Bernhard Beschow [Sat, 11 Jan 2025 18:37:01 +0000 (19:37 +0100)]
hw/char/imx_serial: Update all state before restarting ageing timer
Fixes characters to be "echoed" after each keystroke rather than after every
other since imx_serial_rx_fifo_ageing_timer_restart() would see ~UTS1_RXEMPTY
only after every other keystroke.
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bernhard Beschow [Sat, 11 Jan 2025 18:37:00 +0000 (19:37 +0100)]
hw/char/imx_serial: Fix reset value of UFCR register
The value of the UCFR register is respected when echoing characters to the
terminal, but its reset value is reserved. Fix the reset value to the one
documented in the datasheet.
While at it move the related attribute out of the section of unimplemented
registers since its value is actually respected.
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/v7m: Remove use of &first_cpu in machine_init()
When instanciating the machine model, the machine_init()
implementations usually create the CPUs, so have access
to its first CPU. Use that rather then the &first_cpu
global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Samuel Tardieu <sam@rfc1149.net>
Message-id: 20250112225614.33723-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the TYPE_ARMV7M object forward its NVIC interrupt lines,
it is somehow misleading to name it 'nvic'. Add the 'armv7m'
local variable for clarity, but also keep the 'nvic' variable
behaving like before when used for wiring IRQ lines.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20250112225614.33723-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARMv7MState object is not simply a CPU, it also
contains the NVIC, SysTick timer, and various MemoryRegions.
Rename the field as 'armv7m', like other Cortex-M boards.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20250112225614.33723-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Hajnoczi [Fri, 24 Jan 2025 15:02:01 +0000 (10:02 -0500)]
Merge tag 'pull-loongarch-20250124' of https://gitlab.com/bibo-mao/qemu into staging
loongarch queue
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQQNhkKjomWfgLCz0aQfewwSUazn0QUCZ5M4AwAKCRAfewwSUazn
# 0aJAAP45/9qfbGSYiMCrBXpRFlyvtRN+GEXHEsERfk9Q1V+tQgEA/mMiUEcyc/xc
# Z1Z27cDoqUFRhPmxbd6/KyTGHzo2+As=
# =Zanw
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 24 Jan 2025 01:49:39 EST
# gpg: using EDDSA key 0D8642A3A2659F80B0B3D1A41F7B0C1251ACE7D1
# gpg: Good signature from "bibo mao <maobibo@loongson.cn>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7044 3A00 19C0 E97A 31C7 13C4 8E86 8FB7 A176 9D4C
# Subkey fingerprint: 0D86 42A3 A265 9F80 B0B3 D1A4 1F7B 0C12 51AC E7D1
* tag 'pull-loongarch-20250124' of https://gitlab.com/bibo-mao/qemu:
target/loongarch: Dump all generic CSR registers
target/loongarch: Set unused flag with CSR registers
target/loongarch: Add common source file for CSR register
target/loongarch: Add common header file for CSR registers
target/loongarch: Add generic csr function type
target/loongarch: Remove static CSR function setting
target/loongarch: Add dynamic function access with CSR register
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixes various warnings in the testsuite while building gupnp:
gssdp-net-DEBUG: Failed to send netlink message: Operation not supported
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: 127.0.0.1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Mismatch between host header and host IP (192.168.1.2, expected: 127.0.0.1)
gupnp-context-DEBUG: Mismatch between host header and host IP (fe80::01, expected: 127.0.0.1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Failed to parse HOST header from request: Invalid IPv6 address ?[fe80::01%1]? in URI
gupnp-context-DEBUG: Failed to parse HOST header from request: Invalid IPv6 address ?[fe80::01%eth0]? in URI
gupnp-context-DEBUG: Failed to parse HOST header from request: Could not parse port ?:1? in URI
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: ::1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: ::1)
gupnp-context-DEBUG: Mismatch between host header and host port (80, expected 4711)
gupnp-context-DEBUG: Mismatch between host header and host IP (example.com, expected: ::1)
Helge Deller [Sun, 19 Jan 2025 04:26:10 +0000 (05:26 +0100)]
linux-user: netlink: Add emulation of IP_MULTICAST_IF
Add IP_MULTICAST_IF and share the code with IP_ADD_MEMBERSHIP / IP_DROP_MEMBERSHIP.
Sharing the code makes sense, because the manpage of ip(7) says:
IP_MULTICAST_IF (since Linux 1.2)
Set the local device for a multicast socket. The argument
for setsockopt(2) is an ip_mreqn or (since Linux 3.5)
ip_mreq structure similar to IP_ADD_MEMBERSHIP, or an
in_addr structure. (The kernel determines which structure
is being passed based on the size passed in optlen.) For
getsockopt(2), the argument is an in_addr structure.
Helge Deller [Mon, 20 Jan 2025 21:20:41 +0000 (22:20 +0100)]
linux-user: netlink: Add missing IFA_PROTO to host_to_target_data_addr_rtattr()
Fix this warning:
Unknown host IFA type: 11
While adding IFA_PROTO, convert all IFA_XXX values over to QEMU_IFA_XXX values
to avoid a build failure on Ubuntu 22.04 (kernel v5.18 which does not know
IFA_PROTO yet).
Bibo Mao [Thu, 16 Jan 2025 11:09:25 +0000 (19:09 +0800)]
target/loongarch: Set unused flag with CSR registers
On LA464, some CSR registers are not used such as CSR_SAVE8 -
CSR_SAVE15, also CSR registers relative with MCE is not used now.
Flag CSRFL_UNUSED is added for these registers, so that it will
not dumped. In order to keep compatiblity, these CSR registers are
not removed since it is used in vmstate already.
Bibo Mao [Thu, 16 Jan 2025 06:22:19 +0000 (14:22 +0800)]
target/loongarch: Add common source file for CSR register
Common source file csr.c is added here, it can be used by both
TCG mode and kvm mode. The common code is removed from file
tcg/insn_trans/trans_privileged.c.inc to csrc.c
Bibo Mao [Wed, 22 Jan 2025 07:13:41 +0000 (15:13 +0800)]
target/loongarch: Add generic csr function type
Parameter type TCGv and TCGv_ptr for function GenCSRRead and GenCSRWrite
is not used in non-TCG mode. Generic csr function type is added here
with parameter void type, so that it passes to compile with non-TCG mode.
Stefan Hajnoczi [Wed, 22 Jan 2025 14:59:02 +0000 (09:59 -0500)]
Merge tag 'pull-request-2025-01-21v2' of https://gitlab.com/thuth/qemu into staging
* Fix bugs related to the new "boot order" feature in the s390-ccw bios
* Fix crash that occurs when introspecting older s390-virtio-ccw machines
* Fix error in pbkdf code on fast machines (e.g. s390x with crypto adapter)
* Convert kvm_xen_guest avocado test to the functional framework
* tag 'pull-request-2025-01-21v2' of https://gitlab.com/thuth/qemu:
pc-bios: Update the s390 bios images with the recent changes
pc-bios/s390-ccw: Abort IPL on invalid loadparm
pc-bios/s390-ccw/netmain: Fix error messages with regards to the TFTP server
pc-bios/s390-ccw: Fix boot problem with virtio-net devices
pc-bios/s390-ccw/virtio: Add a function to reset a virtio device
hw/s390x: Fix crash that occurs when inspecting older versioned machines types
crypto: fix bogus error benchmarking pbkdf on fast machines
MAINTAINERS: Remove myself as Avocado Framework reviewer
tests/functional: Convert the kvm_xen_guest avocado test
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Jared Rossi [Fri, 17 Jan 2025 21:22:35 +0000 (16:22 -0500)]
pc-bios/s390-ccw: Abort IPL on invalid loadparm
Because the loadparm specifies an exact kernel the user wants to boot, if the
loadparm is invalid it must represent a misconfiguration of the guest. Thus we
should abort the IPL immediately, without attempting to use other devices, to
avoid booting into an unintended guest image.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20250117212235.1324063-2-jrossi@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Thu, 16 Jan 2025 11:58:26 +0000 (12:58 +0100)]
pc-bios/s390-ccw/netmain: Fix error messages with regards to the TFTP server
The code in net_init_ip() currently bails out early if "rc" is less
than 0, so the if-statements that check for negative "rc" codes to
print out some specific error messages with regards to the TFTP server
are never reached. Move them earlier to bring that dead code back to
life.
Reviewed-by: Jared Rossi <jrossi@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Tested-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20250116115826.192047-4-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Thu, 16 Jan 2025 11:58:25 +0000 (12:58 +0100)]
pc-bios/s390-ccw: Fix boot problem with virtio-net devices
When we are trying to boot from virtio-net devices, the
s390-ccw bios currently leaves the virtio-net device enabled
after using it. That means that the receiving virt queues will
continue to happily write incoming network packets into memory.
This can corrupt data of the following boot process. For example,
if you set up a second guest on a virtual network and create a
lot of broadcast traffic there, e.g. with:
ping -i 0.02 -s 1400 -b 192.168.1.255
and then you try to boot a guest with two boot devices, a network
device first (which should not be bootable) and e.g. a bootable SCSI
CD second, then this guest will fail to load the kernel from the CD
image:
Network boot device detected
Network boot starting...
Using MAC address: 52:54:00:12:34:56
Requesting information via DHCP: done
Using IPv4 address: 192.168.1.76
Using TFTP server: 192.168.1.1
Trying pxelinux.cfg files...
TFTP error: ICMP ERROR "port unreachable"
Receiving data: 0 KBytes
Repeating TFTP read request...
TFTP error: ICMP ERROR "port unreachable"
Failed to load OS from network.
Failed to IPL from this network!
LOADPARM=[ ]
Using virtio-scsi.
! virtio-scsi:setup:inquiry: response VS RESP=ff !
ERROR: No suitable device for IPL. Halting...
We really have to shut up the virtio-net devices after we're not
using it anymore. The easiest way to do this is to simply reset
the device, so let's do that now.
Reviewed-by: Jared Rossi <jrossi@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Tested-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20250116115826.192047-3-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Thomas Huth [Thu, 16 Jan 2025 11:58:24 +0000 (12:58 +0100)]
pc-bios/s390-ccw/virtio: Add a function to reset a virtio device
To be able to properly silence a virtio device after using it,
we need a global function to reset the device.
Reviewed-by: Jared Rossi <jrossi@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Tested-by: Jared Rossi <jrossi@linux.ibm.com>
Message-ID: <20250116115826.192047-2-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
The problem is that the versioned s390-ccw-virtio machine types
use instance_init() to set global state that should be initialized
before the CPUs get instantiated. But instance_init() is not called
only for the machine that is finally used, it is also called for
temporary instances of objects that are e.g. just created for
introspection. That means that those instance_init() functions can
also be called while a machine (and its CPUs) is already created,
which triggers the assertion in cpu_models.c.
So we must not use instance_init() for setting global state, but
use the machine->init() function instead, which is really only called
once when the machine comes to life.
Fixes: 3b00f702c2 ("s390x/cpumodel: add zpci, aen and ais facilities")
Message-ID: <20250120085059.239345-1-thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
crypto: run qcrypto_pbkdf2_count_iters in a new thread
Unfortunately this has a subtle bug on machines which are very fast.
On the first time around the loop, the 'iterations' value is quite
small (1 << 15), and so will run quite fast. Testing has shown that
some machines can complete this benchmarking task in as little as
7 milliseconds.
Unfortunately the 'getrusage' data is not updated at the time of
the 'getrusage' call, it is done asynchronously by the scheduler.
The 7 millisecond completion time for the benchmark is short
enough that 'getrusage' sometimes reports 0 accumulated execution
time.
As a result the 'delay_ms == 0' sanity check in the above commit
is triggering non-deterministically on such machines.
The benchmarking loop intended to run multiple times, increasing
the 'iterations' value until the benchmark ran for > 500 ms, but
the sanity check doesn't allow this to happen.
To fix it, we keep a loop counter and only run the sanity check
after we've been around the loop more than 5 times. At that point
the 'iterations' value is high enough that even with infrequent
updates of 'getrusage' accounting data on fast machines, we should
see a non-zero value.
Fixes: https://lore.kernel.org/qemu-devel/ffe542bb-310c-4616-b0ca-13182f849fd1@redhat.com/ Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2336437 Reported-by: Thomas Huth <thuth@redhat.com> Reported-by: Richard W.M. Jones <rjones@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20250109093746.1216300-1-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
MAINTAINERS: Remove myself as Avocado Framework reviewer
While I was very enthusiastic when Avocado was presented to
the QEMU community and pushed forward to have it integrated,
time passed and I lost interest. Be honest, remove my R: tag
to not give fake expectation I'd review patches related to
Avocado anymore.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250106055024.70139-1-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Stefan Hajnoczi [Tue, 21 Jan 2025 13:27:20 +0000 (08:27 -0500)]
Merge tag 'pull-tcg-20250117' of https://gitlab.com/rth7680/qemu into staging
tcg:
- Add TCGOP_TYPE, TCGOP_FLAGS.
- Pass type and flags to tcg_op_supported, tcg_target_op_def.
- Split out tcg-target-has.h and unexport from tcg.h.
- Reorg constraint processing; constify TCGOpDef.
- Make extract, sextract, deposit opcodes mandatory.
- Merge ext{8,16,32}{s,u} opcodes into {s}extract.
tcg/mips: Expand bswap unconditionally
tcg/riscv: Use SRAIW, SRLIW for {s}extract_i64
tcg/riscv: Use BEXTI for single-bit extractions
tcg/sparc64: Use SRA, SRL for {s}extract_i64
disas/riscv: Guard dec->cfg dereference for host disassemble
util/cpuinfo-riscv: Detect Zbs
accel/tcg: Call tcg_tb_insert() for one-insn TBs
linux-user: Add missing /proc/cpuinfo fields for sparc
* tag 'pull-tcg-20250117' of https://gitlab.com/rth7680/qemu: (68 commits)
softfloat: Constify helpers returning float_status field
accel/tcg: Call tcg_tb_insert() for one-insn TBs
tcg: Document tb_lookup() and tcg_tb_lookup()
linux-user: Add missing /proc/cpuinfo fields for sparc
tcg/riscv: Use BEXTI for single-bit extractions
util/cpuinfo-riscv: Detect Zbs
tcg: Remove TCG_TARGET_HAS_deposit_{i32,i64}
tcg: Remove TCG_TARGET_HAS_{s}extract_{i32,i64}
tcg/tci: Remove assertions for deposit and extract
tcg/tci: Provide TCG_TARGET_{s}extract_valid
tcg/sparc64: Use SRA, SRL for {s}extract_i64
tcg/s390x: Fold the ext{8,16,32}[us] cases into {s}extract
tcg/riscv: Use SRAIW, SRLIW for {s}extract_i64
tcg/riscv64: Fold the ext{8,16,32}[us] cases into {s}extract
tcg/ppc: Fold the ext{8,16,32}[us] cases into {s}extract
tcg/mips: Fold the ext{8,16,32}[us] cases into {s}extract
tcg/loongarch64: Fold the ext{8,16,32}[us] cases into {s}extract
tcg/arm: Add full [US]XT[BH] into {s}extract
tcg/aarch64: Expand extract with offset 0 with andi
tcg/aarch64: Provide TCG_TARGET_{s}extract_valid
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Sun, 19 Jan 2025 13:55:46 +0000 (08:55 -0500)]
Merge tag 'pull-riscv-to-apply-20250119-1' of https://github.com/alistair23/qemu into staging
Second RISC-V PR for 10.0
* Reduce the overhead for simple RISC-V vector unit-stride loads and stores
* Add V bit to GDB priv reg
* Add 'sha' support
* Add traces for exceptions in user mode
* Update Pointer Masking to Zjpm v1.0
* Add Smrnmi support
* Fix timebase-frequency when using KVM acceleration
* Add RISC-V Counter delegation ISA extension support
* Add support for Smdbltrp and Ssdbltrp extensions
* Introduce a translation tag for the IOMMU page table cache
* Support Supm and Sspm as part of Zjpm v1.0
* Convert htif debug prints to trace event
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmeMUUwACgkQr3yVEwxT
# gBNgDQ/+JeqcsbJRX+PZQJEV06tDIJpk+mfaBHUYSGdNkjI9fzowNaxFIEB2vaLt
# 4+xAGMnJ4vMcjJyBcPOn1FKAlowM7MsUNITOF9Rstnyriqnj2UsUZ9YBtkuG6gWH
# ZHoYEKu7mAZoZw5RRx4TatHDXw7TYfUsrDPrn+x6yeCZTq9ruRTlHkzp2LC725Vq
# KTnbWAP7WlqiJaSxB5eIFYT5tYP1Blp0yD358B037C57EU9j5zm2FQdFmVK1+xRF
# dFg/urBIzfAjjkCS/t9DmH+S6NgMEut6udUhllk/KUJAzWvsggc4wZZlWjFOJFJY
# fIxx3alhY3pcm1PYjFpf15Poz6Pqva/KGjwgZafirKQtPbRSzfRkUwcHOYRTQT9j
# abeiB44XPaeIl8Jvw7GLxcWtlJ5NmBrZho+2Z9mIhB/Ix5H3PDgs18Oc/s73P2qQ
# JFLRb7cpYy1HbRc0ugvwAmOTY1t6HX8HAtT+3rNhiXpXnj4RW2C/WU1cEqrg8QkM
# cTPiy2zHoBhAWt9aDK1Kvbhb1vur3JaF7rk9jeKlriFr87Ly+yPU+8mnEDw40NMR
# Tc9nivqmOqqXS5AM9O/W1uzTWzpxIUy7XBy3cuSk0uZCoge4IE2Or7P2Rb2uyaNZ
# RkAo/PL2N1cMjP7gB3kLRtYY7FA+nal66KhfbHPRHqj+ZwUAxzs=
# =F3IG
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 18 Jan 2025 20:11:40 EST
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20250119-1' of https://github.com/alistair23/qemu: (50 commits)
hw/char/riscv_htif: Convert HTIF_DEBUG() to trace events
target/riscv: Support Supm and Sspm as part of Zjpm v1.0
hw/riscv/riscv-iommu.c: Introduce a translation tag for the page table cache
target/riscv: Add Smdbltrp ISA extension enable switch
target/riscv: Implement Smdbltrp behavior
target/riscv: Implement Smdbltrp sret, mret and mnret behavior
target/riscv: Add Smdbltrp CSRs handling
target/riscv: Add Ssdbltrp ISA extension enable switch
target/riscv: Implement Ssdbltrp exception handling
target/riscv: Implement Ssdbltrp sret, mret and mnret behavior
target/riscv: Add Ssdbltrp CSRs handling
target/riscv: Fix henvcfg potentially containing stale bits
target/riscv: Add configuration for S[m|s]csrind, Smcdeleg/Ssccfg
target/riscv: Add implied rule for counter delegation extensions
target/riscv: Invoke pmu init after feature enable
target/riscv: Add counter delegation/configuration support
target/riscv: Add select value range check for counter delegation
target/riscv: Add counter delegation definitions
target/riscv: Add properties for counter delegation ISA extensions
target/riscv: Support generic CSR indirect access
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
hw/char/riscv_htif: Convert HTIF_DEBUG() to trace events
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250116223609.81594-1-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Alexey Baturo [Mon, 13 Jan 2025 19:44:09 +0000 (22:44 +0300)]
target/riscv: Support Supm and Sspm as part of Zjpm v1.0
The Zjpm v1.0 spec states there should be Supm and Sspm extensions that
are used in profile specification. Enabling Supm extension enables both
Ssnpm and Smnpm, while Sspm enables only Smnpm.
Signed-off-by: Alexey Baturo <baturo.alexey@gmail.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250113194410.1307494-1-baturo.alexey@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Jason Chien [Fri, 8 Nov 2024 11:01:47 +0000 (19:01 +0800)]
hw/riscv/riscv-iommu.c: Introduce a translation tag for the page table cache
This commit introduces a translation tag to avoid invalidating an entry
that should not be invalidated when IOMMU executes invalidation commands.
E.g. IOTINVAL.VMA with GV=0, AV=0, PSCV=1 invalidates both a mapping
of single stage translation and a mapping of nested translation with
the same PSCID, but only the former one should be invalidated.
Signed-off-by: Jason Chien <jason.chien@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20241108110147.11178-1-jason.chien@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Clément Léger [Thu, 16 Jan 2025 13:15:36 +0000 (14:15 +0100)]
target/riscv: Add Smdbltrp ISA extension enable switch
Add the switch to enable the Smdbltrp ISA extension and disable it for
the max cpu. Indeed, OpenSBI when Smdbltrp is present, M-mode double
trap is enabled by default and MSTATUS.MDT needs to be cleared to avoid
taking a double trap. OpenSBI does not currently support it so disable
it for the max cpu to avoid breaking regression tests.
Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20250116131539.2475785-1-cleger@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Clément Léger [Fri, 10 Jan 2025 12:54:39 +0000 (13:54 +0100)]
target/riscv: Implement Smdbltrp behavior
When the Smsdbltrp ISA extension is enabled, if a trap happens while
MSTATUS.MDT is already set, it will trigger an abort or an NMI is the
Smrnmi extension is available.
Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-9-cleger@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Clément Léger [Fri, 10 Jan 2025 12:54:38 +0000 (13:54 +0100)]
target/riscv: Implement Smdbltrp sret, mret and mnret behavior
When the Ssdbltrp extension is enabled, SSTATUS.MDT field is cleared
when executing sret if executed in M-mode. When executing mret/mnret,
SSTATUS.MDT is cleared.
Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-8-cleger@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Clément Léger [Fri, 10 Jan 2025 12:54:34 +0000 (13:54 +0100)]
target/riscv: Implement Ssdbltrp sret, mret and mnret behavior
When the Ssdbltrp extension is enabled, SSTATUS.SDT field is cleared
when executing sret. When executing mret/mnret, SSTATUS.SDT is cleared
when returning to U, VS or VU and VSSTATUS.SDT is cleared when returning
to VU from HS.
Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-4-cleger@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Clément Léger [Fri, 10 Jan 2025 12:54:33 +0000 (13:54 +0100)]
target/riscv: Add Ssdbltrp CSRs handling
Add ext_ssdbltrp in RISCVCPUConfig and implement MSTATUS.SDT,
{H|M}ENVCFG.DTE and modify the availability of MTVAL2 based on the
presence of the Ssdbltrp ISA extension.
Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-3-cleger@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Clément Léger [Fri, 10 Jan 2025 12:54:32 +0000 (13:54 +0100)]
target/riscv: Fix henvcfg potentially containing stale bits
With the current implementation, if we had the following scenario:
- Set bit x in menvcfg
- Set bit x in henvcfg
- Clear bit x in menvcfg
then, the internal variable env->henvcfg would still contain bit x due
to both a wrong menvcfg mask used in write_henvcfg() as well as a
missing update of henvcfg upon menvcfg update.
This can lead to some wrong interpretation of the context. In order to
update henvcfg upon menvcfg writing, call write_henvcfg() after writing
menvcfg. Clearing henvcfg upon writing the new value is also needed in
write_henvcfg() as well as clearing henvcfg upper part when writing it
with write_henvcfgh().
Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250110125441.3208676-2-cleger@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Atish Patra [Fri, 10 Jan 2025 08:21:37 +0000 (00:21 -0800)]
target/riscv: Invoke pmu init after feature enable
The dependant ISA features are enabled at the end of cpu_realize
in finalize_features. Thus, PMU init should be invoked after that
only. Move the init invocation to riscv_tcg_cpu_finalize_features.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-9-e83d797ae294@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Kaiwen Xue [Fri, 10 Jan 2025 08:21:35 +0000 (00:21 -0800)]
target/riscv: Add select value range check for counter delegation
This adds checks in ops performed on xireg and xireg2-xireg6 so that the
counter delegation function will receive a valid xiselect value with the
proper extensions enabled.
Atish Patra [Fri, 10 Jan 2025 08:21:33 +0000 (00:21 -0800)]
target/riscv: Add properties for counter delegation ISA extensions
This adds the properties for counter delegation ISA extensions
(Smcdeleg/Ssccfg). Definitions of new registers and and implementation
will come in the next set of patches.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-5-e83d797ae294@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Kaiwen Xue [Fri, 10 Jan 2025 08:21:32 +0000 (00:21 -0800)]
target/riscv: Support generic CSR indirect access
This adds the indirect access registers required by sscsrind/smcsrind
and the operations on them. Note that xiselect and xireg are used for
both AIA and sxcsrind, and the behavior of accessing them depends on
whether each extension is enabled and the value stored in xiselect.
Co-developed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-ID: <20250110-counter_delegation-v5-4-e83d797ae294@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
hw/riscv/virt: Remove unnecessary use of &first_cpu
virt_machine_init() creates the HARTs vCPUs, then later
virt_machine_done() calls create_fdt_sockets(), so the
latter has access to the first vCPU via:
Directly use that instead of the &first_cpu global.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250112231344.34632-3-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/riscv: Have kvm_riscv_get_timebase_frequency() take RISCVCPU cpu
Keep kvm_riscv_get_timebase_frequency() prototype aligned with
the other ones declared in "kvm_riscv.h", have it take a RISCVCPU
cpu as argument. Include "target/riscv/cpu-qom.h" which declares
the RISCVCPU typedef.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250112231344.34632-2-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Frank Chang [Mon, 6 Jan 2025 05:43:36 +0000 (13:43 +0800)]
target/riscv: Add Zicfilp support for Smrnmi
Zicfilp extension introduces the MNPELP (bit 9) in mnstatus.
The MNPELP field holds the previous ELP.
When a RNMI trap is delivered, the MNPELP is set to ELP and ELP set
to NO_LP_EXPECTED. Upon a mnret, if the mnstatus.MNPP holds the
value y, then ELP is set to the value of MNPELP if yLPE is 1;
otherwise, it is set to NO_LP_EXPECTED.
Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-7-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Tommy Wu [Mon, 6 Jan 2025 05:43:35 +0000 (13:43 +0800)]
target/riscv: Add Smrnmi cpu extension
This adds the properties for ISA extension Smrnmi.
Also, when Smrnmi is present, the firmware (e.g., OpenSBI) must set
mnstatus.NMIE to 1 before enabling any interrupts. Otherwise, all
interrupts will be disabled. Since our current OpenSBI does not
support Smrnmi yet, let's disable Smrnmi for the 'max' type CPU for
now. We can re-enable it once OpenSBI includes proper support for it.
Signed-off-by: Frank Chang <frank.chang@sifive.com> Signed-off-by: Tommy Wu <tommy.wu@sifive.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-6-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Tommy Wu [Mon, 6 Jan 2025 05:43:34 +0000 (13:43 +0800)]
target/riscv: Add Smrnmi mnret instruction
This patch adds a new instruction 'mnret'. 'mnret' is an M-mode-only
instruction that uses the values in `mnepc` and `mnstatus` to return to the
program counter, privilege mode, and virtualization mode of the
interrupted context.
Signed-off-by: Frank Chang <frank.chang@sifive.com> Signed-off-by: Tommy Wu <tommy.wu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-5-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Tommy Wu [Mon, 6 Jan 2025 05:43:33 +0000 (13:43 +0800)]
target/riscv: Handle Smrnmi interrupt and exception
Because the RNMI interrupt trap handler address is implementation defined.
We add the 'rnmi-interrupt-vector' and 'rnmi-exception-vector' as the property
of the harts. It’s very easy for users to set the address based on their
expectation. This patch also adds the functionality to handle the RNMI signals.
Signed-off-by: Frank Chang <frank.chang@sifive.com> Signed-off-by: Tommy Wu <tommy.wu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-4-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Tommy Wu [Mon, 6 Jan 2025 05:43:32 +0000 (13:43 +0800)]
target/riscv: Add Smrnmi CSRs
The Smrnmi extension adds the 'mnscratch', 'mnepc', 'mncause',
'mnstatus' CSRs.
Signed-off-by: Frank Chang <frank.chang@sifive.com> Signed-off-by: Tommy Wu <tommy.wu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-3-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Tommy Wu [Mon, 6 Jan 2025 05:43:31 +0000 (13:43 +0800)]
target/riscv: Add 'ext_smrnmi' in the RISCVCPUConfig
The boolean variable 'ext_smrnmi' is used to determine whether the
Smrnmi extension exists.
Signed-off-by: Frank Chang <frank.chang@sifive.com> Signed-off-by: Tommy Wu <tommy.wu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106054336.1878291-2-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Zjpm extension is finally ratified. And it's much simplier compared to the experimental one.
The newer version doesn't allow to specify custom mask or base for pointer masking.
Instead it allows only certain options for masking top bits.
Signed-off-by: Alexey Baturo <baturo.alexey@gmail.com> Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106102346.1100149-2-baturo.alexey@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/riscv: add trace in riscv_raise_exception()
When using system mode we can get the CPU traps being taken via the
'riscv_trap' trace or the "-d int" qemu log. User mode does not a way of
logging/showing exceptions to users.
Add a trace in riscv_raise_exception() to allow qemu-riscv(32/64) users
to check all exceptions being thrown. This is particularly useful to
help identifying insns that are throwing SIGILLs.
As it is today we need to debug their binaries to identify where the
illegal insns are:
After this change users can capture the trace and use EPC to pinpoint
the insn:
$ ~/work/qemu/build/qemu-riscv64 -cpu rv64 -trace riscv_exception ./foo.out
riscv_exception 8 (user_ecall) on epc 0x17cd2
riscv_exception 8 (user_ecall) on epc 0x17cda
riscv_exception 8 (user_ecall) on epc 0x17622
(...)
riscv_exception 2 (illegal_instruction) on epc 0x1053a
Illegal instruction (core dumped)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20250106173734.412353-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/riscv: use RISCVException enum in exception helpers
Do a cosmetic change in riscv_raise_exception() to change 'exception'
type from uint32_t to RISCVException, making it a bit clear that the
arg is directly correlated to the RISCVException enum.
As a side effect, change 'excp' type from int to RISCVException in
generate_exception() to guarantee that all callers of
riscv_raise_exception() will use the enum.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250106173734.412353-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We can claim support for 'sha' by checking if we have RVH and ssstateen.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-10-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"For each supported virtual memory scheme SvNN supported in satp, the
corresponding hgatp SvNNx4 mode must be supported. The hgatp mode Bare
must also be supported."
Claim support for shgatpa since this is always true for TCG.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-9-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"All translation modes supported in satp must be supported in vsatp."
This is always true in TCG so let's claim support for it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-8-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"vstvec.MODE must be capable of holding the value 0 (Direct).
When vstvec.MODE=Direct, vstvec.BASE must be capable of holding any
valid four-byte-aligned address."
This is always true for TCG so let's claim support for it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-7-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"htval must be written with the faulting guest physical address
in all circumstances permitted by the ISA."
This is the case since commit 3067553993, so claim support for shtvala.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"vstval must be written in all cases described above for stval."
By "cases describe above" the doc refer to the description of sstvala:
"stval must be written with the faulting virtual address for load,
store, and instruction page-fault, access-fault, and misaligned
exceptions, and for breakpoint exceptions other than those caused by
execution of the EBREAK or C.EBREAK instructions. For
virtual-instruction and illegal-instruction exceptions, stval must be
written with the faulting instruction."
We already have sstvala, and our vstval follows the same rules as stval,
so we can claim to support shvstvala too.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
"For any hpmcounter that is not read-only zero, the corresponding bit in
hcounteren must be writable."
This is always true in TCG so let's claim support for it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20241218114026.1652352-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Yanfeng Liu [Sun, 15 Dec 2024 21:36:35 +0000 (05:36 +0800)]
riscv/gdbstub: add V bit to priv reg
This adds virtualization mode (V bit) as bit(2) of register `priv`
per RiscV debug spec v1.0.0-rc4. Checked with gdb-multiarch v12.1.
Note that GDB may display `INVALID` tag for `priv` reg when V bit
is set, this doesn't affect actual access to the bit though.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <tencent_1993B55C24DE7979BF34B200F78287002907@qq.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Stefan Hajnoczi [Sat, 18 Jan 2025 23:37:16 +0000 (18:37 -0500)]
Merge tag 'qtest-20250117-pull-request' of https://gitlab.com/farosas/qemu into staging
Qtest pull request
- RISCV CSR test
- migration recover changed to OOB
- removal of dead code in test-x86-cpuid-compat
# -----BEGIN PGP SIGNATURE-----
#
# iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmeKbx4QHGZhcm9zYXNA
# c3VzZS5kZQAKCRDHmNx0G+wxnRD7D/9v4ovvGn/IwSXjjpOpkjhCSgV8TMi1F61P
# hqB5TTCY8yejvT7JauplMUHmcJsVCNx+HF36D+YjxBjqrhQE8vzPRXgcLxHL9RX4
# Kwgdk24kFKADE3gsiys9gOpwRhmtY0/2CT5LvitfJRMxUNPtm0Mr7qM3Z0Taeusu
# lxZgIMTBeNakpY5vua8nlLQ4r+/Df6S3TFFAaQ4UYab/T5zHVcjKaySXDlT1QXpp
# M+Be21jPxuUYJnKCSxMCUtuY9wkSPcITzJW91V+JxL9STSpsKpnQe10JWDRbwLBt
# /am2Jg5f8iFEblCwr5aQRMwXB+e/Y7K4qKPOUalj+weGnCXh9DmWPXnV6qzdZNO8
# sePKoFj1AMtqbVf3iOpDBRkH8dECiDh1jHmflW1grF0BuOwOw8dKYW+i2qz9ZDiW
# rKWKfRcZZ059aOCQWqpMC9TGQ8osMC/v6GGJwiPBDLapGjnAm5d1683w4Z1l8tAg
# vf9yti2mpzK15PB6doEj/IuZr8WKWFMklizmMMZpXgHIUpjtm3JFKXX/jGHcD3KU
# E8F4ns3zPMlq7ncIwc6GADRB3XzEuzzuXAaEO8HMN0fYHevfnFIon749udyBDI/n
# a1/CTzTmchItwzgpdvcoiKO6gkg6DO9n08QULCMPSVCtl5KAlz5yuwxWGI/rM6u7
# ixPi8i24oA==
# =i4AD
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Jan 2025 09:54:22 EST
# gpg: using RSA key AA1B48B0A22326A5A4C364CFC798DC741BEC319D
# gpg: issuer "farosas@suse.de"
# gpg: Good signature from "Fabiano Rosas <farosas@suse.de>" [unknown]
# gpg: aka "Fabiano Almeida Rosas <fabiano.rosas@suse.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: AA1B 48B0 A223 26A5 A4C3 64CF C798 DC74 1BEC 319D
* tag 'qtest-20250117-pull-request' of https://gitlab.com/farosas/qemu:
tests/qtest/test-x86-cpuid-compat: Remove tests related to pc-i440fx-2.3
tests/qtest/migration: Use out-of-band execution for migrate-recover
tests/qtest: Introduce qtest_init_with_env_and_capabilities()
tests/qtest: QTest example for RISC-V CSR register
target/riscv: Add RISC-V CSR qtest support
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
softfloat: Constify helpers returning float_status field
These helpers don't alter float_status. Make it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250116214359.67295-1-philmd@linaro.org>
Ilya Leoshkevich [Thu, 16 Jan 2025 21:31:33 +0000 (22:31 +0100)]
accel/tcg: Call tcg_tb_insert() for one-insn TBs
Currently one-insn TBs created from I/O memory are not added to
region_trees. Therefore, when they generate exceptions, they are not
handled by cpu_restore_state_from_tb().
For x86 this is not a problem, because x86_restore_state_to_opc() only
restores pc and cc, which already have the correct values if the first
TB instruction causes an exception. However, on several other
architectures, restore_state_to_opc() is not stricly limited to state
restoration and affects some exception-related registers, where guests
can notice incorrect values, for example:
Fix by always calling tcg_tb_insert(). This may increase the size of
region_trees, but tcg_region_reset_all() clears it once code_gen_buffer
fills up, so it will not grow uncontrollably.
Do not call tb_link_page(), which would add such TBs to the QHT, to
prevent tb_lookup() from finding them. These TBs are single-use, since
subsequent reads from I/O memory may return different values; they are
not removed from code_gen_buffer only in order to keep things simple.
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250116213214.5695-2-iii@linux.ibm.com>
Stefan Hajnoczi [Fri, 17 Jan 2025 15:13:07 +0000 (10:13 -0500)]
Merge tag 'pull-10.0-gdb-plugins-doc-updates-170125-1' of https://gitlab.com/stsquad/qemu into staging
semihosting, plugin and doc updates:
- log a guest_error for failed semihosting open()
- clean up semihosting includes to reduce build duplication
- re-factor misc device initialisation to fail with &error_exit
- propagate Error * to gdbserver_start sub-functions
- fix 32-bit build of plugins and re-enable by default
- ensure IRQs don't preempt io recompiled instructions
- remove usage of gcc_struct to enable clang builds
- enable clang/lld to build plugins on windows
- various small kdoc typo fixes
- add perl scripts to editorconfig
- remove unused field from MemoryRegion
- make kdoc script a dependency so doc rebuilds get triggered
- expand developer documentation:
- notes on git-publish
- describe usage of b4
- setting up build dependencies
- codebase layout
- add a glossary of common terms
- optimise the windows ndis script
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeKO8sACgkQ+9DbCVqe
# KkTbBQf9HRlspCl2r5a8K9O1ymylKiZ653OBWMStGTQ8xPXeLDFhT+ION34VBgBh
# LXHEcjIHn24cN2s1BO5+xJs0nzqYe7UEAK6JQmdX3/HEuf8VmaVslvhm+nCWKoIL
# JQbsHno92wh6vvTWQu53zijEuG5HdBseWiwQKHbE1oSRc2CikG70o902AL9zXAsp
# mpUYWxUmWwg5uQATztp4XfylJBcSX3SiVgv22jXLqBj9drXPftl/E33fcWXxTj5f
# AM3kz9fxaCfo5+znmYw3R1tT/Hv52Q6hW+oNAm34XeWp1/+ho27QMRrpIi/dpdwX
# mCbvJwI75sCnD91p9NW7vZIYZJKsLg==
# =SLCY
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 17 Jan 2025 06:15:23 EST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-10.0-gdb-plugins-doc-updates-170125-1' of https://gitlab.com/stsquad/qemu: (37 commits)
scripts/nsis.py: Run dependency check for each DLL file only once
docs: add a glossary
docs/devel: add a codebase section
docs/devel: add information on how to setup build environments
docs/devel: add b4 for patch retrieval
docs/devel: add git-publish for patch submitting
docs/sphinx: include kernel-doc script as a dependency
include/exec: remove warning_printed from MemoryRegion
include/exec: fix some copy and paste errors in kdoc
tests/qtest: fix some copy and paste errors in kdoc
editorconfig: update for perl scripts
plugins: fix kdoc annotation
plugins: enable linking with clang/lld
docs/devel/style: add a section about bitfield, and disallow them for packed structures
win32: remove usage of attribute gcc_struct
accel/tcg: also suppress asynchronous IRQs for cpu_io_recompile
configure: reenable plugins by default for 32-bit hosts
contrib/plugins/hotpages: fix 32-bit build
contrib/plugins/hwprofile: fix 32-bit build
contrib/plugins/cflow: fix 32-bit build
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (38 commits)
i386/cpu: Set and track CPUID_EXT3_CMP_LEG in env->features[FEAT_8000_0001_ECX]
i386/cpu: Set up CPUID_HT in x86_cpu_expand_features() instead of cpu_x86_cpuid()
cpu: Remove nr_cores from struct CPUState
i386/cpu: Hoist check of CPUID_EXT3_TOPOEXT against threads_per_core
i386/cpu: Track a X86CPUTopoInfo directly in CPUX86State
i386/topology: Introduce helpers for various topology info of different level
i386/topology: Update the comment of x86_apicid_from_topo_ids()
i386/cpu: Drop cores_per_pkg in cpu_x86_cpuid()
i386/cpu: Drop the variable smp_cores and smp_threads in x86_cpu_pre_plug()
i386/cpu: Extract a common fucntion to setup value of MSR_CORE_THREAD_COUNT
target/i386/kvm: Replace ARRAY_SIZE(msr_handlers) with KVM_MSR_FILTER_MAX_RANGES
target/i386/kvm: Clean up error handling in kvm_arch_init()
target/i386/kvm: Return -1 when kvm_msr_energy_thread_init() fails
target/i386/kvm: Clean up return values of MSR filter related functions
target/i386/confidential-guest: Fix comment of x86_confidential_guest_kvm_type()
target/i386/kvm: Drop workaround for KVM_X86_DISABLE_EXITS_HTL typo
target/i386/kvm: Only save/load kvmclock MSRs when kvmclock enabled
target/i386/kvm: Remove local MSR_KVM_WALL_CLOCK and MSR_KVM_SYSTEM_TIME definitions
target/i386/kvm: Add feature bit definitions for KVM CPUID
i386/cpu: Mark avx10_version filtered when prefix is NULL
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Thomas Huth [Fri, 17 Jan 2025 10:27:36 +0000 (11:27 +0100)]
tests/qtest/test-x86-cpuid-compat: Remove tests related to pc-i440fx-2.3
The pc-i440fx-2.3 machine type has been removed in commit 46a2bd5257
("hw/i386/pc: Remove deprecated pc-i440fx-2.3 machine") already, so
these tests are just dead code by now.
Juraj Marcin [Tue, 7 Jan 2025 16:31:54 +0000 (17:31 +0100)]
tests/qtest/migration: Use out-of-band execution for migrate-recover
In real use cases, the migrate-recover command requires out-of-band
execution, because the thread processing normal commands is blocked by a
page fault in the guest memory. With this change, the tests will be
closer to real use cases and could help detect regressions and other
bugs in migration recovery.
Signed-off-by: Juraj Marcin <jmarcin@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de>
This patch adds a new version of qtest_init_with_env() that allows
specifying QMP capabilities that should be enabled during handshake.
This is useful for example if a test needs out-of-band execution of QMP
commands, it can initialize with the oob capability.
Signed-off-by: Juraj Marcin <jmarcin@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de>
Ivan Klokov [Thu, 9 Jan 2025 09:10:43 +0000 (12:10 +0300)]
target/riscv: Add RISC-V CSR qtest support
The RISC-V architecture supports the creation of custom
CSR-mapped devices. It would be convenient to test them in the same way
as MMIO-mapped devices. To do this, a new call has been added
to read/write CSR registers.
Signed-off-by: Ivan Klokov <ivan.klokov@syntacore.com> Acked-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Fabiano Rosas <farosas@suse.de>
Stefan Weil [Thu, 16 Jan 2025 16:03:06 +0000 (16:03 +0000)]
scripts/nsis.py: Run dependency check for each DLL file only once
Each DLL should only be checked once for dependencies, but
several hundred (781 in my test) unneeded checks were done.
Now the script is significantly faster (16 s in my build).
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250111215244.1680931-1-sw@weilnetz.de> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-38-alex.bennee@linaro.org>
projects / thirdparty / qemu.git / log
