arm64: dts: qcom: msm8976: Add restart node

Add a pshold restart node what can be found in downstream for
enable to perform restart operations.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20240807-pshold-v1-1-0fa7927e99ce@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: add CPU idle states

Add CPU idle-state nodes and power-domains to the .dtsi for SA8775P.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240807-sa8775p-idle-states-v1-1-f2b5fcdfa0b0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-yoga: Update panel bindings

Use the correct panel compatible, and wire up enable-gpio.  It is wired
up in the same way as the x1e80100-crd.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20240806202218.9060-1-robdclark@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-gt58: Enable the touchkeys

The tablet has two capacitive buttons on the scren bezel. Enable them by
adding the keycodes in the dt.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240806-msm8916-gt58-tkey-v1-1-8987b06c5921@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-x13s: Enable RGB sensor

Enable the main RGB sensor on the Lenovo x13s a five megapixel 2 lane DPHY
MIPI sensor connected to cisphy0.

With the pm8008 patches recently applied to the x13s dtsi we can now also
enable the RGB sensor. Once done we have all upstream support necessary for
the RGB sensor on x13s.

Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240806-b4-linux-next-24-07-31-camss-sc8280xp-lenovo-rgb-v2-v3-1-199767fb193d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p-ride: enable remoteprocs

Enable all remoteproc nodes on the sa8775p-ride board and point to the
appropriate firmware files.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240805-topic-sa8775p-iot-remoteproc-v4-6-86affdc72c04@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes

Add nodes for remoteprocs: ADSP, CDSP0, CDSP1, GPDSP0 and GPDSP1 for
SA8775p SoCs.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
[Ling: added the fastrcp nodes]
Co-developed-by: Ling Xu <quic_lxu5@quicinc.com>
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
[Bartosz: ported to mainline]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240805-topic-sa8775p-iot-remoteproc-v4-5-86affdc72c04@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: mailbox: qcom-ipcc: Add GPDSP0 and GPDSP1 clients

Add GPDSP0 and GPDSP1 clients for SA8775p platform.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240805-topic-sa8775p-iot-remoteproc-v4-2-86affdc72c04@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-j3ltetw: Add initial device tree

The dts and dtsi add support for msm8916 variant of Samsung Galaxy J3
SM-J320YZ smartphone released in 2016.

Add a device tree for SM-J320YZ with initial support for:

- GPIO keys
- SDHCI (internal and external storage)
- USB Device Mode
- UART (on USB connector via the SM5703 MUIC)
- WCNSS (WiFi/BT)
- Regulators
- QDSP6 audio
- Speaker/earpiece/headphones/microphones via digital/analog codec in
  MSM8916/PM8916
- WWAN Internet via BAM-DMUX
- Touchscreen
- Accelerometer

There are different variants of J3, with some differences in MUIC, sensor,
NFC and touch key I2C buses.

The common parts are shared in msm8916-samsung-j3-common.dtsi to reduce
duplication.

Signed-off-by: Lin, Meng-Bo <linmengbo06890@proton.me>
Link: https://lore.kernel.org/r/20240804065854.42437-3-linmengbo06890@proton.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: qcom: Document samsung,j3ltetw

Document samsung,j3ltetw bindings used in its device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo06890@proton.me>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240804065854.42437-2-linmengbo06890@proton.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: add refgen regulator

On SM8350 platform the DSI internally is using the refgen regulator. Add
corresponding device node and link it as a supply to the DSI node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-10-1149dd8399fe@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: add MDSS registers interconnect

Aside from the MDSS<->MEM interconnect, display devices have separate
interconnect for register access. Add this interconnect to the display
node.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-9-1149dd8399fe@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm7125-xiaomi-common: Add reset-gpios for ufs_mem_hc

The SC7180/SM7125 SoCs have a special pin for UFS reset. Generally, this
pin is the same for all devices on the same SoC because it is hardcoded
in the pinctrl driver. Therefore, it might seem appropriate to add this
pin configuration in sc7180.dtsi. However, this pin is defined in the
device-specific DTS files instead of the SoC-level DTS files in all
Qualcomm DTS. To maintain consistency with this approach, we will follow
the same style.

Add reset-gpios to ufs_mem_hc.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20240731182412.27966-1-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: Add CPU and LLCC BWMON

Add CPU and LLCC BWMON nodes and their corresponding opp tables for
SA8775p SoC.
SA8775p has two cpu clusters, with each cluster having a set of
CPU-to-LLCC BWMON registers. Consequently, there are two sets of
CPU-to-LLCC registers.

Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240730-add_sa8775p_bwmon-v1-2-f4f878da29ae@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash

The phone has a Silergy SY7802 flash LED controller.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20240729-sy7802-v6-1-86bb9083e40b@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: add generic compat string to RPM glink channels

Add the generic qcom,smd-rpm / qcom,glink-smd-rpm compatible to RPM
nodes to follow the schema.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240729-fix-smd-rpm-v2-5-0776408a94c5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdx75-idp: enable MPSS remoteproc node

Enable MPSS remoteproc node on sdx75-idp platform.

Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240709064924.325478-6-quic_nainmeht@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdx75: Add remoteproc node

Add MPSS remoteproc node for SDX75 SoC.

Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240709064924.325478-5-quic_nainmeht@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdx75: update reserved memory regions for mpss

Rename qdss@88800000 memory region as qlink_logging memory region
and add qdss_mem memory region at address of 0x88500000,
qlink_logging is being added at the memory region at the address
of 0x88800000 as the region is being used by modem firmware.
Since different DSM region size is required for different modem
firmware, split mpss_dsmharq_mem region into 2 separate regions.
This would provide the flexibility to remove the region which is
not required for a particular platform. Based on the modem firmware
either both the regions have to be used or only mpss_dsm_mem has
to be used. Also, reduce the size of mpssadsp_mem region.

Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240709064924.325478-4-quic_nainmeht@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8295p-adp: Enable the four USB Type-A ports

The multiport USB controller in the SA8295P ADP is connected to four USB
Type-A ports. VBUS for each of these ports are provided by a
TPS2559QWDRCTQ1 regulator, controlled from PMIC GPIOs.

Add the necessary regulators and GPIO configuration to power these.

It seems reasonable that these regulators should be referenced as vbus
supply of usb-a-connector nodes and controlled by e.g. dwc3, but as this
is not supported in Linux today the regulators are left always-on for
now.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240707085624.3411961-1-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: x1e80100-qcp: fix wsa soundwire port mapping

Existing way of allocating ports dynamically is linear starting from 1 to
MAX_PORTS. This will not work for x1e80100 as the master ports are
are not mapped in the same order.

Without this fix only one speaker in a pair of speakers will function.

After this fix along with WSA codec changes both the speakers starts
working.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240626-port-map-v2-6-6cc1c5608cdd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: x1e80100-crd: fix wsa soundwire port mapping

Existing way of allocating ports dynamically is linear starting from 1 to
MAX_PORTS. This will not work for x1e80100 as the master ports are
are not mapped in the same order.

Without this fix only one speaker in a pair of speakers will function.

After this fix along with WSA codec changes both the speakers starts
working.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240626-port-map-v2-5-6cc1c5608cdd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: add soundwire controller resets

Soundwire controllers (WSA, WSA2, RX, TX) require reset lines to enable
switching clock control from hardware to software.

Add them along with the reset control providers.

Without this reset we might hit fifo under/over run when we try to write to
soundwire device registers.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240624-x1e-swr-reset-v2-3-8bc677fcfa64@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650: add description of CCI controllers

Qualcomm SM8650 SoC has three CCI controllers with two I2C busses
connected to each of them.

The CCI controllers on SM8650 are compatible with the ones found on
many other older generations of Qualcomm SoCs.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240612215835.1149199-5-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: add description of CCI controllers

Qualcomm SM8550 SoC contains 3 Camera Control Interface controllers
very similar to the ones found on other Qualcomm SoCs.

One noticeable difference is that cci@ac16000 controller provides only
one I2C bus and has an additional control over AON CCI pins gpio208
and gpio209, but this feature is not yet supported in the CCI driver.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20240612215835.1149199-4-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm4450: add camera, display and gpu clock controller

Add device node for camera, display and graphics clock controller on
Qualcomm SM4450 platform.

Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-9-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20240611133752.2192401-1-quic_ajipan@quicinc.com' into arm64-for-6.12

Merge the SM4450 display, camera and GPU bindings from a topic branch,
to gain access to the clock defines.

dt-bindings: clock: qcom: add GPUCC clocks on SM4450

Add device tree bindings for the graphics clock controller on
Qualcomm SM4450 platform.

Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-7-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: add CAMCC clocks on SM4450

Add device tree bindings for the camera clock controller on
Qualcomm SM4450 platform.

Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-5-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: clock: qcom: add DISPCC clocks on SM4450

Add device tree bindings for the display clock controller on
Qualcomm SM4450 platform.

Signed-off-by: Ajit Pandey <quic_ajipan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240611133752.2192401-3-quic_ajipan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Enable the power key

No input events are generated from the pressing of the power key on
either Primus or Flex 5G, because the device node isn't enabled.

Give the power key node a label and enable this for the two devices.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20240812-sc8180x-pwrkey-enable-v1-1-2bcc22133774@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650-qrd: use the PMU to power up bluetooth

Change the HW model in sm8650-qrd.dts to a one closer to reality - where
the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
inside the package.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240709-hci_qca_refactor-v3-6-5f48ca001fed@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20240717-dispcc-sm8550-fixes-v2-7-5c4a3128c40b@linaro.org' into arm64-for-6.12

Merge the SM8550/SM8650 display clock controller binding header file
merge through a topic branch, to ensure the bindings are kept in sync
between clock and DeviceTree source branches.

dt-bindings: clock: qcom,sm8650-dispcc: replace with symlink

The display clock controller indices for SM8650 and SM8550 are
completely equal. Replace the header file for qcom,sm8650-dispcc with
the symlink to the qcom,sm8550-dispcc header file.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-7-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-fortuna: Add touch keys

Touch keys feature on fortuna phones are provided by Zinitix touchscreen.
Add property linux,keycodes to enable touch keys.

Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240724143230.3804-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: Add capacity and DPC properties

The "capacity-dmips-mhz" and "dynamic-power-coefficient" are
used to build Energy Model which in turn is used by EAS to take
placement decisions.

Signed-off-by: Ankit Sharma <quic_anshar@quicinc.com>
Link: https://lore.kernel.org/r/20240731111951.6999-1-quic_anshar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8950: Add resin node

Add pm8950 resin node as a feature of the PMIC it should be declared
in pm8950.dtsi, disabled by default. Like all other optional components
it can then by enabled and configured in the board-specific device tree
part.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20240730-pm8950_resin-v1-1-26de4d933f95@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add camera clock controller for sm8150

Add device node for camera clock controller on Qualcomm
SM8150 platform.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240731062916.2680823-9-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20240731062916.2680823-7-quic_skakitap@quicinc.com' into arm64-for-6.12

Merge SM8150 camera clock controller binding from topic branch, to gain
access to constants introduced by this.

dt-bindings: clock: qcom: Add SM8150 camera clock controller

Add device tree bindings for the camera clock controller on
Qualcomm SM8150 platform.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Link: https://lore.kernel.org/r/20240731062916.2680823-7-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x-lenovo-flex-5g: Enable USB multiport controller

The Lenovo Flex 5G has a camera attached to the multiport USB
controller, enable the controller and the four phys to enable this.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-7-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x-primus: Enable the two MP USB ports

The SC8180X Primus comes with an AUX card with two USB ports, fed by the
two multiport ports.

Enable the involved nodes and define two always-on regulators to enable
VBUS for these ports.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-6-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Add USB MP controller and phys

The SC8180X platform comes with a multiport DWC3 controller with two
ports, each connected to a pair of HighSpeed and QMP SuperSpeed PHYs.

Describe these blocks.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-5-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Align USB nodes with binding

Add the pwr_event interrupt and rearrange the order of the other
interrupts to match the binding.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-4-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x-pmics: Add second PMC8180 GPIO

The SC8180X comes with two PMC8180 PMICs, with the GPIO block being used
to control VBUS supply of the second USB multiport port.

Rename the GPIO controller in the first PMC8180 to match the schematics
and define this second controller.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-3-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20240730-sc8180x-usb-mp-v2-1-a7dc4265b553@quicinc.com' into arm64-for-6.12

Merge the sc8180x Global Clock Controller binding from a topic branch,
to gain access to the introduced USB multiport reset constants.

dt-bindings: clock: qcom: Add missing USB MP resets

The USB multiport controller needs a few missing resets, describe them
in the binding.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240730-sc8180x-usb-mp-v2-1-a7dc4265b553@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: Enable ATH10K WLAN

Enable onboard Wi-Fi on the F(x)tec Pro1X.

For reference, HW/SW identifies as:
qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000
qmi fw_version 0x324103d6 fw_build_timestamp 2021-12-02 08:20
fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.2.4-00982-QCAHLSWMTPLZ-1

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-11-b945527fa5d2@riseup.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: Enable remoteprocs

Enable [A,C]DSP and MPSS remote processor on this device.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-10-b945527fa5d2@riseup.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: Enable RGB LED

This device has an RGB LED. It is used for notifications.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-9-b945527fa5d2@riseup.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: Add PMI632 Type-C property

The USB-C port is used for powering external devices and transfer
data from/to them.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-8-b945527fa5d2@riseup.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: Hook up USB3 SS

The F(x)tec Pro1X supports USB 3.0 through it's USB-C port.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-7-b945527fa5d2@riseup.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: Enable MDSS and GPU

Fxtec Pro1x uses the same display (BOE BF060Y8M-AJ0) as Pro1.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-6-b945527fa5d2@riseup.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: Enable SD card slot

Fxtec Pro1X has two card slots and allow either 2xSIM cards or
1xSIM, 1xSD Card configuration.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-5-b945527fa5d2@riseup.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: Add Caps Lock LED

The Pro1X has a caps lock LED on the keyboard.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-4-b945527fa5d2@riseup.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: Add Goodix Touchscreen

The Fxtec Pro1X touchscreen uses Goodix GT9286 chip.

Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-3-b945527fa5d2@riseup.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: Add PCA9534 IO Expander

F(x)tec Pro1X comes with PCA9534 IO Expander, it is used for enabling
touch screen VDD/VDDIO and keyboard's caps lock LED.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-2-b945527fa5d2@riseup.net
[bjorn: Dropped unnecessary comment in i2c1]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115-pro1x: Add Hall Switch and Camera Button

The Pro1X has a flip keyboard and a single-state camera button.

Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20240731-qx1050-feature-expansion-v3-1-b945527fa5d2@riseup.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939-wingtech-wt82918: Add Lenovo Vibe K5 devices

This commit introduces multiple hardware variants of Lenovo Vibe K5.

- A6020a40 (msm8929-wingtech-wt82918hd)
- A6020a46/A6020l36 (msm8939-wingtech-wt82918)
- A6020a40 S616 H39 (msm8939-wingtech-wt82918hd)

These devices are added with support for many features, notably:

- Basic features like USB, mmc/sd storage, wifi, buttons, leds;
- Accelerometer;
- Touchscreen;
- Sound and modem.

Note that "HD" variant of K5 is based on msm8929 which is a lower bin
of msm8939 SoC. A simple dtsi is added for this soc along with the new
devices.

Unfortunately, despite the heavy similarities, the combination of minor
differences between variants make them incompatible between each other.

Signed-off-by: Adam Słaboń <asaillen@protonmail.com>
[Nikita: Minor cleanup, commit message]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240729-msm89xx-wingtech-init-v3-3-32c35476f098@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-wingtech-wt865x8: Add Lenovo A6000/A6010

Add initial device-tree for Lenovo A6000 (wt86518) and Lenovo A6010
(wt86528), which are MSM8916-based devices. These devices are quite
similar, so some configuration is shared in msm8916-wingtech-wt865x8.dtsi.

Lenovo A6000 (wt86518):
 - storage (eMMC and uSD card);
 - usb in peripheral mode;
 - touchscreen;
 - sensors;
 - WiFi/BT;
 - keys;
 - battery and charger.

Lenovo A6010 (wt86528):
 - storage (eMMC and uSD card);
 - usb with extcon;
 - touchscreen;
 - sensors;
 - WiFi/BT;
 - keys;
 - leds;
 - battery;

Signed-off-by: Anton Bambura <jenneron@postmarketos.org>
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Nikita: minor cleanup]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240729-msm89xx-wingtech-init-v3-2-32c35476f098@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add msm8916/39 based Lenovo devices

Add compaitble values for some variants of Lenovo A6000/A6010/A6020
devices. These devices are based on designs from Wingtech so use it's
vendor prefix and part numbers for compatibles.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240729-msm89xx-wingtech-init-v3-1-32c35476f098@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8992-lg-h815: Initial support for LG G4 (H815)

To make it easier for downstream projects and avoid duplication of work.
Makes the device bootable and enables all buttons, hall sensor, eMMC and SD-Card.

Signed-off-by: Alexander Reimelt <alexander.reimelt@posteo.de>
Link: https://lore.kernel.org/r/20240727201413.114317-3-alexander.reimelt@posteo.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: arm: qcom: Add LG G4 (h815)

International variant of the LG G4 from 2015.

Signed-off-by: Alexander Reimelt <alexander.reimelt@posteo.de>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240727201413.114317-2-alexander.reimelt@posteo.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash

The phone has a Silergy SY7802 flash LED controller.

Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240624-sy7802-v5-3-7abc9d96bfa6@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-rossa: Add touchscreen

Core Prime uses an Imagis IST3038 touchscreen that is connected to
blsp_i2c5. Add it to the device tree.

Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240723131441.1764-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: add rpmh-stats node

Add a node describing the RPMh shared memory that can be used to
retrieve statistics for the SoC low-power modes.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240723081357.1521942-1-quic_rjendra@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-longcheer-l8910: Add rear flash

The phone has a Silergy SY7802 flash LED controller.

Tested-by: Stéphane Martins <stemartins@proton.me>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722-x5_sy7802-v1-1-b2ffeeaf8d2d@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-crd: enable SDX65 modem

Enable PCIe5 and the SDX65 modem.

Note that the modem may need to be flashed with firmware before use.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240722094249.26471-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: add PCIe5 nodes

Describe the fifth PCIe controller and its PHY.

Note that using the GIC ITS with PCIe5 does not work currently so the
ITS mapping is left unspecified for now.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240722094249.26471-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch 'arm64-fixes-for-6.11' into HEAD

Merge the X1E PCIe fixes from the fixes branch, to avoid merge conflicts
with the addition of PCIe5 and the modem.

arm64: dts: qcom: x1e80100-yoga-slim7x: fix missing PCIe4 gpios

Add the missing PCIe4 perst, wake and clkreq GPIOs and pin config.

Fixes: 45247fe17db2 ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-13-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-yoga-slim7x: disable PCIe6a perst pull down

Disable the PCIe6a perst pull-down resistor to save some power.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-12-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-yoga-slim7x: fix up PCIe6a pinctrl node

The PCIe6a pinctrl node appears to have been copied from the sc8280xp
CRD dts (via the x1e80100 CRD dts), which has the NVMe on pcie2a and
uses some funny indentation.

Fix up the node name to match the x1e80100 use and label and use only
tabs for indentation.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-11-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-yoga-slim7x: fix PCIe4 PHY supply

The PCIe4 PHY is powered by vreg_l3i (not vreg_l3j) on the CRD reference
design so assume the same applies to the Lenovo Yoga Slim 7x.

Fixes: 45247fe17db2 ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-10-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-vivobook-s15: fix missing PCIe4 gpios

Add the missing PCIe4 perst, wake and clkreq GPIOs and pin config.

Fixes: d0e2f8f62dff ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-vivobook-s15: disable PCIe6a perst pull down

Disable the PCIe6a perst pull-down resistor to save some power.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-vivobook-s15: fix up PCIe6a pinctrl node

The PCIe6a pinctrl node appears to have been copied from the sc8280xp
CRD dts (via the x1e80100 CRD dts), which has the NVMe on pcie2a.

Fix up the node name to match the x1e80100 use and label.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-vivobook-s15: fix PCIe4 PHY supply

The PCIe4 PHY is powered by vreg_l3i (not vreg_l3j) on the CRD reference
design so assume the same applies to the Asus Vivobook S15.

Fixes: d0e2f8f62dff ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-qcp: fix missing PCIe4 gpios

Add the missing PCIe4 perst, wake and clkreq GPIOs and pin config.

Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-qcp: disable PCIe6a perst pull down

Disable the PCIe6a perst pull-down resistor to save some power.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-qcp: fix up PCIe6a pinctrl node

The PCIe6a pinctrl node appears to have been copied from the sc8280xp
CRD dts, which has the NVMe on pcie2a and uses some funny indentation.

Fix up the node name to match the x1e80100 use and label and use only
tabs for indentation.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-qcp: fix PCIe4 PHY supply

The PCIe4 PHY is powered by vreg_l3i (not vreg_l3j) on the CRD so assume
the same applies to the QCP.

Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240722095459.27437-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-crd: fix missing PCIe4 gpios

Add the missing PCIe4 perst, wake and clkreq GPIOs and pin config.

Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Cc: stable@vger.kernel.org # 6.9
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240722094249.26471-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-crd: disable PCIe6a perst pull down

Disable the PCIe6a perst pull-down resistor to save some power.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240722094249.26471-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-crd: fix up PCIe6a pinctrl node

The PCIe6a pinctrl node appears to have been copied from the sc8280xp
CRD dts, which has the NVMe on pcie2a and uses some funny indentation.

Fix up the node name to match the x1e80100 use and label and use only
tabs for indentation.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240722094249.26471-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: add missing PCIe minimum OPP

Add the missing PCIe CX performance level votes to avoid relying on
other drivers (e.g. USB) to maintain the nominal performance level
required for Gen3 speeds.

Fixes: 5eb83fc10289 ("arm64: dts: qcom: x1e80100: Add PCIe nodes")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240722094249.26471-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100: fix PCIe domain numbers

The current PCIe domain numbers are off by one and do not match the
numbers that the UEFI firmware (and Windows) uses.

Fixes: 5eb83fc10289 ("arm64: dts: qcom: x1e80100: Add PCIe nodes")
Cc: stable@vger.kernel.org # 6.9
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240722094249.26471-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-crd: fix PCIe4 PHY supply

The PCIe4 PHY is powered by vreg_l3i (not vreg_l3j).

Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Cc: stable@vger.kernel.org # 6.9
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240722094249.26471-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5332: Fix interrupt trigger type for usb

Trigger type is incorrectly specified as IRQ_TYPE_EDGE_BOTH
instead of IRQ_TYPE_LEVEL_HIGH. This trigger type is not
supported for SPIs and results in probe failure with -EINVAL.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Fixes: 927173bf8a0e ("arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332")
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240723100151.402300-3-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: x1e80100-yoga: add wifi calibration variant

Describe the bus topology for PCIe domain 4 and add the ath12k
calibration variant so that the board file (calibration data) can be
loaded.

Signed-off-by: Patrick Wildt <patrick@blueri.se>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/ZpV7OeGNIGGpqNC0@windev.fritz.box
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-x13s: clean up PCIe2a pinctrl node

Clean up the PCIe2a pinctrl node indentation which should use tabs only.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240719132522.9176-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-x13s: disable PCIe perst pull downs

Disable the PCIe perst pull-down resistors to save some power.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240719132522.9176-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-crd: clean up PCIe2a pinctrl node

Clean up the PCIe2a pinctrl node indentation which should use tabs only.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240719132522.9176-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-crd: disable PCIe perst pull downs

Disable the PCIe perst pull-down resistors to save some power.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240719132522.9176-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550-hdk: add the Wifi node

Describe the ath12k WLAN on-board the WCN7850 module present on the
board.

Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240718125545.2238857-1-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-grandmax: Add touchscreen

Grand Max uses an Imagis IST3038 touchscreen that is connected to
blsp_i2c5. Add it to the device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo06890@proton.me>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240718112715.6117-1-linmengbo06890@proton.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939-samsung-a7: rename pwm node to conform to dtschema

Rename the pwm node from "pwm-vibrator" to "pwm" to conform to the dt schema.

Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240716135339.87192-1-rayyan.ansari@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550-qrd: use the PMU to power up bluetooth

Change the HW model in sm8550-qrd.dts to a one closer to reality - where
the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
inside the package.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240716-topic-sm8x50-upstream-use-pmu-to-power-up-bt-v1-2-67b3755edf6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8650-hdk: use the PMU to power up bluetooth

Change the HW model in sm8650-hdk.dts to a one closer to reality - where
the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
inside the package.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240716-topic-sm8x50-upstream-use-pmu-to-power-up-bt-v1-1-67b3755edf6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: Mark APPS and PCIe SMMUs as DMA coherent

The SMMUs on sa8775p are cache-coherent. GPU SMMU is marked as such,
mark the APPS and PCIe ones as well.

Fixes: 603f96d4c9d0 ("arm64: dts: qcom: add initial support for qcom sa8775p-ride")
Fixes: 2dba7a613a6e ("arm64: dts: qcom: sa8775p: add the pcie smmu node")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Qingqing Zhou <quic_qqzhou@quicinc.com>
Rule: add
Link: https://lore.kernel.org/stable/20240723075948.9545-1-quic_qqzhou%40quicinc.com
Link: https://lore.kernel.org/r/20240725072117.22425-1-quic_qqzhou@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>