Rasmus Villemoes [Tue, 21 Aug 2018 08:49:15 +0000 (10:49 +0200)]
libgcc: add crt{begin,end} for powerpc-wrs-vxworks target
In order to allow ZCX on VxWorks, we need the frame_dummy function to do
the register_frame_info(). So make sure crtbegin.o and crtend.o are
available for use with a custom spec file.
Rasmus Villemoes [Tue, 21 Aug 2018 08:47:41 +0000 (10:47 +0200)]
vxworks: add target/h/wrn/coreip to the set of system include paths
In order to build crtstuff.c, I need to ensure the headers in
target/h/wrn/coreip are also searched. Of course, that can be done
similar to how wrn/coreip gets manually added for libgcc, e.g. by adding
But without target/h/wrn/coreip in the default search path, all
user-code that include <unistd.h> (crtstuff.c just being one such
example) will have to manually add an -isystem
flag adding the wrn/coreip directory: unistd.h include ioLib.h, which
has
#include "net/uio.h"
and that header is found in target/h/wrn/coreip. In other words, the
VxWorks system headers (at least for VxWorks 5.5) are written in a way
that assumes wrn/coreip is in the search path, so I think it makes sense
to have that by default.
It will change the search order for existing setups that pass
-I.../target/h/wrn/coreip (without -nostdinc), since that flag will now
be ignored. I can't know whether that will break anything, but I do
believe it makes sense to have the defaults actually usable without
expecting all invocations to add -I/-isystem flags.
Tom de Vries [Tue, 21 Aug 2018 07:39:29 +0000 (07:39 +0000)]
[debug] Add debug and earlydebug dumps
With the introduction of early debug, we've added a phase in the compiler which
produces information which is not visible, unless we run the compiler in the
debugger and call debug_dwarf from dwarf2out_early_finish or some such.
This patch adds dumping of "early" and "final" debug info, into .earlydebug
and .debug dump files, enabled by -fdump-earlydebug and -fdumpdebug, such that
we can follow f.i. the upper bound of a vla type from early debug:
...
DW_AT_upper_bound: location descriptor:
(0x7f0d645b7550) DW_OP_GNU_variable_value , 0
...
to final debug:
...
DW_AT_upper_bound: location descriptor:
(0x7f0d645b7550) DW_OP_fbreg 18446744073709551592, 0
(0x7f0d645b7a00) DW_OP_deref 8, 0
...
to -dA annotated assembly file:
...
.uleb128 0x3 # DW_AT_upper_bound
.byte 0x91 # DW_OP_fbreg
.sleb128 -24
.byte 0x6 # DW_OP_deref
...
The .debug file shows the same information as the annotated assembly, but in
the same format as the "early" debug info.
Michael Meissner [Mon, 20 Aug 2018 23:46:37 +0000 (23:46 +0000)]
re PR target/87033 (The compiler does not generate the LWAX instruction)
[gcc]
2018-08-20 Michael Meissner <meissner@linux.ibm.com>
PR target/87033
* config/rs6000/rs6000.md (extendsi<mode>2): Change constraints
from 'Y' to 'YZ' to enable the LWAX instruction to be generated
for indexed loads.
[gcc/testsuite]
2018-08-20 Michael Meissner <meissner@linux.ibm.com>
PR target/87033
* gcc.target/powerpc/pr87033.c: New test.
David Malcolm [Mon, 20 Aug 2018 21:06:46 +0000 (21:06 +0000)]
Add support for grouping of related diagnostics (PR other/84889)
We often emit logically-related groups of diagnostics.
A relatively simple case is this:
if (warning_at (body_loc, OPT_Wmultistatement_macros,
"macro expands to multiple statements"))
inform (guard_loc, "some parts of macro expansion are not guarded by "
"this %qs clause", guard_tinfo_to_string (keyword));
where the "note" diagnostic issued by the "inform" call
is guarded by the -Wmultistatement_macros warning.
More complicated examples can be seen in the C++ frontend,
where e.g. print_z_candidates can lead to numerous "note"
diagnostics being emitted.
I'm looking at various ways to improve how we handle such related
diagnostics, but, prior to this patch, there was no explicit
relationship between these diagnostics: the diagnostics subsystem
had no way of "knowing" that these were related.
This patch introduces a simple way to group the diagnostics:
an auto_diagnostic_group class: all diagnostics emitted within
the lifetime of an auto_diagnostic_group instance are logically
grouped.
Hence in the above example, the two diagnostics can be grouped
by simply adding an auto_diagnostic_group instance:
auto_diagnostic_group d;
if (warning_at (body_loc, OPT_Wmultistatement_macros,
"macro expands to multiple statements"))
inform (guard_loc, "some parts of macro expansion are not guarded by "
"this %qs clause", guard_tinfo_to_string (keyword));
Some more awkard cases are of the form:
if (some_condition
&& warning_at (...)
&& more_conditions)
inform (...);
which thus need restructuring to:
if (some_condition)
{
auto_diagnostic_group d;
warning_at (...);
if (more_conditions)
inform (...);
}
so that the lifetime of the auto_diagnostic_group groups the
warning_at and the inform call.
Nesting is handled by simply tracking a nesting depth within the
diagnostic_context.: all diagnostics are treated as grouped until the
final auto_diagnostic_group is popped.
diagnostic.c uses this internally, so that all diagnostics are part of
a group - those that are "by themselves" are treated as being part of
a group with one element.
The diagnostic_context gains optional callbacks for displaying the
start of a group (when the first diagnostic is emitted within it), and
the end of a group (for when the group was non-empty); these callbacks
are unused by default, but a test plugin demonstrates them (and verifies
that the machinery is working).
As noted above, I'm looking at various ways to use the grouping to
improve how we output the diagnostics.
FWIW, I experimented with a more involved implementation, of the form:
diagnostic_group d;
if (d.warning_at (body_loc, OPT_Wmultistatement_macros,
"macro expands to multiple statements"))
d.inform (guard_loc, "some parts of macro expansion are not guarded by "
"this %qs clause", guard_tinfo_to_string (keyword));
which had the advantage of allowing auto-detection of the places where
groups were needed (by converting ::warning_at's return type to bool),
but it was a much more invasive patch, especially when dealing with
the places in the C++ frontend that can emit numerous notes after
an error or warning (and thus having to pass the group around)
Hence I went with this simpler approach.
gcc/testsuite/ChangeLog:
PR other/84889
* gcc.dg/plugin/diagnostic-group-test-1.c: New test.
* gcc.dg/plugin/diagnostic_group_plugin.c: New test.
* gcc.dg/plugin/plugin.exp (plugin_test_list): Add the new tests.
Nathan Sidwell [Mon, 20 Aug 2018 16:32:29 +0000 (16:32 +0000)]
[CPP PATCH] node type
https://gcc.gnu.org/ml/gcc-patches/2018-08/msg01164.html
* include/cpplib.h (NODE_BUILTIN, NODE_MACRO_ARG): Delete.
Renumber others.
(enum node_type): Replace NT_MACRO with NT_USER_MACRO,
NT_BUILTIN_MACRO, NT_MACRO_ARG. Delete NT_ASSERTION.
(NTV_MACRO, NTV_ANSWER, NTV_BUILTIN, NTV_ARGUMENT, NTV_NONE):
Delete.
(CPP_HASHNODE_VALUE_IDX): Delete.
(union _cpp_hashnode_value): GTY tag from enum node_type directly.
(struct cpp_hashnode): Adjust GTY desc for value field.
(cpp_user_macro_p, cpp_builtin_macro_p, cpp_macro_p): Adjust.
* directives.c (undefine_macros): Clear value.anwers, adjust flag
clearing.
(_cpp_test_assertion): No need to check NT_ASSERTION.
(do_assert, do_unassert): Likewise.
* init.c (cpp_init_special_builtins): Set type not flags.
* macro.c (struct macro_arg_saved_data): Add type field.
(cpp_get_token_1): Check type not NT_VOID.
(_cpp_free_definition): Adjust flag clearing. Nullify
value.answers.
(_cpp_save_parameter, _cpp_unsave_parameters): Save and restore
type.
(lex_expansion_token): Check type not flags.
(_cpp_create_definition): Set type to NT_USER_MACRO.
(_cpp_notify_macro_use): Adjust type checking.
* pch.c (write_macdef, count_defs, write_defs, cpp_valid_state)
(save_macros): Adjust node type/flag handling.
* traditional.c (_cpp_scan_out_logical_line): Check type not flags.
Bernd Edlinger [Mon, 20 Aug 2018 14:20:59 +0000 (14:20 +0000)]
re PR target/86984 (invalid relocation accessing a const char array)
PR target/86984
* expr.c (expand_assignment): Assert that bitpos is positive.
(store_field): Likewise
(expand_expr_real_1): Make sure that bitpos is positive.
* config/alpha/alpha.h (CONSTANT_ADDRESS_P): Avoid signed
integer overflow.
PR target/86984
* gcc.target/alpha/pr86984.c: New test.
Jonathan Wakely [Mon, 20 Aug 2018 13:53:56 +0000 (14:53 +0100)]
PR libstdc++/86963 Remove use of __tuple_base in std::tuple
The _Tuple_impl base class can be used to disable copy/move assignment,
without requiring an extra base class.
Exception specifications on std::tuple assignment and swap functions can
be defined directly using is_nothrow_swappable, instead of querying the
base classes.
PR libstdc++/86963
* include/std/tuple (_Tuple_impl::operator=): Define as deleted.
(_Tuple_impl::_M_assign): New functions to perform assignment instead
of assignment operators.
(_Tuple_impl::_M_swap): Remove exception specification.
(_Tuple_impl<_Idx, _Head>): Likewise.
(_TC::_NonNestedTuple, _TC::_NotSameTuple): Use __remove_cvref_t.
(__tuple_base): Remove.
(tuple, tuple<_T1, _T2>): Remove inheritance from __tuple_base.
(tuple::operator=, tuple<_T1, _T2>::operator=): Call _M_assign.
(tuple::swap, tuple<_T1, _T2>::swap): Define exception specification
using __is_nothrow_swappable.
(tuple<_T1, _T2>::tuple(_U1&&, _U2&&)): Use __remove_cvref_t.
The early debug info for the upper bound of the type of vla a that we stream
out is:
...
DIE 0: DW_TAG_subrange_type (0x7f85029a90f0)
DW_AT_upper_bound: location descriptor:
(0x7f85029a9230) DW_OP_GNU_variable_value die -> 0 (0x7f85029a94b0), 0
DIE 0: DW_TAG_variable (0x7f85029a94b0)
DW_AT_name: "D.1922"
DW_AT_type: die -> 0 (0x7f85029a3d70)
DW_AT_artificial: 1
...
and in ltrans we have for that same upper bound:
...
DIE 0: DW_TAG_subrange_type (0x7f5183b57d70)
DW_AT_upper_bound: die -> 0 (0x7f5183b576e0)
DIE 0: DW_TAG_variable (0x7f5183b576e0)
DW_AT_name: "D.4278"
DW_AT_abstract_origin: die -> label: vla_1.c.6719312a + 193 (0x7f5183b57730)
...
where D.4278 has abstract origin D.1922.
The D.4278 die has no DW_AT_location, so when evaluting "sizeof (a)" in the
debugger, we can't find the information to get the value of D.4278, and the
debugger prints "<optimized out>".
This patch fixes that by either:
- adding DW_AT_location to the referenced variable die, or
- instead of using a ref for the upper bound, using an exprloc.
When changing gcc.dg/guality/guality.exp to run the usual flto flavours
"-fno-use-linker-plugin -flto-partition=none" and "-fuse-linker-plugin
-fno-fat-lto-objects" in combination with O0, Og, O1, O2, O3 and Os, this patch
fixes all (20) failures in vla-1.c, leaving only:
...
No symbol "i" in current context.
UNSUPPORTED: gcc.dg/guality/vla-1.c -O3 -flto -fno-use-linker-plugin \
-flto-partition=none line 17 i == 5
'a' has unknown type; cast it to its declared type
UNSUPPORTED: gcc.dg/guality/vla-1.c -O3 -flto -fno-use-linker-plugin \
-flto-partition=none line 17 sizeof (a) == 6
...
Bootstrapped and reg-tested on x86_64.
2018-08-20 Tom de Vries <tdevries@suse.de>
* dwarf2out.c (add_scalar_info): Don't add reference to existing die
unless the referenced die describes the added property using
DW_AT_location or DW_AT_const_value. Fall back to exprloc case.
Otherwise, add a DW_AT_location to the referenced die.
Jonathan Wakely [Mon, 20 Aug 2018 12:13:25 +0000 (13:13 +0100)]
Refactor std::optional SFINAE constraints
* include/std/optional (_Optional_payload): Use variable templates
for conditions in default template arguments and exception
specifications.
(optional): Likewise. Adjust indentation.
(optional::__not_self, optional::__not_tag, optional::_Requires): New
SFINAE helpers.
(optional::optional): Use new helpers in constructor constraints.
* include/std/type_traits (__or_v, __and_v): New variable templates.
* testsuite/20_util/optional/cons/value_neg.cc: Change dg-error to
dg-prune-output. Remove unused header.
Uros Bizjak [Sun, 19 Aug 2018 19:10:37 +0000 (21:10 +0200)]
re PR target/86994 (64-bit gcc.target/i386/20040112-1.c FAILs)
PR target/86994
* config/i386/i386.c (ix86_rtx_costs) [case SET]: Check source for
register_operand when calling ix86_set_reg_reg_cost.
[case CONST_INT, case CONST, case LABEL_REF, case SYMBOL_REF]:
Set *total to 0 for operands that satisfy x86_64_immediate_operand
predicate and to 1 otherwise.
Iain Sandoe [Sat, 18 Aug 2018 09:15:05 +0000 (09:15 +0000)]
Darwin does not support gsplit-dwarf.
2018-08-18 Iain Sandoe <iain@sandoe.co.uk>
gcc/
* config/darwin.c (darwin_override_options): If -gsplit-dwarf is set,
emit a diagnostic that it is not supported and reset the option.
* config/darwin.h (DRIVER_SELF_SPECS): Note that gsplit-dwarf is not
supported and consume the option. (ASM_FINAL_SPEC): New.
gcc/testsuite
* g++.dg/debug/dwarf2/pr85302.C: Skip unsupported split DWARF
test on Darwin.
* g++.dg/debug/dwarf2/pr85302.C: Likewise.
* gcc.dg/lto/pr83719_0.c: Likewise.
int test ()
{
return callee ("first", "second", "third");
}
for which -Wwrite-strings was emitting:
Wwrite-strings.C: In function 'int test()':
Wwrite-strings.C:10:44: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
10 | return callee ("first", "second", "third");
| ^
This patch fixes the warning so that it underlines the pertinent argument
at the callsite:
Wwrite-strings.C: In function 'int test()':
Wwrite-strings.C:10:27: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
10 | return callee ("first", "second", "third");
| ^~~~~~~~
Ideally we ought to also issue a "note" highlighting the pertinent
parameter within the decl, but that's not readily available, so I'm
saving it for another patch.
gcc/cp/ChangeLog:
* typeck.c (string_conv_p): Extract location from EXP and use it
in preference to input_location when issuing warnings.
gcc/testsuite/ChangeLog:
* g++.dg/conversion/Wwrite-strings.C: New test.
David Malcolm [Fri, 17 Aug 2018 18:21:31 +0000 (18:21 +0000)]
Formatted printing for dump_* in the middle-end
This patch converts dump_print and dump_printf_loc from using
printf (and thus ATTRIBUTE_PRINTF) to using a new pretty-printer
based on pp_format, which supports formatting middle-end types.
In particular, the following codes are implemented (in addition
to the standard pretty_printer ones):
%E: gimple *:
Equivalent to: dump_gimple_expr (MSG_*, TDF_SLIM, stmt, 0)
%G: gimple *:
Equivalent to: dump_gimple_stmt (MSG_*, TDF_SLIM, stmt, 0)
%T: tree:
Equivalent to: dump_generic_expr (MSG_*, arg, TDF_SLIM).
Hence it becomes possible to convert e.g.:
if (dump_enabled_p ())
{
dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location,
"not vectorized: different sized vector "
"types in statement, ");
dump_generic_expr (MSG_MISSED_OPTIMIZATION, TDF_SLIM, vectype);
dump_printf (MSG_MISSED_OPTIMIZATION, " and ");
dump_generic_expr (MSG_MISSED_OPTIMIZATION, TDF_SLIM, nunits_vectype);
dump_printf (MSG_MISSED_OPTIMIZATION, "\n");
}
into a one-liner:
if (dump_enabled_p ())
dump_printf_loc (MSG_MISSED_OPTIMIZATION, vect_location,
"not vectorized: different sized vector "
"types in statement, %T and %T\n",
vectype, nunits_vectype);
Unlike regular pretty-printers, this one captures optinfo_item
instances for the formatted chunks as appropriate, so that when
written out to a JSON optimization record, the relevant parts of
the message are labelled by type, and by source location (so that
e.g. %G is entirely equivalent to using dump_gimple_stmt).
dump_printf and dump_printf_loc become marked with
ATTRIBUTE_GCC_DUMP_PRINTF, which the patch also implements.
gcc/c-family/ChangeLog:
* c-format.c (enum format_type): Add gcc_dump_printf_format_type.
(gcc_dump_printf_length_specs): New.
(gcc_dump_printf_flag_pairs): New.
(gcc_dump_printf_flag_specs): New.
(gcc_dump_printf_char_table): New.
(format_types_orig): Add entry for "gcc_dump_printf".
(init_dynamic_diag_info): Set up length_char_specs and
conversion_specs for gcc_dump_printf_format_type.
(handle_format_attribute): Handle gcc_dump_printf_format_type.
gcc/ChangeLog:
* dump-context.h: Include "dumpfile.h".
(dump_context::dump_printf_va): Convert final param from va_list
to va_list *. Convert from ATTRIBUTE_PRINTF to
ATTRIBUTE_GCC_DUMP_PRINTF.
(dump_context::dump_printf_loc_va): Likewise.
* dumpfile.c: Include "stringpool.h".
(make_item_for_dump_printf_va): Delete.
(make_item_for_dump_printf): Delete.
(class dump_pretty_printer): New class.
(dump_pretty_printer::dump_pretty_printer): New ctor.
(dump_pretty_printer::emit_items): New member function.
(dump_pretty_printer::emit_any_pending_textual_chunks): New member
function.
(dump_pretty_printer::emit_item): New member function.
(dump_pretty_printer::stash_item): New member function.
(dump_pretty_printer::format_decoder_cb): New member function.
(dump_pretty_printer::decode_format): New member function.
(dump_context::dump_printf_va): Reimplement in terms of
dump_pretty_printer.
(dump_context::dump_printf_loc_va): Convert final param from va_list
to va_list *.
(dump_context::begin_scope): Reimplement call to
make_item_for_dump_printf.
(dump_printf): Update for change to dump_printf_va.
(dump_printf_loc): Likewise.
(selftest::test_capture_of_dump_calls): Convert "stmt" from
greturn * to gimple *. Add a test_decl. Add tests of dump_printf
with %T, %E, and %G.
* dumpfile.h (ATTRIBUTE_GCC_DUMP_PRINTF): New macro.
(dump_printf): Replace ATTRIBUTE_PRINTF_2 with
ATTRIBUTE_GCC_DUMP_PRINTF (2, 3).
(dump_printf_loc): Replace ATTRIBUTE_PRINTF_3 with
ATTRIBUTE_GCC_DUMP_PRINTF (3, 0).
* tree-vect-data-refs.c (vect_lanes_optab_supported_p): Convert
use of HOST_WIDE_INT_PRINT_DEC on unsigned HOST_WIDE_INT "count"
within a dump_printf_loc call to "%wu".
(vector_alignment_reachable_p): Merge two dump_printf[_loc] calls,
converting a use of HOST_WIDE_INT_PRINT_DEC to "%wd". Add a
missing space after "=".
* tree-vect-loop.c (vect_analyze_loop_2) Within a dump_printf
call, convert use of HOST_WIDE_INT_PRINT_DEC to "%wd".
* tree-vect-slp.c (vect_slp_bb): Within a dump_printf_loc call,
convert use of HOST_WIDE_INT_PRINT_UNSIGNED to "%wu".
* tree-vectorizer.c (try_vectorize_loop_1): Likewise. Remove
duplicate "vectorized" from message.
gcc/testsuite/ChangeLog:
* gcc.dg/format/gcc_diag-1.c: Fix typo. Add test coverage for
gcc_dump_printf.
* gcc.dg/format/gcc_diag-10.c: Add gimple typedef. Add test
coverage for gcc_dump_printf.
Jonathan Wakely [Fri, 17 Aug 2018 17:52:49 +0000 (18:52 +0100)]
PR libstdc++/86963 Implement LWG 2729 constraints on tuple assignment
PR libstdc++/86963
* include/std/tuple (__tuple_base): New class template with deleted
copy assignment operator.
(tuple, tuple<_T1, _T2>): Derive from __tuple_base<tuple> so that
implicit copy/move assignment operator will be deleted/suppressed.
(tuple::__assignable, tuple<_T1, _T2>::__assignable): New helper
functions for SFINAE constraints on assignment operators.
(tuple::__nothrow_assignable, tuple<_T1, _T2>::__nothrow_assignable):
New helper functions for exception specifications.
(tuple::operator=(const tuple&), tuple::operator=(tuple&&))
(tuple<_T1, _T2>::operator=(const tuple&))
(tuple<_T1, _T2>::operator=(tuple&&)): Change parameter types to
__nonesuch_no_braces when the operator should be defined implicitly.
Use __nothrow_assignable for exception specifications.
(tuple::operator=(const tuple<_UElements...>&))
(tuple::operator=(tuple<_UElements...>&&))
(tuple<_T1, _T2>::operator=(const tuple<_U1, _U2>&))
(tuple<_T1, _T2>::operator=(tuple<_U1, _U2>&&))
(tuple<_T1, _T2>::operator=(const pair<_U1, _U2>&))
(tuple<_T1, _T2>::operator=(pair<_U1, _U2>&&)): Constrain using
__assignable and use __nothrow_assignable for exception
specifications.
* python/libstdcxx/v6/printers.py (is_specialization_of): Accept
gdb.Type as first argument, instead of a string.
(StdTuplePrinter._iterator._is_nonempty_tuple): New method to check
tuple for expected structure.
(StdTuplePrinter._iterator.__init__): Use _is_nonempty_tuple.
* testsuite/20_util/tuple/dr2729.cc: New test.
* testsuite/20_util/tuple/element_access/get_neg.cc: Change dg-error
to dg-prune-output.
This gives a name to the conditional branch and conditional return
patterns, so that it looks neater in dumps and verbose asm. Also, the
comment for conditional branch was out of date; this fixes it.
* config/rs6000/rs6000.md (*cbranch, *creturn): Name these patterns
(they were unnamed before). Fix comments.
Martin Liska [Fri, 17 Aug 2018 09:25:56 +0000 (11:25 +0200)]
Merge Ignore and Deprecated in .opt files.
2018-08-17 Martin Liska <mliska@suse.cz>
* common.opt: Remove Warn, Init and Report for options with
Ignore/Deprecated flag. Warning is done automatically for
Deprecated flags.
* config/i386/i386.opt: Likewise.
* config/ia64/ia64.opt: Likewise.
* config/rs6000/rs6000.opt: Likewise.
* cppbuiltin.c (define_builtin_macros_for_compilation_flags):
Remove usage of flag_check_pointer_bounds.
* lto-wrapper.c (merge_and_complain): Do not handle
OPT_fcheck_pointer_bounds.
(append_compiler_options): Likewise.
* opt-functions.awk: Do not handle Deprecated.
* optc-gen.awk: Check that Var, Report and Init are not
used for an option with Ignore/Deprecated flag.
* opts-common.c (decode_cmdline_option): Do not report
CL_ERR_DEPRECATED.
(read_cmdline_option): Report warning for OPT_SPECIAL_deprecated
options.
* opts.h (struct cl_option): Remove cl_deprecated flag.
(CL_ERR_DEPRECATED): Remove error enum value.
2018-08-17 Martin Liska <mliska@suse.cz>
Richard Biener [Fri, 17 Aug 2018 08:48:58 +0000 (08:48 +0000)]
re PR middle-end/86505 (__builtin_va_arg_pack_len() computes the number of arguments wrongly)
2018-08-17 Richard Biener <rguenther@suse.de>
PR middle-end/86505
* tree-inline.c (copy_bb): When inlining __builtin_va_arg_pack_len ()
across a va-arg-pack using call adjust its return value accordingly.
Martin Sebor [Fri, 17 Aug 2018 04:01:14 +0000 (04:01 +0000)]
re PR tree-optimization/86853 (sprintf optimization for wide strings doesn't account for conversion failure)
gcc/ChangeLog:
PR tree-optimization/86853
* gimple-ssa-sprintf.c (struct format_result): Rename member.
(struct fmtresult): Add member and initialize it in ctors.
(format_character): Handle %C. Extend range to NUL. Set MAYFAIL.
(format_string): Handle %S the same as %ls. Set MAYFAIL.
(format_directive): Set POSUNDER4K when MAYFAIL is set.
(parse_directive): Handle %C same as %c.
(sprintf_dom_walker::compute_format_length): Adjust.
(is_call_safe): Adjust.
gcc/testsuite/ChangeLog:
PR tree-optimization/86853
* gcc.dg/tree-ssa/builtin-sprintf-10.c: New test.
* gcc.dg/tree-ssa/builtin-sprintf-11.c: New test.
* gcc.dg/tree-ssa/builtin-sprintf-warn-18.c: Adjust.
Bernd Edlinger [Thu, 16 Aug 2018 22:38:04 +0000 (22:38 +0000)]
builtins.c (c_strlen): Add new parameter eltsize.
* builtins.c (c_strlen): Add new parameter eltsize. Use it
for determining how to count the elements.
* builtins.h (c_strlen): Adjust prototype.
* expr.c (string_constant): Add new parameter mem_size.
Set *mem_size appropriately.
* expr.h (string_constant): Adjust protoype.
* gimple-fold.c (get_range_strlen): Add new parameter eltsize.
* gimple-fold.h (get_range_strlen): Adjust prototype.
* gimple-ssa-sprintf.c (get_string_length): Add new parameter eltsize.
(format_string): Call get_string_length with eltsize.
David Malcolm [Thu, 16 Aug 2018 22:33:00 +0000 (22:33 +0000)]
diagnostics: fix bad interaction between line spans and line numbers
Without this patch, the "line span" markers and the line numbering
interacted badly, leading to stray copies of the line-span markers
appearing as prefixes on the first source line in a span:
missing-header-fixit-3.c: In function 'test':
missing-header-fixit-3.c:9:3: warning: implicit declaration of function 'printf' [-Wimplicit-function-declaration]
9 | printf ("%i of %i\n", i, j);
| ^~~~~~
missing-header-fixit-3.c:9:3: warning: incompatible implicit declaration of built-in function 'printf'
missing-header-fixit-3.c:9:3: note: include '<stdio.h>' or provide a declaration of 'printf'
missing-header-fixit-3.c:1:1:
|+#include <stdio.h>
missing-header-fixit-3.c:1:1:1 | /* Example of a fix-it hint that adds a #include directive,
missing-header-fixit-3.c:9:3:
missing-header-fixit-3.c:9:3:9 | printf ("%i of %i\n", i, j);
| ^~~~~~
With this patch, we now correctly print:
missing-header-fixit-3.c: In function 'test':
missing-header-fixit-3.c:9:3: warning: implicit declaration of function 'printf' [-Wimplicit-function-declaration]
9 | printf ("%i of %i\n", i, j);
| ^~~~~~
missing-header-fixit-3.c:9:3: warning: incompatible implicit declaration of built-in function 'printf'
missing-header-fixit-3.c:9:3: note: include '<stdio.h>' or provide a declaration of 'printf'
missing-header-fixit-3.c:1:1:
+ |+#include <stdio.h>
1 | /* Example of a fix-it hint that adds a #include directive,
missing-header-fixit-3.c:9:3:
9 | printf ("%i of %i\n", i, j);
| ^~~~~~
gcc/ChangeLog:
* diagnostic.c (default_diagnostic_start_span_fn): Call pp_string
to emit the span, rather than setting it as the prefix.
gcc/testsuite/ChangeLog:
* gcc.dg/missing-header-fixit-3.c: New test.
David Malcolm [Thu, 16 Aug 2018 22:28:19 +0000 (22:28 +0000)]
diagnostics: tweak to line-insertion fix-it hints with line-numbering
This commit slightly tweaks line-insertion fix-it hints, so that
with line-numbering, rather than e.g.:
99 | x = a;
|+ break;
110 | case 'b':
| ^~~~~~~~
we fill the margin with "+":
99 | x = a;
+++ |+ break;
110 | case 'b':
| ^~~~~~~~
to emphasize that this is a suggested new line, rather than the user's
source.
gcc/ChangeLog:
* diagnostic-show-locus.c (layout::start_annotation_line): Add
"margin_char" parameter, defaulting to space. Use it in place
of pp_space for the initial part of the margin.
(layout::print_leading_fixits): Use '+' when filling the margin
of line-insertion fix-it hints.
gcc/testsuite/ChangeLog:
* gcc.dg/plugin/diagnostic-test-show-locus-bw-line-numbers.c
(test_fixit_insert_newline): Update expected output to show '+'
characters in margin of line-insertion fix-it hint.
There are some patterns that recognise the parallel of an add and a
compare, and split it back to the same two insns. This apparently
helped RIOS machines before RTL scheduling existed? Either way, it
isn't helpful anymore, and even hurts a tiny bit. So, delete it.
* config/rs6000/rs6000.md (two unnamed define_insn and define_split):
Delete.
Now that it is the default for branch insns like for all other insns,
we don't need to set it explicitly so often anymore.
* config/rs6000/altivec.md: Don't set length attribute to the default
value, for branch instructions.
* config/rs6000/darwin.md: Ditto.
* config/rs6000/rs6000.md: Ditto.
This moves what is currently the default of the length attribute to
the only branch instruction patterns where it applies, namely, the
B-form instructions. It was used for the "jump" instruction as well
before, but that is an I-form instruction and always has length 4.
* config/rs6000/rs6000.md (length): Always define as const_int 4.
(unnamed conditional branch define_insn): Set length to 4 or 8
depending on offset.
(<bd>_<mode>): Similar, for alternative 0.
(<bd>tf_<mode>): Ditto.
David Malcolm [Thu, 16 Aug 2018 17:07:15 +0000 (17:07 +0000)]
-Wmisleading-indentation: fix ICE in get_visual_column (PR c++/70693)
PR c++/70693 reports a crash within -Wmisleading-indentation in
get_visual_column, reading past the end of a source line.
The issue occurs due to a stray carriage return aka '\r' aka ^M, occurring
towards the end of line 35 of attachment 38289 - but not at the end itself.
This carriage return confuses our line numbering: from that point in the
file, the lexer (and thus location_t values) use line numbers that are
one larger than those seen by input.c, "cat -n" and emacs.
This discrepancy between the lexer's line numbering and input.c's line
numbering leads to an out-of-range read in get_visual_column (trying to
read column 8, to locate the first non-whitespace on the line containing
"break;", but finding the next line, which is only 4 characters long).
This patch fixes the ICE by adding a range check to get_visual_column
before accessing the input.c line buffer. This is arguably papering
over the root cause, but there are presumably other ways of triggering
such an out-of-range read by writing to the source file after the lexer
but before -Wmisleading-indentation, and we ought to be not ICE in the
face of that.
gcc/c-family/ChangeLog:
PR c++/70693
* c-common.c (selftest::c_family_tests): Call
selftest::c_indentation_c_tests.
* c-common.h (selftest::c_indentation_c_tests): New decl.
* c-indentation.c: Include "selftest.h".
(next_tab_stop): Add "tab_width" param, rather than accessing
cpp_opts.
(get_visual_column): Likewise. Clarify comment. Bulletproof
against reading past the end of the line.
(get_first_nws_vis_column): Add "tab_width" param.
(detect_intervening_unindent): Likewise.
(should_warn_for_misleading_indentation): Read tab width from
cpp_opts and pass around.
(selftest::test_next_tab_stop): New test.
(selftest::assert_get_visual_column_succeeds): New function.
(ASSERT_GET_VISUAL_COLUMN_SUCCEEDS): New macro.
(selftest::assert_get_visual_column_fails): New function.
(ASSERT_GET_VISUAL_COLUMN_FAILS): New macro.
(selftest::test_get_visual_column): New test.
(selftest::c_indentation_c_tests): New function.
gcc/testsuite/ChangeLog:
PR c++/70693
* c-c++-common/Wmisleading-indentation-pr70693.c: New test.
Tamar Christina [Thu, 16 Aug 2018 17:05:19 +0000 (17:05 +0000)]
Allow larger copies when not slow_unaligned_access and no padding.
This allows copy_blkmode_to_reg to perform larger copies when it is safe to do so by calculating
the bitsize per iteration doing the maximum copy allowed that does not read more
than the amount of bits left to copy.
Strictly speaking, this copying is only done if:
1. the target supports fast unaligned access
2. no padding is being used.
This should avoid the issues of the first patch (PR85123) but still work for targets that are safe
to do so.
Original patch https://gcc.gnu.org/ml/gcc-patches/2017-11/msg01088.html
Previous respin https://gcc.gnu.org/ml/gcc-patches/2018-04/msg00239.html
gcc/
2018-08-16 Tamar Christina <tamar.christina@arm.com>
* expr.c (copy_blkmode_to_reg): Perform larger copies when safe.
Jonathan Wakely [Thu, 16 Aug 2018 16:56:40 +0000 (17:56 +0100)]
Avoid deprecation warning with -Wsystem-headers
C++17 says to use std::uncaught_exceptions() here instead of
std::uncaught_exception() but since we only care whether the result is
non-zero (and we aren't planning to remove the deprecated version) we
can just keep using std::uncaught_exception() and suppress the warning.
* include/std/ostream (basic_ostream::sentry::~sentry): Suppress
deprecation warnings for using uncaught_exception().
Vlad Lazar [Thu, 16 Aug 2018 16:33:43 +0000 (16:33 +0000)]
expmed.h (canonicalize_comparison): New declaration.
* expmed.h (canonicalize_comparison): New declaration.
* expmed.c (canonicalize_comparison, equivalent_cmp_code): New function.
* expmed.c (emit_store_flag_1): Add call to canonicalize_comparison.
* optabs.c (prepare_cmp_insn): Likewise.
* rtl.h (unsigned_condition_p): New function which checks if a
comparison operator is unsigned.
* gcc.target/aarch64/imm_choice_comparison.c: New test.
Tamar Christina [Thu, 16 Aug 2018 10:39:13 +0000 (10:39 +0000)]
Update fall through pattern for FP16 patterns in ARM.
The original issue comes from the fact that the code does
... foo (... bar)
{
return bar;
}
The expansion of the return statement causes GCC to try to return the value in
a register. GCC will try to emit the move then, from MEM to REG (due to the SSA
temporary.). It checks for a mov optab for this which isn't available and
then tries to do the move in bits using emit_move_multi_word.
emit_move_multi_word will split the move into sub parts, but then needs to get
the sub parts and does this using subregs, but it's told it can't do subregs!
The compiler is now stuck in an infinite loop.
The way this is worked around in the back-end is that we have move patterns in
neon.md that usually just force the register instead of checking with the
back-end. This prevents emit_move_multi_word from being needed. However the
pattern for V4HF and V8HF were guarded by TARGET_NEON && TARGET_FP16.
I don't believe the TARGET_FP16 guard to be needed, because the pattern doesn't
actually generate code and requires another pattern for that, and a reg to reg move
should always be possible anyway. So allowing the force to register here is safe
and it allows the compiler to generate a correct error instead of ICEing in an
infinite loop.
gcc/
2018-08-16 Tamar Christina <tamar.christina@arm.com>
Sam Tebbs [Thu, 16 Aug 2018 09:43:58 +0000 (09:43 +0000)]
[aarch64] Make common aarch64 options target-dependent
This patch replaces the "Common" attribute in some aarch64 options with "Target"
to make them target-dependent. This doesn't affect their behaviour or how they
are documented with "--help", but does mean that they follow the option
specification that target-specific options are given the "Target" attribute.
Tested by ensuring the changed options are still accepted as before and that
they aren't invokable from an invalid target. Bootstrapped and regression tested
on aarch64-none-elf with ... regressions.
2018-08-16 Sam Tebbs <sam.tebbs@arm.com>
* config/aarch64/aarch64.opt (mlow-precision-recip-sqrt)
(mlow-precision-sqrt, mlow-precision-div, mverbose-cost-dump): Replace
"Common" with "Target".
Will Schmidt [Wed, 15 Aug 2018 20:24:57 +0000 (20:24 +0000)]
rs600.c (rs6000_gimple_fold_builtin): Add entries to allow folding of mergeh() and mergel() for the float and double...
[gcc]
2018-08-07 Will Schmidt <will_schmidt@vnet.ibm.com>
* config/rs6000/rs600.c (rs6000_gimple_fold_builtin): Add entries to
allow folding of mergeh() and mergel() for the float and double types.
(fold_mergehl_helper): Rework to handle building a permute tree
for float vectors.
Jonathan Wakely [Wed, 15 Aug 2018 19:46:25 +0000 (20:46 +0100)]
Fix experimental::pmr typedefs and add tests
The typedefs in <experimental/regex> and <experimental/string> don't
need to be in the __cxx11 namespace, because they are only aliases and
so will have the same mangled name as the underlying types.
* include/experimental/regex: Remove begin/end macros for namespace.
* include/experimental/string: Likewise.
* testsuite/experimental/polymorphic_allocator/pmr_typedefs_deque.cc:
New test.
* testsuite/experimental/polymorphic_allocator/
pmr_typedefs_forward_list.cc: New test.
* testsuite/experimental/polymorphic_allocator/pmr_typedefs_list.cc:
New test.
* testsuite/experimental/polymorphic_allocator/pmr_typedefs_map.cc:
New test.
* testsuite/experimental/polymorphic_allocator/pmr_typedefs_match.cc:
New test.
* testsuite/experimental/polymorphic_allocator/
pmr_typedefs_multimap.cc: New test.
* testsuite/experimental/polymorphic_allocator/
pmr_typedefs_multiset.cc: New test.
* testsuite/experimental/polymorphic_allocator/pmr_typedefs_set.cc:
New test.
* testsuite/experimental/polymorphic_allocator/pmr_typedefs_string.cc:
New test.
* testsuite/experimental/polymorphic_allocator/
pmr_typedefs_unordered_map.cc: New test.
* testsuite/experimental/polymorphic_allocator/
pmr_typedefs_unordered_multimap.cc: New test.
* testsuite/experimental/polymorphic_allocator/
pmr_typedefs_unordered_multiset.cc: New test.
* testsuite/experimental/polymorphic_allocator/
pmr_typedefs_unordered_set.cc: New test.
* testsuite/experimental/polymorphic_allocator/pmr_typedefs_vector.cc:
New test.
Jonathan Wakely [Wed, 15 Aug 2018 19:20:02 +0000 (20:20 +0100)]
Refactor uses-allocator construction
Remove duplicated logic in experimental::pmr::polymorphic_allocator by
calling the __uses_allocator_construct helper.
Fix bugs in std::pmr::polymorphic_allocator with incorrect SFINAE
constraint and incorrect argument order.
* include/bits/uses_allocator.h (__uses_allocator_construct): Qualify
calls to __uses_allocator_construct_impl and __use_alloc.
* include/experimental/memory_resource
(polymorphic_allocator::_M_construct): Remove.
(polymorphic_allocator::construct): Call __uses_allocator_construct.
Qualify calls to __use_alloc.
* include/std/memory_resource (polymorphic_allocator::construct): Fix
type in SFINAE constraint. Use constexpr if instead of tag dispatching
to _S_construct overloads.
(polymorphic_allocator::construct(pair<T1, T2>*, ...)): Fix order of
arguments to _S_construct_p.
(polymorphic_allocator::_S_construct): Remove.
(polymorphic_allocator::_S_construct_p): Return allocators by value
not by reference.
* include/std/scoped_allocator (scoped_allocator_adaptor::construct):
Qualify calls to __use_alloc.
* testsuite/20_util/polymorphic_allocator/construct_pair.cc: New test,
copied from testsuite/20_util/scoped_allocator/construct_pair.cc.
* testsuite/experimental/polymorphic_allocator/1.cc: New test.
* testsuite/experimental/polymorphic_allocator/construct_pair.cc:
New test.
The patch implements labels for various type mismatch errors in the C and
C++ frontends, and in -Wformat. I implemented it wherever accurate location
information was guaranteed (there are other places that could benefit, but
we need better location information in those places).
The labels can be disabled via -fno-diagnostics-show-labels.
Similarly:
param-type-mismatch.C: In function 'int test_1(int, int, float)':
param-type-mismatch.C:11:27: error: invalid conversion from 'int' to 'const char*' [-fpermissive]
11 | return callee_1 (first, second, third);
| ^~~~~~
| |
| int
param-type-mismatch.C:7:43: note: initializing argument 2 of 'int callee_1(int, const char*, float)'
7 | extern int callee_1 (int one, const char *two, float three);
| ~~~~~~~~~~~~^~~
where the first "error" describing the bad argument gets a label
describing the type inline (since it's non-obvious from "second").
The "note" describing the type of the param of the callee *doesn't*
get a label, since that information is explicit there in the
source ("const char *two").
The idea is that in any diagnostic where two aspects of the source aren't
in sync it ought to be easier for the user if we directly show them the
mismatching aspects inline (e.g. types).
As well as type mismatch errors, perhaps labels could also be used for
buffer overflow warnings, for describing the capacity of the destination
buffer vs the size of what's being written:
or somesuch. Another idea might be for macro expansion warnings:
warning: repeated side effects in macro expansion...
x = MIN (p++, q++);
~~~~^~~~~~~~~~
note: ...expanded here as
#define MIN(X,Y) (X<Y?X:Y)
^~~ ~ ~ ~ ~ ~ ~
| | | | | |
| | | | | q++
| | | | p++
| | | q++
| q++ p++
p++
The patch removes some logic from multiline.exp which special-cased
lines ending with a '|' character (thus complicating testing of this
patch). I believe that this was a vestige from experiments I did to
support strippng dg directives from the output; it was present in the
earliest version of multiline.exp I posted:
"[RFC, stage1] Richer source location information for gcc 6 (location ranges etc)"
https://gcc.gnu.org/ml/gcc-patches/2015-03/msg00837.html
and I believe was neved used.
gcc/c-family/ChangeLog:
* c-format.c: Include "selftest-diagnostic.h" and
"gcc-rich-location.h".
(format_warning_at_char): Pass NULL for new label params of
format_warning_va.
(class indirection_suffix): New class.
(class range_label_for_format_type_mismatch): New class.
(format_type_warning): Move logic for generating "*" suffix to
class indirection_suffix. Create "fmt_label" and "param_label"
to show their types, and pass them to the
format_warning_at_substring calls.
(selftest::test_type_mismatch_range_labels): New test.
(selftest::c_format_c_tests): Call it.
gcc/c/ChangeLog:
* c-objc-common.c: Include "gcc-rich-location.h".
(c_tree_printer): Move implemenation of '%T' to...
(print_type): ...this new function.
(range_label_for_type_mismatch::get_text): New function.
* c-typeck.c (convert_for_assignment): Add type labels to the rhs
range for the various ic_argpass cases.
(class maybe_range_label_for_tree_type_mismatch): New class.
(build_binary_op): Use it when calling binary_op_error.
gcc/cp/ChangeLog:
* call.c: Include "gcc-rich-location.h".
(convert_like_real): Add range label for "invalid conversion"
diagnostic.
(perform_implicit_conversion_flags): Add type label to the
"could not convert" error.
* error.c: Include "gcc-rich-location.h".
(range_label_for_type_mismatch::get_text): New function.
* typeck.c (convert_for_assignment): Add type label to
the "cannot convert" error if a location is available.
gcc/ChangeLog:
* common.opt (fdiagnostics-show-labels): New option.
* diagnostic-show-locus.c (class layout_range): Add field
"m_label".
(class layout): Add field "m_show_labels_p".
(layout_range::layout_range): Add param "label" and use it to
initialize m_label.
(make_range): Pass in NULL for new "label" param of layout_range's
ctor.
(layout::layout): Initialize m_show_labels_p.
(layout::maybe_add_location_range): Pass in loc_range->m_label
when constructing layout_range instances.
(struct line_label): New struct.
(layout::print_any_labels): New member function.
(layout::print_line): Call it if label-printing is enabled.
(selftest::test_one_liner_labels): New test.
(selftest::test_diagnostic_show_locus_one_liner): Call it.
* diagnostic.c (diagnostic_initialize): Initialize
context->show_labels_p.
* diagnostic.h (struct diagnostic_context): Add field
"show_labels_p".
* doc/invoke.texi (Diagnostic Message Formatting Options): Add
-fno-diagnostics-show-labels.
* dwarf2out.c (gen_producer_string): Add
OPT_fdiagnostics_show_labels to the ignored options.
* gcc-rich-location.c (gcc_rich_location::add_expr): Add "label"
param.
(gcc_rich_location::maybe_add_expr): Likewise.
* gcc-rich-location.h (gcc_rich_location::gcc_rich_location): Add
label" param, defaulting to NULL.
(gcc_rich_location::add_expr): Add "label" param.
(gcc_rich_location::maybe_add_expr): Likewise.
(class text_range_label): New class.
(class range_label_for_type_mismatch): New class.
* gimple-ssa-sprintf.c (fmtwarn): Pass NULL for new label params
of format_warning_va.
(fmtwarn_n): Likewise for new params of format_warning_n_va.
* lto-wrapper.c (merge_and_complain): Add
OPT_fdiagnostics_show_labels to the "pick one setting" options.
(append_compiler_options): Likewise to the dropped options.
(append_diag_options): Likewise to the passed-on options.
* opts.c (common_handle_option): Handle the new option.
* selftest-diagnostic.c
(test_diagnostic_context::test_diagnostic_context): Enable
show_labels_p.
* substring-locations.c: Include "gcc-rich-location.h".
(format_warning_n_va): Add "fmt_label" and "param_label" params
and use them as appropriate.
(format_warning_va): Add "fmt_label" and "param_label" params,
passing them on to format_warning_n_va.
(format_warning_at_substring): Likewise.
(format_warning_at_substring_n): Likewise.
* substring-locations.h (format_warning_va): Add "fmt_label" and
"param_label" params.
(format_warning_n_va): Likewise.
(format_warning_at_substring): Likewise.
(format_warning_at_substring_n): Likewise.
* toplev.c (general_init): Initialize global_dc->show_labels_p.
gcc/testsuite/ChangeLog:
* g++.dg/diagnostic/aka3.C: New test.
* g++.dg/diagnostic/param-type-mismatch-2.C: Update expected
output to show range labels.
* g++.dg/diagnostic/param-type-mismatch.C: Likewise.
* g++.dg/plugin/plugin.exp (plugin_test_list): Add...
* g++.dg/plugin/show-template-tree-color-labels.C: New test.
* gcc.dg/bad-binary-ops.c: Update expected output to show range
labels. Add an "aka" example.
* gcc.dg/cpp/pr66415-1.c: Update expected output to show range
labels.
* gcc.dg/format/diagnostic-ranges.c: Likewise.
* gcc.dg/format/pr72858.c: Likewise.
* gcc.dg/format/pr78498.c: Likewise.
* gcc.dg/param-type-mismatch.c: Add "-Wpointer-sign" to options.
Update expected output to show range labels. Add examples of
-Wincompatible-pointer-types and -Wpointer-sign for parameters.
* gcc.dg/plugin/diagnostic-test-show-locus-bw-line-numbers.c:
Update expected output to show range labels.
* gcc.dg/plugin/diagnostic-test-show-locus-bw.c: Likewise.
(test_very_wide_line): Adjust so that label is at left-clipping
boundary.
(test_very_wide_line_2): New test.
* gcc.dg/plugin/diagnostic-test-show-locus-color-line-numbers.c:
Update expected output to show range labels.
* gcc.dg/plugin/diagnostic-test-show-locus-color.c: Likewise.
* gcc.dg/plugin/diagnostic-test-show-locus-no-labels.c: New test.
* gcc.dg/plugin/diagnostic_plugin_show_trees.c (show_tree): Update
for new param to gcc_rich_location::add_expr.
* gcc.dg/plugin/diagnostic_plugin_test_show_locus.c (add_range):
Add "label" param.
(test_show_locus): Add examples of labels to various tests. Tweak
the "very wide_line" test case and duplicate it, to cover the
boundary values for clipping of labels against the left-margin.
* gcc.dg/plugin/plugin.exp (plugin_test_list): Add
diagnostic-test-show-locus-no-labels.c.
* gcc.dg/pr69554-1.c: Update expected output to show range labels.
Update line numbers of dg-locus directives.
* gcc.dg/pr69627.c: Update expected output to show range labels.
* lib/multiline.exp (proc _build_multiline_regex): Remove
special-case handling of lines with trailing '|'.
libcpp/ChangeLog:
* include/line-map.h (struct location_range): Add "m_label" field.
(class rich_location): Add description of labels to leading
comment.
(rich_location::rich_location): Add "label" param, defaulting to
NULL.
(rich_location::add_range): Likewise.
(struct label_text): New struct.
(class range_label): New abstract base class.
* line-map.c (rich_location::rich_location): Add "label" param;
use it.
(rich_location::add_range): Likewise.
Iain Sandoe [Wed, 15 Aug 2018 09:19:39 +0000 (09:19 +0000)]
Update Darwin section names for DWARF5
gcc/
2018-08-15 Iain Sandoe <iain@sandoe.co.uk>
PR target/81685
* config/darwin.h: (DEBUG_STR_OFFSETS_SECTION, DEBUG_LOCLISTS_SECTION,
DEBUG_RNGLISTS_SECTION) new macros. (DEBUG_PUBNAMES_SECTION,
DEBUG_PUBTYPES_SECTION) update to include GNU variant.
Martin Liska [Wed, 15 Aug 2018 08:55:15 +0000 (10:55 +0200)]
Fix merging of 2 predictors (PR tree-optimization/86925).
2018-08-15 Martin Liska <mliska@suse.cz>
PR tree-optimization/86925
* predict.c (expr_expected_value_1): When taking
later predictor, assign also probability.
Use fold_build2_initializer_loc in order to fold
the expression in -frounding-math.
2018-08-15 Martin Liska <mliska@suse.cz>
PR tree-optimization/86925
* gcc.dg/predict-20.c: New test.
* gcc.dg/predict-21.c: New test.
Andreas Schwab [Wed, 15 Aug 2018 06:57:45 +0000 (06:57 +0000)]
backport: ffi.c (ffi_call_go, [...]): New functions.
Backport of RISC-V support for libffi go closures
* src/riscv/ffi.c (ffi_call_go, ffi_prep_go_closure): New
functions.
(ffi_call_int): Renamed from ffi_call.
(ffi_call_asm, ffi_closure_inner): Adjust interface.
* src/riscv/ffitarget.h (FFI_GO_CLOSURES): Define.
* src/riscv/sysv.S (ffi_go_closure_asm): New function.
(ffi_closure_asm, ffi_call_asm): Update for adjusted interfaces.
projects / thirdparty / gcc.git / log
