drm/amd/display: fix pixel rate update sequence

The k1/k2 pixel rate dividers in dccg should only be updated on stream enable
and do not actually depend on whether odm combine is active.

This removes an on flip update of these and fixes the calculate function
to ignore odm status for dp steams.

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: reallocate DET for dual displays with high pixel rate ratio"

Revert commit 5f3401eeb064 ("drm/amd/display: reallocate DET for dual displays with high pixel rate ratio")

[Why]
Previously had modified DET allocation algorithm to allocate less DET
segments for lower pixel rate display and more DET segments for higher
pixel rate display.  But noticed it is causing underflow when higher
pixel rate display is not displaying at higher mode

[How]
Roll back change

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: limit DPIA link rate to HBR3

[Why]
DPIA doesn't support UHBR, driver should not enable UHBR
for dp tunneling

[How]
limit DPIA link rate to HBR3

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Peichen Huang <peichen.huang@amd.com>
Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Include CSC updates in new fast update path

[Description]
- Missed color / CSC updates in fast update path
  which caused Custom Color to break.
- Add color / CSC updates to new fast update path
  to fix custom color

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Limit Minimum FreeSync Refresh Rate

Why:
Some EDIDs report a minimum refresh rate lower than what HW can support

How:
Add a check to calculate minimum supported refresh rate with current timing
and use that as the minimum if a lower one is passed in

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Bug fix in dcn315_populate_dml_pipes_from_context

[Why]
When iterating over all pipes in the loop, the CRB allocation algorithm
may potentially skip some of the pipes. Previously, the current pipe
index didn't get updated in this case, causing incorrect outcome.

[How]
Increment the pipe index when skipping over a pipe in the loop.

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Artem Grishin <artem.grishin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Block SubVP + DRR if the DRR is PSR capable

[Description]
PSR implementation in FW has inline polling which can poll for up
to 1ms. This will interfere with SubVP because SubVP is timing
sensitive and can't tolerate up to 1ms worth of delay before
handling vertical or VLINE interrupts. Therefore block SubVP + DRR
cases if DRR is PSR capable

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do not disable phantom pipes in driver

[Why and How]
We should not disable phantom pipes in this sequence, as this should be
controlled by FW. Furthermore, the previous programming sequence would
have enabled the phantom pipe in driver as well, causing corruption.
This change should avoid this from occuring.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Re-enable SubVP high refresh

Re-enable SubVP high refresh now that it is fixed
for displays with high refresh rates.

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Re-enable DPP/HUBP Power Gating

[Why & How]
Bugs preventing DPP/HUBP power gating have been addressed
so this should be reenabled on dcn314 for sufficient
hardware rev versions

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: SubVP high refresh only if all displays >= 120hz

[Description]
- SubVP high refresh should only be enabled if all displays
  are >= 120hz. We do not want to accidentally enables configs
  such as 60hz[SubVP] + 120hz[SubVP]
- Ensure that the SubVP config generation code does not produce
  configs such as 60hz[SubVP] + 120hz[SubVP]
- Also add admissibility checks to ensure these configs do not
  pass as valid configs

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix disbling PSR slow response issue

[Why]
dmub_psr_get_state() return an invalid PSR state while disable
the PSR because convert_psr_state() doesn't recognize the state
that return from DMCUB.

[How]
Add a PSR state to make the dmub_psr_get_state() return a
correct PSR state.

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix the system hang while disable PSR

[Why]
When the PSR enabled. If you try to adjust the timing parameters,
it may cause system hang. Because the timing mismatch with the
DMCUB settings.

[How]
Disable the PSR before adjusting timing parameters.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Promote DAL to 3.2.238

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Error Code for Dml Validation Failure

Any invalid mode from hw perspective should be given corresponding
error code, otherwise it leads to confusing warning message
"[drm] Mode Validation Warning: Validation OK failed validation."

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DP2 Metrics

Why:
Log DP2 data to be used for debugging purposes

How:
Check the reported link rate of the DP connection and
translate it to the DP version.

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add debugfs for allow_edp_hotplug_detection

[Why] within dc_link_detect, edp edid is read only for the first time
and saved. edid will not be read after the first time read. to run edp
edid read test, need read edp edid for each dc_link_detect. dc->config
flag allow_edp_hotplug_detection could be used for edp edid test.

[How] add debugfs for dc->config.allow_edp_hotplug_detection

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: edp do not add non-edid timings

[Why] most edp support only timings from edid. applying
non-edid timings, especially those timings out of edp
bandwidth, may damage edp.

[How] do not add non-edid timings for edp.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: remove TOPDOWN flags when allocating VRAM in large bar system"

This reverts commit c105518679b6e87232874ffc989ec403bee59664.

This patch disables the TOPDOWN flag for APU and few dGPU cards
which has the VRAM size equal to the BAR size.

When we enable the TOPDOWN flag, we get the free blocks at
the highest available memory region and we don't split the
lower order blocks. This change is required to keep off
the fragmentation related issues particularly in ASIC
which has VRAM space <= 500MiB

Hence, we are reverting this patch.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2270
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: expose num_hops and num_links xgmi info through dev attr

Add these two dev attrs for xgmi info details which is helpful for
developers checking the xgmi topology by catting the sys file directly.

Take 4 cards with xgmi connection as an example, get the num_hops for each
device or node through xmig_hive_info dir like,
cat /sys/bus/pci/devices/0000:41:00.0/xgmi_hive_info/node1/num_hops
will return "00 41 41 41" where "00" stands for the hops to node1 itself
and "41" is the hops in hex format to every other node in the same hive.
There are node1/node2/node3/node4 representing 4 cards in the hive.

The same for num_links dev attr.

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: vcn_4_0 set instance 0 init sched score to 1

Only vcn0 can process AV1 codecx. In order to use both vcn0 and
vcn1 in h264/265 transcode to AV1 cases, set vcn0 sched score to 1
at initialization time.

Signed-off-by: Sonny Jiang <sonjiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Disable outputs when releasing fbdev client

Disable the modesetting pipeline before release the radeon's fbdev
client. Fixes the following error:

[   17.217408] WARNING: CPU: 5 PID: 1464 at drivers/gpu/drm/ttm/ttm_bo.c:326 ttm_bo_release+0x27e/0x2d0 [ttm]
[   17.217418] Modules linked in: edac_mce_amd radeon(+) drm_ttm_helper ttm video drm_suballoc_helper drm_display_helper kvm irqbypass drm_kms_helper syscopyarea crc32_pclmul sysfillrect sha512_ssse3 sysimgblt sha512_generic cfbfillrect cfbimgblt wmi_bmof aesni_intel cfbcopyarea crypto_simd cryptd k10temp acpi_cpufreq wmi dm_mod
[   17.217432] CPU: 5 PID: 1464 Comm: systemd-udevd Not tainted 6.4.0-rc4+ #1
[   17.217436] Hardware name: Micro-Star International Co., Ltd. MS-7A38/B450M PRO-VDH MAX (MS-7A38), BIOS B.G0 07/26/2022
[   17.217438] RIP: 0010:ttm_bo_release+0x27e/0x2d0 [ttm]
[   17.217444] Code: 48 89 43 38 48 89 43 40 48 8b 5c 24 30 48 8b b5 40 08 00 00 48 8b 6c 24 38 48 83 c4 58 e9 7a 49 f7 e0 48 89 ef e9 6c fe ff ff <0f> 0b 48 83 7b 20 00 0f 84 b7 fd ff ff 0f 0b 0f 1f 00 e9 ad fd ff
[   17.217448] RSP: 0018:ffffc9000095fbb0 EFLAGS: 00010202
[   17.217451] RAX: 0000000000000001 RBX: ffff8881052c8de0 RCX: 0000000000000000
[   17.217453] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8881052c8de0
[   17.217455] RBP: ffff888104a66e00 R08: ffff8881052c8de0 R09: ffff888104a7cf08
[   17.217457] R10: ffffc9000095fbe0 R11: ffffc9000095fbe8 R12: ffff8881052c8c78
[   17.217458] R13: ffff8881052c8c78 R14: dead000000000100 R15: ffff88810528b108
[   17.217460] FS:  00007f319fcbb8c0(0000) GS:ffff88881a540000(0000) knlGS:0000000000000000
[   17.217463] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   17.217464] CR2: 000055dc8b0224a0 CR3: 000000010373d000 CR4: 0000000000750ee0
[   17.217466] PKRU: 55555554
[   17.217468] Call Trace:
[   17.217470]  <TASK>
[   17.217472]  ? __warn+0x97/0x160
[   17.217476]  ? ttm_bo_release+0x27e/0x2d0 [ttm]
[   17.217481]  ? report_bug+0x1ec/0x200
[   17.217487]  ? handle_bug+0x3c/0x70
[   17.217490]  ? exc_invalid_op+0x1f/0x90
[   17.217493]  ? preempt_count_sub+0xb5/0x100
[   17.217496]  ? asm_exc_invalid_op+0x16/0x20
[   17.217500]  ? ttm_bo_release+0x27e/0x2d0 [ttm]
[   17.217505]  ? ttm_resource_move_to_lru_tail+0x1ab/0x1d0 [ttm]
[   17.217511]  radeon_bo_unref+0x1a/0x30 [radeon]
[   17.217547]  radeon_gem_object_free+0x20/0x30 [radeon]
[   17.217579]  radeon_fbdev_fb_destroy+0x57/0x90 [radeon]
[   17.217616]  unregister_framebuffer+0x72/0x110
[   17.217620]  drm_client_dev_unregister+0x6d/0xe0
[   17.217623]  drm_dev_unregister+0x2e/0x90
[   17.217626]  drm_put_dev+0x26/0x90
[   17.217628]  pci_device_remove+0x44/0xc0
[   17.217631]  really_probe+0x257/0x340
[   17.217635]  __driver_probe_device+0x73/0x120
[   17.217638]  driver_probe_device+0x2c/0xb0
[   17.217641]  __driver_attach+0xa0/0x150
[   17.217643]  ? __pfx___driver_attach+0x10/0x10
[   17.217646]  bus_for_each_dev+0x67/0xa0
[   17.217649]  bus_add_driver+0x10e/0x210
[   17.217651]  driver_register+0x5c/0x120
[   17.217653]  ? __pfx_radeon_module_init+0x10/0x10 [radeon]
[   17.217681]  do_one_initcall+0x44/0x220
[   17.217684]  ? kmalloc_trace+0x37/0xc0
[   17.217688]  do_init_module+0x64/0x240
[   17.217691]  __do_sys_finit_module+0xb2/0x100
[   17.217694]  do_syscall_64+0x3b/0x90
[   17.217697]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[   17.217700] RIP: 0033:0x7f319feaa5a9
[   17.217702] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 08 0d 00 f7 d8 64 89 01 48
[   17.217706] RSP: 002b:00007ffc6bf3e7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   17.217709] RAX: ffffffffffffffda RBX: 00005607204f3170 RCX: 00007f319feaa5a9
[   17.217710] RDX: 0000000000000000 RSI: 00007f31a002eefd RDI: 0000000000000018
[   17.217712] RBP: 00007f31a002eefd R08: 0000000000000000 R09: 00005607204f1860
[   17.217714] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000020000
[   17.217716] R13: 0000000000000000 R14: 0000560720522450 R15: 0000560720255899
[   17.217718]  </TASK>
[   17.217719] ---[ end trace 0000000000000000 ]---

The buffer object backing the fbdev emulation got pinned twice: by the
fb_probe helper radeon_fbdev_create_pinned_object() and the modesetting
code when the framebuffer got displayed. It only got unpinned once by
the fbdev helper radeon_fbdev_destroy_pinned_object(). Hence TTM's BO-
release function complains about the pin counter. Forcing the outputs
off also undoes the modesettings pin increment.

Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Reported-by: Borislav Petkov <bp@alien8.de>
Closes: https://lore.kernel.org/dri-devel/20230603174814.GCZHt83pN+wNjf63sC@fat_crate.local/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: enable W=1 for amdgpu

We have a clean build with W=1 as of
commit c168feed5d03 ("drm/amd/display/amdgpu_dm/amdgpu_dm_helpers: Move
SYNAPTICS_DEVICE_ID into CONFIG_DRM_AMD_DC_DCN ifdef"). So, let's enable
these checks unconditionally for the entire module to catch these errors
during development.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix kdoc warning

Fixes the following gcc with W=1:

drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c:76: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * EEPROM Table structure v1
drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c:98: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * EEPROM Table structrue v2.1

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable dcn314 DPP RCO

[Why and How]
Add back debug bits enabling RCO for dcn314 as underflow
associated with this change has been resolved

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Rename DRM schedulers in amdgpu TTM

Rename mman.entity to mman.high_pr to make the distinction
clearer that this is a high priority scheduler. Similarly,
rename the recently added mman.delayed to mman.low_pr to
make it clear it is a low priority scheduler.
No functional change in this patch.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/amdgpu_dm/amdgpu_dm_helpers: Move SYNAPTICS_DEVICE_ID into CONFIG_DRM_AMD_DC_DCN ifdef

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:48:22: warning: ‘SYNAPTICS_DEVICE_ID’ defined but not used [-Wunused-const-variable=]

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Skip DPP DTO update if root clock is gated

[Why]
Hardware implements root clock gating by utilizing the DPP DTO registers
with a special case of DTO enabled, phase = 0, modulo = 1. This
conflicts with our policy to always update the DPPDTO for cases where
it's expected to be disabled.

The pipes unexpectedly enter a higher power state than expected because
of this programming flow.

[How]
Guard the upper layers of HWSS against this hardware quirk with
programming the register with an internal state flag in DCCG.

While technically acting as global state for the DCCG, HWSS shouldn't be
expected to understand the hardware quirk for having DTO disabled
causing more power than DTO enabled with this specific setting.

This also prevents sequencing errors from occuring in the future if
we have to program DPP DTO in multiple locations.

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'amd-drm-next-6.5-2023-06-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.5-2023-06-02:

amdgpu:
- SR-IOV fixes
- Warning fixes
- Misc code cleanups and spelling fixes
- DCN 3.2 updates
- Improved DC FAMS support for better power management
- Improved DC SubVP support for better power management
- DCN 3.1.x fixes
- Max IB size query
- DC GPU reset fixes
- RAS updates
- DCN 3.0.x fixes
- S/G display fixes
- CP shadow buffer support
- Implement connector force callback
- Z8 power improvements
- PSP 13.0.10 vbflash support
- Mode2 reset fixes
- Store MQDs in VRAM to improve queue switch latency
- VCN 3.x fixes
- JPEG 3.x fixes
- Enable DC_FP on LoongArch
- GFXOFF fixes
- GC 9.4.3 partition support
- SDMA 4.4.2 partition support
- VCN/JPEG 4.0.3 partition support
- VCN 4.0.3 updates
- NBIO 7.9 updates
- GC 9.4.3 updates
- Take NUMA into account when allocating memory
- Handle NUMA for partitions
- SMU 13.0.6 updates
- GC 9.4.3 RAS updates
- Stop including unused swiotlb.h
- SMU 13.0.7 fixes
- Fix clock output ordering on some APUs
- Clean up DC FPGA code
- GFX9 preemption fixes
- Misc irq fixes
- S0ix fixes
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- PCIe fix for RDNA2
- kdoc fixes
- Documentation updates

amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions

radeon:
- Fix possible double free
- Stop including unused swiotlb.h
- Fix possible division by zero

ttm:
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()

UAPI:
- Add new ctx query flag to better handle GPU resets
  Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290
- Add new interface to query and set shadow buffer for RDNA3
  Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986
- Add new INFO query for max IB size
  Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3

amd-drm-next-6.5-2023-06-09:

amdgpu:
- S0ix fixes
- Initial SMU13 Overdrive support
- kdoc fixes
- Misc clode cleanups
- Flexible array fixes
- Display OTG fixes
- SMU 13.0.6 updates
- Revert some broken clock counter updates
- Misc display fixes
- GFX9 preemption fixes
- Add support for newer EEPROM bad page table format
- Add missing radeon secondary id
- Add support for new colorspace KMS API
- CSA fix
- Stable pstate fixes for APUs
- make vbl interface admin only
- Handle PCI accelerator class

amdkfd:
- Add debugger support for gdb

radeon:
- Fix possible UAF

drm:
- Add Colorspace functionality

UAPI:
- Add debugger interface for enabling gdb
  Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi
- Add KMS colorspace API
  Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com

drm/amd/display: Filter out AC mode frequencies on DC mode systems

Why:
Limit maximum clock speeds to DC mode limits for DC mode systems
How:
Store DC mode limits when individual clocks are initialized and
cap the values when building the clock table

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DSC Programming Deltas

[Why]
Programming register delta for DSC sub-block

[How]
Change DSC, resource files for programming register delta.

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Sridevi <sarvinde@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: cache trace buffer size"

Revert commit 257e9891db0b ("drm/amd/display: cache trace buffer size")
to fix regression found in tests.

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: workaround for compute workload type on some skus

On smu 13.0.0, the compute workload type cannot be set on all the skus
due to some other problems. This workaround is to make sure compute workload type
can also run on some specific skus.

v2: keep the variable consistent

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add NULL pointer check

[why]
check dmub_Srv exist or not before accessing dmub.

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable more Pstates profile levels for yellow_carp

This patch enables following UMD stable Pstates profile levels for
power_dpm_force_performance_level interface.

- profile_peak
- profile_min_mclk
- profile_min_sclk
- profile_standard

Signed-off-by: shikaguo <shikai.guo@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add option params to enforce process isolation between graphics and compute

enforce process isolation between graphics and compute via using the same reserved vmid.

v2: remove params "struct amdgpu_vm *vm" from
    amdgpu_vmid_alloc_reserved and amdgpu_vmid_free_reserved.

Signed-off-by: Chong Li <chongli2@amd.com>
Reviewed-by: Christian Koenig <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Wrap -Wunused-but-set-variable in cc-option

-Wunused-but-set-variable was only supported in clang starting with
13.0.0, so earlier versions will emit a warning, which is turned into a
hard error for the kernel to mirror GCC:

  error: unknown warning option '-Wunused-but-set-variable'; did you mean '-Wunused-const-variable'? [-Werror,-Wunknown-warning-option]

The minimum supported version of clang for building the kernel is
11.0.0, so match the rest of the kernel and wrap
-Wunused-but-set-variable in a cc-option call, so that it is only used
when supported by the compiler.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1869
Fixes: 1b320ad3f5a8 ("drm/amd/amdgpu: introduce DRM_AMDGPU_WERROR")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add the accelerator PCIe class

Add the accelerator PCIe class and match the
class in amdgpu for 0x1002 devices of that class.

From PCI spec:
"PCI Code and ID Assignment, r1.9, sec 1, 1.19"

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "Revert drm/amd/display: Enable Freesync Video Mode by default"

This reverts commit 4243c84aa082d8fba70c45f48eb2bb5c19799060.

Enables freesync video by default, since the hang and corruption issue
on eDP panels are now fixed.

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <rjordrigo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix and enable debugging for gfx11

There are a couple of fixes required to enable gfx11 debugging.

First, ADD_QUEUE.trap_en is an inappropriate place to toggle
a per-process register so move it to SET_SHADER_DEBUGGER.trap_en.
When ADD_QUEUE.skip_process_ctx_clear is set, MES will prioritize
the SET_SHADER_DEBUGGER.trap_en setting.

Second, to preserve correct save/restore priviledged wave states
in coordination with the trap enablement setting, resume suspended
waves early in the disable call.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Tighten permissions on VBIOS flashing attributes

Non-root users shouldn't be able to try to trigger a VBIOS flash
or query the flashing status.  This should be reserved for users with the
appropriate permissions.

Cc: stable@vger.kernel.org
Fixes: 8424f2ccb3c0 ("drm/amdgpu/psp: Add vbflash sysfs interface support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Make sure image is written to trigger VBIOS image update flow

The VBIOS image update flow requires userspace to:
1) Write the image to `psp_vbflash`
2) Read `psp_vbflash`
3) Poll `psp_vbflash_status` to check for completion

If userspace reads `psp_vbflash` before writing an image, it's
possible that it causes problems that can put the dGPU into an invalid
state.

Explicitly check that an image has been written before letting a read
succeed.

Cc: stable@vger.kernel.org
Fixes: 8424f2ccb3c0 ("drm/amdgpu/psp: Add vbflash sysfs interface support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable more Pstates profile levels for SMU v13.0.4

This patch enables following UMD stable Pstates profile
levels for power_dpm_force_performance_level interface.

- profile_peak
- profile_min_mclk
- profile_min_sclk
- profile_standard

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable vclk and dclk Pstates for SMU v13.0.4

Add the ability to control the vclk and dclk frequency by
power_dpm_force_performance_level interface.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix vclk setting failed for SMU v13.0.4

PMFW use the left-shifted 16 bits argument to set the VCLK
DPM frequency for SMU v13.0.4.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip to resume rlcg for gc 9.4.3 in vf side

skip to resume rlcg, because rlcg is already enabled in pf side.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable virtual display support on APP device

virtual display is not support on APP device.

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Gavin Wan <gavin.wan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: unmap and remove csa_va properly

Root PD BO should be reserved before unmap and remove
a bo_va from VM otherwise lockdep will complain.

v2: check fpriv->csa_va is not NULL instead of amdgpu_mcbp (christian)

[14616.936827] WARNING: CPU: 6 PID: 1711 at drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1762 amdgpu_vm_bo_del+0x399/0x3f0 [amdgpu]
[14616.937096] Call Trace:
[14616.937097]  <TASK>
[14616.937102]  amdgpu_driver_postclose_kms+0x249/0x2f0 [amdgpu]
[14616.937187]  drm_file_free+0x1d6/0x300 [drm]
[14616.937207]  drm_close_helper.isra.0+0x62/0x70 [drm]
[14616.937220]  drm_release+0x5e/0x100 [drm]
[14616.937234]  __fput+0x9f/0x280
[14616.937239]  ____fput+0xe/0x20
[14616.937241]  task_work_run+0x61/0x90
[14616.937246]  exit_to_user_mode_prepare+0x215/0x220
[14616.937251]  syscall_exit_to_user_mode+0x2a/0x60
[14616.937254]  do_syscall_64+0x48/0x90
[14616.937257]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor avi_info_frame colorimetry determination

Replace the messy two if-else chains here that were
on the same value with a switch on the enum.

Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debugfs for testing output colorspace

In order to IGT test colorspace we'll want to print
the currently enabled colorspace on a stream. We add
a new debugfs to do so, using the same scheme as
current bpc reporting.

This might also come in handy when debugging display
issues.

v4:
- Fix function doc comment
- Fix sRGB debug print

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Always set crtcinfo from create_stream_for_sink

Given that we always pass dm_state into here now, this won't ever
trigger anymore.

This is needed for we will always fail mode validation with invalid
clocks or link bandwidth errors.

Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Send correct DP colorspace infopacket

Look at connector->colorimetry to determine output colorspace.

We don't want to impact current SDR behavior, so
DRM_MODE_COLORIMETRY_DEFAULT preserves current behavior.

Also add support to explicitly set BT601 and BT709.

v4:
- Roll support for BT709 and BT601 into this patch
- Add default case to avoid warnings for unhandled
  enum values

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Signal mode_changed if colorspace changed

We need to signal mode_changed to make sure we update the output
colorspace.

v2: No need to call drm_hdmi_avi_infoframe_colorimetry as DC does its
    own infoframe packing.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Register Colorspace property for DP and HDMI

We want compositors to be able to set the output
colorspace on DP and HDMI outputs, based on the
caps reported from the receiver via EDID.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Always pass connector_state to stream validation

We need the connector_state for colorspace and scaling information
and can get it from connector->state.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/connector: Allow drivers to pass list of supported colorspaces

Drivers might not support all colorspaces defined in
dp_colorspaces and hdmi_colorspaces. This results in
undefined behavior when userspace is setting an
unsupported colorspace.

Allow drivers to pass the list of supported colorspaces
when creating the colorspace property.

v2:
 - Use 0 to indicate support for all colorspaces (Jani)
 - Print drm_dbg_kms message when drivers pass 0
   to signal that drivers should specify supported
   colorspaecs explicity (Jani)

v3:
 - Move changes to create a common colorspace_names array
   to separate patch

v6:
- Avoid magic when passing 0 for supported_colorspaces;
  be explicit in treating it as "all DP/HDMI"

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/connector: Print connector colorspace in state debugfs

v3: Fix kerneldocs (kernel test robot)

v4: Avoid returning NULL from drm_get_colorspace_name

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/connector: Use common colorspace_names array

We an use bitfields to track the support ones for HDMI
and DP. This allows us to print colorspaces in a consistent
manner without needing to know whether we're dealing with
DP or HDMI.

v4:
- Rename _MAX to _COUNT and leave comment to indicate
  it's not a valid value
- Fix misplaced function doc

v6:
- Drop magic in drm_mode_create_colorspace_property for
  dealing with "0" supported_colorspaces. Expect the caller
  to always provide a non-zero supported_colorspaces.
- Improve error checking and logging

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/connector: Pull out common create_colorspace_property code

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/connector: Add enum documentation to drm_colorspace

To match the other enums, and add more information about these values.

v2:
 - Specify where an enum entry comes from
 - Clarify DEFAULT and NO_DATA behavior
 - BT.2020 CYCC is "constant luminance"
 - correct type for BT.601

v4:
- drop DP/HDMI clarifications that might create
  more questions than answers

v5:
- Add note on YCC and RGB variants

Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/connector: Convert DRM_MODE_COLORIMETRY to enum

This allows us to use strongly typed arguments.

v2:
 - Bring NO_DATA back
 - Provide explicit enum values

v3:
- Drop unnecessary '&' from kerneldoc (emersion)

v4:
- Fix Normal Colorimetry comment

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Simon Ser <contact@emersion.fr>
Cc: Melissa Wen <mwen@igalia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix reserved SDMA queues handling

This patch fixes a regression caused by a bad merge where
the handling of reserved SDMA queues was accidentally removed.
With the fix, the reserved SDMA queues are again correctly
marked as unavailable for allocation.

Fixes: a805889a1531 ("drm/amdkfd: Update SDMA queue management for GFX9.4.3")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add missing radeon secondary PCI ID

0x5b70 is a missing RV370 secondary id.  Add it so
we don't try and probe it with amdgpu.

Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Check that a system is a NUMA system before looking for SRAT

It's pointless on laptops to look for the SRAT table as these are not
NUMA.  Check the number of possible nodes is > 1 to decide whether to
look for SRAT.

Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix vmfault signalling with additional data.

Exception handling for vmfaults should be raised with additional data.

Reported-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set EEPROM ras info

Set EEPROM ras info: rma status, health percent and bad
page threshold.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Calculate EEPROM table ras info bytes sum

It's more reasonable to check EEPROM table ras info bytes.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add support EEPROM table v2.1

Add ras info to EEPROM table, app can analyse device ECC
status without GPU driver through EEPROM table ras info.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Support setting EEPROM table version

Add setting EEPROM table version interface for umcv8.10,
Add EEPROM table v2.1 to UMC v8.10.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add RAS table v2.1 macro definition

Add RAS EEPROM table version 2.1 macro definition.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Rename ras table version

Rename RAS_TABLE_VER to RAS_TABLE_VER_V1,
move RAS_TABLE_VER_V1 from amdgpu_ras_eeprom.c to amdgpu_ras_eeprom.h.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Implement gfx9 patch functions for resubmission

Patch the packages including CONTEXT_CONTROL and WRITE_DATA for gfx9
during the resubmission scenario.

Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Modify indirect buffer packages for resubmission

When the preempted IB frame resubmitted to cp, we need to modify the frame
data including:
1. set PRE_RESUME 1 in CONTEXT_CONTROL.
2. use meta data(DE and CE) read from CSA in WRITE_DATA.

Add functions to save the location the first time IBs emitted and callback
to patch the package when resubmission happens.

Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mmsch: Correct the definition for mmsch init header

For the header, it is version related, shouldn't use MAX_VCN_INSTANCES.

Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: potential error pointer dereference in ioctl

The "target" either comes from kfd_create_process() which returns error
pointers on error or kfd_lookup_process_by_pid() which returns NULL on
error.  So we need to check for both types of errors.

Fixes: 0ab2d7532b05 ("drm/amdkfd: prepare per-process debug enable and disable")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only use ODM2:1 policy for high pixel rate displays

We only gain a benefit of using the ODM2:1 dynamic policy if it allow us
to decrease DISPCLK to use the VMIN freq.  If the display config can
already achieve VMIN DISPCLK freq without ODM2:1, don't apply the
policy.

This patch was reverted but that causes some IGT regressions. To
unblock, the patch is being applied again until IGT failures are
fixed.

Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

drm/amd/pm: Fix memory some memory corruption

The "od_table" is a pointer to a large struct, but this code is doing
pointer math as if it were pointing to bytes.  It results in writing
far outside the struct.

Fixes: 2e8452ea4ef6 ("drm/amd/pm: fulfill the OD support for SMU13.0.0")
Fixes: 2a9aa52e4617 ("drm/amd/pm: fulfill the OD support for SMU13.0.7")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: display/Kconfig: replace leading spaces with tab

This patch replace the leading spaces with tab, make them keep aligned with
the rest of the config options. No functional change.

Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: mark dml314's UseMinimumDCFCLK() as noinline_for_stack

clang reports:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:3892:6: error: stack frame size (2632) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
 3892 | void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
      |      ^
1 error generated.

So, since UseMinimumDCFCLK() consumes a lot of stack space, mark it as
noinline_for_stack to prevent it from blowing up
dml314_ModeSupportAndSystemConfigurationFull()'s stack size.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: mark dml31's UseMinimumDCFCLK() as noinline_for_stack

clang reports:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3797:6: error: stack frame size (2632) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
 3797 | void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
      |      ^
1 error generated.

So, since UseMinimumDCFCLK() consumes a lot of stack space, mark it as
noinline_for_stack to prevent it from blowing up
dml31_ModeSupportAndSystemConfigurationFull()'s stack size.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix unused variable ‘should_lock_all_pipes’

Fix below compilation error:

drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3524:7: error: unused variable 'should_lock_all_pipes' [-Werror,-Wunused-variable]
        bool should_lock_all_pipes = (update_type != UPDATE_TYPE_FAST);

Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce sdp bw after urgent to 90%

[Description]
Reduce expected SDP bandwidth due to poor QoS and
arbitration issues on high bandwidth configs

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add control flag to dc_stream_state to skip eDP BL off/link off

Add control flag to dc_stream_state to skip eDP BL off/link off.

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Max Tseng <max.tseng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Wrong index type for pipe iterator

[Why and How]
Type mismatch in index and pipe count might cause an infinite loop. code
Change should resolve this issue.

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor fast update to use new HWSS build sequence

[Description]
- Refactor HW sequencer to use a build / execute sequence
- Also move gamma updates to become fast

v2: squash in build fix ("drm/amd/display: Fix guarding of 'if (dc->debug.visual_confirm)'")

Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dcn315 single stream crb allocation

Change to improve avoiding asymetric crb calculations for single stream
scenarios.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change reserved vram info print

The link object of mgr->reserved_pages is the blocks
variable in struct amdgpu_vram_reservation, not the
link variable in struct drm_buddy_block.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: fix xclk freq on CHIP_STONEY

According to Alex, most APUs from that time seem to have the same issue
(vbios says 48Mhz, actual is 100Mhz).  I only have a CHIP_STONEY so I
limit the fixup to CHIP_STONEY

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl

Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: switch to golden tsc registers for raven/raven2"

This reverts commit f03eb1d26c2739b75580f58bbab4ab2d5d3eba46.

This results in inconsistent timing reported via asynchronous
GPU queries.

Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id"

This reverts commit 9d2d1827af295fd6971786672c41c4dba3657154.

This results in inconsistent timing reported via asynchronous
GPU queries.

Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: change the reference clock for raven/raven2"

This reverts commit fbc24293ca16b3b9ef891fe32ccd04735a6f8dc1.

This results in inconsistent timing reported via asynchronous
GPU queries.

Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html
Cc: Jesse.Zhang@amd.com
Cc: michel@daenzer.net
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: convert vcn/jpeg logical mask to physical mask

 Changed from V1:
  Remove amdgpu_ras_logical_mask_to_physical_mask
due to GET_MASK provides same feature.
Support convert VCN/JPEG logical mask to physical
mask.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support check vcn jpeg block mask

Support VCN/JPEG instance mask checking, pass logical
mask directly except GFX/SDMA/VCN/JPEG blocks.

Changed from V1:
correct a typo

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: pass xcc mask to ras ta

pass xcc mask to ras ta, ras ta will compare
the mask with the one from chiplet topology.

Changed from V1:
Remove IP version checking.
Set ras_cmd->ras_init_message.init_flags.xcc_mask
directly due to xcc_mask is common structres to
all the devices.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update smu-driver if header for smu 13.0.0 and smu 13.0.10

update smu-driver if header for smu 13.0.0 and smu 13.0.10

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: notify driver unloading to PMFW for SMU v13.0.6 dGPU

Per requested, follow the same sequence as APU to send only
PPSMC_MSG_PrepareForDriverUnload to PMFW during driver unloading.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Mark 'kgd_gfx_aldebaran_clear_address_watch' & 'kgd_gfx_v11_clear_address_watch' functions as static

Below two functions cause a warning because they lack a prototype:

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_aldebaran.c:164:10: warning: no previous prototype for ‘kgd_gfx_aldebaran_clear_address_watch’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v11.c:782:10: warning: no previous prototype for ‘kgd_gfx_v11_clear_address_watch’ [-Wmissing-prototypes]

There are no callers from other files, so just mark them as 'static'.

Also fixes the following checks:

CHECK: Alignment should match open parenthesis +static uint32_t
kgd_gfx_aldebaran_clear_address_watch(struct amdgpu_device *adev,
uint32_t watch_id)

CHECK: Alignment should match open parenthesis +static uint32_t
kgd_gfx_v11_clear_address_watch(struct amdgpu_device *adev, uint32_t
watch_id)

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Program OTG vtotal min/max selectors unconditionally for DCN1+

For FPO/FAMS, DMCUB will try to change the output timings by writing to
the OTG registers. However, the timings written directly to the OTG
registers will not be honoured unless VMIN/VMAX selector registers are
programmed with the right bits and trigger source is selected correctly.
Proper solution needs to go into DMCUB but will require additional state
tracking to ensure that the selectors are set and reset correctly as per
driver state. Until fix is merged into firmware, apply the workaround in
driver to unconditionally write OTG vmin/vmax selectors.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Only use ODM2:1 policy for high pixel rate displays"

This reverts commit 047783cdd5f604d87398236beb4971abb4d43293 since it
causes higher power consumption for single display use case (4k60).

Also, this patch introduced a 35% performance drop in a Vulkan benchmark.

* The patch disabled the ODM-combination on most popular monitors, including 4K, 2K and FHD monitors at 60Hz.

* ODM-combination can halve the DPP clock to save power, that is the reason why we introduce ODM-combination, and the PM log shows single pipe consumes more power at 4K@60Hz.

* ODM-combination has 2 de-tiled buffer involved, which provides longer self-sustained time, that benefit to the memory power optimization.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>