Pierre Habouzit [Wed, 7 Nov 2007 10:20:27 +0000 (11:20 +0100)]
parse-options new features.
options flags:
~~~~~~~~~~~~~
PARSE_OPT_NONEG allow the caller to disallow the negated option to exists.
option types:
~~~~~~~~~~~~
OPTION_BIT: ORs (or NANDs) a mask.
OPTION_SET_INT: force the value to be set to this integer.
OPTION_SET_PTR: force the value to be set to this pointer.
helper:
~~~~~~
HAS_MULTI_BITS (in git-compat-util.h) is a bit-hack to check if an
unsigned integer has more than one bit set, useful to check if conflicting
options have been used.
Signed-off-by: Pierre Habouzit <madcoder@debian.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 11 Nov 2007 23:00:05 +0000 (15:00 -0800)]
Merge branch 'maint'
* maint:
fix index-pack with packs >4GB containing deltas on 32-bit machines
git-hash-object should honor config variables
gitweb: correct month in date display for atom feeds
Nicolas Pitre [Sun, 11 Nov 2007 04:29:10 +0000 (23:29 -0500)]
fix index-pack with packs >4GB containing deltas on 32-bit machines
This probably hasn't been properly tested before. Here's a script to
create a 8GB repo with the necessary characteristics (copy the
test-genrandom executable from the Git build tree to /tmp first):
-----
#!/bin/bash
git init
git config core.compression 0
# create big objects with no deltas
for i in $(seq -w 1 2 63)
do
echo $i
/tmp/test-genrandom $i 268435456 > file_$i
git add file_$i
rm file_$i
echo "file_$i -delta" >> .gitattributes
done
# create "deltifiable" objects in between big objects
for i in $(seq -w 2 2 64)
do
echo "$i $i $i" >> grow
cp grow file_$i
git add file_$i
rm file_$i
done
rm grow
# create a pack with them
git commit -q -m "commit of big objects interlaced with small deltas"
git repack -a -d
-----
Then clone this repo over the Git protocol.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michele Ballabio [Sat, 10 Nov 2007 14:17:25 +0000 (15:17 +0100)]
test-lib.sh: move error line after error() declaration
This patch removes a spurious "command not found" error
and actually makes the "Test script did not set test_description."
string follow the command line option "--no-color".
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 9 Nov 2007 01:21:48 +0000 (17:21 -0800)]
Documentation: lost-found is now deprecated.
This makes it possible to mark commands that are deprecated in the
command list of the primary manual page git(7), and uses it to
mark "git lost-found" and "git tar-tree" as deprecated.
Junio C Hamano [Fri, 9 Nov 2007 08:21:44 +0000 (00:21 -0800)]
Merge branch 'maint'
* maint:
Start preparing for 1.5.3.6
git-send-email: Change the prompt for the subject of the initial message.
SubmittingPatches: improve the 'Patch:' section of the checklist
instaweb: Minor cleanups and fixes for potential problems
stop t1400 hiding errors in tests
Makefile: add missing dependency on wt-status.h
refresh_index_quietly(): express "optional" nature of index writing better
Fix sed string regex escaping in module_name.
Avoid a few unportable, needlessly nested "...`...".
git-mailsplit: with maildirs not only process cur/, but also new/
Sergei Organov [Thu, 8 Nov 2007 16:40:25 +0000 (19:40 +0300)]
SubmittingPatches: improve the 'Patch:' section of the checklist
There were 2 items "send patch to..." but having different set of
addresses to send patch to. Merge them together and move the resulting
item to the end of checklist.
Signed-off-by: Sergei Organov <osv@javad.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 9 Nov 2007 00:24:00 +0000 (16:24 -0800)]
refresh_index_quietly(): express "optional" nature of index writing better
The point of the part of the code this patch touches is that if
we modified the active_cache, we try to write it out and make it
the index file for later users to use by calling
"commit_locked_index", but we do not really care about the
failure from this sequence because it is done purely as an
optimization.
The original code called three functions primarily for their
side effects but as condition of an if statement, which is
admittedly a bad style.
Incidentally, it squelches an "empty if body" warning from gcc.
Ralf Wildenhues [Thu, 8 Nov 2007 21:48:49 +0000 (22:48 +0100)]
Fix sed string regex escaping in module_name.
When escaping a string to be used as a sed regex, it is important
to only escape active characters. Escaping other characters is
undefined according to POSIX, and in practice leads to issues with
extensions such as GNU sed's \+.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gerrit Pape [Thu, 8 Nov 2007 09:47:39 +0000 (09:47 +0000)]
hooks--update: decline deleting tags or branches by default, add config options
Decline deleting tags or branches through git push <remote> :<ref> by
default, support config options hooks.allowdeletetag, hooks.allowdeletebranch
to override this per repository.
Before this patch the update hook interpreted deleting a tag, no matter if
annotated or not, through git push <remote> :<tag> as unannotated tag, and
declined it by default, but with an unappropriate error message:
$ git push origin :atag
deleting 'refs/tags/atag'
*** The un-annotated tag, atag, is not allowed in this repository
*** Use 'git tag [ -a | -s ]' for tags you want to propagate.
ng refs/tags/atag hook declined
error: hooks/update exited with error code 1
error: hook declined to update refs/tags/atag
error: failed to push to 'monolith:/git/qm/test-repo'
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gerrit Pape [Thu, 8 Nov 2007 14:02:00 +0000 (14:02 +0000)]
hooks--update: fix test for properly set up project description file
The update hook template intends to abort if the project description file
hasn't been adjusted or is empty. This patch fixes the check for 'being
adjusted'.
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gerrit Pape [Tue, 6 Nov 2007 08:54:18 +0000 (08:54 +0000)]
git-mailsplit: with maildirs not only process cur/, but also new/
When saving patches to a maildir with e.g. mutt, the files are put into
the new/ subdirectory of the maildir, not cur/. This makes git-am state
"Nothing to do.". This patch lets git-mailsplit additional check new/
after reading cur/.
This was reported by Joey Hess through
http://bugs.debian.org/447396
Signed-off-by: Gerrit Pape <pape@smarden.org> Acked-by: Jeff King <peff@peff.net> Acked-by: Alex Riesen <raa.lkml@gmail.com> Acked-by: Fernando J. Pereda <ferdy@gentoo.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 8 Nov 2007 01:37:00 +0000 (17:37 -0800)]
Merge branch 'mh/work-tree'
* mh/work-tree:
Make git-blame fail when working tree is needed and we're not in one
Don't always require working tree for git-rm
Use setup_work_tree() in builtin-ls-files.c
Refactor working tree setup
Ralf Wildenhues [Tue, 6 Nov 2007 20:12:45 +0000 (21:12 +0100)]
Fix minor nits in configure.ac
Avoid "test -o" as it is only XSI not POSIX, and not portable.
Avoid exit(3) in test programs in favor of return, to accommodate
for newer Autoconf not providing a declaration for exit.
David Symonds [Wed, 7 Nov 2007 03:24:28 +0000 (14:24 +1100)]
Improve accuracy of check for presence of deflateBound.
ZLIB_VERNUM isn't defined in some zlib versions, so this patch does a proper
linking test in autoconf to see whether deflateBound exists in zlib. Also,
setting NO_DEFLATE_BOUND will also work for folk not using autoconf.
Signed-off-by: David Symonds <dsymonds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if our code is quite a good documentation for our coding style,
some people seem to prefer a document describing it.
The part about the shell scripts is clearly just copied from one of
Junio's helpful mails, and some parts were added from comments by
Junio, Andreas Ericsson and Robin Rosenberg.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mike Hommey [Sat, 3 Nov 2007 11:23:13 +0000 (12:23 +0100)]
Don't always require working tree for git-rm
This allows to do git rm --cached -r directory, instead of
git ls-files -z directory | git update-index --remove -z --stdin.
This can be particularly useful for git-filter-branch users.
Signed-off-by: Mike Hommey <mh@glandium.org> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mike Hommey [Sat, 3 Nov 2007 11:23:12 +0000 (12:23 +0100)]
Use setup_work_tree() in builtin-ls-files.c
Signed-off-by: Mike Hommey <mh@glandium.org> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mike Hommey [Sat, 3 Nov 2007 11:23:11 +0000 (12:23 +0100)]
Refactor working tree setup
Create a setup_work_tree() that can be used from any command requiring
a working tree conditionally.
Signed-off-by: Mike Hommey <mh@glandium.org> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sun, 4 Nov 2007 19:46:48 +0000 (20:46 +0100)]
upload-pack: Use finish_{command,async}() instead of waitpid().
upload-pack spawns two processes, rev-list and pack-objects, and carefully
monitors their status so that it can report failure to the remote end.
This change removes the complicated procedures on the grounds of the
following observations:
- If everything is OK, rev-list closes its output pipe end, upon which
pack-objects (which reads from the pipe) sees EOF and terminates itself,
closing its output (and error) pipes. upload-pack reads from both until
it sees EOF in both. It collects the exit codes of the child processes
(which indicate success) and terminates successfully.
- If rev-list sees an error, it closes its output and terminates with
failure. pack-objects sees EOF in its input and terminates successfully.
Again upload-pack reads its inputs until EOF. When it now collects
the exit codes of its child processes, it notices the failure of rev-list
and signals failure to the remote end.
- If pack-objects sees an error, it terminates with failure. Since this
breaks the pipe to rev-list, rev-list is killed with SIGPIPE.
upload-pack reads its input until EOF, then collects the exit codes of
the child processes, notices their failures, and signals failure to the
remote end.
- If upload-pack itself dies unexpectedly, pack-objects is killed with
SIGPIPE, and subsequently also rev-list.
The upshot of this is that precise monitoring of child processes is not
required because both terminate if either one of them dies unexpectedly.
This allows us to use finish_command() and finish_async() instead of
an explicit waitpid(2) call.
The change is smaller than it looks because most of it only reduces the
indentation of a large part of the inner loop.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 6 Nov 2007 06:03:47 +0000 (22:03 -0800)]
Merge branch 'maint'
* maint:
Remove a couple of duplicated include
grep with unmerged index
git-daemon: fix remote port number in log entry
git-svn: t9114: verify merge commit message in test
git-svn: fix dcommit clobbering when committing a series of diffs
Junio C Hamano [Tue, 6 Nov 2007 01:16:47 +0000 (17:16 -0800)]
grep with unmerged index
We called flush_grep() every time we saw an unmerged entry in
the index. If we happen to find an unmerged entry before we saw
more than two paths, we incorrectly declared that the user had
too many non-paths options in front.
Junio C Hamano [Tue, 6 Nov 2007 00:39:00 +0000 (16:39 -0800)]
gc: --prune prunes unreferenced objects.
Brandon Casey correctly points out that we repack with -A without --prune
and with -a with --prune, so it is not just unreferenced loose objects
that are pruned away when the option is given.
Eric Wong [Mon, 5 Nov 2007 11:21:47 +0000 (03:21 -0800)]
git-svn: fix dcommit clobbering when committing a series of diffs
Our revision number sent to SVN is set to the last revision we
committed if we've made any previous commits in a dcommit
invocation.
Although our SVN Editor code uses the delta of two (old) trees
to generate information to send upstream, it'll still send
complete resultant files upstream; even if the tree they're
based against is out-of-date.
The combination of sending a file that does not include the
latest changes, but set with a revision number of a commit we
just made will cause SVN to accept the resultant file even if it
was generated against an old tree.
More trouble was caused when fixing this because we were
rebasing uncessarily at times. We used git-diff-tree to check
the imported SVN revision against our HEAD, not the last tree we
committed to SVN. The unnecessary rebasing caused merge commits
upstream to SVN to fail.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split off the pretty print stuff into its own file
The file commit.c got quite large, but it does not have to be: the
code concerning pretty printing is pretty well contained. In fact,
this commit just splits it off into pretty.c, leaving commit.c with
just 672 lines.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 2 Nov 2007 00:32:04 +0000 (17:32 -0700)]
clean: require -f to do damage by default
This makes the clean.requireForce configuration default to true.
Too many people are burned by typing "git clean" by mistake when
they meant to say "make clean".
Junio C Hamano [Sun, 4 Nov 2007 08:28:46 +0000 (01:28 -0700)]
Merge branch 'jc/format-patch-encoding'
* jc/format-patch-encoding:
test format-patch -s: make sure MIME content type is shown as needed
format-patch -s: add MIME encoding header if signer's name requires so
Junio C Hamano [Sun, 4 Nov 2007 08:10:08 +0000 (01:10 -0700)]
Merge branch 'jn/gitweb'
* jn/gitweb:
gitweb: Use config file for repository description and URLs
gitweb: Read repo config using 'git config -z -l'
gitweb: Add tests for overriding gitweb config with repo config
gitweb: Use href(-replay=>1, action=>...) to generate alternate views
gitweb: Use href(-replay=>1, page=>...) to generate pagination links
gitweb: Easier adding/changing parameters to current URL
gitweb: Remove CGI::Carp::set_programname() call from t9500 gitweb test
gitweb: Add 'status_str' to parse_difftree_raw_line output
gitweb: Always set 'from_file' and 'to_file' in parse_difftree_raw_line
git-reset: do not be confused if there is nothing to reset
The purpose of the function update_index_from_diff() (which is the
callback function we give do_diff_cache()) is to update those index
entries which differ from the given commit.
Since do_diff_cache() plays games with the in-memory index, this function
discarded the cache and reread it.
Then, back in the function read_from_tree() we wrote the index.
Of course, this broke down when there were no changes and
update_index_from_diff() was not called, and therefore the mangled index
was not discarded.
The solution is to move the index writing into the function
update_index_from_diff().
Noticed by Björn Steinbrink.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gerrit Pape [Sat, 3 Nov 2007 11:55:02 +0000 (11:55 +0000)]
git-cvsimport: really convert underscores in branch names to dots with -u
The documentation states for the -u option that underscores in tag and
branch names are converted to dots, but this was actually implemented
for the tag names only.
Kurt Roeckx reported this through
http://bugs.debian.org/446495
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
J. Bruce Fields [Sat, 3 Nov 2007 02:39:44 +0000 (22:39 -0400)]
errors: "strict subset" -> "ancestor"
The term "ancestor" is a bit more intuitive (and more consistent with
the documentation) than the term "strict subset".
Also, remove superfluous "ref", capitalize, and add some carriage
returns, changing:
error: remote 'refs/heads/master' is not a strict subset of local ref 'refs/heads/master'. maybe you are not up-to-date and need to pull first?
error: failed to push to 'ssh://linux-nfs.org/~bfields/exports/git.git'
to:
error: remote 'refs/heads/master' is not an ancestor of
local 'refs/heads/master'.
Maybe you are not up-to-date and need to pull first?
error: failed to push to 'ssh://linux-nfs.org/~bfields/exports/git.git'
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nicolas Pitre [Sat, 3 Nov 2007 05:32:48 +0000 (01:32 -0400)]
git-fetch: more terse fetch output
This makes the fetch output much more terse and prettier on a 80 column
display, based on a consensus reached on the mailing list. Here's an
example output:
Receiving objects: 100% (5439/5439), 1.60 MiB | 636 KiB/s, done.
Resolving deltas: 100% (4604/4604), done.
From git://git.kernel.org/pub/scm/git/git
! [rejected] html -> origin/html (non fast forward) 136e631..f45e867 maint -> origin/maint (fast forward) 9850e2e..44dd7e0 man -> origin/man (fast forward) 3e4bb08..e3d6d56 master -> origin/master (fast forward) fa3665c..536f64a next -> origin/next (fast forward)
+ 4f6d9d6...768326f pu -> origin/pu (forced update)
* [new branch] todo -> origin/todo
Some portions of this patch have been extracted from earlier proposals
by Jeff King and Shawn Pearce.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Fri, 2 Nov 2007 23:41:20 +0000 (00:41 +0100)]
gitweb: Use config file for repository description and URLs
Allow to use configuration variable gitweb.description for repository
description if there is no $GIT_DIR/description file, and multivalued
configuration variable gitweb.url for URLs of a project (to clone or
fetch from) if there is no $GIT_DIR/cloneurl file.
While repository description is shown in the projects list page, so it
is better to use file and not config variable for performance, it is I
think better to use gitweb.url for URLs (as it is shown only on
project summary page).
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
