Aradhya Bhatia [Wed, 28 May 2025 12:25:44 +0000 (17:55 +0530)]
drm/tidss: Add OLDI bridge support
The AM62x and AM62Px SoCs feature 2 OLDI TXes each, which makes it
possible to connect them in dual-link or cloned single-link OLDI display
modes. The current OLDI support in tidss_dispc.c can only support for
a single OLDI TX, connected to a VP and doesn't really support
configuration of OLDIs in the other modes. The current OLDI support in
tidss_dispc.c also works on the principle that the OLDI output can only
be served by one, and only one, DSS video-port. This isn't the case in
the AM62Px SoC, where there are 2 DSS controllers present that share the
OLDI TXes.
Having their own devicetree and their own bridge entity will help
support the various display modes and sharing possiblilities of the OLDI
hardware.
For all these reasons, add support for the OLDI TXes as DRM bridges.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev> Tested-by: Michael Walle <mwalle@kernel.org> # on am67a Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20250528122544.817829-5-aradhya.bhatia@linux.dev Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Aradhya Bhatia [Wed, 28 May 2025 12:25:43 +0000 (17:55 +0530)]
drm/tidss: Mark AM65x OLDI code separately
The dss dt schema and the tidss driver have kept the single-link OLDI in
AM65x integrated with the parent video-port (VP) from DSS (as the OLDI
configuration happens from the source VP only).
To help configure the dual-lvds modes that the OLDI has to offer in
devices AM62x and later, a new OLDI bridge driver will be introduced.
Mark the existing OLDI code separately by renaming all the current OLDI
identifiers with the 'AM65X_' prefix in tidss driver, to help
distinguish from the upcoming OLDI bridge driver.
Aradhya Bhatia [Wed, 28 May 2025 12:25:42 +0000 (17:55 +0530)]
dt-bindings: display: ti: Add schema for AM625 OLDI Transmitter
The OLDI transmitters (TXes) do not have registers of their own, and are
dependent on the source video-ports (VPs) from the DSS to provide
configuration data. This hardware doesn't directly sit on the internal
bus of the SoC, but does so via the DSS. Hence, the OLDI TXes are
supposed to be child nodes under the DSS, and not independent devices.
Two of the OLDI TXes can function in tandem to output dual-link OLDI
output, or cloned single-link outputs. In these cases, one OLDI will be
the primary OLDI, and the other one, a companion. The following diagram
represents such a configuration.
The DSS in AM625 SoC has a configuration like the one above. The AM625
DSS VP1 (port@0) can connect and control 2 OLDI TXes, to use them in
dual-link or cloned single-link OLDI modes. It is only the VP1 that can
connect to either OLDI TXes for the AM625 DSS, and not the VP2.
Alternatively, on some future TI SoCs, along with the above
configuration, the OLDI TX can _also_ connect to separate video sources,
making them work entirely independent of each other. In this case,
neither of the OLDIs are "companion" or "secondary" OLDIs, and nor do
they require one. They both are independent and primary OLDIs. The
following diagram represents such a configuration.
Note that depending on the mux configuration, the OLDIs can either be
working together in tandem - sourced by VP1, OR, they could be working
independently sourced by VP1 and VP3 respectively.
The idea is to support all the configurations with this OLDI TX schema.
The OLDI functionality is further supported by a system-control module,
which contains a few registers to control OLDI IO power and other
electrical characteristics of the IO lanes.
Add devicetree binding schema for the OLDI TXes to support various
configurations, and extend their support to the AM625 DSS.
Vignesh Raman [Mon, 23 Jun 2025 08:50:27 +0000 (14:20 +0530)]
drm/ci: Add jobs to validate devicetrees
Add jobs to run dt_binding_check and dtbs_check. If warnings are seen,
exit with a non-zero error code while configuring them as warning in
the GitLab CI pipeline.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com> Acked-by: Helen Koike <helen.fornazier@gmail.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250623085033.39680-2-vignesh.raman@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add a new gpu node in mt8370.dtsi to enable support for the
ARM Mali G57 MC2 GPU (Valhall-JM) found on the MT8370 SoC, using the
Panfrost driver.
On a Mediatek Genio 510 EVK board, the panfrost driver probed with the
following message:
```
panfrost 13000000.gpu: clock rate = 390000000
panfrost 13000000.gpu: mali-g57 id 0x9093 major 0x0 minor 0x0 status 0x0
panfrost 13000000.gpu: features: 00000000,000019f7, issues: 00000003, 80000400
panfrost 13000000.gpu: Features: L2:0x08130206 Shader:0x00000000
Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
panfrost 13000000.gpu: shader_present=0x5 l2_present=0x1
[drm] Initialized panfrost 1.3.0 for 13000000.gpu on minor 0
```
drm/panfrost: Add support for Mali on the MT8370 SoC
Add a compatible for the MediaTek MT8370 SoC, with an integrated ARM
Mali G57 MC2 GPU (Valhall-JM, dual core), with new platform data for
its support in the panfrost driver.
It uses the same data as MT8186 for the power management features to
describe power supplies, pm_domains and enablement (one regulator, two
power domains) but also sets the FORCE_AARCH64_PGTABLE flag in the GPU
configuration quirks bitfield to enable AARCH64 4K page table format
mode.
As MT8186 and MT8370 SoC have different GPU architecture (Mali G52 2EE
MC2 for MT8186), making them not compatible, and this mode is only
enabled for Mediatek SoC that are Mali G57 based (compatible with
mediatek,mali-mt8188 or mediatek,mali-8192), having specific platform
data allows to set this flag for MT8370 without modifying MT8186
configuration and behaviour.
Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-4-2833888cb1d3@collabora.com
drm/panfrost: Commonize Mediatek power domain array definitions
In the panfrost driver, the platform data of several Mediatek SoC
declares and uses several different power domains arrays according to
GPU core number present in the SoC:
- mediatek_mt8186_pm_domains (2 cores)
- mediatek_mt8183_pm_domains (3 cores)
- mediatek_mt8192_pm_domains (5 cores)
As they all are fixed arrays, starting with the same entries and the
platform data also has a power domains array length field
(num_pm_domains), they can be replaced by a single array, containing
all entries, if the num_pm_domains field of the platform data is also
set to the matching core number.
So, create a generic power domain array (mediatek_pm_domains) and use
it in the mt8183(b), mt8186, mt8188 and mt8192 platform data instead.
drm/panfrost: Drop duplicated Mediatek supplies arrays
In the panfrost driver, the platform data of several Mediatek SoC
declares and uses custom supplies array definitions
(mediatek_mt8192_supplies, mediatek_mt8183_b_supplies), that are the
same as default_supplies (used by default platform data).
So drop these duplicated definitions and use default_supplies instead.
Also, rename mediatek_mt8183_supplies to a more generic name too
(legacy_supplies).
dt-bindings: gpu: mali-bifrost: Add compatible for MT8370 SoC
Add a compatible for the MediaTek MT8370 SoC, with an
integrated ARM Mali G57 MC2 GPU (Valhall-JM, dual core).
None of the already existing SoC specific compatibles is usable as
fallback, as those either do not match the number of cores (and number
of power domains), or are for a different GPU architecture.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20250509-mt8370-enable-gpu-v6-1-2833888cb1d3@collabora.com
Luca Ceresoli [Wed, 28 May 2025 09:29:36 +0000 (11:29 +0200)]
drm/bridge: tc358767: convert to devm_drm_bridge_alloc() API
This is the new API for allocating DRM bridges.
Converting this driver is a bit complex because the drm_bridge funcs
pointer differs based on the bridge mode. So the current code does:
* tc_probe()
* devm_kzalloc() private struct embedding drm_bridge
* call tc_probe_bridge_endpoint() which
* parses DT description into struct fields
* computes the mode
* calls different bridge init functions based on the mode
* each sets a different bridge.funcs pointer
The new API expects the funcs pointer to be known at alloc time, which does
not fit in the current code structure.
Solve this by splitting tc_probe_bridge_endpoint() in two functions:
* tc_probe_get_mode(), computing the mode without needing the private
driver structure
* tc_probe_bridge_endpoint(), only initializing the endpoints
So now the mode is known before allocation and so
is the funcs pointer, while all other operations are still happening after
allocation, directly into the private struct data, as they used to.
The new code flow is:
* tc_probe()
* tc_probe_get_mode()
* parses DT description
* computes and returns the mode
* based onf the mode, pick the funcs pointer
* devm_drm_bridfge_alloc(..., funcs)
* call tc_probe_bridge_endpoint() which
* calls different bridge init functions based on the mode
* these don't set the funcs pointer, it was done by _alloc
This solution is chosen to minimize the changes in the driver logical code
flow. The drawback is we now iterate twice over the endpoints during probe.
drm/format-helper: Move drm_fb_build_fourcc_list() to sysfb helpers
Only sysfb drivers use drm_fb_build_fourcc_list(). Move the function
to sysfb helpers and rename it accordingly. Update drivers and tests.
v3:
- update naming in tests
v2:
- select DRM_SYSFB_HELPER (kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20250616083846.221396-4-tzimmermann@suse.de
drm/tests: Test drm_fb_build_fourcc_list() in separate test suite
Only sysfb drivers use drm_fb_build_fourcc_list(). The helper will
be moved from format helpers to sysfb helpers. Moving the related
tests to their own test suite.
v3:
- rename tests according to filename (José)
v2:
- rename filename to match tested code (Maxime)
drm/tests: Do not use drm_fb_blit() in format-helper tests
Export additional helpers from the format-helper library and open-code
drm_fb_blit() in tests. Prepares for the removal of drm_fb_blit(). Only
sysfb drivers use drm_fb_blit(). The function will soon be removed from
format helpers and be refactored within sysfb helpers.
Ian Forbes [Tue, 29 Apr 2025 20:34:27 +0000 (15:34 -0500)]
drm/vmwgfx: Fix Host-Backed userspace on Guest-Backed kernel
Running 3D applications with SVGA_FORCE_HOST_BACKED=1 or using an
ancient version of mesa was broken because the buffer was pinned in
VMW_BO_DOMAIN_SYS and could not be moved to VMW_BO_DOMAIN_MOB during
validation.
The compat_shader buffer should not pinned.
Fixes: 668b206601c5 ("drm/vmwgfx: Stop using raw ttm_buffer_object's") Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://lore.kernel.org/r/20250429203427.1742331-1-ian.forbes@broadcom.com
Ian Forbes [Fri, 30 May 2025 18:35:09 +0000 (13:35 -0500)]
drm/vmwgfx: Implement dma_fence_ops properly
vmwgfx's fencing predates dma_fence and as a result dma_fence_ops was never
properly implemented, especially with respect to enabling signaling.
Because of this dma_fence callbacks don't work properly. This change
implements enable_signaling properly so that dma_fence callbacks now
work as expected.
It also removes vmwgfx's custom implementation of fence callbacks
and removes vmwgfx's custom dma_fence_ops::wait function which is no
longer necessary now that enable_signaling works.
Ian Forbes [Fri, 30 May 2025 18:35:08 +0000 (13:35 -0500)]
drm/vmwgfx: Update last_read_seqno under the fence lock
There was a possible race in vmw_update_seqno. Because of this race it
was possible for last_read_seqno to go backwards. Remove this function
and replace it with vmw_update_fences which now sets and returns the
last_read_seqno while holding the fence lock. This serialization via the
fence lock ensures that last_read_seqno is monotonic again.
André Almeida [Tue, 17 Jun 2025 12:49:49 +0000 (09:49 -0300)]
drm/amdgpu: Make use of drm_wedge_task_info
To notify userspace about which task (if any) made the device get in a
wedge state, make use of drm_wedge_task_info parameter, filling it with
the task PID and name.
André Almeida [Tue, 17 Jun 2025 12:49:47 +0000 (09:49 -0300)]
drm/doc: Add a section about "Task information" for the wedge API
Add a section about "Task information" for the wedge API.
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250617124949.2151549-5-andrealmeid@igalia.com Signed-off-by: André Almeida <andrealmeid@igalia.com>
André Almeida [Tue, 17 Jun 2025 12:49:46 +0000 (09:49 -0300)]
drm: Create a task info option for wedge events
When a device get wedged, it might be caused by a guilty application.
For userspace, knowing which task was involved can be useful for some
situations, like for implementing a policy, logs or for giving a chance
for the compositor to let the user know what task was involved in the
problem. This is an optional argument, when the task info is not
available, the PID and TASK string won't appear in the event string.
Sometimes just the PID isn't enough giving that the task might be already
dead by the time userspace will try to check what was this PID's name,
so to make the life easier also notify what's the task's name in the user
event.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250617124949.2151549-4-andrealmeid@igalia.com Signed-off-by: André Almeida <andrealmeid@igalia.com>
accel/ivpu: Add turbo flag to the DRM_IVPU_CMDQ_CREATE ioctl
Introduce a new parameter to the DRM_IVPU_CMDQ_CREATE ioctl,
enabling turbo mode for jobs submitted via the command queue.
Turbo mode allows jobs to run at higher frequencies,
potentially improving performance for demanding workloads.
Also adds the IVPU_TEST_MODE_TURBO_DISABLE flag to allow test
mode to explicitly disable turbo mode requested by the application.
The IVPU_TEST_MODE_TURBO mode has been renamed to
IVPU_TEST_MODE_TURBO_ENABLE for clarity and consistency.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://lore.kernel.org/r/20250605162001.1237789-1-maciej.falkowski@linux.intel.com
Add support for Wildcat Lake (WCL) CPUs.
Wildcat Lake contains NPU5 just like Panther Lake
hence the initial support is very simple and adds
only PCI IDs.
video: Make global edid_info depend on CONFIG_FIRMWARE_EDID
Protect global edid_info behind CONFIG_FIRMWARE_EDID and remove
the config tests for CONFIG_X86. Makes edid_info available iff
its option has been enabled.
video: Make CONFIG_FIRMWARE_EDID generally available
DRM drivers such as efidrm and vesadrm can export firmware EDID
data to userspace. Make the related option CONFIG_FIRMWARE_EDID
available without CONFIG_FB. Make it depend on X86, which is
currently the only architecture providing EDID information.
drivers/video/fbdev/via/via-core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/via/via_i2c.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/sis/sis_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
The affected symbols are not used outside of their module. Some of
the symbols are not used anywhere, so remove the functions entirely.
Also remove the related, but unused, define SISFB_HAVE_MALLOC_NEW.
drivers/video/fbdev/omap2/omapfb/dss/dpi.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/dss/sdi.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present
drivers/video/fbdev/omap2/omapfb/dss/apply.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dispc-compat.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/display.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dss-of.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/dss_features.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/output.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/overlay.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/dss/venc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap2/omapfb/vrfb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap/lcd_dma.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap/lcdc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/omap/omapfb_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/g450_pll.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_DAC1064.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_Ti3026.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_accel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_base.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_g450.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/matrox/matroxfb_misc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/c2p_iplan2.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/c2p_planar.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbcopyarea.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbfillrect.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/cfbimgblt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_ddc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_defio.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_io_fops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fb_sys_fops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbcmap.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbcon.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/fbmon.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/modedb.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/svgalib.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/syscopyarea.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/sysfillrect.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/core/sysimgblt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/macmodes.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/sbuslib.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/video/fbdev/wmt_ge_rops.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/tests/ttm_kunit_helpers.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/tests/ttm_mock_manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_agp_backend.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_backup.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_bo.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_bo_util.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_bo_vm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_device.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_execbuf_util.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_pool.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_range_manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_resource.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/ttm/ttm_tt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-10-tzimmermann@suse.de
drivers/gpu/drm/scheduler/sched_entity.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/scheduler/sched_fence.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/scheduler/sched_main.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-9-tzimmermann@suse.de
drivers/gpu/drm/drm_panel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_panel_backlight_quirks.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_panel_orientation_quirks.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/panel/panel-samsung-s6e63m0.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-8-tzimmermann@suse.de
drivers/gpu/drm/drm_gem.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_atomic_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_framebuffer_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_ttm_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gem_vram_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-7-tzimmermann@suse.de
drivers/gpu/drm/display/drm_bridge_connector.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_aux_bus.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_cec.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_mst_topology.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dp_tunnel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_dsc_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_audio_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_cec_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_cec_notifier_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_hdmi_state_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/display/drm_scdc_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-6-tzimmermann@suse.de
drivers/gpu/drm/clients/drm_client_setup.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_client.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_client_event.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_client_modeset.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fb_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fbdev_dma.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fbdev_shmem.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fbdev_ttm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-5-tzimmermann@suse.de
drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/aux-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/aux-hpd-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/imx/imx-legacy-bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/panel.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/samsung-dsim.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi2.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_bridge.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_bridge_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-4-tzimmermann@suse.de
drivers/gpu/drm/drm_atomic.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_atomic_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_atomic_state_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_atomic_uapi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_auth.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_buddy.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_color_mgmt.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_connector.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_damage_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_debugfs_crc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_drv.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_edid.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_exec.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_fb_dma_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_file.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_flip_work.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_format_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gpusvm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_gpuvm.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_managed.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_mipi_dbi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_mipi_dsi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_mode_config.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_modeset_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_modeset_lock.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_panic.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_plane.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_plane_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_print.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_privacy_screen.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_self_refresh_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_simple_kms_helper.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_suballoc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_syncobj.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_vblank_work.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_vma_manager.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/drm_writeback.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/lib/drm_random.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
drivers/gpu/drm/tests/drm_kunit_helpers.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") Reviewed-by: André Almeida <andrealmeid@igalia.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20250612121633.229222-3-tzimmermann@suse.de
Maíra Canal [Wed, 11 Jun 2025 20:56:49 +0000 (17:56 -0300)]
drm/vkms: Compile all tests with CONFIG_DRM_VKMS_KUNIT_TEST
The Kconfig option `CONFIG_DRM_VKMS_KUNIT_TESTS` does not exist. However,
the VKMS format tests use such an option for compilation, meaning that
they are not compiled at all.
Use the Kconfig option `CONFIG_DRM_VKMS_KUNIT_TEST` to compile all VKMS
KUnit tests.
Fixes: 3e897853debd ("drm/vkms: Create KUnit tests for YUV conversions") Signed-off-by: Maíra Canal <mcanal@igalia.com> Reviewed-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20250611205704.334527-1-mcanal@igalia.com Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
drm/format-helper: Update tests after BT.601 changes
Commit a979a54165c2 ("drm/format-helper: Normalize BT.601 factors
to 256") improved rounding precision of the BT.601 calculation, which
impacts the results of soem of the format-helper tests. Adapt the test
to the new results.
v2:
- fix spelling in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: a979a54165c2 ("drm/format-helper: Normalize BT.601 factors to 256") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20250613111711.136993-1-tzimmermann@suse.de
Tvrtko Ursulin [Tue, 10 Jun 2025 16:42:26 +0000 (17:42 +0100)]
drm/xe: Make dma-fences compliant with the safe access rules
Xe can free some of the data pointed to by the dma-fences it exports. Most
notably the timeline name can get freed if userspace closes the associated
submit queue. At the same time the fence could have been exported to a
third party (for example a sync_fence fd) which will then cause an use-
after-free on subsequent access.
To make this safe we need to make the driver compliant with the newly
documented dma-fence rules. Driver has to ensure a RCU grace period
between signalling a fence and freeing any data pointed to by said fence.
For the timeline name we simply make the queue be freed via kfree_rcu and
for the shared lock associated with multiple queues we add a RCU grace
period before freeing the per GT structure holding the lock.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> Link: https://lore.kernel.org/r/20250610164226.10817-5-tvrtko.ursulin@igalia.com
Tvrtko Ursulin [Tue, 10 Jun 2025 16:42:25 +0000 (17:42 +0100)]
dma-fence: Add safe access helpers and document the rules
Dma-fence objects currently suffer from a potential use after free problem
where fences exported to userspace and other drivers can outlive the
exporting driver, or the associated data structures.
The discussion on how to address this concluded that adding reference
counting to all the involved objects is not desirable, since it would need
to be very wide reaching and could cause unloadable drivers if another
entity would be holding onto a signaled fence reference potentially
indefinitely.
This patch enables the safe access by introducing and documenting a
contract between fence exporters and users. It documents a set of
contraints and adds helpers which a) drivers with potential to suffer from
the use after free must use and b) users of the dma-fence API must use as
well.
Premise of the design has multiple sides:
1. Drivers (fence exporters) MUST ensure a RCU grace period between
signalling a fence and freeing the driver private data associated with it.
The grace period does not have to follow the signalling immediately but
HAS to happen before data is freed.
2. Users of the dma-fence API marked with such requirement MUST contain
the complete access to the data within a single code block guarded by
rcu_read_lock() and rcu_read_unlock().
The combination of the two ensures that whoever sees the
DMA_FENCE_FLAG_SIGNALED_BIT not set is guaranteed to have access to a
valid fence->lock and valid data potentially accessed by the fence->ops
virtual functions, until the call to rcu_read_unlock().
3. Module unload (fence->ops) disappearing is for now explicitly not
handled. That would required a more complex protection, possibly needing
SRCU instead of RCU to handle callers such as dma_fence_release() and
dma_fence_wait_timeout(), where race between
dma_fence_enable_sw_signaling, signalling, and dereference of
fence->ops->wait() would need a sleeping SRCU context.
Tvrtko Ursulin [Tue, 10 Jun 2025 16:42:24 +0000 (17:42 +0100)]
drm/i915: Protect access to driver and timeline name
Protect the access to driver and timeline name which otherwise could be
freed as dma-fence exported is signalling fences.
This prepares the code for incoming dma-fence API changes which will start
asserting these accesses are done from a RCU locked section.
Now that the safe access is handled in the dma-fence API, the external
callers such as sync_file, and our internal code paths, we can drop the
similar protection from i915_fence_get_timeline_name().
This prepares the code for incoming dma-fence API changes which will start
asserting these accesses are done from a RCU locked section.
drm/format-helper: Normalize BT.601 factors to 256
BT.601 weights RGB components by certain factors to convert the
color to grayscale. Normalize the constants to 256 instead of 10.
Allows for slightly more precise rounding. The division by 256 can
be compiled as an 8-bit shift, which might be faster on some hardware.
Lad Prabhakar [Mon, 9 Jun 2025 22:56:30 +0000 (23:56 +0100)]
drm: renesas: rz-du: mipi_dsi: Add function pointers for configuring VCLK and mode validation
Introduce `dphy_conf_clks` and `dphy_mode_clk_check` callbacks in
`rzg2l_mipi_dsi_hw_info` to configure the VCLK and validate
supported display modes.
On the RZ/V2H(P) SoC, the DSI PLL dividers need to be as accurate as
possible. To ensure compatibility with both RZ/G2L and RZ/V2H(P) SoCs,
function pointers are introduced.
Modify `rzg2l_mipi_dsi_startup()` to use `dphy_conf_clks` for clock
configuration and `rzg2l_mipi_dsi_bridge_mode_valid()` to invoke
`dphy_mode_clk_check` for mode validation.
This change ensures proper operation across different SoC variants
by allowing fine-grained control over clock configuration and mode
validation.
Lad Prabhakar [Mon, 9 Jun 2025 22:56:29 +0000 (23:56 +0100)]
drm: renesas: rz-du: mipi_dsi: Add dphy_late_init() callback for RZ/V2H(P)
Introduce the `dphy_late_init` callback in `rzg2l_mipi_dsi_hw_info` to
allow additional D-PHY register configurations after enabling data and
clock lanes. This is required for the RZ/V2H(P) SoC but not for the
RZ/G2L SoC.
Modify `rzg2l_mipi_dsi_startup()` to invoke `dphy_late_init` if defined,
ensuring SoC-specific initialization is performed only when necessary.
This change prepares for RZ/V2H(P) SoC support while maintaining
compatibility with existing platforms.
Lad Prabhakar [Mon, 9 Jun 2025 22:56:28 +0000 (23:56 +0100)]
drm: renesas: rz-du: mipi_dsi: Add feature flag for 16BPP support
Introduce the `RZ_MIPI_DSI_FEATURE_16BPP` flag in `rzg2l_mipi_dsi_hw_info`
to indicate support for 16BPP pixel formats. The RZ/V2H(P) SoC supports
16BPP, whereas this feature is missing on the RZ/G2L SoC.
Update the `mipi_dsi_host_attach()` function to check this flag before
allowing 16BPP formats. If the SoC does not support 16BPP, return an error
to prevent incorrect format selection.
This change enables finer-grained format support control for different
SoC variants.
Lad Prabhakar [Mon, 9 Jun 2025 22:56:27 +0000 (23:56 +0100)]
drm: renesas: rz-du: mipi_dsi: Use mHz for D-PHY frequency calculations
Pass the HSFREQ in milli-Hz to the `dphy_init()` callback to improve
precision, especially for the RZ/V2H(P) SoC, where PLL dividers require
high accuracy.
These changes prepare the driver for upcoming RZ/V2H(P) SoC support.
Lad Prabhakar [Mon, 9 Jun 2025 22:56:26 +0000 (23:56 +0100)]
drm: renesas: rz-du: mipi_dsi: Make "rst" reset control optional for RZ/V2H(P)
In preparation for adding support for the Renesas RZ/V2H(P) SoC, make the
"rst" reset control optional in the MIPI DSI driver. The RZ/V2H(P) SoC
does not provide this reset line, and attempting to acquire it using the
mandatory API causes probe failure.
Switching to devm_reset_control_get_optional_exclusive() ensures
compatibility with both SoCs that provide this reset line and those that
do not, such as RZ/V2H(P).
Lad Prabhakar [Mon, 9 Jun 2025 22:56:25 +0000 (23:56 +0100)]
drm: renesas: rz-du: mipi_dsi: Add OF data support
n preparation for adding support for the Renesas RZ/V2H(P) SoC, this patch
introduces a mechanism to pass SoC-specific information via OF data in the
DSI driver. This enables the driver to adapt dynamically to various
SoC-specific requirements without hardcoding configurations.
The MIPI DSI interface on the RZ/V2H(P) SoC is nearly identical to the one
on the RZ/G2L SoC. While the LINK registers are shared between the two
SoCs, the D-PHY registers differ. Also the VCLK range differs on both these
SoCs. To accommodate these differences `struct rzg2l_mipi_dsi_hw_info` is
introduced and as now passed as OF data.
These changes lay the groundwork for the upcoming RZ/V2H(P) SoC support by
allowing SoC-specific data to be passed through OF.
Lad Prabhakar [Mon, 9 Jun 2025 22:56:24 +0000 (23:56 +0100)]
drm: renesas: rz-du: mipi_dsi: Use VCLK for HSFREQ calculation
Update the RZ/G2L MIPI DSI driver to calculate HSFREQ using the actual
VCLK rate instead of the mode clock. The relationship between HSCLK and
VCLK is:
vclk * bpp <= hsclk * 8 * lanes
Retrieve the VCLK rate using `clk_get_rate(dsi->vclk)`, ensuring that
HSFREQ accurately reflects the clock rate set in hardware, leading to
better precision in data transmission.
Additionally, use `DIV_ROUND_CLOSEST_ULL` for a more precise division
when computing `hsfreq`. Also, update unit conversions to use correct
scaling factors for better clarity and correctness.
Since `clk_get_rate()` returns the clock rate in Hz, update the HSFREQ
threshold comparisons to use Hz instead of kHz to ensure correct behavior.
Lad Prabhakar [Mon, 9 Jun 2025 22:56:22 +0000 (23:56 +0100)]
drm: renesas: rz-du: mipi_dsi: Add min check for VCLK range
The VCLK range for Renesas RZ/G2L SoC is 5.803 MHz to 148.5 MHz. Add a
minimum clock check in the mode_valid callback to ensure that the clock
value does not fall below the valid range.
I could not figure out what exactly is going on here, but I see that
whenever dispc_restore_context() is not inlined, that function
and its caller shrink below 900 bytes combined of stack usage.
Christian König [Wed, 4 Jun 2025 11:00:38 +0000 (13:00 +0200)]
drm/prime: remove drm_prime_lookup_buf_by_handle
This was added by Sima +10 years ago as a solution to avoid exporting
multiple dma-bufs for the same GEM object. I tried to remove it before,
but wasn't 100% sure about all the side effects.
Now Thomas recent modified drm_gem_prime_handle_to_dmabuf() which makes
it obvious that this is a superflous step. We try to look up the DMA-buf
by handle handle and if that fails for some reason (must likely because
the handle is a duplicate) the code just use the DMA-buf from the GEM
object.
Just using the DMA-buf from the GEM object in the first place has the
same effect as far as I can see.
Some more history from Sima:
In d0b2c5334f41 ("drm/prime: Always add exported buffers to the handle
cache") I added this additional lookup. It wasn't part of the bugfix,
but back then the handle list was just a linked list and you could do
lookups in either direction. And I guess I felt like doing a quick lookup
before we grab the next lock makes sense. Premature optimization, I'm
confessing to the crime guilty as charged :-/
Then Chris Wilson in 077675c1e8a1 ("drm: Convert prime dma-buf <-> handle
to rbtree") and added 2 rb trees to support both directions. At that point
that handle2buf lookup really didn't make much sense anymore, but we just
kept it and it's been in the tree confusing people ever since.
Jani Nikula [Fri, 6 Jun 2025 09:05:12 +0000 (12:05 +0300)]
drm/i915/panel: sync panel prepared state at register
If the panel is enabled at probe, and we take over the hardware state,
the drm_panel prepared state will be out of sync. We'll need to notify
drm_panel framework about the state at probe, so it can in turn notify
the panel followers.
Jani Nikula [Fri, 6 Jun 2025 09:05:11 +0000 (12:05 +0300)]
drm/i915/panel: register drm_panel and call prepare/unprepare for ICL+ DSI
Allocate and register a drm_panel so that drm_panel_followers can find
the panel. Pass the drm_connector::kdev device to drm_panel allocation
for matching. That's only available after drm_sysfs_connector_add(), so
we need to postpone the drm_panel allocation until .late_register()
hook.
The drm_panel framework is moving towards devm_drm_panel_alloc(). It
requires a wrapper struct, and struct intel_panel would be the natural
candidate. However, we can't postpone its allocation until
.late_register(), so we have to use __devm_drm_panel_alloc() directly
for now.
Call the drm_panel_prepare() and drm_panel_unprepare() functions for
ICL+ DSI, so that followers get notified of the panel power state
changes. This can later be expanded to VLV+ DSI and eDP.
Jani Nikula [Fri, 6 Jun 2025 09:05:10 +0000 (12:05 +0300)]
drm/i915/panel: add panel register/unregister
Add panel register/unregister functions, and handle backlight
register/unregister from there. This is in preparation for adding more
panel specific register/unregister functionality.
Jani Nikula [Tue, 10 Jun 2025 09:41:32 +0000 (12:41 +0300)]
drm/panel: use fwnode based lookups for panel followers
Use firmware node based lookups for panel followers, to make the code
independent of OF and device tree, and make it work also for ACPI with
an appropriate _DSD.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Jessica Zhang <jessica.zhang@oss.qualcomm.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Lee Shawn C <shawn.c.lee@intel.com> Tested-by: Lee Shawn C <shawn.c.lee@intel.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20250610094132.3240567-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm/arm/hdlcd: Replace struct simplefb_format with custom type
Map DRM FourCC codes to pixel descriptions with an internal struct
type. Avoid simplefb's struct simplefb_format, which is for parsing
"simple-framebuffer" DT nodes. Drop the unsupported formats with
alpha channel from the list.
The HDLCD drivers uses struct simplefb_format and its default
initializer SIMPLEFB_FORMATS to map DRM_FORMAT_ constants to pixel
descriptions. The simplefb helpers are for parsing "simple-framebuffer"
DT nodes and should be avoided in other context. Therefore replace it
in hdlcd with a custom struct type and pixel descriptions from
PIXEL_FORMAT_ constants.
This change also removes including <linux/platform_data/simplefb.h>,
which includes several unrelated headers, such as <linux/fb.h>.
v2:
- drop unsupported alpha formats (Liviu)
- keep original sorting of formats (Javier)
- use anonymous type for supported_formats
drm/panel: st7701: Add Winstar wf40eswaa6mnn0 panel support
The Winstar wf40eswaa6mnn0 panel is a square 4.0" TFT LCD with a
resolution of 480x480 pixels.
This panel is driven by the Sitronix ST7701 controller and uses a MIPI
DSI interface. The settings are based on the panel's datasheet and the
init sequence provided by Winstar.
It was tested on a Verdin iMX8MP from Toradex with a Carrier Board
providing a MIPI DSI interface.
Add support for sending MIPI DSI command packets from the host to a
peripheral. This is required for panels that need configuration before
they accept video data.
Also for long reads to work properly, set DCS maximum return packet size
to the value of the DMA buffer size.
Linus Torvalds [Sun, 8 Jun 2025 18:33:00 +0000 (11:33 -0700)]
Merge tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
projects / thirdparty / linux.git / log
