Marcus Shawcroft [Fri, 20 Mar 2015 19:08:00 +0000 (19:08 +0000)]
Refactor generation of 835769 workaround stubs.
This patch recognizes that we only need to perform one scan for the
835769 errata and that this scan can take place before we insert
branch stubs. The erratum scan code is relocated and adjusted to
create stub entries directly rather than populating an intermediate
representation. Since stub entries are created immediately we can
drop the adhoc stub size adjustment code and allow the generic stub
sizing code to deal with 835769 stub entries.
This patch restructures the code but does not change the workaround
used to deal with erratum 83679, the exact placement of workaround
stubs in the final image may change slightly after this patch due to
stubs being created in a different order.
H.J. Lu [Mon, 5 Jan 2015 12:42:37 +0000 (04:42 -0800)]
Assign file position for .strtab only if needed
bfd/
PR ld/17773
* elflink.c (bfd_elf_final_link): Assign the file position for
the symbol string table only there are symbols to be emitted.
ld/testsuite/
PR ld/17773
* ld-elf/binutils.exp (binutils_test): Add an optional
readelf_options. Replace -l with $readelf_options. Add a
gap test.
* ld/testsuite/ld-elf/gap.s: New file.
Matthew Fortune [Tue, 16 Dec 2014 12:39:22 +0000 (12:39 +0000)]
Rework the alignment check for BFD_RELOC_MIPS_18_PCREL_S3.
gas/
* config/tc-mips.c (md_apply_fix): Apply alignment check
to the symbol and offset rather than *valP for
BFD_RELOC_MIPS_18_PCREL_S3. Also update the error message
for BFD_RELOC_MIPS_19_PCREL_S2.
gas/testsuite/
* gas/mips/r6-64.s: Remove .align directives from LDPC
instructions and add further tests for LDPC.
* gas/mips/r6-64-n32.d: remove the NOPs from LDPC expected
output and update for new tests.
* gas/mips/r6-64-n64.d: Likewise.
* gas/mips/ldpc-unalign.l: New file.
* gas/mips/ldpc-unalign.s: Likewise.
* gas/mips/mips.exp: Run ldpc-unalign test.
Matthew Fortune [Thu, 18 Dec 2014 20:08:38 +0000 (20:08 +0000)]
Fix undefined weak symbol reloc tests
ld/testsuite/
* ld-mips-elf/mips-elf.exp: Update undefweak-overflow tests.
* ld-mips-elf/undefweak-overflow-n32.d: Remove.
* ld-mips-elf/undefweak-overflow-n64.d: Likewise.
* ld-mips-elf/undefweak-overflow.s: Set mips64r6, noreorder and
add a label to mark the micromips region.
* ld-mips-elf/undefweak-overflow.d: Update expected output.
Andrew Bennett [Thu, 20 Nov 2014 15:40:16 +0000 (15:40 +0000)]
[MIPS] When calculating a relocation using an undefined weak symbol don't check for overflow.
In MIPS the relocation calculation only ignores the overflow checks for undefined
weak symbols on relocations associated with j/jal. This patch extends this to
the relocations used by the: b* instructions; pc/gp relative symbol offsets; and the
lwpc/ldpc MIPS r6 instructions.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): Only check for overflow
on non-weak undefined symbols.
ld/testsuite/
* ld-mips-elf/mips-elf.exp: Add in undefined weak overflow tests for
o32, n32 and n64.
* ld-mips-elf/undefweak-overflow.s: New test.
* ld-mips-elf/undefweak-overflow.d: New test.
* ld-mips-elf/undefweak-overflow-n32.d: New test.
* ld-mips-elf/undefweak-overflow-n64.d: New test.
H.J. Lu [Sun, 14 Dec 2014 07:37:22 +0000 (23:37 -0800)]
Handle weak alias for PIE with copy reloc
When there is a weak symbol with a real definition, the processor
independent code will have arranged for us to see the real definition
first. We need to copy the needs_copy bit from the real definition and
check it when allowing copy reloc in PIE.
bfd/
PR ld/17689
* elf64-x86-64.c (elf_x86_64_link_hash_entry): Add needs_copy.
Change has_bnd_reloc to bit field.
(elf_x86_64_link_hash_newfunc): Initialize needs_copy and
has_bnd_reloc to 0.
(elf_x86_64_check_relocs): Set has_bnd_reloc to 1 instead
of TRUE.
(elf_x86_64_adjust_dynamic_symbol): Copy needs_copy from the
real definition to a weak symbol.
(elf_x86_64_allocate_dynrelocs): Also check needs_copy of a
weak symbol for PIE when discarding space for relocs against
symbols which turn out to need copy relocs.
(elf_x86_64_relocate_section): Also check needs_copy of a
weak symbol for PIE with copy reloc.
H.J. Lu [Thu, 4 Dec 2014 22:19:41 +0000 (14:19 -0800)]
Add _bfd_elf_ifunc_get_synthetic_symtab
In i386 and x86-64 binaries with ifunc, relocations against .got.plt
section may not be in the same order as entries in PLT section. This
patch adds _bfd_elf_ifunc_get_synthetic_symtab. It takes a function
pointer which returns an array of PLT entry symbol values. It calls
the function pointer to get the PLT entry symbol value array indexed
by relocation index, instead of calling plt_sym_val on each relocation
index.
Mixing 64-bit and 32-bit types led to the wrong promotions. Keep
calculation in same type. Also fix a case where PLTREL24 reloc addend
should be ignored.
* Powerpc.cc (Target_powerpc::Branch_info::make_stub): Ignore
addend of PLTREL24 reloc when not generating a plt stub. Make
max_branch_offset an "Address".
(Target_powerpc::Relocate::relocate): Make max_branch_offset
an "Address".
Alan Modra [Wed, 3 Dec 2014 05:47:23 +0000 (16:17 +1030)]
powerpc gold, work around pr17670
pr17670 is about an assert triggering on a branch to an undefined
weak symbol, the symbol being undefined due to dropping its comdat
group section. (Well sort of. The symbol is actually defined in
an .opd section which isn't part of the group, but the code section
the opd entry points at is dropped.) So don't assert.
Also, don't make long branch stubs to such symbols, and arrange to
have target-reloc.h code warn when applying relocs that use the sym.
PR 17670
* symtab.cc (Symbol::set_undefined): Remove assertion.
* powerpc.cc (Target_powerpc::symval_for_branch): Don't assert
on symbols defined in discarded sections, instead return false.
Rearrange params, update all callers.
(Target_powerpc::Branch_info::make_stub): Don't make stubs for
branches to syms in discarded sections.
(Global_symbol_visitor_opd::operator()): Set discarded opd syms
undefined and flag as discarded.
(Target_powerpc::Relocate::relocate): Localize variable.
H.J. Lu [Tue, 2 Dec 2014 23:14:28 +0000 (15:14 -0800)]
X86-64: Allow copy relocs for building PIE
This patch allows copy relocs for non-GOT pc-relative relocation in PIE.
bfd/
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Always
allow copy relocs for building executables.
(elf_x86_64_adjust_dynamic_symbol): Allocate copy relocs for
PIE.
(elf_x86_64_allocate_dynrelocs): For PIE, discard space for
relocs against symbols which turn out to need copy relocs.
(elf_x86_64_relocate_section): Don't copy a pc-relative
relocation into the output file if the symbol needs copy reloc.
Alan Modra [Thu, 27 Nov 2014 04:46:49 +0000 (15:16 +1030)]
Don't output symbol version definitions for non-DT_NEEDED libs
PR 16452, 16457
* elflink.c (_bfd_elf_link_find_version_dependencies): Exclude
symbols from libraries that won't be listed in DT_NEEDED.
(elf_link_output_extsym): Don't output verdefs for such symbols.
Alan Modra [Wed, 26 Nov 2014 00:25:58 +0000 (10:55 +1030)]
[GOLD] PowerPC relaxation corner case
It's possible for the section grouping code to decide that the last
section looked at (the first section by address) doesn't fit into a
group. In one case that section is already a group owner and that is
handled correctly. In other cases the section should be put into its
own group. Like this:
* powerpc.cc (Stub_control::set_output_and_owner): New function.
(Target_powerpc::group_sections): Use it.
Cary Coutant [Tue, 25 Nov 2014 21:55:42 +0000 (13:55 -0800)]
Fix corrupted .eh_frame section with LTO and --gc-sections.
Backport from trunk:
When --gc-sections is turned on during an LTO link, the .eh_frame sections
from deferred files are processed before those from the replacement files.
As a result, the section end-cap from crtendS.o is placed ahead of
the .eh_frame data from the replacement files. This patch fixes the bug
by skipping the layout of the deferred sections during GC pass 2.
gold/
PR gold/17639
* object.cc (Sized_relobj_file): Initialize is_deferred_layout_.
(Sized_relobj_file::do_layout): Handle deferred sections properly
during GC pass 1. Don't add reloc sections to deferred list twice.
* object.h (Sized_relobj_file::is_deferred_layout): New function.
(Sized_relobj_file::is_deferred_layout_): New data member.
Alan Modra [Mon, 24 Nov 2014 02:11:33 +0000 (12:41 +1030)]
PowerPC64 --plt-align
Alignment of plt stubs was broken, firstly because the option was
being dropped due to the alignment value not being set in the "params"
struct used in elf64-ppc.c, and secondly due to not calculating the
number of alignment boundary crossings correctly.
bfd/
* elf64-ppc.c (plt_stub_pad): Correct.
ld/
* ld.texinfo: Correct --plt-align documentation.
* emultempl/ppc64elf.em (plt_stub_align): Delete. Use and set
params.plt_stub_align instead.
Alan Modra [Thu, 20 Nov 2014 08:31:23 +0000 (19:01 +1030)]
PPC gold doesn't check for overflow properly
Corrects overflow test for rel14, addr14, rel24, addr24 branch relocs,
and prints an information message to give a hint as to how a branch
that can't reach a stub might be cured.
bfd/
* elf64-ppc.c (group_sections): Init stub14_group_size from
--stub-group-size parameter divided by 1024.
gold/
* powerpc.cc (Stub_control::Stub_control): Init stub14_group_size_
from --stub-group-size parameter divided by 1024.
(Powerpc_relocate_functions::rela, rela_ua): Add fieldsize
template parameter. Update all uses.
(Target_powerpc::Relocate::relocate): Rename has_plt_value to
has_stub_value. Set for long branches. Don't report overflow for
branch to undefined weak symbols. Print info message on
overflowing branch to stub.
Alan Modra [Wed, 19 Nov 2014 22:22:46 +0000 (08:52 +1030)]
Default powerpc64 to --plt-thread-safe for Go
Go is multi-threaded, so use thread-safe plt stubs. __go_go doesn't
actually start threads, but is a convenient libgo function with a
reasonably unique name that is called by all Go executables. (Threads
are started by a static function of libgo, runtime_newosproc, called
by a whole lot of global functions, including runtime_starttheworld
and runtime_main.)
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Add __go_go to thread_starters.
gold/
* powerpc.cc (Target_powerpc::do_relax): Add __go_go to thread_starters.
projects / thirdparty / binutils-gdb.git / log
