Marek Polacek [Thu, 29 Jan 2015 21:02:21 +0000 (21:02 +0000)]
re PR c/64709 (Bogus -Wmissing-field-initializers warning)
PR c/64709
* c-typeck.c (pop_init_level): If constructor_elements has
exactly one element with integer_zerop value, set constructor_zeroinit
to 1. Remove braces around warning_init call.
Jeff Law [Thu, 29 Jan 2015 14:30:45 +0000 (07:30 -0700)]
re PR target/15184 (Direct access to byte inside word not working with -march=pentiumpro)
PR target/15184
* combine.c (try_combine): If I0 is a memory load and I3 a store
to a related address, increase the "goodness" of doing a 4-insn
combination with I0-I3.
(make_field_assignment): Handle SUBREGs in the ior+and case.
PR target/15184
* gcc.target/i386/pr15184-1.c: New test.
* gcc.target/i386/pr15184-2.c: New test.
Yuri Rumyantsev [Thu, 29 Jan 2015 13:52:28 +0000 (13:52 +0000)]
re PR tree-optimization/64746 (Loop with nested load/stores is not vectorized using aggressive if-conversion.)
gcc/
PR tree-optimization/64746
* tree-if-conv.c (mask_exists): New function.
(predicate_mem_writes): Save created mask with given size for further
use.
(stmt_is_root_of_bool_pattern): Remove argument VAR and store to it.
(ifcvt_repair_bool_pattern): Collect all statements that are root
of bool pattern and use iterative algorithm to remove multiple uses
of predicates, display number of required iterations.
gcc/testsuite/
PR tree-optimization/64746
* gcc.target/i386/avx2-vect-aggressive-1.c: New test.
Richard Biener [Thu, 29 Jan 2015 13:50:37 +0000 (13:50 +0000)]
re PR tree-optimization/64853 (wrong code at -Os and above on x86_64-linux-gnu)
2015-01-29 Richard Biener <rguenther@suse.de>
PR tree-optimization/64853
* tree-vrp.c (vrp_valueize_1): Do not return anything if the
stmt will get simulated again.
* tree-ssa-ccp.c (valueize_op_1): Likewise.
Kyrylo Tkachov [Thu, 29 Jan 2015 13:36:22 +0000 (13:36 +0000)]
[ARM][cleanup] Simplify some expressions in some epilogue-related functions
* config/arm/arm.c (arm_emit_multi_reg_pop): Simplify definition of
return_in_pc. Remove redundant assignments.
(thumb2_emit_ldrd_pop): Simplify definition of return_in_pc.
(arm_expand_epilogue): Don't compare boolean with true in if condition.
Jonathan Wakely [Thu, 29 Jan 2015 12:47:20 +0000 (12:47 +0000)]
atomic_base.h: Use __always_inline__ instead of always_inline.
* include/bits/atomic_base.h: Use __always_inline__ instead of
always_inline.
* include/bits/atomic_futex.h: Likewise.
* include/bits/c++config: Use __abi_tag__ instead of abi_tag.
* include/ext/pb_ds/detail/gp_hash_table_map_/gp_ht_map_.hpp: Use
__packed__ instead of packed.
* include/std/shared_mutex: Use __unused__ instead of unused.
* testsuite/17_intro/headers/c++1998/all_attributes.cc: New.
* testsuite/17_intro/headers/c++200x/all_attributes.cc: New.
* testsuite/17_intro/headers/c++2014/all_attributes.cc: New.
Ilya Enkovich [Thu, 29 Jan 2015 12:24:06 +0000 (12:24 +0000)]
i386-protos.h (ix86_use_pseudo_pic_reg): New.
* config/i386/i386-protos.h (ix86_use_pseudo_pic_reg): New.
* config/i386/i386.h (PIC_OFFSET_TABLE_REGNUM): Simplify by
using x86_use_pseudo_pic_reg.
* config/i386/i386.c (ix86_conditional_register_usage): Remove
support for fixed PIC register.
(ix86_use_pseudo_pic_reg): Not static any more.
Caroline Tice [Thu, 29 Jan 2015 08:03:56 +0000 (00:03 -0800)]
Committing VTV Cygwin patch for Patrick Wollgast
* gcc/config/i386/cygwin.h (STARTFILE_SPEC): Add vtv_start.o,
if -fvtable-verify=preinit/std is used.
* gcc/config/i386/mingw-w64.h (STARTFILE_SPEC): Likewise.
* gcc/config/i386/mingw32.h (STARTFILE_SPEC): Likewise.
* gcc/config/i386/cygwin.h (ENDFILE_SPEC): Add vtv_end.o,
if -fvtable-verify=preinit/std is used.
* gcc/config/i386/mingw32.h (ENDFILE_SPEC): Likewise.
* gcc/config/i386/cygwin.h (LIB_SPEC): Pass -lvtv and -lpsapi,
if -fvtable-verify=preinit/std is used.
* gcc/config/i386/mingw-w64.h (LIB_SPEC): Likewise.
* gcc/config/i386/mingw32.h (LIB_SPEC): Likewise.
* gcc/cp/vtable-class-hierarchy.c (vtv_generate_init_routine): Add
check for not TARGET_PECOFF at the VTV_PREINIT_PRIORITY checks.
* gcc/varasm.c (assemble_variable): Add code to properly set the comdat
section and name for the .vtable_map_vars section in case the
target is PE or COFF.
* libgcc/Makefile.in: Move rules to build vtv_*.o out of the check
for CUSTOM_CRTSTUFF.
* libgcc/config.host (i[34567]86-*-cygwin*, x86_64-*-cygwin*, i[34567]86-*-mingw*)
(x86_64-*-mingw*): Only add vtv_*.o to extra_parts if enable_vtable_verify.
* libstdc++-v3/libsupc++/Makefile.am: Add vtv_sources only to
libsupc___la_SOURCES and libsupc__convenience_la_SOURCES if VTV_CYGMIN is
not set.
* libstdc++-v3/libsupc++/Makefile.in: Regenerated.
* libstdc++-v3/libsupc++/vtv_stubs.cc: Add none weak declaration of every
function for Cygwin and MinGW.
* libstdc++-v3/src/Makefile.am: Add libvtv.la to toolexeclib_LTLIBRARIES,
if VTV_CYGMIN is set. Define libvtv_la_SOURCES, libvtv_la_LDFLAGS,
libvtv_la_AM_CXXFLAGS and libvtv_la_LINK if VTV_CYGMIN is set.
* libstdc++-v3/src/Makefile.in: Regenerate.
* libvtv/Makefile.am : Add libvtv.la to toolexeclib_LTLIBRARIES, if VTV_CYGMIN
is set. Define libvtv_la_LIBADD, libvtv_la_LDFLAGS, libvtv_stubs_la_LDFLAGS
and libvtv_stubs_la_SOURCES if VTV_CYGMIN is set. Add obstac.c to
libvtv_la_SOURCES if VTV_CYGMIN is set.
* libvtv/Makefile.in : Regenerate.
* libvtv/aclocal.m4 : Regenerate.
* libvtv/configure : Regenerate.
* libvtv/configure.ac : Add ACX_LT_HOST_FLAGS. Define VTV_CYGMIN.
* libvtv/configure.tgt : (x86_64-*-cygwin*, i?86-*-cygwin*, x86_64-*-mingw*)
(i?86-*-mingw*): Add to supported targets.
* libvtv/vtv_fail.cc : Skip inclusion of execinfo.h on Cygwin and MinGW.
(log_error_message): Skip calls to backtrace and backtrace_symbols_fd on Cygwin
and MinGW.
* libvtv/vtv_malloc.cc : Include windows.h and skip sys/mman.h inclusion on
Cygwin and MinGW. Add sysconf port on Cygwin and MinGW.
(obstack_chunk_alloc): Exchange call to mmap with call to VirtualAlloc on Cygwin
and MinGW.
(__vtv_malloc_init): Exchange call to sysconf with call to port of sysconf on
Cygwin and MinGW.
* libvtv/vtv_malloc.h : Declare mprotect and define PROT_READ and PROT_WRITE on
Cygwin and MinGW.
* libvtv/map.h : Include stdint.h on MinGW.
* libvtv/rts.cc : Include windows.h, winternl.h and psapi.h, skip include of
execinfo.h, sys/mman.h and link.h on Cygwin and MinGW.
Add port of __fortify_fail on Cygwin and MinGW.
Change ElfW (Addr) to uintptr_t on Cygwin and MinGW.
(read_section_offset_and_length): Add port for Cygwin and MinGW
(iterate_modules): New function.
(vtv_unprotect_vtable_vars): Use iterate_modules instead of dl_iterate_phdr on
Cygwin and MinGW.
(vtv_protect_vtable_vars): Likewise.
(count_all_pages): Likewise.
(dl_iterate_phdr_count_pages): Don't build on Cygwin and MinGW.
* libvtv/utils.cc : Include windows.h and skip execinfo.h inclusion on
Cygwin and MinGW.
(__vtv_open_log): Exchange call to getuid and getpid with GetCurrentProcessId and
adjust call to snprintf accordingly on Cygwin and MinGW.
Adjust calls to mkdir on MinGW.
Adjust call to open on Cygwin and MinGW.
(__vtv_add_to_log): Adjust call to snprintf on Cygwin and MinGW.
(__vtv_log_verification_failure): Don't generate a backtrace on Cygwin and MinGW.
Jack Howarth [Wed, 28 Jan 2015 21:25:19 +0000 (21:25 +0000)]
re PR libgomp/64635 (darwin produces libgomp-plugin-host_nonshm.1.dylib but tries to load libgomp-plugin-host_nonshm.so.1)
2015-01-28 Jack Howarth <howarth.at.gcc@gmail.com>
PR libgomp/64635
* configure.tgt (*-*-aix*): Use config_path "aix posix".
(*-*-darwin*): Use config_path "bsd darwin posix".
(*-*-hpux*): Use config_path "hpux posix".
* target.c: Add include of plugin-suffix.h and use
SONAME_SUFFIX macro.
* config/aix/plugin-suffix.h: New file.
* config/darwin/plugin-suffix.h: New file.
* config/hpux/plugin-suffix.h: New file.
* config/posix/plugin-suffix.h: New file.
Jack Howarth [Wed, 28 Jan 2015 21:23:14 +0000 (21:23 +0000)]
re PR libgomp/64635 (darwin produces libgomp-plugin-host_nonshm.1.dylib but tries to load libgomp-plugin-host_nonshm.so.1)
2015-01-28 Jack Howarth <howarth.at.gcc@gmail.com>
PR libgomp/64635
* configure.tgt (*-*-aix*): Use config_path "aix posix".
(*-*-darwin*): Use config_path "bsd darwin posix".
(*-*-hpux*): Use config_path "hpux posix".
* target.c: Add include of plugin-suffix.h and use
SONAME_SUFFIX macro.
* config/aix/plugin-suffix.h: New file.
* config/darwin/plugin-suffix.h: New file.
* config/hpux/plugin-suffix.h: New file.
* config/posix/plugin-suffix.h: New file.
Oleg Endo [Wed, 28 Jan 2015 21:11:37 +0000 (21:11 +0000)]
re PR target/64659 ([SH] Immedate values not used for atomic ops)
gcc/
PR target/64659
* config/sh/predicates.md (atomic_arith_operand,
atomic_logical_operand): Remove.
* config/sh/sync.md (fetchop_predicate, fetchop_constraint): Remove.
(atomic_arith_operand_0): New predicate.
(atomic_compare_and_swap<mode>): Use arith_reg_dest for output values.
Use atomic_arith_operand_0 for input values.
(atomic_compare_and_swapsi_hard, atomic_compare_and_swap<mode>_hard,
atomic_compare_and_swap<mode>_soft_gusa,
atomic_compare_and_swap<mode>_soft_tcb,
atomic_compare_and_swap<mode>_soft_imask): Use arith_reg_dest and
arith_reg_operand instead of register_operand.
(atomic_exchange<mode>): Use arith_reg_dest for output value. Use
atomic_arith_operand_0 for newval input.
(atomic_exchangesi_hard, atomic_exchange<mode>_hard,
atomic_exchange<mode>_soft_gusa, atomic_exchange<mode>_soft_tcb,
atomic_exchange<mode>_soft_imask): Use arith_reg_dest and
arith_reg_operand instead of register_operand.
(atomic_arith_operand_1, atomic_logical_operand_1): New predicates.
fetchop_predicate_1, fetchop_constraint_1_llcs,
fetchop_constraint_1_gusa, fetchop_constraint_1_tcb,
fetchop_constraint_1_imask): New code iterator attributes.
(atomic_fetch_<fetchop_name><mode>): Use arith_reg_dest instead of
register_operand. Use fetchop_predicate_1.
(atomic_fetch_<fetchop_name>si_hard,
atomic_fetch_<fetchop_name><mode>_hard): Use arith_reg_dest instead of
register_operand. Use fetchop_predicate_1, fetchop_constraint_1_llcs.
(atomic_fetch_<fetchop_name><mode>_soft_gusa): Use arith_reg_dest
and arith_reg_operand instead of register_operand. Use
fetchop_predicate_1, fetchop_constraint_1_gusa.
(atomic_fetch_<fetchop_name><mode>_soft_tcb): Use arith_reg_dest
and arith_reg_operand instead of register_operand. Use
fetchop_predicate_1, fetchop_constraint_1_tcb. Adjust asm sequence
to allow R0 usage.
(atomic_fetch_<fetchop_name><mode>_soft_imask): Use arith_reg_dest
and arith_reg_operand instead of register_operand. Use
fetchop_predicate_1, fetchop_constraint_1_imask. Adjust asm sequence
to allow R0 usage.
(atomic_fetch_nand<mode>): Use arith_reg_dest instead of
register_operand. Use atomic_logical_operand_1.
(atomic_fetch_nandsi_hard, atomic_fetch_nand<mode>_hard,
atomic_fetch_nand<mode>_soft_gusa): Use arith_reg_dest and
arith_reg_operand instead of register_operand.
(atomic_fetch_nand<mode>_soft_tcb, atomic_fetch_nand<mode>_soft_imask):
Use arith_reg_dest and arith_reg_operand instead of register_operand.
Use logical_operand and rK08. Adjust asm sequence to allow R0 usage.
(atomic_<fetchop_name>_fetch<mode>): Use arith_reg_dest instead of
register_operand. Use fetchop_predicate_1.
(atomic_<fetchop_name>_fetchsi_hard,
atomic_<fetchop_name>_fetch<mode>_hard): Use arith_reg_dest and
arith_reg_operand instead of register_operand. Use fetchop_predicate_1,
fetchop_constraint_1_llcs.
(atomic_<fetchop_name>_fetch<mode>_soft_gusa): Use arith_reg_dest and
arith_reg_operand instead of register_operand. Use fetchop_predicate_1,
fetchop_constraint_1_gusa.
(atomic_<fetchop_name>_fetch<mode>_soft_tcb): Use arith_reg_dest and
arith_reg_operand instead of register_operand. Use fetchop_predicate_1,
fetchop_constraint_1_tcb. Adjust asm sequence to allow R0 usage.
(atomic_<fetchop_name>_fetch<mode>_soft_imask): Use arith_reg_dest and
arith_reg_operand instead of register_operand. Use fetchop_predicate_1,
fetchop_constraint_1_imask. Adjust asm sequence to allow R0 usage.
(atomic_nand_fetch<mode>): Use arith_reg_dest instead of
register_operand. Use atomic_logical_operand_1.
(atomic_nand_fetchsi_hard, atomic_nand_fetch<mode>_hard,
atomic_nand_fetch<mode>_soft_gusa): Use arith_reg_dest and
arith_reg_operand instead of register_operand.
(atomic_nand_fetch<mode>_soft_tcb): Use arith_reg_dest and
arith_reg_operand instead of register_operand. Use logical_operand
and K08. Adjust asm sequence to allow R0 usage.
(atomic_nand_fetch<mode>_soft_imask): Use arith_reg_dest and
arith_reg_operand instead of register_operand. Use logical_operand
and K08.
Jakub Jelinek [Wed, 28 Jan 2015 20:30:30 +0000 (21:30 +0100)]
re PR other/63504 (Issues found by --enable-checking=valgrind)
PR other/63504
* dwarf2out.c (add_AT_wide, mem_loc_descriptor, loc_descriptor):
Use ggc_alloc<wide_int> instead of ggc_cleared_alloc<wide_int>.
(attr_checksum, attr_checksum_ordered, hash_loc_operands): Checksum
only get_full_len HOST_WIDE_INTs from get_val () array rather than
all bits in *val_wide.
Bruce Korb [Wed, 28 Jan 2015 20:21:34 +0000 (20:21 +0000)]
checksums and test-text
* fixincl.tpl: add a check sum acceptance test
* fixlib.h: enumerate it
* fixincl.c: handle it
* README: document it and document the handling of test_text
Thomas Schwinge [Wed, 28 Jan 2015 17:03:44 +0000 (18:03 +0100)]
nvptx mkoffload.
gcc/
* config/nvptx/mkoffload.c: New file.
* config/nvptx/t-nvptx: Add build rules for it.
* config.gcc <nvptx-*> [$enable_as_accelerator = yes]
(extra_programs): Add mkoffload.
* config/nvptx/nvptx.c (nvptx_record_offload_symbol): New
function.
(TARGET_RECORD_OFFLOAD_SYMBOL): Define macro to use it.
Jonathan Wakely [Wed, 28 Jan 2015 15:02:28 +0000 (15:02 +0000)]
re PR libstdc++/64828 (libstdc++-v3/libsupc++/del_opvs.cc:30:1: warning: ‘void operator delete [](void*, std::size_t)’ is a usual (non-placement) deallocation function in C++14 (or with -fsized-deallocation) [-Wc++14-compat])
re PR tree-optimization/64718 (Bad 16-bit bswap replacement)
2015-01-28 Thomas Preud'homme <thomas.preudhomme@arm.com>
gcc/
PR tree-optimization/64718
* tree-ssa-math-opts.c (pass_optimize_bswap::execute): Make bswap_type
be a 16bit unsigned integer when n->range is 16.
(bswap_replace): Convert src to that type if necessary for all bswap
sizes. Fix rotation right notation in nearby comment. Use bswap_type
set in pass_optimize_bswap::execute ().
gcc/testsuite/
PR tree-optimization/64718
* gcc.c-torture/execute/pr64718.c: New test.
David Malcolm [Tue, 27 Jan 2015 20:19:36 +0000 (20:19 +0000)]
toplev: gcc version information for jit
gcc/ChangeLog:
* toplev.c (print_version): Add param "show_global_state", and
only print GGC and plugin information if it is true.
(init_asm_output): Pass in "true" for the new param when calling
print_version.
(process_options): Likewise.
(toplev::main): Likewise.
* toplev.h (print_version): Add new param to decl.
gcc/jit/ChangeLog:
* docs/internals/test-hello-world.exe.log.txt: Add example version
lines.
* jit-common.h (gcc::jit::dump::get_file): New accessor.
* jit-logging.c: Include toplev.h.
(gcc::jit::logger::logger): Log the GCC version.
* jit-recording.c: Include toplev.h.
(gcc:jit::recording::context::dump_reproducer_to_file): Log the
GCC version.
Dominik Vogt [Tue, 27 Jan 2015 15:26:16 +0000 (15:26 +0000)]
extend.texi: s/390: Update documentation of hotpatch attribute.
2015-01-27 Dominik Vogt <vogt@linux.vnet.ibm.com>
* doc/extend.texi: s/390: Update documentation of hotpatch attribute.
* doc/invoke.texi (-mhotpatch): s/390: Update documentation of
-mhotpatch= option.
* config/s390/s390.opt (mhotpatch): s/390: Remove -mhotpatch and
-mno-hotpatch options. Change syntax of -mhotpatch= option.
* config/s390/s390.c (s390_hotpatch_trampoline_halfwords_default):
Renamed.
(s390_hotpatch_trampoline_halfwords_max): Renamed.
(s390_hotpatch_hw_max): New name.
(s390_hotpatch_trampoline_halfwords): Renamed.
(s390_hotpatch_hw_before_label): New name.
(get_hotpatch_attribute): Removed.
(s390_hotpatch_hw_after_label): New name.
(s390_handle_hotpatch_attribute): Add second parameter to hotpatch
attribute.
(s390_attribute_table): Ditto.
(s390_function_num_hotpatch_trampoline_halfwords): Renamed.
(s390_function_num_hotpatch_hw): New name.
Remove special handling of inline functions and hotpatching.
Return number of nops before and after the function label.
(s390_can_inline_p): Removed.
(s390_asm_output_function_label): Emit a configurable number of nops
after the function label.
(s390_option_override): Update -mhotpatch= syntax and remove -mhotpatch.
(TARGET_CAN_INLINE_P) Removed.
(TARGET_FUNCTION_ATTRIBUTE_INLINABLE_P): New.
2015-01-27 Dominik Vogt <vogt@linux.vnet.ibm.com>
* gcc/testsuite/gcc.target/s390/hotpatch-13.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-14.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-15.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-16.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-17.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-18.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-19.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-20.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-10.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-11.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-12.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-13.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-14.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-15.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-16.c: New testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-9.c: New
testcase.
* gcc/testsuite/gcc.target/s390/hotpatch-1.c: Testcase adjusted to
new -mhotpatch.
* gcc/testsuite/gcc.target/s390/hotpatch-10.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-11.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-12.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-2.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-3.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-4.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-5.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-6.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-7.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-8.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-9.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-1.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-2.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-3.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-4.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-5.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-6.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-7.c: Likewise.
* gcc/testsuite/gcc.target/s390/hotpatch-compile-8.c: Likewise.
Nick Clifton [Tue, 27 Jan 2015 11:37:08 +0000 (11:37 +0000)]
rl78.c (rl78_expand_prologue): In G10 mode push the BC, DE and HL registers directly, not via AX.
* config/rl78/rl78.c (rl78_expand_prologue): In G10 mode push the
BC, DE and HL registers directly, not via AX.
When decrementing the stack pointer by a large amount, transfer SP
into AX and perform the subtraction there.
(rl78_expand_epilogue): Perform the inverse of the above
enhancements.
Nick Clifton [Tue, 27 Jan 2015 11:36:01 +0000 (11:36 +0000)]
cmpsi2.S: Use function start and end macros.
* config/rl78/cmpsi2.S: Use function start and end macros.
(__gcc_bcmp): New function.
* config/rl78/lshrsi3.S: Use function start and end macros.
* config/rl78/mulsi3.S: Add support for G10.
(__mulqi3): New function for G10.
* config/rl78/signbit.S: Use function start and end macros.
* config/rl78/t-rl78 (LIB2ADD): Add bit-count.S, fpbit-sf.S and
fpmath-sf.S.
(LIB2FUNCS_EXCLUDE): Define.
(LIB2FUNCS_ST): Define.
* config/rl78/trampoline.S: Use function start and end macros.
* config/rl78/vregs.h (START_FUNC): New macro.
(START_ANOTHER_FUNC): New macro.
(END_FUNC): New macro.
(END_ANOTHER_FUNC): New macro.
* config/rl78/bit-count.S: New file. Contains assembler
implementations of the bit counting functions: ___clzhi2,
__clzsi2, ctzhi2, ctzsi2, ffshi2, ffssi2, __partityhi2,
__paritysi2, __popcounthi2 and __popcountsi2.
* config/rl78/fpbit-sf.S: New file. Contains assembler
implementationas of the math functions: __negsf2, __cmpsf2,
__eqsf2, __nesf2, __lesf2, __ltsf2, __gesf2, gtsf2, __unordsf2,
__fixsfsi, __fixunssfsi, __floatsisf and __floatunssisf.
* config/rl78/fpmath-sf.S: New file. Contains assembler
implementations of the math functions: __subsf3, __addsf3,
__mulsf3 and __divsf3
Richard Biener [Tue, 27 Jan 2015 09:49:29 +0000 (09:49 +0000)]
re PR tree-optimization/56273 (Bogus -Warray-bounds warning)
2015-01-27 Richard Biener <rguenther@suse.de>
PR tree-optimization/56273
PR tree-optimization/59124
PR tree-optimization/64277
* tree-vrp.c (vrp_finalize): Emit array-bound warnings only
from the first VRP pass.
* g++.dg/warn/Warray-bounds-6.C: New testcase.
* gcc.dg/Warray-bounds-12.c: Likewise.
* gcc.dg/Warray-bounds-13.c: Likewise.
Jakub Jelinek [Tue, 27 Jan 2015 09:19:30 +0000 (10:19 +0100)]
re PR rtl-optimization/61058 (ICE: RTL check: expected elt 3 type 'B', have '0' (rtx barrier) in distance_agu_use_in_bb, at config/i386/i386.c:16740 with __builtin_unreachable())
PR rtl-optimization/61058
* jump.c (cleanup_barriers): Update basic block boundaries
if BLOCK_FOR_INSN is non-NULL on PREV.
David Malcolm [Tue, 27 Jan 2015 00:17:56 +0000 (00:17 +0000)]
update_web_docs_svn: support the JIT documentation
maintainer-scripts/ChangeLog:
* update_web_docs_svn: Don't delete gcc/jit/docs or
gcc/jit/jit-common.h, gcc/jit/notes.txt. Special case the
building of the JIT docs (using sphinx-build). Special case
copying them up.
David Malcolm [Tue, 27 Jan 2015 00:11:21 +0000 (00:11 +0000)]
Fix gcc_jit_context_get_last_error docs
gcc/jit/ChangeLog:
* docs/topics/compilation.rst (gcc_jit_result_get_code): Fix typo.
* docs/topics/contexts.rst (gcc_jit_context_get_last_error): The
error buffer is only valid until the next call to the context.
* libgccjit.h (gcc_jit_context_get_first_error): Reword the
comment to omit mention of compiling.
(gcc_jit_context_get_last_error): The error buffer is only valid
until the next call to the context.
Oleg Endo [Mon, 26 Jan 2015 23:56:05 +0000 (23:56 +0000)]
re PR target/49263 (SH Target: underutilized "TST #imm, R0" instruction)
gcc/
PR target/49263
* config/sh/sh.c (sh_split_treg_set_expr): Invoke emit_insn before
remove_insn.
* config/sh/sh.md (tstsi_t): Don't try to optimize constant with right
shifts if it already fits into K08.
Jonathan Wakely [Mon, 26 Jan 2015 23:42:39 +0000 (23:42 +0000)]
re PR target/64368 (Several libstdc++ test failures on non-linux platforms after r218964.)
PR libstdc++/64368
* config/locale/gnu/numeric_members.cc (numpunct<char>::~numpunct(),
numpunct<wchar_t>::~numpunct()): Do not set _M_data->_M_grouping.
* src/c++11/cxx11-shim_facets.cc (numpunct_shim): Remove _M_grouping
and use cache's _M_grouping field.
(__numpunct_fill_cache): Likewise.
(__moneypunct_fill_cache): Improve comments.
Paul Thomas [Mon, 26 Jan 2015 21:58:42 +0000 (21:58 +0000)]
re PR fortran/62044 (ICE in USE statement with RENAME for extended derived type)
2015-01-26 Paul Thomas <pault@gcc.gnu.org>
PR fortran/62044
* resolve.c (resolve_allocate_expr): If the default initializer
is NULL, keep the original MOLD expression so that the correct
typespec is available.
2015-01-26 Paul Thomas <pault@gcc.gnu.org>
PR fortran/62044
* gfortran.dg/allocate_with_mold_1.f90: New test
Jakub Jelinek [Mon, 26 Jan 2015 21:32:09 +0000 (22:32 +0100)]
re PR c/64778 (ICE on invalid code on x86_64-linux-gnu: tree check: expected class ‘type’, have ‘exceptional’ (error_mark) in create_tmp_from_val, at gimplify.c:491)
PR c/64778
* c-typeck.c (convert_arguments): Return -1 if there are
error_args, even if we've diagnosed too many arguments.