Nick Clifton [Wed, 28 Aug 2019 10:39:19 +0000 (11:39 +0100)]
Add a --source-comment=<text> option to objdump which provides a prefix to dipslayed source code lines.
PR 24931
* objdump.c (source_comment): New static variable.
(option_values): Add OPTION_SOURCE_COMMENT.
(long_opions): Add --source-comment.
(print_line): If source comment is set, use it as a prefix to the
source code line.
(main): Handle OPTION_SOURCE_COMMENT.
* doc/binutils.texi: Document the new option.
* NEWS: Mention the new feature.
* testsuite/binutils-all/objdump.exp (test_objdump_S): Add tests
of the -S and --source-comment options.
../../gdb/nat/linux-namespaces.c: In function ‘void mnsh_main(int)’:
../../gdb/nat/linux-namespaces.c:604:8: warning: ‘fd’ may be used uninitialized in this function [-Wmaybe-uninitialized]
close (fd);
~~~~~~^~~~
And the warning is correct -- mnsh_recv_message can return -1 and leave fd
uninitialized, and mnsh_main will still call close (fd) if that happens.
Initialize fd to -1 to avoid that.
gdb/ChangeLog:
2019-08-27 Christian Biesinger <cbiesinger@google.com>
Andrew Burgess [Mon, 22 Jul 2019 15:53:06 +0000 (16:53 +0100)]
gdb: Add new -n flag to some info commands
The 'info variables', its alias 'whereis', and 'info functions' all
include non-debug symbols in the output by default. The list of
non-debug symbols can sometimes be quite long, resulting in the
debug symbol based results being scrolled off the screen.
This commit adds a '-n' flag to all of the commands listed above that
excludes the non-debug symbols from the results, leaving just the
debug symbol based results.
gdb/ChangeLog:
* cli/cli-utils.c (info_print_options_defs): Delete.
(make_info_print_options_def_group): Delete.
(extract_info_print_options): Delete.
(info_print_command_completer): Delete.
(info_print_args_help): Add extra parameter, and optionally
include text about -n flag.
* cli/cli-utils.h (struct info_print_options): Delete.
(extract_info_print_options): Delete declaration.
(info_print_command_completer): Delete declaration.
(info_print_args_help): Add extra parameter, extend header
comment.
* python/python.c (gdbpy_rbreak): Pass additional parameter to
search_symbols.
* stack.c (struct info_print_options): New type.
(info_print_options_defs): New file scoped variable.
(make_info_print_options_def_group): New static function.
(info_print_command_completer): New static function.
(info_locals_command): Update to use new local functions.
(info_args_command): Likewise.
(_initialize_stack): Add extra parameter to calls to
info_print_args_help.
* symtab.c (search_symbols): Add extra parameter, use this to
possibly excluse non-debug symbols.
(symtab_symbol_info): Add extra parameter, which is passed on to
search_symbols.
(struct info_print_options): New type.
(info_print_options_defs): New file scoped variable.
(make_info_print_options_def_group): New static function.
(info_print_command_completer): New static function.
(info_variables_command): Update to use local functions, and pass
extra parameter through to symtab_symbol_info.
(info_functions_command): Likewise.
(info_types_command): Pass additional argument through to
symtab_symbol_info.
(rbreak_command): Pass extra argument to search_symbols.
(_initialize_symtab): Add extra arguments for calls to
info_print_args_help, and update help text for 'info variables',
'whereis', and 'info functions' commands.
* symtab.h (search_symbols): Add extra argument to declaration.
* NEWS: Mention new flags.
gdb/doc/ChangeLog:
* gdb.texinfo (Symbols): Add information about the -n flag to
"info variables" and "info functions".
gdb/testsuite/ChangeLog:
* gdb.base/info-fun.exp: Extend to test the -n flag for 'info
functions'. Reindent as needed.
* gdb.base/info-var-f1.c: New file.
* gdb.base/info-var-f2.c: New file.
* gdb.base/info-var.exp: New file.
* gdb.base/info-var.h: New file.
Add support for the MVE VMOV instruction to the ARM assembler. This instruction copies the value of one vector register to another vector register. The patch also modifies the decoding of VORR instruction which is effecting decoding of VMOV instruction.
gas * config/tc-arm.c (parse_neon_mov): Add check to accept vector
register to both the arguments in VMOV instruction.
* testsuite/gas/arm/mve-vmov-1.d: Modify.
* testsuite/gas/arm/mve-vmov-1.s: Likewise.
* testsuite/gas/arm/mve-vorr.d: Likewise.
opcodes * arm-dis.c (mve_opcodes): Add entry for MVE_VMOV_VEC_TO_VEC.
(is_mve_undefined): Add case for MVE_VMOV_VEC_TO_VEC.
(print_insn_mve): Add condition to check Qm==Qn of VORR instruction.
Factor out the common code in lookup_{static,global}_symbol
The two functions are extremely similar; this factors out their code into
a shared _internal function.
gdb/ChangeLog:
2019-08-26 Christian Biesinger <cbiesinger@google.com>
* symtab.c (lookup_static_symbol): Call the new function (and move
it down to be next to lookup_global_symbol).
(struct global_sym_lookup_data): Add block_enum member and rename to...
(struct global_or_static_sym_lookup_data): ...this.
(lookup_symbol_global_iterator_cb): Pass block_index instead of
GLOBAL_BLOCK to lookup_symbol_in_objfile and rename to...
(lookup_symbol_global_or_static_iterator_cb): ...this.
(lookup_global_or_static_symbol): New function.
(lookup_global_symbol): Call new function.
Tom de Vries [Mon, 26 Aug 2019 17:24:59 +0000 (19:24 +0200)]
[gdb, c++] Improve error message when using libstdcxx without SDT probes
When using catch catch/rethrow/catch, a libstdcxx with SDT probes is required
for both the regexp argument, and the convenience variable $_exception (
https://sourceware.org/gdb/current/onlinedocs/gdb/Set-Catchpoints.html ).
Currently, when using these features with a libstdcxx without SDT probes, we
get the cryptic error message:
...
not stopped at a C++ exception catchpoint
...
Improve this by instead emitting the more helpful:
...
did not find exception probe (does libstdcxx have SDT probes?)
...
Tom de Vries [Mon, 26 Aug 2019 16:48:02 +0000 (18:48 +0200)]
[gdb/testsuite] Make skip_libstdcxx_probe_tests return 1 if true
The tcl proc skip_libstdcxx_probe_tests currently returns 0 if the probe tests
need to be skipped, while tcl interprets 0 as false rather than true, which is
confusing.
Fix this by making skip_libstdcxx_probe_tests return 1 if the probe tests need
to be skipped.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-26 Tom de Vries <tdevries@suse.de>
* lib/gdb.exp (skip_libstdcxx_probe_tests_prompt): Return 1 if probe
* tests need to be skipped.
* gdb.cp/exceptprint.exp: Update call to skip_libstdcxx_probe_tests.
* gdb.mi/mi-catch-cpp-exceptions.exp: Update call to
mi_skip_libstdcxx_probe_tests.
Use raw strings on gdb.python/py-xmethods.exp (and fix Python 3.8's "SyntaxWarning: invalid escape sequence")
The way unrecognized escape sequences are handled has changed in
Python 3.8: users now see a SyntaxWarning message, which will
eventually become a SyntaxError in future versions of Python:
(gdb) source /blabla/gdb.python/py-xmethods/py-xmethods.py
/blabla/gdb.python/py-xmethods/py-xmethods.py:204: SyntaxWarning: invalid escape seque
nce \+
'operator\+',
/blabla/gdb.python/py-xmethods/py-xmethods.py:211: SyntaxWarning: invalid escape seque
nce \+
'operator\+\+',
One of our testcases, gdb.python/py-xmethods.exp, contains strings in
the form of "operator\+". This is not recognized by Python, but is
still needed by the testsuite to work properly. The solution is
simple: we just have to make sure these strings are marked as
raw (i.e, r""). This is what this patch does. I took the opportunity
to also convert other strings to raw, which, in two cases, allowed the
removal of an extra backslash.
I tested this using Python 3.7 and Python 3.8, and everything works
fine.
I think I could push this as obvious, but decided to send it to
gdb-patches just in case.
Kito Cheng [Tue, 20 Aug 2019 09:47:58 +0000 (17:47 +0800)]
RISC-V: Improve li expansion for better code density.
li is a pseudo instruction in RISC-V, it might expand to more than one
instructions if the immediate value can't fit addi or lui, but the
assembler will always using 4-byte instructions during expansion.
It because load_const use macro_build to emit instructions,
and macro_build call append_insn, and expect it will compress
it if possible, but the fact is append_insn never compress anything,
So this patch redirect the li expansion flow to normal instruction
emission flow via md_assemble, added md_assemblef as an wrapper for
that for easier emit instruction with printf-style argument to build
instruction.
gas/ChangeLog:
* tc-riscv.c (md_assemblef): New.
(load_const) Use md_assemblef instead of macro_build to emit
instructions.
* testsuite/gas/riscv/li32.d: New.
* testsuite/gas/riscv/li32.s: Ditto.
* testsuite/gas/riscv/li64.d: Ditto.
* testsuite/gas/riscv/li64.s: Ditto.
Simon Marchi [Mon, 26 Aug 2019 01:30:02 +0000 (21:30 -0400)]
dwarf2read: fix compilation issue with gcc 4.8
gcc 4.8 (and probably other versions too) doesn't like that the local
variable symbol_linkage has the same name as the enum class defined in
the same context:
CXX dwarf2read.o
/home/smarchi/src/binutils-gdb/gdb/dwarf2read.c: In member function ‘dwarf2_per_cu_data* dw2_debug_names_iterator::next()’:
/home/smarchi/src/binutils-gdb/gdb/dwarf2read.c:5850:22: error: ‘symbol_linkage’ is not a class, namespace, or enumeration
} symbol_linkage = symbol_linkage::unknown;
^
Rename the local variable to avoid this.
This problem was originally reported with the Netbsd builder on the
buildbot, which uses gcc 5.5, I believe. I am not able to test it on
that builder right now, but chances are that the fix will work there
too.
gdb/ChangeLog:
* dwarf2read.c (dw2_debug_names_iterator::next): Rename local
variable symbol_linkage to symbol_linkage_.
My compiler (g++ 8.2) can't tell that *bsc_ptr and *slot_ptr are
only used in the cases when it does get initialized. Just initialize
the vars earlier to avoid the warning, there does not seem to be a
downside to it.
../../gdb/symtab.c: In function ‘block_symbol lookup_static_symbol(const char*, domain_enum)’:
../../gdb/symtab.c:1366:11: warning: ‘slot’ may be used uninitialized in this function [-Wmaybe-uninitialized]
xfree (slot->value.not_found.name);
~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../gdb/symtab.c:2578:29: note: ‘slot’ was declared here
struct symbol_cache_slot *slot;
^~~~
../../gdb/symtab.c:1405:3: warning: ‘bsc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (bsc == NULL)
^~
../../gdb/symtab.c:2577:30: note: ‘bsc’ was declared here
struct block_symbol_cache *bsc;
^~~
../../gdb/symtab.c: In function ‘block_symbol lookup_global_symbol(const char*, const block*, domain_enum)’:
../../gdb/symtab.c:1366:11: warning: ‘slot’ may be used uninitialized in this function [-Wmaybe-uninitialized]
xfree (slot->value.not_found.name);
~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../gdb/symtab.c:2658:29: note: ‘slot’ was declared here
struct symbol_cache_slot *slot;
^~~~
../../gdb/symtab.c:1409:14: warning: ‘bsc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
++bsc->collisions;
~~~~~^~~~~~~~~~
../../gdb/symtab.c:2657:30: note: ‘bsc’ was declared here
struct block_symbol_cache *bsc;
^~~
gdb/ChangeLog:
2019-08-22 Christian Biesinger <cbiesinger@google.com>
* symtab.c (symbol_cache_lookup): Always initialize *bsc_ptr and *slot_ptr.
Alan Modra [Sat, 24 Aug 2019 00:29:03 +0000 (09:59 +0930)]
PowerPC64 segfault in ppc64_elf_edit_toc
Found on a GOT reference to __ehdr_start, which is tweaked to be
undefined weak at some stages of linking. SYMBOL_REFERENCES_LOCAL
isn't a sufficient test.
* elf64-ppc.c (ppc64_elf_edit_toc): Exclude undefined weak
symbols from GOT optimisation.
I need to use 'gdb_dlopen' inside 'gdbsupport/', but it's not yet
supported there. This commit moves 'gdb-dlfcn.[ch]' to 'gdbsupport/',
which makes it available also on gdbserver.
Sandra Loosemore [Fri, 23 Aug 2019 15:18:54 +0000 (08:18 -0700)]
Fix bug in nios2 prologue analysis.
The nios2 prologue analyzer was mistakenly using an unsigned int field
to represent a 32-bit signed value. This caused problems with an
incorrect conversion being applied to negative values when they were
automatically promoted for addition to a 64-bit CORE_ADDR value.
This patch fixes test failures in gdb.base/large-frame.exp and
gdb.dwarf2/dw2-ref-missing-frame.exp. Normally the nios2 backend
prefers to use the dwarf2 unwinder so the prologue analyzer is only
invoked if there is no dwarf2 information.
Stafford Horne [Fri, 23 Aug 2019 13:25:55 +0000 (22:25 +0900)]
or1k: Fix incorrect value in PLT GOT entries, causing infinite loop
The PLT GOT entry should point to the first PLT entry which contains the
runtime linker function. It was pointing back to the symbol PLT entry
causing an infinite loop.
I found this when testing the OpenRISC glibc port which uses the runtime
dynamic linker. It seems other libc's we use so far have not been
making use of the initial PLT GOT entries.
bfd/ChangeLog:
* elf32-or1k.c (or1k_elf_finish_dynamic_symbol): Use correct value for
PLT GOT entries.
Nick Clifton [Fri, 23 Aug 2019 12:22:02 +0000 (13:22 +0100)]
Stop the BFD library from failing when encountering a second set of relocs for the same section.
PR 24456
* elf.c (bfd_section_from_shdr): Issue an informative warning
message and continue processing other sections after encountering
a reloc section for a section which already has other relocs
associated with it.
Nick Clifton [Fri, 23 Aug 2019 09:37:51 +0000 (10:37 +0100)]
Prevent a potential illegal memory access in the DWARF parser when processing a corrupt file.
PR 24829
* dwarf.c (check_uvalue): New function. Ensures that a block's
size is valid.
(read_and_display_attr_value): Use check_value when processsing
DW_FORM_block<n> attributes.
PyFile_FromString and PyFile_AsFile have been removed in Python 3.
There is no obvious replacement that works here, and we can't just
pass our FILE* to a DLL in Windows because it may use a different
C runtime.
So we just call a Python function which reads and executes file
contents. Care must be taken to execute it in the context of
__main__.
Tested by inverting the ifdef and running the testsuite on Debian
Linux (even without the patch, I failed at running the testsuite
on Windows). I did test with both Python 2 and 3.
gdb/ChangeLog:
2019-08-22 Christian Biesinger <cbiesinger@google.com>
* python/lib/gdb/__init__.py (_execute_file): New function.
* python/python.c (python_run_simple_file): Call gdb._execute_file
on Windows.
Tom de Vries [Thu, 22 Aug 2019 14:54:59 +0000 (16:54 +0200)]
[gdb/testsuite] Make gdb_test message more informative in multi-term-settings.exp
This racy fail message, reported in PR24929:
...
FAIL: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: \
stop with control-c
...
does not make clear which gdb_test fails here:
...
if {$expect_ttou} {
gdb_test "" "Quit" "stop with control-c"
} else {
gdb_test "" "received signal SIGINT.*" "stop with control-c"
}
...
Fix this by making the gdb_test message argument more informative.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-22 Tom de Vries <tdevries@suse.de>
* gdb.multi/multi-term-settings.exp (coretest): Make gdb_test messages
more informative.
Dennis Zhang [Thu, 22 Aug 2019 14:21:32 +0000 (15:21 +0100)]
Arm: Add support for missing CPUs
This patch adds support for following CPUs:
Cortex-M35P, Cortex-A77, Cortex-A76AE.
Related specifications can be found at https://developer.arm.com/ip-products/processors.
gas/ChangeLog:
* config/tc-arm.c: New entries for Cortex-M35P, Cortex-A77,
and Cortex-A76AE.
* doc/c-arm.texi: Document new processors.
* testsuite/gas/arm/cpu-cortex-a76ae.d: New test.
* testsuite/gas/arm/cpu-cortex-a77.d: New test.
* testsuite/gas/arm/cpu-cortex-m35p.d: New test.
bfd/ChangeLog:
* cpu-arm.c: New entries for Cortex-M35P, Cortex-A77, Cortex-A76AE.
Bosco Garc?a [Thu, 22 Aug 2019 11:54:06 +0000 (12:54 +0100)]
Fix the assembler's floating point number parser so that it can correctly handle numbers encoded as a leading decimal point, followed by zeroes, followed by a non-zero sequence.
* atof-generic.c (atof_generic): Do not ignore leading zeros if
they appear after a decimal point.
* testsuite/gas/all/float.s: Extend test to include a number with
a leading decimal point followed by several zeroes.
* testsuite/gas/i386/fp.s: Likewise.
* testsuite/gas/i386/fp.d: Update expected output.
Andrew Burgess [Thu, 22 Aug 2019 09:07:00 +0000 (10:07 +0100)]
gdb/fortran: Remove some dead code from the parser
The Fortran parser contains some code that looks like it was probably
inherited from the C/C++ parser as it checks to see if the current
language is C++, which should never be true when we're in the Fortran
parser.
gdb/ChangeLog:
* f-exp.y (yylex): Remove is_a_field_of_this local variable, and
all uses as this was never set to anything but a zero value.
Tamar Christina [Thu, 22 Aug 2019 10:35:35 +0000 (11:35 +0100)]
AArch64: Fix LD crash on weak and undefined TLS symbols. (PR/24602).
This patch fixes a few linker crashes due to TLS code reaching an assert when it
shouldn't.
The first scenario is with weak TLS symbols that remain weak during linking. In
this case the mid-end would not have seen a TLS symbol and so wouldn't have
allocated the TLS section. We currently assert here and the linker crashes with
a not very useful message.
This patch changes this to return the value 0 for the TLS symbol in question
emulating what lld and gold and other BFD targets do. However because weak TLS
is implementation defined and we don't define any behavior for it I also emit a
warning to the user to inform them of such.
Secondly when a strong TLS reference is undefined. The linker crashes even after
it correctly reported that there is an undefined reference. This changes it so
that it gracefully exits and reports a useful error.
bfd/ChangeLog:
PR ld/24601
* elfnn-aarch64.c (aarch64_relocate): Handle weak TLS and undefined TLS.
Also Pass input_bfd to _bfd_aarch64_elf_resolve_relocation.
* elfxx-aarch64.c (_bfd_aarch64_elf_resolve_relocation): Use it.
* elfxx-aarch64.h (_bfd_aarch64_elf_resolve_relocation): Emit warning
for weak TLS.
ld/ChangeLog:
PR ld/24601
* testsuite/ld-aarch64/aarch64-elf.exp (undef-tls, weak-tls): New.
* testsuite/ld-aarch64/undef-tls.d: New test.
* testsuite/ld-aarch64/undef-tls.s: New test.
* testsuite/ld-aarch64/weak-tls.d: New test.
* testsuite/ld-aarch64/weak-tls.s: New test.
The floats will always be encoded using the binary16 format as described in the
IEEE 754-2008 standard. There is no need to support Arm's alternative half-precision
format since AArch64 only supports the IEEE format.
gas * config/tc-aarch64.c: Add float16 directive and add "Hh" to
acceptable float characters.
* doc/c-aarch64.texi: Documentation for float16 directive.
* testsuite/gas/aarch64/float16-be.d: New test.
* testsuite/gas/aarch64/float16-le.d: New test.
* testsuite/gas/aarch64/float16.s: New test.
* NEWS: Add NEWS entry.
Kyrylo Tkachov [Thu, 22 Aug 2019 09:20:01 +0000 (10:20 +0100)]
[AArch64][gas] Update MTE system register encodings
The MTE specification adjusted the encoding of the TFSRE0_EL1, TFSR_EL1, TFSR_EL2, TFSR_EL3, TFSR_EL12 system registers.
This patch brings binutils up to date.
The references for the encodings are at:
https://developer.arm.com/docs/ddi0595/latest/aarch64-system-registers/tfsre0_el1 (also contains TFSR_EL12 description)
https://developer.arm.com/docs/ddi0595/latest/aarch64-system-registers/tfsr_el1
https://developer.arm.com/docs/ddi0595/latest/aarch64-system-registers/tfsr_el2
https://developer.arm.com/docs/ddi0595/latest/aarch64-system-registers/tfsr_el3
Tested check-gas for aarch64-none-elf.
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Update encoding of tfsre0_el1,
tfsr_el1, tfsr_el2, tfsr_el3, tfsr_el12.
(aarch64_sys_reg_supported_p): Update checks for the above.
gas/
* testsuite/gas/aarch64/sysreg-4.d: Update expected disassembly for
tfsre0_el1, tfsr_el1, tfsr_el2, tfsr_el3, tfsr_el12 system registers.
Alan Modra [Thu, 22 Aug 2019 01:51:48 +0000 (11:21 +0930)]
ARM CMSE symbols
This patch removes use of st_target_internal to cache the result of
comparing symbol names against CMSE_PREFIX. The problem with setting
a bit in st_target_internal in swap_symbol_in is that calling
bfd_elf_sym_name from swap_symbol_in requires symtab_hdr, and you
don't know for sure whether swap_symbol_in is operating on dynsyms
(and thus elf_tdata (abfd)->dynsymtab_hdr should be used) or on the
normal symtab (thus elf_tdata (abfd)->symtab_hdr). You can make an
educated guess based on abfd->flags & DYNAMIC but that relies on
knowing a lot about calls to bfd_elf_get_elf_syms, and is fragile in
the face of possible future changes.
include/
* elf/arm.h (ARM_GET_SYM_CMSE_SPCL, ARM_SET_SYM_CMSE_SPCL): Delete.
bfd/
* elf32-arm.c (cmse_scan): Don't use ARM_GET_SYM_CMSE_SPCL,
instead recognize CMSE_PREFIX in symbol name.
(elf32_arm_gc_mark_extra_sections): Likewise.
(elf32_arm_filter_cmse_symbols): Don't test ARM_GET_SYM_CMSE_SPCL.
(elf32_arm_swap_symbol_in): Don't invoke ARM_SET_SYM_CMSE_SPCL.
Jinke Fan [Wed, 15 May 2019 09:34:57 +0000 (17:34 +0800)]
gdb/djgpp: Add Hygon Dhyana processor support
Chengdu Haiguang IC Design Co., Ltd (Hygon) is a Joint Venture between
AMD and Haiguang Information Technology Co.,Ltd., which aims at
providing high performance x86 processors for the China server market.
Its first generation processor codename is Dhyana, which originates
from AMD technology and shares most of the architecture with AMD's
family 17h, but with different CPU Vendor ID("HygonGenuine")/Family
series number(Family 18h).
gdb/ChangeLog:
2019-08-21 Jinke Fan <fanjinke51@yeah.net>
Tom de Vries [Wed, 21 Aug 2019 09:49:33 +0000 (11:49 +0200)]
[gdb/testsuite] Stabilize gdb-caching-proc.exp test order
The test-case gdb-caching-proc.exp tests each gdb_caching_proc in
gdb/testsuite/lib/*.exp. However, the order of .exp file being tested can
change from run to run, because of using glob.
Tom Tromey [Sat, 13 Jul 2019 22:47:31 +0000 (16:47 -0600)]
Change tui_make_window to be a method
I combined several small changes into one patch here. I believe I
started by noticing that the "title" is not needed by tui_gen_win_info
and could be self-managing (i.e. std::string). Moving this revealed
that "can_box" is also a property of tui_win_info and not
tui_gen_win_info; and this in turn caused the changes to
tui_make_window and box_win.
Tom Tromey [Sat, 13 Jul 2019 22:36:07 +0000 (16:36 -0600)]
Remove tui_data_window::display_regs
There's no need for tui_data_window::display_regs any more (if there
ever was). All the paths through data window construction will end up
setting this to true. This patch removes the member.
Tom Tromey [Sat, 13 Jul 2019 22:24:48 +0000 (16:24 -0600)]
Remove indirection from tui_data_window::regs_content
tui_data_window::regs_content is currently a vector of unique_ptr.
However, due to the way this is managed now, there is no need to keep
the pointers -- it can simply be a vector of the objects themselves.
This patch removes this extra layer of indirection.
Tom Tromey [Sat, 13 Jul 2019 22:15:30 +0000 (16:15 -0600)]
Change tui_check_register_values to be a method
This changes tui_check_register_values to be a method on
tui_data_window. An additional check in tui_register_changed is
needed, because TUI_DATA_WIN could be NULL at this point.
Tom Tromey [Sat, 13 Jul 2019 22:01:34 +0000 (16:01 -0600)]
Change tui_data_item_window::content to be a unique_xmalloc_ptr
This changes tui_data_item_window::content to be a unique_xmalloc_ptr
and fixes up the fallout. It also removes a parameter from
tui_expand_tabs, as it was only ever given one value.
This also removes some tab-handling code from
tui_data_window::display_registers_from. Because the content can only
be set by tui_register_format, and because that calls tui_expand_tabs,
it's not possible to see a tab here.
gdb/ChangeLog
2019-08-20 Tom Tromey <tom@tromey.com>
* tui/tui-regs.h (struct tui_data_item_window)
<~tui_data_item_window>: Remove.
<content>: Now a unique_xmalloc_ptr.
* tui/tui-regs.c (tui_register_format): Return a
unique_xmalloc_ptr.
(tui_get_register): Update.
(~tui_data_item_window): Remove.
(tui_data_window::display_registers_from, tui_display_register):
Update.
* tui/tui-io.h (tui_expand_tabs): Update.
* tui/tui-io.c (tui_expand_tabs): Return a unique_xmalloc_ptr.
Remove "col" parameter.
Tom Tromey [Sat, 13 Jul 2019 21:55:02 +0000 (15:55 -0600)]
Minor rearrangement in tui-regs.c
This moves a couple of functions earlier in tui-regs.c. Previously
they were in the "command" section of the file, but really they belong
in the "window implementation" section.
gdb/ChangeLog
2019-08-20 Tom Tromey <tom@tromey.com>
Tom Tromey [Sat, 13 Jul 2019 21:45:14 +0000 (15:45 -0600)]
Some i18n fixes for the TUI
The TUI has a few #defines that hold user-visible strings. As these
are only used in a single spot, this patch removes the defines,
preferring direct use of the string where needed. Furthermore, now
the strings are wrapped in _(), which is friendlier for i18n purposes.
gdb/ChangeLog
2019-08-20 Tom Tromey <tom@tromey.com>
Dennis Zhang [Tue, 20 Aug 2019 16:13:29 +0000 (17:13 +0100)]
Adds support for following CPUs to the ARM and Aarch64 assemblers: Cortex-A77, Cortex-A76AE, Cortex-A34, Cortex-A65, and Cortex-A65AE.
Related specifications can be found at
https://developer.arm.com/ip-products/processors.
gas * NEWS: Mention the Arm and AArch64 new processors.
* config/tc-aarch64.c: New entries for Cortex-A34, Cortex-A65,
Cortex-A77, cortex-A65AE, and Cortex-A76AE.
* doc/c-aarch64.texi: Document new CPUs.
* testsuite/gas/aarch64/cpu-cortex-a34.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a65.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a65ae.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a76ae.d: New test.
* testsuite/gas/aarch64/cpu-cortex-a77.d: New test.
* testsuite/gas/aarch64/nop-asm.s: New test.
bfd * cpu-aarch64.c: New entries for Cortex-A34, Cortex-A65,
Cortex-A77, cortex-A65AE, and Cortex-A76AE.
Tamar Christina [Tue, 20 Aug 2019 15:34:26 +0000 (16:34 +0100)]
Arm: Fix performance issue with thumb-2 tailcalls
We currently use a padding NOP after a Thumb to Arm interworking veneer (BX pc).
The NOP is never executed but may result in a performance penalty on some cores.
For this reason this patch changes the NOPs after Thumb to Arm veneers into B .-2
and adds a note to this in the source code for future reference.
bfd/ChangeLog:
* elf32-arm.c (elf32_thumb2_plt_entry, elf32_arm_plt_thumb_stub,
elf32_arm_stub_long_branch_v4t_thumb_thumb,
elf32_arm_stub_long_branch_v4t_thumb_arm,
elf32_arm_stub_short_branch_v4t_thumb_arm,
elf32_arm_stub_long_branch_v4t_thumb_arm_pic,
elf32_arm_stub_long_branch_v4t_thumb_thumb_pic,
elf32_arm_stub_long_branch_v4t_thumb_tls_pic): Change nop to branch to
previous instruction.
Tom de Vries [Tue, 20 Aug 2019 15:18:09 +0000 (17:18 +0200)]
[gdb/testsuite] Clean up stale exec in gdb_compile_pascal
When running a pascal test with the stabs target board:
...
$ test=gdb.pascal/case-insensitive-symbols.exp
$ cd build/gdb/testsuite
$ make check RUNTESTFLAGS="$test --target_board=stabs"
...
we get:
...
nr of untested testcases 1
nr of unsupported tests 1
...
due to:
...
Error: Illegal parameter: -gstabs+^M
Error: /usr/bin/ppcx64 returned an error exitcode^M
...
OTOH, when running the same pascal test without the stabs target board:
...
$ make check RUNTESTFLAGS="$test"
...
we get:
...
nr of expected passes 20
...
But when subsequently again running with the stabs target board:
...
$ make check RUNTESTFLAGS="$test --target_board=stabs"
...
we now get:
...
nr of expected passes 20
...
The problem is that gdb_compile_pascal determines success based on existence
of the exec after compilation:
...
if ![file exists $destfile] {
unsupported "Pascal compilation failed: $result"
return "Pascal compilation failed."
}
...
without removing the exec before compilation, which allows a stale exec to
make it seem as if compilation has succeeded.
Fix this by removing the stale exec before compilation.
gdb/testsuite/ChangeLog:
2019-08-20 Tom de Vries <tdevries@suse.de>
* lib/pascal.exp (gdb_compile_pascal): Remove $destfile before
compilation.
Conrad Meyer [Mon, 19 Aug 2019 07:02:19 +0000 (00:02 -0700)]
Improve remote attach round-trips without btrace
For remotes which do not support btrace at all, we can save several
round trips for each thread. This is especially significant when your
remote is a kernel with 100s or 1000s of threads and latency is
intercontinental.
Previously, with target, remote, and infrun debugging enabled, one
might see:
MIPS/gas: Retain ISA mode bit for labels with .insn annotation
gas/
* config/tc-mips.c (mips_move_labels): Retain ISA mode bit
when moving labels in text segments.
(mips_align): Indicate text mode when aligning labels in
text segments.
* gas/testsuite/gas/mips/insn-isa-mode.d: New test.
* gas/testsuite/gas/mips/insn-isa-mode.s: New test source.
* gas/testsuite/gas/mips/mips.exp: Run the new test.
Tom Tromey [Tue, 13 Aug 2019 17:39:58 +0000 (11:39 -0600)]
Fix Fortran regression with variables in nested functions
Sergio pointed out that commit commit aa3b6533 ("Allow nested function
displays") regressed a few gdb.fortran tests. I was able to reproduce
these failures with gcc head.
The bug is that some spots calling contained_in will in fact do the
wrong thing if nested functions are considered as contained. In the
particular case of the Fortran regression, it was the call in
block_innermost_frame, being called from get_hosting_frame -- in this
case, the caller is specifically trying to avoid the nested case.
This patch fixes the problem by adding an "allow_nested" parameter to
contained_in, essentially reverting the change for most callers.
gdb/ChangeLog
2019-08-19 Tom Tromey <tromey@adacore.com>
Tom Tromey [Mon, 24 Jun 2019 22:02:47 +0000 (16:02 -0600)]
Add Rust support to source highlighting
Currently, no release of GNU Source Highlight supports Rust. However,
I've checked in a patch to do so there, and I plan to make a new
release sometime this summer.
This patch prepares gdb for that by adding support for Rust to the
source highlighting code.
Because Source Highlight will throw an exception if the language is
unrecognized, this also changes gdb to ignore exceptions here. This
will cause gdb to fall back to un-highlighted source text.
This updates gdb's configure script to reject the combination of
Source Highlight and -static-libstdc++. This is done because it's not
possible to use -static-libstdc++ and then catch exceptions from a
shared library.
Tested with the current and development versions of Source Highlight.
gdb/ChangeLog
2019-08-19 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Disallow the combination of -static-libstdc++ and
source highlight.
* source-cache.c (get_language_name): Handle rust.
(source_cache::get_source_lines): Ignore highlighting exceptions.
Tom Tromey [Fri, 26 Jul 2019 21:42:25 +0000 (15:42 -0600)]
Add --with-static-standard-libraries to the top level
gdb should normally not be linked with -static-libstdc++. Currently
this has not caused problems, but it's incompatible with catching an
exception thrown from a shared library -- and a subsequent patch
changes gdb to do just this.
This patch adds a new --with-static-standard-libraries flag to the
top-level configure. It defaults to "auto", which means enabled if
gcc is being built, and disabled otherwise.
Tom Tromey [Thu, 15 Aug 2019 13:33:20 +0000 (07:33 -0600)]
Fix N^2 behavior in _bfd_dwarf2_find_symbol_bias
A customer reported a case where addr2line was very slow. We tracked
this down to some N^2 behavior in _bfd_dwarf2_find_symbol_bias in the
unusual case where no function can be found.
This patch fixes the bug, and reduces the runtime for a particular
request from 127 seconds to 1 second.
bfd/ChangeLog
2019-08-19 Tom Tromey <tromey@adacore.com>
Alan Modra [Mon, 19 Aug 2019 10:54:35 +0000 (20:24 +0930)]
PR24898, An out-of-bounds read occured in display_data
Given 32-bit pointers and a 64-bit bfd_size_type, it is relatively
easy to construct a value of augmentation_data_len (eg. 0x100000000)
that won't fail pointer checks but will print without bounds.
PR 24898
* dwarf.c (display_debug_frames): Use the read_cie check and error
for augmentation data length.
Alan Modra [Mon, 19 Aug 2019 08:04:03 +0000 (17:34 +0930)]
PowerPC64 ha/lo insn checks
These are done in ppc64_elf_edit_toc, which now also garbage collects
unused GOT entries. The checks for legitimate instructions weren't
being done for the GOT relocs, unless the file also happened to have a
toc section.
* elf64-ppc.c (struct ppc64_elf_obj_tdata): Rename has_gotrel
to has_optrel.
(struct _ppc64_elf_section_data): Likewise.
(ppc64_elf_check_relocs): Set has_optrel for more relocs.
(ppc64_elf_edit_toc): Do ha/lo insn checks in GOT loop rather
than TOC loop. Check PLT16 insns too.
Barnaby Wilks [Thu, 15 Aug 2019 16:21:59 +0000 (16:21 +0000)]
Float16: Fix test failures for non ELF targets
The tests were failing due to md_atof trying to do word-wise endian
switching on the float16 (for little-endian targets sometimes
multi word values have their word order changed).
However since a float16 is only 1 word wide, it would end up writing
incorrect data, as you cannot switch the word order of just one word.
Tom de Vries [Fri, 16 Aug 2019 21:48:28 +0000 (23:48 +0200)]
[gdb/testsuite] Fix compare-sections.exp with -fPIE/-pie
When running gdb.base/compare-sections.exp with target board -fPIE/-pie, we
get:
...
FAIL: gdb.base/compare-sections.exp: after run to main: compare-sections -r
...
The test expects the read-only sections to have the same contents as in the
file:
...
# Assume startup code doesn't change read-only sections.
compare_sections "-r"
...
but that's not the case for PIE executables.
Fix this by allowing mismatched read-only sections for PIE executables.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-08-16 Tom de Vries <tdevries@suse.de>
* gdb.base/compare-sections.exp ("after run to main"): Allow
mismatched read-only sections for PIE executables.
x86-64: Restore PIC check for PCREL reloc against protected symbol
moved PIC check for PC-relative relocations to elf_x86_64_check_relocs.
Since linker defined symbols may not be processed at the time, we need
to move the check back to elf_x86_64_relocate_section.
bfd/
PR ld/24905
* elf64-x86-64.c (elf_x86_64_check_relocs): Move PIC check for
PC-relative relocations back to ...
(elf_x86_64_relocate_section): Here.
ld/
PR ld/24905
* testsuite/ld-x86-64/pr24905-x32.d: New file.
* testsuite/ld-x86-64/pr24905.d: Likewise.
* testsuite/ld-x86-64/pr24905.s: Likewise.
* testsuite/ld-x86-64/pr24905.t: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Run pr24905 and pr24905-x32.
Tom Tromey [Sat, 13 Jul 2019 00:18:10 +0000 (18:18 -0600)]
Remove the TUI execution info window
The TUI execution info window is unusual in that it is always linked
to a source or disassembly window. Even updates of its content are
handled by the source window, so it really has no life of its own.
This patch removes this window entirely and puts its functionality
directly into the source window. This simplifies the code somewhat.
This is a user-visible change, because now the box around the source
(or disassembly) window encloses the execution info as well. I
consider this an improvement as well, though.
Note that this patch caused ncurses to start emitting the "CSI Z"
sequence, so I've added this to the test suite terminal
implementation.
gdb/ChangeLog
2019-08-16 Tom Tromey <tom@tromey.com>
Tom Tromey [Fri, 12 Jul 2019 00:19:28 +0000 (18:19 -0600)]
Remove "noerror" parameter from some TUI functions
A few TUI functions take a "noerror" parameter. This is only checked
in one spot: in tui_set_source_content, if noerror is false, and if an
error occurs, then the function will call print_sys_errmsg.
This seems misguided to me, so this patch removes that code and this
parameter.
gdb/ChangeLog
2019-08-16 Tom Tromey <tom@tromey.com>
Tom Tromey [Fri, 12 Jul 2019 00:03:45 +0000 (18:03 -0600)]
Remove separate visibility flag
TUI windows keep track of their visibility in a boolean field.
However, this is not needed, because a window is visible if and only
if it has an underlying curses handle. So, we can remove this
separate field.
gdb/ChangeLog
2019-08-16 Tom Tromey <tom@tromey.com>
Martin Liska [Fri, 16 Aug 2019 11:14:36 +0000 (13:14 +0200)]
Fix detection of missing plugin for LTO objects.
2019-08-16 Martin Liska <mliska@suse.cz>
PR ld/24912
* elflink.c: Report error only for not relocatable.
* linker.c (_bfd_generic_link_add_one_symbol): Do not handle
here lto_slim_object as it's handled in caller.
2019-08-16 Martin Liska <mliska@suse.cz>
PR ld/24912
* object.cc (big_endian>::do_layout): Do not report error,
but only set a flag.
(big_endian>::do_add_symbols): Report error only for when
relocatable.
Alan Hayward [Fri, 16 Aug 2019 09:19:18 +0000 (10:19 +0100)]
Move [PAC] into a new MI field addr_flags
Add a new print_pc which prints both the PC and a new field addr_flags.
Call this wherever the PC is printed in stack.c.
Add a new gdbarch method get_pc_address_flags to obtain the addr_flag
contents. By default returns an empty string, on AArch64 this returns
PAC if the address has been masked in the frame.
Document this in the manual and NEWS file.
gdb/ChangeLog:
* NEWS (Other MI changes): New subsection.
* aarch64-tdep.c (aarch64_get_pc_address_flags): New function.
(aarch64_gdbarch_init): Add aarch64_get_pc_address_flags.
* arch-utils.c (default_get_pc_address_flags): New function.
* arch-utils.h (default_get_pc_address_flags): New declaration.
* gdbarch.sh: Add get_pc_address_flags.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* stack.c (print_pc): New function.
(print_frame_info) (print_frame): Call print_pc.
Alan Modra [Fri, 16 Aug 2019 03:50:28 +0000 (13:20 +0930)]
PowerPC gcc bootstrap fail with bss-plt
git commit 3e04d7655b introduced a bug by sizing output sections
earlier in ppc_before_allocation. That meant PLT (and GOT) sizes were
not included when calculating total executable section sizes.
* emultempl/ppc32elf.em (ppc_before_allocation): Force running
prelim_size_sections before deciding whether branch trampolines
might be needed.
Alan Modra [Wed, 14 Aug 2019 07:01:05 +0000 (16:31 +0930)]
Aligned vs. unaligned ppc32 relocs
Given R_PPC_ADDR32 or R_PPC_UADDR32 relocs, this patch generates
R_PPC_ADDR32 or R_PPC_UADDR32 dynamic relocs from either type
depending on whether r_offset is 4-byte aligned, and similarly for
R_PPC_ADDR16/R_PPC_UADDR16.
Sandra Loosemore [Fri, 16 Aug 2019 01:15:16 +0000 (18:15 -0700)]
Fix paste-o in examine-backward.exp.
This patch fixes a paste-o that was introduced in commit c8ad9b9a31aa3e6039567fc1f152dd454c946d5f. Previously the regexp for
the "examine 3 bytes backward from ${address_zero}" test correctly
matched 3 "${byte}" patterns, but in that commit the 6-byte regexp
from the previous test was mistakenly repeated here instead.
projects / thirdparty / binutils-gdb.git / log
