Michael Meissner [Thu, 17 Oct 2013 19:12:57 +0000 (19:12 +0000)]
rs6000.c (enum rs6000_reload_reg_type): Add new fields to the reg_addr array that describes the valid addressing mode...
2013-10-17 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (enum rs6000_reload_reg_type): Add new
fields to the reg_addr array that describes the valid addressing
mode for any register, general purpose registers, floating point
registers, and Altivec registers.
(FIRST_RELOAD_REG_CLASS): Likewise.
(LAST_RELOAD_REG_CLASS): Likewise.
(struct reload_reg_map_type): Likewise.
(reload_reg_map_type): Likewise.
(RELOAD_REG_VALID): Likewise.
(RELOAD_REG_MULTIPLE): Likewise.
(RELOAD_REG_INDEXED): Likewise.
(RELOAD_REG_OFFSET): Likewise.
(RELOAD_REG_PRE_INCDEC): Likewise.
(RELOAD_REG_PRE_MODIFY): Likewise.
(reg_addr): Likewise.
(mode_supports_pre_incdec_p): New helper functions to say whether
a given mode supports PRE_INC, PRE_DEC, and PRE_MODIFY.
(mode_supports_pre_modify_p): Likewise.
(rs6000_debug_vector_unit): Rearrange the -mdebug=reg output to
print the valid address mode bits for each mode.
(rs6000_debug_print_mode): Likewise.
(rs6000_debug_reg_global): Likewise.
(rs6000_setup_reg_addr_masks): New function to set up the address
mask bits for each type.
(rs6000_init_hard_regno_mode_ok): Use memset to clear arrays.
Call rs6000_setup_reg_addr_masks to set up the address mask bits.
(rs6000_legitimate_address_p): Use mode_supports_pre_incdec_p and
mode_supports_pre_modify_p to determine if PRE_INC, PRE_DEC, and
PRE_MODIFY are supported.
(rs6000_output_move_128bit): Change to use {src,dest}_vmx_p for altivec
registers, instead of {src,dest}_av_p.
(rs6000_print_options_internal): Tweak the debug output slightly.
Michael Meissner [Thu, 17 Oct 2013 19:04:37 +0000 (19:04 +0000)]
rs6000.c (enum rs6000_reload_reg_type): Add new fields to the reg_addr array that describes the valid addressing mode...
2013-10-07 Michael Meissner <meissner@linux.vnet.ibm.com>
* config/rs6000/rs6000.c (enum rs6000_reload_reg_type): Add new
fields to the reg_addr array that describes the valid addressing
mode for any register, general purpose registers, floating point
registers, and Altivec registers.
(FIRST_RELOAD_REG_CLASS): Likewise.
(LAST_RELOAD_REG_CLASS): Likewise.
(struct reload_reg_map_type): Likewise.
(reload_reg_map_type): Likewise.
(RELOAD_REG_VALID): Likewise.
(RELOAD_REG_MULTIPLE): Likewise.
(RELOAD_REG_INDEXED): Likewise.
(RELOAD_REG_OFFSET): Likewise.
(RELOAD_REG_PRE_INCDEC): Likewise.
(RELOAD_REG_PRE_MODIFY): Likewise.
(reg_addr): Likewise.
(mode_supports_pre_incdec_p): New helper functions to say whether
a given mode supports PRE_INC, PRE_DEC, and PRE_MODIFY.
(mode_supports_pre_modify_p): Likewise.
(rs6000_debug_vector_unit): Rearrange the -mdebug=reg output to
print the valid address mode bits for each mode.
(rs6000_debug_print_mode): Likewise.
(rs6000_debug_reg_global): Likewise.
(rs6000_setup_reg_addr_masks): New function to set up the address
mask bits for each type.
(rs6000_init_hard_regno_mode_ok): Use memset to clear arrays.
Call rs6000_setup_reg_addr_masks to set up the address mask bits.
(rs6000_legitimate_address_p): Use mode_supports_pre_incdec_p and
mode_supports_pre_modify_p to determine if PRE_INC, PRE_DEC, and
PRE_MODIFY are supported.
(rs6000_print_options_internal): Tweak the debug output slightly.
Andrew MacLeod [Thu, 17 Oct 2013 17:41:07 +0000 (17:41 +0000)]
tree-flow.h (struct omp_region): Move to omp-low.c.
* tree-flow.h (struct omp_region): Move to omp-low.c.
Remove omp_ prototypes and variables.
* gimple.h (omp_reduction_init): Move prototype to omp-low.h.
(copy_var_decl): Relocate prototype from tree-flow.h.
* gimple.c (copy_var_decl): Relocate from omp-low.c.
* tree.h: Move prototype to omp-low.h.
* omp-low.h: New File. Relocate prototypes here.
* omp-low.c (struct omp_region): Make local here.
(root_omp_region): Make static.
(copy_var_decl) Move to gimple.c.
(new_omp_region): Make static.
(make_gimple_omp_edges): New. Refactored from tree-cfg.c make_edges.
* tree-cfg.c: Include omp-low.h.
(make_edges): Factor out OMP specific bits to make_gimple_omp_edges.
* gimplify.c: Include omp-low.h.
* tree-parloops.c: Likewise.
c
* c-parser.c: Include omp-low.h.
* c-typeck.c: Likewise.
cp
* parser.c: Include omp-low.h.
* semantics.c: Likewise.
Michael Meissner [Thu, 17 Oct 2013 17:07:49 +0000 (17:07 +0000)]
re PR target/58673 (ICE in final_scan_insn for movti_ppc64 with base+offset address)
[gcc]
2013-10-17 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/58673
* config/rs6000/rs6000.c (rs6000_legitimate_address_p): Only
restrict TImode addresses to single indirect registers if both
-mquad-memory and -mvsx-timode are used.
(rs6000_output_move_128bit): Use quad_load_store_p to determine if
we should emit load/store quad. Remove using %y for quad memory
addresses.
* config/rs6000/rs6000.md (mov<mode>_ppc64, TI/PTImode): Add
constraints to allow load/store quad on machines where TImode is
not allowed in VSX registers. Use 'n' instead of 'F' constraint
for TImode to load integer constants.
[gcc/testsuite]
2013-10-17 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/58673
* gcc.target/powerpc/pr58673-1.c: New file to test whether
-mquad-word + -mno-vsx-timode causes errors.
* gcc.target/powerpc/pr58673-2.c: Likewise.
Michael Meissner [Thu, 17 Oct 2013 17:06:24 +0000 (17:06 +0000)]
re PR target/58673 (ICE in final_scan_insn for movti_ppc64 with base+offset address)
[gcc]
2013-10-17 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/58673
* config/rs6000/rs6000.c (rs6000_legitimate_address_p): Only
restrict TImode addresses to single indirect registers if both
-mquad-memory and -mvsx-timode are used.
(rs6000_output_move_128bit): Use quad_load_store_p to determine if
we should emit load/store quad. Remove using %y for quad memory
addresses.
* config/rs6000/rs6000.md (mov<mode>_ppc64, TI/PTImode): Add
constraints to allow load/store quad on machines where TImode is
not allowed in VSX registers. Use 'n' instead of 'F' constraint
for TImode to load integer constants.
[gcc/testsuite]
2013-10-17 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/58673
* gcc.target/powerpc/pr58673-1.c: New file to test whether
-mquad-word + -mno-vsx-timode causes errors.
* gcc.target/powerpc/pr58673-2.c: Likewise.
* sem_prag.adb (Check_Dependency_Clause):
Recognize the scenario where successful clause matching has
depleted the available refinement items and the clause to match
technically refines to null => null.
2013-10-17 Tristan Gingold <gingold@adacore.com>
* exp_prag.adb (Expand_Pragma_Import_Or_Interface): Specify
External_Name instead of Link_Name for the RTTI declaration.
Arnaud Charlet [Thu, 17 Oct 2013 14:07:57 +0000 (16:07 +0200)]
[multiple changes]
2013-10-17 Yannick Moy <moy@adacore.com>
* sem_res.adb (Resolve_Short_Circuit): Only
generate expression-with-action when full expansion is set.
2013-10-17 Yannick Moy <moy@adacore.com>
* debug.adb Remove obsolete comment.
2013-10-17 Thomas Quinot <quinot@adacore.com>
* exp_ch4.adb (Process_Transient_Object.Find_Enclosing_Contexts):
Avoid late insertion when expanding an expression with action
nested within a transient block; Do not inconditionally generate
a finalization call if the generated object is from a specific
branch of a conditional expression.
2013-10-17 Pascal Obry <obry@adacore.com>
* g-arrspl.adb: Ensure Finalize call is idempotent.
* g-arrspl.adb (Finalize): Makes the call idempotent.
Arnaud Charlet [Thu, 17 Oct 2013 14:06:56 +0000 (16:06 +0200)]
[multiple changes]
2013-10-17 Robert Dewar <dewar@adacore.com>
* sem_prag.adb (Record_Possible_Body_Reference): Fix test for
being in body.
(Add_Constituent): Merged into Check_Refined_Global_Item.
(Check_Matching_Constituent): A constituent that has the proper Part_Of
option and comes from a private child or a sibling is now collected.
(Check_Matching_Modes): Merged into Check_Refined_Global_Item.
(Check_Refined_Global_Item): Code cleanup.
(Collect_Constituent): New routine.
(Inconsistent_Mode_Error): Moved out from Check_Matching_Modes.
2013-10-17 Ed Schonberg <schonberg@adacore.com>
* freeze.adb (Check_Current_Instance, Process): Add RM reference
and mention immutably limited types, when the current instance
is illegal in Ada 2012.
2013-10-17 Ed Schonberg <schonberg@adacore.com>
* sem_warn.adb (Check_Unused_Withs): If the main unit is a
subunit, apply the check to the units mentioned in its context
only. This provides additional warnings on with_clauses that
are superfluous.
* sem_ch3.adb (Analyze_Declarations): Emit an
error message concerning state refinement when the spec defines at
least one non-null abstract state and the body's SPARK mode is On.
(Requires_State_Refinement): New routine.
2013-10-17 Robert Dewar <dewar@adacore.com>
* sem_ch7.ads: Comment fixes.
2013-10-17 Robert Dewar <dewar@adacore.com>
* sem_ch7.adb (Analyze_Package_Specification): Remove circuit
for ensuring that a package spec requires a body for some other
reason than that it contains the declaration of an abstract state.
2013-10-17 Tristan Gingold <gingold@adacore.com>
* exp_ch11.adb (Expand_N_Raise_Expression): Fix call of
Possible_Local_Raise.
2013-10-17 Thomas Quinot <quinot@adacore.com>
* exp_pakd.adb (Expand_Bit_Packed_Element_Set): Unchecked
conversion of Or_Rhs to Etype of New_Rhs is required only when
the latter is the result of a byte swap operation.
2013-10-17 Thomas Quinot <quinot@adacore.com>
* exp_dist.adb (Build_To_Any_Function): For a type with opaque
representation that is not transmitted as an unconstrained value,
use 'Write, not 'Output, to generate the opaque representation.
2013-10-17 Yannick Moy <moy@adacore.com>
* sem_res.adb (Resolve_Short_Circuit): Only
generate expression-with-action when full expansion is set.
2013-10-17 Yannick Moy <moy@adacore.com>
* debug.adb Remove obsolete comment.
2013-10-17 Thomas Quinot <quinot@adacore.com>
* exp_ch4.adb (Process_Transient_Object.Find_Enclosing_Contexts):
Avoid late insertion when expanding an expression with action
nested within a transient block; Do not inconditionally generate
a finalization call if the generated object is from a specific
branch of a conditional expression.
2013-10-17 Pascal Obry <obry@adacore.com>
* g-arrspl.adb: Ensure Finalize call is idempotent.
* g-arrspl.adb (Finalize): Makes the call idempotent.
* aspects.adb, aspects.ads, sem_prag.ads: Remove all entries
for Refined_Pre from the various tables.
* par-prag.adb: Remove the entry for Refined_Pre from the list
of pragmas not needing special processing by the parser.
* sem_ch13.adb (Analyze_Aspect_Specifications):
Remove the processing for aspect Refined_Pre.
(Check_Aspect_At_Freeze_Point): Remove the entry for aspect
Refined_Pre.
* sem_prag.adb (Analyze_Pragma): Refined_Pre is no longer a
valid assertion kind. Remove the analysis of pragma Refined_Pre.
(Analyze_Refined_Pragma): Update the comment on usage.
(Find_Related_Subprogram_Or_Body): Update the comment on
usage. Pragma Refined_Pre is no longer processed by this routine.
(Is_Valid_Assertion_Kind): Refined_Pre is no longer a valid
assertion kind.
* snames.ads-tmpl: Remove predefined name Refined_Pre. Remove
the pragma id for Refined_Pre.
* exp_util.adb, exp_util.ads (Entity_Of): Moved to Sem_Util.
* sem_prag.adb (Analyze_Global_In_Decl_List): Mark a null
item list as being analyzed.
(Analyze_Global_List): Mark a
null global list and multiple global items as being analyzed.
(Analyze_Input_Item): Check the unit that defines the input
variable or state, not the reference to it.
* sem_util.ads, sem_util.adb (Entity_Of): Moved from Exp_Util. Ensure
that the input has an entity.
Thomas Quinot [Thu, 17 Oct 2013 13:58:39 +0000 (13:58 +0000)]
exp_util.adb (Get_Current_Value_Condition, [...]): Handle the case of expressions with actions * exp_util.adb (Insert_Actions):...
2013-10-17 Thomas Quinot <quinot@adacore.com>
* exp_util.adb (Get_Current_Value_Condition,
Set_Current_Value_Condition): Handle the case of expressions
with actions * exp_util.adb (Insert_Actions): Handle the case
of an expression with actions whose Actions list is empty.
* exp_util.adb (Remove_Side_Effects.Side_Effect_Free): An
expression with actions that has no Actions and whose Expression
is side effect free is itself side effect free.
* exp_util.adb (Remove_Side_Effects): Do not set an incorrect etype on
temporary 'R' (Def_Id), which is in general an access to Exp_Type, not
an Exp_Type.
* sem_res.adb (Resolve): For an expression with
actions, resolve the expression early. * sem_res.adb
(Resolve_Expression_With_Actions): Rewrite an expression with
actions whose value is compile time known and which has no
actions into just its expression, so that its constant value is
available downstream.
* sem_res.adb (Resolve_Short_Circuit):
Wrap the left operand in an expression with actions to contain
any required finalization actions.
* exp_ch4.adb (Expand_Expression_With_Actions): For an
expression with actions returning a Boolean expression, ensure
any finalization action is kept within the Actions list.
* sem_warn.adb (Check_References, Check_Unset_Reference): add
missing circuitry to handle expressions with actions.
* checks.adb (Ensure_Valid): For an expression with actions,
insert the validity check on the Expression.
* sem_ch13.adb (Build_Static_Predicate.Get_RList): An expression
with actions that has a non-empty Actions list is not static. An
expression with actions that has an empty Actions list has the
static ranges of its Expression.
* sem_util.adb (Has_No_Obvious_Side_Effects): An expression with
actions with an empty Actions list has no obvious side effects
if its Expression itsekf has no obvious side effects.
Ed Schonberg [Thu, 17 Oct 2013 13:54:29 +0000 (13:54 +0000)]
sem_aux.ads, [...] (Is_Immutably_Limited_Type): Make predicate compatible with Ada 2012 definition
2013-10-17 Ed Schonberg <schonberg@adacore.com>
* sem_aux.ads, sem_aux.adb (Is_Immutably_Limited_Type): Make
predicate compatible with Ada 2012 definition
(Is_Limited_View): New name for previous version of
Is_Immutably_Limited_Type. Predicate is true for an untagged
record type with a limited component.
* exp_ch7.adb, exp_ch6.adb, exp_ch4.adb, exp_ch3.adb, exp_aggr.adb,
sem_util.adb, sem_res.adb, sem_prag.adb, sem_attr.adb, sem_ch8.adb,
sem_ch6.adb, sem_ch3.adb, exp_util.adb: Use Is_Limited_View
* freeze.adb Use Is_Immutably_Limited_Type to check the legality
of references to the current instance, Is_Limited_View otherwise.
Arnaud Charlet [Thu, 17 Oct 2013 13:50:34 +0000 (15:50 +0200)]
[multiple changes]
2013-10-17 Ed Schonberg <schonberg@adacore.com>
* sem_ch12.adb (Validated_Access_Subprogram_Instance): According
to AI05-288, actuals for access_to_subprograms must be subtype
conformant with the generic formal. Previous to AI05-288
only mode conformance was required, but the AI is a binding
interpretation that applies to previous versions of the language,
2013-10-17 Robert Dewar <dewar@adacore.com>
* gnat_ugn.texi: Minor text correction.
* ug_words: Add entry for -gnateu /IGNORE_UNRECOGNIZED.
* vms_data.ads: Add /IGNORE_UNRECOGNIZED for -gnateu.
* sem_prag.adb (Analyze_Constituent): Move the check
concerning option Part_Of to routine Check_Matching_Constituent.
(Check_Matching_Constituent): Verify that an abstract state
that acts as a constituent has the prope Part_Op option in
its aspect/pragma Abstract_State. Account for the case when a
constituent comes from a private child or private sibling.
* sem_util.ads, sem_util.adb (Is_Child_Or_Sibling): New routine.
* einfo.adb: Flag 159 is now known as From_Limited_With. Replace
all references to attribute From_With_Type with From_Limited_With.
(From_With_Type): Renamed to From_Limited_With.
(Set_From_With_Type): Renamd to Set_From_Limited_With.
* einfo.ads: Remove attribute From_With_Type and occurrences in
nodes. Add attribute From_Limited_With along with occurrences
in nodes.
(From_With_Type): Renamed to From_Limited_With along with pragma Inline.
(Set_From_With_Type): Renamed to
Set_From_Limited_With along with pragma Inline.
* sem_ch7.adb, sem_ch8.adb, sem_ch12.adb, sem_ch13.adb, sem_disp.adb,
sem_res.adb, sem_type.adb, sem_util.adb, sem_warn.adb,
exp_attr.adb, exp_disp.adb, freeze.adb, itypes.adb, layout.adb,
lib-writ.adb, rtsfind.adb, sem_attr.adb, sem_aux.adb, sem_ch3.adb,
sem_ch4.adb: Replace all references to attribute From_With_Type
with From_Limited_With.
* sem_ch6.adb: Replace all references to attribute From_With_Type
with From_Limited_With.
(Designates_From_With_Type): Renamed to Designates_From_Limited_With.
(Process_Formals): Update the call to Designates_From_With_Type.
* sem_ch10.adb: Replace all references to attribute From_With_Type
with From_Limited_With.
(Build_Limited_Views): Reimplemented.
* gcc-interface/decl.c Replace all references to attribute
From_With_Type with From_Limited_With.
(finalize_from_with_types): Renamed to finalize_from_limited_with.
* gcc-interface/gigi.h (finalize_from_with_types): Renamed to
finalize_from_limited_with.
* gcc-interface/trans.c: Replace all references to attribute
From_With_Type with From_Limited_With.
(Compilation_Unit_to_gnu): Update the call to finalize_from_with_types.
2013-10-17 Pascal Obry <obry@adacore.com>
* projects.texi: Update VCS_Kind documentation.
2013-10-17 Matthew Heaney <heaney@adacore.com>
* a-convec.adb, a-coinve.adb, a-cobove.adb (Insert, Insert_Space):
Inspect value range before converting type.
Arnaud Charlet [Thu, 17 Oct 2013 10:42:38 +0000 (12:42 +0200)]
[multiple changes]
2013-10-17 Vincent Celier <celier@adacore.com>
* gnat_ugn.texi: Remove VMS conversion of -gnatet and -gnateT,
now that they are both in ug_words.
* ug_words: Update qualifier for -gnatet Add qualifier for -gnateT
* vms_data.ads: Update qualifier for -gnatet Add qualifier
for -gnateT
* projects.texi: Continue to update the project documentation
for VMS.
2013-10-17 Robert Dewar <dewar@adacore.com>
* einfo.ads, einfo.adb (Has_Body_References): New flag.
(Body_References): New field.
* sem_prag.adb (Record_Possible_Body_Reference): New procedure
(Analyze_Input_Output): Call Record_Possible_Body_Reference
(Analyze_Global_Item): Call Record_Possible_Body_Reference
(Analyze_Refinement_Clause): Output messages if illegal global refs.
2013-10-17 Thomas Quinot <quinot@adacore.com>
* freeze.adb (Check_Component_Storage_Order): Reject a record or
array type that does not have an explicit Scalar_Storage_Order
attribute definition if a component of the record, or the
elements of the array, have one.
* gnat_rm.texi (attribute Scalar_Storage_Order): Document the above
rule.
Arnaud Charlet [Thu, 17 Oct 2013 10:37:17 +0000 (12:37 +0200)]
[multiple changes]
2013-10-17 Vincent Celier <celier@adacore.com>
* gnat_ugn.texi: Add examples of switches -gnateD, including
one where the value is a string.
* projects.texi: Do not convert switches in project files to
VMS qualifiers.
2013-10-17 Robert Dewar <dewar@adacore.com>
* sem_prag.adb (Report_Extra_Clauses): Don't complain about
refinements with null input since null should be considered to
always match.
Arnaud Charlet [Thu, 17 Oct 2013 10:32:09 +0000 (12:32 +0200)]
[multiple changes]
2013-10-17 Yannick Moy <moy@adacore.com>
* sem_ch8.adb (Find_Direct_Name): Keep track of assignments for
renamings in SPARK mode.
2013-10-17 Yannick Moy <moy@adacore.com>
* exp_spark.adb (Expand_SPARK): Remove special case for NOT IN
operation.
* sinfo.ads: Add special comment section to describe SPARK mode
effect on tree.
* exp_spark.ads: Remove comments, moved to sinfo.ads.
2013-10-17 Yannick Moy <moy@adacore.com>
* exp_ch3.adb (Expand_Freeze_Class_Wide_Type,
Expand_Freeze_Class_Wide_Type, Expand_Freeze_Class_Wide_Type):
Remove useless special cases.
* exp_ch4.adb (Expand_Allocator_Expression, Expand_N_Allocator,
Expand_N_Op_Expon): Remove useless special cases.
* exp_ch6.adb (Is_Build_In_Place_Function_Call): Disable build-in-place
in SPARK mode by testing Full_Expander_Active instead of
Expander_Active.
(Make_Build_In_Place_Call_In_Allocator): Remove useless special case.
* exp_util.adb (Build_Allocate_Deallocate_Proc): Remove
useless special case.
* sem_eval.adb (Compile_Time_Known_Value): Remove special handling of
deferred constant.
2013-10-17 Yannick Moy <moy@adacore.com>
* gnat_ugn.texi: Document -gnateT and target file format.
2013-10-17 Vincent Celier <celier@adacore.com>
* prep.adb (Check_Command_Line_Symbol_Definition): Is_A_String is
always False, even when the value starts and ends with double quotes.
Arnaud Charlet [Thu, 17 Oct 2013 10:28:53 +0000 (12:28 +0200)]
[multiple changes]
2013-10-17 Tristan Gingold <gingold@adacore.com>
* a-exexpr-gcc.adb: Synchronize declarations of other/all others.
2013-10-17 Thomas Quinot <quinot@adacore.com>
* exp_pakd.adb: Add missing guard protecting Reverse_Storage_Order
call.
* sem_res.adb: Minor code cleanup: use named parameter association
(not positional) for Boolean parameter Sec_Stack in calls to
Establish_Transient_Scope.
Richard Biener [Thu, 17 Oct 2013 09:59:47 +0000 (09:59 +0000)]
re PR tree-optimization/58143 (wrong code at -O3)
2013-10-17 Richard Biener <rguenther@suse.de>
PR tree-optimization/58143
* tree-ssa-loop-im.c (arith_code_with_undefined_signed_overflow):
New function.
(rewrite_to_defined_overflow): Likewise.
(move_computations_dom_walker::before_dom): Rewrite stmts
with undefined signed overflow that are not always executed
into unsigned arithmetic.
* gcc.dg/torture/pr58143-1.c: New testcase.
* gcc.dg/torture/pr58143-2.c: Likewise.
* gcc.dg/torture/pr58143-3.c: Likewise.
Michael Meissner [Wed, 16 Oct 2013 23:06:36 +0000 (23:06 +0000)]
re PR target/57756 (Function target attribute is retaining state of previously seen function)
2013-10-16 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/57756
* config/rs6000/rs6000.opt (rs6000_isa_flags_explicit): Move the
explicit isa flag to be an options variable, instead of using
global_options_set. Remove define from rs6000.h.
* config/rs6000/rs6000.h (rs6000_isa_flags_explicit): Likewise.
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Initialize rs6000_isa_flags_explicit.
(rs6000_function_specific_save): Add gcc_options* parameter, so
that the powerpc builds after the 2013-10-15 changes.
(rs6000_function_specific_restore): Likewise.
DJ Delorie [Wed, 16 Oct 2013 22:55:34 +0000 (18:55 -0400)]
rl78.c (rl78_alloc_address_registers_macax): Verify op is a REG before checking REGNO.
* config/rl78/rl78.c (rl78_alloc_address_registers_macax): Verify
op is a REG before checking REGNO.
(rl78_alloc_physical_registers): Verify pattern is a SET before
checking SET_SRC.
For CRIS ports, switch to soft-fp. Improve arit.c and longlong.h.
* config.host (cpu_type) <Setting default>: Add entry for
crisv32-*-*.
(tmake_file) <crisv32-*-elf, cris-*-elf, cris-*-linux*>
<crisv32-*-linux*>: Adjust.
* longlong.h: Wrap the whole CRIS section in a single
defined(__CRIS__) conditional. Add comment about add_ssaaaa
and sub_ddmmss.
(COUNT_LEADING_ZEROS_0): Define when count_leading_zeros is
defined.
[__CRIS__] (__umulsidi3): Define.
[__CRIS__] (umul_ppmm): Define in terms of __umulsidi3.
* config/cris/sfp-machine.h: New file.
* config/cris/umulsidi3.S: New file.
* config/cris/t-elfmulti (LIB2ADD_ST): Add umulsidi3.S.
* config/cris/arit.c (SIGNMULT): New macro.
(__Div, __Mod): Use SIGNMULT instead of naked multiplication.
* config/cris/mulsi3.S: Tweak to avoid redundant register-copying;
saving 3 out of originally 33 cycles from the fastest
path, 3 out of 54 from the medium path and one from the longest
path. Improve comments.
Sriraman Tallam [Tue, 15 Oct 2013 21:43:21 +0000 (21:43 +0000)]
re PR target/57756 (Function target attribute is retaining state of previously seen function)
PR target/57756
The root-cause of this PR is that global_options is not restored to
default before calling ix86_valid_target_attribute_tree and hence
target attributes are incorrectly processed sometimes.
This patch refactors code in i386.c in functions in the call-chain of
ix86_valid_target_attribute_tree to use any gcc_options struct passed
as a parameter. It replaces existing code which always uses the
global_options struct.
2013-10-15 Sriraman Tallam <tmsriram@google.com>
PR target/57756
* optc-save-gen.awk: Add extra parameter to the save and restore
target calls.
* opth-gen.awk: Generate new TARGET_* macros to accept a parameter.
* tree.c (build_optimization_node): New parameter. Add extra parameter
to call to cl_optimization_save.
(build_target_option_node): New parameter. Add extra parameter
to call to cl_target_option_save.
* tree.h (build_optimization_node): New parameter.
(build_target_option_node): New parameter.
* c-family/c-common.c (handle_optimize_attribute): Fix calls to
build_optimization_node and build_target_option_node.
* c-family/c-pragma.c (handle_pragma_optimize): Ditto.
(handle_pragma_push_options): Ditto.
* toplev.c (process_options): Ditto.
* opts.c (init_options_struct): Check for opts_set non-null.
* target.def (target_option.save): New parameter.
(target_option.restore): New parameter.
* tm.texi: Generate.
* config/i386/i386-c.c (ix86_target_macros_internal): Ditto.
(ix86_pragma_target_parse): Ditto.
* config/i386/i386-protos.h (ix86_valid_target_attribute_tree): New
parameters.
* config/rs6000/rs6000.c (rs6000_option_override_internal): Fix calls
to build_optimization_node and build_target_option_node.
(rs6000_valid_attribute_p): Ditto.
(rs6000_pragma_target_parse): Ditto.
* config/i386/i386.opt (x_ix86_target_flags_explicit): New TargetSave
data.
* config/i386/i386.h:
TARGET_64BIT_P: New Macro
TARGET_MMX_P: New Macro.
TARGET_3DNOW_P: New Macro.
TARGET_3DNOW_A_P: New Macro.
TARGET_SSE_P: New Macro.
TARGET_SSE2_P: New Macro.
TARGET_SSE3_P: New Macro.
TARGET_SSSE3_P: New Macro.
TARGET_SSE4_1_P: New Macro.
TARGET_SSE4_2_P: New Macro.
TARGET_AVX_P: New Macro.
TARGET_AVX2_P: New Macro.
TARGET_AVX512F_P: New Macro.
TARGET_AVX512PF_P: New Macro.
TARGET_AVX512ER_P: New Macro.
TARGET_AVX512CD_P: New Macro.
TARGET_FMA_P: New Macro.
TARGET_SSE4A_P: New Macro.
TARGET_FMA4_P: New Macro.
TARGET_XOP_P: New Macro.
TARGET_LWP_P: New Macro.
TARGET_ABM_P: New Macro.
TARGET_BMI_P: New Macro.
TARGET_BMI2_P: New Macro.
TARGET_LZCNT_P: New Macro.
TARGET_TBM_P: New Macro.
TARGET_POPCNT_P: New Macro.
TARGET_SAHF_P: New Macro.
TARGET_MOVBE_P: New Macro.
TARGET_CRC32_P: New Macro.
TARGET_AES_P: New Macro.
TARGET_PCLMUL_P: New Macro.
TARGET_CMPXCHG16B_P: New Macro.
TARGET_FSGSBASE_P: New Macro.
TARGET_RDRND_P: New Macro.
TARGET_F16C_P: New Macro.
TARGET_RTM_P: New Macro.
TARGET_HLE_P: New Macro.
TARGET_RDSEED_P: New Macro.
TARGET_PRFCHW_P: New Macro.
TARGET_ADX_P: New Macro.
TARGET_FXSR_P: New Macro.
TARGET_XSAVE_P: New Macro.
TARGET_XSAVEOPT_P: New Macro.
TARGET_LP64_P: New Macro.
TARGET_X32_P: New Macro.
TARGET_FPMATH_DEFAULT_P: New Macro.
TARGET_FLOAT_RETURNS_IN_80387_P: New Macro.
* config/i386/i386.c (ix86_option_override_internal): New parameters.
opts and opts_set.
Change ix86_tune_string to access opts->x_ix86_tune_string.
Change ix86_isa_flags to access opts->x_ix86_isa_flags.
Change ix86_arch_string to access opts->x_ix86_arch_string.
Change ix86_stringop_alg to access opts->x_ix86_stringop_alg.
Change ix86_pmode to access opts->x_ix86_pmode.
Change ix86_abi to access opts->x_ix86_abi.
Change ix86_cmodel to access opts->x_ix86_cmodel.
Change ix86_asm_dialect to access opts->x_ix86_asm_dialect.
Change ix86_isa_flags_explicit to access
opts->x_ix86_isa_flags_explicit.
Change ix86_dump_tunes to access opts->x_ix86_dump_tunes.
Change ix86_regparm to access opts->x_ix86_regparm.
Change ix86_branch_cost to access opts->x_ix86_branch_cost.
Change ix86_preferred_stack_boundary_arg to access
opts->x_ix86_preferred_stack_boundary_arg.
Change ix86_force_align_arg_pointer to access
opts->x_ix86_force_align_arg_pointer.
Change ix86_incoming_stack_boundar_arg to access
opts->x_ix86_incoming_stack_boundar_arg.
Change ix86_fpmath to access opts->x_ix86_fpmath.
Change ix86_veclibabi_type to access opts->x_ix86_veclibabi_type.
Change ix86_recip_name to access opts->x_ix86_recip_name.
Change ix86_stack_protector_guard to access
opts->x_ix86_stack_protector_guard.
Change ix86_tune_memcpy_strategy to access
opts->x_ix86_tune_memcpy_strategy.
Change ix86_tune_memset_strategy to access
opts->x_ix86_tune_memset_strategy.
Change global_options to access opts.
Change global_options_set to access opts_set.
Change TARGET_64BIT to TARGET_64BIT_P (opts->...)
Change TARGET_MMX to TARGET_MMX_P (opts->...)
Change TARGET_3DNOW to TARGET_3DNOW_P (opts->...)
Change TARGET_3DNOW_A to TARGET_3DNOW_A_P (opts->...)
Change TARGET_SSE to TARGET_SSE_P (opts->...)
Change TARGET_SSE2 to TARGET_SSE2_P (opts->...)
Change TARGET_SSE3 to TARGET_SSE3_P (opts->...)
Change TARGET_SSSE3 to TARGET_SSSE3_P (opts->...)
Change TARGET_SSE4_1 to TARGET_SSE4_1_P (opts->...)
Change TARGET_SSE4_2 to TARGET_SSE4_2_P (opts->...)
Change TARGET_AVX to TARGET_AVX_P (opts->...)
Change TARGET_AVX2 to TARGET_AVX2_P (opts->...)
Change TARGET_AVX512F to TARGET_AVX512F_P (opts->...)
Change TARGET_AVX512PF to TARGET_AVX512PF_P (opts->...)
Change TARGET_AVX512ER to TARGET_AVX512ER_P (opts->...)
Change TARGET_AVX512CD to TARGET_AVX512CD_P (opts->...)
Change TARGET_FMA to TARGET_FMA_P (opts->...)
Change TARGET_SSE4A to TARGET_SSE4A_P (opts->...)
Change TARGET_FMA4 to TARGET_FMA4_P (opts->...)
Change TARGET_XOP to TARGET_XOP_P (opts->...)
Change TARGET_LWP to TARGET_LWP_P (opts->...)
Change TARGET_ABM to TARGET_ABM_P (opts->...)
Change TARGET_BMI to TARGET_BMI_P (opts->...)
Change TARGET_BMI2 to TARGET_BMI2_P (opts->...)
Change TARGET_LZCNT to TARGET_LZCNT_P (opts->...)
Change TARGET_TBM to TARGET_TBM_P (opts->...)
Change TARGET_POPCNT to TARGET_POPCNT_P (opts->...)
Change TARGET_SAHF to TARGET_SAHF_P (opts->...)
Change TARGET_MOVBE to TARGET_MOVBE_P (opts->...)
Change TARGET_CRC32 to TARGET_CRC32_P (opts->...)
Change TARGET_AES to TARGET_AES_P (opts->...)
Change TARGET_PCLMUL to TARGET_PCLMUL_P (opts->...)
Change TARGET_CMPXCHG16B to TARGET_CMPXCHG16B_P (opts->...)
Change TARGET_FSGSBASE to TARGET_FSGSBASE_P (opts->...)
Change TARGET_RDRND to TARGET_RDRND_P (opts->...)
Change TARGET_F16C to TARGET_F16C_P (opts->...)
Change TARGET_RTM to TARGET_RTM_P (opts->...)
Change TARGET_HLE to TARGET_HLE_P (opts->...)
Change TARGET_RDSEED to TARGET_RDSEED_P (opts->...)
Change TARGET_PRFCHW to TARGET_PRFCHW_P (opts->...)
Change TARGET_ADX to TARGET_ADX_P (opts->...)
Change TARGET_FXSR to TARGET_FXSR_P (opts->...)
Change TARGET_XSAVE to TARGET_XSAVE_P (opts->...)
Change TARGET_XSAVEOPT to TARGET_XSAVEOPT_P (opts->...)
Change TARGET_LP64 to TARGET_LP64_P (opts->...)
Change TARGET_X32 to TARGET_X32_P (opts->...)
Change TARGET_FPMATH_DEFAULT to TARGET_FPMATH_DEFAULT_P (opts->...)
Change TARGET_FLOAT_RETURNS_IN_80387 to
TARGET_FLOAT_RETURNS_IN_80387_P (opts->...)
(ix86_function_specific_save): New parameter. Use opts-> fields
to replace global fields.
(ix86_function_specific_restore): Ditto.
(ix86_valid_target_attribute_inner_p): New parameters.
Fix recursive call.
Fix call to ix86_handle_option and set_option.
(ix86_valid_target_attribute_tree): New parameters.
Change global_options to access opts.
Change global_options_set to access opts_set.
Fix call to ix86_valid_target_attribute_inner_p.
Change ix86_tune_string to access opts->x_ix86_tune_string.
Change ix86_arch_string to access opts->x_ix86_arch_string.
Change ix86_fpmath to access opts->x_ix86_fpmath
Fix call to ix86_option_override_internal.
Fix call to ix86_add_new_builtins.
Fix calls to build_optimization_node and build_target_option_node.
(ix86_valid_target_attribute_p): Remove access to global_options.
Use new gcc_options structure func_options.
Fix call to ix86_valid_target_attribute_tree.
Fix call to build_optimization_node.
(get_builtin_code_for_version): Fix call to
ix86_valid_target_attribute_tree.
PR target/57756
* gcc.target/i386/pr57756.c: New test.
* gcc.target/i386/pr57756_2.c: New test.
gcc/
* Makefile.in (PICFLAG): New.
(enable_host_shared): New.
(INTERNAL_CFLAGS): Use PICFLAG.
(LIBIBERTY): Use pic build of libiberty.a if configured with
--enable-host-shared.
* configure.ac: Add --enable-host-shared, setting up new
PICFLAG variable.
* configure: Regenerate.
* doc/install.texi (--enable-shared): Add note contrasting it
with...
(--enable-host-shared): New option.
libbacktrace/
* configure.ac: Add --enable-host-shared, setting up
pre-existing PIC_FLAG variable within Makefile.am et al.
* configure: Regenerate.
Zhenqiang Chen [Tue, 15 Oct 2013 17:48:44 +0000 (17:48 +0000)]
tree-ssa-reassoc.c: Include rtl.h and tm_p.h.
* tree-ssa-reassoc.c: Include rtl.h and tm_p.h.
(optimize_range_tests_1): New function,
extracted from optimize_range_tests.
(optimize_range_tests_xor): Similarly.
(optimize_range_tests_diff): New function.
(optimize_range_tests): Use optimize_range_tests_1.
* gcc.dg/tree-ssa/reassoc-32.c: New test case.
* gcc.dg/tree-ssa/reassoc-33.c: New test case.
* gcc.dg/tree-ssa/reassoc-34.c: New test case.
* gcc.dg/tree-ssa/reassoc-35.c: New test case.
* gcc.dg/tree-ssa/reassoc-36.c: New test case.
Cong Hou [Tue, 15 Oct 2013 17:17:43 +0000 (13:17 -0400)]
tree-vect-loop.c (vect_is_simple_reduction_1): Relax the requirement of the reduction pattern so that one operand of the ...
2013-10-15 Cong Hou <congh@google.com>
* tree-vect-loop.c (vect_is_simple_reduction_1): Relax the
requirement of the reduction pattern so that one operand of the
reduction operation can come from outside of the loop.
Richard Biener [Tue, 15 Oct 2013 11:13:04 +0000 (11:13 +0000)]
lto.c (hash_canonical_type): Split out from ...
2013-10-15 Richard Biener <rguenther@suse.de>
lto/
* lto.c (hash_canonical_type): Split out from ...
(iterative_hash_canonical_type): ... here. Register types
we recurse to.
(gimple_canonical_type_hash): Adjust.
(gimple_register_canonical_type_1): Split out from ...
(gimple_register_canonical_type): ... here. Cache computed
hash value.
(lto_register_canonical_types): Split into two modes,
clearing and computing TYPE_CANONICAL.
(lto_read_decls): Adjust.
(read_cgraph_and_symbols): Do two passes over global trees,
first clearing then computing TYPE_CANONICAL.
Arnaud Charlet [Tue, 15 Oct 2013 11:01:03 +0000 (13:01 +0200)]
[multiple changes]
2013-10-15 Thomas Quinot <quinot@adacore.com>
* exp_pakd.adb (Expand_Packed_Element_Set,
Expand_Packed_Element_Reference): Adjust for the case of packed
arrays of reverse-storage-order types.
2013-10-15 Robert Dewar <dewar@adacore.com>
* sem_prag.adb: Minor reformatting.
2013-10-15 Ed Schonberg <schonberg@adacore.com>
* sem_attr.adb (Analyze_Attribute_Specification, case
To_Address): If the expression is an identifier, do not modify
its type; it will be converted when necessary, and the type of
the expression must remain consistent with that of the entity
for back-end consistency.
2013-10-15 Robert Dewar <dewar@adacore.com>
* sem_ch7.adb (Unit_Requires_Body): Add flag
Ignore_Abstract_State (Analyze_Package_Specification): Enforce
rule requiring Elaborate_Body if a non-null abstract state is
specified for a library-level package.
* sem_ch7.ads (Unit_Requires_Body): Add flag Ignore_Abstract_State.
* sem_prag.adb (Analyze_Constituent): When
a state acts as a constituent of another state, ensure that
the said state has a Part_Of dependency in its corresponding
aspect/pragma Abstract_State.
* atree.ads (New_Copy, Relocate_Node): Improve documentation
(note that these subprograms reset Is_Overloaded).
2013-10-15 Thomas Quinot <quinot@adacore.com>
* checks.adb (Check_Needed): Handle the case where the test in
the left operand of the short circuit is wrapped in a qualified
expression, type conversion, or expression with actions.
2013-10-15 Thomas Quinot <quinot@adacore.com>
* sem_type.adb, sem_type.ads (Save_Interps): Also propagate
Is_Overloaded to New_N, for consistency.
2013-10-15 Ed Schonberg <schonberg@adacore.com>
* a-tienau.adb (Put): Use file parameter to query values of
current column and line length.
Arnaud Charlet [Tue, 15 Oct 2013 10:29:47 +0000 (12:29 +0200)]
[multiple changes]
2013-10-15 Robert Dewar <dewar@adacore.com>
* sem_prag.adb, exp_ch11.adb, a-except-2005.adb, a-except-2005.ads:
Minor reformatting.
2013-10-15 Eric Botcazou <ebotcazou@adacore.com>
* targparm.ads: Fix minor typo in comment.
2013-10-15 Ed Schonberg <schonberg@adacore.com>
* lib-xref.adb: handle full views that are derived from private
types.
* sem_util.adb (Build_Elaboration_Entity): Do nothing in ASIS
mode: the elaboration entity is not in the source, and plays no
role in semantic analysis. Minor reformatting.
Arnaud Charlet [Tue, 15 Oct 2013 10:28:02 +0000 (12:28 +0200)]
[multiple changes]
2013-10-15 Tristan Gingold <gingold@adacore.com>
* adaint.c (__gnat_get_executable_load_address): Remove AIX
specific code.
2013-10-15 Ed Schonberg <schonberg@adacore.com>
* exp_aggr.adb (Aggr_Size_OK): Refine criteria to better handle
large static aggregates with static record components, to avoid
generating a large number of asignments. Conversely, improve
handling of aggregates initialized by a single association,
which are most efficiently implemented with a loop.
Richard Biener [Tue, 15 Oct 2013 10:21:32 +0000 (10:21 +0000)]
tree-loop-distribution.c (build_empty_rdg): Inline into single user.
2013-10-15 Richard Biener <rguenther@suse.de>
* tree-loop-distribution.c (build_empty_rdg): Inline into
single user.
(rdg_flag_vertex): Inline into single user.
(rdg_flag_vertex_and_dependent): Likewise.
(build_rdg_partition_for_vertex): Remove processed bitmap.
(rdg_build_partitions): Simplify.
projects / thirdparty / gcc.git / log
