On bpf(BPF_PROG_LOAD) syscall user-supplied BPF programs are
translated by the verifier into "xlated" BPF programs. During this
process the original instructions offsets might be adjusted and/or
individual instructions might be replaced by new sets of instructions,
or deleted.
Add a new BPF map type which is aimed to keep track of how, for a
given program, the original instructions were relocated during the
verification. Also, besides keeping track of the original -> xlated
mapping, make x86 JIT to build the xlated -> jitted mapping for every
instruction listed in an instruction array. This is required for every
future application of instruction arrays: static keys, indirect jumps
and indirect calls.
A map of the BPF_MAP_TYPE_INSN_ARRAY type must be created with a u32
keys and value of size 8. The values have different semantics for
userspace and for BPF space. For userspace a value consists of two
u32 values – xlated and jitted offsets. For BPF side the value is
a real pointer to a jitted instruction.
On map creation/initialization, before loading the program, each
element of the map should be initialized to point to an instruction
offset within the program. Before the program load such maps should
be made frozen. After the program verification xlated and jitted
offsets can be read via the bpf(2) syscall.
If a tracked instruction is removed by the verifier, then the xlated
offset is set to (u32)-1 which is considered to be too big for a valid
BPF program offset.
One such a map can, obviously, be used to track one and only one BPF
program. If the verification process was unsuccessful, then the same
map can be re-used to verify the program with a different log level.
However, if the program was loaded fine, then such a map, being
frozen in any case, can't be reused by other programs even after the
program release.
Example. Consider the following original and xlated programs:
An instruction array map, containing, e.g., instructions [0,4,7,12]
will be translated by the verifier to [0,4,13,20]. A map with
index 5 (the middle of 16-byte instruction) or indexes greater than 12
(outside the program boundaries) would be rejected.
The functionality provided by this patch will be extended in consequent
patches to implement BPF Static Keys, indirect jumps, and indirect calls.
Andrii Nakryiko [Tue, 4 Nov 2025 21:44:12 +0000 (13:44 -0800)]
Merge branch 'multi-split-btf-fixes-and-test'
Alan Maguire says:
====================
Multi-split BTF fixes and test
This small series consists of a fix to multi-split BTF parsing
(patch 1) and a test which exercises (multi-)split BTF parsing
(patch 2).
Changes since v3 [1]
- add asserts to ensure number of types in original and parsed
BTF are identical, and the calls to btf__type_by_id() return
valid pointers (code review bot, patch 2)
Changes since v2 [2]
- fix Fixes: tag formatting (Andrii, patch 1)
- BPF code-review bot saw we were doing ASSERT_OK_PTR() on wrong
BTF (not multisplit) in patch 2
- ensure cleanup is correctly handled for BTF, unlink in split
tests (Andrii, patch 2)
Changes since v1 [3]
- BPF code-review bot spotted another place that the string offset
needed to be adjusted based upon base start string offset + header
string offset.
- added selftests to extend split BTF testing to parsing
Alan Maguire [Tue, 4 Nov 2025 20:33:08 +0000 (20:33 +0000)]
libbpf: Fix parsing of multi-split BTF
When creating multi-split BTF we correctly set the start string offset
to be the size of the base string section plus the base BTF start
string offset; the latter is needed for multi-split BTF since the
offset is non-zero there.
Unfortunately the BTF parsing case needed that logic and it was
missed.
Jianyun Gao [Mon, 3 Nov 2025 12:07:27 +0000 (20:07 +0800)]
libbpf: Update the comment to remove the reference to the deprecated interface bpf_program__load().
Commit be2f2d1680df ("libbpf: Deprecate bpf_program__load() API") marked
bpf_program__load() as deprecated starting with libbpf v0.6. And later
in commit 146bf811f5ac ("libbpf: remove most other deprecated high-level
APIs") actually removed the bpf_program__load() implementation and
related old high-level APIs.
This patch update the comment in bpf_program__set_attach_target() to
remove the reference to the deprecated interface bpf_program__load().
====================
bpf: Skip bounds adjustment for conditional jumps on same scalar register
This small patchset is about avoid verifier bug warning when conditional
jumps on same register when the register holds a scalar with range.
v4:
- make code better. (Alexei)
v3:
https://lore.kernel.org/bpf/20251031154107.403054-1-kafai.wan@linux.dev/
- Enhance is_scalar_branch_taken() to handle scalar case. (Eduard)
- Update the selftest to cover all conditional jump opcodes. (Eduard)
v2:
https://lore.kernel.org/bpf/20251025053017.2308823-1-kafai.wan@linux.dev/
- Enhance is_branch_taken() and is_scalar_branch_taken() to handle
branch direction computation for same register. (Eduard and Alexei)
- Update the selftest.
KaFai Wan [Mon, 3 Nov 2025 06:31:08 +0000 (14:31 +0800)]
selftests/bpf: Add test for conditional jumps on same scalar register
Add test cases to verify the correctness of the BPF verifier's branch analysis
when conditional jumps are performed on the same scalar register. And make sure
that JGT does not trigger verifier BUG.
KaFai Wan [Mon, 3 Nov 2025 06:31:07 +0000 (14:31 +0800)]
bpf: Skip bounds adjustment for conditional jumps on same scalar register
When conditional jumps are performed on the same scalar register
(e.g., r0 <= r0, r0 > r0, r0 < r0), the BPF verifier incorrectly
attempts to adjust the register's min/max bounds. This leads to
invalid range bounds and triggers a BUG warning.
The instruction 3 triggers kernel warning:
3: if r0 > r0 goto <exit>
true_reg1: range bounds violation u64=[0x1, 0x0] s64=[0x1, 0x0] u32=[0x1, 0x0] s32=[0x1, 0x0] var_off=(0x0, 0x0)
true_reg2: const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] var_off=(0x0, 0x0)
Comparing a register with itself should not change its bounds and
for most comparison operations, comparing a register with itself has
a known result (e.g., r0 == r0 is always true, r0 < r0 is always false).
Fix this by:
1. Enhance is_scalar_branch_taken() to properly handle branch direction
computation for same register comparisons across all BPF jump operations
2. Adds early return in reg_set_min_max() to avoid bounds adjustment
for unknown branch directions (e.g., BPF_JSET) on the same register
The fix ensures that unnecessary bounds adjustments are skipped, preventing
the verifier bug while maintaining correct branch direction analysis.
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn> Reported-by: Yinhao Hu <dddddd@hust.edu.cn> Closes: https://lore.kernel.org/all/1881f0f5.300df.199f2576a01.Coremail.kaiyanm@hust.edu.cn/ Signed-off-by: KaFai Wan <kafai.wan@linux.dev> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20251103063108.1111764-2-kafai.wan@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Linus Torvalds [Sat, 1 Nov 2025 17:49:12 +0000 (10:49 -0700)]
Merge tag 'regulator-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A simple fix for a missed part of an API conversion in the bd718x7
driver"
* tag 'regulator-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: bd718x7: Fix voltages scaled by resistor divider
Linus Torvalds [Sat, 1 Nov 2025 17:45:39 +0000 (10:45 -0700)]
Merge tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers"
* tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Correct documentation of wake_invert flag
regmap: slimbus: fix bus_context pointer in regmap init calls
Linus Torvalds [Sat, 1 Nov 2025 17:20:07 +0000 (10:20 -0700)]
Merge tag 'x86-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Limit AMD microcode Entrysign sha256 signature checking to
known CPU generations
- Disable AMD RDSEED32 on certain Zen5 CPUs that have a
microcode version before when the microcode-based fix was
issued for the AMD-SB-7055 erratum
- Fix FPU AMD XFD state synchronization on signal delivery
- Fix (work around) a SSE4a-disassembly related build failure
on X86_NATIVE_CPU=y builds
- Extend the AMD Zen6 model space with a new range of models
- Fix <asm/intel-family.h> CPU model comments
- Fix the CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y build, which
was unhappy due to missing kCFI type annotations of clear_page()
variants
* tag 'x86-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Ensure clear_page() variants always have __kcfi_typeid_ symbols
x86/cpu: Add/fix core comments for {Panther,Nova} Lake
x86/CPU/AMD: Extend Zen6 model range
x86/build: Disable SSE4a
x86/fpu: Ensure XFD state on signal delivery
x86/CPU/AMD: Add RDSEED fix for Zen5
x86/microcode/AMD: Limit Entrysign signature checking to known generations
Linus Torvalds [Sat, 1 Nov 2025 17:17:40 +0000 (10:17 -0700)]
Merge tag 'perf-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Miscellaneous fixes and CPU model updates:
- Fix an out-of-bounds access on non-hybrid platforms in the Intel
PMU DS code, reported by KASAN
- Add WildcatLake PMU and uncore support: it's identical to the
PantherLake version"
* tag 'perf-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add uncore PMU support for Wildcat Lake
perf/x86/intel: Add PMU support for WildcatLake
perf/x86/intel: Fix KASAN global-out-of-bounds warning
Linus Torvalds [Sat, 1 Nov 2025 17:07:35 +0000 (10:07 -0700)]
Merge tag 'objtool-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
"Fix objtool warning when faced with raw STAC/CLAC instructions"
* tag 'objtool-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix skip_alt_group() for non-alternative STAC/CLAC
Linus Torvalds [Sat, 1 Nov 2025 17:04:35 +0000 (10:04 -0700)]
Merge tag 'xfs-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"Just a single bug fix (and documentation for the issue)"
* tag 'xfs-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document another racy GC case in xfs_zoned_map_extent
xfs: prevent gc from picking the same zone twice
Linus Torvalds [Sat, 1 Nov 2025 17:00:53 +0000 (10:00 -0700)]
Merge tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support
for it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
* tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig/nconf: Initialize the default locale at startup
kconfig/mconf: Initialize the default locale at startup
KMSAN: Restore dynamic check for '-fsanitize=kernel-memory'
kbuild: align modinfo section for Secureboot Authenticode EDK2 compat
kbuild: install-extmod-build: Fix when given dir outside the build dir
MAINTAINERS: Update Kconfig section
Josh Poimboeuf [Wed, 29 Oct 2025 19:54:08 +0000 (12:54 -0700)]
objtool: Fix skip_alt_group() for non-alternative STAC/CLAC
If an insn->alt points to a STAC/CLAC instruction, skip_alt_group()
assumes it's part of an alternative ("alt group") as opposed to some
other kind of "alt" such as an exception fixup.
While that assumption may hold true in the current code base, Linus has
an out-of-tree patch which breaks that assumption by replacing the
STAC/CLAC alternatives with raw STAC/CLAC instructions.
Make skip_alt_group() more robust by making sure it's actually an alt
group before continuing.
Jakub Horký [Tue, 14 Oct 2025 14:44:06 +0000 (16:44 +0200)]
kconfig/nconf: Initialize the default locale at startup
Fix bug where make nconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Jakub Horký [Tue, 14 Oct 2025 15:49:32 +0000 (17:49 +0200)]
kconfig/mconf: Initialize the default locale at startup
Fix bug where make menuconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
- Reject negative head_room in __bpf_skb_change_head (Daniel Borkmann)
- Conditionally include dynptr copy kfuncs (Malin Jonsson)
- Sync pending IRQ work before freeing BPF ring buffer (Noorain Eqbal)
- Do not audit capability check in x86 do_jit() (Ondrej Mosnacek)
- Fix arm64 JIT of BPF_ST insn when it writes into arena memory
(Puranjay Mohan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
bpf: Reject negative head_room in __bpf_skb_change_head
bpf: Conditionally include dynptr copy kfuncs
libbpf: Fix powerpc's stack register definition in bpf_tracing.h
bpf: Do not audit capability check in do_jit()
bpf: Sync pending IRQ work before freeing ring buffer
selftests/bpf: Add checks in tc_tunnel when entering net namespaces
test_tc_tunnel is missing checks on any open_netns. Add those checks
anytime we try to enter a net namespace, and skip the related operations
if we fail. While at it, reduce the number of open_netns/close_netns for
cases involving operations in two distinct namespaces: the test
currently does the following:
selftests/bpf: Skip tc_tunnel subtest if its setup fails
A subtest setup can fail in a wide variety of ways, so make sure not to
run it if an issue occurs during its setup. The return value is
already representing whether the setup succeeds or fails, it is just
about wiring it.
x86/mm: Ensure clear_page() variants always have __kcfi_typeid_ symbols
When building with CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y, there is a series
of errors from the various versions of clear_page() not having __kcfi_typeid_
symbols.
$ cat kernel/configs/repro.config
CONFIG_CFI=y
# CONFIG_LTO_NONE is not set
CONFIG_LTO_CLANG_FULL=y
$ make -skj"$(nproc)" ARCH=x86_64 LLVM=1 clean defconfig repro.config bzImage
ld.lld: error: undefined symbol: __kcfi_typeid_clear_page_rep
>>> referenced by ld-temp.o
>>> vmlinux.o:(__cfi_clear_page_rep)
With full LTO, it is possible for LLVM to realize that these functions never
have their address taken (as they are only used within an alternative, which
will make them a direct call) across the whole kernel and either drop or skip
generating their kCFI type identification symbols.
clear_page_{rep,orig,erms}() are defined in clear_page_64.S with
SYM_TYPED_FUNC_START as a result of
2981557cb040 ("x86,kcfi: Fix EXPORT_SYMBOL vs kCFI"),
as exported functions are free to be called indirectly thus need kCFI type
identifiers.
Use KCFI_REFERENCE with these clear_page() functions to force LLVM to see
these functions as address-taken and generate then keep the kCFI type
identifiers.
Linus Torvalds [Fri, 31 Oct 2025 21:47:02 +0000 (14:47 -0700)]
Merge tag 'drm-fixes-2025-10-31' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Simona Vetter:
"Looks like stochastics conspired to make this one a bit bigger, but
nothing scary at all. Also first examples of the new Link: tags, yay!
* tag 'drm-fixes-2025-10-31' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/ast: Clear preserved bits from register output value
drm/imx: parallel-display: add the bridge before attaching it
drm/imx: parallel-display: convert to devm_drm_bridge_alloc() API
drm/panel: kingdisplay-kd097d04: Disable EoTp
drm/panel: sitronix-st7789v: fix sync flags for t28cp45tn89
drm/xe: Do not wake device during a GT reset
drm/xe: Fix uninitialized return value from xe_validation_guard()
drm/msm/dpu: Fix adjusted mode clock check for 3d merge
drm/msm/dpu: Disable broken YUV on QSEED2 hardware
drm/msm/dpu: Require linear modifier for writeback framebuffers
drm/msm/dpu: Fix pixel extension sub-sampling
drm/msm/dpu: Disable scaling for unsupported scaler types
drm/msm/dpu: Propagate error from dpu_assign_plane_resources
drm/msm/dpu: Fix allocation of RGB SSPPs without scaling
drm/msm: dsi: fix PLL init in bonded mode
drm/i915/dmc: Clear HRR EVT_CTL/HTP to zero on ADL-S
drm/amd/display: Fix incorrect return of vblank enable on unconfigured crtc
drm/amd/display: Add HDR workaround for a specific eDP
drm/amdgpu: fix SPDX header on cyan_skillfish_reg_init.c
drm/amdgpu: fix SPDX header on irqsrcs_vcn_5_0.h
...
Linus Torvalds [Fri, 31 Oct 2025 21:24:32 +0000 (14:24 -0700)]
Merge tag 'pci-v6.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Restore custom qcom ASPM enablement code so L1 PM Substates are
enabled as they were in v6.17 even though the PCI core now enables
just L0s and L1 by default (Bjorn Helgaas)
- Size prefetchable bridge windows only when they actually exist, to
avoid a WARN_ON() regression (Ilpo Järvinen)
* tag 'pci-v6.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Do not size non-existing prefetchable window
Revert "PCI: qcom: Remove custom ASPM enablement code"
Linus Torvalds [Fri, 31 Oct 2025 21:20:09 +0000 (14:20 -0700)]
Merge tag 'vfio-v6.18-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Fix overflows in vfio type1 backend for mappings at the end of the
64-bit address space, resulting in leaked pinned memory.
New selftest support included to avoid such issues in the future
(Alex Mastro)
* tag 'vfio-v6.18-rc4' of https://github.com/awilliam/linux-vfio:
vfio: selftests: add end of address space DMA map/unmap tests
vfio: selftests: update DMA map/unmap helpers to support more test kinds
vfio/type1: handle DMA map/unmap up to the addressable limit
vfio/type1: move iova increment to unmap_unpin_*() caller
vfio/type1: sanitize for overflow using check_*_overflow()
Ilpo Järvinen [Mon, 27 Oct 2025 13:24:23 +0000 (15:24 +0200)]
PCI: Do not size non-existing prefetchable window
pbus_size_mem() should only be called for bridge windows that exist but
__pci_bus_size_bridges() may point 'pref' to a resource that does not exist
(has zero flags) in case of non-root buses.
When prefetchable bridge window does not exist, the same non-prefetchable
bridge window is sized more than once which may result in duplicating
entries into the realloc_head list. Duplicated entries are shown in this
log and trigger a WARN_ON() because realloc_head had residual entries after
the resource assignment algorithm:
pci 0000:00:03.0: [11ab:6820] type 01 class 0x060400 PCIe Root Port
pci 0000:00:03.0: PCI bridge to [bus 00]
pci 0000:00:03.0: bridge window [io 0x0000-0x0fff]
pci 0000:00:03.0: bridge window [mem 0x00000000-0x000fffff]
pci 0000:00:03.0: bridge window [mem 0x00200000-0x003fffff] to [bus 02] add_size 200000 add_align 200000
pci 0000:00:03.0: bridge window [mem 0x00200000-0x003fffff] to [bus 02] add_size 200000 add_align 200000
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe03fffff]: assigned
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xe03fffff]
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/pci/setup-bus.c:2373 pci_assign_unassigned_root_bus_resources+0x1bc/0x234
Check resource flags of 'pref' and only size the prefetchable window if the
resource has the IORESOURCE_PREFETCH flag.
Fixes: ae88d0b9c57f ("PCI: Use pbus_select_window_for_type() during mem window sizing") Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com> Closes: https://lore.kernel.org/r/51e8cf1c62b8318882257d6b5a9de7fdaaecc343.camel@gmail.com/ Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com> Link: https://patch.msgid.link/20251027132423.8841-1-ilpo.jarvinen@linux.intel.com
Prior to a729c1664619 ("PCI: qcom: Remove custom ASPM enablement code"),
the qcom controller driver enabled ASPM, including L0s, L1, and L1 PM
Substates, for all devices powered on at the time the controller driver
enumerates them.
ASPM was *not* enabled for devices powered on later by pwrctrl (unless the
kernel was built with PCIEASPM_POWERSAVE or PCIEASPM_POWER_SUPERSAVE, or
the user enabled ASPM via module parameter or sysfs).
After f3ac2ff14834 ("PCI/ASPM: Enable all ClockPM and ASPM states for
devicetree platforms"), the PCI core enabled all ASPM states for all
devices whether powered on initially or by pwrctrl, so a729c1664619 was
unnecessary and reverted.
But f3ac2ff14834 was too aggressive and broke platforms that didn't support
CLKREQ# or required device-specific configuration for L1 Substates, so df5192d9bb0e ("PCI/ASPM: Enable only L0s and L1 for devicetree platforms")
enabled only L0s and L1.
On Qualcomm platforms, this left L1 Substates disabled, which was a
regression. Revert a729c1664619 so L1 Substates will be enabled on devices
that are initially powered on. Devices powered on by pwrctrl will be
addressed later.
Fixes: df5192d9bb0e ("PCI/ASPM: Enable only L0s and L1 for devicetree platforms") Reported-by: Johan Hovold <johan@kernel.org> Closes: https://lore.kernel.org/lkml/aPuXZlaawFmmsLmX@hovoldconsulting.com/ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Johan Hovold <johan@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20251024210514.1365996-1-helgaas@kernel.org
Linus Torvalds [Fri, 31 Oct 2025 19:57:19 +0000 (12:57 -0700)]
Merge tag 'block-6.18-20251031' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix blk-crypto reporting EIO when EINVAL is the correct error code
- Two bug fixes for the block zone support
- NVME pull request via Keith:
- Target side authentication fixup
- Peer-to-peer metadata fixup
- null_blk DMA alignment fix
* tag 'block-6.18-20251031' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
null_blk: set dma alignment to logical block size
blk-crypto: use BLK_STS_INVAL for alignment errors
block: make REQ_OP_ZONE_OPEN a write operation
block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL
nvme-pci: use blk_map_iter for p2p metadata
nvmet-auth: update sc_c in host response
Linus Torvalds [Fri, 31 Oct 2025 19:50:35 +0000 (12:50 -0700)]
Merge tag 's390-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Use correct locking in zPCI event code to avoid deadlock
- Get rid of irqs_registered flag in zpci_dev structure and restore IRQ
unconditionally for zPCI devices. This fixes sit uations where the
flag was not correctly updated
- Disable (revert) ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP for s390 again.
The optimized hugetlb vmemmap code modifies kernel page tables in a
way which does not work on s390 and leads to reproducible kernel
crashes due to stale TLB entries. This needs to be addressed with
some larger changes. For now simply disable the feature
- Update defconfigs
* tag 's390-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
s390/mm: Fix memory leak in add_marker() when kvrealloc() fails
s390/pci: Restore IRQ unconditionally for the zPCI device
s390: Update defconfigs
s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdump
Puranjay Mohan [Thu, 30 Oct 2025 12:17:14 +0000 (12:17 +0000)]
bpf/arm64: Fix BPF_ST into arena memory
The arm64 JIT supports BPF_ST with BPF_PROBE_MEM32 (arena) by using the
tmp2 register to hold the dst + arena_vm_base value and using tmp2 as the
new dst register. But this is broken because in case is_lsi_offset()
returns false the tmp2 will be clobbered by emit_a64_mov_i(1, tmp2, off,
ctx); and hence the emitted store instruction will be of the form:
strb w10, [x11, x11]
Fix this by using the third temporary register to hold the dst +
arena_vm_base.
Two functions with identical names but different addresses are
considered ambiguous and removed by "pahole" from vmlinux BTF.
Later resolve_btfids warns since it cannot find them.
Commit 378b7708194f ("sched: Make migrate_{en,dis}able() inline") made
them inlineable in most places, but in vmlinux built with llvm 21 and 22
there are four symbols for migrate_{enable,disable}:
three static functions and one global function.
Fix the issue by marking migrate_{enable,disable} as always inline.
The alternative is to mark them as notrace/nokprobe which is more
drastic. Only bpf programs are prevented from attaching to these
functions. The rest of the tracing shouldn't be affected.
[note: Peter ok-ed the patch, Alexei rewrote commit log]
Fixes: 378b7708194f ("sched: Make migrate_{en,dis}able() inline") Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Menglong Dong <menglong.dong@linux.dev> Link: https://lore.kernel.org/r/20251029183646.3811774-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Linus Torvalds [Fri, 31 Oct 2025 16:34:21 +0000 (09:34 -0700)]
Merge tag '6.18-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix potential UAF in statfs
- DFS fix for expired referrals
- fix minor modinfo typo
- small improvement to reconnect for smbdirect
* tag '6.18-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: call smbd_destroy() in the same splace as kernel_sock_shutdown()/sock_release()
smb: client: handle lack of IPC in dfs_cache_refresh()
smb: client: fix potential cfid UAF in smb2_query_info_compound
cifs: fix typo in enable_gcm_256 module parameter
====================
selftests/bpf: Integrate test_xsk.c to test_progs framework
The test_xsk.sh script covers many AF_XDP use cases. The tests it runs
are defined in xksxceiver.c. Since this script is used to test real
hardware, the goal here is to leave it as it is, and only integrate the
tests that run on veth peers into the test_progs framework.
PATCH 1 extracts test_xsk[.c/.h] from xskxceiver[.c/.h] to make the
tests available to test_progs.
PATCH 2 to 7 fix small issues in the current test
PATCH 8 to 13 handle all errors to release resources instead of calling
exit() when any error occurs.
PATCH 14 isolates the tests that won't fit in the CI
PATCH 15 integrates the CI tests to the test_progs framework
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
---
Changes in v7:
- Restore 'test_ns' prefix to allow parallel execution.
- PATCH 11: fix potential uninitialized variable spotted by AI.
- PACTH 12: fix potential resource leak spotted by AI
- Link to v6: https://lore.kernel.org/r/20251029-xsk-v6-0-5a63a64dff98@bootlin.com
Changes in v6:
- Setup veth peer once for each mode instead of once for each substest
- Rename the 'flaky' table 'skip-ci' table and move the automatically
skipped and the longest tests into it
- Link to v5: https://lore.kernel.org/r/20251016-xsk-v5-0-662c95eb8005@bootlin.com
Changes in v5:
- Rebase on latest bpf-next_base
- Move XDP_ADJUST_TAIL_SHRINK_MULTI_BUFF to the flaky table
- Add Maciej's reviewed-by
- Link to v4: https://lore.kernel.org/r/20250924-xsk-v4-0-20e57537b876@bootlin.com
Changes in v4:
- Fix test_xsk.sh's summary report.
- Merge PATCH 11 & 12 together, otherwise PATCH 11 fails to build.
- Split old PATCH 3 in two patches. The first one fixes
testapp_stats_rx_dropped(), the second one fixes
testapp_xdp_shared_umem(). The unecessary frees (in
testapp_stats_rx_full() and testapp_stats_fill_empty() are removed)
- Link to v3: https://lore.kernel.org/r/20250904-xsk-v3-0-ce382e331485@bootlin.com
Changes in v3:
- Rebase on latest bpf-next_base to integrate commit c9110e6f7237 ("selftests/bpf:
Fix count write in testapp_xdp_metadata_copy()").
- Move XDP_METADATA_COPY_* tests from flaky-tests to nominal tests
- Link to v2: https://lore.kernel.org/r/20250902-xsk-v2-0-17c6345d5215@bootlin.com
Changes in v2:
- Rebase on the latest bpf-next_base and integrate the newly added tests
to the work (adjust_tail* and tx_queue_consumer tests)
- Re-order patches to split xkxceiver sooner.
- Fix the bug reported by Maciej.
- Fix verbose mode in test_xsk.sh by keeping kselftest (remove PATCH 1,
7 and 8)
- Link to v1: https://lore.kernel.org/r/20250313-xsk-v1-0-7374729a93b9@bootlin.com
====================
selftests/bpf: test_xsk: Integrate test_xsk.c to test_progs framework
test_xsk.c isn't part of the test_progs framework.
Integrate the tests defined by test_xsk.c into the test_progs framework
through a new file : prog_tests/xsk.c. ZeroCopy mode isn't tested in it
as veth peers don't support it.
Move test_xsk{.c/.h} to prog_tests/.
Add the find_bit library to test_progs sources in the Makefile as it is
is used by test_xsk.c
Following tests won't fit in the CI:
- XDP_ADJUST_TAIL_* and SEND_RECEIVE_9K_PACKETS because of their
flakyness
- UNALIGNED_* because they depend on huge page allocations
- *_RING_SIZE because they depend on HW rings
- TEARDOWN because it's too long
Remove these tests from the nominal tests table so they won't be
run by the CI in upcoming patch.
Create a skip_ci_tests table to hold them.
Use this skip_ci table in xskxceiver.c to keep all the tests available
from the test_xsk.sh script.
selftests/bpf: test_xsk: Don't exit immediately on allocation failures
If any allocation in the pkt_stream_*() helpers fail, exit_with_error() is
called. This terminates the program immediately. It prevents the following
tests from running and isn't compliant with the CI.
Return NULL in case of allocation failure.
Return TEST_FAILURE when something goes wrong in the packet generation.
Clean up the resources if a failure happens between two steps of a test.
Move exit_with_error()'s definition into xskxceiver.c as it isn't used
anywhere else now.
selftests/bpf: test_xsk: Don't exit immediately if validate_traffic fails
__testapp_validate_traffic() calls exit_with_error() on failures. This
exits the program immediately. It prevents the following tests from
running and isn't compliant with the CI.
Return TEST_FAILURE instead of calling exit_with_error().
Release the resource of the 1st thread if a failure happens between its
creation and the creation of the second thread.
selftests/bpf: test_xsk: Don't exit immediately when workers fail
TX and RX workers can fail in many places. These failures trigger a call
to exit_with_error() which exits the program immediately. It prevents the
following tests from running and isn't compliant with the CI.
Add return value to functions that can fail.
Handle failures more smoothly through report_failure().
selftests/bpf: test_xsk: Don't exit immediately when gettimeofday fails
exit_with_error() is called when gettimeofday() fails. This exits the
program immediately. It prevents the following tests from being run and
isn't compliant with the CI.
Return TEST_FAILURE instead of calling exit_on_error().
selftests/bpf: test_xsk: Don't exit immediately when xsk_attach fails
xsk_reattach_xdp calls exit_with_error() on failures. This exits the
program immediately. It prevents the following tests from being run and
isn't compliant with the CI.
Add a return value to the functions handling XDP attachments to handle
errors more smoothly.
selftests/bpf: test_xsk: Add return value to init_iface()
init_iface() doesn't have any return value while it can fail. In case of
failure it calls exit_on_error() which exits the application
immediately. This prevents the following tests from being run and isn't
compliant with the CI
Add a return value to init_iface() so errors can be handled more
smoothly.
selftests/bpf: test_xsk: Release resources when swap fails
testapp_validate_traffic() doesn't release the sockets and the umem
created by the threads if the test isn't currently in its last step.
Thus, if the swap_xsk_resources() fails before the last step, the
created resources aren't cleaned up.
Clean the sockets and the umem in case of swap_xsk_resources() failure.
selftests/bpf: test_xsk: Wrap test clean-up in functions
The clean-up done at the end of a test in __testapp_validate_traffic()
isn't wrapped in a function. It isn't convenient if we want to use it
somewhere else in the code.
Wrap the clean-up in two new functions : the first deletes the sockets,
the second releases the umem.
selftests/bpf: test_xsk: fix memory leak in testapp_xdp_shared_umem()
testapp_xdp_shared_umem() generates pkt_stream on each xsk from xsk_arr,
where normally xsk_arr[0] gets pkt_streams and xsk_arr[1] have them NULLed.
At the end of the test pkt_stream_restore_default() only releases
xsk_arr[0] which leads to memory leaks.
Release the missing pkt_stream at the end of testapp_xdp_shared_umem()
selftests/bpf: test_xsk: fix memory leak in testapp_stats_rx_dropped()
testapp_stats_rx_dropped() generates pkt_stream twice. The last
generated is released by pkt_stream_restore_default() at the end of the
test but we lose the pointer of the first pkt_stream.
Release the 'middle' pkt_stream when it's getting replaced to prevent
memory leaks.
selftests/bpf: test_xsk: Fix __testapp_validate_traffic()'s return value
__testapp_validate_traffic is supposed to return an integer value that
tells if the test passed (0), failed (-1) or was skiped (2). It actually
returns a boolean in the end. This doesn't harm when the test is
successful but can lead to misinterpretation in case of failure as 1
will be returned instead of -1.
Return TEST_FAILURE (-1) in case of failure, TEST_PASS (0) otherwise.
AF_XDP features are tested by the test_xsk.sh script but not by the
test_progs framework. The tests used by the script are defined in
xksxceiver.c which can't be integrated in the test_progs framework as is.
Extract these test definitions from xskxceiver{.c/.h} to put them in new
test_xsk{.c/.h} files.
Keep the main() function and its unshared dependencies in xksxceiver to
avoid impacting the test_xsk.sh script which is often used to test real
hardware.
Move ksft_test_result_*() calls to xskxceiver.c to keep the kselftest's
report valid
Hans Holmberg [Fri, 31 Oct 2025 09:48:26 +0000 (10:48 +0100)]
null_blk: set dma alignment to logical block size
This driver assumes that bio vectors are memory aligned to the logical
block size, so set the queue limit to reflect that.
Unless we set up the limit based on the logical block size, we will go
out of page bounds in copy_to_nullb / copy_from_nullb.
Apparently this wasn't noticed so far because none of the tests generate
such buffers, but since commit 851c4c96db00 ("xfs: implement
XFS_IOC_DIOINFO in terms of vfs_getattr") xfstests generates unaligned
I/O, which now lead to memory corruption when using null_blk devices
with 4k block size.
Fixes: bf8d08532bc1 ("iomap: add support for dma aligned direct-io") Fixes: b1a000d3b8ec ("block: relax direct io memory alignment") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 31 Oct 2025 14:29:09 +0000 (07:29 -0700)]
Merge tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. It became slightly bigger than usual due
to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas
- A few HD-audio quirks, and USB-audio regression fixes for Presonus"
* tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/realtek: Enable mic on Vaio RPL
ASoC: dt-bindings: pm4125-sdw: correct number of soundwire ports
ASoC: renesas: rz-ssi: Use proper dma_buffer_pos after resume
ASoC: soc_sdw_utils: remove cs42l43 component_name
ASoC: fsl_sai: Fix sync error in consumer mode
ASoC: Fix build for sdw_utils
ALSA: hda/realtek: Fix mute led for HP Victus 15-fa1xxx (MB 8C2D)
ASoC: rt721: fix prepare clock stop failed
ALSA: usb-audio: don't log messages meant for 1810c when initializing 1824c
ASoC: mediatek: Fix double pm_runtime_disable in remove functions
ASoC: fsl_micfil: correct the endian format for DSD
ASoC: fsl_sai: fix bit order for DSD format
ASoC: Intel: avs: Use snd_codec format when initializing probe
ASoC: Intel: avs: Disable periods-elapsed work when closing PCM
ASoC: Intel: avs: Unprepare a stream when XRUN occurs
ASoC: sdw_utils: add name_prefix for rt1321 part id
ASoC: qdsp6: q6asm: do not sleep while atomic
ASoC: Intel: soc-acpi-intel-ptl-match: Remove cs42l43 match from sdw link3
ASOC: max98090/91: fix for filter configuration: AHPF removed DMIC2_HPF added
ASoC: amd: acp: Add ACP7.0 match entries for cs35l56 and cs42l43
...
Linus Torvalds [Fri, 31 Oct 2025 14:25:10 +0000 (07:25 -0700)]
Merge tag 'v6.18-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix double free in aspeed
- Fix req->nbytes clobbering in s390/phmac
* tag 'v6.18-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: aspeed - fix double free caused by devm
crypto: s390/phmac - Do not modify the req->nbytes value
Linus Torvalds [Fri, 31 Oct 2025 14:08:47 +0000 (07:08 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"ufs driver plus two core fixes.
One core fix makes the unit attention counters atomic (just in case
multiple commands detect them) and the other is fixing a merge window
regression caused by changes in the block tree"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Fix the unit attention counter implementation
scsi: ufs: core: Declare tx_lanes witout initialization
scsi: ufs: core: Initialize value of an attribute returned by uic cmd
scsi: ufs: core: Fix error handler host_sem issue
scsi: core: Fix a regression triggered by scsi_host_busy()
xfs: document another racy GC case in xfs_zoned_map_extent
Besides blocks being invalidated, there is another case when the original
mapping could have changed between querying the rmap for GC and calling
xfs_zoned_map_extent. Document it there as it took us quite some time
to figure out what is going on while developing the multiple-GC
protection fix.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
When we are picking a zone for gc it might already be in the pipeline
which can lead to us moving the same data twice resulting in in write
amplification and a very unfortunate case where we keep on garbage
collecting the zone we just filled with migrated data stopping all
forward progress.
Fix this by introducing a count of on-going GC operations on a zone, and
skip any zone with ongoing GC when picking a new victim.
Fixes: 080d01c41 ("xfs: implement zoned garbage collection") Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com> Co-developed-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Carlos Maiolino <cem@kernel.org>
Linus Torvalds [Fri, 31 Oct 2025 02:48:13 +0000 (19:48 -0700)]
Merge tag 'linux_kselftest-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fix build warning in cachestat found during clang build and add
tmpshmcstat to .gitignore"
* tag 'linux_kselftest-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: cachestat: Fix warning on declaration under label
selftests/cachestat: add tmpshmcstat file to .gitignore
Linus Torvalds [Fri, 31 Oct 2025 02:11:27 +0000 (19:11 -0700)]
Merge tag 'linux_kselftest-kunit-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"Fix log overwrite in param_tests and fixes incorrect cast of priv
pointer in test_dev_action().
Update email address for Rae Moar in MAINTAINERS KUnit entry"
* tag 'linux_kselftest-kunit-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
MAINTAINERS: Update KUnit email address for Rae Moar
kunit: prevent log overwrite in param_tests
kunit: test_dev_action: Correctly cast 'priv' pointer to long*
Linus Torvalds [Fri, 31 Oct 2025 02:05:46 +0000 (19:05 -0700)]
Merge tag 'acpi-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix three ACPI driver issues and add version checks to two ACPI
table parsers:
- Call input_free_device() on failing input device registration as
necessary (and mentioned in the input subsystem documentation) in
the ACPI button driver (Kaushlendra Kumar)
- Fix use-after-free in acpi_video_switch_brightness() by canceling a
delayed work during tear-down (Yuhao Jiang)
- Use platform device for devres-related actions in the ACPI fan
driver to allow device-managed resources to be cleaned up properly
(Armin Wolf)
- Add version checks to the MRRM and SPCR table parsers (Tony Luck
and Punit Agrawal)"
* tag 'acpi-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: SPCR: Check for table version when using precise baudrate
ACPI: MRRM: Check revision of MRRM table
ACPI: fan: Use platform device for devres-related actions
ACPI: fan: Use ACPI handle when retrieving _FST
ACPI: video: Fix use-after-free in acpi_video_switch_brightness()
ACPI: button: Call input_free_device() on failing input device registration
Linus Torvalds [Fri, 31 Oct 2025 02:02:16 +0000 (19:02 -0700)]
Merge tag 'pm-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three regressions, two recent ones and one introduced during
the 6.17 development cycle:
- Add an exit latency check to the menu cpuidle governor in the case
when it considers using a real idle state instead of a polling one
to address a performance regression (Rafael Wysocki)
- Revert an attempted cleanup of a system suspend code path that
introduced a regression elsewhere (Samuel Wu)
- Allow pm_restrict_gfp_mask() to be called multiple times in a row
and adjust pm_restore_gfp_mask() accordingly to avoid having to
play nasty games with these calls during hibernation (Rafael
Wysocki)"
* tag 'pm-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Allow pm_restrict_gfp_mask() stacking
cpuidle: governors: menu: Select polling state in some more cases
Revert "PM: sleep: Make pm_wakeup_clear() call more clear"
- fbcon: Fix slab-use-after-free in fb_mode_is_equal (Quanmin Yan)
- fb.h: Fix typo in "vertical" (Piyush Choudhary)
* tag 'fbdev-for-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: atyfb: Check if pll_ops->init_pll failed
fbcon: Set fb_display[i]->mode to NULL when the mode is released
fbdev: bitblit: bound-check glyph index in bit_putcs*
fbdev: pvr2fb: Fix leftover reference to ONCHIP_NR_DMA_CHANNELS
fbdev: valkyriefb: Fix reference count leak in valkyriefb_init
video: fb: Fix typo in comment in fb.h
drm/ast: Clear preserved bits from register output value
Preserve the I/O register bits in __ast_write8_i_masked() as specified
by preserve_mask. Accidentally OR-ing the output value into these will
overwrite the register's previous settings.
Fixes display output on the AST2300, where the screen can go blank at
boot. The driver's original commit 312fec1405dd ("drm: Initial KMS
driver for AST (ASpeed Technologies) 2000 series (v2)") already added
the broken code. Commit 6f719373b943 ("drm/ast: Blank with VGACR17 sync
enable, always clear VGACRB6 sync off") triggered the bug.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Peter Schneider <pschneider1968@googlemail.com> Closes: https://lore.kernel.org/dri-devel/a40caf8e-58ad-4f9c-af7f-54f6f69c29bb@googlemail.com/ Tested-by: Peter Schneider <pschneider1968@googlemail.com> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: 6f719373b943 ("drm/ast: Blank with VGACR17 sync enable, always clear VGACRB6 sync off") Fixes: 312fec1405dd ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Nick Bowler <nbowler@draconx.ca> Cc: Douglas Anderson <dianders@chromium.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.5+ Link: https://patch.msgid.link/20251024073626.129032-1-tzimmermann@suse.de
Merge branches 'acpi-button', 'acpi-video' and 'acpi-fan'
Merge ACPI button, ACPI backlight (video), and ACPI fan driver fixes for
6.18-rc4:
- Call input_free_device() on failing input device registration as
necessary (and mentioned in the input subsystem documentation) in the
ACPI button driver (Kaushlendra Kumar)
- Fix use-after-free in acpi_video_switch_brightness() by canceling
a delayed work during tear-down (Yuhao Jiang)
- Use platform device for devres-related actions in the ACPI fan driver
to allow device-managed resources to be cleaned up properly (Armin
Wolf)
Merge a cpuidle fix and two fixes related to system sleep for 6.18-rc4:
- Add an exit latency check to the menu cpuidle governor in the case
when it considers using a real idle state instead of a polling one to
address a performance regression (Rafael Wysocki)
- Revert an attempted cleanup of a system suspend code path that
introduced a regression elsewhere (Samuel Wu)
- Allow pm_restrict_gfp_mask() to be called multiple times in a row
and adjust pm_restore_gfp_mask() accordingly to avoid having to play
nasty games with these calls during hibernation (Rafael Wysocki)
* pm-cpuidle:
cpuidle: governors: menu: Select polling state in some more cases
* pm-sleep:
PM: sleep: Allow pm_restrict_gfp_mask() stacking
Revert "PM: sleep: Make pm_wakeup_clear() call more clear"
Heiko Carstens [Thu, 30 Oct 2025 14:55:05 +0000 (15:55 +0100)]
s390: Disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
As reported by Luiz Capitulino enabling HVO on s390 leads to reproducible
crashes. The problem is that kernel page tables are modified without
flushing corresponding TLB entries.
Even if it looks like the empty flush_tlb_all() implementation on s390 is
the problem, it is actually a different problem: on s390 it is not allowed
to replace an active/valid page table entry with another valid page table
entry without the detour over an invalid entry. A direct replacement may
lead to random crashes and/or data corruption.
In order to invalidate an entry special instructions have to be used
(e.g. ipte or idte). Alternatively there are also special instructions
available which allow to replace a valid entry with a different valid
entry (e.g. crdte or cspg).
Given that the HVO code currently does not provide the hooks to allow for
an implementation which is compliant with the s390 architecture
requirements, disable ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP again, which is
basically a revert of the original patch which enabled it.
Luca Ceresoli [Tue, 14 Oct 2025 11:30:51 +0000 (13:30 +0200)]
drm/imx: parallel-display: convert to devm_drm_bridge_alloc() API
This is the new API for allocating DRM bridges.
This conversion was missed during the initial conversion of all bridges to
the new API. Thus all kernels with commit 94d50c1a2ca3 ("drm/bridge:
get/put the bridge reference in drm_bridge_attach/detach()") and using this
driver now warn due to drm_bridge_attach() incrementing the refcount, which
is not initialized without using devm_drm_bridge_alloc() for allocation.
To make the conversion simple and straightforward without messing up with
the drmm_simple_encoder_alloc(), move the struct drm_bridge from struct
imx_parallel_display_encoder to struct imx_parallel_display.
Also remove the 'struct imx_parallel_display *pd' from struct
imx_parallel_display_encoder, not needed anymore.
Fixes: 94d50c1a2ca3 ("drm/bridge: get/put the bridge reference in drm_bridge_attach/detach()") Reported-by: Ernest Van Hoecke <ernestvanhoecke@gmail.com> Closes: https://lore.kernel.org/all/hlf4wdopapxnh4rekl5s3kvoi6egaga3lrjfbx6r223ar3txri@3ik53xw5idyh/ Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com> Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Link: https://patch.msgid.link/20251014-drm-bridge-alloc-imx-ipuv3-v1-1-a1bb1dcbff50@bootlin.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Takashi Iwai [Thu, 30 Oct 2025 12:08:08 +0000 (13:08 +0100)]
Merge tag 'asoc-fix-v6.18-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.18
A bigger batch of fixes than I'd like, things built up due to holidays
and some last minute issues which caused me to hold off on sending a pul
request. None of these are super remarkable, and there's a few new
device IDs in here too including a relatively big block of AMD devices.
The Cirrus Logic CS530x support subject line is actually a fix that was
on the start of that series and got pulled in here, I forgot to fix the
subject up when merging.
Maud Spierings [Thu, 30 Oct 2025 06:35:38 +0000 (07:35 +0100)]
regulator: bd718x7: Fix voltages scaled by resistor divider
The .min_sel and .max_sel fields remained uninitialized in the new
linear_range, causing an error further down the line. Copy the old
values of these fields to the new one as they represent the range of
register values, which does not change.
Fixes: d2ad981151b3a ("regulator: bd718x7: Support external connection to scale voltages") Signed-off-by: Maud Spierings <maudspierings@gocontroll.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/20251030-mini_iv-v3-2-ef56c4d9f219@gocontroll.com Signed-off-by: Mark Brown <broonie@kernel.org>
Ranganath V N [Sun, 26 Oct 2025 16:33:12 +0000 (22:03 +0530)]
net: sctp: fix KMSAN uninit-value in sctp_inq_pop
Fix an issue detected by syzbot:
KMSAN reported an uninitialized-value access in sctp_inq_pop
BUG: KMSAN: uninit-value in sctp_inq_pop
The issue is actually caused by skb trimming via sk_filter() in sctp_rcv().
In the reproducer, skb->len becomes 1 after sk_filter(), which bypassed the
original check:
if (skb->len < sizeof(struct sctphdr) + sizeof(struct sctp_chunkhdr) +
skb_transport_offset(skb))
To handle this safely, a new check should be performed after sk_filter().
Reported-by: syzbot+d101e12bccd4095460e7@syzkaller.appspotmail.com Tested-by: syzbot+d101e12bccd4095460e7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d101e12bccd4095460e7 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Ranganath V N <vnranganath.20@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20251026-kmsan_fix-v3-1-2634a409fa5f@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vaio RPL is equipped with ACL256, and needs a
fix to make the internal mic and headphone mic to work.
Also must to limits the internal microphone boost.
Shivaji Kant [Wed, 29 Oct 2025 06:54:19 +0000 (06:54 +0000)]
net: devmem: refresh devmem TX dst in case of route invalidation
The zero-copy Device Memory (Devmem) transmit path
relies on the socket's route cache (`dst_entry`) to
validate that the packet is being sent via the network
device to which the DMA buffer was bound.
However, this check incorrectly fails and returns `-ENODEV`
if the socket's route cache entry (`dst`) is merely missing
or expired (`dst == NULL`). This scenario is observed during
network events, such as when flow steering rules are deleted,
leading to a temporary route cache invalidation.
This patch fixes -ENODEV error for `net_devmem_get_binding()`
by doing the following:
1. It attempts to rebuild the route via `rebuild_header()`
if the route is initially missing (`dst == NULL`). This
allows the TCP/IP stack to recover from transient route
cache misses.
2. It uses `rcu_read_lock()` and `dst_dev_rcu()` to safely
access the network device pointer (`dst_dev`) from the
route, preventing use-after-free conditions if the
device is concurrently removed.
3. It maintains the critical safety check by validating
that the retrieved destination device (`dst_dev`) is
exactly the device registered in the Devmem binding
(`binding->dev`).
These changes prevent unnecessary ENODEV failures while
maintaining the critical safety requirement that the
Devmem resources are only used on the bound network device.
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com> Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: Vedant Mathur <vedantmathur@google.com> Suggested-by: Eric Dumazet <edumazet@google.com> Fixes: bd61848900bf ("net: devmem: Implement TX path") Signed-off-by: Shivaji Kant <shivajikant@google.com> Link: https://patch.msgid.link/20251029065420.3489943-1-shivajikant@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
net: stmmac: Fixes for stmmac Tx VLAN insert and EST
This patchset includes following fixes for stmmac Tx VLAN insert and
EST implementations:
1. Disable STAG insertion offloading, as DWMAC IPs doesn't support
offload of STAG for double VLAN packets and CTAG for single VLAN
packets when using the same register configuration. The current
configuration in the driver is undocumented and is adding an
additional 802.1Q tag with VLAN ID 0 for double VLAN packets.
2. Consider Tx VLAN offload tag length for maxSDU estimation.
3. Fix GCL bounds check
====================
Rohan G Thomas [Tue, 28 Oct 2025 03:18:45 +0000 (11:18 +0800)]
net: stmmac: est: Fix GCL bounds checks
Fix the bounds checks for the hw supported maximum GCL entry
count and gate interval time.
Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com> Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com> Link: https://patch.msgid.link/20251028-qbv-fixes-v4-3-26481c7634e3@altera.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rohan G Thomas [Tue, 28 Oct 2025 03:18:44 +0000 (11:18 +0800)]
net: stmmac: Consider Tx VLAN offload tag length for maxSDU
Queue maxSDU requirement of 802.1 Qbv standard requires mac to drop
packets that exceeds maxSDU length and maxSDU doesn't include
preamble, destination and source address, or FCS but includes
ethernet type and VLAN header.
On hardware with Tx VLAN offload enabled, VLAN header length is not
included in the skb->len, when Tx VLAN offload is requested. This
leads to incorrect length checks and allows transmission of
oversized packets. Add the VLAN_HLEN to the skb->len before checking
the Qbv maxSDU if Tx VLAN offload is requested for the packet.
Fixes: c5c3e1bfc9e0 ("net: stmmac: Offload queueMaxSDU from tc-taprio") Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com> Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com> Link: https://patch.msgid.link/20251028-qbv-fixes-v4-2-26481c7634e3@altera.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rohan G Thomas [Tue, 28 Oct 2025 03:18:43 +0000 (11:18 +0800)]
net: stmmac: vlan: Disable 802.1AD tag insertion offload
The DWMAC IP's VLAN tag insertion offload does not support inserting
STAG (802.1AD) and CTAG (802.1Q) types in bytes 13 and 14 using the
same MAC_VLAN_Incl and MAC_VLAN_Inner_Incl register configurations.
Currently, MAC_VLAN_Incl is configured to offload only STAG type
insertion. However, the DWMAC IP inserts a CTAG type when the inner
VLAN ID field of the descriptor is not configured, and a STAG type
when it is configured. This behavior is not documented and leads to
inconsistent double VLAN tagging.
Additionally, an unexpected CTAG with VLAN ID 0 is inserted, resulting
in frames like:
Frame 1: 110 bytes on wire (880 bits), 110 bytes captured (880 bits)
Ethernet II, Src: <src> (<src>), Dst: <dst> (<dst>)
IEEE 802.1ad, ID: 100
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 0 (unexpected)
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 200
Internet Protocol Version 4, Src: 192.168.4.10, Dst: 192.168.4.11
Internet Control Message Protocol
To avoid this undocumented and incorrect behavior, disable 802.1AD tag
insertion offload. Also, don't set CSVL bit. As per the data book,
when this bit is set, S-VLAN type (0x88A8) is inserted in the 13th and
14th bytes of transmitted packets and when this bit is reset, C-VLAN
type (0x8100) is inserted in the 13th and 14th bytes of transmitted
packets.
Fixes: 30d932279dc2 ("net: stmmac: Add support for VLAN Insertion Offload") Fixes: e94e3f3b51ce ("net: stmmac: Add support for VLAN Insertion Offload in GMAC4+") Fixes: 1d2c7a5fee31 ("net: stmmac: Refactor VLAN implementation") Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com> Reviewed-by: Boon Khai Ng <boon.khai.ng@altera.com> Link: https://patch.msgid.link/20251028-qbv-fixes-v4-1-26481c7634e3@altera.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
tls: Introduce and use RX async resync request cancel function
This series by Shahar introduces RX async resync request cancel function
in tls module, and uses it in mlx5e driver.
For a device-offloaded TLS RX connection, the TLS module increments
rcd_delta each time a new TLS record is received, tracking the distance
from the original resync request. In the meanwhile, the device is
queried and is expected to respond, asynchronously.
However, if the device response is delayed or fails (e.g due to unstable
connection and device getting out of tracking, hardware errors, resource
exhaustion etc.), the TLS module keeps logging and incrementing
rcd_delta, which can lead to a WARN() when rcd_delta exceeds the
threshold.
This series improves this code area by canceling the resync request when
spotting an issue with the device response.
====================
Shahar Shitrit [Sun, 26 Oct 2025 20:03:03 +0000 (22:03 +0200)]
net/mlx5e: kTLS, Cancel RX async resync request in error flows
When device loses track of TLS records, it attempts to resync by
monitoring records and requests an asynchronous resynchronization
from software for this TLS connection.
The TLS module handles such device RX resync requests by logging record
headers and comparing them with the record tcp_sn when provided by the
device. It also increments rcd_delta to track how far the current
record tcp_sn is from the tcp_sn of the original resync request.
If the device later responds with a matching tcp_sn, the TLS module
approves the tcp_sn for resync.
However, the device response may be delayed or never arrive,
particularly due to traffic-related issues such as packet drops or
reordering. In such cases, the TLS module remains unaware that resync
will not complete, and continues performing unnecessary work by logging
headers and incrementing rcd_delta, which can eventually exceed the
threshold and trigger a WARN(). For example, this was observed when the
device got out of tracking, causing
mlx5e_ktls_handle_get_psv_completion() to fail and ultimately leading
to the rcd_delta warning.
To address this, call tls_offload_rx_resync_async_request_cancel()
to cancel the resync request and stop resync tracking in such error
cases. Also, increment the tls_resync_req_skip counter to track these
cancellations.
Shahar Shitrit [Sun, 26 Oct 2025 20:03:02 +0000 (22:03 +0200)]
net: tls: Cancel RX async resync request on rcd_delta overflow
When a netdev issues a RX async resync request for a TLS connection,
the TLS module handles it by logging record headers and attempting to
match them to the tcp_sn provided by the device. If a match is found,
the TLS module approves the tcp_sn for resynchronization.
While waiting for a device response, the TLS module also increments
rcd_delta each time a new TLS record is received, tracking the distance
from the original resync request.
However, if the device response is delayed or fails (e.g due to
unstable connection and device getting out of tracking, hardware
errors, resource exhaustion etc.), the TLS module keeps logging and
incrementing, which can lead to a WARN() when rcd_delta exceeds the
threshold.
To address this, introduce tls_offload_rx_resync_async_request_cancel()
to explicitly cancel resync requests when a device response failure is
detected. Call this helper also as a final safeguard when rcd_delta
crosses its threshold, as reaching this point implies that earlier
cancellation did not occur.
Shahar Shitrit [Sun, 26 Oct 2025 20:03:01 +0000 (22:03 +0200)]
net: tls: Change async resync helpers argument
Update tls_offload_rx_resync_async_request_start() and
tls_offload_rx_resync_async_request_end() to get a struct
tls_offload_resync_async parameter directly, rather than
extracting it from struct sock.
This change aligns the function signatures with the upcoming
tls_offload_rx_resync_async_request_cancel() helper, which
will be introduced in a subsequent patch.
Jakub Kicinski [Thu, 30 Oct 2025 01:25:12 +0000 (18:25 -0700)]
Merge tag 'nf-25-10-29' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
1) its not possible to attach conntrack labels via ctnetlink
unless one creates a dummy 'ct labels set' rule in nftables.
This is an oversight, the 'ruleset tests presence, userspace
(netlink) sets' use-case is valid and should 'just work'.
Always broken since this got added in Linux 4.7.
2) nft_connlimit reads count value without holding the relevant
lock, add a READ_ONCE annotation. From Fernando Fernandez Mancera.
3) There is a long-standing bug (since 4.12) in nftables helper infra
when NAT is in use: if the helper gets assigned after the nat binding
was set up, we fail to initialise the 'seqadj' extension, which is
needed in case NAT payload rewrites need to add (or remove) from the
packet payload. Fix from Andrii Melnychenko.
* tag 'nf-25-10-29' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_ct: add seqadj extension for natted connections
netfilter: nft_connlimit: fix possible data race on connection count
netfilter: nft_ct: enable labels for get case too
====================
Puranjay Mohan [Thu, 23 Oct 2025 16:14:44 +0000 (16:14 +0000)]
bpf: Use kmalloc_nolock() in bpf streams
BPF stream kfuncs need to be non-sleeping as they can be called from
programs running in any context, this requires a way to allocate memory
from any context. Currently, this is done by a custom per-CPU NMI-safe
bump allocation mechanism, backed by alloc_pages_nolock() and
free_pages_nolock() primitives.
As kmalloc_nolock() and kfree_nolock() primitives are available now, the
custom allocator can be removed in favor of these.
A couple of changes for rqspinlock, the first disables propagation of AA
and ABBA deadlocks to waiters succeeding the deadlocking waiter. A more
verbose rationale is available in the commit log. The second commit
expands the stress test to introduce a ABBCCA mode that will reliably
exercise the timeout fallback.
====================
selftests/bpf: Add ABBCCA case for rqspinlock stress test
Introduce a new mode for the rqspinlock stress test that exercises a
deadlock that won't be detected by the AA and ABBA checks, such that we
always reliably trigger the timeout fallback. We need 4 CPUs for this
particular case, as CPU 0 is untouched, and three participant CPUs for
triggering the ABBCCA case.
Refactor the lock acquisition paths in the module to better reflect the
three modes and choose the right lock depending on the context.
Also drop ABBA case from running by default as part of test progs, since
the stress test can consume a significant amount of time.
rqspinlock: Disable queue destruction for deadlocks
Disable propagation and unwinding of the waiter queue in case the head
waiter detects a deadlock condition, but keep it enabled in case of the
timeout fallback.
Currently, when the head waiter experiences an AA deadlock, it will
signal all its successors in the queue to exit with an error. This is
not ideal for cases where the same lock is held in contexts which can
cause errors in an unrestricted fashion (e.g., BPF programs, or kernel
paths invoked through BPF programs), and core kernel logic which is
written in a correct fashion and does not expect deadlocks.
The same reasoning can be extended to ABBA situations. Depending on the
actual runtime schedule, one or both of the head waiters involved in an
ABBA situation can detect and exit directly without terminating their
waiter queue. If the ABBA situation manifests again, the waiters will
keep exiting until progress can be made, or a timeout is triggered in
case of more complicated locking dependencies.
We still preserve the queue destruction in case of timeouts, as either
the locking dependencies are too complex to be captured by AA and ABBA
heuristics, or the owner is perpetually stuck. As such, it would be
unwise to continue to apply the timeout for each new head waiter without
terminating the queue, since we may end up waiting for more than 250 ms
in aggregate with all participants in the locking transaction.
The patch itself is fairly simple; we can simply signal our successor to
become the next head waiter, and leave the queue without attempting to
acquire the lock.
With this change, the behavior for waiters in case of deadlocks
experienced by a predecessor changes. It is guaranteed that call sites
will no longer receive errors if the predecessors encounter deadlocks
and the successors do not participate in one. This should lower the
failure rate for waiters that are not doing improper locking opreations,
just because they were unlucky to queue behind a misbehaving waiter.
However, timeouts are still a possibility, hence they must be accounted
for, so users cannot rely upon errors not occuring at all.
Mykyta Yatsenko [Wed, 29 Oct 2025 19:59:07 +0000 (19:59 +0000)]
selftests/bpf: Fix intermittent failures in file_reader test
file_reader/on_open_expect_fault intermittently fails when test_progs
runs tests in parallel, because it expects a page fault on first read.
Another file_reader test running concurrently may have already pulled
the same pages into the page cache, eliminating the fault and causing a
spurious failure.
Make file_reader/on_open_expect_fault read from a file region that does
not overlap with other file_reader tests, so the initial access still
faults even under parallel execution.
projects / thirdparty / linux.git / log
