Paolo Bonzini [Tue, 2 Jan 2024 14:36:51 +0000 (15:36 +0100)]
target/i386: introduce function to query MMU indices
Remove knowledge of specific MMU indexes (other than MMU_NESTED_IDX and
MMU_PHYS_IDX) from mmu_translate(). This will make it possible to split
32-bit and 64-bit MMU indexes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 5f97afe2543f09160a8d123ab6e2e8c6d98fa9ce) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup in target/i386/cpu.h due to other changes in that area)
Kevin Wolf [Thu, 25 Jan 2024 16:58:03 +0000 (17:58 +0100)]
tests/unit: Bump test-replication timeout to 60 seconds
We're seeing timeouts for this test on CI runs (specifically for
ubuntu-20.04-s390x-all). It doesn't fail consistently, but even the
successful runs take about 27 or 28 seconds, which is not very far from
the 30 seconds timeout.
Bump the timeout a bit to make failure less likely even on this CI host.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240125165803.48373-1-kwolf@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 63b18312d14ac984acaf13c7c55d9baa2d61496e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Fri, 15 Dec 2023 07:03:55 +0000 (08:03 +0100)]
tests/unit: Bump test-crypto-block test timeout to 5 minutes
When running the tests in slow mode on a very loaded system and with
--enable-debug, the test-crypto-block can take longer than 4 minutes.
Bump the timeout to 5 minutes to make sure that it also passes in
such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-15-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
(cherry picked from commit e1b363e328d559cd5f86d3d1d7b84d0154e153d3) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Fri, 15 Dec 2023 07:03:54 +0000 (08:03 +0100)]
tests/unit: Bump test-aio-multithread test timeout to 2 minutes
When running the tests in slow mode on a very loaded system and with
--enable-debug, the test-aio-multithread can take longer than 1 minute.
Bump the timeout to two minutes to make sure that it also passes in
such situations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-14-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
(cherry picked from commit c45f8f1aef35730a2dcf3cabe296ac12965db43d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kevin Wolf [Thu, 14 Mar 2024 16:58:25 +0000 (17:58 +0100)]
iotests: Add test for reset/AioContext switches with NBD exports
This replicates the scenario in which the bug was reported.
Unfortunately this relies on actually executing a guest (so that the
firmware initialises the virtio-blk device and moves it to its
configured iothread), so this can't make use of the qtest accelerator
like most other test cases. I tried to find a different easy way to
trigger the bug, but couldn't find one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240314165825.40261-3-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit e8fce34eccf68a32f4ecf2c6f121ff2ac383d6bf) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kevin Wolf [Thu, 14 Mar 2024 16:58:24 +0000 (17:58 +0100)]
nbd/server: Fix race in draining the export
When draining an NBD export, nbd_drained_begin() first sets
client->quiescing so that nbd_client_receive_next_request() won't start
any new request coroutines. Then nbd_drained_poll() tries to makes sure
that we wait for any existing request coroutines by checking that
client->nb_requests has become 0.
However, there is a small window between creating a new request
coroutine and increasing client->nb_requests. If a coroutine is in this
state, it won't be waited for and drain returns too early.
In the context of switching to a different AioContext, this means that
blk_aio_attached() will see client->recv_coroutine != NULL and fail its
assertion.
Fix this by increasing client->nb_requests immediately when starting the
coroutine. Doing this after the checks if we should create a new
coroutine is okay because client->lock is held.
Cc: qemu-stable@nongnu.org Fixes: fd6afc501a01 ("nbd/server: Use drained block ops to quiesce the server") Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240314165825.40261-2-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 9c707525cbb1dd1e56876e45c70c0c08f2876d41) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Hajnoczi [Thu, 21 Dec 2023 19:24:52 +0000 (14:24 -0500)]
nbd/server: introduce NBDClient->lock to protect fields
NBDClient has a number of fields that are accessed by both the export
AioContext and the main loop thread. When the AioContext lock is removed
these fields will need another form of protection.
Add NBDClient->lock and protect fields that are accessed by both
threads. Also add assertions where possible and otherwise add doc
comments stating assumptions about which thread and lock holding.
Note this patch moves the client->recv_coroutine assertion from
nbd_co_receive_request() to nbd_trip() where client->lock is held.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231221192452.1785567-7-stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 7075d235114b40b30524cf1c5b61906c0bbf5f4d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Hajnoczi [Thu, 21 Dec 2023 19:24:51 +0000 (14:24 -0500)]
nbd/server: only traverse NBDExport->clients from main loop thread
The NBD clients list is currently accessed from both the export
AioContext and the main loop thread. When the AioContext lock is removed
there will be nothing protecting the clients list.
Adding a lock around the clients list is tricky because NBDClient
structs are refcounted and may be freed from the export AioContext or
the main loop thread. nbd_export_request_shutdown() -> client_close() ->
nbd_client_put() is also tricky because the list lock would be held
while indirectly dropping references to NDBClients.
A simpler approach is to only allow nbd_client_put() and client_close()
calls from the main loop thread. Then the NBD clients list is only
accessed from the main loop thread and no fancy locking is needed.
nbd_trip() just needs to reschedule itself in the main loop AioContext
before calling nbd_client_put() and client_close(). This costs more CPU
cycles per NBD request so add nbd_client_put_nonzero() to optimize the
common case where more references to NBDClient remain.
Note that nbd_client_get() can still be called from either thread, so
make NBDClient->refcount atomic.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231221192452.1785567-6-stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit f816310d0c32c8482e56807ea0f9faa8d1b5f696) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kevin Wolf [Wed, 13 Mar 2024 15:30:00 +0000 (16:30 +0100)]
mirror: Don't call job_pause_point() under graph lock
Calling job_pause_point() while holding the graph reader lock
potentially results in a deadlock: bdrv_graph_wrlock() first drains
everything, including the mirror job, which pauses it. The job is only
unpaused at the end of the drain section, which is when the graph writer
lock has been successfully taken. However, if the job happens to be
paused at a pause point where it still holds the reader lock, the writer
lock can't be taken as long as the job is still paused.
Mark job_pause_point() as GRAPH_UNLOCKED and fix mirror accordingly.
Cc: qemu-stable@nongnu.org Buglink: https://issues.redhat.com/browse/RHEL-28125 Fixes: 004915a96a7a ("block: Protect bs->backing with graph_lock") Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240313153000.33121-1-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit ae5a40e8581185654a667fbbf7e4adbc2a2a3e45) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cédric Le Goater [Tue, 12 Mar 2024 12:04:31 +0000 (13:04 +0100)]
migration: Skip only empty block devices
The block .save_setup() handler calls a helper routine
init_blk_migration() which builds a list of block devices to take into
account for migration. When one device is found to be empty (sectors
== 0), the loop exits and all the remaining devices are ignored. This
is a regression introduced when bdrv_iterate() was removed.
Change that by skipping only empty devices.
Cc: Markus Armbruster <armbru@redhat.com> Cc: qemu-stable <qemu-stable@nongnu.org> Suggested-by: Kevin Wolf <kwolf@redhat.com> Fixes: fea68bb6e9fa ("block: Eliminate bdrv_iterate(), use bdrv_next()") Signed-off-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Link: https://lore.kernel.org/r/20240312120431.550054-1-clg@redhat.com
[peterx: fix "Suggested-by:"] Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit 2e128776dc56f502c2ee41750afe83938f389528) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The payload size returned by command VIRTIO_SND_R_PCM_INFO is
wrong. The code in process_cmd() assumes that all commands
return only a virtio_snd_hdr payload, but some commands like
VIRTIO_SND_R_PCM_INFO may return an additional payload.
Add a zero initialized payload_size variable to struct
virtio_snd_ctrl_command to allow for additional payloads.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20240218083351.8524-1-vr_qemu@t-online.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 633487df8d303b37a88584d5a57a39dbcd91c7bf) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
and appropriate hmat_lb entries the initiator list is correctly
computed and writen to HMAT as 0,2 but then the LB data is accessed
using the node id (here 2), landing outside the entry_list array.
Stash the reverse lookup when writing the initiator list and use
it to get the correct array index index.
Fixes: 4586a2cb83 ("hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s)") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240307160326.31570-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 74e2845c5f95b0c139c79233ddb65bb17f2dd679) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Akihiko Odaki [Wed, 28 Feb 2024 11:33:13 +0000 (20:33 +0900)]
pcie_sriov: Validate NumVFs
The guest may write NumVFs greater than TotalVFs and that can lead
to buffer overflow in VF implementations.
Cc: qemu-stable@nongnu.org Fixes: CVE-2024-26327 Fixes: 7c0fa8dff811 ("pcie: Add support for Single Root I/O Virtualization (SR/IOV)") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-2-282660281e60@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
(cherry picked from commit 6081b4243cd64dff1b2cf5b0c215c71e9d7e753b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Akihiko Odaki [Wed, 28 Feb 2024 11:33:12 +0000 (20:33 +0900)]
hw/nvme: Use pcie_sriov_num_vfs()
nvme_sriov_pre_write_ctrl() used to directly inspect SR-IOV
configurations to know the number of VFs being disabled due to SR-IOV
configuration writes, but the logic was flawed and resulted in
out-of-bound memory access.
It assumed PCI_SRIOV_NUM_VF always has the number of currently enabled
VFs, but it actually doesn't in the following cases:
- PCI_SRIOV_NUM_VF has been set but PCI_SRIOV_CTRL_VFE has never been.
- PCI_SRIOV_NUM_VF was written after PCI_SRIOV_CTRL_VFE was set.
- VFs were only partially enabled because of realization failure.
It is a responsibility of pcie_sriov to interpret SR-IOV configurations
and pcie_sriov does it correctly, so use pcie_sriov_num_vfs(), which it
provides, to get the number of enabled VFs before and after SR-IOV
configuration writes.
Cc: qemu-stable@nongnu.org Fixes: CVE-2024-26328 Fixes: 11871f53ef8e ("hw/nvme: Add support for the Virtualization Management command") Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-1-282660281e60@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 91bb64a8d2014fda33a81fcf0fce37340f0d3b0c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Klaus Jensen [Sun, 10 Mar 2024 10:43:55 +0000 (11:43 +0100)]
hw/nvme: add machine compatibility parameter to enable msix exclusive bar
Commit 1901b4967c3f ("hw/block/nvme: move msix table and pba to BAR 0")
moved the MSI-X table and PBA to BAR 0 to make room for enabling CMR and
PMR at the same time. As reported by Julien Grall in #2184, this breaks
migration through system hibernation.
Add a machine compatibility parameter and set it on machines pre 6.0 to
enable the old behavior automatically, restoring the hibernation
migration support.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2184 Fixes: 1901b4967c3f ("hw/block/nvme: move msix table and pba to BAR 0") Reported-by: Julien Grall julien@xen.org Tested-by: Julien Grall julien@xen.org Reviewed-by: Jesper Wendel Devantier <foss@defmacro.it> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit fa905f65c5549703279f68c253914799b10ada47) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Klaus Jensen [Thu, 8 Feb 2024 12:22:48 +0000 (13:22 +0100)]
hw/nvme: fix invalid check on mcl
The number of logical blocks within a source range is converted into a
1s based number at the time of parsing. However, when verifying the copy
length we add one again, causing the check against MCL to fail in error.
Cc: qemu-stable@nongnu.org Fixes: 381ab99d8587 ("hw/nvme: check maximum copy length (MCL) for COPY") Reviewed-by: Minwoo Im <minwoo.im@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 8c78015a55d84c016da6d5e41b6b5f618ecb25ab) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Minwoo Im [Tue, 9 Jan 2024 02:29:53 +0000 (11:29 +0900)]
hw/nvme: separate 'serial' property for VFs
Currently, when a VF is created, it uses the 'params' object of the PF
as it is. In other words, the 'params.serial' string memory area is also
shared. In this situation, if the VF is removed from the system, the
PF's 'params.serial' object is released with object_finalize() followed
by object_property_del_all() which release the memory for 'serial'
property. If that happens, the next VF created will inherit a serial
from a corrupted memory area.
If this happens, an error will occur when comparing subsys->serial and
n->params.serial in the nvme_subsys_register_ctrl() function.
Cc: qemu-stable@nongnu.org Fixes: 44c2c09488db ("hw/nvme: Add support for SR-IOV") Signed-off-by: Minwoo Im <minwoo.im@samsung.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 4f0a4a3d5854824e5c5eccf353d4a1f4f749a29d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peng Fan [Wed, 24 Jan 2024 02:14:50 +0000 (10:14 +0800)]
xen: Drop out of coroutine context xen_invalidate_map_cache_entry
xen_invalidate_map_cache_entry is not expected to run in a
coroutine. Without this, there is crash:
signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44
threadid=<optimized out>) at pthread_kill.c:78
at /usr/src/debug/glibc/2.38+git-r0/sysdeps/posix/raise.c:26
fmt=0xffff9e1ca8a8 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n",
assertion=assertion@entry=0xaaaae0d25740 "!qemu_in_coroutine()",
file=file@entry=0xaaaae0d301a8 "../qemu-xen-dir-remote/block/graph-lock.c", line=line@entry=260,
function=function@entry=0xaaaae0e522c0 <__PRETTY_FUNCTION__.3> "bdrv_graph_rdlock_main_loop") at assert.c:92
assertion=assertion@entry=0xaaaae0d25740 "!qemu_in_coroutine()",
file=file@entry=0xaaaae0d301a8 "../qemu-xen-dir-remote/block/graph-lock.c", line=line@entry=260,
function=function@entry=0xaaaae0e522c0 <__PRETTY_FUNCTION__.3> "bdrv_graph_rdlock_main_loop") at assert.c:101
at ../qemu-xen-dir-remote/block/graph-lock.c:260
at /home/Freenix/work/sw-stash/xen/upstream/tools/qemu-xen-dir-remote/include/block/graph-lock.h:259
host=host@entry=0xffff742c8000, size=size@entry=2097152)
at ../qemu-xen-dir-remote/block/io.c:3362
host=0xffff742c8000, size=2097152)
at ../qemu-xen-dir-remote/block/block-backend.c:2859
host=<optimized out>, size=<optimized out>, max_size=<optimized out>)
at ../qemu-xen-dir-remote/block/block-ram-registrar.c:33
size=2097152, max_size=2097152)
at ../qemu-xen-dir-remote/hw/core/numa.c:883
buffer=buffer@entry=0xffff743c5000 "")
at ../qemu-xen-dir-remote/hw/xen/xen-mapcache.c:475
buffer=buffer@entry=0xffff743c5000 "")
at ../qemu-xen-dir-remote/hw/xen/xen-mapcache.c:487
as=as@entry=0xaaaae1ca3ae8 <address_space_memory>, buffer=0xffff743c5000,
len=<optimized out>, is_write=is_write@entry=true,
access_len=access_len@entry=32768)
at ../qemu-xen-dir-remote/system/physmem.c:3199
dir=DMA_DIRECTION_FROM_DEVICE, len=<optimized out>,
buffer=<optimized out>, as=0xaaaae1ca3ae8 <address_space_memory>)
at /home/Freenix/work/sw-stash/xen/upstream/tools/qemu-xen-dir-remote/include/sysemu/dma.h:236
elem=elem@entry=0xaaaaf620aa30, len=len@entry=32769)
at ../qemu-xen-dir-remote/hw/virtio/virtio.c:758
elem=elem@entry=0xaaaaf620aa30, len=len@entry=32769, idx=idx@entry=0)
at ../qemu-xen-dir-remote/hw/virtio/virtio.c:919
elem=elem@entry=0xaaaaf620aa30, len=32769)
at ../qemu-xen-dir-remote/hw/virtio/virtio.c:994
req=req@entry=0xaaaaf620aa30, status=status@entry=0 '\000')
at ../qemu-xen-dir-remote/hw/block/virtio-blk.c:67
ret=0) at ../qemu-xen-dir-remote/hw/block/virtio-blk.c:136
at ../qemu-xen-dir-remote/block/block-backend.c:1559
--Type <RET> for more, q to quit, c to continue without paging--
at ../qemu-xen-dir-remote/block/block-backend.c:1614
i1=<optimized out>) at ../qemu-xen-dir-remote/util/coroutine-ucontext.c:177
at ../sysdeps/unix/sysv/linux/aarch64/setcontext.S:123
Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-Id: <20240124021450.21656-1-peng.fan@oss.nxp.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
(cherry picked from commit 9253d83062268209533df4b29859e5b51a2dc324) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Nick Briggs [Thu, 1 Feb 2024 18:11:17 +0000 (10:11 -0800)]
Avoid unaligned fetch in ladr_match()
There is no guarantee that the PCNetState is allocated such that
csr[8] is allocated on an 8-byte boundary. Since not all hosts are
capable of unaligned fetches the 16-bit elements need to be fetched
individually to avoid a potential fault. Closes issue #2143
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2143 Signed-off-by: Nick Briggs <nicholas.h.briggs@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 6a5287ce80470bb8df95901d73ee779a64e70c3a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Laurent Vivier [Wed, 24 Jan 2024 10:40:06 +0000 (11:40 +0100)]
e1000e: fix link state on resume
On resume e1000e_vm_state_change() always calls e1000e_autoneg_resume()
that sets link_down to false, and thus activates the link even
if we have disabled it.
The problem can be reproduced starting qemu in paused state (-S) and
then set the link to down. When we resume the machine the link appears
to be up.
Laurent Vivier [Wed, 24 Jan 2024 10:29:03 +0000 (11:29 +0100)]
igb: fix link state on resume
On resume igb_vm_state_change() always calls igb_autoneg_resume()
that sets link_down to false, and thus activates the link even
if we have disabled it.
The problem can be reproduced starting qemu in paused state (-S) and
then set the link to down. When we resume the machine the link appears
to be up.
Yu Zhang [Wed, 6 Mar 2024 08:06:54 +0000 (09:06 +0100)]
migration/rdma: Fix a memory issue for migration
In commit 3fa9642ff7 change was made to convert the RDMA backend to
accept MigrateAddress struct. However, the assignment of "host" leads
to data corruption on the target host and the failure of migration.
isock->host = rdma->host;
By allocating the memory explicitly for it with g_strdup_printf(), the
issue is fixed and the migration doesn't fail any more.
Fixes: 3fa9642ff7 ("migration: convert rdma backend to accept MigrateAddress") Cc: qemu-stable <qemu-stable@nongnu.org> Cc: Li Zhijian <lizhijian@fujitsu.com> Link: https://lore.kernel.org/r/CAHEcVy4L_D6tuhJ8h=xLR4WaPaprJE3nnxZAEyUnoTrxQ6CF5w@mail.gmail.com Signed-off-by: Yu Zhang <yu.zhang@ionos.com>
[peterx: use g_strdup() instead of g_strdup_printf(), per Zhijian] Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit 69f7b00d057f8832a841a53d5ee31eb303157398) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Michael Tokarev [Mon, 4 Mar 2024 18:46:39 +0000 (21:46 +0300)]
make-release: switch to .xz format by default
For a long time, we provide two compression formats in the
download area, .bz2 and .xz. There's absolutely no reason
to provide two in parallel, .xz compresses better, and all
the links we use points to .xz. Downstream distributions
mostly use .xz too.
For the release maintenance providing two formats is definitely
extra burden too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 9bc9e95119445d7a430b0fc8b7daf22a3612bbd3)
Sven Schnelle [Thu, 29 Feb 2024 20:44:07 +0000 (21:44 +0100)]
hw/scsi/lsi53c895a: add timer to scripts processing
HP-UX 10.20 seems to make the lsi53c895a spinning on a memory location
under certain circumstances. As the SCSI controller and CPU are not
running at the same time this loop will never finish. After some
time, the check loop interrupts with a unexpected device disconnect.
This works, but is slow because the kernel resets the scsi controller.
Instead of signaling UDC, start a timer and exit the loop. Until the
timer fires, the CPU can process instructions which might changes the
memory location.
The limit of instructions is also reduced because scripts running on
the SCSI processor are usually very short. This keeps the time until
the loop is exit short.
Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-ID: <20240229204407.1699260-1-svens@stackframe.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 9876359990dd4c8a48de65cf5e1c3d13e96a7f4e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Sven Schnelle [Sat, 2 Mar 2024 21:44:53 +0000 (22:44 +0100)]
hw/scsi/lsi53c895a: stop script on phase mismatch
Netbsd isn't happy with qemu lsi53c895a emulation:
cd0(esiop0:0:2:0): command with tag id 0 reset
esiop0: autoconfiguration error: phase mismatch without command
esiop0: autoconfiguration error: unhandled scsi interrupt, sist=0x80 sstat1=0x0 DSA=0x23a64b1 DSP=0x50
This is because lsi_bad_phase() triggers a phase mismatch, which
stops SCRIPT processing. However, after returning to
lsi_command_complete(), SCRIPT is restarted with lsi_resume_script().
Fix this by adding a return value to lsi_bad_phase(), and only resume
script processing when lsi_bad_phase() didn't trigger a host interrupt.
Signed-off-by: Sven Schnelle <svens@stackframe.org> Tested-by: Helge Deller <deller@gmx.de>
Message-ID: <20240302214453.2071388-1-svens@stackframe.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a9198b3132d81a6bfc9fdbf6f3d3a514c2864674) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
system/qdev-monitor: move drain_call_rcu call under if (!dev) in qmp_device_add()
Original goal of addition of drain_call_rcu to qmp_device_add was to cover
the failure case of qdev_device_add. It seems call of drain_call_rcu was
misplaced in 7bed89958bfbf40df what led to waiting for pending RCU callbacks
under happy path too. What led to overall performance degradation of
qmp_device_add.
In this patch call of drain_call_rcu moved under handling of failure of
qdev_device_add.
Signed-off-by: Dmitrii Gavrilov <ds-gavr@yandex-team.ru>
Message-ID: <20231103105602.90475-1-ds-gavr@yandex-team.ru> Fixes: 7bed89958bf ("device_core: use drain_call_rcu in in qmp_device_add", 2020-10-12) Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 012b170173bcaa14b9bc26209e0813311ac78489) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Fri, 23 Feb 2024 16:13:00 +0000 (16:13 +0000)]
hw/rtc/sun4v-rtc: Relicense to GPLv2-or-later
The sun4v RTC device model added under commit a0e893039cf2ce0 in 2016
was unfortunately added with a license of GPL-v3-or-later, which is
not compatible with other QEMU code which has a GPL-v2-only license.
Relicense the code in the .c and the .h file to GPL-v2-or-later,
to make it compatible with the rest of QEMU.
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini (for Red Hat) <pbonzini@redhat.com> Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240223161300.938542-1-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit fd7f95f23d6fe485332c1d4b489eb719fcb7c225) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While the 8-bit input elements are sequential in the input vector,
the 32-bit output elements are not sequential in the output matrix.
Do not attempt to compute 2 32-bit outputs at the same time.
Cc: qemu-stable@nongnu.org Fixes: 23a5e3859f5 ("target/arm: Implement SME integer outer product")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2083 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240305163931.242795-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit d572bcb222010b38b382871a23b2f38e2c3f4d2d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
David Parsons [Sat, 24 Feb 2024 14:06:20 +0000 (14:06 +0000)]
ui/cocoa: Fix window clipping on macOS 14
macOS Sonoma changes the NSView.clipsToBounds to false by default
where it was true in earlier version of macOS. This causes the window
contents to be occluded by the frame at the top of the window. This
fixes the issue by conditionally compiling the clipping on Sonoma to
true. NSView only exposes the clipToBounds in macOS 14 and so has
to be fixed via conditional compilation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1994 Signed-off-by: David Parsons <dave@daveparsons.net> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240224140620.39200-1-dave@daveparsons.net> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit f5af80271aad356233b2bea2369b3b2211fa395d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: qemu-stable@nongnu.org Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240304144456.3825935-3-berrange@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 9ea920dc28254cd9a363aaef01985dffd8abedd7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The assertion was never correct, because the alignment is a composite
of the image alignment and SHMLBA. Even if the image alignment didn't
match the image address, an assertion would not be correct -- more
appropriate would be an error message about an ill formed image. But
the image cannot be held to SHMLBA under any circumstances.
Fixes: ee94743034b ("linux-user: completely re-write init_guest_space")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2157 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reported-by: Alexey Sheplyakov <asheplyakov@yandex.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit b816e1b5ba58a986b10cd830d6617f351979ab91) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
tcg/aarch64: Apple does not align __int128_t in even registers
From https://developer.apple.com/documentation/xcode/writing-arm64-code-for-apple-platforms
When passing an argument with 16-byte alignment in integer registers,
Apple platforms allow the argument to start in an odd-numbered xN
register. The standard ABI requires it to begin in an even-numbered
xN register.
Cc: qemu-stable@nongnu.org Fixes: 5427a9a7604 ("tcg: Add TCG_TARGET_CALL_{RET,ARG}_I128")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2169 Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <9fc0c2c7-dd57-459e-aecb-528edb74b4a7@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 7f89fdf8ebe6ef8df48f0a05f44e1020c713a94e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Paolo Bonzini [Wed, 7 Feb 2024 16:38:01 +0000 (16:38 +0000)]
configure: run plugin TCG tests again
Commit 39fb3cfc28b ("configure: clean up plugin option handling", 2023-10-18)
dropped the CONFIG_PLUGIN line from tests/tcg/config-host.mak, due to confusion
caused by the shadowing of $config_host_mak. However, TCG tests were still
expecting it. Oops.
Put it back, in the meanwhile the shadowing is gone so it's clear that it goes
in the tests/tcg configuration.
Cc: <alex.bennee@linaro.org> Fixes: 39fb3cfc28b ("configure: clean up plugin option handling", 2023-10-18) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240124115332.612162-1-pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-4-alex.bennee@linaro.org>
(cherry picked from commit 15cc103362499bd94c5aec5fa66543d0de3bf4b5) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: fixup for 8.2.x - $config_host_mak without tests/tcg/ prefix -
for before v8.2.0-142-g606c3ba7a2 "configure: remove unnecessary subshell")
This commit has been wrongly back-ported to 8.2.x, $config_host_mak
in master didn't include the tests/tcg/ prefix, while 8.2.0 did it.
The result of this "backport" is this message during configure:
Thomas Huth [Thu, 29 Feb 2024 10:43:37 +0000 (11:43 +0100)]
chardev/char-socket: Fix TLS io channels sending too much data to the backend
Commit ffda5db65a ("io/channel-tls: fix handling of bigger read buffers")
changed the behavior of the TLS io channels to schedule a second reading
attempt if there is still incoming data pending. This caused a regression
with backends like the sclpconsole that check in their read function that
the sender does not try to write more bytes to it than the device can
currently handle.
The problem can be reproduced like this:
1) In one terminal, do this:
mkdir qemu-pki
cd qemu-pki
openssl genrsa 2048 > ca-key.pem
openssl req -new -x509 -nodes -days 365000 -key ca-key.pem -out ca-cert.pem
# enter some dummy value for the cert
openssl genrsa 2048 > server-key.pem
openssl req -new -x509 -nodes -days 365000 -key server-key.pem \
-out server-cert.pem
# enter some other dummy values for the cert
It looks like the second read does not trigger the chr_can_read() function
to be called before the second read, which should normally always be done
before sending bytes to a character device to see how much it can handle,
so the s->max_size in tcp_chr_read() still contains the old value from the
previous read. Let's make sure that we use the up-to-date value by calling
tcp_chr_read_poll() again here.
Fixes: ffda5db65a ("io/channel-tls: fix handling of bigger read buffers") Buglink: https://issues.redhat.com/browse/RHEL-24614 Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240229104339.42574-1-thuth@redhat.com> Reviewed-by: Antoine Damhet <antoine.damhet@blade-group.com> Tested-by: Antoine Damhet <antoine.damhet@blade-group.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 462945cd22d2bcd233401ed3aa167d83a8e35b05) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since Windows text files use CRLFs for all \n, the Windows version of QEMU
inserts a CR in the PCAP stream when a LF is encountered when using USB PCAP
files. This is due to the fact that the PCAP file is opened as TEXT instead
of BINARY.
To show an example, when using a very common protocol to USB disks, the BBB
protocol uses a 10-byte command packet. For example, the READ_CAPACITY(10)
command will have a command block length of 10 (0xA). When this 10-byte
command (part of the 31-byte CBW) is placed into the PCAP file, the Windows
file manager inserts a 0xD before the 0xA, turning the 31-byte CBW into a
32-byte CBW.
I believe simply opening the PCAP file as BINARY instead of TEXT will fix
this issue.
Resolves: https://bugs.launchpad.net/qemu/+bug/2054889 Signed-off-by: Benjamin David Lunt <benlunt@fysnet.net>
Message-ID: <000101da6823$ce1bbf80$6a533e80$@fysnet.net>
[thuth: Break long line to avoid checkpatch.pl error] Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 5e02a4fdebc442e34c5bb05e4540f85cc6e802f0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Wed, 21 Feb 2024 11:00:59 +0000 (12:00 +0100)]
hw/intc/Kconfig: Fix GIC settings when using "--without-default-devices"
When using "--without-default-devices", the ARM_GICV3_TCG and ARM_GIC_KVM
settings currently get disabled, though the arm virt machine is only of
very limited use in that case. This also causes the migration-test to
fail in such builds. Let's make sure that we always keep the GIC switches
enabled in the --without-default-devices builds, too.
Message-ID: <20240221110059.152665-1-thuth@redhat.com> Tested-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Thomas Huth <thuth@redhat.com>
(cherry picked from commit 8bd3f84d1f6fba0edebc450be6fa2c7630584df9) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Python is transitioning to a world where you're not allowed to use 'pip
install' outside of a virutal env by default. The rationale is to stop
use of pip clashing with distro provided python packages, which creates
a major headache on distro upgrades.
All our CI environments, however, are 100% disposable so the upgrade
headaches don't exist. Thus we can undo the python defaults to allow
pip to work.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20240222114038.2348718-1-berrange@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit a8bf9de2f4f398315ac5340e4b88c478d5457731) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alex Bennée [Tue, 27 Feb 2024 14:43:09 +0000 (14:43 +0000)]
tests/vm: avoid re-building the VM images all the time
The main problem is that "check-venv" is a .PHONY target will always
evaluate and trigger a full re-build of the VM images. While its
tempting to drop it from the dependencies that does introduce a
breakage on freshly configured builds.
Fortunately we do have the otherwise redundant --force flag for the
script which up until now was always on. If we make the usage of
--force conditional on dependencies other than check-venv triggering
the update we can avoid the costly rebuild and still run cleanly on a
fresh checkout.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2118 Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-4-alex.bennee@linaro.org>
(cherry picked from commit 151b7dba391fab64cc008a1fdba6ddcf6f8c39c8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Alex Bennée [Tue, 27 Feb 2024 14:43:10 +0000 (14:43 +0000)]
tests/vm: update openbsd image to 7.4
The old links are dead so even if we have the ISO cached we can't
finish the install. Update to the current stable and tweak the install
strings.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2192 Tested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-5-alex.bennee@linaro.org>
(cherry picked from commit 8467ac75b3b7207a49a1c6c7b87f0f7d2d0cea18) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Paolo Bonzini [Fri, 22 Dec 2023 08:48:35 +0000 (09:48 +0100)]
target/i386: leave the A20 bit set in the final NPT walk
The A20 mask is only applied to the final memory access. Nested
page tables are always walked with the raw guest-physical address.
Unlike the previous patch, in this one the masking must be kept, but
it was done too early.
Cc: qemu-stable@nongnu.org Fixes: 4a1e9d4d11c ("target/i386: Use atomic operations for pte updates", 2022-10-18) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit b5a9de3259f4c791bde2faff086dd5737625e41e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Paolo Bonzini [Fri, 22 Dec 2023 08:52:27 +0000 (09:52 +0100)]
target/i386: remove unnecessary/wrong application of the A20 mask
If ptw_translate() does a MMU_PHYS_IDX access, the A20 mask is already
applied in get_physical_address(), which is called via probe_access_full()
and x86_cpu_tlb_fill().
If ptw_translate() on the other hand does a MMU_NESTED_IDX access,
the A20 mask must not be applied to the address that is looked up in
the nested page tables; it must be applied only to the addresses that
hold the NPT entries (which is achieved via MMU_PHYS_IDX, per the
previous paragraph).
Therefore, we can remove A20 masking from the computation of the page
table entry's address, and let get_physical_address() or mmu_translate()
apply it when they know they are returning a host-physical address.
Cc: qemu-stable@nongnu.org Fixes: 4a1e9d4d11c ("target/i386: Use atomic operations for pte updates", 2022-10-18) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a28fe7dc1939333c81b895cdced81c69eb7c5ad0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Paolo Bonzini [Fri, 22 Dec 2023 17:01:52 +0000 (18:01 +0100)]
target/i386: Fix physical address truncation
The address translation logic in get_physical_address() will currently
truncate physical addresses to 32 bits unless long mode is enabled.
This is incorrect when using physical address extensions (PAE) outside
of long mode, with the result that a 32-bit operating system using PAE
to access memory above 4G will experience undefined behaviour.
The truncation code was originally introduced in commit 33dfdb5 ("x86:
only allow real mode to access 32bit without LMA"), where it applied
only to translations performed while paging is disabled (and so cannot
affect guests using PAE).
Commit 9828198 ("target/i386: Add MMU_PHYS_IDX and MMU_NESTED_IDX")
rearranged the code such that the truncation also applied to the use
of MMU_PHYS_IDX and MMU_NESTED_IDX. Commit 4a1e9d4 ("target/i386: Use
atomic operations for pte updates") brought this truncation into scope
for page table entry accesses, and is the first commit for which a
Windows 10 32-bit guest will reliably fail to boot if memory above 4G
is present.
The truncation code however is not completely redundant. Even though the
maximum address size for any executed instruction is 32 bits, helpers for
operations such as BOUND, FSAVE or XSAVE may ask get_physical_address()
to translate an address outside of the 32-bit range, if invoked with an
argument that is close to the 4G boundary. Likewise for processor
accesses, for example TSS or IDT accesses, when EFER.LMA==0.
So, move the address truncation in get_physical_address() so that it
applies to 32-bit MMU indexes, but not to MMU_PHYS_IDX and MMU_NESTED_IDX.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2040 Fixes: 4a1e9d4d11c ("target/i386: Use atomic operations for pte updates", 2022-10-18) Cc: qemu-stable@nongnu.org Co-developed-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit b1661801c184119a10ad6cbc3b80330fc22e7b2c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: drop unrelated change in target/i386/cpu.c)
Paolo Bonzini [Fri, 22 Dec 2023 16:47:38 +0000 (17:47 +0100)]
target/i386: check validity of VMCB addresses
MSR_VM_HSAVE_PA bits 0-11 are reserved, as are the bits above the
maximum physical address width of the processor. Setting them to
1 causes a #GP (see "15.30.4 VM_HSAVE_PA MSR" in the AMD manual).
The same is true of VMCB addresses passed to VMRUN/VMLOAD/VMSAVE,
even though the manual is not clear on that.
Cc: qemu-stable@nongnu.org Fixes: 4a1e9d4d11c ("target/i386: Use atomic operations for pte updates", 2022-10-18) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d09c79010ffd880dc69e7a21e3cfdef90b928fb8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Paolo Bonzini [Fri, 22 Dec 2023 08:27:36 +0000 (09:27 +0100)]
target/i386: mask high bits of CR3 in 32-bit mode
CR3 bits 63:32 are ignored in 32-bit mode (either legacy 2-level
paging or PAE paging). Do this in mmu_translate() to remove
the last where get_physical_address() meaningfully drops the high
bits of the address.
Cc: qemu-stable@nongnu.org Suggested-by: Richard Henderson <richard.henderson@linaro.org> Fixes: 4a1e9d4d11c ("target/i386: Use atomic operations for pte updates", 2022-10-18) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 68fb78d7d5723066ec2cacee7d25d67a4143b42f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Jessica Clarke [Mon, 26 Feb 2024 14:07:24 +0000 (14:07 +0000)]
pl031: Update last RTCLR value on write in case it's read back
The PL031 allows you to read RTCLR, which is meant to give you the last
value written. PL031State has an lr field which is used when reading
from RTCLR, and is present in the VM migration state, but we never
actually update it, so it always reads as its initial 0 value.
Cc: qemu-stable@nongnu.org Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240222000341.1562443-1-jrtc27@jrtc27.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 4d28d57c9f2eb1cdf70b29cea6e50282e010075b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Klaus Jensen [Thu, 22 Feb 2024 09:29:06 +0000 (10:29 +0100)]
hw/nvme: fix invalid endian conversion
numcntl is one byte and so is max_vfs. Using cpu_to_le16 on big endian
hosts results in numcntl being set to 0.
Fix by dropping the endian conversion.
Fixes: 99f48ae7ae ("hw/nvme: Add support for Secondary Controller List") Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Message-ID: <20240222-fix-sriov-numcntl-v1-1-d60bea5e72d0@samsung.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit d2b5bb860e6c17442ad95cc275feb07c1665be5c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Nicholas Piggin [Fri, 15 Dec 2023 08:58:49 +0000 (18:58 +1000)]
target/ppc: Fix crash on machine check caused by ifetch
is_prefix_insn_excp() loads the first word of the instruction address
which caused an exception, to determine whether or not it was prefixed
so the prefix bit can be set in [H]SRR1.
This works if the instruction image can be loaded, but if the exception
was caused by an ifetch, this load could fail and cause a recursive
exception and crash. Machine checks caused by ifetch are not excluded
from the prefix check and can crash (see issue 2108 for an example).
Fix this by excluding machine checks caused by ifetch from the prefix
check.
Cc: qemu-stable@nongnu.org Acked-by: Cédric Le Goater <clg@kaod.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2108 Fixes: 55a7fa34f89 ("target/ppc: Machine check on invalid real address access on POWER9/10") Fixes: 5a5d3b23cb2 ("target/ppc: Add SRR1 prefix indication to interrupt handlers") Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit c8fd9667e5975fe2e70a906e125a758737eab707) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Nicholas Piggin [Tue, 13 Feb 2024 07:50:43 +0000 (17:50 +1000)]
target/ppc: Fix lxv/stxv MSR facility check
The move to decodetree flipped the inequality test for the VEC / VSX
MSR facility check.
This caused application crashes under Linux, where these facility
unavailable interrupts are used for lazy-switching of VEC/VSX register
sets. Getting the incorrect interrupt would result in wrong registers
being loaded, potentially overwriting live values and/or exposing
stale ones.
Cc: qemu-stable@nongnu.org Reported-by: Joel Stanley <joel@jms.id.au> Fixes: 70426b5bb738 ("target/ppc: moved stxvx and lxvx from legacy to decodtree")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1769 Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Tested-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
(cherry picked from commit 2cc0e449d17310877fb28a942d4627ad22bb68ea) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Tue, 20 Feb 2024 16:56:02 +0000 (16:56 +0000)]
.gitlab-ci.d/windows.yml: Drop msys2-32bit job
MSYS2 is dropping support for 32-bit Windows. This shows up for us
as various packages we were using in our CI job no longer being
available to install, which causes the job to fail. In commit 8e31b744fdf we dropped the dependency on libusb and spice, but the
dtc package has also now been removed.
For us as QEMU upstream, "32 bit x86 hosts for system emulation" have
already been deprecated as of QEMU 8.0, so we are ready to drop them
anyway.
Drop the msys2-32bit CI job, as the first step in doing this.
This is cc'd to stable, because this job will also be broken for CI
on the stable branches. We can't drop 32-bit support entirely there,
but we will still be covering at least compilation for 32-bit Windows
via the cross-win32-system job.
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240220165602.135695-1-peter.maydell@linaro.org
(cherry picked from commit 5cd3ae4903e33982e7a9bbd04674af517e796d6e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Tianlan Zhou [Wed, 21 Feb 2024 19:52:10 +0000 (03:52 +0800)]
system/vl: Update description for input grab key
Input grab key should be Ctrl-Alt-g, not just Ctrl-Alt.
Fixes: f8d2c9369b ("sdl: use ctrl-alt-g as grab hotkey") Signed-off-by: Tianlan Zhou <bobby825@126.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 185311130f54ead75c407cdf83004d575829b5d2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Tianlan Zhou [Wed, 21 Feb 2024 19:52:09 +0000 (03:52 +0800)]
docs/system: Update description for input grab key
Input grab key should be Ctrl-Alt-g, not just Ctrl-Alt.
Fixes: f8d2c9369b ("sdl: use ctrl-alt-g as grab hotkey") Signed-off-by: Tianlan Zhou <bobby825@126.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 4a20ac400ff0753f159071764826b20e5320cde9) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Fri, 16 Feb 2024 09:16:21 +0000 (10:16 +0100)]
hw/hppa/Kconfig: Fix building with "configure --without-default-devices"
When running "configure" with "--without-default-devices", building
of qemu-system-hppa currently fails with:
/usr/bin/ld: libqemu-hppa-softmmu.fa.p/hw_hppa_machine.c.o: in function `machine_HP_common_init_tail':
hw/hppa/machine.c:399: undefined reference to `usb_bus_find'
/usr/bin/ld: hw/hppa/machine.c:399: undefined reference to `usb_create_simple'
/usr/bin/ld: hw/hppa/machine.c:400: undefined reference to `usb_bus_find'
/usr/bin/ld: hw/hppa/machine.c:400: undefined reference to `usb_create_simple'
collect2: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.
make: *** [Makefile:162: run-ninja] Error 1
And after fixing this, the qemu-system-hppa binary refuses to run
due to the missing 'pci-ohci' and 'pci-serial' devices. Let's add
the right config switches to fix these problems.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 04b86ccb5dc8a1fad809753cfbaafd4bb13283d4) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Tianlan Zhou [Wed, 7 Feb 2024 17:20:25 +0000 (01:20 +0800)]
ui/console: Fix console resize with placeholder surface
In `qemu_console_resize()`, the old surface of the console is keeped if the new
console size is the same as the old one. If the old surface is a placeholder,
and the new size of console is the same as the placeholder surface (640*480),
the surface won't be replace.
In this situation, the surface's `QEMU_PLACEHOLDER_FLAG` flag is still set, so
the console won't be displayed in SDL display mode.
This patch fixes this problem by forcing a new surface if the old one is a
placeholder.
Signed-off-by: Tianlan Zhou <bobby825@126.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240207172024.8-1-bobby825@126.com>
(cherry picked from commit 95b08fee8f68d284a5028d37fd28be7a70c8e92b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fiona Ebner [Wed, 24 Jan 2024 10:57:48 +0000 (11:57 +0100)]
ui/clipboard: mark type as not available when there is no data
With VNC, a client can send a non-extended VNC_MSG_CLIENT_CUT_TEXT
message with len=0. In qemu_clipboard_set_data(), the clipboard info
will be updated setting data to NULL (because g_memdup(data, size)
returns NULL when size is 0). If the client does not set the
VNC_ENCODING_CLIPBOARD_EXT feature when setting up the encodings, then
the 'request' callback for the clipboard peer is not initialized.
Later, because data is NULL, qemu_clipboard_request() can be reached
via vdagent_chr_write() and vdagent_clipboard_recv_request() and
there, the clipboard owner's 'request' callback will be attempted to
be called, but that is a NULL pointer.
In particular, this can happen when using the KRDC (22.12.3) VNC
client.
Another scenario leading to the same issue is with two clients (say
noVNC and KRDC):
The noVNC client sets the extension VNC_FEATURE_CLIPBOARD_EXT and
initializes its cbpeer.
The KRDC client does not, but triggers a vnc_client_cut_text() (note
it's not the _ext variant)). There, a new clipboard info with it as
the 'owner' is created and via qemu_clipboard_set_data() is called,
which in turn calls qemu_clipboard_update() with that info.
In qemu_clipboard_update(), the notifier for the noVNC client will be
called, i.e. vnc_clipboard_notify() and also set vs->cbinfo for the
noVNC client. The 'owner' in that clipboard info is the clipboard peer
for the KRDC client, which did not initialize the 'request' function.
That sounds correct to me, it is the owner of that clipboard info.
Then when noVNC sends a VNC_MSG_CLIENT_CUT_TEXT message (it did set
the VNC_FEATURE_CLIPBOARD_EXT feature correctly, so a check for it
passes), that clipboard info is passed to qemu_clipboard_request() and
the original segfault still happens.
Fix the issue by handling updates with size 0 differently. In
particular, mark in the clipboard info that the type is not available.
While at it, switch to g_memdup2(), because g_memdup() is deprecated.
Cc: qemu-stable@nongnu.org Fixes: CVE-2023-6683 Reported-by: Markus Frank <m.frank@proxmox.com> Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Tested-by: Markus Frank <m.frank@proxmox.com>
Message-ID: <20240124105749.204610-1-f.ebner@proxmox.com>
(cherry picked from commit 405484b29f6548c7b86549b0f961b906337aa68a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
ui: reject extended clipboard message if not activated
The extended clipboard message protocol requires that the client
activate the extension by requesting a psuedo encoding. If this
is not done, then any extended clipboard messages from the client
should be considered invalid and the client dropped.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240115095119.654271-1-berrange@redhat.com>
(cherry picked from commit 4cba8388968b70fe20e290221dc421c717051fdd) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Ziqiao Kong [Thu, 15 Feb 2024 09:50:17 +0000 (17:50 +0800)]
target/i386: Generate an illegal opcode exception on cmp instructions with lock prefix
target/i386: As specified by Intel Manual Vol2 3-180, cmp instructions
are not allowed to have lock prefix and a `UD` should be raised. Without
this patch, s1->T0 will be uninitialized and used in the case OP_CMPL.
Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com>
Message-ID: <20240215095015.570748-2-ziqiaokong@gmail.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 99d0dcd7f102c07a510200d768cae65e5db25d23) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Xiaoyao Li [Thu, 25 Jan 2024 02:40:14 +0000 (21:40 -0500)]
i386/cpuid: Decrease cpuid_i when skipping CPUID leaf 1F
Existing code misses a decrement of cpuid_i when skip leaf 0x1F.
There's a blank CPUID entry(with leaf, subleaf as 0, and all fields
stuffed 0s) left in the CPUID array.
It conflicts with correct CPUID leaf 0.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by:Yang Weijiang <weijiang.yang@intel.com>
Message-ID: <20240125024016.2521244-2-xiaoyao.li@intel.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 10f92799af8ba3c3cef2352adcd4780f13fbab31) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Xiaoyao Li [Mon, 15 Jan 2024 09:13:25 +0000 (04:13 -0500)]
i386/cpu: Mask with XCR0/XSS mask for FEAT_XSAVE_XCR0_HI and FEAT_XSAVE_XSS_HI leafs
The value of FEAT_XSAVE_XCR0_HI leaf and FEAT_XSAVE_XSS_HI leaf also
need to be masked by XCR0 and XSS mask respectively, to make it
logically correct.
Fixes: 301e90675c3f ("target/i386: Enable support for XSAVES based features") Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Yang Weijiang <weijiang.yang@intel.com>
Message-ID: <20240115091325.1904229-3-xiaoyao.li@intel.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit a11a365159b944e05be76f3ec3b98c8b38cb70fd) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Xiaoyao Li [Mon, 15 Jan 2024 09:13:24 +0000 (04:13 -0500)]
i386/cpu: Clear FEAT_XSAVE_XSS_LO/HI leafs when CPUID_EXT_XSAVE is not available
Leaf FEAT_XSAVE_XSS_LO and FEAT_XSAVE_XSS_HI also need to be cleared
when CPUID_EXT_XSAVE is not set.
Fixes: 301e90675c3f ("target/i386: Enable support for XSAVES based features") Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Yang Weijiang <weijiang.yang@intel.com>
Message-ID: <20240115091325.1904229-2-xiaoyao.li@intel.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 81f5cad3858f27623b1b14467926032d229b76cc) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Thu, 15 Feb 2024 15:50:09 +0000 (15:50 +0000)]
.gitlab-ci/windows.yml: Don't install libusb or spice packages on 32-bit
When msys2 updated their libusb packages to libusb 1.0.27, they
dropped support for building them for mingw32, leaving only mingw64
packages. This broke our CI job, as the 'pacman' package install now
fails with:
error: target not found: mingw-w64-i686-libusb
error: target not found: mingw-w64-i686-usbredir
(both these binary packages are from the libusb source package).
Similarly, spice is now 64-bit only:
error: target not found: mingw-w64-i686-spice
Fix this by dropping these packages from the list we install for our
msys2-32bit build. We do this with a simple mechanism for the
msys2-64bit and msys2-32bit jobs to specify a list of extra packages
to install on top of the common ones we install for both jobs.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2160 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 20240215155009.2422335-1-peter.maydell@linaro.org
(cherry picked from commit 8e31b744fdf2c5d933681e4128acee72a83af4b8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Kevin Wolf [Fri, 9 Feb 2024 17:31:03 +0000 (18:31 +0100)]
iotests: Make 144 deterministic again
Since commit effd60c8 changed how QMP commands are processed, the order
of the block-commit return value and job events in iotests 144 wasn't
fixed and more and caused the test to fail intermittently.
Change the test to cache events first and then print them in a
predefined order.
Waiting three times for JOB_STATUS_CHANGE is a bit uglier than just
waiting for the JOB_STATUS_CHANGE that has "status": "ready", but the
tooling we have doesn't seem to allow the latter easily.
Fixes: effd60c878176bcaf97fa7ce2b12d04bb8ead6f7
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2126 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20240209173103.239994-1-kwolf@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit cc29c12ec629ba68a4a6cb7d165c94cc8502815a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Peter Maydell [Thu, 8 Feb 2024 15:33:46 +0000 (15:33 +0000)]
target/arm: Don't get MDCR_EL2 in pmu_counter_enabled() before checking ARM_FEATURE_PMU
It doesn't make sense to read the value of MDCR_EL2 on a non-A-profile
CPU, and in fact if you try to do it we will assert:
#6 0x00007ffff4b95e96 in __GI___assert_fail
(assertion=0x5555565a8c70 "!arm_feature(env, ARM_FEATURE_M)", file=0x5555565a6e5c "../../target/arm/helper.c", line=12600, function=0x5555565a9560 <__PRETTY_FUNCTION__.0> "arm_security_space_below_el3") at ./assert/assert.c:101
#7 0x0000555555ebf412 in arm_security_space_below_el3 (env=0x555557bc8190) at ../../target/arm/helper.c:12600
#8 0x0000555555ea6f89 in arm_is_el2_enabled (env=0x555557bc8190) at ../../target/arm/cpu.h:2595
#9 0x0000555555ea942f in arm_mdcr_el2_eff (env=0x555557bc8190) at ../../target/arm/internals.h:1512
We might call pmu_counter_enabled() on an M-profile CPU (for example
from the migration pre/post hooks in machine.c); this should always
return false because these CPUs don't set ARM_FEATURE_PMU.
Avoid the assertion by not calling arm_mdcr_el2_eff() before we
have done the early return for "PMU not present".
This fixes an assertion failure if you try to do a loadvm or
savevm for an M-profile board.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2155 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240208153346.970021-1-peter.maydell@linaro.org
(cherry picked from commit ac1d88e9e7ca0bed83e91e07ce6d0597f10cc77d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When we added SVE_MTEDESC_SHIFT, we effectively limited the
maximum size of MTEDESC. Adjust SIZEM1 to consume the remaining
bits (32 - 10 - 5 - 12 == 5). Assert that the data to be stored
fits within the field (expecting 8 * 4 - 1 == 31, exact fit).
Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit b12a7671b6099a26ce5d5ab09701f151e21c112c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
target/arm: Fix nregs computation in do_{ld,st}_zpa
The field is encoded as [0-3], which is convenient for
indexing our array of function pointers, but the true
value is [1-4]. Adjust before calling do_mem_zpa.
Add an assert, and move the comment re passing ZT to
the helper back next to the relevant code.
Cc: qemu-stable@nongnu.org Fixes: 206adacfb8d ("target/arm: Add mte helpers for sve scalar + int loads") Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 64c6e7444dff64b42d11b836b9aec9acfbe8ecc2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
linux-user/aarch64: Choose SYNC as the preferred MTE mode
The API does not generate an error for setting ASYNC | SYNC; that merely
constrains the selection vs the per-cpu default. For qemu linux-user,
choose SYNC as the default.
Cc: qemu-stable@nongnu.org Reported-by: Gustavo Romero <gustavo.romero@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Gustavo Romero <gustavo.romero@linaro.org>
Message-id: 20240207025210.8837-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 681dfc0d552963d4d598350d26097a692900b408) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Jonathan Cameron [Fri, 26 Jan 2024 12:01:32 +0000 (12:01 +0000)]
tests/acpi: Update DSDT.cxl to reflect change _STA return value.
_STA will now return 0xB (in common with most other devices)
rather than not setting the bits to indicate this fake device
has not been enabled, and self tests haven't passed.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-13-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit b24a981b9f1c4767aaea815e504a2c7aeb405d72) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Jonathan Cameron [Fri, 26 Jan 2024 12:01:31 +0000 (12:01 +0000)]
hw/i386: Fix _STA return value for ACPI0017
Found whilst testing a series for the linux kernel that actually
bothers to check if enabled is set. 0xB is the option used
for vast majority of DSDT entries in QEMU.
It is a little odd for a device that doesn't really exist and
is simply a hook to tell the OS there is a CEDT table but 0xB
seems a reasonable choice and avoids need to special case
this device in the OS.
Means:
* Device present.
* Device enabled and decoding it's resources.
* Not shown in UI
* Functioning properly
* No battery (on this device!)
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-12-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit d9ae5802f656f6fb53b788747ba557a826b6e740) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Jonathan Cameron [Fri, 26 Jan 2024 12:01:30 +0000 (12:01 +0000)]
tests/acpi: Allow update of DSDT.cxl
The _STA value returned currently indicates the ACPI0017 device
is not enabled. Whilst this isn't a real device, setting _STA
like this may prevent an OS from enumerating it correctly and
hence from parsing the CEDT table.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-11-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 14ec4ff3e4293635240ba5a7afe7a0f3ba447d31) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Zhenzhong Duan [Thu, 25 Jan 2024 07:37:06 +0000 (15:37 +0800)]
smmu: Clear SMMUPciBus pointer cache when system reset
s->smmu_pcibus_by_bus_num is a SMMUPciBus pointer cache indexed
by bus number, bus number may not always be a fixed value,
i.e., guest reboot to different kernel which set bus number with
different algorithm.
This could lead to smmu_iommu_mr() providing the wrong iommu MR.
Suggested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240125073706.339369-3-zhenzhong.duan@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 8a6b3f4dc95a064e88adaca86374108da0ecb38d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Zhenzhong Duan [Thu, 25 Jan 2024 07:37:05 +0000 (15:37 +0800)]
virtio_iommu: Clear IOMMUPciBus pointer cache when system reset
s->iommu_pcibus_by_bus_num is a IOMMUPciBus pointer cache indexed
by bus number, bus number may not always be a fixed value,
i.e., guest reboot to different kernel which set bus number with
different algorithm.
This could lead to endpoint binding to wrong iommu MR in
virtio_iommu_get_endpoint(), then vfio device setup wrong
mapping from other device.
Remove the memset in virtio_iommu_device_realize() to avoid
redundancy with memset in system reset.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20240125073706.339369-2-zhenzhong.duan@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 9a457383ce9d309d4679b079fafb51f0a2d949aa) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Li Zhijian [Fri, 26 Jan 2024 12:01:27 +0000 (12:01 +0000)]
hw/cxl: Pass CXLComponentState to cache_mem_ops
cache_mem_ops.{read,write}() interprets opaque as
CXLComponentState(cxl_cstate) instead of ComponentRegisters(cregs).
Fortunately, cregs is the first member of cxl_cstate, so their values are
the same.
Fixes: 9e58f52d3f8 ("hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5)") Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-8-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 729d45a6af06753d3e330f589c248fe9687c5cd5) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Hyeonggon Yoo [Fri, 26 Jan 2024 12:01:26 +0000 (12:01 +0000)]
hw/cxl/device: read from register values in mdev_reg_read()
In the current mdev_reg_read() implementation, it consistently returns
that the Media Status is Ready (01b). This was fine until commit 25a52959f99d ("hw/cxl: Add support for device sanitation") because the
media was presumed to be ready.
However, as per the CXL 3.0 spec "8.2.9.8.5.1 Sanitize (Opcode 4400h)",
during sanitation, the Media State should be set to Disabled (11b). The
mentioned commit correctly sets it to Disabled, but mdev_reg_read()
still returns Media Status as Ready.
To address this, update mdev_reg_read() to read register values instead
of returning dummy values.
Note that __toggle_media() managed to not only write something
that no one read, it did it to the wrong register storage and
so changed the reported mailbox size which was definitely not
the intent. That gets fixed as a side effect of allocating
separate state storage for this register.
Fixes: commit 25a52959f99d ("hw/cxl: Add support for device sanitation") Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-7-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit f7509f462c788a347521f90f19d623908c4fbcc5) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Ira Weiny [Fri, 26 Jan 2024 12:01:24 +0000 (12:01 +0000)]
cxl/cdat: Fix header sum value in CDAT checksum
The addition of the DCD support for CXL type-3 devices extended the CDAT
table large enough that the checksum being returned was incorrect.[1]
This was because the checksum value was using the header length field
rather than each of the 4 bytes of the length field. This was
previously not seen because the length of the CDAT data was less than
256 thus resulting in an equivalent checksum value.
Properly calculate the checksum for the CDAT header.
Fixes: aba578bdace5 ("hw/cxl/cdat: CXL CDAT Data Object Exchange implementation") Cc: Huai-Cheng Kuo <hchkuo@avery-design.com.tw> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 64fdad5e67587e88c2f1d8f294e89403856a4a31) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Ira Weiny [Fri, 26 Jan 2024 12:01:21 +0000 (12:01 +0000)]
cxl/cdat: Handle cdat table build errors
The callback for building CDAT tables may return negative error codes.
This was previously unhandled and will result in potentially huge
allocations later on in ct3_build_cdat()
Detect the negative error code and defer cdat building.
Fixes: f5ee7413d592 ("hw/mem/cxl-type3: Add CXL CDAT Data Object Exchange") Cc: Huai-Cheng Kuo <hchkuo@avery-design.com.tw> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240126120132.24248-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit c62926f730d08450502d36548e28dd727c998ace) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Correct arithmetic for separating high and low
on a large negative number.
Cc: qemu-stable@nongnu.org Fixes: 79ffece4447 ("tcg/arm: Implement direct branch for goto_tb")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1714 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit e41f1825b43796c3508ef309ed0b150ef89acc44) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Sven Schnelle [Mon, 5 Feb 2024 19:47:17 +0000 (20:47 +0100)]
hw/net/tulip: add chip status register values
Netbsd isn't able to detect a link on the emulated tulip card. That's
because netbsd reads the Chip Status Register of the Phy (address
0x14). The default phy data in the qemu tulip driver is all zero,
which means no link is established and autonegotation isn't complete.
Therefore set the register to 0x3b40, which means:
Link is up, Autonegotation complete, Full Duplex, 100MBit/s Link
speed.
Also clear the mask because this register is read only.
Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Helge Deller <deller@gmx.de> Tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de>
(cherry picked from commit 9b60a3ed5569a70bbdd29e3c9ec4c5d4685c6e2c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Akihiko Odaki [Mon, 29 Jan 2024 08:03:08 +0000 (17:03 +0900)]
hw/smbios: Fix port connector option validation
qemu_smbios_type8_opts did not have the list terminator and that
resulted in out-of-bound memory access. It also needs to have an element
for the type option.
Cc: qemu-stable@nongnu.org Fixes: fd8caa253c56 ("hw/smbios: support for type 8 (port connector)") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Ani Sinha <anisinha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 196578c9d051d19c23e6c13e97b791a41b318315)
qemu_smbios_type11_opts did not have the list terminator and that
resulted in out-of-bound memory access. It also needs to have an element
for the type option.
Cc: qemu-stable@nongnu.org Fixes: 2d6dcbf93fb0 ("smbios: support setting OEM strings table") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Ani Sinha <anisinha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit cd8a35b913c24248267c682cb9a348461c106139)
Paolo Bonzini [Wed, 7 Feb 2024 16:38:01 +0000 (16:38 +0000)]
configure: run plugin TCG tests again
Commit 39fb3cfc28b ("configure: clean up plugin option handling", 2023-10-18)
dropped the CONFIG_PLUGIN line from tests/tcg/config-host.mak, due to confusion
caused by the shadowing of $config_host_mak. However, TCG tests were still
expecting it. Oops.
Put it back, in the meanwhile the shadowing is gone so it's clear that it goes
in the tests/tcg configuration.
Cc: <alex.bennee@linaro.org> Fixes: 39fb3cfc28b ("configure: clean up plugin option handling", 2023-10-18) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20240124115332.612162-1-pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-4-alex.bennee@linaro.org>
(cherry picked from commit 15cc103362499bd94c5aec5fa66543d0de3bf4b5) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup)
Fabiano Rosas [Wed, 7 Feb 2024 16:37:59 +0000 (16:37 +0000)]
tests/docker: Add sqlite3 module to openSUSE Leap container
Avocado needs sqlite3:
Failed to load plugin from module "avocado.plugins.journal":
ImportError("Module 'sqlite3' is not installed.
Use: sudo zypper install python311 to install it")
>From 'zypper info python311':
"This package supplies rich command line features provided by
readline, and sqlite3 support for the interpreter core, thus forming
a so called "extended" runtime."
Include the appropriate package in the lcitool mappings which will
guarantee the dockerfile gets properly updated when lcitool is
run. Also include the updated dockerfile.
Signed-off-by: Fabiano Rosas <farosas@suse.de> Suggested-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240117164227.32143-1-farosas@suse.de> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-2-alex.bennee@linaro.org>
(cherry picked from commit 7485508341f4e8c6802f7716a64dd49a4dd28d22) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
hw/riscv/virt-acpi-build.c: fix leak in build_rhct()
The 'isa' char pointer isn't being freed after use.
Issue detected by Valgrind:
==38752== 128 bytes in 1 blocks are definitely lost in loss record 3,190 of 3,884
==38752== at 0x484280F: malloc (vg_replace_malloc.c:442)
==38752== by 0x5189619: g_malloc (gmem.c:130)
==38752== by 0x51A5BF2: g_strconcat (gstrfuncs.c:628)
==38752== by 0x6C1E3E: riscv_isa_string_ext (cpu.c:2321)
==38752== by 0x6C1E3E: riscv_isa_string (cpu.c:2343)
==38752== by 0x6BD2EA: build_rhct (virt-acpi-build.c:232)
==38752== by 0x6BD2EA: virt_acpi_build (virt-acpi-build.c:556)
==38752== by 0x6BDC86: virt_acpi_setup (virt-acpi-build.c:662)
==38752== by 0x9C8DC6: notifier_list_notify (notify.c:39)
==38752== by 0x4A595A: qdev_machine_creation_done (machine.c:1589)
==38752== by 0x61E052: qemu_machine_creation_done (vl.c:2680)
==38752== by 0x61E052: qmp_x_exit_preconfig.part.0 (vl.c:2709)
==38752== by 0x6220C6: qmp_x_exit_preconfig (vl.c:2702)
==38752== by 0x6220C6: qemu_init (vl.c:3758)
==38752== by 0x425858: main (main.c:47)
Fixes: ebfd392893 ("hw/riscv/virt: virt-acpi-build.c: Add RHCT Table") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122221529.86562-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
(cherry picked from commit 1a49762c07d001ce291e4fc6773317f5611af3a4) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: context fixup)
Avihai Horon [Thu, 25 Jan 2024 16:25:12 +0000 (18:25 +0200)]
migration: Fix logic of channels and transport compatibility check
The commit in the fixes line mistakenly modified the channels and
transport compatibility check logic so it now checks multi-channel
support only for socket transport type.
Thus, running multifd migration using a transport other than socket that
is incompatible with multi-channels (such as "exec") would lead to a
segmentation fault instead of an error message.
For example:
(qemu) migrate_set_capability multifd on
(qemu) migrate -d "exec:cat > /tmp/vm_state"
Segmentation fault (core dumped)
Fix it by checking multi-channel compatibility for all transport types.
Cc: qemu-stable <qemu-stable@nongnu.org> Fixes: d95533e1cdcc ("migration: modify migration_channels_and_uri_compatible() for new QAPI syntax") Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20240125162528.7552-2-avihaih@nvidia.com Signed-off-by: Peter Xu <peterx@redhat.com>
(cherry picked from commit 3205bebd4fc6dd501fb8b10c93ddce9da18e09db) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Stefan Hajnoczi [Mon, 22 Jan 2024 17:26:25 +0000 (12:26 -0500)]
virtio-blk: avoid using ioeventfd state in irqfd conditional
Requests that complete in an IOThread use irqfd to notify the guest
while requests that complete in the main loop thread use the traditional
qdev irq code path. The reason for this conditional is that the irq code
path requires the BQL:
There is a corner case where the conditional invokes the irq code path
instead of the irqfd code path:
static void virtio_blk_stop_ioeventfd(VirtIODevice *vdev)
{
...
/*
* Set ->ioeventfd_started to false before draining so that host notifiers
* are not detached/attached anymore.
*/
s->ioeventfd_started = false;
/* Wait for virtio_blk_dma_restart_bh() and in flight I/O to complete */
blk_drain(s->conf.conf.blk);
During blk_drain() the conditional produces the wrong result because
ioeventfd_started is false.
Use qemu_in_iothread() instead of checking the ioeventfd state.
Cc: qemu-stable@nongnu.org Buglink: https://issues.redhat.com/browse/RHEL-15394 Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240122172625.415386-1-stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit bfa36802d1704fc413c590ebdcc4e5ae0eacf439) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: fixup for v8.2.0-809-g3cdaf3dd4a
"virtio-blk: rename dataplane to ioeventfd")
projects / thirdparty / qemu.git / log
