Dave Anglin [Mon, 8 Sep 2008 00:54:26 +0000 (00:54 +0000)]
* config/tc-hppa.h (DIFF_EXPR_OK): Define for SOM target. Revise
comment regarding use of difference expressions.
(TC_FORCE_RELOCATION_SUB_LOCAL): Define to 1.
Alan Modra [Sun, 7 Sep 2008 04:02:31 +0000 (04:02 +0000)]
* ldlang.h (lang_output_section_find): Define.
(lang_output_section_statement_lookup): Update prototype.
* ldlang.c (lang_output_section_find,
lang_output_section_statement_lookup_1): Merge into..
(lang_output_section_statement_lookup): ..here. Update all callers.
(process_insert_statements): Set constraint negative
for output section statements we might be inserting. Make error
fatal on not finding insertion section.
(lang_output_section_find): Rather than comparing
output_section_statement.constraint against -1, test whether
it is postive.
(lang_output_section_statement_lookup_1): Likewise.
(output_prev_sec_find, strip_excluded_output_sections): Likewise.
(lang_record_phdrs): Likewise.
* emultempl/elf32.em (output_rel_find): Likewise.
* NEWS: Mention INSERT.
* readelf.c (load_specific_debug_section): New function, from
load_debug_section.
(load_debug_section): Use load_specific_debug_section.
(display_debug_section): Use load_specific_debug_section. Check for
multiple sections with the same name.
* target.c (update_current_target): Do not inherit to_open
or to_close.
(pop_target): Call target_close on target_stack instead
of current_target.
(pop_all_targets_above): Likewise.
* mep-tdep.c (struct mep_prologue): Add gdbarch member.
(check_for_saved): Use it instead of current_gdbarch.
(is_arg_spill): Add gdbarch paramter. Use it instead
of current_gdbarch.
(mep_analyze_prologue): Add gdbarch parameter. Pass it
to is_arg_spill and check_for_saved.
(mep_skip_prologue, mep_analyze_frame_prologue): Update calls.
* mips-tdep.c (gdb_print_insn_mips): Do not check mips_abi
from current_gdbarch.
(gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): New functions.
(mips_gdbarch_init): Install them instead of gdb_print_insn_mips
depending on mips_abi.
* breakpoint.h (struct bp_location): Change type of section
member to "struct obj_section *".
* tracepoint.h (struct tracepoint): Likewise.
* symtab.h (struct general_symbol_info): Replace bfd_section
member with obj_section.
(struct symtab_and_line): Change type of section member to
"struct obj_section *".
(SYMBOL_BFD_SECTION): Remove macro, replace by ...
(SYMBOL_OBJ_SECTION): ... this.
* minsym.c (prim_record_minimal_symbol_and_info): Record symbol
section as obj_section instead of bfd_section.
* ada-lang.c (ada_decode_symbol): Use gsymbol->obj_section
directly instead of looking of obj_section from bfd_section.
* mach-o.c (N_TEXT, N_DATA, N_BSS): Added.
(bfd_mach_o_version): New function.
(bfd_mach_o_valid): Handle 64bits cpus.
(bfd_mach_o_write_header): handler 64bits headers.
(bfd_mach_o_scan_write_section_32, bfd_mach_o_scan_write_section_64):
New functions (from bfd_mach_o_scan_write_section) to handle both
flavors.
(bfd_mach_o_scan_write_segment): Parameter wide added to support
both flavors.
(bfd_mach_o_write_contents): Support both flavors.
(bfd_mach_o_read_header): Ditto.
(bfd_mach_o_scan_read_section_32, bfd_mach_o_scan_read_section_64):
New functions (from bfd_mach_o_scan_read_section) to support both
flavors.
(bfd_mach_o_scan_read_symtab_symbol): Support both flavors.
(bfd_mach_o_scan_read_symtab): Ditto.
(bfd_mach_o_scan_read_segment): Parameter wide added to support
both flavors.
(bfd_mach_o_scan_read_segment_32, bfd_mach_o_scan_read_segment_64):
New functions to call bfd_mach_o_scan_read_segment.
(bfd_mach_o_flatten_sections): Support both flavors.
(bfd_mach_o_scan_start_address): Ditto.
(bfd_mach_o_scan): Ditto.
(bfd_mach_o_lookup_section): Ditto.
* defs.h (plongest,pulongest): Renamed from paddr_u,paddr_d.
Change argument of pulongest from CORE_ADDR to ULONGEST.
All callers updated.
* utils.c (plongest): Renamed from paddr_d.
(pulongest): Renamed from paddr_u, change arg type to ULONGEST.
* remote-mips.c (send_srec): Use paddr_nz instead of paddr_u in
`CORE_ADDR addr' arg of error message.
Nick Clifton [Wed, 3 Sep 2008 14:02:30 +0000 (14:02 +0000)]
* config/tc-i386.c (pe_lcomm_internal): New function. Allows the
alignment field of the .lcomm directive to be optional.
(pe_lcomm): New function. Pass pe_lcomm_internal to
s_comm_internal.
(md_pseudo_table): Implement .lcomm directive for COFF based
targets.
* doc/c-i386.texi (i386-Directives): New node. Used to document
the .lcomm directive.
* breakpoint.c (breakpoint_init_inferior): Mark as not inserted only
non-permanent breakpoints.
(bpstat_stop_status): Change enable_state to bp_disabled only for
non-permanent breakpoints.
(bp_loc_is_permanent): New function.
(create_breakpoint): Check if the location points to a permanent
breakpoint and if it does, make breakpoint permanent.
(update_breakpoint_locations): Make sure new locations of permanent
breakpoints are properly initialized.
* i386-tdep.c (i386_skip_permanent_breakpoint): New function.
(i386_gdbarch_init): Set gdbarch_skip_permanent_breakpoint.
Jan Kratochvil [Mon, 1 Sep 2008 22:24:05 +0000 (22:24 +0000)]
Stay compatible after the GCC PR fortran/29635 fix.
* dwarf2read.c (process_die <DW_TAG_imported_module>)
(process_die <DW_TAG_imported_module>): Do not assert anything about
these unsupported tags.
Jan Beulich [Thu, 28 Aug 2008 09:42:11 +0000 (09:42 +0000)]
gas/
2008-08-28 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (md_assemble): Force number of displacement
operands to zero when processing string instruction.
(i386_index_check): Special-case string instruction operands. Don't
fudge address prefix if there already was a memory operand. Fix
error message to correctly reflect the addressing mode used.
(i386_att_operand): Fix comment.
(i386_intel_operand): Snapshot, clear, and restore base and index
reg for each operand processed. Increment count of memory operands
later.
gas/testsuite/
2008-08-28 Jan Beulich <jbeulich@novell.com>
* gas/i386/string-bad.{l,s}, gas/i386/string-ok.{d,e,s}: New.
* gas/i386/i386.exp: Run new tests.
Dave Anglin [Thu, 28 Aug 2008 02:33:45 +0000 (02:33 +0000)]
* elf-hppa.h (elf_hppa_reloc_final_type): Handle R_PARISC_GPREL64,
R_PARISC_SEGREL32 and R_PARISC_SEGREL64.
* som.c (som_fixup_formats): Add R_DATA_GPREL fixup.
(som_hppa_howto_table): Likewise.
(hppa_som_gen_reloc_type): In case R_HPPA_GOTOFF, detect R_DATA_GPREL
final type.
(som_write_fixups): Handle R_DATA_GPREL.
* config/tc-hppa.c (is_SB_relative): New macro.
(fix_new_hppa): Remove $segrel$ marker.
(cons_fix_new_hppa): Set reloc type R_PARISC_SEGREL32 if expression is
segment relative.
* config/tc-hppa.h (tc_frob_symbol): Check for $segrel$.
Ulrich Weigand [Tue, 26 Aug 2008 17:40:25 +0000 (17:40 +0000)]
* dummy-frame.h (dummy_frame_pop): Add prototype.
* dummy-frame.c: Include "observer.h".
(dummy_frame_push): Do not check for stale frames.
(dummy_frame_pop): New function.
(cleanup_dummy_frames): New function.
(_initialize_dummy_frame): Install it as inferior_created observer.
* frame.h (struct frame_id): Update comments.
(frame_id_inner): Remove prototype.
* frame.c (frame_id_inner): Make static. Add comments.
(frame_find_by_id): Update frame_id_inner safety net check to avoid
false positives for targets using non-contiguous stack ranges.
(get_prev_frame_1): Update frame_id_inner safety net check.
(frame_pop): Call dummy_frame_pop when popping a dummy frame.
* stack.c (return_command): Directly pop the selected frame.
* infrun.c (handle_inferior_event): Remove dead code.
* i386-tdep.c (i386_push_dummy_call): Update comment.
Ulrich Weigand [Tue, 26 Aug 2008 17:33:51 +0000 (17:33 +0000)]
* solib-svr4.c (read_program_header): New function.
(scan_dyntag_auxv): New function.
(elf_locate_base): Use it if scan_dyntag fails.
(find_program_interpreter): New function.
(enable_break): Use it instead of .interp section.
Luis Machado [Tue, 26 Aug 2008 15:16:41 +0000 (15:16 +0000)]
* ppc-linux-tdep.c (ppc_linux_vsx_regset_sections) New structure.
(ppc_linux_vmx_regset_sections): New structure.
(ppc_linux_fp_regset_sections): New structure.
(ppc_linux_init_abi): Select core-file regset based on target
features.
Nick Clifton [Tue, 26 Aug 2008 11:11:17 +0000 (11:11 +0000)]
PR 6727
* emultempl/armelf.em (arm_elf_set_bfd_for_interworking): Scan all
input sections in all input bfds and always select the last
suitable one, so that interworking stubs are always processed
after all other input sections.
(arm_elf_before_allocation): Remove redundant use of
output_has_begun flag.
testsuite/
* gas/bfin/arith_mode.d: New test.
* gas/bfin/arith_mode.s: New test.
* gas/bfin/invalid_arith_mode.l: New test.
* gas/bfin/invalid_arith_mode.s: New test.
* gas/bfin/bfin.exp: Add arith_mode and invalid_arith_mode.
projects / thirdparty / binutils-gdb.git / log
