Steven Bosscher [Tue, 19 Jun 2012 19:55:33 +0000 (19:55 +0000)]
target.def (output_ident): New hook.
gcc/
* target.def (output_ident): New hook.
* targhooks.h (default_asm_output_ident_directive): Add prototype.
* varasm.c (assemble_asm): Only prefix a tab if the string does not
already start with one.
(default_asm_output_ident_directive): New function to emit
.ident as a top-level asm node while parsing, or directly to
asm_out_file after parsing.
* toplev.c (compile_file): Print a GCC .ident with
targetm.asm_out.output_ident.
* doc/tm.texi.in (ASM_OUTPUT_IDENT): Remove documentation for macro.
(TARGET_ASM_OUTPUT_IDENT): Add @hook for this.
* doc/tm.texi: Update.
* config/microblaze/microblaze-protos.h (microblaze_asm_output_ident):
Add prototype.
* config/microblaze/microblaze.c: Include cgraph.h for add_asm_node.
(microblaze_asm_output_ident): Rewrite to work similar to
default_asm_output_ident_directive for front-end .idents.
* config/microblaze/microblaze.h (ASM_OUTPUT_IDENT): Remove.
(TARGET_ASM_OUTPUT_IDENT): Define.
* config/rx/rx.c: Include cgraph.h for add_asm_node.
(rx_asm_output_ident): New function, similar to
default_asm_output_ident_directive, but handle AS100 syntax also, so
that #ident also works for rx in AS100 syntax.
(TARGET_ASM_OUTPUT_IDENT): Define.
* config/rx/rx.h (IDENT_ASM_OP): Remove.
* Makefile.in: Fix dependencies for c-family/c-lex.o.
c-family/
* c-lex.c: Do not include output.h.
(cb_ident): Try to put out .ident with targetm.asm_out.output_ident.
Remove uses of ASM_OUTPUT_IDENT.
ada/
* gcc-interface/trans.c: Include target.h.
(gigi): Try to put out .ident with targetm.asm_out.output_ident.
Remove uses of ASM_OUTPUT_IDENT.
* gcc-interface/Make-lang.in: Fix dependencies.
Uros Bizjak [Tue, 19 Jun 2012 18:24:26 +0000 (20:24 +0200)]
i386.md (FIST_ROUNDING): New int iterator.
* config/i386/i386.md (FIST_ROUNDING): New int iterator.
(rounding): Handle UNSPEC_FIST_{FLOOR,CEIL}.
(ROUNDING): Ditto.
(*fist<mode>2_<rounding>_1): Macroize insn from
*fist<mode>2_{floor,ceil}_1 using FIST_ROUNDING int iterator.
(fistdi2_<rounding>): Macroize insn from
fistdi2_{floor,ceil} using FIST_ROUNDING int iterator.
(fistdi2_<rounding>_with_temp and splitters): Macroize insn and
corresponding splitters from fistdi2_{floor,ceil} and corresponding
splitters using FIST_ROUNDING int iterator.
(fist<mode>2_<rounding>): Macroize insn from
fist<mode>2_{floor,ceil} using FIST_ROUNDING int iterator.
(fist<mode>2_<rounding>_with_temp and splitters): Macroize insn and
corresponding splitters from fist<mode>2_{floor,ceil} and corresponding
splitters using FIST_ROUNDING int iterator.
(l<rounding>xf<mode>2): Macroize expander from l{floor,ceil}xf<mode>2
using FIST_ROUNDING int iterator.
Uros Bizjak [Tue, 19 Jun 2012 16:32:57 +0000 (18:32 +0200)]
i386.md (FRNDINT_ROUNDING): New int iterator.
* config/i386/i386.md (FRNDINT_ROUNDING): New int iterator.
(rounding): New int attribute.
(ROUNDING): Ditto.
(frndintxf2_<rounding>): Macroize insn from
frndintxf2_{floor,ceil,trunc} using FRNDINT_ROUNDING int iterator.
(frndintxf2_<rounding>_i387): Macroize insn from
frndintxf2_{floor,ceil,trunc}_i387 using FRNDINT_ROUNDING int iterator.
Richard Guenther [Tue, 19 Jun 2012 09:19:07 +0000 (09:19 +0000)]
re PR middle-end/53708 (Many failures of the objc tests with -O3 -fnext-runtime and -m32)
2012-06-19 Richard Guenther <rguenther@suse.de>
PR tree-optimization/53708
* tree-vect-data-refs.c (vect_can_force_dr_alignment_p): Preserve
user-supplied alignment and alignment of decls with the used
attribute.
Lawrence Crowl [Tue, 19 Jun 2012 01:30:31 +0000 (01:30 +0000)]
The intent of the phases was to have a high-level but mutually exclusive accounting of compile time.
The intent of the phases was to have a high-level but mutually exclusive
accounting of compile time. We want to track compile time in a way that
tells us which conceptual phases are taking the most time. That intent
is not currently satisfied. This patch restores that intent.
Add code to verify that the sum of the phase times is less than the total
time, to detect when phases are overlapped. A slight amount of leeway is
required due to time jitters. This verification is done as the last step
in printing timevars so that any timevar information is not lost.
Rename the phases to be clearer about what they measure, so that they
are less likely to be modified to be overlapping. The primary example
is to change TV_PHASE_GENERATE to TV_PHASE_LATE_ASM, meaning late work
on the assembly. This name change avoids confusion n moving the timevar
start call after the call to lang_hooks.decls.final_write_globals, which
prevents overlapping phases.
Each implementation of lang_hooks.decls.final_write_globals, is responsible
for starting and stopping its own phases. Each implementation currently has
a first phase of TV_PHASE_DEFERRED for front-end work deferred until after
parsing is complete. The second phase has been renamed from TV_PHASE_CGRAPH
to TV_PHASE_OPT_GEN, to better reflect its use as the main optimization
and generation phase. This phase accounts for 70%-80% of compilation time
during bootstrap. The third phase is TV_PHASE_DBGINFO, except in cp/decl2.c,
where it is TV_PHASE_CHECK_DBGINFO because cc1plus mixes checking in with
debug info generation. In langhooks.c, write_global_declarations was
using TV_PHASE_CHECK_DBGINFO, but it was doing no checking. So, it now
uses TV_PHASE_DBGINFO.
The changes to LTO are significant. First, initialization now uses
TV_PHASE_SETUP. Reading files now uses TV_PHASE_STREAM_IN. Writing files
now uses TV_PHASE_STREAM_OUT. The remaining phase is TV_PHASE_OPT_GEN
(formerly TV_PHASE_CGRAPH). Finally, because LTO is treated as a front
end, TV_PHASE_PARSING and TV_PARSE_GLOBAL active around it. It is not
parsing, and so those timers should not be active. Rather than make all
front ends manage them, we turn them off as the first thing in LTO and turn
them back on as the last thing.
Tested on x86_64.
Index: gcc/ChangeLog
2012-06-18 Lawrence Crowl <crowl@google.com>
* timevar.def (TV_PHASE_GENERATE): Rename to TV_PHASE_LATE_ASM.
(TV_PHASE_CGRAPH): Rename to TV_PHASE_OPT_GEN.
(TV_PHASE_STREAM_IN): New.
(TV_PHASE_STREAM_OUT): New.
* timevar.c (validate_phases): New.
(timevar_print): Call validate_phases.
* c-decl.c (c_write_global_declarations): Rename use of TV_PHASE_CGRAPH
to TV_PHASE_OPT_GEN.
* langhooks.c (write_global_declarations): Rename use of
TV_PHASE_CGRAPH to TV_PHASE_OPT_GEN. Use TV_PHASE_DBGINFO instead of
TV_PHASE_CHECK_DBGINFO.
* toplev.c (compile_file): Rename use of TV_PHASE_GENERATE to
TV_PHASE_LATE_ASM. Move start of TV_PHASE_LATE_ASM to after call to
lang_hooks.decls.final_write_globals.
Index: gcc/cp/ChangeLog
2012-06-18 Lawrence Crowl <crowl@google.com>
* decl2.c (cp_write_global_declarations): Rename use of TV_PHASE_CGRAPH
to TV_PHASE_OPT_GEN.
Index: gcc/lto/ChangeLog
2012-06-18 Lawrence Crowl <crowl@google.com>
* lto.c (do_whole_program_analysis): Rename use of TV_PHASE_CGRAPH to
TV_PHASE_OPT_GEN. Use new timevar TV_PHASE_STREAM_OUT around the call
to lto_wpa_write_files.
(lto_main): Rename use of TV_PHASE_CGRAPH to TV_PHASE_OPT_GEN. Move
start of TV_PHASE_OPT_GEN to include call to materialize_cgraph. Use
TV_PHASE_SETUP for the call to lto_init. Use new timevar
TV_PHASE_STREAM_IN around the call to read_cgraph_and_symbols.
Turn TV_PHASE_PARSING off then back on again, because LTO is pretending
to be a front end, but is not one.
Tobias Burnus [Mon, 18 Jun 2012 18:37:16 +0000 (20:37 +0200)]
intrinsic.h (gfc_resolve_rank): New prototype.
2012-06-18 Tobias Burnus <burnus@net-b.de>
* intrinsic.h (gfc_resolve_rank): New prototype.
* intrinsic.c (add_functions): Use gfc_resolve_rank.
* iresolve.c (add_functions): New function.
* trans-intrinsic.c (gfc_conv_intrinsic_rank): New function.
(gfc_conv_intrinsic_function): Call it.
Ian Bolton [Mon, 18 Jun 2012 18:06:54 +0000 (18:06 +0000)]
As a result of the previous changes, epilogue_insns pattern can only be generated in Thumb1.
As a result of the previous changes, epilogue_insns pattern can only be
generated in Thumb1. After removing other cases in define_insn for
epilogue_insns, the function arm_output_epilogue becomes dead code and can
be eliminated, along with all its helper functions.
gcc/
2012-06-18 Ian Bolton <ian.bolton@arm.com>
Sameera Deshpande <sameera.deshpande@arm.com>
Greta Yorsh <greta.yorsh@arm.com>
Ian Bolton [Mon, 18 Jun 2012 17:57:06 +0000 (17:57 +0000)]
Add a new parameter to the function output_return_instruction to handle simple...
Add a new parameter to the function output_return_instruction to handle
simple cases of return when no epilogue needs to be printed out.
gcc/
2012-06-18 Ian Bolton <ian.bolton@arm.com>
Sameera Deshpande <sameera.deshpande@arm.com>
Greta Yorsh <greta.yorsh@arm.com>
* config/arm/arm-protos.h (output_return_instruction): New parameter and
int to bool change of parameter types.
* config/arm/arm.c (output_return_instruction): Likewise.
* config/arm/arm.md (arm_simple_return): New pattern.
(arm_return, cond_return, cond_return_inverted): Add new arguments.
* config/arm/thumb2.md (thumb2_return): Update condition and code.
Co-Authored-By: Greta Yorsh <greta.yorsh@arm.com> Co-Authored-By: Sameera Deshpande <sameera.deshpande@arm.com>
From-SVN: r188743
Ian Bolton [Mon, 18 Jun 2012 17:38:21 +0000 (17:38 +0000)]
Helper function for epilogue expansion.
Helper function for epilogue expansion. Emit RTL for APCS frame epilogue
(when -mapcs-frame command line option is specified).
This function is used by a later patch.
gcc/
2012-06-18 Ian Bolton <ian.bolton@arm.com>
Sameera Deshpande <sameera.deshpande@arm.com>
Greta Yorsh <greta.yorsh@arm.com>
* config/arm/arm.c (arm_expand_epilogue_apcs_frame): New function.
* config/arm/arm.md (arm_addsi3) Add an alternative.
Co-Authored-By: Greta Yorsh <greta.yorsh@arm.com> Co-Authored-By: Sameera Deshpande <sameera.deshpande@arm.com>
From-SVN: r188741
Ian Bolton [Mon, 18 Jun 2012 17:30:41 +0000 (17:30 +0000)]
New define insn pattern for epilogue with floating point registers (DFmode) and...
New define insn pattern for epilogue with floating point registers (DFmode)
and a new function that emits RTL for this pattern. This function is a
helper for epilogue extension. It is used by a later patch.
gcc/
2012-06-18 Ian Bolton <ian.bolton@arm.com>
Sameera Deshpande <sameera.deshpande@arm.com>
Greta Yorsh <greta.yorsh@arm.com>
* config/arm/arm.md (vfp_pop_multiple_with_writeback) New
define_insn.
* config/arm/predicates.md (pop_multiple_fp) New special predicate.
* config/arm/arm.c (arm_emit_vfp_multi_reg_pop): New function.
Co-Authored-By: Greta Yorsh <greta.yorsh@arm.com> Co-Authored-By: Sameera Deshpande <sameera.deshpande@arm.com>
From-SVN: r188740
Ian Bolton [Mon, 18 Jun 2012 17:24:25 +0000 (17:24 +0000)]
This patch adds new define_insn patterns for epilogue with integer
registers.
The patterns can handle pop multiple with writeback and return (loading into
PC directly).
To handle return, the patterns use a new special predicate
pop_multiple_return, that uses ldm_stm_operation_p function from a previous
patch. To output assembly, the patterns use a new function
arm_output_multireg_pop.
This patch also adds a new function arm_emit_multi_reg_pop
that emits RTL that matches the new pop patterns for integer registers.
This is a helper function for epilogue expansion. It is used by a later
patch.
2012-06-18 Ian Bolton <ian.bolton@arm.com>
Sameera Deshpande <sameera.deshpande@arm.com>
Greta Yorsh <greta.yorsh@arm.com>
* config/arm/arm.md (load_multiple_with_writeback) New define_insn.
(load_multiple, pop_multiple_with_writeback_and_return) Likewise.
(pop_multiple_with_return, ldr_with_return) Likewise.
* config/arm/predicates.md (pop_multiple_return) New special predicate.
* config/arm/arm-protos.h (arm_output_multireg_pop) New declaration.
* config/arm/arm.c (arm_output_multireg_pop) New function.
(arm_emit_multi_reg_pop): New function.
Co-Authored-By: Greta Yorsh <greta.yorsh@arm.com> Co-Authored-By: Sameera Deshpande <sameera.deshpande@arm.com>
From-SVN: r188739
Greta Yorsh [Mon, 18 Jun 2012 17:06:35 +0000 (18:06 +0100)]
This patch updates ldm_stm_operation_p to check for loads that if SP is in the register list...
This patch updates ldm_stm_operation_p to check for loads that if SP is in
the register list, then the base register is SP. It guarantees that SP is
reset correctly when an LDM instruction is interrupted. Otherwise, we might
end up with a corrupt stack.
gcc/
2012-06-18 Greta Yorsh <greta.yorsh@arm.com>
* config/arm/arm.c (ldm_stm_operation_p): Require SP
as base register for loads if SP is in the register list.
Steven Bosscher [Sun, 17 Jun 2012 21:12:24 +0000 (21:12 +0000)]
output.h (split_double): Move prototype to rtl.h.
* output.h (split_double): Move prototype to rtl.h.
(constructor_static_from_elts_p): Move prototype to tree.c.
* rtl.h (split_double): Moved here from output.h.
* tree.h (constructor_static_from_elts_p): Moved here from output.h.
* final.c (split_double): Move from here ...
* rtlanal.c (split_double): ... to here.
* expr.c: Do not include output.h.
Steven Bosscher [Sun, 17 Jun 2012 21:04:41 +0000 (21:04 +0000)]
cfgloop.h: Do not include rtl.h.
* cfgloop.h: Do not include rtl.h.
(enum iv_extend_code): New.
(struct rtx_iv): Use iv_extend_code instead of rtx_code.
* Makefile.in (CFGLOOP_H): Do not depend on RTL_H.
* loop-iv.c (iv_extend_to_rtx_code): New function to translate
an IV_EXTEND_CODE to an RTX_CODE.
(dump_iv_info): Update for rtx_iv field type change.
(iv_constant): Likewise.
(iv_subreg): Likewise.
(iv_extend): Likewise.
(iv_neg): Likewise.
(iv_add): Likewise.
(iv_mult): Likewise.
(iv_shift): Likewise.
(get_biv_step_1): Likewise.
(get_biv_step): Likewise.
(iv_analyze_biv): Likewise.
(get_iv_value): Likewise.
(shorten_into_mode): Likewise.
(canonicalize_iv_subregs): Likewise.
* sese.c (sese_build_liveouts): Use MAY_HAVE_DEBUG_STMTS instead
of MAY_HAVE_DEBUG_INSNS.
* tree-ssa-loop-ivopts.c: Include recog.h after expr.h.
* tree-ssa-loop-prefetch.c: Likewise.
Steven Bosscher [Sun, 17 Jun 2012 21:01:25 +0000 (21:01 +0000)]
expmed.c (ceil_log2): Move from here...
* expmed.c (ceil_log2): Move from here...
* hwint.c: ... to here for older GCCs...
* hwint.h: ... and here for newer GCCs.
* rtl.h (ceil_log2): Remove prototype.
* tree-phinodes.c: Do not include rtl.h.
* Makefile.in (tree-phinodes.o): Do not depend on RTL_H.
Uros Bizjak [Sun, 17 Jun 2012 13:54:53 +0000 (15:54 +0200)]
sfp-machine.h (FP_HANDLE_EXCEPTIONS): Use __builtin_expect when checking for exceptions.
* config/i386/sfp-machine.h (FP_HANDLE_EXCEPTIONS): Use
__builtin_expect when checking for exceptions.
* config/ia64/sfp-machine.h (FP_HANDLE_EXCEPTIONS): Ditto.
Tobias Burnus [Sat, 16 Jun 2012 18:13:38 +0000 (20:13 +0200)]
re PR fortran/53642 (Front-end optimization: Wrong string length for deferred-length strings)
2012-06-16 Tobias Burnus <burnus@net-b.de>
PR fortran/53642
PR fortran/45170
* frontend-passes.c (optimize_assignment): Don't remove RHS's
trim when assigning to a deferred-length string.
* trans-expr.c (gfc_trans_assignment_1): Ensure that the RHS string
length is evaluated before the deferred-length LHS is reallocated.
Janis Johnson [Fri, 15 Jun 2012 19:45:54 +0000 (19:45 +0000)]
gcov.exp (verify-lines, [...]): Use testname that includes flags, passed in as new argument, in pass/fail messages.
* lib/gcov.exp (verify-lines, verify-branches, verify-calls): Use
testname that includes flags, passed in as new argument, in
pass/fail messages.
(run_gcov): Get testname from dg-test, use it in pass/fail messages
and pass it to verify-* procedures.
Georg-Johann Lay [Fri, 15 Jun 2012 15:56:02 +0000 (15:56 +0000)]
avr.c (avr_default_expand_builtin): New function.
* config/avr/avr.c (avr_default_expand_builtin): New function.
(avr_expand_builtin): Use it.
(avr_expand_unop_builtin): Remove.
(avr_expand_binop_builtin): Remove.
(avr_expand_triop_builtin): Remove.
Michael Matz [Fri, 15 Jun 2012 14:56:26 +0000 (14:56 +0000)]
re PR middle-end/38474 (compile time explosion in dataflow_set_preserve_mem_locs at -O3)
PR middle-end/38474
* cfgexpand.c (add_alias_set_conflicts): Remove.
(expand_used_vars): Don't call it.
(aggregate_contains_union_type): Remove.
* function.c (n_temp_slots_in_use): New static data.
(make_slot_available, assign_stack_temp_for_type): Update it.
(init_temp_slots): Zero it.
(remove_unused_temp_slot_addresses): Use it for quicker removal.
(remove_unused_temp_slot_addresses_1): Use htab_clear_slot.
Michael Matz [Fri, 15 Jun 2012 14:46:36 +0000 (14:46 +0000)]
gimplify.c (gimplify_compound_literal_expr): Take gimple_test_f argument...
* gimplify.c (gimplify_compound_literal_expr): Take gimple_test_f
argument, don't emit assign statement if value is directly usable.
(gimplify_expr): Adjust.
testsuite/
* gcc.dg/tree-ssa/vector-4.c: New test.
Richard Guenther [Fri, 15 Jun 2012 13:38:17 +0000 (13:38 +0000)]
tree-vrp.c (set_and_canonicalize_value_range): Use canonical predicates to set VR_UNDEFINED and VR_VARYING.
2012-06-15 Richard Guenther <rguenther@suse.de>
* tree-vrp.c (set_and_canonicalize_value_range): Use canonical
predicates to set VR_UNDEFINED and VR_VARYING. Drop a case
we assert for in set_value_range to VR_VARYING.
Jakub Jelinek [Fri, 15 Jun 2012 11:07:47 +0000 (13:07 +0200)]
re PR tree-optimization/51581 (Integer division by constant is not vectorized)
PR tree-optimization/51581
* expr.h (choose_multiplier): New prototype.
* expmed.c (choose_multiplier): No longer static.
Change multiplier_ptr from rtx * to UHWI *.
(expand_divmod): Adjust callers.
* tree-vect-patterns.c (vect_recog_sdivmod_pow2_pattern):
Renamed to...
(vect_recog_divmod_pattern): ... this. Pass bb_vinfo as last
argument to new_stmt_vec_info. Attempt to optimize also divisions
by non-pow2 constants if integer vector division isn't supported.
* tree-vect-stmts.c (vect_analyze_stmt): If node != NULL,
don't look at pattern stmts and sequences.
* gcc.c-torture/execute/pr51581-1.c: New test.
* gcc.c-torture/execute/pr51581-2.c: New test.
* gcc.dg/vect/pr51581-1.c: New test.
* gcc.dg/vect/pr51581-2.c: New test.
* gcc.dg/vect/pr51581-3.c: New test.
* gcc.target/i386/avx-pr51581-1.c: New test.
* gcc.target/i386/avx-pr51581-2.c: New test.
* gcc.target/i386/avx2-pr51581-1.c: New test.
* gcc.target/i386/avx2-pr51581-2.c: New test.
* gcc.dg/vect/slp-26.c (main1): Divide by 0x8031 instead of 3.
Eric Botcazou [Fri, 15 Jun 2012 10:41:13 +0000 (10:41 +0000)]
re PR ada/53592 (ICE on assignment to component of vector_type)
PR ada/53592
* gcc-interface/gigi.h (maybe_vector_array): Make static inline.
* gcc-interface/utils.c (maybe_vector_array): Delete.
* gcc-interface/trans.c (gnat_to_gnu) <N_Indexed_Component>: Mark the
array object as addressable if it has vector type and is on the LHS.
Eric Botcazou [Fri, 15 Jun 2012 09:22:00 +0000 (09:22 +0000)]
re PR middle-end/53590 (compiler fails to generate SIMD instruction for FP division)
PR middle-end/53590
* common.opt (-fdelete-dead-exceptions): New switch.
* doc/invoke.texi (Code Gen Options): Document it.
* cse.c (count_reg_usage) <CALL_INSN>: Use !insn_nothrow_p in lieu of
insn_could_throw_p predicate. Do not skip an insn that could throw
if dead exceptions can be deleted.
(insn_live_p): Likewise, do not return true in that case.
* dce.c (can_alter_cfg): New flag.
(deletable_insn_p): Do not return false for an insn that can throw if
the CFG can be altered and dead exceptions can be deleted.
(init_dce): Set can_alter_cfg to false for fast DCE, true otherwise.
* dse.c (scan_insn): Use !insn_nothrow_p in lieu of insn_could_throw_
predicate. Do not preserve an insn that could throw if dead exceptions
can be deleted.
* function.h (struct function): Add can_delete_dead_exceptions flag.
* function.c (allocate_struct_function): Set it.
* lto-streamer-in.c (input_struct_function_base): Stream it.
* lto-streamer-out.c (input_struct_function_base): Likewise.
* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Do not mark a
statement that could throw as necessary if dead exceptions can be
deleted.
ada/
* gcc-interface/misc.c (gnat_init_options_struct): Set
opts->x_flag_delete_dead_exceptions to 1.
Jonathan Wakely [Thu, 14 Jun 2012 22:20:52 +0000 (22:20 +0000)]
re PR libstdc++/53270 (Error when bootstrapping gcc on hppa2.0-unknown-linux-gcc)
PR libstdc++/53270
* include/ext/concurrence.h (__mutex, __recursive_mutex, __cond): Use
NSDMI in C++11 mode.
* include/ext/rope (_Refcount_Base): Likewise. Destroy mutex in
destructor when initialized by function.
Jonathan Wakely [Thu, 14 Jun 2012 22:07:33 +0000 (22:07 +0000)]
re PR libstdc++/53648 ([C++11] nested empty tuples)
PR libstdc++/53648
* include/std/tuple (__empty_not_final): Do not use EBO for tuples.
* testsuite/20_util/tuple/53648.cc: New.
* testsuite/20_util/uses_allocator/cons_neg.cc: Adjust dg-error line
number.
Eric Botcazou [Thu, 14 Jun 2012 14:09:05 +0000 (14:09 +0000)]
dwarf2out.c (function_possibly_abstracted_p): New static function.
* dwarf2out.c (function_possibly_abstracted_p): New static function.
(gen_subprogram_die): Use it function_possibly_abstracted_p in lieu of
cgraph_function_possibly_inlined_p.
(gen_inlined_subroutine_die): Return if the origin is to be ignored.
(process_scope_var): Do not emit concrete instances of abstracted
nested functions from here.
(gen_decl_die): Emit the abstract instance if the function is possibly
abstracted and not only possibly inlined.
(dwarf2out_finish): Find the first non-abstract parent instance and
attach concrete instances on the limbo list to it.
Jose Ruiz [Thu, 14 Jun 2012 12:48:22 +0000 (12:48 +0000)]
Make-lang.in (ada.install-common, [...]): Use the prefix specified with the --program-prefix configure option to...
2012-06-14 Jose Ruiz <ruiz@adacore.com>
* gcc-interface/Make-lang.in (ada.install-common, ada.uninstall):
Use the prefix specified with the --program-prefix configure option
to determine the install name of the Ada tools.
(ada.all.cross): Use a for loop to iterate over the set of Ada tools
instead of duplicate the same processing.
Update dependencies.
Bill Schmidt [Thu, 14 Jun 2012 12:21:36 +0000 (12:21 +0000)]
tree-vectorizer.h (vect_get_stmt_cost): Move from tree-vect-stmts.c.
2012-06-14 Bill Schmidt <wschmidt@linux.ibm.com>
* tree-vectorizer.h (vect_get_stmt_cost): Move from tree-vect-stmts.c.
(cost_for_stmt): Remove decl.
(vect_get_single_scalar_iteration_cost): Correct typo in name.
* tree-vect-loop.c (vect_get_cost): Remove.
(vect_get_single_scalar_iteration_cost): Correct typo in name; use
vect_get_stmt_cost rather than vect_get_cost.
(vect_get_known_peeling_cost): Use vect_get_stmt_cost rather than
vect_get_cost.
(vect_estimate_min_profitable_iters): Correct typo in call to
vect_get_single_scalar_iteration_cost; use vect_get_stmt_cost rather
than vect_get_cost.
(vect_model_reduction_cost): Use vect_get_stmt_cost rather than
vect_get_cost.
(vect_model_induction_cost): Likewise.
* tree-vect-data-refs.c (vect_peeling_hash_get_lowest_cost): Correct
typo in call to vect_get_single_scalar_iteration_cost.
* tree-vect-stmts.c (vect_get_stmt_cost): Move to tree-vectorizer.h.
(cost_for_stmt): Remove unnecessary function.
* Makefile.in (TREE_VECTORIZER_H): Update dependencies.
Arnaud Charlet [Thu, 14 Jun 2012 10:56:22 +0000 (12:56 +0200)]
[multiple changes]
2012-06-14 Vincent Pucci <pucci@adacore.com>
* exp_ch6.adb (Expand_Call): Expand_Put_Call_With_Dimension_Symbol
call replaced by Expand_Put_Call_With_Symbol call.
* sem_dim.adb: New fields Unit_Names, Unit_Symbols
and Dim_Symbols for record type System_Type.
(From_Dimension_To_String_Of_Symbols): Removed.
(From_Dim_To_Str_Of_Dim_Symbols): Renames previous
routine From_Dimension_To_String_Of_Symbols.
(From_Dim_To_Str_Of_Unit_Symbols): New routine.
(Analyze_Aspect_Dimension): argument Symbol in aspect
Dimension aggregate is optional. Named association implemented.
(Has_Compile_Time_Known_Expressions): Removed.
(Analyze_Aspect_Dimension_System): New
component Dim_Symbol in each Dimension aggregate in
aspect Dimension_System. Named associations implemented.
(Add_Dimension_Vector_To_Buffer): Removed.
(Add_Whole_To_Buffer): Removed.
(Expand_Put_Call_With_Dimension_Symbol.): Removed.
(Expand_Put_Call_With_Symbol): Renames previous routine
Expand_Put_Call_With_Dimension_Symbol.
(Has_Dimension_Symbols): Removed.
(Has_Symbols): Renames previous routine
Has_Dimension_Symbols. (Store_String_Oexpon): New routine.
* sem_dim.ads (Expand_Put_Call_With_Dimension_Symbol.): Removed.
(Expand_Put_Call_With_Symbol): Renames previous routine
Expand_Put_Call_With_Dimension_Symbol.
* s-diflio.adb, s-diinio.adb (Put): Symbol renames Symbols.
(Put_Dim_Of): New routines.
* s-diflio.ads, s-diinio.ads: documentation updated.
(Put): Symbol renames Symbols.
(Put_Dim_Of): New routines.
* s-dim.ads: documentation updated.
* s-dimmks.ads: dimensioned type and subtypes updated.
* snames.ads-tmpl: Name_Dim_Symbol, Name_Put_Dim_Of, Name_Symbol,
and Name_Unit_Symbol added. Name_Symbols removed.
2012-06-14 Vincent Pucci <pucci@adacore.com>
* freeze.adb (In_Exp_Body): Expression function case added.
(Freeze_Expression): Insert the Freeze_Nodes
list before the correct current scope in case of a quantified
expression.
2012-06-14 Pascal Obry <obry@adacore.com>
* projects.texi: Document the Install package for gprinstall.
2012-06-14 Ed Schonberg <schonberg@adacore.com>
* sem_elim.adb (Check_For_Eliminated_Subprogram): Do not check within
a default expression.
* sem_res.adb (Resolve_Call): simplify code.
2012-06-14 Ed Schonberg <schonberg@adacore.com>
* sem_case.adb (Check, Issue_Msg): within an instance, non-other
values in a variant part or a case expression do not have to
belong to the actual subtype.
2012-06-14 Ed Schonberg <schonberg@adacore.com>
* sem_ch12.adb (Validate_Derived_Type_Instance): If parent is
an interface type, check whether it is itself a previous formal
already instantiated in the current list of actuals.
2012-06-14 Ed Schonberg <schonberg@adacore.com>
* sem_ch13.adb (Check_Aspect_At_End_Of_Declarations): The
expression for a stream attribute is a name that may be overloaded
with other declarations. To determine whether it matches the
aspect at the freeze point, it is necessary to verify that one
of its interpretations matches.
projects / thirdparty / gcc.git / log
