Andrii Nakryiko [Wed, 1 Oct 2025 17:13:22 +0000 (10:13 -0700)]
libbpf: make libbpf_errno.c into more generic libbpf_utils.c
Libbpf is missing one convenient place to put common "utils"-like code
that is generic and usable from multiple places. Use libbpf_errno.c as
the base for more generic libbpf_utils.c.
====================
bpf: Fix verifier crash on BPF_NEG with pointer register
This patch fixes a crash in the BPF verifier triggered when the BPF_NEG
operation is applied to a pointer-typed register. The verifier now
checks that the destination register is not a pointer before performing
the operation.
Tested with syzkaller reproducer and new BPF sefltest. Closes: https://syzkaller.appspot.com/bug?extid=d36d5ae81e1b0a53ef58
Changes v4:
Cleaning up, instead of using __is_pointer_value it's further
simplified by checking if regs[insn->dst_reg].type of SCALAR_VALUE
Link:
KaFai Wan [Wed, 1 Oct 2025 19:17:39 +0000 (00:47 +0530)]
selftests/bpf: Add test for BPF_NEG alu on CONST_PTR_TO_MAP
Add a test case for BPF_NEG operation on CONST_PTR_TO_MAP. Tests if
BPF_NEG operation on map_ptr is rejected in unprivileged mode and is a
scalar value and do not trigger Oops in privileged mode.
Brahmajit Das [Wed, 1 Oct 2025 19:17:38 +0000 (00:47 +0530)]
bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer
In check_alu_op(), the verifier currently calls check_reg_arg() and
adjust_scalar_min_max_vals() unconditionally for BPF_NEG operations.
However, if the destination register holds a pointer, these scalar
adjustments are unnecessary and potentially incorrect.
This patch adds a check to skip the adjustment logic when the destination
register contains a pointer.
Reported-by: syzbot+d36d5ae81e1b0a53ef58@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d36d5ae81e1b0a53ef58 Fixes: aced132599b3 ("bpf: Add range tracking for BPF_NEG") Suggested-by: KaFai Wan <kafai.wan@linux.dev> Suggested-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Brahmajit Das <listout@listout.xyz> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20251001191739.2323644-2-listout@listout.xyz Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa [Wed, 1 Oct 2025 12:22:23 +0000 (14:22 +0200)]
selftests/bpf: Fix realloc size in bpf_get_addrs
We will segfault once we call realloc in bpf_get_addrs due to
wrong size argument.
Fixes: 6302bdeb91df ("selftests/bpf: Add a kprobe_multi subtest to use addrs instead of syms") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa [Wed, 1 Oct 2025 12:22:21 +0000 (14:22 +0200)]
selftests/bpf: Fix open-coded gettid syscall in uprobe syscall tests
Commit 0e2fb011a0ba ("selftests/bpf: Clean up open-coded gettid syscall
invocations") addressed the issue that older libc may not have a gettid()
function call wrapper for the associated syscall.
The uprobe syscall tests got in from tip tree, using sys_gettid in there.
Fixes: 0e2fb011a0ba ("selftests/bpf: Clean up open-coded gettid syscall invocations") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Linus Torvalds [Wed, 1 Oct 2025 19:46:26 +0000 (12:46 -0700)]
Merge tag 'backlight-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"This set is comprised of a couple of small but important fixes and a
number of clean-up and refactoring patches. The fixes correct an EPROM
address for the LP8556 and improve memory allocation safety in the LED
backlight driver.
The remainder of the set is made up of refactoring work to the mp3309c
driver and a series of patches to make a number of drivers more
self-contained by including their own dependencies.
Improvements & Fixes:
- Correct the EPROM start address for the LP8556 to align with the
device's datasheet.
- Use devm_kcalloc() in the LED backlight driver for safer array
allocation with overflow protection.
Cleanups & Refactoring
- Drop an unnecessary call to pwm_apply_args() in the mp3309c driver.
- Modernize struct initialization in the mp3309c driver by using a
compound literal instead of memset.
- Make numerous drivers self-contained by including necessary headers
directly rather than relying on transitive includes from the core
backlight header"
* tag 'backlight-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: rt4831: Include <linux/mod_devicetable.h>
backlight: rave-sp: Include <linux/of.h> and <linux/mod_devicetable.h>
backlight: led_bl: Include <linux/of.h>
backlight: ktd2801: Include <linux/mod_devicetable.h>
backlight: jornada720: Include <linux/io.h>
backlight: da9052_bl: Include <linux/mod_devicetable.h>
backlight: as3711_bl: Include <linux/of.h>
backlight: apple_dwi_bl: Include <linux/mod_devicetable.h>
backlight: Include <linux/of.h>
video: backlight: lp855x_bl: Set correct EPROM start for LP8556
backlight: led_bl: Use devm_kcalloc() for array space allocation
backlight: mp3309c: Initialize backlight properties without memset
backlight: mp3309c: Drop pwm_apply_args()
Linus Torvalds [Wed, 1 Oct 2025 19:42:13 +0000 (12:42 -0700)]
Merge tag 'leds-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"This submission is a mix of new features, a number of fixes, some
clean-up/refactoring and a few Device Tree binding updates. The most
significant changes include new device support for the IS31FL3236A and
QNAP's status LEDs, a number of fixes for the Qualcomm flash, LP55xx,
MAX77705 and QNAP MCU drivers, along with some generic LED consumer
binding documentation and unification.
New Support & Features:
- Add support for the IS31FL3236A LED driver, including an optional
22kHz PWM frequency setting.
- Add support for the red and green status LEDs on QNAP MCU devices.
Improvements & Fixes:
- Fix an issue in the MAX77705 driver where an error value was
assigned but not returned.
- Correctly update the torch current clamp setting in the Qualcomm
flash LED driver to prevent unexpected clamping.
- Add a separate register map for the PMI8998 to the Qualcomm flash
LED driver to handle its unique register layout.
- Fix the state numbering for the USB LED in the QNAP MCU driver to
avoid command conflicts.
- Correct the memory programming address calculation for non-paged
devices like the LP5562 in the LP55xx driver.
- Add Device Tree support to the generic led_get() function, allowing
LEDs to be looked up by name.
Cleanups & Refactoring:
- Fix a spelling mistake in the Kconfig help text for the BD2606MVV
driver.
- Use devm_mutex_init() in the IS31FL319x driver to simplify code.
Device Tree Bindings Updates:
- Drop the redundant '-db' suffix from the IS31FL319x binding.
- Introduce generic LED consumer bindings for referencing LEDs via
phandles.
- Unify the 'leds' property across several bindings to use the new
generic consumer binding.
- Convert the AMS AS3645A LED controller binding to the DT schema
format"
* tag 'leds-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
dt-bindings: leds: as3645: Convert to DT schema
leds: led-class: Add Device Tree support to led_get()
dt-bindings: leds: Unify 'leds' property
dt-bindings: leds: Add generic LED consumer documentation
leds: is31fl319x: Use devm_mutex_init()
leds: leds-lp55xx: Use correct address for memory programming
dt-bindings: leds: issi,is31fl319x: Drop 'db' suffix duplicating dtschema
leds: qnap-mcu: Add support for the red and green status LEDs
leds: qnap-mcu: Fix state numbering for USB LED
leds: flash: leds-qcom-flash: Add a separate register map for PMI8998
leds: flash: leds-qcom-flash: Update torch current clamp setting
leds: max77705: Function return instead of variable assignment
leds: Kconfig: Fix spelling mistake "limitiation" -> "limitation"
leds: leds-is31fl32xx: Add support for is31fl3236a
Linus Torvalds [Wed, 1 Oct 2025 19:04:12 +0000 (12:04 -0700)]
Merge tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"This round of updates contains a fair amount of new device support, a
couple of fixes and some refactoring. The most notable additions
include new drivers for Loongson's Security Engine, RNG and TPM, new
drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a
refactoring to use a more modern GPIO API for the VEXPRESS sysreg
driver, the removal of a deprecated IRQ ACK function from the MC13xxx
RTC driver and a new DT binding for the aforementioned TI BQ257xx
charger.
New Support & Features:
- Add a suite of drivers for the Loongson Security Engine, including
the core controller, a Random Number Generator (RNG) and Trusted
Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including
the input driver, MFD cell registration, and a system power-off
handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs,
including the core MFD driver and a power supply driver for the
charger functionality.
Improvements & Fixes:
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS
sysreg driver to prevent potential silent failures.
Cleanups & Refactoring:
- Add a MAINTAINERS entry for the new Loongson Security Engine
drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO
chip API.
Removals:
- Remove the deprecated and unused mc13xxx_irq_ack() function from
the MC13xxx RTC, input and touchscreen drivers.
Device Tree Bindings Updates:
- Add device tree bindings for the TI BQ25703A charger"
* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
dt-bindings: watchdog: Add SMARC-sAM67 support
dt-bindings: mfd: tps6594: Allow gpio-line-names
mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
mfd: 88pm886: Add GPADC cell
mfd: vexpress-sysreg: Use more common syntax for compound literals
mfd: rz-mtu3: Fix MTU5 NFCR register offset
mfd: max77705: Setup the core driver as an interrupt controller
mfd: cs42l43: Remove IRQ masking in suspend
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
mfd: bd71828, bd71815: Prepare for power-supply support
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
dt-bindings: mfd: fsl,mc13xxx: Add buttons node
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
mfd: macsmc: Add "apple,t8103-smc" compatible
...
Linus Torvalds [Wed, 1 Oct 2025 18:54:40 +0000 (11:54 -0700)]
Merge tag 'mmc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Improve RPMB frame handling code
- Add support for a new max-sd-hs-hz DT property to limit frequency
- Add support to manage regulator-under-voltage events
- Support regulator-under-voltage for eMMC to mitigate data
corruptions
- Add mmc_read_tuning() to allow a host to validate its tuning
sequence
- Add some helpers to align checks for CMD23 support
- Read the CCCR register for SDIO over SPI rather than the
unsupported CMD7
MMC host:
- Add COMPILE_TEST option for a couple of drivers
- Convert drivers to use the modern PM macros
- dw_mmc-exynos: Enable support for the Exynos8890 variant
- mmc_spi: Don't use crc ack during multiple block read
- renesas_sdhi: Enable 64-bit polling mode for R-Car gen3 and
RZ/G2L SoCs
- rtsx_usb: Add support for over-current-protection
- sdhci-cadence: Add support for multi-block read gap tuning
- sdhci-msm:
- Add support for tuning for SDR50 mode for SD cards
- Enable support for the Lemans variant
- sdhci-pci: Disable SD card clock before update for a few
Intel platforms
- sdhci-pxav3: Add support for UHS pinctrl settings
- tmio: Add 64-bit read/write support in polling mode
MEMSTICK:
- Convert to use timeouts to prevent indefinite waiting
- rtsx_usb: Add support for over-current-protection"
* tag 'mmc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (77 commits)
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8890
mmc: select REGMAP_MMIO with MMC_LOONGSON2
mmc: add COMPILE_TEST to multiple drivers
mmc: core: Improve RPMB frame handling code
mmc: core: Fix variable shadowing in mmc_route_rpmb_frames()
mmc: core: Parse and use the new max-sd-hs-hz DT property
dt-bindings: mmc: controller: Add max-sd-hs-hz property
mmc: sdhci-msm: Enable tuning for SDR50 mode for SD card
dt-bindings: mmc: sdhci-msm: Document the Lemans compatible
mmc: sh_mmcif: Remove dummy PM resume callback
dt-bindings: mmc: sdhci-pxa: Add minItems to pinctrl-names
mmc: sdio: Drop dev_pm_domain_detach() call
mmc: dw_mmc-rockchip: use modern PM macros
mmc: dw_mmc-pci: use modern PM macros
mmc: dw_mmc-k3: use modern PM macros
mmc: dw_mmc: exynos: use modern PM macros
mmc: via-sdmmc: use modern PM macros
mmc: sdhci-msm: use modern PM macros
mmc: mtk-sd: use modern PM macros
mmc: wmt-sdmmc: use modern PM macros
...
Linus Torvalds [Wed, 1 Oct 2025 18:51:53 +0000 (11:51 -0700)]
Merge tag 'pmdomain-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
- amlogic: Add support for S6/S7/S7D power-domains controller
- imx: Add support for i.MX91 power-domains
- marvell: Add support for PXA1908 power-domains
- mediatek:
- Add support for modem power sequence
- Add support for RTFF Hardware in MT8196/MT6991
- qcom: Align power-domain definitions for rpmpd
- rockchip: Default to use power-domain support
- thead: Create auxiliary device along with a corresponding reset
driver
- ti: Synchronize on/off state with HW-state for ti-sci power-domains
* tag 'pmdomain-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: thead: Fix error pointer vs NULL bug in th1520_pd_reboot_init()
pmdomain: thead: create auxiliary device for rebooting
driver: reset: th1520-aon: add driver for poweroff/reboot via AON FW
pmdomain: mediatek: airoha: convert from round_rate() to determine_rate()
pmdomain: rockchip: enable ROCKCHIP_PM_DOMAINS with ARCH_ROCKCHIP
pmdomain: marvell: Add PXA1908 power domains
dt-bindings: clock: marvell,pxa1908: Add syscon compatible to apmu
pmdomain: ti-sci: Set PD on/off state according to the HW state
pmdomain: amlogic: Add support for S6 S7 S7D power domains controller
dt-bindings: power: add Amlogic S6 S7 S7D power domains
pmdomain: mediatek: Convert all SoCs to new style regmap retrieval
pmdomain: mediatek: Add support for RTFF Hardware in MT8196/MT6991
pmdomain: mediatek: Add support for modem power sequences
pmdomain: mediatek: Move ctl sequences out of power_on/off functions
pmdomain: mediatek: Handle SoCs with inverted SRAM power-down bits
pmdomain: mediatek: Refactor bus protection regmaps retrieval
dt-bindings: power: mediatek: Document access-controllers property
pmdomain: remove unneeded 'fast_io' parameter in regmap_config
pmdomain: imx93-blk-ctrl: mask DSI and PXP PD domain register on i.MX91
pmdomain: imx93-blk-ctrl: use ARRAY_SIZE() instead of hardcode number
...
Linus Torvalds [Wed, 1 Oct 2025 18:46:31 +0000 (11:46 -0700)]
Merge tag 'spi-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's one big core change in this release, Jonas Gorski has
addressed the issues with multiple chip selects which makes things
more robust and stable. Otherwise there's quite a bit of driver work,
as well as some new drivers several existing drivers have had quite a
bit of work done on them.
Possibly the most interesting thing is the VirtIO driver, this is
apparently useful for some automotive applications which want to keep
as small and robust a host system as they can, moving less critical
functionality into guests.
- James Clark has done some substantial updates on the Freescale DSPI
driver, porting in code from the BSP and building onm top of that
to fix some bugs and increase performance
- Jonas Gorski has fixed the issues with handling multple chip
selects, making things more robust and scalable
- Support for higher performance modes in the NXP FSPI driver from
Haibo Chen
- Removal of the obsolete S3C2443 driver, the underlying SoC support
has been removed from the kernel
- Support for Amlogic AL113L2, Atmel SAMA7D65 and SAM9x7 and for
VirtIO controllers"
* tag 'spi-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (74 commits)
spi: ljca: Remove Wentong's e-mail address
spi: rename SPI_CS_CNT_MAX => SPI_DEVICE_CS_CNT_MAX
spi: reduce device chip select limit again
spi: don't check spi_controller::num_chipselect when parsing a dt device
spi: drop check for validity of device chip selects
spi: move unused device CS initialization to __spi_add_device()
spi: keep track of number of chipselects in spi_device
spi: fix return code when spi device has too many chipselects
SPI: Add virtio SPI driver
virtio-spi: Add virtio-spi.h
virtio: Add ID for virtio SPI
spi: rpc-if: Add resume support for RZ/G3E
spi: rpc-if: Drop deprecated SIMPLE_DEV_PM_OPS
spi: spi-qpic-snand: simplify clock handling by using devm_clk_get_enabled()
spi: spi-nxp-fspi: Add OCT-DTR mode support
spi: spi-nxp-fspi: add the support for sample data from DQS pad
spi: spi-nxp-fspi: Add the DDR LUT command support
spi: spi-nxp-fspi: set back to dll override mode when clock rate < 100MHz
spi: spi-nxp-fspi: extract function nxp_fspi_dll_override()
spi: atmel-quadspi: Add support for sama7d65 QSPI
...
Linus Torvalds [Wed, 1 Oct 2025 18:43:54 +0000 (11:43 -0700)]
Merge tag 'regulator-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a very quiet release for regulator, almost all the changes are
new drivers but we do also have some improvements for the Rust
bindings.
- Additional APIs added to the Rust bindings
- Support for Maxim MAX77838, NXP PF0900 and PF5300, Richtek RT5133
and SpacemiT P1"
* tag 'regulator-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (28 commits)
regulator: dt-bindings: qcom,sdm845-refgen-regulator: document more platforms
regulator: Fix MAX77838 selection
regulator: spacemit: support SpacemiT P1 regulators
regulator: max77838: add max77838 regulator driver
dt-bindings: regulator: document max77838 pmic
rust: regulator: add devm_enable and devm_enable_optional
rust: regulator: remove Regulator<Dynamic>
regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding
regulator: pf530x: Add a driver for the NXP PF5300 Regulator
regulator: dt-bindings: nxp,pf530x: Add NXP PF5300/PF5301/PF5302 PMICs
regulator: scmi: Use int type to store negative error codes
regulator: core: Remove redundant ternary operators
rust: regulator: use `to_result` for error handling
regulator: consumer.rst: document bulk operations
regulator: rt5133: Fix IS_ERR() vs NULL bug in rt5133_validate_vendor_info()
regulator: bd718x7: Use kcalloc() instead of kzalloc()
regulator: rt5133: Fix spelling mistake "regualtor" -> "regulator"
regulator: remove unneeded 'fast_io' parameter in regmap_config
regulator: rt5133: Add RT5133 PMIC regulator Support
regulator: dt-bindings: Add Richtek RT5133 Support
...
Linus Torvalds [Wed, 1 Oct 2025 18:41:51 +0000 (11:41 -0700)]
Merge tag 'regmap-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This just contains a few small fixes, there's been no substantial
development on regmap this release cycle"
* tag 'regmap-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: use int type to store negative error codes
regmap: Remove superfluous check for !config in __regmap_init()
regmap: mmio: Add missing MODULE_DESCRIPTION()
Linus Torvalds [Wed, 1 Oct 2025 18:34:12 +0000 (11:34 -0700)]
Merge tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and support for more models in existing
ones.
The generic GPIO API has been reworked and all users converted
which allowed us to move the fields specific to the generic GPIO
implementation out of the high-level struct gpio_chip into its own
structure that wraps the gpio_chip.
Other than that, there's nothing too exciting. Mostly minor tweaks and
fixes all over the place, some refactoring and some small new features
in helper modules.
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and
pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder
API to other in-kernel users (to enable merging of a new pinctrl
driver that uses it)
- convert all remaining drivers to using the modernized generic GPIO
chip API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve
its support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO
drivers that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better
readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled
with COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding"
* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
gpio: mpfs: fix setting gpio direction to output
gpio: generic: move GPIO_GENERIC_ flags to the correct header
gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
gpio: nomadik: fix the debugfs helper stub
MAINTAINERS: Add entry on MAX7360 driver
input: misc: Add support for MAX7360 rotary
input: keyboard: Add support for MAX7360 keypad
gpio: max7360: Add MAX7360 gpio support
gpio: regmap: Allow to provide init_valid_mask callback
gpio: regmap: Allow to allocate regmap-irq device
pwm: max7360: Add MAX7360 PWM support
pinctrl: Add MAX7360 pinctrl driver
mfd: Add max7360 support
dt-bindings: mfd: gpio: Add MAX7360
rtc: Add Nuvoton NCT6694 RTC support
hwmon: Add Nuvoton NCT6694 HWMON support
watchdog: Add Nuvoton NCT6694 WDT support
can: Add Nuvoton NCT6694 CANFD support
i2c: Add Nuvoton NCT6694 I2C support
gpio: Add Nuvoton NCT6694 GPIO support
...
Linus Torvalds [Wed, 1 Oct 2025 17:33:17 +0000 (10:33 -0700)]
Merge tag 'pwm/for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"The core highlights for this cycle are:
- The pca9586 driver was converted to the waveform API
- Waveform drivers automatically provide a gpio chip to make PWMs
usable as GPIOs (The pca9586 driver did that in a driver specific
implementation before)
Otherwise it's the usual mix of fixes and device tree and driver
changes to support new hardware variants"
* tag 'pwm/for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (30 commits)
pwm: cros-ec: Avoid -Wflex-array-member-not-at-end warnings
dt-bindings: pwm: samsung: add exynos8890 compatible
dt-bindings: pwm: apple,s5l-fpwm: Add t6020-fpwm compatible
dt-bindings: pwm: nxp,lpc1850-sct-pwm: Minor whitespace cleanup in example
pwm: pca9586: Convert to waveform API
pwm: pca9685: Drop GPIO support
pwm: pca9685: Make use of register caching in regmap
pwm: pca9685: Use bulk write to atomicially update registers
pwm: pca9685: Don't disable hardware in .free()
pwm: Add the S32G support in the Freescale FTM driver
dt-bindings: pwm: fsl,vf610-ftm-pwm: Add compatible for s32g2 and s32g3
pwm: mediatek: Lock and cache clock rate
pwm: mediatek: Fix various issues in the .apply() callback
pwm: mediatek: Implement .get_state() callback
pwm: mediatek: Initialize clks when the hardware is enabled at probe time
pwm: mediatek: Rework parameters for clk helper function
pwm: mediatek: Introduce and use a few more register defines
pwm: mediatek: Simplify representation of channel offsets
pwm: tiecap: Document behaviour of hardware disable
pwm: Provide a gpio device for waveform drivers
...
- ina238: Major cleanup, and
Add support for INA700
Add support for INA780
- k10temp:
Add device ID for Strix Halo
Add support for AMD Family 1Ah-based models
- lenovo-ec-sensors: Update P8 supprt
- lm75: Add NXP P3T1750 support
- pmbus/adm1275: Add sq24905c support
- pmbus/isl68137: Add support for Renesas RAA228244 and RAA228246
- pmbus/mp5990: Add support for MP5998
- sht21: Add support for SHT20, SHT25
- sl28cpld: Add sa67mcu compatible
Other notable changes:
- core:
Handle locking internally
Introduce 64-bit energy attribute support
- cros_ec: Register into thermal framework, improve PWM control
- lm75: allow interrupt for ti,tmp75
- mlxreg-fan: Add support for new flavour of capability register
- sbtsi_temp: AMD CPU extended temperature range support
- sht21: Add devicetree support
Various other minor improvements and fixes"
* tag 'hwmon-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
dt-bindings: hwmon: (lm75) allow interrupt for ti,tmp75
hwmon: (mlxreg-fan) Add support for new flavour of capability register
hwmon: (mlxreg-fan) Separate methods of fan setting coming from different subsystems
hwmon: (cros_ec) register fans into thermal framework cooling devices
hwmon: (cros_ec) add PWM control over fans
platform/chrome: update pwm fan control host commands
hwmon: add SMARC-sAM67 support
dt-bindings: hwmon: sl28cpld: add sa67mcu compatible
hwmon: (asus-ec-sensors) add TUF GAMING X670E PLUS WIFI
hwmon: (dell-smm) Add support for Dell OptiPlex 7040
hwmon: (dell-smm) Add support for automatic fan mode
hwmon: (gpd-fan) complete Kconfig dependencies
hwmon: (asus-ec-sensors) increase timeout for locking ACPI mutex
hwmon: (asus-ec-sensors) add ROG STRIX X870E-E GAMING WIFI
hwmon: (dell-smm) Move clamping of fan speed out of i8k_set_fan()
hwmon: (dell-smm) Remove Dell Precision 490 custom config data
hwmon: (asus-ec-sensors) add ROG STRIX X670E-E GAMING WIFI
hwmon: (gpd-fan) Fix range check for pwm input
hwmon: (pmbus/mp5990) add support for MP5998
dt-bindings: trivial-devices: add mps,mp5998
...
Linus Torvalds [Wed, 1 Oct 2025 16:16:28 +0000 (09:16 -0700)]
Merge tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready
Improvements:
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning
- Defer probe until parent EC device is ready in cros_ec_keyb
Cleanups:
- Remove redundant and simplify code in cros_ec_chardev
- Centralize cros_ec_device allocation and initialization to remove
duplicate code"
* tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
Input: cros_ec_keyb - Defer probe until parent EC device is registered
platform/chrome: cros_ec: Add a flag to track registration state
platform/chrome: cros_ec: Separate initialization from cros_ec_register()
platform/chrome: Centralize common cros_ec_device initialization
platform/chrome: Centralize cros_ec_device allocation
platform/chrome: wilco_ec: Remove redundant semicolons
platform/chrome: cros_ec: Avoid -Wflex-array-member-not-at-end warning
platform/chrome: cros_ec_chardev: Decouple fops from struct cros_ec_dev
platform/chrome: cros_ec_chardev: Remove redundant struct field
Linus Torvalds [Wed, 1 Oct 2025 15:39:23 +0000 (08:39 -0700)]
Merge tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom
callbacks through a File-type-based and directory-scope-based
API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific
read_poll_timeout() helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs
based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific
pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and
resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor
and class ID numbers
- Implement Display to print actual vendor and class names; Debug
to print the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration
functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes"
* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
rust: pci: display symbolic PCI vendor names
rust: pci: display symbolic PCI class names
rust: pci: fix incorrect platform reference in PCI driver probe doc comment
rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
perf: make pmu_bus const
samples: rust: Add scoped debugfs sample driver
rust: debugfs: Add support for scoped directories
samples: rust: Add debugfs sample driver
rust: debugfs: Add support for callback-based files
rust: debugfs: Add support for writable files
rust: debugfs: Add support for read-only files
rust: debugfs: Add initial support for directories
driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
driver core: auxiliary bus: Drop dev_pm_domain_detach() call
driver core: Fix order of the kernel-doc parameters
driver core: get_dev_from_fwnode(): document potential race
drivers: base: fix "publically"->"publicly"
driver core/PM: Set power.no_callbacks along with power.no_pm
driver core: faux: Set power.no_pm for faux devices
rust: pci: inline several tiny functions
...
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
Update the main TI TWL-family binding to be self-contained and to fix
pre-existing validation errors.
To ensure future patches are bisectable, child nodes whose bindings
are in other patches (audio, keypad, usb, etc.) are now defined using
a flexible 'additionalProperties: true' pattern. This removes hard
dependencies between the MFD and subsystem bindings.
The complete dtbs_check for this binding is clean except for two
warnings originating from pre-existing bugs in the OMAP DTS files,
for which fixes have already been submitted separately [1][2].
Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Uwe Kleine-König <ukleinek@kernel.org> Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com> Reviewed-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee@kernel.org>
Michael Walle [Fri, 12 Sep 2025 12:07:43 +0000 (14:07 +0200)]
dt-bindings: watchdog: Add SMARC-sAM67 support
The SMARC-sAM67 board has an on-board uC which has the same register
interface as the older CPLD implementation on the SMARC-sAL28 board.
Although the MCU emulates the same behavior, be prepared for any quirks
and add a board specific compatible.
Signed-off-by: Michael Walle <mwalle@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee@kernel.org>
The NFCR register for MTU5 is at 0x1a95 offset according to Datasheet
Page 725, Table 16.4. The address of all registers is offset by 0x1200,
making the proper address of MTU5 NFCR register be 0x895.
Cc: stable@vger.kernel.org Fixes: 654c293e1687 ("mfd: Add Renesas RZ/G2L MTU3a core driver") Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20250910175914.12956-1-cosmin-gabriel.tanislav.xa@renesas.com Signed-off-by: Lee Jones <lee@kernel.org>
mfd: max77705: Setup the core driver as an interrupt controller
Current implementation describes only MFD's own topsys interrupts.
However, max77705 has a register which indicates interrupt source, i.e.
it acts as an interrupt controller. There's 4 interrupt sources in
max77705: topsys, charger, fuelgauge, usb type-c manager.
Setup max77705 MFD parent as an interrupt controller. Delete topsys
interrupts because currently unused.
Remove shared interrupt flag, because we're are an interrupt controller
now, and subdevices should request interrupts from us.
Charles Keepax [Wed, 3 Sep 2025 09:45:48 +0000 (10:45 +0100)]
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
As pm_runtime_force_suspend() will force the device state to suspend,
the driver needs to ensure no IRQ handlers are currently running. If not
those handlers may find they are now running on suspended hardware
despite holding a PM runtime reference. disable_irq() will sync any
currently running handlers, so move the IRQ disabling to cover the whole
of the forced suspend state to avoid such race conditions.
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
Since the display is a sub-function of the Loongson-2K BMC, when the
BMC reset, the entire BMC PCIe is disconnected, including the display
which is interrupted.
Quick overview of the entire LS2K BMC reset process:
There are two types of reset methods: soft reset (BMC-initiated reboot
of IPMI reset command) and BMC watchdog reset (watchdog timeout).
First, regardless of the method, an interrupt is generated (PCIe interrupt
for soft reset/GPIO interrupt for watchdog reset);
Second, during the interrupt process, the system enters bmc_reset_work,
clears the bus/IO/mem resources of the LS7A PCI-E bridge, waits for the BMC
reset to begin, then restores the parent device's PCI configuration space,
waits for the BMC reset to complete, and finally restores the BMC PCI
configuration space.
Alexander Kurz [Fri, 29 Aug 2025 20:15:15 +0000 (20:15 +0000)]
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
Convert the txt mc13xxx bindings to DT schema attempting to keep most
information. The nodes codec and touchscreen are not part of the new
schema since it was only briefly mentioned before.
Following the convention, rename led-control to fsl,led-control.
Janne Grunau [Thu, 28 Aug 2025 14:01:37 +0000 (16:01 +0200)]
mfd: macsmc: Add "apple,t8103-smc" compatible
After discussion with the devicetree maintainers we agreed to not extend
lists with the generic compatible "apple,smc" anymore [1]. Use
"apple,t8103-smc" as base compatible as it is the SoC the driver and
bindings were written for.
mfd: core: Increment of_node's refcount before linking it to the platform device
When an MFD device is added, a platform_device is allocated. If this
device is linked to a DT description, the corresponding OF node is linked
to the new platform device but the OF node's refcount isn't incremented.
As of_node_put() is called during the platform device release, it leads
to a refcount underflow.
Call of_node_get() to increment the OF node's refcount when the node is
linked to the newly created platform device.
dt-bindings: mfd: syscon: Document the control-scb syscon on PolarFire SoC
The "control-scb" region, contains the "tvs" temperature and voltage
sensors and the control/status registers for the system controller's
mailbox. The mailbox has a dedicated node, so there's no need for a
child node describing it, looking the syscon up by compatible is
sufficient.
Alex Elder [Mon, 25 Aug 2025 17:20:51 +0000 (12:20 -0500)]
mfd: simple-mfd-i2c: Add SpacemiT P1 support
Enable support for the RTC and regulators found in the SpacemiT P1
PMIC. Support is implemented by the simple I2C MFD driver.
The P1 PMIC is normally implemented with the SpacemiT K1 SoC. This
PMIC provides 6 buck converters and 12 LDO regulators. It also
implements a switch, watchdog timer, real-time clock, and more.
Initially its RTC and regulators are supported.
The Kontron SMARC-sAM67 module features an on-board house keeping uC.
It's designed to be compatible with the older on-board CPLD used on the
SMARC-sAL28 board. To be prepared for any board specific quirks, add a
specific compatible.
Arnd Bergmann [Fri, 8 Aug 2025 15:17:58 +0000 (17:17 +0200)]
mfd: aat2870: Add GPIOLIB_LEGACY dependency
This driver uses the legacy gpiolib interfaces to get gpio
numbers from platform data. There are no in-tree users of
this driver, so nothing defines the platform data.
Add a dependency on GPIOLIB_LEGACY for the moment to avoid the build
failure, and make sure the sound driver does not get built without the
mfd portion either pass that dependency along.
Alternatively, we could remove the mfd driver along with the backlight
and regulator portions.
Arnd Bergmann [Fri, 8 Aug 2025 15:17:57 +0000 (17:17 +0200)]
mfd: si476x: Add GPIOLIB_LEGACY dependency
This driver uses the legacy gpiolib interfaces to get gpio
numbers from platform data:
drivers/mfd/si476x-i2c.c: In function 'si476x_core_start':
drivers/mfd/si476x-i2c.c:133:21: error: implicit declaration of function 'gpio_is_valid'; did you mean 'uuid_is_valid'? [-Werror=implicit-function-declaration]
133 | if (gpio_is_valid(core->gpio_reset))
There are no in-tree users of this driver, so nothing defines
the platform data.
Add a dependency on GPIOLIB_LEGACY for the moment to avoid the build
failure, and make sure the sound driver does not get built without the
mfd portion either pass that dependency along.
Alternatively, we could remove the mfd driver along with the radio and
sound portions.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507231653.UFlH2dMO-lkp@intel.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20250808151822.536879-14-arnd@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
dt-bindings: mfd: Move embedded controllers to own directory
Move several embedded controller bindings (like ChromeOS EC, Gateworks
System Controller and Kontron sl28cpld Board Management) to new
subdirectory "embedded-controller" matching their purpose.
An embedded controller (EC) is a discrete component that contains a
microcontroller (i.e. a small CPU running a small firmware without
operating system) mounted into a larger computer system running
a fully fledged operating system that needs to utilize the embedded
controller as part of its operation.
So far the EC bindings were split between "mfd" and "platform"
directory. MFD name comes from Linux, not hardware, and "platform" is a
bit too generic.
Rename Gateworks GSC and Huawei Gaokun filenames to match compatible, as
preferred for bindings.
Acked-by: Michael Walle <mwalle@kernel.org> # for sl28cpld Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250825081201.9775-2-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
Arnd Bergmann [Fri, 8 Aug 2025 15:17:56 +0000 (17:17 +0200)]
mfd: arizona: Make legacy gpiolib interface optional
The only machine that still uses the old gpio number based interface
is the wlf_cragg_6410 board file. In order to remove the dependency
on the interfaces, add #ifdef blocks here.
dt-bindings: mfd: aspeed-lpc: Add missing "clocks" property on lpc-snoop node
The ASpeed lpc-snoop nodes have a "clocks" property which isn't
documented. It looks like all the LPC child devices have the same clock
source. Perhaps it is the parent device that should have the clock, but
it's too late for that. The driver for lpc-snoop requires a clock to be
present.
Arnd Bergmann [Thu, 7 Aug 2025 07:19:28 +0000 (09:19 +0200)]
mfd: madera: Work around false-positive -Wininitialized warning
clang-21 warns about one uninitialized variable getting dereferenced
in madera_dev_init:
drivers/mfd/madera-core.c:739:10: error: variable 'mfd_devs' is uninitialized when used here [-Werror,-Wuninitialized]
739 | mfd_devs, n_devs,
| ^~~~~~~~
drivers/mfd/madera-core.c:459:33: note: initialize the variable 'mfd_devs' to silence this warning
459 | const struct mfd_cell *mfd_devs;
| ^
| = NULL
The code is actually correct here because n_devs is only nonzero
when mfd_devs is a valid pointer, but this is impossible for the
compiler to see reliably.
Change the logic to check for the pointer as well, to make this easier
for the compiler to follow.
Waqar Hameed [Tue, 5 Aug 2025 09:33:34 +0000 (11:33 +0200)]
mfd: macsmc: Remove error prints for devm_add_action_or_reset()
When `devm_add_action_or_reset()` fails, it is due to a failed memory
allocation and will thus return `-ENOMEM`. `dev_err_probe()` doesn't do
anything when error is `-ENOMEM`. Therefore, remove the useless call to
`dev_err_probe()` when `devm_add_action_or_reset()` fails, and just
return the value instead.
Jens Kehne [Mon, 4 Aug 2025 13:37:54 +0000 (15:37 +0200)]
mfd: da9063: Split chip variant reading in two bus transactions
We observed the initial probe of the da9063 failing in
da9063_get_device_type in about 30% of boots on a Xilinx ZynqMP based
board. The problem originates in da9063_i2c_blockreg_read, which uses
a single bus transaction to turn the register page and then read a
register. On the bus, this should translate to a write to register 0,
followed by a read to the target register, separated by a repeated
start. However, we found that after the write to register 0, the
controller sometimes continues directly with the register address of
the read request, without sending the chip address or a repeated start
in between, which makes the read request invalid.
To fix this, separate turning the page and reading the register into
two separate transactions. This brings the initialization code in line
with the rest of the driver, which uses register maps (which to my
knowledge do not use repeated starts after turning the page). This has
been included in our kernel for several months and was recently
included in a shipped product. For us, it reliably fixes the issue,
and we have not observed any new issues.
While the underlying problem is probably with the i2c controller or
its driver, I still propose a change here in the interest of
robustness: First, I'm not sure this issue can be fixed on the
controller side, since there are other issues related to repeated
start which can't (AR# 60695, AR# 61664). Second, similar problems
might exist with other controllers.
Hans de Goede [Mon, 4 Aug 2025 13:32:40 +0000 (15:32 +0200)]
mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag
Testing has shown that reading multiple registers at once (for 10-bit
ADC values) does not work. Set the use_single_read regmap_config flag
to make regmap split these for us.
This should fix temperature opregion accesses done by
drivers/acpi/pmic/intel_pmic_chtdc_ti.c and is also necessary for
the upcoming drivers for the ADC and battery MFD cells.
Fixes: 6bac0606fdba ("mfd: Add support for Cherry Trail Dollar Cove TI PMIC") Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250804133240.312383-1-hansg@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
Heiko Stuebner [Mon, 4 Aug 2025 13:07:25 +0000 (15:07 +0200)]
mfd: qnap-mcu: Convert to guard(mutex) in qnap_mcu_exec
guard() makes sure that the mutex gets unlocked when the function returns
and thus removes the need for unlock gotos or similar mechanisms and
therefore allows for a simpler function structure.
mfd: kempld: Switch back to earlier ->init() behavior
Commit 9e36775c22c7 ("mfd: kempld: Remove custom DMI matching code")
removes the ability to load the driver if no matching system DMI data
is found. Before this commit the driver could be loaded using
alternative methods such as ACPI or `force_device_id` in the absence
of a matching system DMI entry.
Restore this ability while keeping the refactored
`platform_device_info` table.
Add the TS233 compatible and affiliated driver data to qnap-mcu.
The TS233 is mostly similar to the TS433, except not having any of the
PCIe components, so there are only 2 drives.
The fan pwm-limits from the vendor-configuration also are the same
as for the ts433 variant.
Nuno Sá [Thu, 17 Jul 2025 14:51:34 +0000 (15:51 +0100)]
mfd: adp5585: Drop useless return statement
In adp5585_reset_ev_parse(), when parsing the
adi,reset-pulse-width-us property, we were returning in case it was
found and valid. No point in doing that as we'll be returning anyways
after the exiting the property scope. And it could actually lead to bugs
if new properties happen to added after this one.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-gpio/c85604d9e077511b8aa6ee0786579594cc0103d4.camel@gmail.com/T/#ma25557bd06ccd2531dc9c85ba6be74af781b81aa Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20250717-adp5585-drop-ret-v1-1-2ae65bd780aa@analog.com Signed-off-by: Lee Jones <lee@kernel.org>
mfd: simple-mfd-i2c: Add compatible strings for Layerscape QIXIS FPGA
The QIXIS FPGA found on Layerscape boards such as LX2160AQDS, LS1028AQDS
etc deals with power-on-reset timing, muxing etc. Use the simple-mfd-i2c
as its core driver by adding its compatible string (already found in
some dt files). By using the simple-mfd-i2c driver, any child device
will have access to the i2c regmap created by it.
Linus Torvalds [Wed, 1 Oct 2025 02:18:17 +0000 (19:18 -0700)]
Merge tag 'nolibc-20250928-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
"Only small bugfixes and cleanups"
* tag 'nolibc-20250928-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc:
tools/nolibc: add stdbool.h to nolibc includes
tools/nolibc: make time_t robust if __kernel_old_time_t is missing in host headers
selftests/nolibc: remove outdated comment about construct order
selftests/nolibc: fix EXPECT_NZ macro
tools/nolibc: drop wait4() support
kselftest/arm64: tpidr2: Switch to waitpid() over wait4()
tools/nolibc: fold llseek fallback into lseek()
tools/nolibc: remove __nolibc_enosys() fallback from fork functions
tools/nolibc: remove __nolibc_enosys() fallback from dup2()
tools/nolibc: remove __nolibc_enosys() fallback from *at() functions
tools/nolibc: remove __nolibc_enosys() fallback from time64-related functions
tools/nolibc: use tabs instead of spaces for indentation
tools/nolibc: avoid error in dup2() if old fd equals new fd
selftests/nolibc: always compile the kernel with GCC
selftests/nolibc: don't pass CC to toplevel Makefile
selftests/nolibc: deduplicate invocations of toplevel Makefile
selftests/nolibc: be more specific about variables affecting nolibc-test
tools/nolibc: fix error return value of clock_nanosleep()
Linus Torvalds [Wed, 1 Oct 2025 02:12:49 +0000 (19:12 -0700)]
Merge tag 'rust-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Derive 'Zeroable' for all structs and unions generated by 'bindgen'
where possible and corresponding cleanups. To do so, add the
'pin-init' crate as a dependency to 'bindings' and 'uapi'.
It also includes its first use in the 'cpufreq' module, with more
to come in the next cycle.
- Add warning to the 'rustdoc' target to detect broken 'srctree/'
links and fix existing cases.
- Remove support for unused (since v6.16) host '#[test]'s,
simplifying the 'rusttest' target. Tests should generally run
within KUnit.
'kernel' crate:
- Add 'ptr' module with a new 'Alignment' type, which is always a
power of two and is used to validate that a given value is a valid
alignment and to perform masking and alignment operations:
// Checked at build time.
assert_eq!(Alignment::new::<16>().as_usize(), 16);
// Checked at runtime.
assert_eq!(Alignment::new_checked(15), None);
- Add 'core::mem::{align,size}_of{,_val}' to the prelude, matching
Rust 1.80.0.
- Keep going with the steps on our migration to the standard library
'core::ffi::CStr' type (use 'kernel::{fmt, prelude::fmt!}' and use
upstream method names).
- 'error' module: improve 'Error::from_errno' and 'to_result'
documentation, including examples/tests.
- 'sync' module: extend 'aref' submodule documentation now that it
exists, and more updates to complete the ongoing move of 'ARef' and
'AlwaysRefCounted' to 'sync::aref'.
- 'list' module: add an example/test for 'ListLinksSelfPtr' usage.
- 'alloc' module:
- Implement 'Box::pin_slice()', which constructs a pinned slice of
elements.
- Provide information about the minimum alignment guarantees of
'Kmalloc', 'Vmalloc' and 'KVmalloc'.
- Take minimum alignment guarantees of allocators for
'ForeignOwnable' into account.
- Remove the 'allocator_test' (including 'Cmalloc').
- Add doctest for 'Vec::as_slice()'.
- Constify various methods.
- 'time' module:
- Add methods on 'HrTimer' that can only be called with exclusive
access to an unarmed timer, or from timer callback context.
- Add arithmetic operations to 'Instant' and 'Delta'.
- Add a few convenience and access methods to 'HrTimer' and
'Instant'.
'macros' crate:
- Reduce collections in 'quote!' macro.
And a few other cleanups and improvements"
* tag 'rust-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (58 commits)
gpu: nova-core: use Alignment for alignment-related operations
rust: add `Alignment` type
rust: macros: reduce collections in `quote!` macro
rust: acpi: use `core::ffi::CStr` method names
rust: of: use `core::ffi::CStr` method names
rust: net: use `core::ffi::CStr` method names
rust: miscdevice: use `core::ffi::CStr` method names
rust: kunit: use `core::ffi::CStr` method names
rust: firmware: use `core::ffi::CStr` method names
rust: drm: use `core::ffi::CStr` method names
rust: cpufreq: use `core::ffi::CStr` method names
rust: configfs: use `core::ffi::CStr` method names
rust: auxiliary: use `core::ffi::CStr` method names
drm/panic: use `core::ffi::CStr` method names
rust: device: use `kernel::{fmt,prelude::fmt!}`
rust: sync: use `kernel::{fmt,prelude::fmt!}`
rust: seq_file: use `kernel::{fmt,prelude::fmt!}`
rust: kunit: use `kernel::{fmt,prelude::fmt!}`
rust: file: use `kernel::{fmt,prelude::fmt!}`
rust: device: use `kernel::{fmt,prelude::fmt!}`
...
Linus Torvalds [Wed, 1 Oct 2025 00:58:11 +0000 (17:58 -0700)]
Merge tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc
(Amery Hung)
Applied as a stable branch in bpf-next and net-next trees.
- Support reading skb metadata via bpf_dynptr (Jakub Sitnicki)
Also a stable branch in bpf-next and net-next trees.
- Enforce expected_attach_type for tailcall compatibility (Daniel
Borkmann)
- Replace path-sensitive with path-insensitive live stack analysis in
the verifier (Eduard Zingerman)
This is a significant change in the verification logic. More details,
motivation, long term plans are in the cover letter/merge commit.
- Support signed BPF programs (KP Singh)
This is another major feature that took years to materialize.
Algorithm details are in the cover letter/marge commit
- Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich)
- Add support for may_goto instruction to arm64 JIT (Puranjay Mohan)
- Fix USDT SIB argument handling in libbpf (Jiawei Zhao)
- Allow uprobe-bpf program to change context registers (Jiri Olsa)
- Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and
Puranjay Mohan)
- Allow access to union arguments in tracing programs (Leon Hwang)
- Optimize rcu_read_lock() + migrate_disable() combination where it's
used in BPF subsystem (Menglong Dong)
- Introduce bpf_task_work_schedule*() kfuncs to schedule deferred
execution of BPF callback in the context of a specific task using the
kernel’s task_work infrastructure (Mykyta Yatsenko)
- Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya
Dwivedi)
- Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi)
- Improve the precision of tnum multiplier verifier operation
(Nandakumar Edamana)
- Use tnums to improve is_branch_taken() logic (Paul Chaignon)
- Add support for atomic operations in arena in riscv JIT (Pu Lehui)
- Report arena faults to BPF error stream (Puranjay Mohan)
- Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin
Monnet)
- Add bpf_strcasecmp() kfunc (Rong Tao)
- Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao
Chen)
* tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits)
libbpf: Replace AF_ALG with open coded SHA-256
selftests/bpf: Add stress test for rqspinlock in NMI
selftests/bpf: Add test case for different expected_attach_type
bpf: Enforce expected_attach_type for tailcall compatibility
bpftool: Remove duplicate string.h header
bpf: Remove duplicate crypto/sha2.h header
libbpf: Fix error when st-prefix_ops and ops from differ btf
selftests/bpf: Test changing packet data from kfunc
selftests/bpf: Add stacktrace map lookup_and_delete_elem test case
selftests/bpf: Refactor stacktrace_map case with skeleton
bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE
selftests/bpf: Fix flaky bpf_cookie selftest
selftests/bpf: Test changing packet data from global functions with a kfunc
bpf: Emit struct bpf_xdp_sock type in vmlinux BTF
selftests/bpf: Task_work selftest cleanup fixes
MAINTAINERS: Delete inactive maintainers from AF_XDP
bpf: Mark kfuncs as __noclone
selftests/bpf: Add kprobe multi write ctx attach test
selftests/bpf: Add kprobe write ctx attach test
selftests/bpf: Add uprobe context ip register change test
...
Merge tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Further consolidation of the VDSO infrastructure and the common data
store
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
* tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: Drop vdso_test_clock_getres
selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64()
selftests: vDSO: vdso_test_abi: Test CPUTIME clocks
selftests: vDSO: vdso_test_abi: Use explicit indices for name array
selftests: vDSO: vdso_test_abi: Drop clock availability tests
selftests: vDSO: vdso_test_abi: Use ksft_finished()
selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO
selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper
vdso: Add struct __kernel_old_timeval forward declaration to gettime.h
vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO
vdso: Drop Kconfig GENERIC_VDSO_TIME_NS
vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE
vdso: Drop kconfig GENERIC_COMPAT_VDSO
vdso: Drop kconfig GENERIC_VDSO_32
riscv: vdso: Untangle Kconfig logic
time: Build generic update_vsyscall() only with generic time vDSO
vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs
vdso: Move ENABLE_COMPAT_VDSO from core to arm64
ARM: VDSO: Remove cntvct_ok global variable
vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
Merge tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
- Further preparations for modular clocksource/event drivers
- The usual device tree updates to support new chip variants and the
related changes to thise drivers
- Avoid a 64-bit division in the TEGRA186 driver, which caused a build
fail on 32-bit machines.
- Small fixes, improvements and cleanups all over the place
* tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
dt-bindings: timer: exynos4210-mct: Add compatible for ARTPEC-9 SoC
clocksource/drivers/sh_cmt: Split start/stop of clock source and events
clocksource/drivers/clps711x: Fix resource leaks in error paths
clocksource/drivers/arm_global_timer: Add auto-detection for initial prescaler values
clocksource/drivers/ingenic-sysost: Convert from round_rate() to determine_rate()
clocksource/drivers/timer-tegra186: Don't print superfluous errors
clocksource/drivers/timer-rtl-otto: Simplify documentation
clocksource/drivers/timer-rtl-otto: Do not interfere with interrupts
clocksource/drivers/timer-rtl-otto: Drop set_counter function
clocksource/drivers/timer-rtl-otto: Work around dying timers
clocksource/drivers/timer-ti-dm : Capture functionality for OMAP DM timer
clocksource/drivers/arm_arch_timer_mmio: Add MMIO clocksource
clocksource/drivers/arm_arch_timer_mmio: Switch over to standalone driver
clocksource/drivers/arm_arch_timer: Add standalone MMIO driver
ACPI: GTDT: Generate platform devices for MMIO timers
clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support
dt: bindings: fsl,vf610-pit: Add compatible for s32g2 and s32g3
clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT
clocksource/drivers/vf-pit: Unify the function name for irq ack
clocksource/drivers/vf-pit: Consolidate calls to pit_*_disable/enable
...
Merge tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which only removed it from the core but failed to invoke
the actual device driver shutdown callback. This kept the timer
active, which prevented power savings and caused pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is
a private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide
better information for analysis.
- The usual set of cleanups and enhancements all over the place
* tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix spelling mistakes in comments
clocksource: Print durations for sync check unconditionally
LoongArch: Remove clockevents shutdown call on offlining
tick: Do not set device to detached state in tick_shutdown()
hrtimer: Reorder branches in hrtimer_clockid_to_base()
hrtimer: Remove hrtimer_clock_base:: Get_time
hrtimer: Use hrtimer_cb_get_time() helper
media: pwm-ir-tx: Avoid direct access to hrtimer clockbase
ALSA: hrtimer: Avoid direct access to hrtimer clockbase
lib: test_objpool: Avoid direct access to hrtimer clockbase
sched/core: Avoid direct access to hrtimer clockbase
timers/itimer: Avoid direct access to hrtimer clockbase
posix-timers: Avoid direct access to hrtimer clockbase
jiffies: Remove obsolete SHIFTED_HZ comment
Merge tag 'locking-futex-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex updates from Thomas Gleixner:
"A set of updates for futexes and related selftests:
- Plug the ptrace_may_access() race against a concurrent exec() which
allows to pass the check before the target's process transition in
exec() by taking a read lock on signal->ext_update_lock.
- A large set of cleanups and enhancement to the futex selftests. The
bulk of changes is the conversion to the kselftest harness"
* tag 'locking-futex-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
selftest/futex: Fix spelling mistake "boundarie" -> "boundary"
selftests/futex: Remove logging.h file
selftests/futex: Drop logging.h include from futex_numa
selftests/futex: Refactor futex_numa_mpol with kselftest_harness.h
selftests/futex: Refactor futex_priv_hash with kselftest_harness.h
selftests/futex: Refactor futex_waitv with kselftest_harness.h
selftests/futex: Refactor futex_requeue with kselftest_harness.h
selftests/futex: Refactor futex_wait with kselftest_harness.h
selftests/futex: Refactor futex_wait_private_mapped_file with kselftest_harness.h
selftests/futex: Refactor futex_wait_unitialized_heap with kselftest_harness.h
selftests/futex: Refactor futex_wait_wouldblock with kselftest_harness.h
selftests/futex: Refactor futex_wait_timeout with kselftest_harness.h
selftests/futex: Refactor futex_requeue_pi_signal_restart with kselftest_harness.h
selftests/futex: Refactor futex_requeue_pi_mismatched_ops with kselftest_harness.h
selftests/futex: Refactor futex_requeue_pi with kselftest_harness.h
selftests: kselftest: Create ksft_print_dbg_msg()
futex: Don't leak robust_list pointer on exec race
selftest/futex: Compile also with libnuma < 2.0.16
selftest/futex: Reintroduce "Memory out of range" numa_mpol's subtest
selftest/futex: Make the error check more precise for futex_numa_mpol
...
Merge tag 'smp-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp doc fixlet from Thomas Gleixner:
"An update of the stale smp_call_function_many() documentation to bring
it back in sync with the actual implementation"
* tag 'smp-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Fix up and expand the smp_call_function_many() kerneldoc
Merge tag 'irq-drivers-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq chip driver updates from Thomas Gleixner:
- Use the startup/shutdown callbacks for the PCI/MSI per device
interrupt domains.
This allows us to initialize the RISCV PLIC interrupt hierarchy
correctly and provides a mechanism to decouple the masking and
unmasking during run-time from the expensive PCI mask and unmask when
the underlying MSI provider implementation allows the interrupt to be
masked.
- Initialize the RISCV PLIC MSI interrupt hierarchy correctly so that
the affinity assignment works correctly by switching it over to the
startup/shutdown scheme
- Allow MSI providers to opt out from masking a PCI/MSI interrupt at
the PCI device during operation when the provider can mask the
interrupt at the underlying interrupt chip. This reduces the overhead
in scenarios where disable_irq()/enable_irq() is utilized frequently
by a driver.
The PCI/MSI device level [un]masking is only required on startup and
shutdown in this case.
- Remove the conditional mask/unmask logic in the PCI/MSI layer as this
is now handled unconditionally.
- Replace the hardcoded interrupt routing in the Loongson EIOINTC
interrupt driver to respect the firmware settings and spread them out
to different CPU interrupt inputs so that the demultiplexing handler
only needs to read only a single 64-bit status register instead of
four, which significantly reduces the overhead in VMs as the status
register access causes a VM exit.
- Add support for the new AST2700 SCU interrupt controllers
- Use the legacy interrupt domain setup for the Loongson PCH-LPC
interrupt controller, which resembles the x86 legacy PIC setup and
has the same hardcoded legacy requirements.
- The usual set of cleanups, fixes and improvements all over the place
* tag 'irq-drivers-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/loongson-pch-lpc: Use legacy domain for PCH-LPC IRQ controller
PCI/MSI: Remove the conditional parent [un]mask logic
irqchip/msi-lib: Honor the MSI_FLAG_PCI_MSI_MASK_PARENT flag
irqchip/aspeed-scu-ic: Add support for AST2700 SCU interrupt controllers
dt-bindings: interrupt-controller: aspeed: Add AST2700 SCU IC compatibles
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
irqchip/aspeed-scu-ic: Refactor driver to support variant-based initialization
irqchip/gic-v5: Fix error handling in gicv5_its_irq_domain_alloc()
irqchip/gic-v5: Fix loop in gicv5_its_create_itt_two_level() cleanup path
irqchip/gic-v5: Delete a stray tab
irqchip/sg2042-msi: Set irq type according to DT configuration
riscv: sophgo: dts: sg2044: Change msi irq type to IRQ_TYPE_EDGE_RISING
riscv: sophgo: dts: sg2042: Change msi irq type to IRQ_TYPE_EDGE_RISING
irqchip/gic-v2m: Handle Multiple MSI base IRQ Alignment
irqchip/renesas-rzg2l: Remove dev_err_probe() if error is -ENOMEM
irqchip: Use int type to store negative error codes
irqchip/gic-v5: Remove the redundant ITS cache invalidation
PCI/MSI: Check MSI_FLAG_PCI_MSI_MASK_PARENT in cond_[startup|shutdown]_parent()
irqchip/loongson-eiointc: Add multiple interrupt pin routing support
irqchip/loongson-eiointc: Route interrupt parsed from bios table
...
Merge tag 'irq-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"A set of updates for the interrupt core subsystem:
- Introduce irq_chip_[startup|shutdown]_parent() to prepare for
addressing a few short comings in the PCI/MSI interrupt subsystem.
It allows to utilize the interrupt chip startup/shutdown callbacks
for initializing the interrupt chip hierarchy properly on certain
RISCV implementations and provides a mechanism to reduce the
overhead of masking and unmasking PCI/MSI interrupts during
operation when the underlying MSI provider can mask the interrupt.
The actual usage comes with the interrupt driver pull request.
- Add generic error handling for devm_request_*_irq()
This allows to remove the zoo of random error printk's all over the
usage sites.
- Add a mechanism to warn about long-running interrupt handlers
Long running interrupt handlers can introduce latencies and
tracking them down is a tedious task. The tracking has to be
enabled with a threshold on the kernel command line and utilizes a
static branch to remove the overhead when disabled.
- Update and extend the selftests which validate the CPU hotplug
interrupt migration logic
- Allow dropping the per CPU softirq lock on PREEMPT_RT kernels,
which causes contention and latencies all over the place.
The serialization requirements have been pushed down into the
actual affected usage sites already.
- The usual small cleanups and improvements"
* tag 'irq-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT
softirq: Provide a handshake for canceling tasklets via polling
genirq/test: Ensure CPU 1 is online for hotplug test
genirq/test: Drop CONFIG_GENERIC_IRQ_MIGRATION assumptions
genirq/test: Depend on SPARSE_IRQ
genirq/test: Fail early if interrupt request fails
genirq/test: Factor out fake-virq setup
genirq/test: Select IRQ_DOMAIN
genirq/test: Fix depth tests on architectures with NOREQUEST by default.
genirq: Add support for warning on long-running interrupt handlers
genirq/devres: Add error handling in devm_request_*_irq()
genirq: Add irq_chip_(startup/shutdown)_parent()
genirq: Remove GENERIC_IRQ_LEGACY
Merge tag 'core-rseq-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq updates from Thomas Gleixner:
"Two fixes for RSEQ:
- Protect the event mask modification against the membarrier() IPI as
otherwise the RmW operation is unprotected and events might be lost
- Fix the weak symbol reference in rseq selftests
The current weak RSEQ symbols definitions which were added to allow
static linkage are not working correctly as they effectively
re-define the glibc symbols leading to multiple versions of the
symbols when compiled with -fno-common.
Mark them as 'extern' to convert them from weak symbol definitions
to weak symbol references. That works with static and dynamic
linkage independent of -fcommon and -fno-common"
* tag 'core-rseq-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq/selftests: Use weak symbol reference, not definition, to link with glibc
rseq: Protect event mask against membarrier IPI
Merge tag 'core-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull TIF bit unification updates from Thomas Gleixner:
"A set of changes to consolidate the generic TIF (thread info flag)
bits accross architectures.
All architectures define the same set of generic TIF bits. This makes
it pointlessly hard to add a new generic TIF bit or to change an
existing one.
Provide a generic variant and convert the architectures which utilize
the generic entry code over to use it. The TIF space is divided into
16 generic bits and 16 architecture specific bits, which turned out to
provide enough space on both sides"
* tag 'core-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
LoongArch: Fix bitflag conflict for TIF_FIXADE
riscv: Use generic TIF bits
loongarch: Use generic TIF bits
s390/entry: Remove unused TIF flags
s390: Use generic TIF bits
x86: Use generic TIF bits
asm-generic: Provide generic TIF infrastructure
Merge tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV and apic updates from Borislav Petkov:
- Add functionality to provide runtime firmware updates for the non-x86
parts of an AMD platform like the security processor (ASP) firmware,
modules etc, for example. The intent being that these updates are
interim, live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor
generating unexpected interrupts and injecting them into such guest,
thus interfering with its operation in an unexpected and negative
manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory.
The problem was that the toolchain-generated version of the code was
being executed from a different mapping of memory than what was
"assumed" during code generation, needing an ever-growing pile of
fixups for absolute memory references which are invalid in the early,
1:1 memory mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this [1]
- The usual cleanups and fixes
Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com
* tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
x86/boot: Drop erroneous __init annotation from early_set_pages_state()
crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver
crypto: ccp - Add new HV-Fixed page allocation/free API
x86/sev: Add new dump_rmp parameter to snp_leak_pages() API
x86/startup/sev: Document the CPUID flow in the boot #VC handler
objtool: Ignore __pi___cfi_ prefixed symbols
x86/sev: Zap snp_abort()
x86/apic/savic: Do not use snp_abort()
x86/boot: Get rid of the .head.text section
x86/boot: Move startup code out of __head section
efistub/x86: Remap inittext read-execute when needed
x86/boot: Create a confined code area for startup code
x86/kbuild: Incorporate boot/startup/ via Kbuild makefile
x86/boot: Revert "Reject absolute references in .head.text"
x86/boot: Check startup code for absence of absolute relocations
objtool: Add action to check for absence of absolute relocations
x86/sev: Export startup routines for later use
x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object
x86/sev: Provide PIC aliases for SEV related data objects
x86/boot: Provide PIC aliases for 5-level paging related constants
...
Merge tag 'x86_cache_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
"Add support on AMD for assigning QoS bandwidth counters to resources
(RMIDs) with the ability for those resources to be tracked by the
counters as long as they're assigned to them.
Previously, due to hw limitations, bandwidth counts from untracked
resources would get lost when those resources are not tracked.
Refactor the code and user interfaces to be able to also support
other, similar features on ARM, for example"
* tag 'x86_cache_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
fs/resctrl: Fix counter auto-assignment on mkdir with mbm_event enabled
MAINTAINERS: resctrl: Add myself as reviewer
x86/resctrl: Configure mbm_event mode if supported
fs/resctrl: Introduce the interface to switch between monitor modes
fs/resctrl: Disable BMEC event configuration when mbm_event mode is enabled
fs/resctrl: Introduce the interface to modify assignments in a group
fs/resctrl: Introduce mbm_L3_assignments to list assignments in a group
fs/resctrl: Auto assign counters on mkdir and clean up on group removal
fs/resctrl: Introduce mbm_assign_on_mkdir to enable assignments on mkdir
fs/resctrl: Provide interface to update the event configurations
fs/resctrl: Add event configuration directory under info/L3_MON/
fs/resctrl: Support counter read/reset with mbm_event assignment mode
x86/resctrl: Implement resctrl_arch_reset_cntr() and resctrl_arch_cntr_read()
x86/resctrl: Refactor resctrl_arch_rmid_read()
fs/resctrl: Introduce counter ID read, reset calls in mbm_event mode
fs/resctrl: Pass struct rdtgroup instead of individual members
fs/resctrl: Add the functionality to unassign MBM events
fs/resctrl: Add the functionality to assign MBM events
x86,fs/resctrl: Implement resctrl_arch_config_cntr() to assign a counter with ABMC
fs/resctrl: Introduce event configuration field in struct mon_evt
...
Merge tag 'x86_cpu_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Make UMIP instruction detection more robust
- Correct and cleanup AMD CPU topology detection; document the relevant
CPUID leaves topology parsing precedence on AMD
- Add support for running the kernel as guest on FreeBSD's Bhyve
hypervisor
- Cleanups and improvements
* tag 'x86_cpu_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/umip: Fix decoding of register forms of 0F 01 (SGDT and SIDT aliases)
x86/umip: Check that the instruction opcode is at least two bytes
Documentation/x86/topology: Detail CPUID leaves used for topology enumeration
x86/cpu/topology: Define AMD64_CPUID_EXT_FEAT MSR
x86/cpu/topology: Check for X86_FEATURE_XTOPOLOGY instead of passing has_xtopology
x86/cpu/cacheinfo: Simplify cacheinfo_amd_init_llc_id() using _cpuid4_info
x86/cpu: Rename and move CPU model entry for Diamond Rapids
x86/cpu: Detect FreeBSD Bhyve hypervisor
Merge tag 'x86_bugs_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mitigation updates from Borislav Petkov:
- Add VMSCAPE to the attack vector controls infrastructure
- A bunch of the usual cleanups and fixlets, some of them resulting
from fuzzing the different mitigation options
* tag 'x86_bugs_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Report correct retbleed mitigation status
x86/bugs: Fix reporting of LFENCE retpoline
x86/bugs: Fix spectre_v2 forcing
x86/bugs: Remove uses of cpu_mitigations_off()
x86/bugs: Simplify SSB cmdline parsing
x86/bugs: Use early_param() for spectre_v2
x86/bugs: Use early_param() for spectre_v2_user
x86/bugs: Add attack vector controls for VMSCAPE
x86/its: Move ITS indirect branch thunks to .text..__x86.indirect_thunk
Merge tag 'ras_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Unify and refactor the MCA arch side and better separate code
- Cleanup and simplify the AMD RAS side, unify code, drop unused stuff
* tag 'ras_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Add a clear_bank() helper
x86/mce: Move machine_check_poll() status checks to helper functions
x86/mce: Separate global and per-CPU quirks
x86/mce: Do 'UNKNOWN' vendor check early
x86/mce: Define BSP-only SMCA init
x86/mce: Define BSP-only init
x86/mce: Set CR4.MCE last during init
x86/mce: Remove __mcheck_cpu_init_early()
x86/mce: Cleanup bank processing on init
x86/mce/amd: Put list_head in threshold_bank
x86/mce/amd: Remove smca_banks_map
x86/mce/amd: Remove return value for mce_threshold_{create,remove}_device()
x86/mce/amd: Rename threshold restart function
Merge tag 'x86_build_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Borislav Petkov:
- Remove and simplify a bunch of cc-option and compiler version checks
in the build machinery now that the minimal version of both compilers
supports them
* tag 'x86_build_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Clean up LLVM version checks in IBT configurations
x86/build: Remove cc-option from -mskip-rax-setup
x86/build: Remove cc-option from -mno-fp-ret-in-387
x86/build: Clean up stack alignment flags in CC_FLAGS_FPU
x86/build: Remove cc-option from stack alignment flags
x86/build: Remove cc-option for GCC retpoline flags
Merge tag 'x86_misc_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 instruction decoder update from Borislav Petkov:
- Add instruction decoding support for the XOP-prefixed instruction set
present on the AMD Bulldozer uarch
[ These instructions don't normally happen, but a X86_NATIVE_CPU build
on a bulldozer host can make the compiler then use these unusual
instruction encodings ]
* tag 'x86_misc_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Add XOP prefix instructions decoder support
Merge tag 'edac_updates_for_v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for new AMD family 0x1a models to amd64_edac
- Add an EDAC driver for the AMD VersalNET memory controller which
reports hw errors from different IP blocks in the fabric using an
IPC-type transport
- Drop the silly static number of memory controllers in the Intel EDAC
drivers (skx, i10nm) in favor of a flexible array so that former
doesn't need to be increased with every new generation which adds
more memory controllers; along with a proper refactoring
- Add support for two Alder Lake-S SOCs to ie31200_edac
- Add an EDAC driver for ADM Cortex A72 cores, and specifically for
reporting L1 and L2 cache errors
- Last but not least, the usual fixes, cleanups and improvements all
over the subsystem
* tag 'edac_updates_for_v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (23 commits)
EDAC/versalnet: Return the correct error in mc_probe()
EDAC/mc_sysfs: Increase legacy channel support to 16
EDAC/amd64: Add support for AMD family 1Ah-based newer models
EDAC: Add a driver for the AMD Versal NET DDR controller
dt-bindings: memory-controllers: Add support for Versal NET EDAC
RAS: Export log_non_standard_event() to drivers
cdx: Export Symbols for MCDI RPC and Initialization
cdx: Split mcdi.h and reorganize headers
EDAC/skx_common: Use topology_physical_package_id() instead of open coding
EDAC: Fix wrong executable file modes for C source files
EDAC/altera: Use dev_fwnode()
EDAC/skx_common: Remove unused *NUM*_IMC macros
EDAC/i10nm: Reallocate skx_dev list if preconfigured cnt != runtime cnt
EDAC/skx_common: Remove redundant upper bound check for res->imc
EDAC/skx_common: Make skx_dev->imc[] a flexible array
EDAC/skx_common: Swap memory controller index mapping
EDAC/skx_common: Move mc_mapping to be a field inside struct skx_imc
EDAC/{skx_common,skx}: Use configuration data, not global macros
EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller
EDAC/ie31200: Add two more Intel Alder Lake-S SoCs for EDAC support
...
projects / thirdparty / kernel / stable.git / log
