Replace write() data_format by regmap_update_bits() to keep bus specific
pre-configuration which might have happened before on the same register.
The bus specific bits in data_format register then need to be masked out,
Remove the data_range field from the struct adxl345_data, because it is
not used anymore.
Jonathan Cameron [Sat, 30 Mar 2024 19:08:49 +0000 (19:08 +0000)]
iio: adc: pac1934: Use device_for_each_available_child_node_scoped() to simplify error handling.
Also change both firmware parsing functions to return meaningful errors.
Whilst for the ACPI case this isn't that useful, for the generic fwnode
case we can return the errors coming from the property parsing instead
of just whether we succeeded or not.
Jonathan Cameron [Sat, 30 Mar 2024 19:08:46 +0000 (19:08 +0000)]
iio: adc: ad7173: Use device_for_each_child_node_scoped() to simplify error paths.
This loop definition automatically releases the fwnode_handle on early
exit such as the error cases seen here. This reducing boilerplate and
the chance of a resource leak being introduced in future.
Jonathan Cameron [Sat, 30 Mar 2024 19:08:45 +0000 (19:08 +0000)]
iio: adc: ad4130: Use device_for_each_child_node_scoped() to simplify error paths.
This loop definition removes the need for manual releasing of the fwnode_handle
in early exit paths (here an error path) allow simplfication of the code
and reducing the chance of future modificiations not releasing
fwnode_handle correctly.
Jonathan Cameron [Sat, 30 Mar 2024 18:53:05 +0000 (18:53 +0000)]
iio: dac: ad5770r: Use device_for_each_child_node_scoped()
Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.
Jonathan Cameron [Sat, 30 Mar 2024 18:53:04 +0000 (18:53 +0000)]
iio: dac: ad3552r: Use device_for_each_child_node_scoped()
Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.
Removing the goto err; statements also allows more extensive use of
dev_err_probe() further simplifying the code.
David Lechner [Thu, 28 Mar 2024 21:16:59 +0000 (16:16 -0500)]
iio: adc: ad7944: use spi_optimize_message()
This modifies the ad7944 driver to use spi_optimize_message() to reduce
CPU usage and increase the max sample rate by avoiding repeating
validation of the spi message on each transfer.
This simplifies the adi,spi-mode property parsing by using
device_property_match_property_string() instead of two separate
functions. Also, the error return value is now more informative
in cases where there was a problem parsing the property.
The DAC081C081 is a TI DAC whose software interface is compatible with
the DAC5571. It is the 8-bit version of the DAC121C081, already
supported by the DAC5571 driver. Extends the driver to support this
chip.
The DAC081C081 is a TI DAC whose software interface is compatible with
the DAC5571. It is the 8-bit version of the DAC121C081, already
supported by the DAC5571 bindings. Extends the bindings to support this
chip.
The Maxim max30101 is the replacement for the max30105, which is no
longer recommended for future designs.
The max30101 does not require new properties, and it can be described
with the existing ones for the max30105, which will be used as a
fallback compatible.
David Lechner [Thu, 14 Mar 2024 17:43:38 +0000 (12:43 -0500)]
iio: adc: ad7944: Add support for "3-wire mode"
This adds support for AD7944 ADCs wired in "3-wire mode". (NOTE: 3-wire
is the datasheet name for this wiring configuration and has nothing to
do with SPI_3WIRE.)
In the 3-wire mode, the SPI controller CS line can be wired to the CNV
line on the ADC and used to trigger conversions rather that using a
separate GPIO line.
The turbo/chain mode compatibility check at the end of the probe
function is technically can't be triggered right now but adding it now
anyway so that we don't forget to add it later when support for
daisy-chaining is added.
Nuno Sa [Thu, 29 Feb 2024 15:10:25 +0000 (16:10 +0100)]
iio: core: move to cleanup.h magic
Use the new cleanup magic for handling mutexes in IIO. This allows us to
greatly simplify some code paths.
Note that we keep the plain mutex calls in the
iio_device_release|acquire() APIs since in there the macros would likely
not help much (as we want to keep the lock acquired when he leave the
APIs).
iio: imu: inv_mpu6050: add WoM suspend wakeup with low-power mode
Add wakeup from suspend for WoM when enabled and put accel in low-power
mode when suspended. Requires rewriting pwr_mgmt_1 register handling and
factorize out accel LPF settings. Use a low-power rate similar to the chip
sampling rate but always lower for a best match of the sampling rate while
saving power and adjust threshold to follow the required roc value.
iio: imu: inv_mpu6050: add WoM event as accel event
Add WoM (roc rising) event as accel x_or_y_or_z event for all chips >=
MPU-6500. This requires to create new MPU-6500 channels as default and
MPU-6050 channels for older chips.
WoM is a threshold test on accel value comparing actual sample with
previous one. It maps best to roc rising event.
Add support of a new WOM sensor and functions for handling the associated
roc_rising event. The event value is in SI units. Ensure WOM is stopped and
restarted at suspend-resume, handle usage with buffer data ready interrupt,
and handle change in sampling rate impacting already set roc value.
Javier Carrasco [Sun, 3 Mar 2024 21:54:22 +0000 (22:54 +0100)]
iio: humidity: hdc3020: add reset management
The HDC3020 provides an active low reset signal that must be handled if
connected. Asserting this signal turns the device into Trigger-on Demand
measurement mode, reducing its power consumption when no measurements
are required like in low-power modes.
According to the datasheet, the longest "Reset Ready" is 3 ms, which is
only taken into account if the reset signal is defined.
Javier Carrasco [Sun, 3 Mar 2024 21:54:20 +0000 (22:54 +0100)]
iio: humidity: hdc3020: add power management
The HDC3020 sensor carries out periodic measurements during normal
operation, but as long as the power supply is enabled, it will carry on
in low-power modes. In order to avoid that and reduce power consumption,
the device can be switched to Trigger-on Demand mode, and if possible,
turn off its regulator.
According to the datasheet, the maximum "Power Up Ready" is 5 ms.
Add resume/suspend pm operations to manage measurement mode and
regulator state.
David Lechner [Mon, 4 Mar 2024 19:48:47 +0000 (13:48 -0600)]
iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
This adds a driver for the Analog Devices Inc. AD7944, AD7985, and
AD7986 ADCs. These are a family of pin-compatible ADCs that can sample
at rates up to 2.5 MSPS.
The initial driver adds support for sampling at lower rates using the
usual IIO triggered buffer and can handle all 3 possible reference
voltage configurations.
Subhajit Ghosh [Sat, 9 Mar 2024 10:50:31 +0000 (21:20 +1030)]
iio: light: Add support for APDS9306 Light Sensor
Driver support for Avago (Broadcom) APDS9306 Ambient Light Sensor.
It has two channels - ALS and CLEAR. The ALS (Ambient Light Sensor)
channel approximates the response of the human-eye providing direct
read out where the output count is proportional to ambient light levels.
It is internally temperature compensated and rejects 50Hz and 60Hz flicker
caused by artificial light sources. Hardware interrupt configuration is
optional. It is a low power device with 20 bit resolution and has
configurable adaptive interrupt mode and interrupt persistence mode.
The device also features inbuilt hardware gain, multiple integration time
selection options and sampling frequency selection options.
This driver also uses the IIO GTS (Gain Time Scale) Helpers Namespace for
Scales, Gains and Integration time implementation.
Andy Shevchenko [Mon, 4 Mar 2024 14:04:32 +0000 (16:04 +0200)]
iio: core: Leave private pointer NULL when no private data supplied
In iio_device_alloc() when size of the private data is 0,
the private pointer is calculated to point behind the valid data.
Leave it NULL when no private data supplied.
Fixes: 6d4ebd565d15 ("iio: core: wrap IIO device into an iio_dev_opaque object") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://lore.kernel.org/r/20240304140650.977784-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Dumitru Ceclan [Wed, 28 Feb 2024 11:06:20 +0000 (13:06 +0200)]
iio: adc: ad7173: add AD7173 driver
The AD7173 family offer a complete integrated Sigma-Delta ADC solution
which can be used in high precision, low noise single channel
applications or higher speed multiplexed applications. The Sigma-Delta
ADC is intended primarily for measurement of signals close to DC but also
delivers outstanding performance with input bandwidths out to ~10kHz.
Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Michael Walle <michael@walle.cc> # for gpio-regmap Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240228110622.25114-3-mitrutzceclan@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add optional irq_num attribute to ad_sigma_delta_info structure for
selecting the used interrupt line for ADC's conversion completion.
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20240228110622.25114-2-mitrutzceclan@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Dumitru Ceclan [Wed, 28 Feb 2024 11:06:18 +0000 (13:06 +0200)]
dt-bindings: adc: add AD7173
The AD7173 family offer a complete integrated Sigma-Delta ADC solution
which can be used in high precision, low noise single channel applications
or higher speed multiplexed applications. The Sigma-Delta ADC is intended
primarily for measurement of signals close to DC but also delivers
outstanding performance with input bandwidths out to ~10kHz.
Jonathan Cameron [Sat, 24 Feb 2024 12:32:10 +0000 (12:32 +0000)]
iio: adc: rzg2l_adc: Use device_for_each_child_node_scoped()
Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.
Jonathan Cameron [Sat, 24 Feb 2024 12:32:07 +0000 (12:32 +0000)]
iio: temp: ltc2983: Use __free(fwnode_handle) and device_for_each_node_scoped()
This use of the new cleanup.h scope based freeing infrastructure allows
us to exit directly from error conditions and in the good path with
the reference obtained from fwnode_find_reference() (which may be an error
pointer) automatically released.
Similarly the _scoped() version of device_for_each_child_node()
removes the need for the manual calling of fwnode_handl_put() in
paths where the code exits the loop early.
Tidy up some unusual indentation in a dev_dbg() whilst here.
Jonathan Cameron [Sun, 18 Feb 2024 17:27:30 +0000 (17:27 +0000)]
iio: accel: fxls8962af: Switch from of specific to fwnode based properties.
Only the irq was retrieved using an of specific accessor. Switch to the
fwnode equivalent and adjust headers. Also include missing mod_devicetable.h
and irq.h.
Jonathan Cameron [Sun, 18 Feb 2024 17:27:29 +0000 (17:27 +0000)]
iio: accel: mma8452: Switch from of specific to fwnode property handling.
In this case only use was to get an irq so easily converted.
Also include linux/mod_devicetable.h for struct of_device_id definition.
Using the generic firmware handling, this driver may be used with other
firmware types. This also removes an example that might get copied into
other drivers leaving them unable to be used with alternative firmware
types.
Cc: Haibo Chen <haibo.chen@nxp.com> Reviewed-and-tested-by: Haibo Chen <haibo.chen@nxp.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240218172731.1023367-7-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan Cameron [Sun, 18 Feb 2024 17:27:27 +0000 (17:27 +0000)]
iio: adc: ad7292: Switch from of specific to fwnode property handling
This reduces the wrong of device tree only IIO drivers that might
be copied by converting over this simple case.
Makes use of the new _scoped() handling to automatically release
the fwnode_handle on early exit from the loop.
Jonathan Cameron [Sun, 18 Feb 2024 17:27:26 +0000 (17:27 +0000)]
iio: adc: ad7124: Switch from of specific to fwnode based property handling
Using the generic firmware data access functions from property.h
provides a number of advantages:
1) Works with different firmware types.
2) Doesn't provide a 'bad' example for new IIO drivers.
3) Lets us use the new _scoped() loops with automatic reference count
cleanup for fwnode_handle
Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240218172731.1023367-4-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan Cameron [Sun, 18 Feb 2024 17:27:25 +0000 (17:27 +0000)]
iio: adc: fsl-imx25-gcq: Use devm_* and dev_err_probe() to simplify probe
Custom callbacks are need for regulators (so there is a handle to read
the voltage from) and the clk because it is retrieved from the parent
rather than directly from firmware description.
Jonathan Cameron [Sun, 18 Feb 2024 17:27:24 +0000 (17:27 +0000)]
iio: adc: fsl-imx25-gcq: Switch from of specific handing to fwnode based.
Using the generic firmware data access functions from property.h
provides a number of advantages:
1) Works with different firmware types.
2) Doesn't provide a 'bad' example for new IIO drivers.
3) Lets us use the new _scoped() loops with automatic reference count
cleanup for fwnode_handle
Jonathan Cameron [Sat, 17 Feb 2024 16:42:49 +0000 (16:42 +0000)]
iio: dac: ltc2688: Use device_for_each_child_node_scoped()
Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240217164249.921878-16-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan Cameron [Sat, 17 Feb 2024 16:42:46 +0000 (16:42 +0000)]
iio: addac: ad74413r: Use device_for_each_child_node_scoped()
Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.
The use of fwnode_for_each_available_child_node() here is assumed
to have been down to a false assumption that device_for_each_child_node()
doesn't check avaialble - so this transition to the scoped
device_for_each_child_node_scoped() is equivalent.
Jonathan Cameron [Sat, 17 Feb 2024 16:42:39 +0000 (16:42 +0000)]
iio: adc: max11410: Use device_for_each_child_node_scoped()
Switching to the _scoped() version removes the need for manual
calling of fwnode_handle_put() in the paths where the code
exits the loop early. In this case that's all in error paths.
Similar to recently propose for_each_child_of_node_scoped() this
new version of the loop macro instantiates a new local
struct fwnode_handle * that uses the __free(fwnode_handle) auto
cleanup handling so that if a reference to a node is held on early
exit from the loop the reference will be released. If the loop
runs to completion, the child pointer will be NULL and no action will
be taken.
The reason this is useful is that it removes the need for
fwnode_handle_put() on early loop exits. If there is a need
to retain the reference, then return_ptr(child) or no_free_ptr(child)
may be used to safely disable the auto cleanup.
Jonathan Cameron [Sat, 17 Feb 2024 16:42:36 +0000 (16:42 +0000)]
device property: Add cleanup.h based fwnode_handle_put() scope based cleanup.
Useful where the fwnode_handle was obtained from a call such as
fwnode_find_reference() as it will safely do nothing if IS_ERR() is true
and will automatically release the reference on the variable leaving
scope.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20240217164249.921878-3-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jonathan Cameron [Sat, 17 Feb 2024 16:42:35 +0000 (16:42 +0000)]
device property: Move fwnode_handle_put() into property.h
By having this function as static inline in the header, the compiler
is able to see if can optmize the call out if (IS_ERR_OR_NULL(fwnode))
This will allow a simpler DEFINE_FREE() call in the following patch.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240217164249.921878-2-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Linus Torvalds [Sun, 24 Mar 2024 20:54:06 +0000 (13:54 -0700)]
Merge tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Fix logic that is supposed to prevent placement of the kernel image
below LOAD_PHYSICAL_ADDR
- Use the firmware stack in the EFI stub when running in mixed mode
- Clear BSS only once when using mixed mode
- Check efi.get_variable() function pointer for NULL before trying to
call it
* tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: fix panic in kdump kernel
x86/efistub: Don't clear BSS twice in mixed mode
x86/efistub: Call mixed mode boot services on the firmware's stack
efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address
Linus Torvalds [Sun, 24 Mar 2024 18:13:56 +0000 (11:13 -0700)]
Merge tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Ensure that the encryption mask at boot is properly propagated on
5-level page tables, otherwise the PGD entry is incorrectly set to
non-encrypted, which causes system crashes during boot.
- Undo the deferred 5-level page table setup as it cannot work with
memory encryption enabled.
- Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset
to the default value but the cached variable is not, so subsequent
comparisons might yield the wrong result and as a consequence the
result prevents updating the MSR.
- Register the local APIC address only once in the MPPARSE enumeration
to prevent triggering the related WARN_ONs() in the APIC and topology
code.
- Handle the case where no APIC is found gracefully by registering a
fake APIC in the topology code. That makes all related topology
functions work correctly and does not affect the actual APIC driver
code at all.
- Don't evaluate logical IDs during early boot as the local APIC IDs
are not yet enumerated and the invoked function returns an error
code. Nothing requires the logical IDs before the final CPUID
enumeration takes place, which happens after the enumeration.
- Cure the fallout of the per CPU rework on UP which misplaced the
copying of boot_cpu_data to per CPU data so that the final update to
boot_cpu_data got lost which caused inconsistent state and boot
crashes.
- Use copy_from_kernel_nofault() in the kprobes setup as there is no
guarantee that the address can be safely accessed.
- Reorder struct members in struct saved_context to work around another
kmemleak false positive
- Remove the buggy code which tries to update the E820 kexec table for
setup_data as that is never passed to the kexec kernel.
- Update the resource control documentation to use the proper units.
- Fix a Kconfig warning observed with tinyconfig
* tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Move 5-level paging global variable assignments back
x86/boot/64: Apply encryption mask to 5-level pagetable update
x86/cpu: Add model number for another Intel Arrow Lake mobile processor
x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD
Documentation/x86: Document that resctrl bandwidth control units are MiB
x86/mpparse: Register APIC address only once
x86/topology: Handle the !APIC case gracefully
x86/topology: Don't evaluate logical IDs during early boot
x86/cpu: Ensure that CPU info updates are propagated on UP
kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address
x86/pm: Work around false positive kmemleak report in msr_build_context()
x86/kexec: Do not update E820 kexec table for setup_data
x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'
Linus Torvalds [Sun, 24 Mar 2024 18:11:05 +0000 (11:11 -0700)]
Merge tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler doc clarification from Thomas Gleixner:
"A single update for the documentation of the base_slice_ns tunable to
clarify that any value which is less than the tick slice has no effect
because the scheduler tick is not guaranteed to happen within the set
time slice"
* tag 'sched-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/doc: Update documentation for base_slice_ns and CONFIG_HZ relation
Linus Torvalds [Sun, 24 Mar 2024 17:45:31 +0000 (10:45 -0700)]
Merge tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"This has a set of swiotlb alignment fixes for sometimes very long
standing bugs from Will. We've been discussion them for a while and
they should be solid now"
* tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Reinstate page-alignment for mappings >= PAGE_SIZE
iommu/dma: Force swiotlb_max_mapping_size on an untrusted device
swiotlb: Fix alignment checks when both allocation and DMA masks are present
swiotlb: Honour dma_alloc_coherent() alignment in swiotlb_alloc()
swiotlb: Enforce page alignment in swiotlb_alloc()
swiotlb: Fix double-allocation of slots due to broken alignment handling
Check if get_next_variable() is actually valid pointer before
calling it. In kdump kernel this method is set to NULL that causes
panic during the kexec-ed kernel boot.
Tested with QEMU and OVMF firmware.
Fixes: bad267f9e18f ("efi: verify that variable services are supported") Signed-off-by: Oleksandr Tymoshenko <ovt@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ard Biesheuvel [Fri, 22 Mar 2024 16:01:45 +0000 (17:01 +0100)]
x86/efistub: Don't clear BSS twice in mixed mode
Clearing BSS should only be done once, at the very beginning.
efi_pe_entry() is the entrypoint from the firmware, which may not clear
BSS and so it is done explicitly. However, efi_pe_entry() is also used
as an entrypoint by the mixed mode startup code, in which case BSS will
already have been cleared, and doing it again at this point will corrupt
global variables holding the firmware's GDT/IDT and segment selectors.
So make the memset() conditional on whether the EFI stub is running in
native mode.
Ard Biesheuvel [Fri, 22 Mar 2024 15:03:58 +0000 (17:03 +0200)]
x86/efistub: Call mixed mode boot services on the firmware's stack
Normally, the EFI stub calls into the EFI boot services using the stack
that was live when the stub was entered. According to the UEFI spec,
this stack needs to be at least 128k in size - this might seem large but
all asynchronous processing and event handling in EFI runs from the same
stack and so quite a lot of space may be used in practice.
In mixed mode, the situation is a bit different: the bootloader calls
the 32-bit EFI stub entry point, which calls the decompressor's 32-bit
entry point, where the boot stack is set up, using a fixed allocation
of 16k. This stack is still in use when the EFI stub is started in
64-bit mode, and so all calls back into the EFI firmware will be using
the decompressor's limited boot stack.
Due to the placement of the boot stack right after the boot heap, any
stack overruns have gone unnoticed. However, commit
5c4feadb0011983b ("x86/decompressor: Move global symbol references to C code")
moved the definition of the boot heap into C code, and now the boot
stack is placed right at the base of BSS, where any overruns will
corrupt the end of the .data section.
While it would be possible to work around this by increasing the size of
the boot stack, doing so would affect all x86 systems, and mixed mode
systems are a tiny (and shrinking) fraction of the x86 installed base.
So instead, record the firmware stack pointer value when entering from
the 32-bit firmware, and switch to this stack every time a EFI boot
service call is made.
Tom Lendacky [Fri, 22 Mar 2024 15:41:07 +0000 (10:41 -0500)]
x86/boot/64: Move 5-level paging global variable assignments back
Commit 63bed9660420 ("x86/startup_64: Defer assignment of 5-level paging
global variables") moved assignment of 5-level global variables to later
in the boot in order to avoid having to use RIP relative addressing in
order to set them. However, when running with 5-level paging and SME
active (mem_encrypt=on), the variables are needed as part of the page
table setup needed to encrypt the kernel (using pgd_none(), p4d_offset(),
etc.). Since the variables haven't been set, the page table manipulation
is done as if 4-level paging is active, causing the system to crash on
boot.
While only a subset of the assignments that were moved need to be set
early, move all of the assignments back into check_la57_support() so that
these assignments aren't spread between two locations. Instead of just
reverting the fix, this uses the new RIP_REL_REF() macro when assigning
the variables.
Tom Lendacky [Fri, 22 Mar 2024 15:41:06 +0000 (10:41 -0500)]
x86/boot/64: Apply encryption mask to 5-level pagetable update
When running with 5-level page tables, the kernel mapping PGD entry is
updated to point to the P4D table. The assignment uses _PAGE_TABLE_NOENC,
which, when SME is active (mem_encrypt=on), results in a page table
entry without the encryption mask set, causing the system to crash on
boot.
Change the assignment to use _PAGE_TABLE instead of _PAGE_TABLE_NOENC so
that the encryption mask is set for the PGD entry.
Adamos Ttofari [Fri, 22 Mar 2024 23:04:39 +0000 (16:04 -0700)]
x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD
Commit 672365477ae8 ("x86/fpu: Update XFD state where required") and
commit 8bf26758ca96 ("x86/fpu: Add XFD state to fpstate") introduced a
per CPU variable xfd_state to keep the MSR_IA32_XFD value cached, in
order to avoid unnecessary writes to the MSR.
On CPU hotplug MSR_IA32_XFD is reset to the init_fpstate.xfd, which
wipes out any stale state. But the per CPU cached xfd value is not
reset, which brings them out of sync.
As a consequence a subsequent xfd_update_state() might fail to update
the MSR which in turn can result in XRSTOR raising a #NM in kernel
space, which crashes the kernel.
To fix this, introduce xfd_set_state() to write xfd_state together
with MSR_IA32_XFD, and use it in all places that set MSR_IA32_XFD.
Fixes: 672365477ae8 ("x86/fpu: Update XFD state where required") Signed-off-by: Adamos Ttofari <attofari@amazon.de> Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240322230439.456571-1-chang.seok.bae@intel.com Closes: https://lore.kernel.org/lkml/20230511152818.13839-1-attofari@amazon.de
Tony Luck [Fri, 22 Mar 2024 18:20:15 +0000 (11:20 -0700)]
Documentation/x86: Document that resctrl bandwidth control units are MiB
The memory bandwidth software controller uses 2^20 units rather than
10^6. See mbm_bw_count() which computes bandwidth using the "SZ_1M"
Linux define for 0x00100000.
Update the documentation to use MiB when describing this feature.
It's too late to fix the mount option "mba_MBps" as that is now an
established user interface.
Linus Torvalds [Sat, 23 Mar 2024 21:49:25 +0000 (14:49 -0700)]
Merge tag 'timers-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two regression fixes for the timer and timer migration code:
- Prevent endless timer requeuing which is caused by two CPUs racing
out of idle. This happens when the last CPU goes idle and therefore
has to ensure to expire the pending global timers and some other
CPU come out of idle at the same time and the other CPU wins the
race and expires the global queue. This causes the last CPU to
chase ghost timers forever and reprogramming it's clockevent device
endlessly.
Cure this by re-evaluating the wakeup time unconditionally.
- The split into local (pinned) and global timers in the timer wheel
caused a regression for NOHZ full as it broke the idle tracking of
global timers. On NOHZ full this prevents an self IPI being sent
which in turn causes the timer to be not programmed and not being
expired on time.
Restore the idle tracking for the global timer base so that the
self IPI condition for NOHZ full is working correctly again"
* tag 'timers-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix removed self-IPI on global timer's enqueue in nohz_full
timers/migration: Fix endless timer requeue after idle interrupts
Linus Torvalds [Sat, 23 Mar 2024 21:42:45 +0000 (14:42 -0700)]
Merge tag 'timers-core-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more clocksource updates from Thomas Gleixner:
"A set of updates for clocksource and clockevent drivers:
- A fix for the prescaler of the ARM global timer where the prescaler
mask define only covered 4 bits while it is actully 8 bits wide.
This obviously restricted the possible range of prescaler
adjustments
- A fix for the RISC-V timer which prevents a timer interrupt being
raised while the timer is initialized
- A set of device tree updates to support new system on chips in
various drivers
- Kernel-doc and other cleanups all over the place"
* tag 'timers-core-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-riscv: Clear timer interrupt on timer initialization
dt-bindings: timer: Add support for cadence TTC PWM
clocksource/drivers/arm_global_timer: Simplify prescaler register access
clocksource/drivers/arm_global_timer: Guard against division by zero
clocksource/drivers/arm_global_timer: Make gt_target_rate unsigned long
dt-bindings: timer: add Ralink SoCs system tick counter
clocksource: arm_global_timer: fix non-kernel-doc comment
clocksource/drivers/arm_global_timer: Remove stray tab
clocksource/drivers/arm_global_timer: Fix maximum prescaler value
clocksource/drivers/imx-sysctr: Add i.MX95 support
clocksource/drivers/imx-sysctr: Drop use global variables
dt-bindings: timer: nxp,sysctr-timer: support i.MX95
dt-bindings: timer: renesas: ostm: Document RZ/Five SoC
dt-bindings: timer: renesas,tmu: Document input capture interrupt
clocksource/drivers/ti-32K: Fix misuse of "/**" comment
clocksource/drivers/stm32: Fix all kernel-doc warnings
dt-bindings: timer: exynos4210-mct: Add google,gs101-mct compatible
clocksource/drivers/imx: Fix -Wunused-but-set-variable warning
Linus Torvalds [Sat, 23 Mar 2024 21:30:38 +0000 (14:30 -0700)]
Merge tag 'irq-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A series of fixes for the Renesas RZG21 interrupt chip driver to
prevent spurious and misrouted interrupts.
- Ensure that posted writes are flushed in the eoi() callback
- Ensure that interrupts are masked at the chip level when the
trigger type is changed
- Clear the interrupt status register when setting up edge type
trigger modes
- Ensure that the trigger type and routing information is set before
the interrupt is enabled"
* tag 'irq-urgent-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time
irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger type
irqchip/renesas-rzg2l: Rename rzg2l_irq_eoi()
irqchip/renesas-rzg2l: Rename rzg2l_tint_eoi()
irqchip/renesas-rzg2l: Flush posted write in irq_eoi()
Linus Torvalds [Sat, 23 Mar 2024 21:17:37 +0000 (14:17 -0700)]
Merge tag 'core-entry-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core entry fix from Thomas Gleixner:
"A single fix for the generic entry code:
The trace_sys_enter() tracepoint can modify the syscall number via
kprobes or BPF in pt_regs, but that requires that the syscall number
is re-evaluted from pt_regs after the tracepoint.
A seccomp fix in that area removed the re-evaluation so the change
does not take effect as the code just uses the locally cached number.
Restore the original behaviour by re-evaluating the syscall number
after the tracepoint"
* tag 'core-entry-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Respect changes to system call number by trace_sys_enter()
Linus Torvalds [Sat, 23 Mar 2024 16:21:26 +0000 (09:21 -0700)]
Merge tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Handle errors in mark_rodata_ro() and mark_initmem_nx()
- Make struct crash_mem available without CONFIG_CRASH_DUMP
Thanks to Christophe Leroy and Hari Bathini.
* tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency
powerpc/kexec: split CONFIG_KEXEC_FILE and CONFIG_CRASH_DUMP
kexec/kdump: make struct crash_mem available without CONFIG_CRASH_DUMP
powerpc: Handle error in mark_rodata_ro() and mark_initmem_nx()
Linus Torvalds [Sat, 23 Mar 2024 16:17:03 +0000 (09:17 -0700)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
- remove a misuse of kernel-doc comment
- use "Call trace:" for backtraces like other architectures
- implement copy_from_kernel_nofault_allowed() to fix a LKDTM test
- add a "cut here" line for prefetch aborts
- remove unnecessary Kconfing entry for FRAME_POINTER
- remove iwmmxy support for PJ4/PJ4B cores
- use bitfield helpers in ptrace to improve readabililty
- check if folio is reserved before flushing
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9359/1: flush: check if the folio is reserved for no-mapping addresses
ARM: 9354/1: ptrace: Use bitfield helpers
ARM: 9352/1: iwmmxt: Remove support for PJ4/PJ4B cores
ARM: 9353/1: remove unneeded entry for CONFIG_FRAME_POINTER
ARM: 9351/1: fault: Add "cut here" line for prefetch aborts
ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()
ARM: 9349/1: unwind: Add missing "Call trace:" line
ARM: 9334/1: mm: init: remove misuse of kernel-doc comment
Linus Torvalds [Sat, 23 Mar 2024 15:43:21 +0000 (08:43 -0700)]
Merge tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more hardening updates from Kees Cook:
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
* tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/bugs: Improve warning message for compilers without counted_by support
overflow: Change DEFINE_FLEX to take __counted_by member
Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST"
arch/Kconfig: eliminate needless UTF-8 character in Kconfig help
ubsan: Disable signed integer overflow sanitizer on GCC < 8
Thomas Gleixner [Fri, 22 Mar 2024 18:56:39 +0000 (19:56 +0100)]
x86/mpparse: Register APIC address only once
The APIC address is registered twice. First during the early detection and
afterwards when actually scanning the table for APIC IDs. The APIC and
topology core warn about the second attempt.
Thomas Gleixner [Fri, 22 Mar 2024 18:56:38 +0000 (19:56 +0100)]
x86/topology: Handle the !APIC case gracefully
If there is no local APIC enumerated and registered then the topology
bitmaps are empty. Therefore, topology_init_possible_cpus() will die with
a division by zero exception.
Prevent this by registering a fake APIC id to populate the topology
bitmap. This also allows to use all topology query interfaces
unconditionally. It does not affect the actual APIC code because either
the local APIC address was not registered or no local APIC could be
detected.
Fixes: f1f758a80516 ("x86/topology: Add a mechanism to track topology via APIC IDs") Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240322185305.242709302@linutronix.de
Thomas Gleixner [Fri, 22 Mar 2024 18:56:35 +0000 (19:56 +0100)]
x86/cpu: Ensure that CPU info updates are propagated on UP
The boot sequence evaluates CPUID information twice:
1) During early boot
2) When finalizing the early setup right before
mitigations are selected and alternatives are patched.
In both cases the evaluation is stored in boot_cpu_data, but on UP the
copying of boot_cpu_data to the per CPU info of the boot CPU happens
between #1 and #2. So any update which happens in #2 is never propagated to
the per CPU info instance.
Consolidate the whole logic and copy boot_cpu_data right before applying
alternatives as that's the point where boot_cpu_data is in it's final
state and not supposed to change anymore.
This also removes the voodoo mb() from smp_prepare_cpus_common() which
had absolutely no purpose.
Fixes: 71eb4893cfaf ("x86/percpu: Cure per CPU madness on UP") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20240322185305.127642785@linutronix.de
lkdtm/bugs: Improve warning message for compilers without counted_by support
The current message for telling the user that their compiler does not
support the counted_by attribute in the FAM_BOUNDS test does not make
much sense either grammatically or semantically. Fix it to make it
correct in both aspects.
Kees Cook [Wed, 6 Mar 2024 23:51:36 +0000 (15:51 -0800)]
overflow: Change DEFINE_FLEX to take __counted_by member
The norm should be flexible array structures with __counted_by
annotations, so DEFINE_FLEX() is updated to expect that. Rename
the non-annotated version to DEFINE_RAW_FLEX(), and update the
few existing users. Additionally add selftests for the macros.
Linus Torvalds [Fri, 22 Mar 2024 20:31:07 +0000 (13:31 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"The vfs has long had a write lifetime hint mechanism that gives the
expected longevity on storage of the data being written. f2fs was the
original consumer of this and used the hint for flash data placement
(mostly to avoid write amplification by placing objects with similar
lifetimes in the same erase block).
More recently the SCSI based UFS (Universal Flash Storage) drivers
have wanted to take advantage of this as well, for the same reasons as
f2fs, necessitating plumbing the write hints through the block layer
and then adding it to the SCSI core.
The vfs write_hints already taken plumbs this as far as block and this
completes the SCSI core enabling based on a recently agreed reuse of
the old write command group number. The additions to the scsi_debug
driver are for emulating this property so we can run tests on it in
the absence of an actual UFS device"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Maintain write statistics per group number
scsi: scsi_debug: Implement GET STREAM STATUS
scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page
scsi: scsi_debug: Allocate the MODE SENSE response from the heap
scsi: scsi_debug: Rework subpage code error handling
scsi: scsi_debug: Rework page code error handling
scsi: scsi_debug: Support the block limits extension VPD page
scsi: scsi_debug: Reduce code duplication
scsi: sd: Translate data lifetime information
scsi: scsi_proto: Add structures and constants related to I/O groups and streams
scsi: core: Query the Block Limits Extension VPD page
Linus Torvalds [Fri, 22 Mar 2024 19:46:07 +0000 (12:46 -0700)]
Merge tag 'block-6.9-20240322' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Keith:
- Make an informative message less ominous (Keith)
- Enhanced trace decoding (Guixin)
- TCP updates (Hannes, Li)
- Fabrics connect deadlock fix (Chunguang)
- Platform API migration update (Uwe)
- A new device quirk (Jiawei)
- Remove dead assignment in fd (Yufeng)
* tag 'block-6.9-20240322' of git://git.kernel.dk/linux:
nvmet-rdma: remove NVMET_RDMA_REQ_INVALIDATE_RKEY flag
nvme: remove redundant BUILD_BUG_ON check
floppy: remove duplicated code in redo_fd_request()
nvme/tcp: Add wq_unbound modparam for nvme_tcp_wq
nvme-tcp: Export the nvme_tcp_wq to sysfs
drivers/nvme: Add quirks for device 126f:2262
nvme: parse format command's lbafu when tracing
nvme: add tracing of reservation commands
nvme: parse zns command's zsa and zrasf to string
nvme: use nvme_disk_is_ns_head helper
nvme: fix reconnection fail due to reserved tag allocation
nvmet: add tracing of zns commands
nvmet: add tracing of authentication commands
nvme-apple: Convert to platform remove callback returning void
nvmet-tcp: do not continue for invalid icreq
nvme: change shutdown timeout setting message
Linus Torvalds [Fri, 22 Mar 2024 19:42:55 +0000 (12:42 -0700)]
Merge tag 'io_uring-6.9-20240322' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"One patch just missed the initial pull, the rest are either fixes or
small cleanups that make our life easier for the next kernel:
- Fix a potential leak in error handling of pinned pages, and clean
it up (Gabriel, Pavel)
- Fix an issue with how read multishot returns retry (me)
- Fix a problem with waitid/futex removals, if we hit the case of
needing to remove all of them at exit time (me)
- Fix for a regression introduced in this merge window, where we
don't always have sr->done_io initialized if the ->prep_async()
path is used (me)
- Fix for SQPOLL setup error handling (me)
- Fix for a poll removal request being delayed (Pavel)
- Rename of a struct member which had a confusing name (Pavel)"
* tag 'io_uring-6.9-20240322' of git://git.kernel.dk/linux:
io_uring/sqpoll: early exit thread if task_context wasn't allocated
io_uring: clear opcode specific data for an early failure
io_uring/net: ensure async prep handlers always initialize ->done_io
io_uring/waitid: always remove waitid entry for cancel all
io_uring/futex: always remove futex entry for cancel all
io_uring: fix poll_remove stalled req completion
io_uring: Fix release of pinned pages when __io_uaddr_map fails
io_uring/kbuf: rename is_mapped
io_uring: simplify io_pages_free
io_uring: clean rings on NO_MMAP alloc fail
io_uring/rw: return IOU_ISSUE_SKIP_COMPLETE for multishot retry
io_uring: don't save/restore iowait state
projects / thirdparty / linux.git / log
