Martin Schwenke [Sun, 19 Apr 2015 23:53:23 +0000 (09:53 +1000)]
ctdb-scripts: New configuration variable CTDB_NODE_ADDRESS
Required when automatic address detection can not be used. This can
be the case when running multiple ctdbd daemons/nodes on the same
physical host (usually for testing), using InfiniBand for the private
network or on Linux when sysctl net.ipv4.ip_nonlocal_bind=1.
Signed-off-by: Martin Schwenke <martin@meltin.net> Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Apr 27 06:10:08 CEST 2015 on sn-devel-104
Martin Schwenke [Sat, 18 Apr 2015 12:00:49 +0000 (22:00 +1000)]
ctdb-scripts: Changed uses of "ctdb xpnn" to ctdb_get_pnn()
"ctdb xpnn" does not work when sysctl net.ipv4.ip_nonlocal_bind=1,
since it determines the node by attempting to bind to each addres in
the nodes file. The solution is to not use "ctdb xpnn". After the
initial call, ctdb_get_pnn() will be more efficient that "ctdb xpnn".
Signed-off-by: Martin Schwenke <martin@meltin.net> Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Martin Schwenke [Sat, 18 Apr 2015 11:55:50 +0000 (21:55 +1000)]
ctdb-tests: New function ctdb_set_pnn() to change PNN
ctdb_get_pnn() incorrectly caches to the same file regardless of what
node is selected via FAKE_CTDB_PNN.
Instead, set the PNN using new function ctdb_get_pnn(), which also
makes CTDB_VARDIR point to a node-specific subdirectory. This means
that ctdb_get_pnn() will correctly cache to the node-specific
directory.
Fake tickle and TDB files/directories used by the ctdb stub need to be
the same across all PNNs, so change these to use
$EVENTSCRIPTS_TESTS_VAR_DIR instead of node-specific $CTDB_VARDIR.
Signed-off-by: Martin Schwenke <martin@meltin.net> Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Ralph Boehme <slow@samba.org> Reviewed-by: Jelmer Vernooij <jelmer@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Sun Apr 26 18:40:39 CEST 2015 on sn-devel-104
Jeremy Allison [Fri, 24 Apr 2015 20:19:30 +0000 (13:19 -0700)]
s4: rpc: Refactor dcesrv_alter() function into setup and send steps.
Fixes bug:
https://bugzilla.samba.org/show_bug.cgi?id=11236
Based on code from Julien Kerihuel <j.kerihuel@openchange.org>
Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Apr 25 02:43:22 CEST 2015 on sn-devel-104
Michael Adam [Thu, 23 Apr 2015 11:40:17 +0000 (13:40 +0200)]
docs: correctly depend on used xsl files and catalog for building manpages.t
So changes in (e.g.) our man.xsl will trigger a rebuild of the manpages.
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Fri Apr 24 15:39:31 CEST 2015 on sn-devel-104
This adds the correct salt principal to the secretsdb so that we
generate a valid keytab entries for AES and DES keys. The test doesn't
fails with Heimdal cause it always uses RC4 which doesn't have a salt.
Signed-off-by: Andreas Schneider <asn@samba.org> Reviewed-by: Andrew Bartlet <abartlet@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Apr 24 13:02:37 CEST 2015 on sn-devel-104
Petr Viktorin [Wed, 12 Nov 2014 18:49:45 +0000 (19:49 +0100)]
buildtools: Use all of pyext_PATTERN in map_shlib_extension
In Python 3, C extension module filenames have an ABI tag;
the pyext_PATTERN is e.g. "%s.cpython-34m.so".
The build system was only using the last dot-separated element
of that extension (the ".so").
Use the whole extension when constructing the final filename.
Signed-off-by: Petr Viktorin <pviktori@redhat.com> Reviewed-By: Jelmer Vernooij <jelmer@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date(master): Fri Apr 24 04:26:45 CEST 2015 on sn-devel-104
Petr Viktorin [Wed, 12 Nov 2014 15:53:33 +0000 (16:53 +0100)]
buildtools: Honor LDVERSION when looking for Python library
Since Python 3.2, Python .so files are tagged for ABI compatibility,
so the library name is something like libpython3.4m.so (note the 'm').
This information is found in distutils.sysconfig.get_config_var('LDVERSION')
This fixes waf issue 1405 (https://code.google.com/p/waf/issues/detail?id=1405)
Signed-off-by: Petr Viktorin <pviktori@redhat.com> Reviewed-By: Jelmer Vernooij <jelmer@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org>
Petr Viktorin [Fri, 6 Mar 2015 17:57:00 +0000 (18:57 +0100)]
pytalloc: Fix comparison of disparate types
When fed Python objects of different types, pytalloc_default_cmp
compared pointers to PyType objects that weren't part of an array,
resulting in undefined behavior.
This makes things a bit better (though it still casts ptrdiff_t to int).
Signed-off-by: Petr Viktorin <pviktori@redhat.com> Reviewed-By: Jelmer Vernooij <jelmer@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org>
Michael Adam [Thu, 23 Apr 2015 08:38:15 +0000 (10:38 +0200)]
docs: overhaul the description of "smb encrypt" to include SMB3 encryption.
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Apr 24 00:53:20 CEST 2015 on sn-devel-104
Richard Sharpe [Thu, 23 Apr 2015 19:36:28 +0000 (12:36 -0700)]
Make sure we initialize conn to NULL, because a routine we call may give an error and not touch conn, and then we get an error when trying to TALLOC_FREE it.
Signed-off-by: Richard Sharpe <rsharpe@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
s4-torture: add one more test for witness_RegisterEx() and invalid sharenames.
Guenther
Signed-off-by: Günther Deschner <gd@samba.org> Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Wed Apr 22 20:21:18 CEST 2015 on sn-devel-104
Michael Adam [Wed, 24 Sep 2014 08:30:17 +0000 (10:30 +0200)]
param: remove two unused #defines
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Ira Cooper <ira@samba.org>
Autobuild-User(master): Ira Cooper <ira@samba.org>
Autobuild-Date(master): Wed Apr 22 16:37:12 CEST 2015 on sn-devel-104
Michael Adam [Tue, 21 Apr 2015 13:24:42 +0000 (15:24 +0200)]
s3:param: remove arg save_defaults from lp_load_with_registry_shares()
This is only used in command line contexts, especially for testparm
which relies on safe defaults. The only changed use is in sharesec,
but it does not harm to also safe the defaults there.
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Ira Cooper <ira@samba.org>
Michael Adam [Wed, 6 Aug 2014 14:20:42 +0000 (16:20 +0200)]
s3:param: in lp_load_initial_only(), make sure to save defaults.
This is the initial loading of the config in the daemons (and some tools).
So we should save the defaults here. This should especially take into account
some dynamic defaults like log file and maybe some changed values
handed in via the command line.
Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-by: Ira Cooper <ira@samba.org>
Richard Sharpe [Sat, 18 Apr 2015 15:40:14 +0000 (08:40 -0700)]
Convert all uses of uint8/16/32 to uint8/16/32_t in the libads code.
Signed-off-by: Richard Sharpe <rsharpe@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Apr 22 06:22:29 CEST 2015 on sn-devel-104
Ralph Boehme [Fri, 17 Apr 2015 07:12:59 +0000 (09:12 +0200)]
s3:smbd: update comment to correctly reflect MS-SMB2
Signed-off-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Apr 22 01:04:02 CEST 2015 on sn-devel-104
Ralph Boehme [Tue, 21 Apr 2015 16:58:09 +0000 (18:58 +0200)]
s3:lib: use talloc_get_type_abort
Signed-off-by: Ralph Boehme <slow@samba.org> Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Tue Apr 21 22:14:07 CEST 2015 on sn-devel-104
This causes the talloc.3 build to be reproducible. We're trying to
make all builds in Debian reproducible - see
https://wiki.debian.org/ReproducibleBuilds/About for reasoning.
Change-Id: I9bd64d1783abfb33211cbc9dc9c2bbf6db047f3e Signed-Off-By: Jelmer Vernooij <jelmer@samba.org> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sun Apr 19 03:05:53 CEST 2015 on sn-devel-104
Signed-off-by: Anoop C S <achiraya@redhat.com> Reviewed-by: Jeremy Allison <jra@samba.org> Reviewed-by: Christof Schmitt <cs@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Apr 18 01:33:04 CEST 2015 on sn-devel-104
Jeremy Allison [Wed, 15 Apr 2015 17:36:00 +0000 (10:36 -0700)]
s3: locking: Add a memcache based lock cache.
Based on an idea by Volker to optimize cpu usage when
parsing struct share_mode_data entries.
Add a 64-bit sequence number to the share mode entry,
and after the entry is stored back in the db, cache
the in-memory version using talloc reparenting into the
memcache. The memcache key used is the same struct file_id
used as the key into the locking db.
On read, check if the locking db version sequence number
matches the in-memory cache, and if so reparent the
memcache version back onto the required memory context.
Saves all the ndr decoding when multiple accesses to the
same lock entry happen in succession.
Design also improved by Metze and Ira.
Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: Ira Cooper <ira@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Apr 17 22:38:34 CEST 2015 on sn-devel-104
Due to usage of CTDB_NO_MEMORY macro,
some of the resources are not freed in failure cases.
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Guenther Deschner <gd@samba.org> Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Fri Apr 17 16:49:05 CEST 2015 on sn-devel-104
Querying the fileset id requires additional GPFS API calls and also
opening a directory, which might have other side effects. A better
option would be configuring the file system with --filesetdf, then the
fileset quota is automatically reflected in the free space information
reported from gpfs.
Signed-off-by: Christof Schmitt <cs@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Richard Sharpe [Tue, 14 Apr 2015 14:02:37 +0000 (07:02 -0700)]
Change all uses of uint16/uint32/uint64 to uintXX_t in smb.h.
Signed-off-by: Richard Sharpe <rsharpe@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Apr 16 23:44:00 CEST 2015 on sn-devel-104
projects / thirdparty / samba.git / log
