H.J. Lu [Thu, 12 Dec 2019 19:56:06 +0000 (11:56 -0800)]
i386: Align branches within a fixed boundary
Add 3 command-line options to align branches within a fixed boundary
with segment prefixes or NOPs:
1. -malign-branch-boundary=NUM aligns branches within NUM byte boundary.
2. -malign-branch=TYPE[+TYPE...] specifies types of branches to align.
The supported branches are:
a. Conditional jump.
b. Fused conditional jump.
c. Unconditional jump.
d. Call.
e. Ret.
f. Indirect jump and call.
3. -malign-branch-prefix-size=NUM aligns branches with NUM segment
prefixes per instruction.
3 new rs_machine_dependent frag types are added:
1. BRANCH_PADDING. The variable size frag to insert NOP before branch.
2. BRANCH_PREFIX. The variable size frag to insert segment prefixes to
an instruction. The choices of prefixes are:
a. Use the existing segment prefix if there is one.
b. Use CS segment prefix in 64-bit mode.
c. In 32-bit mode, use SS segment prefix with ESP/EBP base register
and use DS segment prefix without ESP/EBP base register.
3. FUSED_JCC_PADDING. The variable size frag to insert NOP before fused
conditional jump.
The new rs_machine_dependent frags aren't inserted if the previous item
is a prefix or a constant directive, which may be used to hardcode an
instruction, since there is no clear instruction boundary. Segment
prefixes and NOP padding are disabled before relaxable TLS relocations
and tls_get_addr calls to keep TLS instruction sequence unchanged.
md_estimate_size_before_relax() and i386_generic_table_relax_frag() are
used to handled BRANCH_PADDING, BRANCH_PREFIX and FUSED_JCC_PADDING frags.
i386_generic_table_relax_frag() grows or shrinks sizes of segment prefix
and NOP to align the next branch frag:
1. First try to add segment prefixes to instructions before a branch.
2. If there is no sufficient room to add segment prefixes, NOP will be
inserted before a branch.
* config/tc-i386.c (_i386_insn): Add has_gotpc_tls_reloc.
(tls_get_addr): New.
(last_insn): New.
(align_branch_power): New.
(align_branch_kind): New.
(align_branch_bit): New.
(align_branch): New.
(MAX_FUSED_JCC_PADDING_SIZE): New.
(align_branch_prefix_size): New.
(BRANCH_PADDING): New.
(BRANCH_PREFIX): New.
(FUSED_JCC_PADDING): New.
(i386_generate_nops): Support BRANCH_PADDING and FUSED_JCC_PADDING.
(md_begin): Abort if align_branch_prefix_size <
MAX_FUSED_JCC_PADDING_SIZE.
(md_assemble): Set last_insn.
(maybe_fused_with_jcc_p): New.
(add_fused_jcc_padding_frag_p): New.
(add_branch_prefix_frag_p): New.
(add_branch_padding_frag_p): New.
(output_insn): Generate a BRANCH_PADDING, FUSED_JCC_PADDING or
BRANCH_PREFIX frag and terminate each frag to align branches.
(output_disp): Set i.has_gotpc_tls_reloc to TRUE for GOTPC and
relaxable TLS relocations.
(output_imm): Likewise.
(i386_next_non_empty_frag): New.
(i386_next_jcc_frag): New.
(i386_classify_machine_dependent_frag): New.
(i386_branch_padding_size): New.
(i386_generic_table_relax_frag): New.
(md_estimate_size_before_relax): Handle COND_JUMP_PADDING,
FUSED_JCC_PADDING and COND_JUMP_PREFIX frags.
(md_convert_frag): Handle BRANCH_PADDING, BRANCH_PREFIX and
FUSED_JCC_PADDING frags.
(OPTION_MALIGN_BRANCH_BOUNDARY): New.
(OPTION_MALIGN_BRANCH_PREFIX_SIZE): New.
(OPTION_MALIGN_BRANCH): New.
(md_longopts): Add -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(md_parse_option): Handle -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(md_show_usage): Display -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(i386_target_format): Set tls_get_addr.
(i386_cons_align): New.
* config/tc-i386.h (i386_cons_align): New.
(md_cons_align): New.
(i386_generic_table_relax_frag): New.
(md_generic_table_relax_frag): New.
(i386_tc_frag_data): Add u, padding_address, length,
max_prefix_length, prefix_length, default_prefix, cmp_size,
classified and branch_type.
(TC_FRAG_INIT): Initialize u, padding_address, length,
max_prefix_length, prefix_length, default_prefix, cmp_size,
classified and branch_type.
* doc/c-i386.texi: Document -malign-branch-boundary=,
-malign-branch= and -malign-branch-prefix-size=.
H.J. Lu [Thu, 12 Dec 2019 19:54:31 +0000 (11:54 -0800)]
gas: Add md_generic_table_relax_frag
Add md_generic_table_relax_frag for TC_GENERIC_RELAX_TABLE targets so
that a backend can extend relax_frag beyond TC_GENERIC_RELAX_TABLE.
* write.c (md_generic_table_relax_frag): New. Defined to
relax_frag if not defined.
(relax_segment): Call md_generic_table_relax_frag instead of
relax_frag.
Tom Tromey [Thu, 12 Dec 2019 13:09:40 +0000 (06:09 -0700)]
Fix the thread-pool.c compilation
A recent commit removed DIAGNOSTIC_IGNORE_UNUSED_FUNCTION, which was
used in thread-pool.c. This patch changes this code to use
ATTRIBUTE_UNUSED instead.
Tested by rebuilding.
gdb/ChangeLog
2019-12-12 Tom Tromey <tromey@adacore.com>
* gdbsupport/thread-pool.c (set_thread_name): Use
ATTRIBUTE_UNUSED.
Luis Machado [Wed, 11 Dec 2019 14:55:49 +0000 (11:55 -0300)]
Fix unused function error
Attempting to build GDB in Ubuntu 16.04.6 LTS on x86_64, I ran into warnings
that caused the build to fail:
binutils-gdb/gdb/gdbsupport/safe-strerror.c:44:1: error: ‘char* select_strerror_r(char*, char*)’ defined but not used [-Werror=unused-function] select_strerror_r (char *res, char *)
The diagnostic macro DIAGNOSTIC_IGNORE_UNUSED_FUNCTION seems to expand
correctly to its respective pragma, but this doesn't seem to have an effect on
the warning. I tried to use the pragma explicitly and got the same result.
ATTRIBUTE_UNUSED works fine in this case if you put it in both functions,
which should fix warnings for both gdb and gdbserver builds.
The compiler version is gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609.
To prevent other developers from attempting to use this macro, only to get
confused by it not working as expected, it seems better to not define this
particular macro.
gdb/ChangeLog:
2019-12-12 Luis Machado <luis.machado@linaro.org>
* gdbsupport/safe-strerror.c: Don't include diagnostics.h.
(select_strerror_r): Use ATTRIBUTE_UNUSED instead of the diagnostics
macros.
Alan Modra [Thu, 12 Dec 2019 06:17:21 +0000 (16:47 +1030)]
obj-evax.c tidy
This started out as fixing decode_16, which used a char to index a 256
byte decodings array. When char is signed that could result in an out
of bounds array access. The rest of the patch is for consistency and
just general cleanup.
* config/obj-evax.c (crc32, encode_32, encode_16, decode_16):
Remove unnecessary prototypes.
(number_of_codings): Delete, use ARRAY_SIZE instead throughout.
(codings, decodings): Make arrays of unsigned char.
(crc32): Use unsigned variables. Delete unnecessary mask.
(encode_32, encode_16): Return unsigned char*, and make static
buffer an unsigned char array.
(decode_16): Make arg an unsigned char*. Remove useless casts.
(shorten_identifier): Use unsigned char crc_chars.
(is_truncated_identifier): Make ptr an unsigned char*.
Tom Tromey [Thu, 12 Dec 2019 02:17:47 +0000 (19:17 -0700)]
Fix TUI test suite regexps
Testing on another TUI series showed that some of the regexps in the
TUI test suite have been incorrect for a while. In particular, "|"
was meant literally in these tests, but was interpreted as pattern
alternation due to lack of quoting.
This patch fixes the bad tests. I am checking this in.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
Tom Tromey [Sat, 26 Oct 2019 22:37:32 +0000 (16:37 -0600)]
Change "winheight" resizing to use new layout code
The "winheight" command resizes a specified window, resizing the other
windows in the layout to adapt. In the current code, this is done by
examining each possible layout separately. The new layout code has a
more general approach to handling this, and this patch simply removes
the old code in favor of a call into the new layout engine.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
Tom Tromey [Thu, 10 Oct 2019 03:18:31 +0000 (21:18 -0600)]
Re-apply the current layout when resizing
The TUI has separate code for each possible layout to handle the case
where the terminal window is resized. With the new layout code, this
can all be replaced with a call to tui_apply_current_layout, which
simply re-applies the current layout.
This results in some small differences in behavior when resizing, so
some tests are updated.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
Tom Tromey [Tue, 8 Oct 2019 00:03:02 +0000 (18:03 -0600)]
Introduce new layout code
This introduces a new approach to window layout for the TUI. The idea
behind this code is that a layout should be specified in a declarative
way, and then be applied by generic code that does not need to know
the specifics of every possible layout.
This patch itself does not change any behavior, because the new layout
engine isn't yet connected to anything. That is, this merely
introduces the implementation.
This generic approach makes the code more maintainable. It also
enables some future changes:
* New window types are simpler to add;
* User-specified layouts are possible; and
* Horizontal layouts are more attainable
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (class tui_layout_base)
(class tui_layout_window, class tui_layout_split): New.
* tui/tui-layout.c (tui_get_window_by_name)
(tui_layout_window::clone, tui_layout_window::apply)
(tui_layout_window::get_sizes, tui_layout_window::add_split)
(tui_layout_split::add_window, tui_layout_split::clone)
(tui_layout_split::get_sizes)
(tui_layout_split::set_weights_from_heights)
(tui_layout_split::adjust_size, tui_layout_split::apply): New
functions.
(tui_layout_split::add_split, tui_layout_split::add_split)
(tui_layout_split::set_weights_from_heights)
(tui_layout_split::set_weights_from_heights): New functions.
Tom Tromey [Sat, 26 Oct 2019 22:00:01 +0000 (16:00 -0600)]
Remove struct tui_point
struct tui_point does not help very much. It is only used for
storage, and never passed between functions. I think it makes the
code more verbose without any corresponding benefit, so this patch
removes it.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
Tom Tromey [Mon, 7 Oct 2019 23:36:49 +0000 (17:36 -0600)]
Introduce the tui_gen_win_info::min_height method
This introduces a new method, tui_gen_win_info::min_height, to fetch
the minimum height of a window. This is used in the subsequent
unified layout patch.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
Tom Tromey [Wed, 6 Nov 2019 00:12:04 +0000 (17:12 -0700)]
Move can_box to tui_gen_win_info
This moves the can_box method to tui_gen_win_info, so that it will be
available on the tui_locator_window class. This will be used in a
subsequent patch.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
Tom Tromey [Mon, 7 Oct 2019 22:59:02 +0000 (16:59 -0600)]
Move max_height method to tui_gen_win_info
This moves the max_height method to tui_gen_win_info and implements it
in the subclasses. This is used by a subsequent patch, which will
normalize window layout across all window types.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-stack.h (struct tui_locator_window) <max_height>: New
method.
* tui/tui-regs.h (struct tui_data_item_window) <max_height>: New
method.
* tui/tui-data.h (struct tui_gen_win_info) <max_height>: New
method.
(struct tui_win_info) <max_height>: Now override.
Tom Tromey [Tue, 10 Dec 2019 21:16:19 +0000 (14:16 -0700)]
Fix build on macOS
PR build/25268 points out that the build fails on macOS, because on
macOS the "pthread_setname_np" function takes a single argument.
This patch fixes the problem, by introducing a new adapter function
that handles both styles of pthread_setname_np.
This change also meant moving the pthread_setname_np call to the
thread function, because macOS only permits setting the name of the
current thread. This means that there can be a brief window when gdb
will see the wrong name; but I think this is a minor concern.
Tested by rebuilding on x86-64 Fedora 30, and on macOS High Sierra.
On Linux I also debugged gdb to ensure that the thread names are still
set correctly.
gdb/ChangeLog
2019-12-11 Tom Tromey <tromey@adacore.com>
Tom Tromey [Wed, 11 Dec 2019 14:58:46 +0000 (07:58 -0700)]
Fix the build after bfd_get_signed_8 change
A recent commit changed bfd_get_signed_8 to extend the result to a
bfd_signed_vma. This caused a compiler error in one spot in my
--enable-targets=all gdb build, where the result of bfd_get_signed_8
was passed to printf.
This patch fixes the build. Tested by rebuilding.
gdb/ChangeLog
2019-12-11 Tom Tromey <tromey@adacore.com>
* fbsd-tdep.c (fbsd_core_info_proc_status): Cast result of
bfd_get_signed_8.
Jan Beulich [Wed, 11 Dec 2019 08:42:29 +0000 (09:42 +0100)]
x86: further refine SSE check (SSE4a, SHA, GFNI)
In ("x86: extend SSE check to PCLMULQDQ, AES, and GFNI insns") I went
both a little too far and not quite far enough:
- GFNI insns also have AVX512 variants, which also shouldn't get
diagnosed,
- SSE4a insns should get diagnosed just like SSE4.x ones,
- SHA insns should get diagnosed just like PCLMULQDQ or AES ones.
Implement 'print -raw-values' and 'set print raw-values on|off'
The option framework documentation was speaking about a 'print -raw'
option, but this option does not exist.
This patch implements -raw-values option that tells to ignore the
active pretty printers when printing a value.
As we already have -raw-frame-arguments, I thought -raw-values
was more clear, in particular to differentiate
set print raw-values and set print raw-frame-arguments.
gdb/doc/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Command Options): Use -p and -pretty in the example,
as -r is ambiguous. Update the print - TAB TAB completion result.
(Data): Document new option -raw-values. Use -p and -pretty in the
example, as -r is ambiguous.
(Print Settings): Document set print raw values.
(Pretty-Printer Commands): Document interaction between enabled
pretty printers and -raw-values/-raw-frame-arguments.
gdb/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Document -raw-values option and the related setting commands.
* printcmd.c (print_command_parse_format): Do not set opts->raw off,
only set it on when /r is given.
* valprint.c (value_print_option_defs): New element raw-values.
* Makefile.in: Add the new file.
gdb/testsuite/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/options.exp: Add -raw-values in the print completion list.
* gdb.python/py-prettyprint.exp: Add tests for -raw-values.
Alan Modra [Tue, 10 Dec 2019 12:52:10 +0000 (23:22 +1030)]
ubsan: cris: signed integer overflow
This was the following in print_with_operands
case 4:
number
= buffer[2] + buffer[3] * 256 + buffer[4] * 65536
+ buffer[5] * 0x1000000;
and buffer[5] * 0x1000000 can indeed overflow. So to fix this we need
to use unsigned arithmetic where overflow semantics are specified.
But number is a long, and the expression is int which will be sign
extended to long. If we make the expression unsigned it will be zero
extended. So make number an int32_t and rearrange a little for some
of the places that need fixing.
* cris-dis.c (print_with_operands): Avoid signed integer
overflow when collecting bytes of a 32-bit integer.
Alan Modra [Tue, 10 Dec 2019 12:32:37 +0000 (23:02 +1030)]
ubsan: cr16: left shift cannot be represented in type 'int'
This was:
unsigned long mask = SBM (instruction->match_bits);
with
#define SBM(offs) ((((1 << (32 - offs)) -1) << (offs)))
Well, there are a couple of problems. Firstly, the expression uses
int values (1 rather than 1u or 1ul) resulting in the ubsan error, and
secondly, a zero offs will result in a 32-bit shift which is undefined
if ints are only 32 bits.
Alan Modra [Tue, 10 Dec 2019 12:02:06 +0000 (22:32 +1030)]
ubsan: bfin: shift exponent is too large
This was the following in fmtconst_val, x is unsigned int.
x = SIGNEXTEND (x, constant_formats[cf].nbits);
Problem is, the SIGNEXTEND macro assumed its arg was a long and sign
extended by shifting left then shifting right, and didn't cast the
arg. So don't do the silly shift thing. It's not guaranteed to work
anyway according to the C standard. ">>" might do a logical shift
even if its args are signed.
* bfin-dis.c (HOST_LONG_WORD_SIZE, XFIELD): Delete.
(SIGNBIT): New.
(MASKBITS, SIGNEXTEND): Rewrite.
(fmtconst): Don't use ? expression now that SIGNEXTEND uses
unsigned arithmetic, instead assign result of SIGNEXTEND back
to x.
(fmtconst_val): Use 1u in shift expression.
Alan Modra [Tue, 10 Dec 2019 07:42:28 +0000 (18:12 +1030)]
ubsan: xtensa: left shift cannot be represented in type 'int'
In Operand_soffsetx4_decode:
soffsetx4_0 = 0x4 + ((((int) offset_0 << 14) >> 14) << 2);
and other places.
Don't sign extend with shifts! This file also has many occurrences of
truncation via shifts, which aren't a problem due to using uint32, but
I dislike on principle enough to fix.
* xtensa-modules.c (Field_* functions): Don't mask using shifts.
(Operand_soffsetx4_decode, Operand_simm4_decode),
(Operand_simm8_decode, Operand_simm8x256_decode),
(Operand_simm12b_decode, Operand_label8_decode),
(Operand_label12_decode, Operand_soffset_decode),
(Operand_xt_wbr15_label_decode, Operand_xt_wbr18_label_decode): Don't
sign extend using shifts.
(Operand_immrx4_decode, Operand_uimm16x4_decode): Avoid UB in
constant.
Alan Modra [Tue, 10 Dec 2019 07:36:09 +0000 (18:06 +1030)]
ubsan: epiphany: left shift of negative value
Two places in epiphany_cgen_extract_operand, "value" is a long.
value = ((((value) << (1))) + (pc));
cpu/
* epiphany.cpu (f-simm8, f-simm24): Use multiply rather than
shift left to avoid UB on left shift of negative values.
opcodes/
* epiphany-ibld.c: Regenerate.
Tom Tromey [Wed, 20 Nov 2019 23:07:46 +0000 (16:07 -0700)]
Minor fix to gdb.prompt documentation
I noticed that an example in the gdb.prompt documentation used the
wrong kind of quotes -- because it is code, it should use a plain
ASCII quotation mark. I also slightly shortened the sample text here,
so it would more clearly fit on a single line.
gdb/doc/ChangeLog
2019-12-10 Tom Tromey <tom@tromey.com>
* python.texi (gdb.prompt): Use correct quotes in example.
Shorten sample text.
Kevin Buettner [Wed, 20 Sep 2017 22:40:14 +0000 (15:40 -0700)]
OpenMP parallel region scope tests
Add tests which check for accessibility of variables from within
various OpenMP parallel regions.
Tested on Fedora 27, 28, 29, 30, and 31. I also tested with my OpenMP
work on Fedora 30. The test has been annotated with setup_xfail and
setup_kfail statements so that there are no unexpected failures on any
of these platforms when using gcc. Better still, for my own testing
anyway, is that there are also no XPASSes or KPASSes either. So,
regardless of platform, when using gcc, and regardless of whether my
(not yet public) OpenMP work is used, seeing a FAIL indicates a real
problem.
Fedora 27 results:
# of expected passes 85
# of expected failures 65
(Note: I have not retested F27 since v1 of the patch; it's possible
that the numbers will be slightly different for v2.)
Fedora 28, 29, 30 results:
# of expected passes 131
# of expected failures 4
# of known failures 16
Fedora 30, 31 results w/ my OpenMP work:
# of expected passes 151
The above results all use gcc, either the system gcc or a development
gcc (when testing against my OpenMP work in GDB). I've also tested
with clang 9.0.0 and icc 19.0.5.281 20190815 on Fedora 31.
Fedora 31, clang:
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print s3
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print i1
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print i3
FAIL: gdb.threads/omp-par-scope.exp: single_scope: second thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: single_scope: second thread: print s3
FAIL: gdb.threads/omp-par-scope.exp: single_scope: second thread: print i1
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i02
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i11
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i12
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i22
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: second thread: print i11
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: second thread: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: after parallel: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print l
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 2nd stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 2nd stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print l
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 4th stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 4th stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: outer_threads: outer stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: outer_threads: outer stop: print i
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: outer_threads: outer stop: print j
For both clang and icc, it turns out that there are some problems with
the DWARF that these compilers generate. Of the two, icc does at
least nest the subprogram of the outlined function representing the
parallel region within the function that it's defined, but does not
handle inner scopes if they exist. clang places the subprogram for
the outlined function at the same level as the containing function, so
variables declared within the function aren't visible at all.
I could call setup_xfail to avoid FAILs for clang and icc also, but I don't
want to further complicate the test.
gdb/testsuite/ChangeLog:
* gdb.threads/omp-par-scope.c: New file.
* gdb/threads/omp-par-scope.exp: New file.
Kevin Buettner [Sat, 9 Nov 2019 18:09:41 +0000 (11:09 -0700)]
Add gdb_caching_proc support_nested_function_tests to lib/gdb.exp
This commit adds the gdb_caching_proc, support_nested_function_tests,
to lib/gdb.exp. It tests to see whether or not the C compiler has
support for nested function calls.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (support_nested_function_tests): New proc.
Replace the remaining uses of strerror with safe_strerror
To do that, this patch makes IPA compile safe-strerror as well. Because
it doesn't use Gnulib, it calls the Glibc version of strerror_r directly.
Consequently this patch also removes the configure checks for strerror.
gdb/ChangeLog:
2019-12-10 Christian Biesinger <cbiesinger@google.com>
* config.in: Regenerate.
* configure: Regenerate.
* gdbsupport/agent.c (gdb_connect_sync_socket): Call
safe_strerror instead of strerror.
* gdbsupport/common.m4: Don't check for strerror.
* gdbsupport/safe-strerror.c: Support both the glibc version
of strerror_r and the XSI version.
gdb/gdbserver/ChangeLog:
2019-12-10 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Add safe-strerror.c to gdbreplay and IPA, and change
UNDO_GNULIB_CFLAGS to undo strerror_r instead of strerror.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Don't check for strerror.
* linux-i386-ipa.c (initialize_fast_tracepoint_trampoline_buffer):
Call safe_strerror instead of strerror.
* server.h (strerror): Remove this now-unnecessary declaration.
* tracepoint.c (init_named_socket): Call safe_strerror instead of
strerror.
(gdb_agent_helper_thread): Likewise.
* utils.c (perror_with_name): Likewise.
Andre Vieira [Tue, 10 Dec 2019 16:10:17 +0000 (16:10 +0000)]
[gas][arm] Set context table for '.arch_extension'
This patch fixes .arch_extension behaviour.
Currently, context table for '.arch_extension' is only set while
"-march" processing, but it is not set while .arch processing,
so following code is rejected
Tom Tromey [Tue, 3 Dec 2019 20:31:21 +0000 (13:31 -0700)]
Normalize Ada ptype to use a single "?"
Sometimes -- notably with unchecked unions -- the Ada "ptype" code
will print a "?" or "??" to indicate something unknown. The choice of
what was printed was somewhat arbitrary, and in one case, Ada would
print an empty string rather than "?".
This patch normalizes the Ada code to use "?" rather than an empty
string or "??". My reasoning here is that a single question mark is
enough to convey unknown-ness.
gdb/ChangeLog
2019-12-10 Tom Tromey <tromey@adacore.com>
* ada-typeprint.c (print_choices): Use a single "?".
(print_variant_part): Print "?" if the discriminant name
is not known.
gdb/testsuite/ChangeLog
2019-12-10 Tom Tromey <tromey@adacore.com>
* gdb.ada/unchecked_union.exp: New file.
* gdb.ada/unchecked_union/pck.adb: New file.
* gdb.ada/unchecked_union/pck.ads: New file.
* gdb.ada/unchecked_union/unchecked_union.adb: New file.
* gdb-utils.exp (string_to_regexp): Also quote "?".
Alan Modra [Mon, 9 Dec 2019 12:16:26 +0000 (22:46 +1030)]
Use disassemble_info.private_data in place of insn_sets
No cgen target uses private_data. This patch removes a
disassemble_info field that is only used by cgen, and instead uses
private_data. It also removes a macro that is no longer used.
Alan Modra [Mon, 9 Dec 2019 12:27:15 +0000 (22:57 +1030)]
Remove backup ppc struct dis_private.
ppc-dis.c used a global struct whenever malloc failed to provide the
eight bytes of memory necessary for struct dis_private. Which is
quite ridiculous. If that malloc failed there is zero chance some
other malloc won't fail too.
* ppc-dis.c (private): Delete variable.
(get_powerpc_dialect): Don't segfault on NULL info->private_data.
(powerpc_init_dialect): Don't use global private.
* objdump.c (struct objdump_disasm_info): Delete "sec".
(find_symbol_for_address): Use inf->section rather than aux->sec.
(objdump_print_addr, disassemble_bytes): Likewise.
(disassemble_section): Don't set aux->sec.
George Barrett [Mon, 9 Dec 2019 21:28:39 +0000 (08:28 +1100)]
Fix scripted probe breakpoints
The documentation for make-breakpoint from the Guile API and the `spec'
variant of the gdb.Breakpoint constructor from the Python API state that
the format acceptable for location strings is the same as that accepted
by the break command. However, using the -probe qualifier at the
beginning of the location string causes a GDB internal error as it
attempts to decode a probe location in the wrong code path. Without this
functionality, there doesn't appear to be another way to set breakpoints
on probe points from Python or Guile scripts.
This patch introduces a new helper function that returns a
breakpoint_ops instance appropriate for a parsed location and updates
the Guile and Python bindings to use said function, rather than the
current hard-coded use of bkpt_breakpoint_ops. Since this logic is
duplicated in the handling of the `break' and `trace' commands, those
are also updated to call into the new helper function.
gdb/ChangeLog:
2019-12-10 George Barrett <bob@bob131.so>
Fix scripted probe breakpoints.
* breakpoint.c (tracepoint_probe_breakpoint_ops): Move
declaration forward.
(breakpoint_ops_for_event_location_type)
(breakpoint_ops_for_event_location): Add function definitions.
(break_command_1, trace_command): Use
breakpoint_ops_for_event_location.
* breakpoint.h (breakpoint_ops_for_event_location): Add function
declarations.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Use
breakpoint_ops_for_event_location.
* python/py-breakpoint.c (bppy_init): Use
breakpoint_ops_for_event_location.
gdb/testsuite/ChangeLog:
2019-12-10 George Barrett <bob@bob131.so>
gdb: rank an lvalue argument incompatible for an rvalue parameter
Passing an lvalue argument to a function that takes an rvalue parameter
is not allowed per C++ rules. Consider this function:
int g (int &&x) { return x; }
Calling g as in
int i = 5;
int j = g (i);
is illegal. For instance, GCC 9.2.1 yields
~~~
test.cpp: In function ‘int main()’:
test.cpp:6:14: error: cannot bind rvalue reference of type ‘int&&’ to
lvalue of type ‘int’
6 | int j = g (i);
| ^
~~~
GDB currently allows this function call:
~~~
(gdb) print g(i)
$1 = 5
~~~
Fix this by ranking an lvalue argument incompatible with an rvalue
parameter. The behavior after this patch is:
~~~
(gdb) print g(i)
Cannot resolve function g to any overloaded instance
~~~
Tested with GCC 9.2.1.
gdb/ChangeLog:
2019-12-09 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdbtypes.c (rank_one_type): Return INCOMPATIBLE_TYPE_BADNESS
when ranking an lvalue argument for an rvalue parameter.
gdb/testsuite/ChangeLog:
2019-12-09 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.cp/rvalue-ref-overload.cc (g): New function that takes
an rvalue parameter.
* gdb.cp/rvalue-ref-overload.exp: Test calling it with an lvalue
parameter.
Andrew Burgess [Tue, 3 Dec 2019 19:15:06 +0000 (19:15 +0000)]
gdb/testsuite: kfail some tests if using broken gcc
In some cases the Fortran stride information generated by GCC is wrong
with versions of GCC after 7.x.x. This commit adds kfails for the
tests in question with known bad versions of gcc.
Andrew Burgess [Tue, 3 Dec 2019 13:18:43 +0000 (13:18 +0000)]
gdb/testsuite/fortran: Fix info-modules/info-types for gfortran 8+
The gdb.fortran/info-modules.exp and gdb.fortran/info-types.exp tests
are failing on versions of gfortran after 7.3 due to the inclusion of
extra "system" modules and type that were not being matched by the
current test patterns.
Rather than building increasingly complex patterns that would always
be at risk of breaking with future versions of GCC I have instead
added a new library that parses the output of the following commands:
info types
info variables
info functions
info modules
info module functions
info module variables
into a data structure, the test can than run checks against the
contents of this data structure.
The benefit is that we can simply ignore extra results that we don't
care about.
There is a small risk that a bug in GDB might allow us to start
reporting incorrect results in such a way that the new library will
not spot the error. However, I have tried to mitigate this risk by
adding extra procedures into the test library (see check_no_entry) and
we can add more in future if we wanted to be even more defensive.
I tested this test file with gFortran 7.3.1, 8.3.0, and 9.2.0, I now
see 100% pass in all cases.
gdb/testsuite/ChangeLog:
* gdb.fortran/info-modules.exp: Rewrite to make use of new
sym-info-cmds library.
* gdb.fortran/info-types.exp: Likewise.
* lib/sym-info-cmds.exp: New file.
Wataru Ashihara [Sun, 8 Dec 2019 08:00:43 +0000 (17:00 +0900)]
gdb/darwin-nat.c: Fix template argument for scoped_restore_tmpl
This should be the type of startup_with_shell, whose type was changed
from int to bool at commit 80fd28264.
This fixes the build on macOS:
CXX darwin-nat.o
In file included from ../../gdb/darwin-nat.c:22:
In file included from ../../gdb/top.h:25:
In file included from ../../gdb/value.h:23:
In file included from ../../gdb/frame.h:72:
In file included from ../../gdb/language.h:26:
In file included from ../../gdb/symtab.h:33:
../../gdb/gdbsupport/gdb_optional.h:155:19: error: no matching constructor for initialization of 'scoped_restore_tmpl<int>'
new (&m_item) T (std::forward<Args>(args)...);
^ ~~~~~~~~~~~~~~~~~~~~~~~~
../../gdb/darwin-nat.c:1995:31: note: in instantiation of function template specialization 'gdb::optional<scoped_restore_tmpl<int> >::emplace<bool *, int>' requested here
restore_startup_with_shell.emplace (&startup_with_shell, 0);
^
../../gdb/gdbsupport/scoped_restore.h:69:3: note: candidate constructor template not viable: no known conversion from 'bool *' to 'int *' for 1st argument
scoped_restore_tmpl (T *var, T2 value)
^
../../gdb/gdbsupport/scoped_restore.h:57:3: note: candidate constructor not viable: requires single argument 'var', but 2 arguments were provided
scoped_restore_tmpl (T *var)
^
../../gdb/gdbsupport/scoped_restore.h:76:3: note: candidate constructor not viable: requires single argument 'other', but 2 arguments were provided
scoped_restore_tmpl (const scoped_restore_tmpl<T> &other)
^
1 error generated.
Jan Beulich [Mon, 9 Dec 2019 12:31:07 +0000 (13:31 +0100)]
x86/Intel: fix "near ptr" / "far ptr" handling
Commit dc2be329b950 ("i386: Only check suffix in instruction mnemonic")
broke rejecting of these for floating point insns. Fix this by setting
the "byte" operand attribute, which will now (again) cause an error.
Furthermore the diagnostic for the "far ptr" case in general and for the
"near ptr" case in the non-float cases became "invalid instruction
suffix" instead of the intended "operand size mismatch". Fix this by
also setting the "tbyte" operand attribute (no insn template accepts
both byte and tbyte operands).
Jan Beulich [Mon, 9 Dec 2019 12:29:44 +0000 (13:29 +0100)]
x86/Intel: drop pointless suffix setting for "tbyte ptr"
There are extremely few insns accepting "tbyte ptr" operand, so the
"tbyte" operand flag checking done by match_operand_size() is already
sufficient; the setting of the suffix has become meaningless anyway
with dc2be329b950 ("i386: Only check suffix in instruction mnemonic").
Fold the code with that setting the "byte" operand flag to force an
error (no insn at all accepts both "byte ptr" and tbyte ptr" operands,
except for AnySize ones where the two (conflicting) recorded types
don't matter (operand_size_match() doesn't call match_operand_size() in
this case).
Jan Beulich [Mon, 9 Dec 2019 12:29:14 +0000 (13:29 +0100)]
x86/Intel: drop pointless suffix setting for "fword ptr"
No floating point insn accepts an "fword ptr" operand, so the "fword"
operand flag checking done by match_mem_size() is already sufficient;
the setting of the suffix has become meaningless anyway with dc2be329b950 ("i386: Only check suffix in instruction mnemonic").
Jan Beulich [Mon, 9 Dec 2019 12:28:43 +0000 (13:28 +0100)]
x86/Intel: drop pointless special casing of LxS
LDS et al don't accept "word ptr" operands anyway, as per their insn
templates. Hence there's no need to special case this here; the check
has become dysfunctional anyway by dc2be329b950 ("i386: Only check
suffix in instruction mnemonic").
Alan Modra [Sat, 7 Dec 2019 12:01:43 +0000 (22:31 +1030)]
aarch64*-*-*ilp32 gas tests
The new pac_negate_ra_state test adds yet another failure on aarch64
ipl32 targets. This patch fixes that particular problem and a few
more that are trivial to fix.
Alan Modra [Sat, 7 Dec 2019 12:02:52 +0000 (22:32 +1030)]
Optional matching for run_dump_test
This adds an alternative to using #... in dump files, useful where we
only want to allow specific extra output. DW_CFA_nop in CIEs and FDEs
to pad out to required alignment (larger for 64-bit than 32-bit) is
an example where these optional match patterns are useful.
binutils/
* testsuite/lib/binutils-common.exp (regexp_diff): Support #?REGEXP.
ld/
* testsuite/ld-elf/eh4.d: Match optional padding DW_CFA_nop in FDEs.
* testsuite/ld-elf/eh5.d: Likewise, and extra CIEs emitted on
embedded targets.
Tom de Vries [Sun, 8 Dec 2019 10:25:28 +0000 (11:25 +0100)]
Fix inter-CU references using intra-CU form in imported-unit
When running the gdb testsuite with the cc-with-dwz board, I run into:
...
Running gdb/testsuite/gdb.dwarf2/imported-unit.exp ...
gdb compile failed, dwz: gdb.dwarf2/imported-unit/imported-unit: \
Couldn't find DIE referenced by DW_AT_abstract_origin
cc-with-tweaks.sh: dwz did not modify gdb.dwarf2/imported-unit/imported-unit.
...
The problem is that the DW_AT_abstract_origin reference here:
...
<0><d2>: Abbrev Number: 2 (DW_TAG_compile_unit)
<1><e6>: Abbrev Number: 4 (DW_TAG_subprogram)
<e7> DW_AT_abstract_origin: <0x142>
<eb> DW_AT_low_pc : 0x4004b2
<f3> DW_AT_high_pc : 0x4004c8
...
referring to a DIE in another compilation unit here:
...
<0><129>: Abbrev Number: 2 (DW_TAG_compile_unit)
<1><142>: Abbrev Number: 4 (DW_TAG_subprogram)
<143> DW_AT_name : main
<148> DW_AT_type : <0x13b>
<14c> DW_AT_external : 1
...
is encoded using intra-CU reference form DW_FORM_ref4 instead of intra-CU
reference DW_FORM_ref_addr:
...
4 DW_TAG_subprogram [has children]
DW_AT_abstract_origin DW_FORM_ref4
DW_AT_low_pc DW_FORM_addr
DW_AT_high_pc DW_FORM_addr
DW_AT value: 0 DW_FORM value: 0
...
Fix this in the DWARF assembler by making all inter-CU references use the '%'
label prefix.
Keith Seitz [Sat, 7 Dec 2019 17:35:03 +0000 (09:35 -0800)]
Core file build-id support
This patch uses new BFD support for detecting build-ids in core
files.
After this patch, it is possible to run gdb with only the
core file, and gdb will automatically load the executable and
debug info [example from tests]:
$ gdb -nx -q
(gdb) core-file corefile-buildid.core
[New LWP 29471]
Reading symbols from gdb.base/corefile-buildid/debugdir-exec/.build-id/36/fe5722c5a7ca3ac746a84e223c6a2a69193a24...
Core was generated by `outputs/gdb.base/coref'.
Program terminated with signal SIGABRT, Aborted.
(gdb)
This work is based on functionality available in Fedora originally
written by Jan Kratochvil.
Regression tested on buildbot.
gdb/ChangeLog:
2019-12-07 Keith Seitz <keiths@redhat.com>
* build-id.c (build_id_bfd_get): Permit bfd_core, too.
(build_id_to_debug_bfd): Make static, rewriting to use
build_id_to_bfd_suffix.
(build_id_to_bfd_suffix): Copy of build_id_to_debug_bfd,
adding `suffix' parameter. Append SUFFIX to file names
when searching for matching files.
(build_id_to_debug_bfd): Use build_id_to_bfd_suffix.
(build_id_to_exec_bfd): Likewise.
* build-id.h (build_id_to_debug_bfd): Clarify that function
searches for BFD of debug info file.
(build_id_to_exec_bfd): Declare.
* corelow.c: Include build-id.h.
(locate_exec_from_corefile_build_id): New function.
(core_target_open): If no executable BFD is found,
search for a core file BFD using build-id.
gdb/testsuite/ChangeLog:
2019-12-07 Keith Seitz <keiths@redhat.com>
* gdb.base/corefile-buildid-shlib-shr.c: New file.
* gdb.base/corefile-buildid-shlib.c: New file.
* gdb.base/corefile-buildid.c: New file.
* gdb.base/corefile-buildid.exp: New file.
Alan Modra [Fri, 6 Dec 2019 00:51:45 +0000 (11:21 +1030)]
PR25236, common sym versioning
In cases where a relocatable object file has a common symbol, no other
file has a definition, and there is a matching common symbol found in
a shared library then ld will output a definition using the largest of
size and alignment for the commons. This patch fixes a bug in ld that
ignored common symbols when assigning versions, resulting in such
symbols being given VER_NDX_LOCAL versions.
PR 25236
* elflink.c (_bfd_elf_link_assign_sym_version): Assign versions
for ELF_COMMON_DEF_P symbols.
(elf_link_output_extsym, _bfd_elf_add_default_symbol): Adjust to
suit.
Luis Machado [Tue, 26 Nov 2019 15:52:56 +0000 (12:52 -0300)]
[ARM, sim] Fix build error and warnings
Newer GCC's have switched to -fno-common by default, and this breaks the build
for the ARM sim, like this:
binutils-gdb.git~gdb-8.3-release/sim/arm/maverick.c:65: multiple definition of `DSPsc'; libsim.a(wrapper.o):binutils-gdb.git~gdb-8.3-release/sim/arm/wrapper.c:134: first defined here
binutils-gdb.git~gdb-8.3-release/sim/arm/maverick.c:64: multiple definition of `DSPacc'; libsim.a(wrapper.o):binutils-gdb.git~gdb-8.3-release/sim/arm/wrapper.c:133: first defined here
binutils-gdb.git~gdb-8.3-release/sim/arm/maverick.c:63: multiple definition of `DSPregs'; libsim.a(wrapper.o):binutils-gdb.git~gdb-8.3-release/sim/arm/wrapper.c:132: first defined here
I also noticed a few warnings due to mismatching types, as follows:
../../../../repos/binutils-gdb/sim/arm/wrapper.c: In function ‘sim_create_inferior’:
../../../../repos/binutils-gdb/sim/arm/wrapper.c:335:16: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
for (arg = argv; *arg != NULL; arg++)
^
../../../../repos/binutils-gdb/sim/arm/wrapper.c:342:8: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
arg = argv;
^
../../../../repos/binutils-gdb/sim/arm/wrapper.c:345:13: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
for (arg = argv; *arg != NULL; arg++)
^
The following patch fixes both of the above.
sim/arm/ChangeLog:
2019-12-06 Luis Machado <luis.machado@linaro.org>
* armemu.c (isize): Move this declaration ...
* arminit.c (isize): ... here.
* maverick.h: New file.
* wrapper.c: Include "maverick.h".
(<struct maverick_regs>, <union maverick_acc_regs>): Remove and update
comment.
(sim_create_inferior): Cast variables to proper type.
* maverick.c: Include "maverick.h".
(<struct maverick_regs>, <union maverick_acc_regs>): Move
declarations to maverick.h and update comment.
(DSPsc, DSPacc, DSPregs): Adjust comment.
The DWARF will result in two entries in the symbol table, a decl with type
char *[] and a def with type char*[2].
When trying to print the value of zzz:
...
$ gdb a.spec.out -batch -ex "p zzz"
...
the decl (rather than the def) will be found in the symbol table, which is
missing the location information, and consequently we get:
...
$1 = 0x601030 <zzz>
...
[ There is a fallback mechanism that finds the address of the variable in the
minimal symbol table, but that's not used here, because the type of the decl
does not specify a size. We could use the symbol size here to get the size
of the type, but that's currently not done: PR exp/24989. Still, fixing that
PR would not fix the generic case, where minimal symbol info is not
available. ]
Fix this by preferring defs over decls when searching in the symbol table.
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2019-12-06 Tom de Vries <tdevries@suse.de>
PR symtab/24971
* block.c (best_symbol, better_symbol): New function.
(block_lookup_symbol_primary, block_lookup_symbol): Prefer def over
decl.
gdb/testsuite/ChangeLog:
2019-12-06 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/varval.exp: Add decl before def test.
Kyrylo Tkachov [Fri, 6 Dec 2019 10:46:32 +0000 (10:46 +0000)]
[gas] Implement .cfi_negate_ra_state directive
This patch implements the .cfi_negate_ra_state to be consistent with
LLVM (https://reviews.llvm.org/D50136). The relevant DWARF code DW_CFA_AARCH64_negate_ra_state
is multiplexed on top of DW_CFA_GNU_window_save, as per
https://gcc.gnu.org/ml/gcc-patches/2017-08/msg00753.html
I believe this is the simplest patch implementing this and is needed to
allow users to build, for example, the Linux kernel with Armv8.3-A
pointer authentication support with Clang while using gas as the
assembler, which is a common usecase.
gdb: fix overload resolution for see-through references
The overload resolution mechanism assigns badness values to the
necessary conversions to be made on types to pick a champion. A
badness value consists of a "rank" that scores the conversion and a
"subrank" to differentiate conversions of the same kind.
An auxiliary function, 'sum_ranks', is used for adding two badness
values. In all of its uses, except two, 'sum_ranks' is used for
populating the subrank of a badness value. The two exceptions are in
'rank_one_type':
~~~
/* See through references, since we can almost make non-references
references. */
Here, the result of a recursive call is combined with
REFERENCE_CONVERSION_BADNESS. This leads to the problem of
over-punishment by combining two ranks. Consider this:
When ranking 'an_overloaded_function (const foo &)', the badness
values REFERENCE_CONVERSION_BADNESS and CV_CONVERSION_BADNESS are
combined, whereas 'rank_one_type' assigns only the
REFERENCE_CONVERSION_BADNESS value to 'an_overloaded_function (const
foo &&)' (there is a different execution flow for that). This yields
in GDB picking the latter function as the overload champion instead of
the former.
In fact, the 'rank_one_type' function should have given
'an_overloaded_function (const foo &)' the CV_CONVERSION_BADNESS
value, with the see-through referencing increasing the subrank a
little bit. This can be achieved by introducing a new badness value,
REFERENCE_SEE_THROUGH_BADNESS, which bumps up the subrank only, and
using it in the two "exceptional" cases of 'sum_ranks'.
gdb/ChangeLog:
2019-12-06 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdbtypes.h: Define the REFERENCE_SEE_THROUGH_BADNESS value.
* gdbtypes.c (rank_one_type): Use REFERENCE_SEE_THROUGH_BADNESS
for ranking see-through reference cases.
gdb/testsuite/ChangeLog:
2019-12-06 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com>
* gdb.cp/rvalue-ref-overload.cc: Add a case that involves both
CV and reference conversion for overload resolution.
* gdb.cp/rvalue-ref-overload.exp: Test it.
projects / thirdparty / binutils-gdb.git / log
