Tom Gundersen [Fri, 28 Feb 2014 00:02:01 +0000 (01:02 +0100)]
networkd: add networkd-wait-online
This is mostly a proof of concept to try sd-network, so we don't
hook it up with a .service file quite yet. We probably want it to
be more clever about deciding when we are 'online'.
The binary will wait for at least one network managed by networkd,
and until all networks managed by networkd are configured.
Lukas Nykryn [Thu, 27 Feb 2014 10:06:37 +0000 (11:06 +0100)]
cdrom_id: use the old MMC fallback
https://bugzilla.redhat.com/show_bug.cgi?id=1038015
The problem seems to be that the your virtual DVD is emulating a really
old DVD device, and doing it kind of strangely.
> dracut:# /lib/udev/cdrom_id --debug /dev/sr0
> probing: '/dev/sr0'
> INQUIRY: [IMM ][Virtual CD/DVD ][0316]
> GET CONFIGURATION failed with SK=5h/ASC=24h/ACQ=00h
So your virtual drive rejects the GET CONFIGURATION command as illegal.
Other pre-MMC2 drives that don't accept this command usually return the
error
SK=5h,ASC=20h (invalid/unsupported command code), in which case cdrom_id
tries an older method, and then ID_CDROM_MEDIA_TRACK_COUNT_DATA gets set
and all the /dev/disk/by-label (etc) links get set up.
The virtual drive returns the error SK=5h,ASC=24h (invalid field in
Command Descriptor Block), which cdrom_id doesn't handle, so it gives up
and the links never get made.
The ideal solution would be to make the IMM to emulate a device that's
less than 15 years old, but I'm not going to hold my breath waiting for
that.
So probably cdrom_id should also use the old MMC fallback when the error
is SK=5h,ASC=24h, and then all of this would work as expected.
Armin K [Wed, 26 Feb 2014 14:02:55 +0000 (15:02 +0100)]
build-sys: Do not distribute generated udev service files
They are already in nodist_systemunit_DATA and if they are
shipped, they contain hardcoded paths to udevadm and
systemd-udevd which will cause them to fail to start when
rootprefix != prefix and rootlibdir != libdir.
Uoti Urpala [Thu, 20 Feb 2014 01:00:09 +0000 (03:00 +0200)]
logs-show: fix corrupt output with empty messages
If a message had zero length, journalctl would print no newline, and
two output lines would be concatenated. Fix. The problem was
introduced in commit 31f7bf199452 ("logs-show: print multiline
messages"). Affected short and verbose output modes.
Before fix:
Feb 09 21:16:17 glyph dhclient[1323]: Feb 09 21:16:17 glyph NetworkManager[788]: <info> (enp4s2): DHCPv4 state changed nbi -> preinit
after:
Feb 09 21:16:17 glyph dhclient[1323]:
Feb 09 21:16:17 glyph NetworkManager[788]: <info> (enp4s2): DHCPv4 state changed nbi -> preinit
Some specifications we want to stay compatibility actually document
/var/run, not /run, and we should stay compatible with that. In order to
make sure our D-Bus implementation works on any system, regardless if
running systemd or not, we should always use /var/run which is the
only path mandated by the D-Bus spec.
Similar, glibc hardcodes the utmp location to /var/run, and this is
exposed in _UTMP_PATH in limits.h, hence let's stay in sync with this
public API, too.
We simply do not support systems where /var/run is not a symlink → /run.
Hence both are equivalent. Staying compatible with upstream
specifications hence weighs more than cleaning up superficial
appearance.
This new unit settings allows restricting which address families are
available to processes. This is an effective way to minimize the attack
surface of services, by turning off entire network stacks for them.
This is based on seccomp, and does not work on x86-32, since seccomp
cannot filter socketcall() syscalls on that platform.
David Herrmann [Tue, 25 Feb 2014 12:08:24 +0000 (13:08 +0100)]
login: set pos-slot to fallback on pos-eviction
If we evict a session position, we open the position slot for future
sessions. However, there might already be another session on the same
position if both were started on the same VT. This is currently done if
gdm spawns the session on its own Xserver.
Hence, look for such a session on pos-eviction and claim the new slot
immediately.
David Herrmann [Tue, 25 Feb 2014 11:20:25 +0000 (12:20 +0100)]
login: fix pos-array allocation
GREEDY_REALLOC takes a pointer to the real size, not the array-width as
argument. Therefore, our array is currently way to small to keep the seat
positions.
Introduce GREEDY_REALLOC0_T() as typed version of GREEDY_REALLOC and store
the array-width instead of array-size.
Łukasz Stelmach [Wed, 19 Feb 2014 15:39:04 +0000 (16:39 +0100)]
smack: relabel directories and files created by systemd
Systemd creates directories in /dev. These directories will
get the label of systemd, which is the label of the System
domain, which is not accessable to everyone. Relabel the
directories, files and symlinks created so that they can be
generally used.
Based on a patch by Casey Schaufler <casey@schaufler-ca.com>.
getty-generator: verify ttys before we make use of them
The ttyS[0-3] devices are weird. They may be enumerated, but when one
actually tries to open and use them they return EIO, because they don't
actually exist. Because they may be enumerated they may be specified on
the kernel command line as console=. And some people do that as default.
As response to that we'll spawn a getty on the tty that will quickly
fail, and we retry a couple of time before giving up. That is quite
noisy.
With this new change we will validate all serial terminals configured
with console= on the kernel cmdline before adding gettys on them, and
remove the invalid ones. THis should remove the noise later on.
Tom Gundersen [Mon, 24 Feb 2014 00:09:21 +0000 (01:09 +0100)]
sd-dhcp-client: respect TP_STATUS_CSUMNOTREADY
If an UDP packet has not passed through a hardware device, its checksum may not
have been computed. This is exposed through the TP_STATUS_CSUMNOTREADY sockopt.
When using raw sockets, skip checksum validation when TP_STATUS_CSUMNOTREADY
is set.
This is necessary for dhcp to work directly over a veth tunnel, e.g. as done
in systemd-nspawn.
core: clean up some confusing regarding SI decimal and IEC binary suffixes for sizes
According to Wikipedia it is customary to specify hardware metrics and
transfer speeds to the basis 1000 (SI decimal), while software metrics
and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary).
So far we specified everything in IEC, let's fix that and be more
true to what's otherwise customary. Since we don't want to parse "Mi"
instead of "M" we document each time what the context used is.
Kay Sievers [Sat, 22 Feb 2014 23:46:26 +0000 (00:46 +0100)]
src/shared/ cannot reference symbols from libraries
../src/shared/unit-name.c:462: error: undefined reference to 'sd_bus_label_escape'
../src/shared/unit-name.c:477: error: undefined reference to 'sd_bus_label_unescape'
collect2: error: ld returned 1 exit status