RDMA/irdma: Add support for V2 HMC resource management scheme
HMC resource initialization is updated to support V1 or V2 approach
based on the FW capability. In the V2 approach, driver receives the
assigned HMC resources count and verifies if it will fit in the given
local memory. If it doesn't fit, the driver load fails.
Signed-off-by: Vinoth Kumar Chandra Mohan <vinoth.kumar.chandra.mohan@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Link: https://patch.msgid.link/20250827152545.2056-11-tatyana.e.nikolova@intel.com Tested-by: Jacob Moroni <jmoroni@google.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Shiraz Saleem [Wed, 27 Aug 2025 15:25:37 +0000 (10:25 -0500)]
RDMA/irdma: Add GEN3 virtual QP1 support
Add a new RDMA virtual channel op during QP1 creation that allow the
Control Plane (CP) to virtualize a regular QP as QP1 on non-default
RDMA capable vPorts. Additionally, the CP will return the Qsets to use
on the ib_device of the vPort.
Mustafa Ismail [Wed, 27 Aug 2025 15:25:36 +0000 (10:25 -0500)]
RDMA/irdma: Introduce GEN3 vPort driver support
In the IPU model, a function can host one or more logical network
endpoints called vPorts. Each vPort may be associated with either a
physical or an internal communication port, and can be RDMA capable. A
vPort features a netdev and, if RDMA capable, must have an associated
ib_dev.
This change introduces a GEN3 auxiliary vPort driver responsible for
registering a verbs device for every RDMA-capable vPort. Additionally,
the UAPI is updated to prevent the binding of GEN3 devices to older
user-space providers.
Plug into the unified HW statistics framework by adding a hardware
statistics map array for GEN3, defining the HW-specific width and
location for each counter in the statistics buffer.
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Link: https://patch.msgid.link/20250827152545.2056-7-tatyana.e.nikolova@intel.com Tested-by: Jacob Moroni <jmoroni@google.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Shiraz Saleem [Wed, 27 Aug 2025 15:25:34 +0000 (10:25 -0500)]
RDMA/irdma: Add GEN3 support for AEQ and CEQ
Extend support for GEN3 devices by programming the necessary hardware
IRQ registers and the updated descriptor fields for the Asynchronous
Event Queue (AEQ) and Completion Event Queue (CEQ). Introduce a RDMA
virtual channel operation with the Control Plane (CP) to associate
interrupt vectors appropriately with AEQ and CEQ. Add new Asynchronous
Event (AE) definitions specific to GEN3.
Additionally, refactor the AEQ and CEQ setup into the irdma_ctrl_init_hw
device control initialization routine.
This completes the PCI device level initialization for RDMA in the core
driver.
RDMA/irdma: Add GEN3 CQP support with deferred completions
GEN3 introduces asynchronous handling of Control QP (CQP) operations to
minimize head-of-line blocking. Create the CQP using the updated GEN3-
specific descriptor fields and implement the necessary support for this
deferred completion mechanism.
Signed-off-by: Krzysztof Czurylo <krzysztof.czurylo@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Link: https://patch.msgid.link/20250827152545.2056-5-tatyana.e.nikolova@intel.com Tested-by: Jacob Moroni <jmoroni@google.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
RDMA/irdma: Discover and set up GEN3 hardware register layout
Discover the hardware register layout for GEN3 devices through an RDMA
virtual channel operation with the Control Plane (CP). Set up the
corresponding hardware attributes specific to GEN3 devices.
Signed-off-by: Christopher Bednarz <christopher.n.bednarz@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Link: https://patch.msgid.link/20250827152545.2056-4-tatyana.e.nikolova@intel.com Tested-by: Jacob Moroni <jmoroni@google.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Mustafa Ismail [Wed, 27 Aug 2025 15:25:31 +0000 (10:25 -0500)]
RDMA/irdma: Add GEN3 core driver support
Introduce support for the GEN3 auxiliary core driver, which is
responsible for initializing PCI-level RDMA resources.
Facilitate host-driver communication with the device's Control Plane (CP)
to discover capabilities and perform privileged operations through an
RDMA-specific messaging interface built atop the IDPF mailbox and virtual
channel protocol.
Establish the RDMA virtual channel message interface and incorporate
operations to retrieve the hardware version and discover capabilities
from the CP.
Additionally, set up the RDMA MMIO regions and initialize the RF structure.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Co-developed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Link: https://patch.msgid.link/20250827152545.2056-3-tatyana.e.nikolova@intel.com Tested-by: Jacob Moroni <jmoroni@google.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Mustafa Ismail [Wed, 27 Aug 2025 15:25:30 +0000 (10:25 -0500)]
RDMA/irdma: Refactor GEN2 auxiliary driver
Refactor the irdma auxiliary driver and associated interfaces out of main.c
and into a standalone GEN2-specific source file and rename as gen_2 driver.
This is in preparation for adding GEN3 auxiliary drivers. Each HW
generation will have its own gen-specific interface file.
Additionally, move the Address Handle hash table and associated locks
under rf struct. This will allow GEN3 code to migrate to use it easily.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Co-developed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Link: https://patch.msgid.link/20250827152545.2056-2-tatyana.e.nikolova@intel.com Tested-by: Jacob Moroni <jmoroni@google.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
RDMA/cm: Rate limit destroy CM ID timeout error message
When the destroy CM ID timeout kicks in, you typically get a storm of
them which creates a log flooding. Hence, change pr_err() to
pr_err_ratelimited() in cm_destroy_id_wait_timeout().
RDMA/bnxt_re: Avoid GID level QoS update from the driver
The driver inserts a VLAN header into RoCE packets when the
traffic was untagged by modifying the existing GID entries.
This has caused the firmware to enforce only VLAN-based
priority mappings, ignoring other valid priority configurations
set via APP TLVs (e.g., DSCP selectors).
Driver now has support for selecting the service level (vlan id)
and traffic class (dscp) during modify_qp. So no need to override
the priority update using the update gid method. Hence removing
the code that handles the above operation.
RDMA/bnxt_re: Update sysfs entries with appropriate data
Updated the existing sysfs entries with correct data.
This change is to align the behavior with our OOB driver.
Added "board_id" sysfs entry which will provide the
VPD Part number, if exists.
net: ionic: Provide doorbell and CMB region information
The RDMA device needs information of controller memory bar and
doorbell capability to share with user context. Discover CMB regions
and express doorbell capabilities on device init.
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Co-developed-by: Pablo Cascón <pablo.cascon@amd.com> Signed-off-by: Pablo Cascón <pablo.cascon@amd.com> Co-developed-by: Allen Hubbe <allen.hubbe@amd.com> Signed-off-by: Allen Hubbe <allen.hubbe@amd.com> Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com> Link: https://patch.msgid.link/20250903061606.4139957-7-abhijit.gangurde@amd.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
net: ionic: Update LIF identity with additional RDMA capabilities
Firmware sends the RDMA capability in a response for LIF_IDENTIFY
device command. Update the LIF indentify with additional RDMA
capabilities used by driver and firmware.
net: ionic: Create an auxiliary device for rdma driver
To support RDMA capable ethernet device, create an auxiliary device in
the ionic Ethernet driver. The RDMA device is modeled as an auxiliary
device to the Ethernet device.
RDMA/bnxt_re: Call strscpy() with correct size argument
In bnxt_re_register_ib(), strscpy() is called with the length of the
source string rather than the size of the destination buffer.
This is fine as long as the destination buffer is larger than the source
string, but we should still use the destination buffer size instead to
call strscpy() as intended. And since 'node_desc' has a fixed size, we
can safely omit the size argument and let strscpy() infer it using
sizeof().
Qianfeng Rong [Tue, 26 Aug 2025 15:05:56 +0000 (23:05 +0800)]
RDMA/rdmavt: Use int type to store negative error codes
Change 'ret' from u32 to int in alloc_qpn() to store -EINVAL, and remove
the 'bail' label as it simply returns 'ret'.
Storing negative error codes in an u32 causes no runtime issues, but it's
ugly as pants, Change 'ret' from u32 to int type - this change has no
runtime impact.
Edward Srouji [Sun, 24 Aug 2025 14:48:39 +0000 (17:48 +0300)]
RDMA/mlx5: Fix page size bitmap calculation for KSM mode
When using KSM (Key Scatter-gather Memory) access mode, the HW requires
the IOVA to be aligned to the selected page size.
Without this alignment, the HW may not function correctly.
Currently, mlx5_umem_mkc_find_best_pgsz() does not filter out page sizes
that would result in misaligned IOVAs for KSM mode. This can lead to
selecting page sizes that are incompatible with the given IOVA.
Fix this by filtering the page size bitmap when in KSM mode, keeping
only page sizes to which the IOVA is aligned to.
Fixes: fcfb03597b7d ("RDMA/mlx5: Align mkc page size capability check to PRM") Signed-off-by: Edward Srouji <edwards@nvidia.com> Link: https://patch.msgid.link/20250824144839.154717-1-edwards@nvidia.com Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
RDMA/bnxt_re: Use firmware provided message timeout value
Before this patch, we used a hardcoded value of 500 msec as the default
value for L2 firmware message response timeout. With this commit,
the driver is using the firmware timeout value from the firmware.
As part of this change moved bnxt_re_query_hwrm_intf_version() to
bnxt_re_setup_chip_ctx() so that timeout value is queries before
sending first command.
RDMA/bnxt_re: Initialize fw with roce_mirror support
- Check FW capability for roce_mirror support.
- Initialize FW with roce_mirror support.
- When modifying QP, use unique GID for sgid incase of RawEth QP.
- Added support for create_flow and destroy_flow verbs. These
verbs are used on RawEth QP to add a specific flow action.
- To support TCP dump on RoCE, added IB_FLOW_ATTR_SNIFFER
attribute.
- In create_flow verb, driver allocates mirror_vnic and configure it
with RawEth QP. Once this is done, driver will enable mirroring.
- In destroy_flow, driver will disable mirroring and free the mirror
vnic.
- RawEth QP requires unique GID so that per function stats_ctx
is not polluted by packets mirrored to RoCE vnic.
- Added support to add unique GID when RawEth type QP is created.
- Added support to destroy unique GID when RawEth type QP is
destroyed.
- Allocated exclusive stats_ctx to use for RawEth type QP.
Moved the stats context allocation logic to a new function.
The stats context memory allocation code has been moved from
bnxt_qplib_alloc_hwctx() to the newly added bnxt_re_get_stats_ctx()
function. Also, the code to send the firmware command has been moved.
This patch is in preparation for other patches in this series.
There is no functional changes intended.
This patch is in preparation for other patches in this series.
There is no functional changes intended.
1. Rename bnxt_qplib_alloc_ctx() to bnxt_qplib_alloc_hwctx().
2. Rename bnxt_qplib_free_ctx() to bnxt_qplib_free_hwctx().
3. Reduce the number of arguments of bnxt_qplib_alloc_hwctx()
by moving a check outside of it.
When the firmware advertises that the device is capable of supporting
port mirroring on RoCE device, reserve one additional stat_ctx.
To support port mirroring feature, RDMA driver allocates one stat_ctx
for exclusive use in RawEth QP.
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com> Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20250822040801.776196-2-kalesh-anakkur.purayil@broadcom.com Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Leon Romanovsky <leon@kernel.org>
RDMA/bnxt_re: Report udp source port for flow_label in bnxt_re_query_qp
The firmware doesn't capture the flow_label. Therefore the value
that's always returned by qplib_qp->ah.flow_label is 0 whenever
a qp is created. And as per IB spec, udp source port can be reported
for flow_label. Hence reported udp source port for flow_label in
bnxt_re_query_qp by populating the value of qplib_qp->udp_sport
into qp_attr->ah_attr.grh.flow_label.
RDMA/bnxt_re: RoCE related hardware counters update
Support for new hardware counters added, and existing hardware
counters have been modified according to the design documents
for compatibility with open-source monitoring agents.
Signed-off-by: Vasuthevan Maheswaran <vasuthevan.maheswaran@broadcom.com> Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20250814112555.221665-7-kalesh-anakkur.purayil@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
RDMA/bnxt_re: Optimize bnxt_qplib_get_dev_attr function
Optimize bnxt_qplib_get_dev_attr() by separating out query_version which
uses creq notification method to host. Due to serialization of cmdq by
firmware, expected latency in response to heavy multi-threaded rdma
applications might be observed.
This patch separates the version_query logic out of device attribute
query and called only during rdma driver init.
Chenna Arnoori [Thu, 14 Aug 2025 11:25:49 +0000 (16:55 +0530)]
RDMA/bnxt_re: RoCE Driver Dynamic Debug for HWRM's
Add Linux kernel dynamic debug prints to ROCE HWRM's.
Dumping request and response buffers for the ROCE HWRM's using
print_hex_dump_bytes() to be part of kernel dynmic debug.
Qianfeng Rong [Thu, 21 Aug 2025 07:22:09 +0000 (15:22 +0800)]
RDMA/erdma: Use vcalloc() instead of vzalloc()
Replace vzalloc() with vcalloc() in vmalloc_to_dma_addrs(). As noted in
the kernel documentation [1], open-coded multiplication in allocator
arguments is discouraged because it can lead to integer overflow.
Use vcalloc() to gain built-in overflow protection, making memory
allocation safer when calculating allocation size compared to explicit
multiplication.
RDMA/mlx5: Fix vport loopback forcing for MPV device
Previously loopback for MPV was supposed to be permanently enabled,
however other driver flows were able to over-ride that configuration and
disable it.
Add force_lb parameter that indicates that loopback should always be
enabled which prevents all other driver flows from disabling it.
However, this value represents the number of WQEs in units of Basic
Blocks (see MLX5_SEND_WQE_BB), not actual number of WQEs. Since the size
of a WQE can vary depending on transport type and features (e.g., atomic
operations, UMR, LSO), the actual number of WQEs can be significantly
smaller than the WQEBB count suggests.
This patch introduces a conservative estimation of the worst-case WQE size
— considering largest segments possible with 1 SGE and no inline data or
special features. It uses this to derive a more accurate max_qp_wr value.
Fixes: 938fe83c8dcb ("net/mlx5_core: New device capabilities handling") Link: https://patch.msgid.link/r/7d992c9831c997ed5c33d30973406dc2dcaf5e89.1755088725.git.leon@kernel.org Reported-by: Chuck Lever <cel@kernel.org> Closes: https://lore.kernel.org/all/20250506142202.GJ2260621@ziepe.ca/ Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rare servicing scenarios, the hardware may delete the
state of the GSI QP, preventing it from generating CQEs
for pending send WRs. Since WRs submitted to the GSI QP
hold CM resources, the device cannot be removed until
those WRs are completed. This patch marks all pending
send WRs as failed, allowing the GSI QP to release the CM
resources and enabling safe device removal.
Boshi Yu [Fri, 25 Jul 2025 05:53:54 +0000 (13:53 +0800)]
RDMA/erdma: Use dma_map_page to map scatter MTT buffer
Each high-level indirect MTT entry is assumed to point to exactly one page
of the low-level MTT buffer, but dma_map_sg may merge contiguous physical
pages when mapping. To avoid extra overhead from splitting merged regions,
use dma_map_page to map the scatter MTT buffer page by page.
Mark Zhang [Mon, 30 Jun 2025 10:52:35 +0000 (13:52 +0300)]
RDMA/ucma: Support write an event into a CM
Enable user-space to inject an event into a CM through it's event
channel. Two new events are added and supported: RDMA_CM_EVENT_USER and
RDMA_CM_EVENT_INTERNAL. With these 2 events a new event parameter "arg"
is supported, which is passed from sender to receiver transparently.
With this feature an application is able to write an event into a CM
channel with a new user-space rdmacm API. For example thread T1 could
write an event with the API:
rdma_write_cm_event(cm_id, RDMA_CM_EVENT_USER, status, arg);
and thread T2 could receive the event with rdma_get_cm_event().
Mark Zhang [Mon, 30 Jun 2025 10:52:33 +0000 (13:52 +0300)]
RDMA/cma: Support IB service record resolution
Add new UCMA command and the corresponding CMA implementation. Userspace
can send this command to request service resolution based on service
name or ID.
On a successful resolution, one or multiple service records are
returned, the first one will be used as destination address by default.
Two new CM events are added and returned to caller accordingly:
- RDMA_CM_EVENT_ADDRINFO_RESOLVED: Resolve succeeded;
- RDMA_CM_EVENT_ADDRINFO_ERROR: Resolve failed.
Internally two new CM states are added:
- RDMA_CM_ADDRINFO_QUERY: CM is in the process of IB service
resolution;
- RDMA_CM_ADDRINFO_RESOLVED: CM has finished the resolve process.
With these new states, beside existing state transfer processes, 2 new
processes are supported:
1. The default address is used:
RDMA_CM_ADDR_BOUND ->
RDMA_CM_ADDRINFO_QUERY ->
RDMA_CM_ADDRINFO_RESOLVED ->
RDMA_CM_ROUTE_QUERY
2. To use a different address:
RDMA_CM_ADDR_BOUND ->
RDMA_CM_ADDRINFO_QUERY->
RDMA_CM_ADDRINFO_RESOLVED ->
RDMA_CM_ADDR_QUERY ->
RDMA_CM_ADDR_RESOLVED ->
RDMA_CM_ROUTE_QUERY
In the 2nd case, resolve_addrinfo returns multiple records, a user
could call rdma_resolve_addr() with the one that is not the first.
Mark Zhang [Mon, 30 Jun 2025 10:52:32 +0000 (13:52 +0300)]
RDMA/sa_query: Support IB service records resolution
Add an SA query API ib_sa_service_rec_get() to support building and
sending SA query MADs that ask for service records with a specific
name or ID, and receiving and parsing responses from the SM.
Linus Torvalds [Sun, 10 Aug 2025 05:51:37 +0000 (08:51 +0300)]
Merge tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp fixes from Borislav Petkov:
- Remove an obsolete comment and fix spelling
* tag 'smp_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Remove obsolete comment from takedown_cpu()
smp: Fix spelling in on_each_cpu_cond_mask()'s doc-comment
Linus Torvalds [Sun, 10 Aug 2025 05:46:47 +0000 (08:46 +0300)]
Merge tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a wrong ioremap size in mvebu-gicp
- Remove yet another compile-test case for a driver which needs an
additional dependency
- Fix a lock inversion scenario in the IRQ unit test suite
- Remove an impossible flag situation in gic-v5
- Do not iounmap resources in gic-v5 which are managed by devm
- Make sure stale, left-over interrupts in mvebu-gicp are cleared on
driver init
- Fix a reference counting mishap in msi-lib
- Fix a dereference-before-null-ptr-check case in the riscv-imsic
irqchip driver
* tag 'irq_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mvebu-gicp: Use resource_size() for ioremap()
irqchip: Build IMX_MU_MSI only on ARM
genirq/test: Resolve irq lock inversion warnings
irqchip/gic-v5: Remove IRQD_RESEND_WHEN_IN_PROGRESS for ITS IRQs
irqchip/gic-v5: iwb: Fix iounmap probe failure path
irqchip/mvebu-gicp: Clear pending interrupts on init
irqchip/msi-lib: Fix fwnode refcount in msi_lib_irq_domain_select()
irqchip/riscv-imsic: Don't dereference before NULL pointer check
Linus Torvalds [Sun, 10 Aug 2025 05:15:32 +0000 (08:15 +0300)]
Merge tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix an interrupt vector setup race which leads to a non-functioning
device
- Add new Intel CPU models *and* a family: 0x12. Finally. Yippie! :-)
* tag 'x86_urgent_for_v6.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Plug vector setup race
x86/cpu: Add new Intel CPU model numbers for Wildcatlake and Novalake
Len Brown [Sun, 10 Aug 2025 01:08:26 +0000 (21:08 -0400)]
tools/power turbostat: version 2025.09.09
Probe and display L3 Cache topology
Add ability to average an added counter
(useful for pre-integrated "counters", such as Watts)
Break the limit of 64 built-in counters.
Assorted bug fixes and minor feature tweaks
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/
may be readable by all, but
/sys/devices/system/cpu/intel_uncore_frequency/package_X_die_Y/current_freq_khz
may be readable only by root.
Non-root turbostat users see complaints in this scenario.
Fail probe of the interface if we can't read current_freq_khz.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Original-patch-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Wed, 11 Jun 2025 06:50:26 +0000 (14:50 +0800)]
tools/power turbostat: Fix DMR support
Together with the RAPL MSRs, there are more MSRs gone on DMR, including
PLR (Perf Limit Reasons), and IRTL (Package cstate Interrupt Response
Time Limit) MSRs. The configurable TDP info should also be retrieved
from TPMI based Intel Speed Select Technology feature.
Remove the access of these MSRs for DMR. Improve the DMR platform
feature table to make it more readable at the same time.
Fixes: 83075bd59de2 ("tools/power turbostat: Add initial support for DMR") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
tools/power turbostat: add format "average" for external attributes
External atributes with format "raw" are not printed in summary lines
for nodes/packages (or with option -S). The new format "average"
behaves like "raw" but also adds the summary data
Signed-off-by: Michael Hebenstreit <michael.hebenstreit@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sat, 12 Jul 2025 20:16:56 +0000 (16:16 -0400)]
tools/power turbostat: Support more than 64 built-in-counters
We have out-grown the ability to use a 64-bit memory location
to inventory every possible built-in counter.
Leverage the the CPU_SET(3) macros to break this barrier.
Also, break the Joules & Watts counters into two,
since we can no longer 'or' them together...
Linus Torvalds [Sat, 9 Aug 2025 15:12:23 +0000 (18:12 +0300)]
Merge tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull TTY fix from Greg KH:
"Here is a single revert of one of the previous patches that went in
the last tty/serial merge that is breaking userspace on some platforms
(specifically powerpc, probably a few others.)
It accidentially changed the ioctl values of some tty ioctls, which
breaks xorg.
The revert has been in linux-next all this week with no reported
issues"
* tag 'tty-6.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: vt: use _IO() to define ioctl numbers"
Linus Torvalds [Sat, 9 Aug 2025 05:47:28 +0000 (08:47 +0300)]
Merge tag 'block-6.17-20250808' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Yu:
- mddev null-ptr-dereference fix, by Erkun
- md-cluster fail to remove the faulty disk regression fix, by
Heming
- minor cleanup, by Li Nan and Jinchao
- mdadm lifetime regression fix reported by syzkaller, by Yu Kuai
- MD pull request via Christoph
- add support for getting the FDP featuee in fabrics passthru path
(Nitesh Shetty)
- add capability to connect to an administrative controller
(Kamaljit Singh)
- fix a leak on sgl setup error (Keith Busch)
- initialize discovery subsys after debugfs is initialized
(Mohamed Khalfella)
- fix various comment typos (Bjorn Helgaas)
- remove unneeded semicolons (Jiapeng Chong)
- nvmet debugfs ordering issue fix
- Fix UAF in the tag_set in zloop
- Ensure sbitmap shallow depth covers entire set
- Reduce lock roundtrips in io context lookup
- Move scheduler tags alloc/free out of elevator and freeze lock, to
fix some lockdep found issues
- Improve robustness of queue limits checking
- Fix a regression with IO priorities, if no io context exists
* tag 'block-6.17-20250808' of git://git.kernel.dk/linux: (26 commits)
lib/sbitmap: make sbitmap_get_shallow() internal
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
nvmet: exit debugfs after discovery subsystem exits
block, bfq: Reorder struct bfq_iocq_bfqq_data
md: make rdev_addable usable for rcu mode
md/raid1: remove struct pool_info and related code
md/raid1: change r1conf->r1bio_pool to a pointer type
block: ensure discard_granularity is zero when discard is not supported
zloop: fix KASAN use-after-free of tag set
block: Fix default IO priority if there is no IO context
nvme: fix various comment typos
nvme-auth: remove unneeded semicolon
nvme-pci: fix leak on sgl setup error
nvmet: initialize discovery subsys after debugfs is initialized
nvme: add capability to connect to an administrative controller
nvmet: add support for FDP in fabrics passthru path
md: rename recovery_cp to resync_offset
md/md-cluster: handle REMOVE message earlier
md: fix create on open mddev lifetime regression
block: fix potential deadlock while running nr_hw_queue update
...
Linus Torvalds [Sat, 9 Aug 2025 05:45:08 +0000 (08:45 +0300)]
Merge tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Allow vectorized payloads for send/send-zc - like sendmsg, but
without the hassle of a msghdr.
- Fix for an integer wrap that should go to stable, spotted by syzbot.
Nothing alarming here, as you need to be root to hit this.
Nevertheless, it should get fixed.
FWIW, kudos to the syzbot crew for having much nicer reproducers now,
and with nicely annotated source code as well. This is particularly
useful as syzbot uses the raw interface rather than liburing,
historically it's been difficult to turn a syzbot reproducer into a
meaningful test case. With the recent changes, not true anymore!
* tag 'io_uring-6.17-20250808' of git://git.kernel.dk/linux:
io_uring/memmap: cast nr_pages to size_t before shifting
io_uring/net: Allow to do vectorized send
Linus Torvalds [Sat, 9 Aug 2025 05:43:24 +0000 (08:43 +0300)]
Merge tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's one fix here for an issue with the CS42L43 where we were
allocating a single property for client devices as just that property
rather than a terminated array of properties like we are supposed to.
We also have an update to the MAINTAINERS file for some Renesas
devices"
* tag 'spi-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cs42l43: Property entry should be a null-terminated array
MAINTAINERS: Add entries for the RZ/V2H(P) RSPI
Linus Torvalds [Sat, 9 Aug 2025 05:41:53 +0000 (08:41 +0300)]
Merge tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"This fixes an issue with the newly added code for handling large
voltage changes on regulators which require that individual voltage
changes cover a limited range, the check for convergence was broken"
* tag 'regulator-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: correct convergence check in regulator_set_voltage()
Linus Torvalds [Sat, 9 Aug 2025 05:40:28 +0000 (08:40 +0300)]
Merge tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"These patches fix a lockdep issue Russell King reported with nested
regmap-irqs (unusual since regmap is generally for devices on slow
buses so devices don't get nested), plus add a missing mutex free
which I noticed while implementing a fix for that issue"
* tag 'regmap-fix-v6.17-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Avoid lockdep warnings with nested regmap-irq chips
regmap: irq: Free the regmap-irq mutex
Linus Torvalds [Sat, 9 Aug 2025 05:37:17 +0000 (08:37 +0300)]
Merge tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- aspeed: add driver and bindings for ast2700
- broadcom: add driver and bindings for bcm74110
- mediatek: fix RPM api usage
- qcom: use dev_fwnode
- pcc: support shared buffer
- misc dt-bindings cleanup
* tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox/pcc: support mailbox management of the shared buffer
mailbox: bcm74110: Fix spelling mistake
mailbox: bcm74110: remove unneeded semicolon
mailbox: aspeed: add mailbox driver for AST27XX series SoC
dt-bindings: mailbox: Add ASPEED AST2700 series SoC
dt-bindings: mailbox: Drop consumers example DTS
dt-bindings: mailbox: nvidia,tegra186-hsp: Use generic node name
dt-bindings: mailbox: Correct example indentation
dt-bindings: mailbox: ti,secure-proxy: Add missing reg maxItems
dt-bindings: mailbox: amlogic,meson-gxbb-mhu: Add missing interrupts maxItems
dt-bindings: mailbox: qcom-ipcc: document the Milos Inter-Processor Communication Controller
mailbox: Add support for bcm74110
dt-bindings: mailbox: Add support for bcm74110
mailbox: Use dev_fwnode()
mailbox: mtk-cmdq: Switch to pm_runtime_put_autosuspend()
Linus Torvalds [Sat, 9 Aug 2025 05:15:43 +0000 (08:15 +0300)]
Merge tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"As discussed: there's a small commit that removes the legacy GPIO line
value setter callbacks as they're no longer used and a big, treewide
commit that renames the new ones to the old names across all GPIO
drivers at once.
While at it: there are also two fixes that I picked up over the course
of the merge window:
- remove unused, legacy GPIO line value setters from struct gpio_chip
- rename the new set callbacks back to the original names treewide
- fix interrupt handling in gpio-mlxbf2
- revert a buggy immutable irqchip conversion"
* tag 'gpio-updates-for-v6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
treewide: rename GPIO set callbacks back to their original names
gpio: remove legacy GPIO line value setter callbacks
gpio: mlxbf2: use platform_get_irq_optional()
Revert "gpio: pxa: Make irq_chip immutable"
Linus Torvalds [Sat, 9 Aug 2025 05:12:41 +0000 (08:12 +0300)]
Merge tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
- Support for ASoC AMD ACP 7.2 with new IDs
- ASoC Intel AVS and SOF fixes
- Yet more kconfig adjustments for HD-audio codecs
- TAS2781 codec fixes
- Fixes for longstanding (rather minor) bugs in Intel LPE audio and
USB-audio drivers
* tag 'sound-fix-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/cirrus: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/hdmi: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/realtek: Restrict prompt only for CONFIG_EXPERT
ALSA: hda/ca0132: Fix missing error handling in ca0132_alt_select_out()
ASoC: SOF: Intel: hda-sdw-bpt: fix SND_SOF_SOF_HDA_SDW_BPT dependencies
ALSA: hda/tas2781: Support L"SmartAmpCalibrationData" to save calibrated data
ALSA: intel_hdmi: Fix off-by-one error in __hdmi_lpe_audio_probe()
ALSA: hda/realtek: add LG gram 16Z90R-A to alc269 fixup table
ALSA: usb-audio: Don't use printk_ratelimit for debug prints
ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCC SKU
ASoC: tas2781: Fix the wrong step for TLV on tas2781
ASoC: amd: acp: Add SoundWire SOF machine driver support for acp7.2 platform
ASoC: amd: acp: Add SoundWire legacy machine driver support for acp7.2 platform
ASoC: amd: ps: Add SoundWire pci and dma driver support for acp7.2 platform
ASoC: SOF: amd: Add sof audio support for acp7.2 platform
ASoC: Intel: avs: Fix uninitialized pointer error in probe()
ASoC: wm8962: Clear master mode when enter runtime suspend
ASoC: SOF: amd: acp-loader: Use GFP_KERNEL for DMA allocations in resume context
Linus Torvalds [Sat, 9 Aug 2025 04:58:55 +0000 (07:58 +0300)]
Merge tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are a few patches to fix up bits that went missing during the
merge window: The tegra and s3c patches address trivial regressions
from conflicts, the bcm7445 makes the dt conform to the binding that
was made stricter"
* tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: tegra: Remove numa-node-id properties
ARM: s3c/gpio: complete the conversion to new GPIO value setters
ARM: dts: broadcom: Fix bcm7445 memory controller compatible
Linus Torvalds [Sat, 9 Aug 2025 04:35:03 +0000 (07:35 +0300)]
Merge tag 'xtensa-20250808' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa update from Max Filippov:
- replace __ASSEMBLY__ with __ASSEMBLER__ in arch headers
* tag 'xtensa-20250808' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
xtensa: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
Linus Torvalds [Sat, 9 Aug 2025 04:26:19 +0000 (07:26 +0300)]
Merge tag 'v6.17-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression that broke hmac(sha3-224-s390)"
* tag 'v6.17-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hash - Increase HASH_MAX_DESCSIZE for hmac(sha3-224-s390)
Linus Torvalds [Sat, 9 Aug 2025 04:20:44 +0000 (07:20 +0300)]
Merge tag 'nfs-for-6.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- don't inherit NFS filesystem capabilities when crossing from one
filesystem to another
Bugfixes:
- NFS wakeup of __nfs_lookup_revalidate() needs memory barriers
- NFS improve bounds checking in nfs_fh_to_dentry()
- NFS Fix allocation errors when writing to a NFS file backed
loopback device
- NFSv4: More listxattr fixes
- SUNRPC: fix client handling of TLS alerts
- pNFS block/scsi layout fix for an uninitialised pointer
dereference
- pNFS block/scsi layout fixes for the extent encoding, stripe
mapping, and disk offset overflows
- pNFS layoutcommit work around for RPC size limitations
- pNFS/flexfiles avoid looping when handling fatal errors after
layoutget
- localio: fix various race conditions
Features and cleanups:
- Add NFSv4 support for retrieving the btime
- NFS: Allow folio migration for the case of mode == MIGRATE_SYNC
- NFS: Support using a kernel keyring to store TLS certificates
- NFSv4: Speed up delegation lookup using a hash table
- Assorted cleanups to remove unused variables and struct fields
- Assorted new tracepoints to improve debugging"
* tag 'nfs-for-6.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (44 commits)
NFS/localio: nfs_uuid_put() fix the wake up after unlinking the file
NFS/localio: nfs_uuid_put() fix races with nfs_open/close_local_fh()
NFS/localio: nfs_close_local_fh() fix check for file closed
NFSv4: Remove duplicate lookups, capability probes and fsinfo calls
NFS: Fix the setting of capabilities when automounting a new filesystem
sunrpc: fix client side handling of tls alerts
nfs/localio: use read_seqbegin() rather than read_seqbegin_or_lock()
NFS: Fixup allocation flags for nfsiod's __GFP_NORETRY
NFSv4.2: another fix for listxattr
NFS: Fix filehandle bounds checking in nfs_fh_to_dentry()
SUNRPC: Silence warnings about parameters not being described
NFS: Clean up pnfs_put_layout_hdr()/pnfs_destroy_layout_final()
NFS: Fix wakeup of __nfs_lookup_revalidate() in unblock_revalidate()
NFS: use a hash table for delegation lookup
NFS: track active delegations per-server
NFS: move the delegation_watermark module parameter
NFS: cleanup nfs_inode_reclaim_delegation
NFS: cleanup error handling in nfs4_server_common_setup
pNFS/flexfiles: don't attempt pnfs on fatal DS errors
NFS: drop __exit from nfs_exit_keyring
...
Linus Torvalds [Sat, 9 Aug 2025 04:12:43 +0000 (07:12 +0300)]
Merge tag 'v6.17rc-part2-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
"Non-smbdirect:
- Fix null ptr deref caused by delay in global spinlock
initialization
- Two fixes for native symlink creation with SMB3.1.1 POSIX
Extensions
- Fix for socket special file creation with SMB3.1.1 POSIX Exensions
- Reduce lock contention by splitting out mid_counter_lock
- move SMB1 transport code to separate file to reduce module size
when support for legacy servers is disabled
- Two cleanup patches: rename mid_lock to make it clearer what it
protects and one to convert mid flags to bool to make clearer
Smbdirect/RDMA restructuring and fixes:
- Fix for error handling in send done
- Remove unneeded empty packet queue
- Fix put_receive_buffer error path
- Two fixes to recv_done error paths
- Remove unused variable
- Improve response and recvmsg type handling
- Fix handling of incoming message type
- Two cleanup fixes for better handling smbdirect recv io
- Two cleanup fixes for socket spinlock
- Two patches that add socket reassembly struct
- Remove unused connection_status enum
- Use flag in common header for SMBDIRECT_RECV_IO_MAX_SGE
- Two cleanup patches to introduce and use smbdirect send io
- Two cleanup patches to introduce and use smbdirect send_io struct
- Fix to return error if rdma connect takes longer than 5 seconds
- Error logging improvements
- Fix redundand call to init_waitqueue_head
- Remove unneeded wait queue"
* tag 'v6.17rc-part2-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (33 commits)
smb: client: only use a single wait_queue to monitor smbdirect connection status
smb: client: don't call init_waitqueue_head(&info->conn_wait) twice in _smbd_get_connection
smb: client: improve logging in smbd_conn_upcall()
smb: client: return an error if rdma_connect does not return within 5 seconds
smb: client: make use of smbdirect_socket.{send,recv}_io.mem.{cache,pool}
smb: smbdirect: add smbdirect_socket.{send,recv}_io.mem.{cache,pool}
smb: client: make use of struct smbdirect_send_io
smb: smbdirect: introduce struct smbdirect_send_io
smb: client: make use of SMBDIRECT_RECV_IO_MAX_SGE
smb: smbdirect: add SMBDIRECT_RECV_IO_MAX_SGE
smb: client: remove unused enum smbd_connection_status
smb: client: make use of smbdirect_socket.recv_io.reassembly.*
smb: smbdirect: introduce smbdirect_socket.recv_io.reassembly.*
smb: client: make use of smb: smbdirect_socket.recv_io.free.{list,lock}
smb: smbdirect: introduce smbdirect_socket.recv_io.free.{list,lock}
smb: client: make use of struct smbdirect_recv_io
smb: smbdirect: introduce struct smbdirect_recv_io
smb: client: make use of smbdirect_socket->recv_io.expected
smb: smbdirect: introduce smbdirect_socket.recv_io.expected
smb: client: remove unused smbd_connection->fragment_reassembly_remaining
...
Linus Torvalds [Sat, 9 Aug 2025 03:52:37 +0000 (06:52 +0300)]
Merge tag 'v6.17rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix limiting repeated connections from same IP
- Fix for extracting shortname when name begins with a dot
- Four smbdirect fixes:
- three fixes to the receive path: potential unmap bug, potential
resource leaks and stale connections, and also potential use
after free race
- cleanup to remove unneeded queue
* tag 'v6.17rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
smb: server: Fix extension string in ksmbd_extract_shortname()
ksmbd: limit repeated connections from clients with the same IP
smb: server: let recv_done() avoid touching data_transfer after cleanup/move
smb: server: let recv_done() consistently call put_recvmsg/smb_direct_disconnect_rdma_connection
smb: server: make sure we call ib_dma_unmap_single() only if we called ib_dma_map_single already
smb: server: remove separate empty_recvmsg_queue
Zhang Rui [Tue, 17 Jun 2025 12:48:59 +0000 (20:48 +0800)]
tools/power turbostat: Fix bogus SysWatt for forked program
Similar to delta_cpu(), delta_platform() is called in turbostat main
loop. This ensures accurate SysWatt readings in periodic monitoring mode
$ sudo turbostat -S -q --show power -i 1
CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt
60 61 6.21 1.13 0.16 0.00 0.00 0.00 13.07
58 61 6.00 1.07 0.18 0.00 0.00 0.00 12.75
58 61 5.74 1.05 0.17 0.00 0.00 0.00 12.22
58 60 6.27 1.11 0.24 0.00 0.00 0.00 13.55
However, delta_platform() is missing for forked program and causes bogus
SysWatt reporting,
$ sudo turbostat -S -q --show power sleep 1
1.004736 sec
CoreTmp PkgTmp PkgWatt CorWatt GFXWatt RAMWatt PKG_% RAM_% SysWatt
57 58 6.05 1.02 0.16 0.00 0.00 0.00 0.03
Add missing delta_platform() for forked program.
Fixes: e5f687b89bc2 ("tools/power turbostat: Add RAPL psys as a built-in counter") Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Kernels configured with CONFIG_MULTIUSER=n have no cap_get_proc().
Check for ENOSYS to recognize this case, and continue on to
attempt to access the requested MSRs (such as temperature).
Signed-off-by: Calvin Owens <calvin@wbinvd.org> Signed-off-by: Len Brown <len.brown@intel.com>
Calvin Owens [Fri, 13 Jun 2025 16:54:23 +0000 (09:54 -0700)]
tools/power turbostat: Fix build with musl
turbostat.c: In function 'parse_int_file':
turbostat.c:5567:19: error: 'PATH_MAX' undeclared (first use in this function)
5567 | char path[PATH_MAX];
| ^~~~~~~~
turbostat.c: In function 'probe_graphics':
turbostat.c:6787:19: error: 'PATH_MAX' undeclared (first use in this function)
6787 | char path[PATH_MAX];
| ^~~~~~~~
Signed-off-by: Calvin Owens <calvin@wbinvd.org> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
projects / thirdparty / kernel / stable.git / log
