* pm-cpufreq: (25 commits)
dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu
cpufreq: Add Kryo CPU scaling driver
cpufreq: Use static SRCU initializer
kernel/SRCU: provide a static initializer
cpufreq: Fix new policy initialization during limits updates via sysfs
cpufreq: tegra20: Wrap cpufreq into platform driver
cpufreq: tegra20: Allow cpufreq driver to be built as loadable module
cpufreq: tegra20: Check if this is Tegra20 machine
cpufreq: tegra20: Remove unneeded variable initialization
cpufreq: tegra20: Remove unnecessary parentheses
cpufreq: tegra20: Remove unneeded check in tegra_cpu_init
cpufreq: tegra20: Release clocks properly
cpufreq: tegra20: Remove EMC clock usage
cpufreq: tegra20: Clean up included headers
cpufreq: tegra20: Clean up whitespaces in the code
cpufreq: tegra20: Change module description
Revert "cpufreq: rcar: Add support for R8A7795 SoC"
Revert "cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver"
cpufreq: intel_pstate: allow trace in passive mode
cpufreq: optimize cpufreq_notify_transition()
...
* pm-opp: (24 commits)
PM / Domains: Drop unused parameter in genpd_allocate_dev_data()
PM / Domains: Drop genpd as in-param for pm_genpd_remove_device()
PM / Domains: Drop __pm_genpd_add_device()
PM / Domains: Drop extern declarations of functions in pm_domain.h
PM / domains: Add perf_state attribute to genpd debugfs
OPP: Allow same OPP table to be used for multiple genpd
PM / Domain: Return 0 on error from of_genpd_opp_to_performance_state()
PM / OPP: Fix shared OPP table support in dev_pm_opp_register_set_opp_helper()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_regulators()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_prop_name()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_supported_hw()
PM / OPP: silence an uninitialized variable warning
PM / OPP: Remove dev_pm_opp_{un}register_get_pstate_helper()
PM / OPP: Get performance state using genpd helper
PM / Domain: Implement of_genpd_opp_to_performance_state()
PM / Domain: Add support to parse domain's OPP table
PM / Domain: Add struct device to genpd
PM / OPP: Implement dev_pm_opp_get_of_node()
PM / OPP: Implement of_dev_pm_opp_find_required_opp()
PM / OPP: Implement dev_pm_opp_of_add_table_indexed()
...
* pm-domains:
PM / domains: Improve wording of dev_pm_domain_attach() comment
PM / Domains: Don't return -EEXIST at attach when PM domain exists
spi: Respect all error codes from dev_pm_domain_attach()
soundwire: Respect all error codes from dev_pm_domain_attach()
mmc: sdio: Respect all error codes from dev_pm_domain_attach()
i2c: Respect all error codes from dev_pm_domain_attach()
driver core: Respect all error codes from dev_pm_domain_attach()
amba: Respect all error codes from dev_pm_domain_attach()
PM / Domains: Allow a better error handling of dev_pm_domain_attach()
PM / Domains: Check for existing PM domain in dev_pm_domain_attach()
PM / Domains: Drop redundant code in genpd while attaching devices
PM / Domains: Drop comment in genpd about legacy Samsung DT binding
PM / Domains: Fix error path during attach in genpd
* pm-qos:
PM / QoS: Drop redundant declaration of pm_qos_get_value()
* pm-core:
PM / runtime: Drop usage count for suppliers at device link removal
PM / runtime: Fixup reference counting of device link suppliers at probe
PM: wakeup: Use pr_debug() for the "aborting suspend" message
PM / core: Drop unused internal inline functions for sysfs
PM / core: Drop unused internal functions for pm_qos sysfs
PM / core: Drop unused internal inline functions for wakeirqs
PM / core: Drop internal unused inline functions for wakeups
PM / wakeup: Only update last time for active wakeup sources
PM / wakeup: Use seq_open() to show wakeup stats
PM / core: Use dev_printk() and symbols in suspend/resume diagnostics
PM / core: Simplify initcall_debug_report() timing
PM / core: Remove unused initcall_debug_report() arguments
PM / core: fix deferred probe breaking suspend resume order
Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat utility updates for v4.18 from Len Brown.
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (65 commits)
tools/power turbostat: update version number
tools/power turbostat: Add Node in output
tools/power turbostat: add node information into turbostat calculations
tools/power turbostat: remove num_ from cpu_topology struct
tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node
tools/power turbostat: track thread ID in cpu_topology
tools/power turbostat: Calculate additional node information for a package
tools/power turbostat: Fix node and siblings lookup data
tools/power turbostat: set max_num_cpus equal to the cpumask length
tools/power turbostat: if --num_iterations, print for specific number of iterations
tools/power turbostat: Add Cannon Lake support
tools/power turbostat: delete duplicate #defines
x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: add POLL and POLL% column
tools/power turbostat: Fix --hide Pk%pc10
tools/power turbostat: Build-in "Low Power Idle" counters support
tools/power turbostat: Don't make man pages executable
tools/power turbostat: remove blank lines
tools/power turbostat: a small C-states dump readability immprovement
...
Prarit Bhargava [Fri, 1 Jun 2018 14:04:32 +0000 (10:04 -0400)]
tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node
turbostat incorrectly assumes that there is one node per package. As a
result num_cores_per_pkg is not correctly named and is actually
num_cores_per_node.
Rename num_cores_per_pkg to num_cores_per_node.
Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
Prarit Bhargava [Fri, 1 Jun 2018 14:04:31 +0000 (10:04 -0400)]
tools/power turbostat: track thread ID in cpu_topology
The code can be simplified if the cpu_topology *cpus tracks the thread
IDs. This removes an additional file lookup and simplifies the counter
initialization code.
Add thread ID to cpu_topology information and cleanup the counter
initialization code.
v2: prevent thread_id from being overwritten
Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
Prarit Bhargava [Fri, 1 Jun 2018 14:04:30 +0000 (10:04 -0400)]
tools/power turbostat: Calculate additional node information for a package
The code currently assumes each package has exactly one node. This is not
the case for AMD systems and Intel systems with COD. AMD systems also
may re-enumerate each node's core IDs starting at 0 (for example, an AMD
processor may have two nodes, each with core IDs from 0 to 7). In order
to properly enumerate the cores we need to track both the physical and
logical node IDs.
Add physical_node_id to track the node ID assigned by the kernel, and
logical_node_id used by turbostat to track the nodes per package ie) a
0-based count within the package.
Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sat, 2 Jun 2018 02:08:58 +0000 (22:08 -0400)]
tools/power turbostat: Fix node and siblings lookup data
The turbostat code only looks at thread_siblings_list to determine if
processing units/threads are on the same the core. This works well on
Intel systems which have a shared L1 instruction and data cache. This
does not work on AMD systems which have shared L1 instruction cache but
separate L1 data caches. Other utilities also check sibling's core ID
to determine if the processing unit shares the same core.
Additionally, the cpu_topology *cpus list used in topology_probe() can
be used elsewhere in the code to simplify things.
Export *cpus to the entire turbostat code, and add Processing Unit/Thread
IDs information to each cpu_topology struct. Confirm that the thread
is on the same core as indicated by thread_siblings_list.
[v2]: Fixup CPU_* usage that caused gcc malloc error.
Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
Prarit Bhargava [Fri, 1 Jun 2018 14:04:28 +0000 (10:04 -0400)]
tools/power turbostat: set max_num_cpus equal to the cpumask length
Future fixes will use sysfs files that contain cpumask output. The code
needs to know the length of the cpumask in order to determine which cpus
are set in a cpumask. Currently topo.max_cpu_num is the maximum cpu
number. It can be increased the the maximum value of cpus represented in
cpumasks.
Set max_num_cpus to the length of a cpumask.
Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
tools/power turbostat: if --num_iterations, print for specific number of iterations
There's a use case during test to only print specific round of iterations
if --num_iterations is specified, for example, with this patch applied:
turbostat -i 5 -n 4
will capture 4 samples with 5 seconds interval.
[lenb: renamed to --num_iterations from --iterations]
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
All MSRs related to turbostat are same as Kabylake.
Even though SDM claims that core C3 residency can be read from MSR 0x662,
the read on this MSR fails on CNL platform. Hence disabled C3 MSR read
and display.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Fri, 1 Jun 2018 17:04:18 +0000 (13:04 -0400)]
tools/power turbostat: delete duplicate #defines
The SNB_C1_AUTO_UNDEMOTE definition should have been deleted once
it was copied into msr-index.h. One copy of the truth is better --
particularly when Matt needs to fix it:-)
According to the Intel Software Developers' Manual, Vol. 4, Order No.
335592, these macros have been reversed since they were added in the
initial turbostat commit. The reversed definitions were presumably
copied from turbostat.c to this file.
Fixes: 9c63a650bb10 ("tools/power/x86/turbostat: share kernel MSR #defines") Signed-off-by: Matt Turner <mattst88@gmail.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Len Brown <len.brown@intel.com>
According to the Intel Software Developers' Manual, Vol. 4, Order No.
335592, these macros have been reversed since they were added.
Fixes: 889facbee3e6 ("tools/power turbostat: v3.0: monitor Watts and Temperature") Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Mon, 29 Jan 2018 04:42:42 +0000 (23:42 -0500)]
tools/power turbostat: Fix --hide Pk%pc10
The column header for PC10 residency is "Pk%pc10"
This is missing the 'g' that others have, eg Pkg%pc6,
to allow tab-delimited columns to fit into 8-columns.
However, --hide Pk%pc10 did not work, it was still looking for the 'g'.
This was confusing, because --list shows the correct "Pk%pc10"
Reported-by: Wendy Wang <wendy.wang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Fri, 1 Jun 2018 16:35:53 +0000 (12:35 -0400)]
tools/power turbostat: Build-in "Low Power Idle" counters support
Linux 4.15 exports the ACPI Low Power Idle Table's
counters in /sys/devices/system/cpu/cpuidle/
low_power_idle_cpu_residency_us
Show this in the "CPU%LPI" column.
Today this reflects the "North Complex"
residency in PC10, so expect it to
closely follow "Pk%pc10".
low_power_idle_system_residency_us
Show this in the "SYS%LPI" column.
Today, this reflects the North is in PC10,
plus the PCH is sufficiently quiescent
to save additional power via the "S0ix"
system state, as measured by the
PCH SLP_S0 counter.
Len Brown [Sun, 28 Jan 2018 03:39:21 +0000 (22:39 -0500)]
tools/power turbostat: remove blank lines
When the user reuests to collect and show columns
that are not present on every row (eg. for every CPU)
turbostat still prints an (empty) line for every CPU.
Update so no blank lines are printed.
tools/power turbostat: dump BDX, SKX automatic C-state conversion bit
BDX and SKX have a bit that tells them to PROMOTE shallow
C-states requests to MWAIT(C6). It is generally a BIOS bug
if this bit is set. As we have encountered that BIOS bug,
let's print this bit in turbostat debug output.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
The recent patch that implements table printing on a keypress introduced a
regression - turbostat prints the table almost continuously if it is run from a
daemon program.
The problem is also easy to reproduce like this:
echo | turbostat
The reason is that we cannot assume that stdin is always a TTY. It can be many
things.
This patch adds fixes the problem by limiting the new keypress functionality to
TTYs only. If stdin is not a TTY, we just sleep for the full interval time.
While on it, clean-up 'do_sleep()' to return no value, as callers do not expect
that anyway.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Wed, 19 Jul 2017 23:28:37 +0000 (19:28 -0400)]
tools/power turbostat: end current interval upon newline input
In turbostat interval mode, a newline typed on standard input
will now conclude the current interval. Data will immediately
be collected and printed for that interval, and the next interval
will be started.
This is similar to the recently added SIGUSR1 feature.
But that is for use by programs, while this is for interactive use.
Len Brown [Sat, 15 Jul 2017 19:51:26 +0000 (15:51 -0400)]
tools/power turbostat: on SIGUSR1: sample, print and continue
Interval-mode turbostat now catches and discards SIGUSR1.
Thus, SIGUSR1 can be used to tell turbostat to cut short
the current measurement interval. Turbostat will then start
the next measurement interval using the regular interval length.
This can be used to give turbostat variable intervals.
Invoke turbostat with --interval LARGE_NUMBER_SEC
and have a program that has permission to send it a SIGUSR1
always before LARGE_NUMBER_SEC expires.
It may also be useful to use "--enable Time_Of_Day_Seconds"
to observe the actual interval length.
Add a Time_Of_Day_Seconds column showing when measurement
for each row was completed. Units are [sec.subsec] since Epoch,
as reported by gettimeofday(2).
While useful to correlate turbostat output with other tools,
this built-in column is disabled, by default.
Add the "--enable" option to enable such disabled-by-default
built-in columns:
"--enable Time_Of_Day_Seconds"
"--enable usec"
"--enable all", will enable all disabled-by-defauilt built-in counters.
When "--debug" is used, all disabled-by-default columns are enabled,
unless explicitly skipped using "--hide"
Turbostat neglects to display all package C-states for some Skylake Xeon BIOS configurations.
This is due to a typo in the table decoding MSR_PKG_CST_CONFIG_CONTROL (0x000000e2)
Here we fix that typo, according to Intel SDM, vol 4, Table 2-41 -
"MSRs Supported by Intel® Xeon® Processor Scalable Family with DisplayFamily_DisplayModel 06_55H".
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Thu, 31 May 2018 21:23:07 +0000 (16:23 -0500)]
Merge tag 'xfs-4.17-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fix from Darrick Wong:
"Clear out i_mapping error state when we're reinitializing inodes.
This last minute fix prevents writeback error state from persisting
past the end of the in-core inode lifecycle and causing EIO errors to
be reported to userspace when no error has occurred.
This fix for the behavioral regression has been soaking in for-next
for a while, but various fs developers persuaded me to try to get it
upstream for 4.17 because the patch that broke things was introduced
in 4.17-rc4"
* tag 'xfs-4.17-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fs: clear writeback errors in inode_init_always
Linus Torvalds [Thu, 31 May 2018 14:39:57 +0000 (09:39 -0500)]
Merge tag 'platform-drivers-x86-v4.17-4' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fix from Andy Shevchenko:
"Fix NULL pointer dereference in asus-wmi on rfkill cleanup.
The effective change is just one new condition - two lines of code.
But it required moving one static helper function, which is why the
diff looks a bit bigger"
* tag 'platform-drivers-x86-v4.17-4' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: asus-wmi: Fix NULL pointer dereference
Do not perform the rfkill cleanup routine when
(asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since
nothing is registered with the rfkill subsystem in that case. Doing so
leads to the following kernel NULL pointer dereference:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120
PGD 1a3aa8067
PUD 1a3b3d067
PMD 0
Reported-by: red.f0xyz@gmail.com Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Darrick J. Wong [Thu, 31 May 2018 02:43:53 +0000 (19:43 -0700)]
fs: clear writeback errors in inode_init_always
In inode_init_always(), we clear the inode mapping flags, which clears
any retained error (AS_EIO, AS_ENOSPC) bits. Unfortunately, we do not
also clear wb_err, which means that old mapping errors can leak through
to new inodes.
This is crucial for the XFS inode allocation path because we recycle old
in-core inodes and we do not want error state from an old file to leak
into the new file. This bug was discovered by running generic/036 and
generic/047 in a loop and noticing that the EIOs generated by the
collision of direct and buffered writes in generic/036 would survive the
remount between 036 and 047, and get reported to the fsyncs (on
different files!) in generic/047.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com>
Linus Torvalds [Wed, 30 May 2018 21:35:07 +0000 (16:35 -0500)]
Merge tag 'selinux-pr-20180530' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fix from Paul Moore:
"One more small fix for SELinux: a small string length fix found by
KASAN.
I dislike sending patches this late in the release cycle, but this
patch fixes a legitimate problem, is very small, limited in scope, and
well understood.
There are two threads with more information on the problem, the latest
is linked below:
'Such a setxattr() call can only be performed by a process with
CAP_MAC_ADMIN that is also allowed mac_admin permission in SELinux
policy. Consequently, this is never possible on Android (no process
is allowed mac_admin permission, always enforcing) and is only
possible in Fedora/RHEL for a few domains (if enforcing)'"
* tag 'selinux-pr-20180530' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: KASAN: slab-out-of-bounds in xattr_getsecurity
There is some code duplication related to the PM QoS handling between
the existing cpuidle governors, so move that code to a common helper
function and call that from the governors.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpuidle: governors: Drop redundant checks related to PM QoS
PM_QOS_RESUME_LATENCY_NO_CONSTRAINT is defined as the 32-bit integer
maximum, so it is not necessary to test the return value of
dev_pm_qos_raw_read_value() against it directly in the menu and
ladder cpuidle governors.
Drop these redundant checks.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Wed, 30 May 2018 15:30:30 +0000 (10:30 -0500)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- a missing -msoft-float for the compile of the kexec purgatory
- a fix for the dasd driver to avoid the double use of a field in the
'struct request'
[ That latter one is being discussed, and Christoph asked for something
cleaner, but for now it's a fix ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: use blk_mq_rq_from_pdu for per request data
s390/purgatory: Fix endless interrupt loop
Ulf Hansson [Tue, 29 May 2018 10:04:15 +0000 (12:04 +0200)]
PM / Domains: Drop genpd as in-param for pm_genpd_remove_device()
There is no need to pass a genpd struct to pm_genpd_remove_device(), as we
already have the information about the PM domain (genpd) through the device
structure.
Additionally, we don't allow to remove a PM domain from a device, other
than the one it may have assigned to it, so really it does not make sense
to have a separate in-param for it.
For these reason, drop it and update the current only call to
pm_genpd_remove_device() from amdgpu_acp.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ulf Hansson [Tue, 29 May 2018 10:04:13 +0000 (12:04 +0200)]
PM / Domains: Drop extern declarations of functions in pm_domain.h
Using "extern" to declare a function in a public header file is somewhat
pointless, but also doesn't hurt. However, to make all the function
declarations in pm_domain.h to be consistent, let's drop the use of
"extern".
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rajendra Nayak [Wed, 30 May 2018 09:45:17 +0000 (15:15 +0530)]
PM / domains: Add perf_state attribute to genpd debugfs
Now that genpd supports performance states, add this additional
attribute as part of the power domains debugfs entry, to display
the current performance state for the Power domain.
Suggested-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge branch 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-opp
Pull more OPP updates for v4.18 from Viresh Kumar.
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: Allow same OPP table to be used for multiple genpd
PM / OPP: Fix shared OPP table support in dev_pm_opp_register_set_opp_helper()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_regulators()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_prop_name()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_supported_hw()
The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
to provide the OPP framework with required information.
This is used to determine the voltage and frequency value for each OPP of
operating-points-v2 table when it is parsed by the OPP framework.
This change adds documentation for the DT bindings.
The "operating-points-v2-kryo-cpu" DT extends the "operating-points-v2"
with following parameters:
- nvmem-cells (NVMEM area containig the speedbin information)
- opp-supported-hw: A single 32 bit bitmap value,
representing compatible HW:
0: MSM8996 V3, speedbin 0
1: MSM8996 V3, speedbin 1
2: MSM8996 V3, speedbin 2
3: unused
4: MSM8996 SG, speedbin 0
5: MSM8996 SG, speedbin 1
6: MSM8996 SG, speedbin 2
7-31: unused
Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ilia Lin [Wed, 30 May 2018 02:39:28 +0000 (05:39 +0300)]
cpufreq: Add Kryo CPU scaling driver
In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
the CPU frequency subset and voltage value of each OPP varies
based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
defines the voltage and frequency value based on the msm-id in SMEM
and speedbin blown in the efuse combination.
The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
to provide the OPP framework with required information.
This is used to determine the voltage and frequency value for each OPP of
operating-points-v2 table when it is parsed by the OPP framework.
Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Viresh Kumar [Wed, 30 May 2018 09:49:38 +0000 (15:19 +0530)]
OPP: Allow same OPP table to be used for multiple genpd
The OPP binding says:
Property: operating-points-v2
...
This can contain more than one phandle for power domain
providers that provide multiple power domains. That is, one
phandle for each power domain. If only one phandle is available,
then the same OPP table will be used for all power domains
provided by the power domain provider.
But the OPP core isn't allowing the same OPP table to be used for
multiple domains. Update dev_pm_opp_of_add_table_indexed() to allow
that.
Use the static SRCU initializer for `cpufreq_transition_notifier_list'.
This avoids the init_cpufreq_transition_notifier_list() initcall. Its
only purpose is to initialize the SRCU notifier once during boot and set
another variable which is used as an indicator whether the init was
perfromed before cpufreq_register_notifier() was used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are macros for static initializer for the three out of four
possible notifier types, that are:
ATOMIC_NOTIFIER_HEAD()
BLOCKING_NOTIFIER_HEAD()
RAW_NOTIFIER_HEAD()
This patch provides a static initilizer for the forth type to make it
complete.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tao Wang [Sat, 26 May 2018 07:16:48 +0000 (15:16 +0800)]
cpufreq: Fix new policy initialization during limits updates via sysfs
If the policy limits are updated via cpufreq_update_policy() and
subsequently via sysfs, the limits stored in user_policy may be
set incorrectly.
For example, if both min and max are set via sysfs to the maximum
available frequency, user_policy.min and user_policy.max will also
be the maximum. If a policy notifier triggered by
cpufreq_update_policy() lowers both the min and the max at this
point, that change is not reflected by the user_policy limits, so
if the max is updated again via sysfs to the same lower value,
then user_policy.max will be lower than user_policy.min which
shouldn't happen. In particular, if one of the policy CPUs is
then taken offline and back online, cpufreq_set_policy() will
fail for it due to a failing limits check.
To prevent that from happening, initialize the min and max fields
of the new_policy object to the ones stored in user_policy that
were previously set via sysfs.
Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Wed, 30 May 2018 03:22:15 +0000 (22:22 -0500)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"We are switching a bunch of Lenovo devices with Synaptics touchpads
from PS/2 emulation over to native RMI/SMbus.
Given that all commits are marked for stable there is no point
delaying them till next release"
[ Also fix a too-small stack array for i2c communication in elan driver ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c_smbus - fix corrupted stack
Input: synaptics - add Lenovo 80 series ids to SMBus
Input: synaptics - add Intertouch support on X1 Carbon 6th and X280
Input: synaptics - Lenovo Thinkpad X1 Carbon G5 (2017) with Elantech trackpoints should use RMI
Input: synaptics - Lenovo Carbon X1 Gen5 (2017) devices should use RMI
If user get root access and calls security.selinux setxattr() with an
embedded NUL on a file and then if some process performs a getxattr()
on that file with a length greater than the actual length of the string,
it would result in a panic.
To fix this, add the actual length of the string to the security context
instead of the length passed by the userspace process.
Signed-off-by: Sachin Grover <sgrover@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by: Paul Moore <paul@paul-moore.com>
Max Gurtovoy [Sun, 27 May 2018 15:50:10 +0000 (18:50 +0300)]
nvme: fix extended data LBA supported setting
This value depands on the metadata support value, so reorder the
initialization to fit.
Fixes: b5be3b392 ("nvme: always unregister the integrity profile in __nvme_revalidate_disk") Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org
Linus Torvalds [Tue, 29 May 2018 12:28:48 +0000 (07:28 -0500)]
Merge tag 'trace-v4.17-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While writing selftests for a new feature, I triggered two existing
bugs that deal with triggers and instances.
- a generic trigger bug where the triggers are not removed from a
linked list properly when deleting an instance.
- a bug specific to snapshots, where the snapshot is done in the top
level buffer, when it is supposed to snapshot the buffer associated
to the instance the snapshot trigger exists in"
* tag 'trace-v4.17-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Make the snapshot trigger work with instances
tracing: Fix crash when freeing instances with event triggers
tracing: Make the snapshot trigger work with instances
The snapshot trigger currently only affects the main ring buffer, even when
it is used by the instances. This can be confusing as the snapshot trigger
is listed in the instance.
> # cd /sys/kernel/tracing
> # mkdir instances/foo
> # echo snapshot > instances/foo/events/syscalls/sys_enter_fchownat/trigger
> # echo top buffer > trace_marker
> # echo foo buffer > instances/foo/trace_marker
> # touch /tmp/bar
> # chown rostedt /tmp/bar
> # cat instances/foo/snapshot
# tracer: nop
#
#
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
Linus Torvalds [Mon, 28 May 2018 12:25:57 +0000 (05:25 -0700)]
Merge tag 'nds32-for-linus-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux
Pull nds32 fixes from Greentime Hu:
"Bug fixes and build error fixes for nds32"
* tag 'nds32-for-linus-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
nds32: Fix compiler warning, Wstringop-overflow, in vdso.c
nds32: Disable local irq before calling cpu_dcache_wb_page in copy_user_highpage
nds32: Flush the cache of the page at vmaddr instead of kaddr in flush_anon_page
nds32: Correct flush_dcache_page function
nds32: Fix the unaligned access handler
nds32: Renaming the file for unaligned access
nds32: To fix a cache inconsistency issue by setting correct cacheability of NTC
nds32: To refine readability of INT_MASK_INITAIAL_VAL
nds32: Fix the virtual address may map too much range by tlbop issue.
nds32: Fix the allmodconfig build. To make sure CONFIG_CPU_LITTLE_ENDIAN is default y
nds32: Fix build failed because arch_trace_hardirqs_off is changed to trace_hardirqs_off.
nds32: Fix the unknown type u8 issue.
nds32: Fix the symbols undefined issue by exporting them.
nds32: Fix xfs_buf built failed by export invalidate_kernel_vmap_range and flush_kernel_vmap_range
nds32: Fix drivers/gpu/drm/udl/udl_fb.c building error by defining PAGE_SHARED
nds32: Fix building error of crypto/xor.c by adding xor.h
nds32: Fix building error when CONFIG_FREEZE is enabled.
nds32: lib: To use generic lib instead of libgcc to prevent the symbol undefined issue.
Linus Torvalds [Sun, 27 May 2018 16:27:27 +0000 (09:27 -0700)]
Merge tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- enable '-fno-tree-loop-im' only when supported
- add '-fno-PIE' option before the asm-goto test
* tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Makefile: disable PIE before testing asm goto
kbuild: gcov: enable -fno-tree-loop-im if supported
Ulf Hansson [Thu, 24 May 2018 08:33:36 +0000 (10:33 +0200)]
PM / runtime: Drop usage count for suppliers at device link removal
In the case consumer device is runtime resumed, while the link to the
supplier is removed, the earlier call to pm_runtime_get_sync() made from
rpm_get_suppliers() does not get properly balanced with a corresponding
call to pm_runtime_put(). This leads to that suppliers remains to be
runtime resumed forever, while they don't need to.
Let's fix the behaviour by calling rpm_put_suppliers() when dropping a
device link. Not that, since rpm_put_suppliers() checks the
link->rpm_active flag, we can correctly avoid to call pm_runtime_put() in
cases when we shouldn't.
Reported-by: Todor Tomov <todor.tomov@linaro.org> Fixes: 21d5c57b3726 (PM / runtime: Use device links) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ulf Hansson [Fri, 18 May 2018 08:48:49 +0000 (10:48 +0200)]
PM / runtime: Fixup reference counting of device link suppliers at probe
In the driver core, before it invokes really_probe() it runtime resumes the
suppliers for the device via calling pm_runtime_get_suppliers(), which also
increases the runtime PM usage count for each of the available supplier.
This makes sense, as to be able to allow the consumer device to be probed
by its driver. However, if the driver decides to add a new supplier link
during ->probe(), hence updating the list of suppliers, the following call
to pm_runtime_put_suppliers(), invoked after really_probe() in the driver
core, we get into trouble.
More precisely, pm_runtime_put() gets called also for the new supplier(s),
which is wrong as the driver core, didn't trigger pm_runtime_get_sync() to
be called for it in the first place. In other words, the new supplier may
be runtime suspended even in cases when it shouldn't.
Fix this behaviour, by runtime resume suppliers according to the same
conditions as managed by the runtime PM core, when runtime resume callbacks
are being invoked.
Additionally, don't try to runtime suspend any of the suppliers after
really_probe(), but instead rely on that to happen via the consumer device,
when it becomes runtime suspended.
Fixes: 21d5c57b3726 (PM / runtime: Use device links) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Todd E Brandt [Thu, 24 May 2018 16:36:28 +0000 (09:36 -0700)]
PM / tools: pm-graph: upgrade to v5.1
general changes:
- make python dependent on version2 to enable clearlinux
- upgrade dmesg error/warning extraction to be more detailed
- enable logs generated from -cmd runs to be processed in gzip form
- add notification on power mode entry failure into the timeline
- add -battery option to show if battery is connected and its charge
summary changes (output of -summary):
- add -genhtml option to regenerate missing timelines from logs found
- add min/max/median/avg data to the summary page with links to the data
- add highlight to minimum, maximum, and median tests
- add result column to summary (pass or fail) with red highlight on fail
- add issues column to summary with a list of dmesg err/warn/bugs
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tetsuo Handa [Sat, 26 May 2018 00:59:36 +0000 (09:59 +0900)]
PM / hibernate: Fix oops at snapshot_write()
syzbot is reporting NULL pointer dereference at snapshot_write() [1].
This is because data->handle is zero-cleared by ioctl(SNAPSHOT_FREE).
Fix this by checking data_of(data->handle) != NULL before using it.
The `s2idle_lock' is acquired during suspend while interrupts are
disabled even on RT. The lock is acquired for short sections only.
Make it a RAW lock which avoids "sleeping while atomic" warnings on RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
s2idle_wait_head is used during s2idle with interrupts disabled even on
RT. There is no "custom" wake up function so swait could be used instead
which is also lower weight compared to the wait_queue.
Make s2idle_wait_head a swait_queue_head.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The `events_lock' is acquired during suspend while interrupts are
disabled even on RT. The lock is taken only for a very brief moment.
Make it a RAW lock which avoids "sleeping while atomic" warnings on RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Thomas Gleixner [Fri, 25 May 2018 15:54:41 +0000 (17:54 +0200)]
PM / suspend: Prevent might sleep splats
timekeeping suspend/resume calls read_persistent_clock() which takes
rtc_lock. That results in might sleep warnings because at that point
we run with interrupts disabled.
We cannot convert rtc_lock to a raw spinlock as that would trigger
other might sleep warnings.
As a workaround we disable the might sleep warnings by setting
system_state to SYSTEM_SUSPEND before calling sysdev_suspend() and
restoring it to SYSTEM_RUNNING afer sysdev_resume(). There is no lock
contention because hibernate / suspend to RAM is single-CPU at this
point.
In s2idle's case the system_state is set to SYSTEM_SUSPEND before
timekeeping_suspend() which is invoked by the last CPU. In the resume
case it set back to SYSTEM_RUNNING after timekeeping_resume() which is
invoked by the first CPU in the resume case. The other CPUs will block
on tick_freeze_lock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bigeasy: cover s2idle in tick_freeze() / tick_unfreeze()] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Sat, 26 May 2018 20:24:16 +0000 (13:24 -0700)]
Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 store buffer fixes from Thomas Gleixner:
"Two fixes for the SSBD mitigation code:
- expose SSBD properly to guests. This got broken when the CPU
feature flags got reshuffled.
- simplify the CPU detection logic to avoid duplicate entries in the
tables"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Simplify the CPU bug detection logic
KVM/VMX: Expose SSBD properly to guests
Linus Walleij [Sat, 26 May 2018 16:37:34 +0000 (18:37 +0200)]
ARM: Fix i2c-gpio GPIO descriptor tables
I used bad names in my clumsiness when rewriting many board
files to use GPIO descriptors instead of platform data. A few
had the platform_device ID set to -1 which would indeed give
the device name "i2c-gpio".
But several had it set to >=0 which gives the names
"i2c-gpio.0", "i2c-gpio.1" ...
Fix the offending instances in the ARM tree. Sorry for the
mess.
Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors") Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Simon Guinot <simon.guinot@sequanux.org> Reported-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Antoine Tenart [Thu, 17 May 2018 13:22:14 +0000 (15:22 +0200)]
crypto: inside-secure - do not use memset on MMIO
This patch fixes the Inside Secure driver which uses a memtset() call to
set an MMIO area from the cryptographic engine to 0. This is wrong as
memset() isn't guaranteed to work on MMIO for many reasons. This led to
kernel paging request panics in certain cases. Use memset_io() instead.
Linus Torvalds [Sat, 26 May 2018 03:24:28 +0000 (20:24 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: fix memory hotplug during boot
kasan: free allocated shadow memory on MEM_CANCEL_ONLINE
checkpatch: fix macro argument precedence test
init/main.c: include <linux/mem_encrypt.h>
kernel/sys.c: fix potential Spectre v1 issue
mm/memory_hotplug: fix leftover use of struct page during hotplug
proc: fix smaps and meminfo alignment
mm: do not warn on offline nodes unless the specific node is explicitly requested
mm, memory_hotplug: make has_unmovable_pages more robust
mm/kasan: don't vfree() nonexistent vm_area
MAINTAINERS: change hugetlbfs maintainer and update files
ipc/shm: fix shmat() nil address after round-down when remapping
Revert "ipc/shm: Fix shmat mmap nil-page protection"
idr: fix invalid ptr dereference on item delete
ocfs2: revert "ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio"
mm: fix nr_rotate_swap leak in swapon() error case
In commit c7753208a94c ("x86, swiotlb: Add memory encryption support") a
call to function `mem_encrypt_init' was added. Include prototype
defined in header <linux/mem_encrypt.h> to prevent a warning reported
during compilation with W=1:
init/main.c:494:20: warning: no previous prototype for `mem_encrypt_init' [-Wmissing-prototypes]
Link: http://lkml.kernel.org/r/20180522195533.31415-1-malat@debian.org Signed-off-by: Mathieu Malaterre <malat@debian.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Gargi Sharma <gs051095@gmail.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix this by sanitizing *resource* before using it to index
current->signal->rlim
Notice that given that speculation windows are large, the policy is to
kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.com Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jonathan Cameron [Fri, 25 May 2018 21:47:53 +0000 (14:47 -0700)]
mm/memory_hotplug: fix leftover use of struct page during hotplug
The case of a new numa node got missed in avoiding using the node info
from page_struct during hotplug. In this path we have a call to
register_mem_sect_under_node (which allows us to specify it is hotplug
so don't change the node), via link_mem_sections which unfortunately
does not.
Fix is to pass check_nid through link_mem_sections as well and disable
it in the new numa node path.
Note the bug only 'sometimes' manifests depending on what happens to be
in the struct page structures - there are lots of them and it only needs
to match one of them.
The result of the bug is that (with a new memory only node) we never
successfully call register_mem_sect_under_node so don't get the memory
associated with the node in sysfs and meminfo for the node doesn't
report it.
It came up whilst testing some arm64 hotplug patches, but appears to be
universal. Whilst I'm triggering it by removing then reinserting memory
to a node with no other elements (thus making the node disappear then
appear again), it appears it would happen on hotplugging memory where
there was none before and it doesn't seem to be related the arm64
patches.
These patches call __add_pages (where most of the issue was fixed by
Pavel's patch). If there is a node at the time of the __add_pages call
then all is well as it calls register_mem_sect_under_node from there
with check_nid set to false. Without a node that function returns
having not done the sysfs related stuff as there is no node to use.
This is expected but it is the resulting path that fails...
Exact path to the problem is as follows:
mm/memory_hotplug.c: add_memory_resource()
The node is not online so we enter the 'if (new_node)' twice, on the
second such block there is a call to link_mem_sections which calls
into
drivers/node.c: link_mem_sections() which calls
drivers/node.c: register_mem_sect_under_node() which calls
get_nid_for_pfn and keeps trying until the output of that matches
the expected node (passed all the way down from
add_memory_resource)
It is effectively the same fix as the one referred to in the fixes tag
just in the code path for a new node where the comments point out we
have to rerun the link creation because it will have failed in
register_new_memory (as there was no node at the time). (actually that
comment is wrong now as we don't have register_new_memory any more it
got renamed to hotplug_memory_register in Pavel's patch).
Link: http://lkml.kernel.org/r/20180504085311.1240-1-Jonathan.Cameron@huawei.com Fixes: fc44f7f9231a ("mm/memory_hotplug: don't read nid from struct page during hotplug") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
so we do not insist on allocating from the given node (it is more a
hint) so we can fall back to any other populated node and moreover we
explicitly ask to not warn for the allocation failure.
Soften the warning only to cases when somebody asks for the given node
explicitly by __GFP_THISNODE.
Link: http://lkml.kernel.org/r/20180523125555.30039-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Oscar Salvador <osalvador@techadventures.net> Tested-by: Oscar Salvador <osalvador@techadventures.net> Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / thirdparty / kernel / linux.git / log
