs & reflogs
are treated as a single entity and capture the lock together. To
separate this, add a count field to ref_lock. With this, multiple
updates can hold onto a single ref_lock and the lock will only be
released when all of them release the lock.
This patch only adds the `count` field to `ref_lock` and adds the logic
to increment and decrement the lock. In a follow up commit, we'll
separate the reflog update logic from ref updates and utilize this
functionality.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik Nayak [Mon, 16 Dec 2024 16:44:27 +0000 (17:44 +0100)]
refs: add `index` field to `struct ref_udpate`
The reftable backend, sorts its updates by refname before applying them,
this ensures that the references are stored sorted. When migrating
reflogs from one backend to another, the order of the reflogs must be
maintained. Add a new `index` field to the `ref_update` struct to
facilitate this.
This field is used in the reftable backend's sort comparison function
`transaction_update_cmp`, to ensure that indexed fields maintain their
order.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Karthik Nayak [Mon, 16 Dec 2024 16:44:26 +0000 (17:44 +0100)]
refs: include committer info in `ref_update` struct
The reference backends obtain the committer information from
`git_committer_info(0)` when adding a reflog. The upcoming patches
introduce support for migrating reflogs between the reference backends.
This requires an interface to creating reflogs, including custom
committer information.
Add a new field `committer_info` to the `ref_update` struct, which is
then used by the reference backends. If there is no `committer_info`
provided, the reference backends default to using
`git_committer_info(0)`. The field itself cannot be set to
`git_committer_info(0)` since the values are dynamic and must be
obtained right when the reflog is being committed.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-diff: introduce the convenience option `--remerge-diff`
Just like `git log`, now also `git range-diff` has that option as a
shortcut for the common operation that would otherwise require the quite
unwieldy (if theoretically "more correct") `--diff-mode=remerge` option.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-diff: optionally include merge commits' diffs in the analysis
The `git log` command already offers support for including diffs for
merges, via the `--diff-merges=<format>` option.
Let's add corresponding support for `git range-diff`, too. This makes it
more convenient to spot differences between commit ranges that contain
merges.
This is especially true in scenarios with non-trivial merges, i.e.
merges introducing changes other than, or in addition to, what merge ORT
would have produced. Merging a topic branch that changes a function
signature into a branch that added a caller of that function, for
example, would require the merge commit itself to adjust that caller to
the modified signature.
In my code reviews, I found the `--diff-merges=remerge` option
particularly useful.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 16 Dec 2024 01:54:32 +0000 (17:54 -0800)]
Merge branch 'ps/build'
Build procedure update plus introduction of Meson based builds.
* ps/build: (24 commits)
Introduce support for the Meson build system
Documentation: add comparison of build systems
t: allow overriding build dir
t: better support for out-of-tree builds
Documentation: extract script to generate a list of mergetools
Documentation: teach "cmd-list.perl" about out-of-tree builds
Documentation: allow sourcing generated includes from separate dir
Makefile: simplify building of templates
Makefile: write absolute program path into bin-wrappers
Makefile: allow "bin-wrappers/" directory to exist
Makefile: refactor generators to be PWD-independent
Makefile: extract script to generate gitweb.js
Makefile: extract script to generate gitweb.cgi
Makefile: extract script to massage Python scripts
Makefile: extract script to massage Shell scripts
Makefile: use "generate-perl.sh" to massage Perl library
Makefile: extract script to massage Perl scripts
Makefile: consistently use PERL_PATH
Makefile: generate doc versions via GIT-VERSION-GEN
Makefile: generate "git.rc" via GIT-VERSION-GEN
...
Junio C Hamano [Mon, 16 Dec 2024 01:54:26 +0000 (17:54 -0800)]
Merge branch 'jc/forbid-head-as-tagname'
"git tag" has been taught to refuse to create refs/tags/HEAD
as such a tag will be confusing in the context of UI provided by
the Git Porcelain commands.
* jc/forbid-head-as-tagname:
tag: "git tag" refuses to use HEAD as a tagname
t5604: do not expect that HEAD can be a valid tagname
refs: drop strbuf_ prefix from helpers
refs: move ref name helpers around
Junio C Hamano [Mon, 16 Dec 2024 01:54:25 +0000 (17:54 -0800)]
Merge branch 'jk/describe-perf'
"git describe" optimization.
* jk/describe-perf:
describe: split "found all tags" and max_candidates logic
describe: stop traversing when we run out of names
describe: stop digging for max_candidates+1
t/perf: add tests for git-describe
t6120: demonstrate weakness in disjoint-root handling
Junio C Hamano [Fri, 13 Dec 2024 15:33:44 +0000 (07:33 -0800)]
Merge branch 'kn/midx-wo-the-repository'
Yet another "pass the repository through the callchain" topic.
* kn/midx-wo-the-repository:
midx: inline the `MIDX_MIN_SIZE` definition
midx: pass down `hash_algo` to functions using global variables
midx: pass `repository` to `load_multi_pack_index`
midx: cleanup internal usage of `the_repository` and `the_hash_algo`
midx-write: pass down repository to `write_midx_file[_only]`
write-midx: add repository field to `write_midx_context`
midx-write: use `revs->repo` inside `read_refs_snapshot`
midx-write: pass down repository to static functions
packfile.c: remove unnecessary prepare_packed_git() call
midx: add repository to `multi_pack_index` struct
config: make `packed_git_(limit|window_size)` non-global variables
config: make `delta_base_cache_limit` a non-global variable
packfile: pass down repository to `for_each_packed_object`
packfile: pass down repository to `has_object[_kept]_pack`
packfile: pass down repository to `odb_pack_name`
packfile: pass `repository` to static function in the file
packfile: use `repository` from `packed_git` directly
packfile: add repository to struct `packed_git`
projects / thirdparty / git.git / log
