initrd: switch initrd loading to struct file based APIs
There is no good reason to mess with file descriptors from in-kernel
code, switch the initrd loading to struct file based read and writes
instead.
Also Pass an explicit offset instead of ->f_pos, and to make that easier,
use file scope file structs and offsets everywhere except for
identify_ramdisk_image instead of the current strange mix.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
initrd: remove the BLKFLSBUF call in handle_initrd
BLKFLSBUF used to be overloaded for the ramdisk driver to free the whole
ramdisk, which was completely different behavior compared to all other
drivers. But this magic overload got removed in commit ff26956875c2
("brd: remove support for BLKFLSBUF"), so this call is entirely
pointless now.
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
md_setup_drive knows it works with md devices, so it is rather pointless
to open a file descriptor and issue ioctls. Just call directly into the
relevant low-level md routines after getting a handle to the device using
blkdev_get_by_dev instead.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: NeilBrown <neilb@suse.de> Acked-by: Song Liu <song@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the loop over the possible arrays into the caller to remove a level
of indentation for the whole function.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: NeilBrown <neilb@suse.de> Acked-by: Song Liu <song@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
devfs is long gone, and autoscan works just fine without this these days.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: NeilBrown <neilb@suse.de> Acked-by: Song Liu <song@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
md: replace the RAID_AUTORUN ioctl with a direct function call
Instead of using a spcial RAID_AUTORUN ioctl that only exists for
non-modular builds and is only called from the early init code, just
call the actual function directly.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: NeilBrown <neilb@suse.de> Acked-by: Song Liu <song@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
The only caller of the bstat function becomes cleaner and simpler when
open coding the function.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: NeilBrown <neilb@suse.de> Acked-by: Song Liu <song@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux into master
Pull clk fixes from Stephen Boyd:
"A couple build fixes for issues exposed this merge window and a fix
for the eMMC clk on AST2600 SoCs that fixes the rate that is
calculated by the clk framework"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Specify IOMEM dependency for HSDK pll driver
clk: AST2600: Add mux for EMMC clock
clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
Merge tag 'platform-drivers-x86-v5.8-2' of git://git.infradead.org/linux-platform-drivers-x86 into master
Pull x86 platform driver fixes from Andriy Shevchenko:
"Small fixes for this cycle:
- Fix procfs handling in Thinkpad ACPI driver
- Fix battery management on new ASUS laptops
- New IDs (Sapphire Rapids) in ISST tool"
* tag 'platform-drivers-x86-v5.8-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: asus-wmi: allow BAT1 battery name
platform/x86: ISST: Add new PCI device ids
platform/x86: thinkpad_acpi: Revert "Use strndup_user() in dispatch_proc_write()"
David Howells [Wed, 8 Jul 2020 08:27:07 +0000 (09:27 +0100)]
afs: Fix interruption of operations
The afs filesystem driver allows unstarted operations to be cancelled by
signal, but most of these can easily be restarted (mkdir for example). The
primary culprits for reproducing this are those applications that use
SIGALRM to display a progress counter.
File lock-extension operation is marked uninterruptible as we have a
limited time in which to do it, and the release op is marked
uninterruptible also as if we fail to unlock a file, we'll have to wait 20
mins before anyone can lock it again.
The store operation logs a warning if it gets interruption, e.g.:
kAFS: Unexpected error from FS.StoreData -4
because it's run from the background - but it can also be run from
fdatasync()-type things. However, store options aren't marked
interruptible at the moment.
Fix this in the following ways:
(1) Mark store operations as uninterruptible. It might make sense to
relax this for certain situations, but I'm not sure how to make sure
that background store ops aren't affected by signals to foreground
processes that happen to trigger them.
(2) In afs_get_io_locks(), where we're getting the serialisation lock for
talking to the fileserver, return ERESTARTSYS rather than EINTR
because a lot of the operations (e.g. mkdir) are restartable if we
haven't yet started sending the op to the server.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This broke procfs interface due to neglecting the fact that
the strings are not coming NULL terminated.
Revert the change till we will have a better clean up.
Fixes: 35d13c7a0512 ("platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write()") Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"A few quirks for the Elan touchpad driver, another Thinkpad is being
switched over from PS/2 to native RMI4 interface, and we gave a brand
new SW_MACHINE_COVER switch definition"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - add more hardware ID for Lenovo laptops
Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list
Revert "Input: elants_i2c - report resolution information for touch major"
Input: elan_i2c - only increment wakeup count on touch
Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen
ARM: dts: n900: remove mmc1 card detect gpio
Input: add `SW_MACHINE_COVER`
Merge tag 'iommu-fixes-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix a use-after-free of the device iommu-group. Found in the arm-smmu
driver, but the fix is in generic code.
- Fix for the new Allwinner IOMMU driver to use the atomic
readl_timeout() variant in IO/TLB flushing code.
- A couple of cleanups to fix various compile warnings.
* tag 'iommu-fixes-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Mark qcom_smmu_client_of_match as possibly unused
iommu: Fix use-after-free in iommu_release_device
iommu/amd: Make amd_iommu_apply_ivrs_quirks() static inline
iommu: SUN50I_IOMMU should depend on HAS_DMA
iommu/sun50i: Remove unused variable
iommu/sun50i: Change the readl timeout to the atomic variant
mm: document warning in move_normal_pmd() and make it warn only once
Naresh Kamboju reported that the LTP tests can cause warnings on i386
going back all the way to v5.0, and bisected it to commit 2c91bd4a4e2e
("mm: speed up mremap by 20x on large regions").
The warning in move_normal_pmd() is actually mostly correct, but we have
a very unusual special case at process creation time, when we may move
the stack down with an overlapping mode (kind of like a "memmove()"
except using the page tables).
And when you have just the right condition of "move a large initial
stack by the right alignment in the end, but with the early part of the
move being only page-aligned", we'll be in a situation where we're
trying to move a normal PMD entry on top of an already existing - but
now empty - PMD entry.
The warning is still worth having, in case it ever triggers other cases,
and perhaps as a reminder that we could do the stack move case more
efficiently (although it's clearly rare enough that it probably doesn't
matter).
But make it do WARN_ON_ONCE(), so that you can't flood the logs with it.
And add a *big* comment above it to explain and remind us what's going
on, because it took some figuring out to see how this could trigger.
Kudos to Joel Fernandes for debugging this.
Merge tag 'io_uring-5.8-2020-07-12' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two late fixes again:
- Fix missing msg_name assignment in certain cases (Pavel)
- Correct a previous fix for full coverage (Pavel)"
* tag 'io_uring-5.8-2020-07-12' of git://git.kernel.dk/linux-block:
io_uring: fix not initialised work->flags
io_uring: fix missing msg_name assignment
Merge tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two refcounting fixes and one prepartory patch for upcoming splice
cleanup:
- fix double put of block group with nodatacow
- fix missing block group put when remounting with discard=async
- explicitly set splice callback (no functional change), to ease
integrating splice cleanup patches"
* tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: wire up iter_file_splice_write
btrfs: fix double put of block group with nocow
btrfs: discard: add missing put when grabbing block group from unused list
Merge tag 'riscv-for-linus-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"I have a few KGDB-related fixes. They're mostly fixes for build
warnings, but there's also:
- Support for the qSupported and qXfer packets, which are necessary
to pass around GDB XML information which we need for the RISC-V GDB
port to fully function.
- Users can now select STRICT_KERNEL_RWX instead of forcing it on"
* tag 'riscv-for-linus-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Avoid kgdb.h including gdb_xml.h to solve unused-const-variable warning
kgdb: Move the extern declaration kgdb_has_hit_break() to generic kgdb.h
riscv: Fix "no previous prototype" compile warning in kgdb.c file
riscv: enable the Kconfig prompt of STRICT_KERNEL_RWX
kgdb: enable arch to support XML packet.
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes, four in driver and one in the SCSI Parallel
transport, which fixes an incredibly old bug so I suspect no-one has
actually used the functionality it fixes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: dh: Add Fujitsu device to devinfo and dh lists
scsi: mpt3sas: Fix error returns in BRM_status_show
scsi: mpt3sas: Fix unlock imbalance
scsi: iscsi: Change iSCSI workqueue max_active back to 1
scsi: scsi_transport_spi: Fix function pointer check
David Gow [Tue, 30 Jun 2020 04:32:14 +0000 (21:32 -0700)]
clk: Specify IOMEM dependency for HSDK pll driver
The HSDK pll driver uses the devm_ioremap_resource function, but does
not specify a dependency on IOMEM in Kconfig. This causes a build
failure on architectures without IOMEM, for example, UML (notably with
make allyesconfig).
Fix this by making CONFIG_CLK_HSDK depend on CONFIG_IOMEM.
Eddie James [Thu, 9 Jul 2020 19:57:05 +0000 (14:57 -0500)]
clk: AST2600: Add mux for EMMC clock
The EMMC clock can be derived from either the HPLL or the MPLL. Register
a clock mux so that the rate is calculated correctly based upon the
parent.
Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20200709195706.12741-2-eajames@linux.ibm.com Acked-by: Joel Stanley <joel@jms.id.au> Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
When building arm32 allmodconfig:
ld.lld: error: undefined symbol: ap_cp_unique_name
>>> referenced by ap-cpu-clk.c
>>> clk/mvebu/ap-cpu-clk.o:(ap_cpu_clock_probe) in archive drivers/built-in.a
ap_cp_unique_name is only compiled into the kernel image when
CONFIG_ARMADA_AP_CP_HELPER is selected (as it is not user selectable).
However, CONFIG_ARMADA_AP_CPU_CLK does not select it.
This has been a problem since the driver was added to the kernel but it
was not built before commit c318ea261749 ("cpufreq: ap806: fix cpufreq
driver needs ap cpu clk") so it was never noticed.
Merge tag '5.8-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four cifs/smb3 fixes: the three for stable fix problems found recently
with change notification including a reference count leak"
* tag '5.8-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
cifs: fix reference leak for tlink
smb3: fix unneeded error message on change notify
cifs: remove the retry in cifs_poxis_lock_set
smb3: fix access denied on change notify request to some servers
Merge tag 'inclusive-terminology' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux
Pull coding style terminology documentation from Dan Williams:
"The discussion has tapered off as well as the incoming ack, review,
and sign-off tags. I did not see a reason to wait for the next merge
window"
* tag 'inclusive-terminology' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux:
CodingStyle: Inclusive Terminology
1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking
BPF programs, from Maciej Żenczykowski.
2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu
Mariappan.
3) Slay memory leak in nl80211 bss color attribute parsing code, from
Luca Coelho.
4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin.
5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric
Dumazet.
6) xsk code dips too deeply into DMA mapping implementation internals.
Add dma_need_sync and use it. From Christoph Hellwig
7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko.
8) Check for disallowed attributes when loading flow dissector BPF
programs. From Lorenz Bauer.
9) Correct packet injection to L3 tunnel devices via AF_PACKET, from
Jason A. Donenfeld.
10) Don't advertise checksum offload on ipa devices that don't support
it. From Alex Elder.
11) Resolve several issues in TCP MD5 signature support. Missing memory
barriers, bogus options emitted when using syncookies, and failure
to allow md5 key changes in established states. All from Eric
Dumazet.
12) Fix interface leak in hsr code, from Taehee Yoo.
13) VF reset fixes in hns3 driver, from Huazhong Tan.
14) Make loopback work again with ipv6 anycast, from David Ahern.
15) Fix TX starvation under high load in fec driver, from Tobias
Waldekranz.
16) MLD2 payload lengths not checked properly in bridge multicast code,
from Linus Lüssing.
17) Packet scheduler code that wants to find the inner protocol
currently only works for one level of VLAN encapsulation. Allow
Q-in-Q situations to work properly here, from Toke
Høiland-Jørgensen.
18) Fix route leak in l2tp, from Xin Long.
19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport
support and various protocols. From Martin KaFai Lau.
20) Fix socket cgroup v2 reference counting in some situations, from
Cong Wang.
21) Cure memory leak in mlx5 connection tracking offload support, from
Eli Britstein.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
mlxsw: pci: Fix use-after-free in case of failed devlink reload
mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON()
net: macb: fix call to pm_runtime in the suspend/resume functions
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
net: macb: fix macb_get/set_wol() when moving to phylink
net: macb: mark device wake capable when "magic-packet" property present
net: macb: fix wakeup test in runtime suspend/resume routines
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
libbpf: Fix libbpf hashmap on (I)LP32 architectures
net/mlx5e: CT: Fix memory leak in cleanup
net/mlx5e: Fix port buffers cell size value
net/mlx5e: Fix 50G per lane indication
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
net/mlx5e: Fix VXLAN configuration restore after function reload
net/mlx5e: Fix usage of rcu-protected pointer
net/mxl5e: Verify that rpriv is not NULL
net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode
net/mlx5: Fix eeprom support for SFP module
cgroup: Fix sock_cgroup_data on big-endian.
selftests: bpf: Fix detach from sockmap tests
...
CONFIG_CC_IS_GCC is undefined when Clang is used, which breaks the build
(see our Travis link below).
Clang 8 was chosen as a minimum version for this check because there
were some improvements around __builtin_constant_p in that release. In
reality, MIPS was not even buildable until clang 9 so that check was not
technically necessary. Just remove all compiler checks and just assume
that we have a working compiler.
mlxsw: pci: Fix use-after-free in case of failed devlink reload
In case devlink reload failed, it is possible to trigger a
use-after-free when querying the kernel for device info via 'devlink dev
info' [1].
This happens because as part of the reload error path the PCI command
interface is de-initialized and its mailboxes are freed. When the
devlink '->info_get()' callback is invoked the device is queried via the
command interface and the freed mailboxes are accessed.
Fix this by initializing the command interface once during probe and not
during every reload.
This is consistent with the other bus used by mlxsw (i.e., 'mlxsw_i2c')
and also allows user space to query the running firmware version (for
example) from the device after a failed reload.
[1]
BUG: KASAN: use-after-free in memcpy include/linux/string.h:406 [inline]
BUG: KASAN: use-after-free in mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675
Write of size 4096 at addr ffff88810ae32000 by task syz-executor.1/2355
Fixes: a9c8336f6544 ("mlxsw: core: Add support for devlink info command") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 10 Jul 2020 21:29:38 +0000 (14:29 -0700)]
Merge branch 'macb-WOL-fixes'
Nicolas Ferre says:
====================
net: macb: Wake-on-Lan magic packet fixes and GEM handling
Here is a split series to fix WoL magic-packet on the current macb driver. Only
fixes in this one based on current net/master.
Changes in v5:
- Addressed the error code returned by phylink_ethtool_set_wol() as suggested
by Russell.
If PHY handles WoL, MAC doesn't stay in the way.
- Removed Florian's tag on 3/5 because of the above changes.
- Correct the "Fixes" tag on 1/5.
Changes in v4:
- Pure bug fix series for 'net'. GEM addition and MACB update removed: will be
sent later.
Changes in v3:
- Revert some of the v2 changes done in macb_resume(). Now the resume function
supports in-depth re-configuration of the controller in order to deal with
deeper sleep states. Basically as it was before changes introduced by this
series
- Tested for non-regression with our deeper Power Management mode which cuts
power to the controller completely
Changes in v2:
- Add patch 4/7 ("net: macb: fix macb_suspend() by removing call to netif_carrier_off()")
needed for keeping phy state consistent
- Add patch 5/7 ("net: macb: fix call to pm_runtime in the suspend/resume functions") that prevent
putting the macb in runtime pm suspend mode when WoL is used
- Collect review tags on 3 first patches from Florian: Thanks!
- Review of macb_resume() function
- Addition of pm_wakeup_event() in both MACB and GEM WoL IRQ handlers
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Ferre [Fri, 10 Jul 2020 12:46:45 +0000 (14:46 +0200)]
net: macb: fix call to pm_runtime in the suspend/resume functions
The calls to pm_runtime_force_suspend/resume() functions are only
relevant if the device is not configured to act as a WoL wakeup source.
Add the device_may_wakeup() test before calling them.
Fixes: 3e2a5e153906 ("net: macb: add wake-on-lan support via magic packet") Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Harini Katakam <harini.katakam@xilinx.com> Cc: Sergio Prado <sergio.prado@e-labworks.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Ferre [Fri, 10 Jul 2020 12:46:44 +0000 (14:46 +0200)]
net: macb: fix macb_suspend() by removing call to netif_carrier_off()
As we now use the phylink call to phylink_stop() in the non-WoL path,
there is no need for this call to netif_carrier_off() anymore. It can
disturb the underlying phylink FSM.
Fixes: 7897b071ac3b ("net: macb: convert to phylink") Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Harini Katakam <harini.katakam@xilinx.com> Cc: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Ferre [Fri, 10 Jul 2020 12:46:43 +0000 (14:46 +0200)]
net: macb: fix macb_get/set_wol() when moving to phylink
Keep previous function goals and integrate phylink actions to them.
phylink_ethtool_get_wol() is not enough to figure out if Ethernet driver
supports Wake-on-Lan.
Initialization of "supported" and "wolopts" members is done in phylink
function, no need to keep them in calling function.
phylink_ethtool_set_wol() return value is considered and determines
if the MAC has to handle WoL or not. The case where the PHY doesn't
implement WoL leads to the MAC configuring it to provide this feature.
Fixes: 7897b071ac3b ("net: macb: convert to phylink") Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Harini Katakam <harini.katakam@xilinx.com> Cc: Antoine Tenart <antoine.tenart@bootlin.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Ferre [Fri, 10 Jul 2020 12:46:42 +0000 (14:46 +0200)]
net: macb: mark device wake capable when "magic-packet" property present
Change the way the "magic-packet" DT property is handled in the
macb_probe() function, matching DT binding documentation.
Now we mark the device as "wakeup capable" instead of calling the
device_init_wakeup() function that would enable the wakeup source.
For Ethernet WoL, enabling the wakeup_source is done by
using ethtool and associated macb_set_wol() function that
already calls device_set_wakeup_enable() for this purpose.
That would reduce power consumption by cutting more clocks if
"magic-packet" property is set but WoL is not configured by ethtool.
Fixes: 3e2a5e153906 ("net: macb: add wake-on-lan support via magic packet") Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Harini Katakam <harini.katakam@xilinx.com> Cc: Sergio Prado <sergio.prado@e-labworks.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Ferre [Fri, 10 Jul 2020 12:46:41 +0000 (14:46 +0200)]
net: macb: fix wakeup test in runtime suspend/resume routines
Use the proper struct device pointer to check if the wakeup flag
and wakeup source are positioned.
Use the one passed by function call which is equivalent to
&bp->dev->dev.parent.
It's preventing the trigger of a spurious interrupt in case the
Wake-on-Lan feature is used.
Fixes: d54f89af6cc4 ("net: macb: Add pm runtime support") Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
we need to set 'active_vfs' back to 0, if something goes wrong during the
allocation of SR-IOV resources: otherwise, further VF configurations will
wrongly assume that bp->pf.vf[x] are valid memory locations, and commands
like the ones in the following sequence:
# echo 2 >/sys/bus/pci/devices/${ADDR}/sriov_numvfs
# ip link set dev ens1f0np0 up
# ip link set dev ens1f0np0 vf 0 trust on
Fixes: c0c050c58d840 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Fei Liu <feliu@redhat.com> CC: Jonathan Toppins <jtoppins@redhat.com> CC: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 10 Jul 2020 21:02:01 +0000 (14:02 -0700)]
Merge tag 'mlx5-fixes-2020-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2020-07-02
This series introduces some fixes to mlx5 driver.
V1->v2:
- Drop "ip -s" patch and mirred device hold reference patch.
- Will revise them in a later submission.
Please pull and let me know if there is any problem.
For -stable v5.2
('net/mlx5: Fix eeprom support for SFP module')
For -stable v5.4
('net/mlx5e: Fix 50G per lane indication')
For -stable v5.5
('net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash')
('net/mlx5e: Fix VXLAN configuration restore after function reload')
For -stable v5.7
('net/mlx5e: CT: Fix memory leak in cleanup')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Small update, a few more merge window bugs and normal driver bug
fixes:
- Two merge window regressions in mlx5: a error path bug found by
syzkaller and some lost code during a rework preventing ipoib from
working in some configurations
- Silence clang compilation warning in OPA related code
- Fix a long standing race condition in ib_nl for ACM
- Resolve when the HFI1 is shutdown"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Set PD pointers for the error flow unwind
IB/mlx5: Fix 50G per lane indication
RDMA/siw: Fix reporting vendor_part_id
IB/sa: Resolv use-after-free in ib_nl_make_request()
IB/hfi1: Do not destroy link_wq when the device is shut down
IB/hfi1: Do not destroy hfi1_wq when the device is shut down
RDMA/mlx5: Fix legacy IPoIB QP initialization
IB/hfi1: Add explicit cast OPA_MTU_8192 to 'enum ib_mtu'
Merge tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"TPM2 test changes to run on python3 and kselftest framework fix to
incorrect return type"
* tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: ksft_test_num return type should be unsigned
selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3
Merge tag 'io_uring-5.8-2020-07-10' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Fix memleak for error path in registered files (Yang)
- Export CQ overflow state in flags, necessary to fix a case where
liburing doesn't know if it needs to enter the kernel (Xiaoguang)
- Fix for a regression in when user memory is accounted freed, causing
issues with back-to-back ring exit + init if the ulimit -l setting is
very tight.
* tag 'io_uring-5.8-2020-07-10' of git://git.kernel.dk/linux-block:
io_uring: account user memory freed when exit has been queued
io_uring: fix memleak in io_sqe_files_register()
io_uring: fix memleak in __io_sqe_files_update()
io_uring: export cq overflow status to userspace
Merge tag 'block-5.8-2020-07-10' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix for inflight accounting, which affects only dm (Ming)
- Fix documentation error for bfq (Yufen)
- Fix memory leak for nbd (Zheng)
* tag 'block-5.8-2020-07-10' of git://git.kernel.dk/linux-block:
nbd: Fix memory leak in nbd_add_socket
blk-mq: consider non-idle request as "inflight" in blk_mq_rq_inflight()
docs: block: update and fix tiny error for bfq
Merge tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/misc
Pull in-kernel read and write op cleanups from Christoph Hellwig:
"Cleanup in-kernel read and write operations
Reshuffle the (__)kernel_read and (__)kernel_write helpers, and ensure
all users of in-kernel file I/O use them if they don't use iov_iter
based methods already.
The new WARN_ONs in combination with syzcaller already found a missing
input validation in 9p. The fix should be on your way through the
maintainer ASAP".
[ This is prep-work for the real changes coming 5.9 ]
* tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/misc:
fs: remove __vfs_read
fs: implement kernel_read using __kernel_read
integrity/ima: switch to using __kernel_read
fs: add a __kernel_read helper
fs: remove __vfs_write
fs: implement kernel_write using __kernel_write
fs: check FMODE_WRITE in __kernel_write
fs: unexport __kernel_write
bpfilter: switch to kernel_write
autofs: switch to kernel_write
cachefiles: switch to kernel_write
Merge tag 'dma-mapping-5.8-5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- add a warning when the atomic pool is depleted (David Rientjes)
- protect the parameters of the new scatterlist helper macros (Marek
Szyprowski )
* tag 'dma-mapping-5.8-5' of git://git.infradead.org/users/hch/dma-mapping:
scatterlist: protect parameters of the sg_table related macros
dma-mapping: warn when coherent pool is depleted
Merge tag 'pinctrl-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix an issue in the AMD driver for the UART0 group
- Fix a glitch issue in the Baytrail pin controller
* tag 'pinctrl-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
pinctrl: amd: fix npins for uart0 in kerncz_groups
Merge tag 'gpio-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes, most of them for the PCA953x that Andy worked hard to
fix up.
- Fix two runtime PM errorpath problems in the Arizona GPIO driver.
- Fix three interrupt issues in the PCA953x driver.
- Fix the automatic address increment handling in the PCA953x driver
again.
- Add a quirk to the PCA953x that fixes a problem in the Intel
Galileo Gen 2"
* tag 'gpio-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: Fix GPIO resource leak on Intel Galileo Gen 2
gpio: pca953x: disable regmap locking for automatic address incrementing
gpio: pca953x: Fix direction setting when configure an IRQ
gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2
gpio: pca953x: Synchronize interrupt handler properly
gpio: arizona: put pm_runtime in case of failure
gpio: arizona: handle pm_runtime_get_sync failure case
Merge tag 'gfs2-v5.8-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Fix gfs2 readahead deadlocks by adding a IOCB_NOIO flag that allows
gfs2 to use the generic fiel read iterator functions without having to
worry about being called back while holding locks".
* tag 'gfs2-v5.8-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Rework read and page fault locking
fs: Add IOCB_NOIO flag for generic_file_read_iter
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"An unfortunately large collection of arm64 fixes for -rc5.
Some of this is absolutely trivial, but the alternatives, vDSO and CPU
errata workaround fixes are significant. At least people are finding
and fixing these things, I suppose.
- Fix workaround for CPU erratum #1418040 to disable the compat vDSO
- Fix Oops when single-stepping with KGDB
- Fix memory attributes for hypervisor device mappings at EL2
- Fix memory leak in PSCI and remove useless variable assignment
- Fix up some comments and asm labels in our entry code
- Fix broken register table formatting in our generated html docs
- Fix missing NULL sentinel in CPU errata workaround list
- Fix patching of branches in alternative instruction sections"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/alternatives: don't patch up internal branches
arm64: Add missing sentinel to erratum_1463225
arm64: Documentation: Fix broken table in generated HTML
arm64: kgdb: Fix single-step exception handling oops
arm64: entry: Tidy up block comments and label numbers
arm64: Rework ARM_ERRATUM_1414080 handling
arm64: arch_timer: Disable the compat vdso for cores affected by ARM64_WORKAROUND_1418040
arm64: arch_timer: Allow an workaround descriptor to disable compat vdso
arm64: Introduce a way to disable the 32bit vdso
arm64: entry: Fix the typo in the comment of el1_dbg()
drivers/firmware/psci: Assign @err directly in hotplug_tests()
drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups()
KVM: arm64: Fix definition of PAGE_HYP_DEVICE
Merge tag 's390-5.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
"This is mainly due to the fact that Gerald Schaefer's and also my old
email addresses currently do not work any longer. Therefore we decided
to switch to new email addresses and reflect that in the MAINTAINERS
file.
- Update email addresses in MAINTAINERS file and add .mailmap entries
for Gerald Schaefer and Heiko Carstens.
- Fix huge pte soft dirty copying"
* tag 's390-5.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: update email address for Gerald Schaefer
MAINTAINERS: update email address for Heiko Carstens
s390/mm: fix huge pte soft dirty copying
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull vkm fixes from Paolo Bonzini:
"Two simple but important bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MIPS: Fix build errors for 32bit kernel
KVM: nVMX: fixes for preemption timer migration
Merge tag 'mmc-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- Override DLL_CONFIG only with valid values in sdhci-msm
- Get rid of of_match_ptr() macro to fix warning in owl-mmc
- Limit segments to 1 to fix meson-gx G12A/G12B SoCs
* tag 'mmc-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-msm: Override DLL_CONFIG only if the valid value is supplied
mmc: owl-mmc: Get rid of of_match_ptr() macro
mmc: meson-gx: limit segments to 1 when dram-access-quirk is needed
io_uring: account user memory freed when exit has been queued
We currently account the memory after the exit work has been run, but
that leaves a gap where a process has closed its ring and until the
memory has been accounted as freed. If the memlocked ulimit is
borderline, then that can introduce spurious setup errors returning
-ENOMEM because the free work hasn't been run yet.
Account this as freed when we close the ring, as not to expose a tiny
gap where setting up a new ring can fail.
Fixes: 85faa7b8346e ("io_uring: punt final io_ring_ctx wait-and-free to workqueue") Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call percpu_ref_exit() on error path to avoid
refcount memleak.
Fixes: 05f3fb3c5397 ("io_uring: avoid ring quiesce for fixed file set unregister and update") Cc: stable@vger.kernel.org Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dan Carpenter [Fri, 10 Jul 2020 11:36:10 +0000 (14:36 +0300)]
xen/xenbus: Fix a double free in xenbus_map_ring_pv()
When there is an error the caller frees "info->node" so the free here
will result in a double free. We should just delete first kfree().
Fixes: 3848e4e0a32a ("xen/xenbus: avoid large structs and arrays on the stack") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200710113610.GA92345@mwanda Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Commit dc6d95b153e78ed70b1b2c04a ("KVM: MIPS: Add more MMIO load/store
instructions emulation") introduced some 64bit load/store instructions
emulation which are unavailable on 32bit platform, and it causes build
errors:
arch/mips/kvm/emulate.c: In function 'kvm_mips_emulate_store':
arch/mips/kvm/emulate.c:1734:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 56) & 0xff);
^
arch/mips/kvm/emulate.c:1738:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 48) & 0xffff);
^
arch/mips/kvm/emulate.c:1742:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 40) & 0xffffff);
^
arch/mips/kvm/emulate.c:1746:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 32) & 0xffffffff);
^
arch/mips/kvm/emulate.c:1796:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 32);
^
arch/mips/kvm/emulate.c:1800:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 40);
^
arch/mips/kvm/emulate.c:1804:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 48);
^
arch/mips/kvm/emulate.c:1808:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 56);
^
cc1: all warnings being treated as errors
make[3]: *** [arch/mips/kvm/emulate.o] Error 1
So, use #if defined(CONFIG_64BIT) && defined(CONFIG_KVM_MIPS_VZ) to
guard the 64bit load/store instructions emulation.
Reported-by: kernel test robot <lkp@intel.com> Fixes: dc6d95b153e78ed70b1b2c04a ("KVM: MIPS: Add more MMIO load/store instructions emulation") Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1594365797-536-1-git-send-email-chenhc@lemote.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 9 Jul 2020 17:12:09 +0000 (13:12 -0400)]
KVM: nVMX: fixes for preemption timer migration
Commit 850448f35aaf ("KVM: nVMX: Fix VMX preemption timer migration",
2020-06-01) accidentally broke nVMX live migration from older version
by changing the userspace ABI. Restore it and, while at it, ensure
that vmx->nested.has_preemption_timer_deadline is always initialized
according to the KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE flag.
Vincent Chen [Tue, 23 Jun 2020 05:37:35 +0000 (13:37 +0800)]
riscv: Avoid kgdb.h including gdb_xml.h to solve unused-const-variable warning
The constant arrays in gdb_xml.h are only used in arch/riscv/kernel/kgdb.c,
but other c files may include the gdb_xml.h indirectly via including the
kgdb.h. Hence, It will cause many unused-const-variable warnings. This
patch makes the kgdb.h not to include the gdb_xml.h to solve this problem.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Vincent Chen [Tue, 23 Jun 2020 05:37:25 +0000 (13:37 +0800)]
kgdb: Move the extern declaration kgdb_has_hit_break() to generic kgdb.h
Currently, only riscv kgdb.c uses the kgdb_has_hit_break() to identify
the kgdb breakpoint. It causes other architectures will encounter the "no
previous prototype" warnings if the compile option has W=1. Moving the
declaration of extern kgdb_has_hit_break() from risc-v kgdb.h to generic
kgdb.h to avoid generating these warnings.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Vincent Chen [Tue, 23 Jun 2020 05:36:59 +0000 (13:36 +0800)]
riscv: enable the Kconfig prompt of STRICT_KERNEL_RWX
Due to lack of hardware breakpoint support, the kernel option
CONFIG_STRICT_KERNEL_RWX should be disabled when using KGDB. However,
CONFIG_STRICT_KERNEL_RWX is always enabled now. Therefore, select
ARCH_OPTIONAL_KERNEL_RWX_DEFAULT to enable CONFIG_STRICT_KERNEL_RWX
by default, and then select ARCH_OPTIONAL_KERNEL_RWX to enable the
Kconfig prompt of CONFIG_STRICT_KERNEL_RWX so that users can turn it off.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Vincent Chen [Tue, 23 Jun 2020 05:36:42 +0000 (13:36 +0800)]
kgdb: enable arch to support XML packet.
The XML packet could be supported by required architecture if the
architecture defines CONFIG_HAVE_ARCH_KGDB_QXFER_PKT and implement its own
kgdb_arch_handle_qxfer_pkt(). Except for the kgdb_arch_handle_qxfer_pkt(),
the architecture also needs to record the feature supported by gdb stub
into the kgdb_arch_gdb_stub_feature, and these features will be reported
to host gdb when gdb stub receives the qSupported packet.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Jakub Bogusz [Thu, 9 Jul 2020 22:57:23 +0000 (15:57 -0700)]
libbpf: Fix libbpf hashmap on (I)LP32 architectures
On ILP32, 64-bit result was shifted by value calculated for 32-bit long type
and returned value was much outside hashmap capacity.
As advised by Andrii Nakryiko, this patch uses different hashing variant for
architectures with size_t shorter than long long.
Eli Britstein [Sun, 28 Jun 2020 12:42:26 +0000 (15:42 +0300)]
net/mlx5e: CT: Fix memory leak in cleanup
CT entries are deleted via a workqueue from netfilter. If removing the
module before that, the rules are cleaned by the driver itself, but the
memory entries for them are not freed. Fix that.
Fixes: ac991b48d43c ("net/mlx5e: CT: Offload established flows") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eran Ben Elisha [Mon, 22 Jun 2020 06:03:31 +0000 (09:03 +0300)]
net/mlx5e: Fix port buffers cell size value
Device unit for port buffers size, xoff_threshold and xon_threshold is
cells. Fix a bug in driver where cell unit size was hard-coded to
128 bytes. This hard-coded value is buggy, as it is wrong for some hardware
versions.
Driver to read cell size from SBCAM register and translate bytes to cell
units accordingly.
In order to fix the bug, this patch exposes SBCAM (Shared buffer
capabilities mask) layout and defines.
If SBCAM.cap_cell_size is valid, use it for all bytes to cells
calculations. If not valid, fallback to 128.
Cell size do not change on the fly per device. Instead of issuing SBCAM
access reg command every time such translation is needed, cache it in
mlx5e_dcbx as part of mlx5e_dcbnl_initialize(). Pass dcbx.port_buff_cell_sz
as a param to every function that needs bytes to cells translation.
While fixing the bug, move MLX5E_BUFFER_CELL_SHIFT macro to
en_dcbnl.c, as it is only used by that file.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Aya Levin [Mon, 15 Jun 2020 09:48:47 +0000 (12:48 +0300)]
net/mlx5e: Fix 50G per lane indication
Some released FW versions mistakenly don't set the capability that 50G
per lane link-modes are supported for VFs (ptys_extended_ethernet
capability bit). When the capability is unset, read
PTYS.ext_eth_proto_capability (always reliable).
If PTYS.ext_eth_proto_capability is valid (has a non-zero value)
conclude that the HCA supports 50G per lane. Otherwise, conclude that
the HCA doesn't support 50G per lane.
Fixes: a08b4ed1373d ("net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Aya Levin [Wed, 20 May 2020 07:37:42 +0000 (10:37 +0300)]
net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash
After function reload, CPU mapping used by aRFS RX is broken, leading to
a kernel panic. Fix by moving initialization of rx_cpu_rmap from
netdev_init to netdev_attach. IRQ table is re-allocated on mlx5_load,
but netdev is not re-initialize.
Aya Levin [Wed, 24 Jun 2020 16:04:03 +0000 (19:04 +0300)]
net/mlx5e: Fix VXLAN configuration restore after function reload
When detaching netdev, remove vxlan port configuration using
udp_tunnel_drop_rx_info. During function reload, configuration will be
restored using udp_tunnel_get_rx_info. This ensures sync between
firmware and driver. Use udp_tunnel_get_rx_info even if its physical
interface is down.
Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Vlad Buslov [Wed, 17 Jun 2020 14:51:53 +0000 (17:51 +0300)]
net/mlx5e: Fix usage of rcu-protected pointer
In mlx5e_configure_flower() flow pointer is protected by rcu read lock.
However, after cited commit the pointer is being used outside of rcu read
block. Extend the block to protect all pointer accesses.
Fixes: 553f9328385d ("net/mlx5e: Support tc block sharing for representors") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Vlad Buslov [Wed, 17 Jun 2020 14:26:33 +0000 (17:26 +0300)]
net/mxl5e: Verify that rpriv is not NULL
In helper function is_flow_rule_duplicate_allowed() verify that rpviv
pointer is not NULL before dereferencing it. This can happen when device is
in NIC mode and leads to following crash:
Eran Ben Elisha [Sun, 14 Jun 2020 14:31:26 +0000 (17:31 +0300)]
net/mlx5: Fix eeprom support for SFP module
Fix eeprom SFP query support by setting i2c_addr, offset and page number
correctly. Unlike QSFP modules, SFP eeprom params are as follow:
- i2c_addr is 0x50 for offset 0 - 255 and 0x51 for offset 256 - 511.
- Page number is always zero.
- Page offset is always relative to zero.
As part of eeprom query, query the module ID (SFP / QSFP*) via helper
function to set the params accordingly.
In addition, change mlx5_qsfp_eeprom_page() input type to be u16 to avoid
unnecessary casting.
Fixes: a708fb7b1f8d ("net/mlx5e: ethtool, Add support for EEPROM high pages query") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Merge tag 'drm-fixes-2020-07-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"I've been off most of the week, but some fixes have piled up. Seems a
bit busier than last week, but they are pretty spread out across a
bunch of drivers, none of them seem that big or worried me too much.
amdgpu:
- Fix a suspend/resume issue with PSP
- Backlight fix for Renoir
- Fix for gpu recovery debugging
* tag 'drm-fixes-2020-07-10' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm/amdgpu: don't do soft recovery if gpu_recovery=0
drm/radeon: fix double free
drm/amd/display: add dmcub check on RENOIR
drm/amdgpu: add TMR destory function for psp
drm/amdgpu: asd function needs to be unloaded in suspend phase
drm/hisilicon/hibmc: Move drm_fbdev_generic_setup() down to avoid the splat
drm/nouveau/nouveau: fix page fault on device private memory
drm/nouveau/svm: fix migrate page regression
drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout
drm/nouveau/kms/nv50-: bail from nv50_audio_disable() early if audio not enabled
drm/i915/gt: Pin the rings before marking active
drm/i915: Also drop vm.ref along error paths for vma construction
drm/i915: Drop vm.ref for duplicate vma on construction
drm/i915/fbc: Fix fence_y_offset handling
drm/i915: Skip stale object handle for debugfs per-file-stats
drm/mediatek: mtk_hdmi: Remove debug messages for function calls
drm/mediatek: mtk_mt8173_hdmi_phy: Remove unnused const variables
drm/mediatek: Delete not used of_device_get_match_data
drm/mediatek: Remove unnecessary conversion to bool
drm/meson: viu: fix setting the OSD burst length in VIU_OSD1_FIFO_CTRL_STAT
...
While raising the gcc version requirement to 4.9, the compile-time check
in the unroll macro was accidentally changed from being used on gcc and
clang to being used on clang only.
Restore the gcc check, changing it from "gcc >= 4.7" to "all gcc".
[ We should probably remove this all entirely: if we remove the check
for CLANG, then the check for GCC can go away. Older versions of clang
are not really appropriate or supported for kernel builds - Linus ]
Fixes: 6ec4476ac825 ("Raise gcc version requirement to 4.9") Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.eti.br> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-Wtype-limits is included in -Wextra which is added at W=1. It warns
(among other things) that 'comparison of an unsigned variable `< 0` is
always false. This causes noisy warnings, especially when used in
macros, hence it is more suitable for W=2.
Cong Wang [Thu, 9 Jul 2020 23:28:44 +0000 (16:28 -0700)]
cgroup: Fix sock_cgroup_data on big-endian.
In order for no_refcnt and is_data to be the lowest order two
bits in the 'val' we have to pad out the bitfield of the u8.
Fixes: ad0f75e5f57c ("cgroup: fix cgroup_sk_alloc() for sk_clone_lock()") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour.
In the first case, the tests check that detaching without giving
a program succeeds. Since these are not the desired semantics,
invert the condition. In the second case, the clean up code doesn't
supply the necessary program fds.
Fixes: bb0de3131f4c ("bpf: sockmap: Require attach_bpf_fd when detaching a program") Reported-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com
Dave Airlie [Thu, 9 Jul 2020 21:01:24 +0000 (07:01 +1000)]
Merge tag 'drm-intel-fixes-2020-07-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
One display's fbc patch fixing fence_y_offset calculation
from Ville and 4 patches from Chris on GEM: 1 fixing a debugfs
panic and others fixing vma construction and pin under vm->mutex.
projects / thirdparty / linux.git / log
