Lauri Tirkkonen [Tue, 24 Oct 2017 17:40:50 +0000 (20:40 +0300)]
nspawn: EROFS for chowning mount points is not fatal (#7122)
This fixes --read-only with --private-users. mkdir_userns_p may return
-EROFS if either mkdir or lchown fails; lchown failing is fine as the
mount point will just be overmounted, and if mkdir fails then the
following mount() will also fail (with ENOENT).
After previous output from systemd-shutdown indicated a bug, my attention
was drawn to redundant output lines. Did they indicate an anomaly?
It turns out to be an expected, harmless result of the current code. But
we don't have much justification to run such redundant operations. Let's
remove the confusing redundant message.
We can stop trying to remount a directory read-only once its mount entry
has successfully been changed to "ro". We can simply let the kernel keep
track of this for us. I don't bother to try and avoid re-parsing the
mountinfo. I appreciate snappy shutdowns, but this code is already
intricate and buggy enough (see issue 7131).
(Disclaimer: At least for the moment, you can't _rely_ on always seeing
suspicious output from systemd-shutdown. By default, you can expect the
kernel to truncate the log output of systemd-shutdown. Ick ick ick!
Because /dev/kmsg is rate-limited by default. Normally it prints a message
"X lines supressed", but we tend to shut down before the timer expires
in this case).
I also tested with `systemctl reboot --force`, plus a loopback mount to
cause one of the umounts to fail initially. In this case another 2 lines
of output are removed (out of a larger number of lines).
core: in --user mode, report READY=1 as soon as basic.target is reached (#7102)
When a user logs in, systemd-pam will wait for the user manager instance to
report readiness. We don't need to wait for all the jobs to finish, it
is enough if the basic startup is done and the user manager is responsive.
systemd --user will now send out a READY=1 notification when either of two
conditions becomes true:
- basic.target/start job is gone,
- the initial transaction is done.
myrkr [Tue, 24 Oct 2017 07:56:40 +0000 (09:56 +0200)]
nspawn: Fix calculation of capabilities for configuration file (#7087)
The current code shifting an integer 1 failed for capabilities like
CAP_MAC_ADMIN (numerical value 33). This caused issues when specifying
them in the nspawn configuration file. Using an uint64_t 1 instead.
The similar code for processing the --capability command line option
was already correctly working.
Peter Hutterer [Mon, 23 Oct 2017 08:20:16 +0000 (18:20 +1000)]
hwdb: invert the USB touchpad integration assumption (#7161)
The vast majority of touchpads are internal, so let's assume that any USB
touchpad is internal by default (exception: bluetooth) and manually mark the
ones that are external. That's a lot more future-proof than having to mark all
internal touchpads that use USB as internal - that number is only going to
increase.
Michael Biebl [Sat, 21 Oct 2017 06:32:50 +0000 (08:32 +0200)]
modprobe.d: fix directory of modprobe configuration file (#7149)
kmod upstream uses /lib/modprobe.d which means we need to use rootprefix
instead of prefix for installing the modprobe configuration file as
otherwise split-usr systems are broken.
See https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=879191
Alan Jenkins [Thu, 19 Oct 2017 14:00:57 +0000 (15:00 +0100)]
core: systemd-shutdown: add missing check for umount_changed
The assumption was that nothing changes in the final attempt. This
would be confusing if a filesystem with a process in uninterruptible
sleep suddenly became un-stuck for the final attempt, but we still give
up and don't try to e.g. unmount any parent mounts.
I don't know how possible that is. But the code will be easier to read
without an assumption that it does not attempt to justify.
When using strftime in arbitrary locales, we cannot really say how big the
buffer should be. Let's make the buffer "large", which will work fine pretty
much always, and just print n/a if the timestamp does not fit. strftime returns
0 if the buffer is too small and a NUL-terminated string otherwise, so we
can drop the size specifications in string formatting.
$ export LANG=fa_IR.UTF-8
$ date
چهارشنبه ۱۸ اكتبر ۱۷، ساعت ۱۰:۵۴:۲۴ (+0330)
$ timedatectl
Assertion 'xstrftime: a[] must be big enough' failed at ../src/timedate/timedatectl.c:105, function print_status_info(). Aborting.
now:
$ timedatectl
Local time: چهارشنبه 2017-10-18 16:29:40 CEST
Universal time: چهارشنبه 2017-10-18 14:29:40 UTC
RTC time: چهارشنبه 2017-10-18 14:29:40
…
Susant Sahani [Wed, 18 Oct 2017 10:38:56 +0000 (16:08 +0530)]
networkd: don't stop the dhcp server if it's not configured. (#7083)
we call sd_dhcp_server_stop even if it's not configured when link is
down resulting unwanted logs.
```
Oct 10 13:41:07 nena systemd-networkd[126]: eth0: Lost carrier
Oct 10 13:41:07 nena systemd-networkd[126]: DHCP CLIENT (0x560f2dc5): STOPPED
Oct 10 13:41:07 nena systemd-networkd[126]: eth0: DHCP lease lost
Oct 10 13:41:07 nena systemd-networkd[126]: NDISC: Stopping IPv6 Router Solicitation client
Oct 10 13:41:07 nena systemd-networkd[126]: Assertion 'server' failed at ../src/libsystemd-network/sd-dhcp-server.c:256, function sd_dhcp_server_stop(). Ignoring.
```
Lubomir Rintel [Wed, 18 Oct 2017 06:38:50 +0000 (08:38 +0200)]
core: fragments of masked units ought not be considered for NeedDaemonReload (#7060)
The units that are not loaded don't have dropin_paths set. This
currently results in units that have fragments to always have
NeedDaemonReload=true when masked:
$ find {/usr/lib,/run/user/8086}/systemd/user/meh.service* |xargs ls -ld
lrwxrwxrwx. 1 lkundrak lkundrak 9 Oct 11 11:19 /run/user/8086/systemd/user/meh.service -> /dev/null
-rw-rw-r--. 1 root root 49 Oct 11 10:16 /usr/lib/systemd/user/meh.service
drwxrwxr-x. 2 root root 4096 Oct 11 10:50 /usr/lib/systemd/user/meh.service.d
-rw-rw-r--. 1 root root 666 Oct 11 10:50 /usr/lib/systemd/user/meh.service.d/override.conf
$ systemctl --user daemon-reload
$ busctl --user get-property org.freedesktop.systemd1 \
/org/freedesktop/systemd1/unit/meh_2eservice \
org.freedesktop.systemd1.Unit NeedDaemonReload
b true
Susant Sahani [Wed, 18 Oct 2017 06:25:57 +0000 (11:55 +0530)]
networkd: Don't stop networkd if CONFIG_FIB_RULES=n in kernel (#7030)
If FIB Rules are not supported by the kernel then networkd fails to
start as it retuns error=-EOPNOTSUPP.
In this case just ignore and let start networkd.
```
Oct 08 10:22:24 naomi systemd[1]: Starting Network Service...
Oct 08 10:22:24 naomi systemd-networkd[983]: Could not enumerate rules: Operation not supported
Oct 08 10:22:24 naomi systemd[1]: systemd-networkd.service: Main process exited, code=exited, status=1/FAILURE
```
Yu Watanabe [Tue, 17 Oct 2017 23:57:54 +0000 (08:57 +0900)]
core: fix invalid error message
The error message corresponds to EILSEQ is "Invalid or incomplete
multibyte or wide character", and is not suitable in this case.
So, let's show a custom error message when the function
dynamic_creds_realize() returns -EILSEQ.
units: replace remote-cryptsetup-pre.target with remote-fs-pre.target
remote-cryptsetup-pre.target was designed as an active unit (that pulls in
network-online.target), the opposite of remote-fs-pre.target (a passive unit,
with individual provider services ordering itself before it and pulling it in,
for example iscsi.service and nfs-client.target).
To make remote-cryptsetup-pre.target really work, those services should be
ordered before it too. But this would require updates to all those services,
not just changes from systemd side.
But the requirements for remote-fs-pre.target and remote-cryptset-pre.target
are fairly similar (e.g. iscsi devices can certainly be used for both), so
let's reuse remote-fs-pre.target also for remote cryptsetup units. This loses
a bit of flexibility, but does away with the requirement for various provider
services to know about remote-cryptsetup-pre.target.
Michal Sekletar [Mon, 16 Oct 2017 14:15:05 +0000 (16:15 +0200)]
mount: make sure we unmount tmpfs mounts before we deactivate swaps (#7076)
In the past we introduced this property just for tmp.mount. However on
todays systems usually there are many more tmpfs mounts. Most notably
mounts backing XDG_RUNTIME_DIR for each user.
Let's generalize what we already have for tmp.mount and implement the
ordering After=swap.target for all tmpfs based mounts.
Christian Hesse [Fri, 13 Oct 2017 07:10:26 +0000 (09:10 +0200)]
man: update changes about gateway -> _gateway (#7085)
Commit 5248e7e1f11aba6859de0b28f0dd3778b22842f2
(resolved,nss-myhostname: use _gateway for the gateway) changed how the
gateway is resolved. Reflect the change in documentation.
units: add [Install] section to remote-cryptsetup.target
This makes this target the same as remote-fs.target in this regard. In practice
it probably doesn't make that much difference, because all encrypted devices
that are part of remote-fs.target (marked with _netdev) will be used for mount
points, so they will be pulled in anyway individually, but with this change any
such device will be configured, even if it is not pulled by any other unit.
Vito Caputo [Thu, 12 Oct 2017 06:14:07 +0000 (23:14 -0700)]
shared: add vectorized parse_field() (#7056)
By vectorizing parse_field() the chain of parse_field() calls in
output_short() can be replaced with a single call receiving a description
of the desired fields and their targets.
While at it, eliminate the repeated strlen() calls performed on constant
field names by making parse_field() receive the field length, and storing
it in the ParseFieldVec at compile time.
Also sort the output_short() fields so the short ones are tried first, for
a minor efficiency gain.
In addition to making the code less repetitive, gcc in my tests now inlines
the parse_fieldv() call in output_short().
It always bothered me a bit that unit-name.[ch] contains so many
definitions that aren't really have much to do with unit nameing, for
example all the unit state definitions.
With this patch unit-name.[ch] is split into two: the file now contains
only the unit naming related operations, and everything else is split
out into a new set of files unit-def.[ch]. That's mostly unit state
stuff as well as dbus path and interface name operations.
No functional changes. This just moves code around.
(Note as both .c files include each other's headers this doesn't make
the build simpler or anything. All it does is make the C files a bit
shorter, and medicate my pretend OCD)
Lubomir Rintel [Wed, 11 Oct 2017 07:29:30 +0000 (09:29 +0200)]
basic/env-util: drop the validation when deserializing environment
The environment variables we've serialized can quite possibly contain
characters outside the set allowed by env_assignment_is_valid(). In
fact, my environment seems to contain a couple of these:
* TERMCAP set by screen contains a '\x7f' character
* BASH_FUNC_module%% variable has a '%' character in name
Strict check of environment variables name and value certainly makes sense for
unit files, but not so much for deserialization of values we already had
in our environment.
Yu Watanabe [Wed, 11 Oct 2017 05:41:13 +0000 (14:41 +0900)]
dynamic-user: permit the case static uid and gid are different
This makes systemd supports the case that DynamicUser=yes and
static user and group exist such that uid and gid of them are different.
We only refuse the operation when user does not exist but the group
with the same name exists.
gwendalcr [Tue, 10 Oct 2017 08:03:38 +0000 (01:03 -0700)]
rules: Add MODEL_ID for NVMe device (#7037)
To mimic MODEL_ID variable built for ATA and SCSI devices, add rules
to add MODEL_ID variable for NVMe devices.
TEST: Check on a system with NVMe device that MODEL_ID variable is
present:
udevadm info --query=all -n /dev/nvme0n1p1 | grep ID_MODEL
and
udevadm info --query=all -n /dev/nvme0n1p1 | grep ID_MODEL
return:
E: ID_MODEL=SAMSUNG...
We generally use the casing "Namespace" for the word, and that's visible
in a number of user-facing interfaces, including "RestrictNamespace=" or
"JoinsNamespaceOf=". Let's make sure to use the same casing internally
too.
man: symlinks are made onto "unit files", not "units"
We should be careful when talking about "units" and "unit files". The
latter should be the concept on disk, and the former, the loaded version
of it. However, as a single unit file can result in multiple loaded
units (think templates), and a units can also exist with no unit file at
all (think .device units), we should be precise.
As symlinks are created on unit files rather than units (as symlinks are
an fs object, and unit files are too, but units are not), let's say so
here.
Some kernel modules may be loaded if the hardware does not exist
(usually when the hardware is hot-pluggable), while others fail with
ENODEV. Let's make those two cases more similar, and simply log
modules which cannot be loaded because of missing hardware without
failing systemd-modules-load.service.
For modules which don't exist, let's warn, but not fail the whole
service. I think a warning is appropriate because it's likely that
a typo was made.
kmod_module_probe_insert_module returns 0 on success, != 0 on failure
More specifically, it should return > 0 only for conditions specified in
probe_flags. We only set KMOD_PROBE_APPLY_BLACKLIST in probe_flags, so the
code was correct, but add an assert to clarify this.
networkd: Automatically set DNS and search domain information
When EmitDNS or EmitDomains is set, automatically look up values
for Router Advertisement DNS and DNS search domain options starting
with the values in the IPv6PrefixDelegationsection, if any. If none
are found, use the values set for the network, and as a last resort
try with the preferred upstream network.
The default DNS lifetime and therefore Router Advertisement interval
is added to the public sd_radv.h header as the DNS lifetime depends
on the maximum advertisement interval.
networkd: Add EmitDNS and EmitDomains configuration options
Add EmitDNS= and EmitDomains= options to the IPv6PrefixDelegation
network configuration file section so that sending DNS servers
and DNS search domains can be configured independent of each other.
g0tar [Thu, 5 Oct 2017 20:17:51 +0000 (22:17 +0200)]
pass currently completed word to systemctl list-unit-files/list-units (#6927)
This change noticeably increases completion performance at the expense
of preventing possible _correct, _approximate or any matcher-list rules.
Still, responsiveness increase so huge seems to make it worth the price.