media Kconfig has two entries associated to V4L API:
VIDEO_DEV and VIDEO_V4L2.
On Kernel 2.6.x, there were two V4L APIs, each one with its own flag.
VIDEO_DEV were meant to:
1) enable Video4Linux and make its Kconfig options to appear;
2) it makes the Kernel build the V4L core.
while VIDEO_V4L2 where used to distinguish between drivers that
implement the newer API and drivers that implemented the former one.
With time, such meaning changed, specially after the removal of
all V4L version 1 drivers.
At the current implementation, VIDEO_DEV only does (1): it enables
the media options related to V4L, that now has:
menu "Video4Linux options"
visible if VIDEO_DEV
source "drivers/media/v4l2-core/Kconfig"
endmenu
but it doesn't affect anymore the V4L core drivers.
The rationale is that the V4L2 core has a "soft" dependency
at the I2C bus, and now requires to select a number of other
Kconfig options:
media: platform/*/Kconfig: make manufacturer menus more uniform
Do some adjustments at the per-vendor Kconfig, adding a comment at
the beginning in order to identify the manufacturer, and adjust
a few entries to make them look more uniform.
Pratyush Yadav [Fri, 21 Jan 2022 14:29:00 +0000 (19:59 +0530)]
media: platform: re-structure TI drivers
The ti-vpe/ sub-directory does not only contain the VPE-specific things.
It also contains the CAL driver, which is a completely different
subsystem. This is also not a good place to add new drivers for other TI
platforms since they will all get mixed up.
Separate the VPE and CAL parts into different sub-directories and rename
the ti-vpe/ sub-directory to ti/. This is now the place where new TI
platform drivers can be added.
[mchehab: rebased to apple on the top of media/platform/Kconfig series] Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media: platform: Kconfig: place platform drivers on a submenu
Just like media bus drivers, place platform drivers on a
submenu, in order to better organize user-selection:
Media drivers --->
*** media drivers ***
[*] Media USB Adapters --->
[*] Media PCI Adapters --->
-*- Radio Adapters --->
[*] Media platform devices --->
*** MMC/SDIO DVB adapters ***
< > Siano SMS1xxx based MDTV via SDIO interface
[*] V4L test drivers --->
[*] DVB test drivers --->
*** FireWire (IEEE 1394) Adapters ***
<*> FireDTV and FloppyDTV
*** common driver options ***
[ ] Enable Remote Controller support for Siano devices
[ ] Enable debugfs for smsdvb
As this submenu depends on MEDIA_PLATFORM_DRIVERS and defaults to "y",
there's no need to change already-existing .config entries, nor touch
the several make *_defconfig.
As there are 4 manufacturer's directories with multiple sources
(qcom, rockchip, sti and sunxi), move the sources from
platform/Kconfig to their specific Konfig files.
media: platform: move platform menu dependencies to drivers
Right now, platform dependencies are organized by the type of
the platform driver. Yet, things tend to become very messy with
time. The better seems to organize the drivers per manufacturer,
as other Kernel subsystems are doing.
As a preparation for such purpose, get rid of menuconfigs,
moving the per-menu dependencies to be at the driver-specifig
config entires.
This shoud give flexibility to reorganize the platform drivers
per manufacturer and re-sort them.
This patch removes all "if..endif" options from the platform
Kconfig, converting them into depends on.
media: platform: Makefile: reorganize its contents
There are lots of inconsistencies here: some directories are
included as-is, and others included using one (or more) symbols
that are inside it. Also, its entries are not sorted.
That makes it harder to maintain.
Reorganize it by placing everything on alphabetic order and
providing some hints about how patches for such file is expected.
It is hard to keep all those options aligned as newer config
changes get added, and we really don't want to have patches adding
new options also touching already existing entries.
Merge tag 'br-v5.18s' of git://linuxtv.org/hverkuil/media_tree into media_stage
Tag branch
* tag 'br-v5.18s' of git://linuxtv.org/hverkuil/media_tree:
ivtv: fix incorrect device_caps for ivtvfb
media: rcar-csi2: Drop comma after SoC match table sentinel
media: camss: Replace hard coded value with parameter
media: saa7134: fix incorrect use to determine if list is empty
media: MAINTAINERS: update rksip1 maintainers info
MAINTAINERS: update media vimc driver maintainers
media: i2c: max2175: Use rbtree rather than flat register cache
Hans Verkuil [Sun, 6 Mar 2022 11:29:11 +0000 (12:29 +0100)]
ivtv: fix incorrect device_caps for ivtvfb
The VIDIOC_G_FBUF and related overlay ioctls no longer worked (-ENOTTY was
returned).
The root cause was the introduction of the caps field in ivtv-driver.h.
While loading the ivtvfb module would update the video_device device_caps
field with V4L2_CAP_VIDEO_OUTPUT_OVERLAY it would not update that caps
field, and that's what the overlay ioctls would look at.
It's a bad idea to keep information in two places, so drop the caps field
and only use vdev.device_caps.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Martin Dauskardt <martin.dauskardt@gmx.de> Fixes: 2161536516ed (media: media/pci: set device_caps in struct video_device)
media: camss: Replace hard coded value with parameter
Kernel test robot reported below warning ->
drivers/media/platform/qcom/camss/camss-csid-gen2.c:407:3:
warning: Value stored to 'val' is never read
[clang-analyzer-deadcode.DeadStores]
Replace hard coded value with val.
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jakob Koschel [Mon, 28 Feb 2022 14:26:26 +0000 (15:26 +0100)]
media: saa7134: fix incorrect use to determine if list is empty
'dev' will *always* be set by list_for_each_entry().
It is incorrect to assume that the iterator value will be NULL if the
list is empty.
Instead of checking the pointer it should be checked if
the list is empty.
Fixes: 79dd0c69f05f ("V4L: 925: saa7134 alsa is now a standalone module") Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Shuah Khan [Wed, 23 Feb 2022 00:48:01 +0000 (17:48 -0700)]
MAINTAINERS: update media vimc driver maintainers
Based on the dicussion with Hans Verkuil and others in the thread below,
vimc is need of a maintainer. I will start maintaining the driver with
help from Kieran Bingham as the reviewer.
Mark Brown [Tue, 22 Feb 2022 21:52:44 +0000 (21:52 +0000)]
media: i2c: max2175: Use rbtree rather than flat register cache
The max2175 uses a flat register cache but supplies only a single default
value and has many volatile registers. This is a poor fit for a flat cache
since the cache will assume a default of zero for any register not yet
written which can lead to bugs for example when regmap_update_bits()
suppresses a noop write. A rbtree cache is a much better fit, this will
only cache default values and values that have been written to the device
with any reads of uncached values going to the hardware. Convert the driver
to use a rbtree cache.
Since the device is controlled via I2C the cost of manging the rbtree
should be immaterial compared to the cost of accessing the device.
Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Ming Qian [Thu, 24 Feb 2022 03:10:04 +0000 (11:10 +0800)]
media: amphion: add vpu v4l2 m2m support
vpu_v4l2.c implements the v4l2 m2m driver methods.
vpu_helpers.c implements the common helper functions
vpu_color.c converts the v4l2 colorspace with
the VUI parameters that specified by ITU-T | ISO/IEC
Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Shijie Qin <shijie.qin@nxp.com> Signed-off-by: Zhou Peng <eagle.zhou@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Ming Qian [Thu, 24 Feb 2022 03:10:03 +0000 (11:10 +0800)]
media: amphion: implement vpu core communication based on mailbox
driver use mailbox to communicate with vpu core.
and there are a command buffer and a message buffer.
driver will write commands to the command buffer,
then trigger a vpu core interrupt
vpu core will write messages to the message buffer,
then trigger a cpu interrupt.
Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Shijie Qin <shijie.qin@nxp.com> Signed-off-by: Zhou Peng <eagle.zhou@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Ming Qian [Thu, 24 Feb 2022 03:10:01 +0000 (11:10 +0800)]
media: amphion: add amphion vpu device driver
The amphion vpu codec ip contains encoder and decoder.
Windsor is the encoder, it supports to encode H.264.
Malone is the decoder, it features a powerful
video processing unit able to decode many formats,
such as H.264, HEVC, and other formats.
This Driver is for this IP that is based on the v4l2 mem2mem framework.
Supported SoCs are: IMX8QXP, IMX8QM
Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Shijie Qin <shijie.qin@nxp.com> Signed-off-by: Zhou Peng <eagle.zhou@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Ming Qian [Thu, 24 Feb 2022 03:10:00 +0000 (11:10 +0800)]
media: add nv12m_8l128 and nv12m_10be_8l128 video format.
nv12m_8l128 is 8-bit tiled nv12 format used by amphion decoder.
nv12m_10be_8l128 is 10-bit tiled format used by amphion decoder.
The tile size is 8x128
Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Shijie Qin <shijie.qin@nxp.com> Signed-off-by: Zhou Peng <eagle.zhou@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Merge tag 'for-5.18-2.6-signed' of git://linuxtv.org/sailus/media_tree into media_stage
Even yet more V4L2 patches for 5.18
* tag 'for-5.18-2.6-signed' of git://linuxtv.org/sailus/media_tree:
media: i2c: Fix pixel array positions in ov8865
media: adv7183: Convert to GPIO descriptors
media: m5mols: Convert to use GPIO descriptors
media: noon010p30: Convert to use GPIO descriptors
media: mt9m111: Drop unused include
media: adv7511: Drop unused include
media: i2c: isl7998x: Add driver for Intersil ISL7998x
media: dt-bindings: Add Intersil ISL79987 DT bindings
media: media-entity: Clarify media_entity_cleanup() usage
media: i2c: imx274: Drop surplus includes
media: i2c: ccs: Drop unused include
v4l: fwnode: Remove now-redundant loop from v4l2_fwnode_parse_reference()
v4l: fwnode: Drop redunant -ENODATA check in property reference parsing
media: media-entity: Simplify media_pipeline_start()
media: media-entity: Add media_pad_is_streaming() helper function
media: Add a driver for the og01a1b camera sensor
media: i2c: ov5648: Fix lockdep error
media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated
Sean Young [Sun, 20 Feb 2022 14:28:24 +0000 (15:28 +0100)]
media: gpio-ir-tx: fix transmit with long spaces on Orange Pi PC
Calling udelay for than 1000us does not always yield the correct
results.
Cc: stable@vger.kernel.org Reported-by: Михаил <vrserver1@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There is no hardware which can filter input on the duty cycle, so no
driver implements this. On top of that, LIRC_CAN_SET_REC_DUTY_CYCLE
has the same value as LIRC_CAN_MEASURE_CARRIER (0x02000000).
Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Merge tag 'br-v5.18l' of git://linuxtv.org/hverkuil/media_tree into media_stage
Tag branch
* tag 'br-v5.18l' of git://linuxtv.org/hverkuil/media_tree: (39 commits)
media: imx-jpeg: Set V4L2_BUF_FLAG_LAST at eos
media: meson-ir-tx: remove incorrect doc comment
media: vivid: use time_is_after_jiffies() instead of open coding it
media: wl128x: use time_is_before_jiffies() instead of open coding it
media: tda8083: use time_is_after_jiffies() instead of open coding it
media: stv0299: use time_is_before_jiffies() instead of open coding it
media: si21xx: use time_is_before_jiffies() instead of open coding it
media: cedrus: h264: Fix neighbour info buffer size
media: cx88-mpeg: clear interrupt status register before streaming video
media: cedrus: H265: Fix neighbour info buffer size
media: fsl-viu: use GFP_KERNEL
media: cx18: use GFP_KERNEL
drivers: meson: vdec: add VP9 support to GXM
stkwebcam: add new Asus laptop to upside_down table
media: imx-jpeg: fix a bug of accessing array out of bounds
media: sun6i-csi: fix colorspace in sun6i_video_try_fmt()
media: usb: go7007: s2250-board: fix leak in probe()
media: cedrus: Add watchdog for job completion
pixfmt-yuv-planar.rst: fix typo: 'Cr, Cr' -> 'Cr, Cb'
media: imx-jpeg: Remove unnecessary print function dev_err()
...
Dmitry Osipenko [Sun, 20 Feb 2022 20:46:20 +0000 (21:46 +0100)]
media: staging: tegra-vde: Bump BSEV DMA timeout
BSEV DMA timeouts if VDE is downclocked by x10. Bump the timeout to allow
DMA to complete. We don't support freq scaling yet, this is just a minor
improvement which may become useful sometime later.
Dmitry Osipenko [Sun, 20 Feb 2022 20:46:16 +0000 (21:46 +0100)]
media: v4l2-ctrls: Add new V4L2_H264_DECODE_PARAM_FLAG_P/BFRAME flags
Add new V4L2_H264_DECODE_PARAM_FLAG_P/BFRAME flags that are needed by
NVIDIA Tegra video decoder. Userspace will have to set these flags in
accordance to the type of a decoded frame.
Reviewed-by: Nicolas Dufresne <nicolas@collabora.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
ret is constant in imx8mq_mipi_csi_pm_suspend(). This function cannot
return error. Remove the return variable. Simplify other functions which
are using this function.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Colin Ian King [Sun, 23 Jan 2022 23:02:42 +0000 (00:02 +0100)]
media: dvb_frontends: make static read-only array fec_tab const
The static array fec_tab is read-only so it make sense to make
it const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Colin Ian King [Sun, 23 Jan 2022 22:56:27 +0000 (23:56 +0100)]
media: dib7000p: make static read-only arrays notch and sine const
The static arrays notch and sine are read-only so it make sense
to make them const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Colin Ian King [Sun, 23 Jan 2022 22:52:56 +0000 (23:52 +0100)]
media: dvb_frontend: make static read-only array DIB3000MC_I2C_ADDRESS const
The static array DIB3000MC_I2C_ADDRESS is read-only so it make sense
to make it const. Also add spaces to clean up checkpatch warnings.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
projects / thirdparty / kernel / linux.git / log
