Driver Changes:
- HDCP fixes and updates for Xe3lpd and for HDCP 1.4 (Suraj)
- Add dedicated lock for each sideband (Jani)
- New GSC FW for ARL-H and ARL-U (Daniele)
- Add support for 3 VDSC engines 12 slices (Ankit)
- Sanitize MBUS joining (Ville)
- Fixes in DP MST (Imre)
- Stop using pixel_format_from_register_bits() to parse VBT (Ville)
- Declutter CDCLK code (Ville)
- PSR clean up and fixes (Jouni, Jani, Animesh)
- DMC wakelock - Fixes and enablement for Xe3_LPD (Gustavo)
- Demote source OUI read/write failure logging to debug (Jani)
- Potential boot oops fix and some general cleanups (Ville)
- Scaler code cleanups (Ville)
- More conversion towards struct intel_display and general cleanups (Jani)
- Limit max compressed bpp to 18 when forcing DSC (Ankit)
- Start to reconcile i915's and xe's display power mgt sequences (Rodrigo)
- Some correction in the DP Link Training sequence (Arun)
- Avoid setting YUV420_MODE in PIPE_MISC on Xe3lpd (Ankit)
- MST and DDI cleanups and refactoring (Jani)
- Fixed an typo in i915_gem_gtt.c (Zhang)
- Try to make DPT shrinkable again (Ville)
- Try to fix CPU MMIO fails during legacy LUT updates (Ville)
- Some PPS cleanups (Ville, Jani)
- Use seq buf for printing rates (Jani)
- Flush DMC wakelock release work at the end of runtime suspend (Gustavo)
- Fix NULL pointer dereference in capture_engine (Eugene)
- Fix memory leak by correcting cache object name in error handler (Jiasheng)
- Small refactor in WM/DPKGC for modifying latency programmed into PKG_C_LATENCY (Suraj)
- Add drm_printer based hex dumper and use it (Jani)
- Move g4x code to specific g4x functions (Jani)
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
[sima: conflict in intel_dp_mst.c due to conversion to
drm_connector_dynamic_init that landed through drm-misc] Link: https://patchwork.freedesktop.org/patch/msgid/Z1n4VhatZpvT5xKs@intel.com
Fei Shao [Wed, 4 Dec 2024 14:25:38 +0000 (22:25 +0800)]
drm/mediatek: dp: Support flexible length of DP calibration data
The DP calibration data is stored in nvmem cells, and the data layout is
described in the `mtk_dp_efuse_fmt` arrays for each platform.
There is no guarantee that the data is always a 4-length u32 cell array.
For example, MT8188 has a data length of 3, preventing it from passing
the preliminary check and undergoing calibration.
Update the logic to support flexible data lengths. Specifically, we
validate the length returned from `nvmem_cell_read()` against the
platform-specific efuse format. If out-of-bound access is detected, fall
back to the default calibration values. This likely indicates an error
in either the efuse data length described in DT or the efuse format
within the driver.
Liankun Yang [Thu, 28 Nov 2024 02:37:21 +0000 (10:37 +0800)]
drm/mediatek: dp: Add sdp path reset
When using type-c to type-c to connect to the monitor,
the sound plays normally. If you unplug the type-c and
connect the type-c to hdmi dongle to the monitor, there will be noise.
By capturing the audio data, it is found that
the data position is messy, and there is no error in the data.
Through experiments, it can be restored by resetting the SDP path
when unplugging it.
Add a optional properties to change LVDS output voltage. This should not
be static as this depends mainly on the connected display voltage
requirement. We have three properties:
- "ti,lvds-termination-ohms", which sets near end termination,
- "ti,lvds-vod-swing-data-microvolt" and
- "ti,lvds-vod-swing-clock-microvolt" which both set LVDS differential
output voltage for data and clock lanes. They are defined as an array
with min and max values. The appropriate bitfield will be set if
selected constraints can be met.
If "ti,lvds-termination-ohms" is not defined the default of 200 Ohm near
end termination will be used. Selecting only one:
"ti,lvds-vod-swing-data-microvolt" or
"ti,lvds-vod-swing-clock-microvolt" can be done, but the output voltage
constraint for only data/clock lanes will be met. Setting both is
recommended.
Andrej Picej [Mon, 16 Dec 2024 08:54:08 +0000 (09:54 +0100)]
dt-bindings: drm/bridge: ti-sn65dsi83: Add properties for ti,lvds-vod-swing
Add properties which can be used to specify LVDS differential output
voltage. Since this also depends on near-end signal termination also
include property which sets this. LVDS differential output voltage is
specified with an array (min, max), which should match the one from
connected device.
Tomi Valkeinen [Wed, 23 Oct 2024 11:52:43 +0000 (14:52 +0300)]
drm: xlnx: zynqmp_dpsub: Add DP audio support
Add basic DisplayPort audio support.
Support non-live audio playback from two PCMs (DMA channels), and the
volume control in the audio mixer.
As older dtb files may not have the audio DMA channels defined, the
driver will just mark the audio support as disabled if the audio DMA is
missing, and will continue with only display support.
Note: Reset doesn't seem to work (ZYNQMP_DISP_AUD_SOFT_RESET). If we do
a reset, audio playback won't start again even if, afaics, we do set up
all the necessary registers. So, at the moment, resetting the audio
block in dp_dai_hw_free() is commented out.
The DP subsystem for ZynqMP supports audio via two channels, and the DP
DMA has dma-engines for those channels. For some reason the DT binding
has not specified those channels, even if the picture included in
xlnx,zynqmp-dpsub.yaml shows "2 x aud" DMAs.
This hasn't caused any issues as the drivers have not supported audio,
and has thus gone unnoticed.
To make it possible to add the audio support to the driver, add the two
audio DMAs to the binding. While strictly speaking this is an ABI break,
there should be no regressions caused by this as we're adding new
entries at the end of the dmas list, and, after the audio support has
been added in "arm64: dts: zynqmp: Add DMA for DP audio", the driver
will treat the audio DMAs as optional to also support the old bindings.
Dave Airlie [Wed, 18 Dec 2024 21:59:20 +0000 (07:59 +1000)]
Merge tag 'drm-intel-gt-next-2024-12-18' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes:
- More accurate engine busyness metrics with GuC submission (Umesh)
- Ensure partial BO segment offset never exceeds allowed max (Krzysztof)
- Flush GuC CT receive tasklet during reset preparation (Zhanjun)
Michel Dänzer [Tue, 17 Dec 2024 17:22:56 +0000 (18:22 +0100)]
drm/amdgpu: Handle NULL bo->tbo.resource (again) in amdgpu_vm_bo_update
Third time's the charm, I hope?
Fixes: d3116756a710 ("drm/ttm: rename bo->mem and make it a pointer") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3837 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replacing kmalloc() + memcpy() with kmemdump() doesn't change semantics.
Original code works without fault, so this is not a bug fix but proposed improvement.
Link: https://lwn.net/Articles/198928/ Fixes: 84a2947ecc85 ("drm/amdgpu: Implement virt req_ras_err_count") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Xinhui Pan <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Zhigang Luo <Zhigang.Luo@amd.com> Cc: Victor Skvortsov <victor.skvortsov@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Lijo Lazar <lijo.lazar@amd.com> Cc: Yunxiang Li <Yunxiang.Li@amd.com> Cc: Jack Xiao <Jack.Xiao@amd.com> Cc: Vignesh Chander <Vignesh.Chander@amd.com> Cc: Danijel Slivka <danijel.slivka@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix NULL pointer dereference in dmub_tracebuffer_show
It corrects the issue by checking if 'adev->dm.dmub_srv' is NULL before
accessing its 'meta_info' member. This ensures that we do not
dereference a NULL pointer.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:917 dmub_tracebuffer_show()
warn: address of 'adev->dm.dmub_srv->meta_info' is non-NULL
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c
901 static int dmub_tracebuffer_show(struct seq_file *m, void *data)
902 {
903 struct amdgpu_device *adev = m->private;
904 struct dmub_srv_fb_info *fb_info = adev->dm.dmub_fb_info;
905 struct dmub_fw_meta_info *fw_meta_info = &adev->dm.dmub_srv->meta_info;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Even if adev->dm.dmub_srv is NULL, the address of ->meta_info can't be NULL
v2: Initialize struct dmub_fw_meta_info *fw_meta_info to NULL (Dan Carpenter)
Fixes: 5a498172c8d0 ("drm/amd/display: Make DMCUB tracebuffer debugfs chronological") Cc: Leo Li <sunpeng.li@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Tue, 3 Dec 2024 15:00:25 +0000 (10:00 -0500)]
drm/amdgpu: Show warning message if IH ring overflow
If IH primary ring and KFD ih fifo overflows, we may miss CP, SDMA
interrupts and cause application soft hang. Show warning message with
ring name if overflow happens.
Add function to get ih ring name to avoid duplicating it. To keep
warning message consistent between GPU generations, change all
*_ih.c except ASICs older than Vega which has only one ih ring.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Wed, 4 Dec 2024 22:49:08 +0000 (17:49 -0500)]
drm/amdkfd: Improve signal event slow path
If event slot is not signaled, kfd_signal_event_interrupt goes to slow
path to scan all event slots to find the signaled event, this is needed
for old ASICs that don't have the event ID or the event IDs are
incorrect in the IH payload.
There is case that GPU signal the same event twice, then driver process
the first event interrupt, set_event and event slot is auto-reset, then
for the second event interrupt, KFD goes to slow path as event is not
signaled, just drop the second event interrupt because the application
only need wakeup once.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Tue, 26 Nov 2024 16:33:15 +0000 (11:33 -0500)]
drm/amdkfd: Queue interrupt work to different CPU
For CPX mode, each KFD node has interrupt worker to process ih_fifo to
send events to user space. Currently all interrupt workers of same adev
queue to same CPU, all workers execution are actually serialized and
this cause KFD ih_fifo overflow when CPU usage is high.
Use per-GPU unbounded highpri queue with number of workers equals to
number of partitions, let queue_work select the next CPU round robin
among the local CPUs of same NUMA.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After GPU page fault, there are lots of page fault interrupts generated
at short period even with CAM filter enabled because the fault address
is different. Each page fault copy to KFD ih fifo to send event to user
space by KFD interrupt worker, this could cause KFD ih fifo overflow
while other processes generate events at same time.
KFD process is aborted after GPU page fault, we only need one GPU page
fault interrupt sent to KFD ih fifo to send memory exception event to
user space.
Incease KFD ih fifo size to 2 times of IH primary ring size, to handle
the burst events case.
This patch handle the gfx v9 path, cover retry on/off and CAM filter
on/off cases.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Fri, 22 Nov 2024 22:36:15 +0000 (17:36 -0500)]
drm/amdkfd: KFD interrupt access ih_fifo data in-place
To handle 40000 to 80000 interrupts per second running CPX mode with 4
streams/queues per KFD node, KFD interrupt handler becomes the
performance bottleneck.
Remove the kfifo_out memcpy overhead by accessing ih_fifo data in-place
and updating rptr with kfifo_skip_count.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduced a new state variable into adev without even
remotely worrying about CPU barriers.
Since we already have the amdgpu_in_reset() function exactly for this
use case partially revert that.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 12 Dec 2024 15:43:45 +0000 (16:43 +0100)]
drm/amdgpu: set the VM pointer to NULL in amdgpu_job_prepare
As soon as the prepare phase is completed the VM might be released,
better set it to NULL.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 12 Dec 2024 15:29:18 +0000 (16:29 +0100)]
drm/amdgpu: fix amdgpu_coredump
The VM pointer might already be outdated when that function is called.
Use the PASID instead to gather the information instead.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sdma context empty interrupt is dropped in amdgpu_irq_dispatch
as unregistered interrupt src_id 243, this interrupt accounts to 1/3 of
total interrupts and causes IH primary ring overflow when running
stressful benchmark application. Disable this interrupt has no side
effect found.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Karol Przybylski [Sun, 15 Dec 2024 12:28:57 +0000 (13:28 +0100)]
drm/amdgpu: Fix potential integer overflow in scheduler mask calculations
The use of 1 << i in scheduler mask calculations can result in an
unintentional integer overflow due to the expression being
evaluated as a 32-bit signed integer.
This patch replaces 1 << i with 1ULL << i to ensure the operation
is performed as a 64-bit unsigned integer, preventing overflow
George Shen [Thu, 5 Dec 2024 21:58:21 +0000 (16:58 -0500)]
drm/amd/display: Disable MPC rate control on ODM pipe update
[Why]
Seamless boot skips MPC init for the active pipe, resulting in stale MPC
rate control state being retained. This will cause issues since other
logic assumes it is disabled (as DCN30 and newer does not need it).
[How]
Disable MPC rate control on ODM pipe update to cover the seamless boot
case.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A long time ago, we had an issue with the Raven system when it was
connected to two displays: one with DP and another with HDMI. After the
system woke up from suspension, we saw a solid green screen caused by an
underflow generated by bad DCC metadata. To workaround this issue, the
'commit 87b7ebc2e16c ("drm/amd/display: Fix green screen issue after
suspend")' was introduced to disable the DCC for a few frames after in
the resume phase. However, in hindsight, this solution was probably a
workaround at the kernel level for some issues from another part
(probably other driver components or user space). After applying this
patch and trying to reproduce the green issue in a similar hardware
system but using the latest kernel and userspace, we cannot see the
issue, which makes this workaround obsolete and creates extra
unnecessary complexity to the code; for all of this reason, this commit
reverts the original change.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Apply (some) policy for DML2 formulation on DCN35/DCN351
[Why]
Dropping the entirety of dml2_policy_build_synthetic_soc_states exposes
an issue for states that cannot be filled via bbox_overrides and rely on
the default parameters that may or may not be present depending on the
DM.
For amdgpu_dm this results in missing parameters for most of the struct
in higher states:
Shunlu Zhang [Thu, 14 Nov 2024 00:21:40 +0000 (19:21 -0500)]
drm/amd/display: delete legacy code
Delete unused code.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Shunlu Zhang <Shunlu.Zhang@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fangzhi Zuo [Mon, 2 Dec 2024 18:30:37 +0000 (13:30 -0500)]
drm/amd/display: Fix Mode Cutoff in DSC Passthrough to DP2.1 Monitor
Source --> DP2.1 MST hub --> DP1.4/2.1 monitor
When change from DP1.4 to DP2.1 from monitor manual, modes higher than
4k120 are all cutoff by mode validation. Switch back to DP1.4 gets all
the modes up to 4k240 available to be enabled by dsc passthrough.
[why]
Compared to DP1.4 link from hub to monitor, DP2.1 link has larger
full_pbn value that causes overflow in the process of doing conversion
from pbn to kbps.
[how]
Change the data type accordingly to fit into the data limit during
conversion calculation.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Tue, 3 Dec 2024 20:55:34 +0000 (15:55 -0500)]
drm/amd/display: init dc_power_state
Initialize the power state for dc use
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dillon Varone [Fri, 29 Nov 2024 21:37:32 +0000 (16:37 -0500)]
drm/amd/display: Add support for FAMS2+ interface versions
Current driver interface does not allow for flexibility in coexistence
of multiple interface versions, so add support for checking minor
interface revisions and providing appropriate programming.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 29 Nov 2024 16:53:38 +0000 (11:53 -0500)]
drm/amd/display: Update FAMS2 config cmd
The FAMS2 stream and sub-state have been separated into
2 different commands. Update the cmd function to send
one command each for the stream and sub-state.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrew Martin [Tue, 10 Dec 2024 16:45:53 +0000 (11:45 -0500)]
drm/amdgpu: Failed to check various return code
Clean up code to quiet the compiler on us failing to check the return
code.
Signed-off-by: Andrew Martin <Andrew.Martin@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrew Martin [Tue, 10 Dec 2024 16:50:13 +0000 (11:50 -0500)]
drm/amdkfd: Failed to check various return code
This patch checks and warns if pdd is NULL.
Signed-off-by: Andrew Martin <Andrew.Martin@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Thu, 12 Dec 2024 04:16:30 +0000 (09:46 +0530)]
drm/amdgpu: Use dbg level for VBIOS check messages
Driver has different ways to fetch VBIOS. If one of the methods doesn't
find an authentic one, it will show misleading info messages eventhough
a subsequent method finds a valid VBIOS. Keep the message level at debug
and add device context.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: remove useless init from amdgpu_job_alloc
This init is useless because base.sched will be cleared to 0 in drm_sched_job_init
because of commit 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()").
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: drop the amdgpu_device argument from amdgpu_ib_free
It's unused.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()")
accessing job->base.sched can produce unexpected results as the initialisation
of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the
memset.
This commit fixes an issue when a CS would fail validation and would
be rejected after job->num_ibs is incremented. In this case,
amdgpu_ib_free(ring->adev, ...) will be called, which would crash the
machine because the ring value is bogus.
To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this
because the device is actually not used in this function.
The next commit will remove the ring argument completely.
Fixes: 2320c9e6a768 ("drm/sched: memset() 'job' in drm_sched_job_init()") Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jiapeng Chong [Thu, 12 Dec 2024 01:47:17 +0000 (09:47 +0800)]
drm/amd/display: use swap() in update_phy_id_mapping()
Use existing swap() function rather than duplicating its implementation.
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c:185:47-48: WARNING opportunity for swap().
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_crc.c:125:53-54: WARNING opportunity for swap().
drm/amdgpu: simplify return statement in amdgpu_ras_eeprom_init
Remove the logically dead code in the last return statement of
amdgpu_ras_eeprom_init. The condition res < 0 is redundant since
res is already checked for a negative value earlier. Replace
return res < 0 ? res : 0; with return 0 to improve clarity.
Alex Deucher [Thu, 31 Oct 2024 17:51:35 +0000 (13:51 -0400)]
drm/amd/display: add non-DC drm_panic support
Add support for the drm_panic module, which displays a pretty user
friendly message on the screen when a Linux kernel panic occurs.
Adapt Lu Yao's code to use common helpers derived from
Jocelyn's patch. This extends the non-DC code to enable
access to non-CPU accessible VRAM and adds support for
other DCE versions.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lu Yao <yaolu@kylinos.cn> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com>
Jocelyn Falempe [Thu, 31 Oct 2024 17:27:03 +0000 (13:27 -0400)]
drm/amd/display: add DC drm_panic support
Add support for the drm_panic module, which displays a pretty user
friendly message on the screen when a Linux kernel panic occurs.
It doesn't work yet on laptop panels, maybe due to PSR.
Adapted from Jocelyn's original patch to add DC drm_panic
support.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lu Yao <yaolu@kylinos.cn> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com>
If the kernel hasn't been compiled with PCIe hotplug support this
can lead to problems with dGPUs that use BOCO because they effectively
drop off the bus.
To prevent issues, disable BOCO support when compiled without PCIe hotplug.
Reported-by: Gabriel Marcano <gabemarcano@yahoo.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1707#note_2696862 Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20241211155601.3585256-1-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 12 Nov 2024 21:19:18 +0000 (16:19 -0500)]
drm/amd/display/dc: add helper for panic updates
Add a DC helper for panic updates.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lu Yao <yaolu@kylinos.cn> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com>
Alex Deucher [Thu, 31 Oct 2024 17:20:19 +0000 (13:20 -0400)]
drm/amd/display: add clear_tiling mi callbacks
This adds clear_tiling callbacks to the mi structure that
will be used for drm panic support to clear the tiling on
a display. Mem input (mi) is used on DCE based display
IPs.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lu Yao <yaolu@kylinos.cn> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com>
Alex Deucher [Thu, 31 Oct 2024 17:17:06 +0000 (13:17 -0400)]
drm/amd/display: add clear_tiling hubp callbacks
This adds clear_tiling callbacks to the hubp structure that
will be used for drm panic support to clear the tiling on
a display. hubp3 support from Jocelyn's original patch
and the rest from me.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lu Yao <yaolu@kylinos.cn> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com>
Alex Deucher [Wed, 30 Oct 2024 21:27:23 +0000 (17:27 -0400)]
drm/amdgpu: add generic display panic helper code
Pull this out of Jocelyn's patch and make it generic.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lu Yao <yaolu@kylinos.cn> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com>
Arnd Bergmann [Wed, 18 Dec 2024 08:58:57 +0000 (09:58 +0100)]
accel/amdxdna: include linux/slab.h
This driver fails to build in random configurations:
drivers/accel/amdxdna/aie2_solver.c: In function 'remove_partition_node':
drivers/accel/amdxdna/aie2_solver.c:121:9: error: implicit declaration of function 'kfree' [-Wimplicit-function-declaration]
121 | kfree(pt_node);
| ^~~~~
drivers/accel/amdxdna/aie2_solver.c: In function 'get_free_partition':
drivers/accel/amdxdna/aie2_solver.c:153:19: error: implicit declaration of function 'kzalloc' [-Wimplicit-function-declaration]
153 | pt_node = kzalloc(sizeof(*pt_node), GFP_KERNEL);
Luca Ceresoli [Tue, 17 Dec 2024 16:02:51 +0000 (17:02 +0100)]
drm/bridge: ti-sn65dsi83: use dev_err_probe when failing to get panel bridge
When devm_drm_of_get_bridge() fails, the probe fails silently. Use
dev_err_probe() instead to log an error or report the deferral reason,
whichever is applicable.
Jesus Narvaez [Fri, 13 Dec 2024 20:47:20 +0000 (12:47 -0800)]
drm/i915/guc: Update guc_err message to show outstanding g2h responses
Updating the guc_error message to show how many g2h responses
are still outstanding, in order to help with future debugging.
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241213204720.3918056-1-jesus.narvaez@intel.com
Defining a number of enum elements in uapi header is meaningless. It will
not be used as expected and can potentially lead to incompatible issue
between user space application and driver.
Derek Foreman [Mon, 2 Dec 2024 18:19:39 +0000 (12:19 -0600)]
drm/connector: Allow clearing HDMI infoframes
Our infoframe setting code currently lacks the ability to clear
infoframes. For some of the infoframes, we only need to replace them,
so if an error occurred when generating a new infoframe we would leave
a stale frame instead of clearing the frame.
However, the Dynamic Range and Mastering (DRM) infoframe should only
be present when displaying HDR content (ie: the HDR_OUTPUT_METADATA blob
is set). If we can't clear infoframes, the stale DRM infoframe will
remain and we can never set the display back to SDR mode.
With this change, we clear infoframes when they can not, or should not,
be generated. This fixes switching to an SDR mode from an HDR one.
Fixes: f378b77227bc ("drm/connector: hdmi: Add Infoframes generation") Signed-off-by: Derek Foreman <derek.foreman@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241202181939.724011-1-derek.foreman@collabora.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
Imre Deak [Wed, 11 Dec 2024 23:03:26 +0000 (01:03 +0200)]
drm/tests: Add tests for drm_connector_dynamic_init()/register()
Add kunit tests for
drm_connector_dynamic_init()/drm_connector_dynamic_register() added in
an earlier commit.
v2: Replace the reference to the patchset with "earlier commit". (Jani)
Suggested-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-10-imre.deak@intel.com
Imre Deak [Wed, 11 Dec 2024 23:03:25 +0000 (01:03 +0200)]
drm/connector: Warn if a connector is registered/added incorrectly
All the drivers should be converted now to use
drm_connector_dynamic_init() for MST connectors, hence
drm_connector_dynamic_register()->drm_connector_add() can WARN now if
this was not the case (for instance if a driver inited an MST connector
with one of the drm_connector_init*() functions incorrectly).
Imre Deak [Wed, 11 Dec 2024 23:03:24 +0000 (01:03 +0200)]
drm/nouveau/dp_mst: Expose a connector to kernel users after it's properly initialized
After a connector is added to the drm_mode_config::connector_list, it's
visible to any in-kernel users looking up connectors via the above list.
Make sure that the connector is properly initialized before such
look-ups, by initializing the connector with
drm_connector_dynamic_init() - which doesn't add the connector to the
list - and registering it with drm_connector_dynamic_register() - which
adds the connector to the list - after the initialization is complete.
v2: Fix s/drm_connector_dynamic_register()/drm_connector_dynamic_init()
typo in the commit log.
Cc: Karol Herbst <kherbst@redhat.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Danilo Krummrich <dakr@kernel.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-8-imre.deak@intel.com
Imre Deak [Wed, 11 Dec 2024 23:03:23 +0000 (01:03 +0200)]
drm/amd/dp_mst: Expose a connector to kernel users after it's properly initialized
After a connector is added to the drm_mode_config::connector_list, it's
visible to any in-kernel users looking up connectors via the above list.
Make sure that the connector is properly initialized before such
look-ups, by initializing the connector with
drm_connector_dynamic_init() - which doesn't add the connector to the
list - and registering it with drm_connector_dynamic_register() - which
adds the connector to the list - after the initialization is complete.
v2: Fix s/drm_connector_dynamic_register()/drm_connector_dynamic_init()
typo in the commit log.
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Wayne Lin <wayne.lin@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-7-imre.deak@intel.com
Imre Deak [Wed, 11 Dec 2024 23:03:22 +0000 (01:03 +0200)]
drm/i915/dp_mst: Expose a connector to kernel users after it's properly initialized
After a connector is added to the drm_mode_config::connector_list, it's
visible to any in-kernel users looking up connectors via the above list.
Make sure that the connector is properly initialized before such
look-ups, by initializing the connector with
drm_connector_dynamic_init() - which doesn't add the connector to the
list - and registering it with drm_connector_dynamic_register() - which
adds the connector to the list - after the initialization is complete.
v2:
- Rebase on the change which moves adding the connector to the
connector list only later when calling
drm_connector_dynamic_register().
v3:
- Rebase on drm-misc-next, due to a trivial conflict with
commit 5503f8112e52 ("drm/i915/mst: unify MST topology callback naming ..."),
which is only in drm-intel-next.
- Fix s/drm_connector_dynamic_register()/drm_connector_dynamic_init()
typo in the commit log.
Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1) Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-6-imre.deak@intel.com
Imre Deak [Wed, 11 Dec 2024 23:03:21 +0000 (01:03 +0200)]
drm/dp_mst: Register connectors via drm_connector_dynamic_register()
MST connectors should be initialized/registered by calling
drm_connector_dynamic_init()/drm_connector_dynamic_register(). The
commit adding these functions explains the issue with the current
drm_connector_init*()/drm_connector_register() interface for MST
connectors.
Based on the above adjust here the registration part and change the
initialization part in follow-up commits for each driver.
For now, drivers are allowed to keep using the drm_connector_init*()
functions, by drm_connector_dynamic_register() checking for this (see
drm_connector_add()). A commit later will change this to WARN in such
cases.
v2: Replaces references to a "patch" with "commit" in the commit log.
(Jani)
Cc: Lyude Paul <lyude@redhat.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Wayne Lin <wayne.lin@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Danilo Krummrich <dakr@kernel.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-5-imre.deak@intel.com
Imre Deak [Wed, 11 Dec 2024 23:03:20 +0000 (01:03 +0200)]
drm/connector: Add deprecation notes for drm_connector_register/unregister
Drivers should register/unregister only dynamic (MST) connectors
manually using drm_connector_dynamic_register()/unregister().
Static connectors are registered/unregistered by the DRM core
automatically. Some drivers still call drm_connector_register()/
unregister() for static connectors, both of which should be a nop
for them and hence are scheduled to be removed. Update the function
documentation for these functions accordingly.
v2: s/deprication/deprecation in subject line. (Jani)
Imre Deak [Wed, 11 Dec 2024 23:03:19 +0000 (01:03 +0200)]
drm/connector: Add FIXME for GETRESOURCES ioctl wrt. uninited connectors
The connectors enumerated by the GETRESOURCES ioctl may not be fully
initialized yet wrt. to the state set up during connector registration
(for instance the connector's debugfs/sysfs interfaces may not exist
yet). This can happen in two ways:
1. Connectors initialized and added to the
drm_mode_config::connector_list during driver loading will be visible
to the GETRESOURCES ioctl caller once the driver is registered via
drm_dev_register()->drm_minor_register(DRM_MINOR_PRIMARY) and before
the connectors are registered via drm_dev_register()->
drm_modeset_register_all().
2. Dynamic connectors (MST) - after being initialized - may be added to
the connector_list after the driver is loaded and registered and before
the connector's userspace interfaces (debugfs, sysfs etc.) are added
in drm_connector_dynamic_register().
A solution for 1. would be to register the driver only after the
connectors are registered, for 2. to add the connector to connector_list
only after the userspace interfaces are registered.
The fix requires a bigger change, for now adding a FIXME: comment for
it.
v2: Remove references to the patchset from the commit log. (Jani)
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-3-imre.deak@intel.com
Imre Deak [Wed, 11 Dec 2024 23:03:18 +0000 (01:03 +0200)]
drm/connector: Add a way to init/add a connector in separate steps
Atm when the connector is added to the drm_mode_config::connector_list,
the connector may not be fully initialized yet. This is not a problem
for static connectors initialized/added during driver loading, for which
the driver ensures that look-ups via the above list are not possible
until all the connector and other required state is fully initialized
already. It's also not a problem for user space looking up either a
static or dynamic (see what this is below) connector, since this will be
only possible once the connector is registered.
A dynamic - atm only a DP MST - connector can be initialized and added
after the load time initialization is done. Such a connector may be
looked up by in-kernel users once it's added to the connector list. In
particular a hotplug handler could perform a detection on all the
connectors on the list and hence find a connector there which isn't yet
initialized. For instance the connector's helper hooks may be unset,
leading to a NULL dereference while the detect helper calls the
connector's drm_connector_helper_funcs::detect() or detect_ctx()
handler.
To resolve the above issue, add a way for dynamic connectors to
separately initialize the DRM core specific parts of the connector
without adding it to the connector list - by calling the new
drm_connector_dynamic_init() - and to add the connector to the list
later once all the initialization is complete and the connector is
registered - by calling the new drm_connector_dynamic_register().
Adding the above 2 functions was also motivated to make the distinction
of the interface between static and dynamic connectors clearer: Drivers
should manually initialize and register only dynamic connectors (with
the above 2 functions). A driver should only initialize a static
connector (with one of the drm_connector_init*, drmm_connector_init*
functions) while the registration of the connector will be done
automatically by DRM core.
v2: (Jani)
- Let initing DDC as well via drm_connector_init_core().
- Rename __drm_connector_init to drm_connector_init_core_and_add().
v3:
- Rename drm_connector_init_core() to drm_connector_dynamic_init().
(Sima)
- Instead of exporting drm_connector_add(), move adding the connector
to the registration step via a new drm_connector_dynamic_register().
(Sima)
- Update drm_connector_dynamic_init()'s function documentation and the
commit log according to the above changes.
- Update the commit log describing the problematic scenario during
connector detection. (Maxime)
Cc: Jani Nikula <jani.nikula@intel.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: Maxime Ripard <mripard@kernel.org> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1) Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211230328.4012496-2-imre.deak@intel.com
Tomi Valkeinen [Tue, 17 Dec 2024 05:31:38 +0000 (07:31 +0200)]
dt-bindings: display: renesas,du: Add r8a779h0
Extend the Renesas DU display bindings to support the r8a779h0 V4M.
Note that we remove the requirement for two ports from the global part
of the bindings, as each conditional part defines the number of required
ports already. This came up with r8a779h0 as it's the first one that has
only one port.
The binding is missing maxItems for all renesas,cmms and renesas,vsps
properties. As the amount of cmms or vsps is always a fixed amount, set
the maxItems to match the minItems.
Also add the minItems and maxItems to the top level properties.
Tomi Valkeinen [Tue, 17 Dec 2024 05:31:36 +0000 (07:31 +0200)]
drm/rcar-du: Write DPTSR only if the second source exists
Currently the driver always writes DPTSR when setting up the hardware.
However, writing the register is only meaningful when the second source
for a plane is used, and the register is not even documented for SoCs
that do not have the second source.
So move the write behind a condition.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> # On R-Car M3-N Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-2-e77421093c05@ideasonboard.com
Tomi Valkeinen [Tue, 17 Dec 2024 05:31:35 +0000 (07:31 +0200)]
drm/rcar-du: dsi: Fix PHY lock bit check
The driver checks for bit 16 (using CLOCKSET1_LOCK define) in CLOCKSET1
register when waiting for the PPI clock. However, the right bit to check
is bit 17 (CLOCKSET1_LOCK_PHY define). Not only that, but there's
nothing in the documents for bit 16 for V3U nor V4H.
So, fix the check to use bit 17, and drop the define for bit 16.
Fixes: 155358310f01 ("drm: rcar-du: Add R-Car DSI driver") Fixes: 11696c5e8924 ("drm: Place Renesas drivers in a separate dir") Cc: stable@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-1-e77421093c05@ideasonboard.com
Boris Brezillon [Wed, 11 Dec 2024 08:05:00 +0000 (09:05 +0100)]
drm/panthor: Report innocent group kill
Groups can be killed during a reset even though they did nothing wrong.
That usually happens when the FW is put in a bad state by other groups,
resulting in group suspension failures when the reset happens.
If we end up in that situation, flag the group innocent and report
innocence through a new DRM_PANTHOR_GROUP_STATE flag.
Bump the minor driver version to reflect the uAPI change.
Changes in v4:
- Add an entry to the driver version changelog
- Add R-bs
Changes in v3:
- Actually report innocence to userspace
Lizhi Hou [Fri, 13 Dec 2024 23:29:32 +0000 (15:29 -0800)]
accel/amdxdna: Read firmware interface version from registers
The latest released firmware supports reading firmware interface version
from registers directly. The driver's probe routine reads the major and
minor version numbers. If the firmware interface is not compatible with
the driver, the driver's probe routine returns failure.
Co-developed-by: Min Ma <min.ma@amd.com> Signed-off-by: Min Ma <min.ma@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241213232933.1545388-5-lizhi.hou@amd.com
Lizhi Hou [Fri, 13 Dec 2024 23:29:31 +0000 (15:29 -0800)]
accel/amdxdna: Enhance power management settings
Add SET_STATE ioctl to configure device power mode for aie2 device.
Three modes are supported initially.
POWER_MODE_DEFAULT: Enable clock gating and set DPM (Dynamic Power
Management) level to value which has been set by resource solver or
maximum DPM level the device supports.
POWER_MODE_HIGH: Enable clock gating and set DPM level to maximum DPM
level the device supports.
POWER_MODE_TURBO: Disable clock gating and set DPM level to maximum DPM
level the device supports.
Disabling clock gating means all clocks always run on full speed. And
the different clock frequency are used based on DPM level been set.
Initially, the driver set the power mode to default mode.
Co-developed-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com> Signed-off-by: Narendra Gutta <VenkataNarendraKumar.Gutta@amd.com> Co-developed-by: George Yang <George.Yang@amd.com> Signed-off-by: George Yang <George.Yang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241213232933.1545388-4-lizhi.hou@amd.com
projects / thirdparty / kernel / linux.git / log
