arm64: dts: qcom: sa8295p-adp: Enable the four USB Type-A ports
The multiport USB controller in the SA8295P ADP is connected to four USB
Type-A ports. VBUS for each of these ports are provided by a
TPS2559QWDRCTQ1 regulator, controlled from PMIC GPIOs.
Add the necessary regulators and GPIO configuration to power these.
It seems reasonable that these regulators should be referenced as vbus
supply of usb-a-connector nodes and controlled by e.g. dwc3, but as this
is not supported in Linux today the regulators are left always-on for
now.
arm64: dts: x1e80100-qcp: fix wsa soundwire port mapping
Existing way of allocating ports dynamically is linear starting from 1 to
MAX_PORTS. This will not work for x1e80100 as the master ports are
are not mapped in the same order.
Without this fix only one speaker in a pair of speakers will function.
After this fix along with WSA codec changes both the speakers starts
working.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240626-port-map-v2-6-6cc1c5608cdd@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
arm64: dts: x1e80100-crd: fix wsa soundwire port mapping
Existing way of allocating ports dynamically is linear starting from 1 to
MAX_PORTS. This will not work for x1e80100 as the master ports are
are not mapped in the same order.
Without this fix only one speaker in a pair of speakers will function.
After this fix along with WSA codec changes both the speakers starts
working.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240626-port-map-v2-5-6cc1c5608cdd@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
arm64: dts: qcom: sm8550: add description of CCI controllers
Qualcomm SM8550 SoC contains 3 Camera Control Interface controllers
very similar to the ones found on other Qualcomm SoCs.
One noticeable difference is that cci@ac16000 controller provides only
one I2C bus and has an additional control over AON CCI pins gpio208
and gpio209, but this feature is not yet supported in the CCI driver.
arm64: dts: qcom: sm8650-qrd: use the PMU to power up bluetooth
Change the HW model in sm8650-qrd.dts to a one closer to reality - where
the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
inside the package.
Bjorn Andersson [Thu, 1 Aug 2024 03:07:40 +0000 (22:07 -0500)]
Merge branch '20240717-dispcc-sm8550-fixes-v2-7-5c4a3128c40b@linaro.org' into arm64-for-6.12
Merge the SM8550/SM8650 display clock controller binding header file
merge through a topic branch, to ensure the bindings are kept in sync
between clock and DeviceTree source branches.
dt-bindings: clock: qcom,sm8650-dispcc: replace with symlink
The display clock controller indices for SM8650 and SM8550 are
completely equal. Replace the header file for qcom,sm8650-dispcc with
the symlink to the qcom,sm8550-dispcc header file.
Add pm8950 resin node as a feature of the PMIC it should be declared
in pm8950.dtsi, disabled by default. Like all other optional components
it can then by enabled and configured in the board-specific device tree
part.
Add initial device-tree for Lenovo A6000 (wt86518) and Lenovo A6010
(wt86528), which are MSM8916-based devices. These devices are quite
similar, so some configuration is shared in msm8916-wingtech-wt865x8.dtsi.
Lenovo A6000 (wt86518):
- storage (eMMC and uSD card);
- usb in peripheral mode;
- touchscreen;
- sensors;
- WiFi/BT;
- keys;
- battery and charger.
Lenovo A6010 (wt86528):
- storage (eMMC and uSD card);
- usb with extcon;
- touchscreen;
- sensors;
- WiFi/BT;
- keys;
- leds;
- battery;
Signed-off-by: Anton Bambura <jenneron@postmarketos.org> Co-developed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Nikita: minor cleanup] Signed-off-by: Nikita Travkin <nikita@trvn.ru> Link: https://lore.kernel.org/r/20240729-msm89xx-wingtech-init-v3-2-32c35476f098@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org>
dt-bindings: arm: qcom: Add msm8916/39 based Lenovo devices
Add compaitble values for some variants of Lenovo A6000/A6010/A6020
devices. These devices are based on designs from Wingtech so use it's
vendor prefix and part numbers for compatibles.
arm64: dts: qcom: msm8992-lg-h815: Initial support for LG G4 (H815)
To make it easier for downstream projects and avoid duplication of work.
Makes the device bootable and enables all buttons, hall sensor, eMMC and SD-Card.
Johan Hovold [Mon, 22 Jul 2024 09:54:57 +0000 (11:54 +0200)]
arm64: dts: qcom: x1e80100-yoga-slim7x: fix up PCIe6a pinctrl node
The PCIe6a pinctrl node appears to have been copied from the sc8280xp
CRD dts (via the x1e80100 CRD dts), which has the NVMe on pcie2a and
uses some funny indentation.
Fix up the node name to match the x1e80100 use and label and use only
tabs for indentation.
Add the missing PCIe4 perst, wake and clkreq GPIOs and pin config.
Fixes: d0e2f8f62dff ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240722095459.27437-9-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PCIe4 PHY is powered by vreg_l3i (not vreg_l3j) on the CRD reference
design so assume the same applies to the Asus Vivobook S15.
Fixes: d0e2f8f62dff ("arm64: dts: qcom: Add device tree for ASUS Vivobook S 15") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240722095459.27437-6-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Johan Hovold [Mon, 22 Jul 2024 09:42:44 +0000 (11:42 +0200)]
arm64: dts: qcom: x1e80100: add missing PCIe minimum OPP
Add the missing PCIe CX performance level votes to avoid relying on
other drivers (e.g. USB) to maintain the nominal performance level
required for Gen3 speeds.
arm64: dts: qcom: ipq5332: Fix interrupt trigger type for usb
Trigger type is incorrectly specified as IRQ_TYPE_EDGE_BOTH
instead of IRQ_TYPE_LEVEL_HIGH. This trigger type is not
supported for SPIs and results in probe failure with -EINVAL.
Neil Armstrong [Tue, 16 Jul 2024 09:45:11 +0000 (11:45 +0200)]
arm64: dts: qcom: sm8550-qrd: use the PMU to power up bluetooth
Change the HW model in sm8550-qrd.dts to a one closer to reality - where
the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
inside the package.
Neil Armstrong [Tue, 16 Jul 2024 09:45:10 +0000 (11:45 +0200)]
arm64: dts: qcom: sm8650-hdk: use the PMU to power up bluetooth
Change the HW model in sm8650-hdk.dts to a one closer to reality - where
the WLAN and Bluetooth modules of the WCN7850 are powered by the PMU
inside the package.
Stephan Gerhold [Wed, 10 Jul 2024 08:18:20 +0000 (10:18 +0200)]
arm64: dts: qcom: x1e80100-crd: Add LID switch
Add gpio-keys for exposing the LID switch state, similar to
sc8280xp-lenovo-thinkpad-x13s.dts. Only the GPIO number is different.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Tested-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240710-x1e80100-crd-lid-v1-1-0156e8a62af6@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
minmax: simplify and clarify min_t()/max_t() implementation
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
kbuild: Fix '-S -c' in x86 stack protector scripts
After a recent change in clang to stop consuming all instances of '-S'
and '-c' [1], the stack protector scripts break due to the kernel's use
of -Werror=unused-command-line-argument to catch cases where flags are
not being properly consumed by the compiler driver:
$ echo | clang -o - -x c - -S -c -Werror=unused-command-line-argument
clang: error: argument unused during compilation: '-c' [-Werror,-Wunused-command-line-argument]
This results in CONFIG_STACKPROTECTOR getting disabled because
CONFIG_CC_HAS_SANE_STACKPROTECTOR is no longer set.
'-c' and '-S' both instruct the compiler to stop at different stages of
the pipeline ('-S' after compiling, '-c' after assembling), so having
them present together in the same command makes little sense. In this
case, the test wants to stop before assembling because it is looking at
the textual assembly output of the compiler for either '%fs' or '%gs',
so remove '-c' from the list of arguments to resolve the error.
All versions of GCC continue to work after this change, along with
versions of clang that do or do not contain the change mentioned above.
Cc: stable@vger.kernel.org Fixes: 4f7fd4d7a791 ("[PATCH] Add the -fstack-protector option to the CFLAGS") Fixes: 60a5317ff0f4 ("x86: implement x86_32 stack protector") Link: https://github.com/llvm/llvm-project/commit/6461e537815f7fa68cef06842505353cf5600e9c Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Enable turbostat extensions to add both perf and PMT (Intel
Platform Monitoring Technology) counters via the cmdline
- Demonstrate PMT access with built-in support for Meteor Lake's
Die C6 counter
* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.07.26
tools/power turbostat: Include umask=%x in perf counter's config
tools/power turbostat: Document PMT in turbostat.8
tools/power turbostat: Add MTL's PMT DC6 builtin counter
tools/power turbostat: Add early support for PMT counters
tools/power turbostat: Add selftests for added perf counters
tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
tools/power turbostat: Move verbose counter messages to level 2
tools/power turbostat: Move debug prints from stdout to stderr
tools/power turbostat: Fix typo in turbostat.8
tools/power turbostat: Add perf added counter example to turbostat.8
tools/power turbostat: Fix formatting in turbostat.8
tools/power turbostat: Extend --add option with perf counters
tools/power turbostat: Group SMI counter with APERF and MPERF
tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
tools/power turbostat: Remove anonymous union from rapl_counter_info_t
tools/power/turbostat: Switch to new Intel CPU model defines
Merge tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"Core:
- A CXL maturity map has been added to the documentation to detail
the current state of CXL enabling.
It provides the status of the current state of various CXL features
to inform current and future contributors of where things are and
which areas need contribution.
- A notifier handler has been added in order for a newly created CXL
memory region to trigger the abstract distance metrics calculation.
This should bring parity for CXL memory to the same level vs
hotplugged DRAM for NUMA abstract distance calculation. The
abstract distance reflects relative performance used for memory
tiering handling.
- An addition for XOR math has been added to address the CXL DPA to
SPA translation.
CXL address translation did not support address interleave math
with XOR prior to this change.
Fixes:
- Fix to address race condition in the CXL memory hotplug notifier
- Add missing MODULE_DESCRIPTION() for CXL modules
- Fix incorrect vendor debug UUID define
Misc:
- A warning has been added to inform users of an unsupported
configuration when mixing CXL VH and RCH/RCD hierarchies
- The ENXIO error code has been replaced with EBUSY for inject poison
limit reached via debugfs and cxl-test support
- Moving the PCI config read in cxl_dvsec_rr_decode() to avoid
unnecessary PCI config reads
- A refactor to a common struct for DRAM and general media CXL
events"
* tag 'cxl-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/pci: Move reading of control register to immediately before usage
cxl: Remove defunct code calculating host bridge target positions
cxl/region: Verify target positions using the ordered target list
cxl: Restore XOR'd position bits during address translation
cxl/core: Fold cxl_trace_hpa() into cxl_dpa_to_hpa()
cxl/test: Replace ENXIO with EBUSY for inject poison limit reached
cxl/memdev: Replace ENXIO with EBUSY for inject poison limit reached
cxl/acpi: Warn on mixed CXL VH and RCH/RCD Hierarchy
cxl/core: Fix incorrect vendor debug UUID define
Documentation: CXL Maturity Map
cxl/region: Simplify cxl_region_nid()
cxl/region: Support to calculate memory tier abstract distance
cxl/region: Fix a race condition in memory hotplug notifier
cxl: add missing MODULE_DESCRIPTION() macros
cxl/events: Use a common struct for DRAM and General Media events
Merge tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode update from Gabriel Krisman Bertazi:
"Two small fixes to silence the compiler and static analyzers tools
from Ben Dooks and Jeff Johnson"
* tag 'unicode-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: add MODULE_DESCRIPTION() macros
unicode: make utf8 test count static
In the same way as for other similar files, mark as ghost the new file
generated by depmod for configured weak dependencies for modules,
modules.weakdep, so that although it is not included in the package,
claim the ownership on it.
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix for potential null pointer use in init cifs
- additional dynamic trace points to improve debugging of some common
scenarios
- two SMB1 fixes (one addressing reconnect with POSIX extensions, one a
mount parsing error)
* tag '6.11-rc-smb-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: add dynamic trace point for session setup key expired failures
smb3: add four dynamic tracepoints for copy_file_range and reflink
smb3: add dynamic tracepoint for reflink errors
cifs: mount with "unix" mount option for SMB1 incorrectly handled
cifs: fix reconnect with SMB1 UNIX Extensions
cifs: fix potential null pointer use in destroy_workqueue in init_cifs error path
Merge tag 'block-6.11-20240726' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix request without payloads cleanup (Leon)
- Use new protection information format (Francis)
- Improved debug message for lost pci link (Bart)
- Another apst quirk (Wang)
- Use appropriate sysfs api for printing chars (Markus)
- ublk async device deletion fix (Ming)
- drbd kerneldoc fixups (Simon)
- Fix deadlock between sd removal and release (Yang)
* tag 'block-6.11-20240726' of git://git.kernel.dk/linux:
nvme-pci: add missing condition check for existence of mapped data
ublk: fix UBLK_CMD_DEL_DEV_ASYNC handling
block: fix deadlock between sd_remove & sd_release
drbd: Add peer_device to Kernel doc
nvme-core: choose PIF from QPIF if QPIFS supports and PIF is QTYPE
nvme-pci: Fix the instructions for disabling power management
nvme: remove redundant bdev local variable
nvme-fabrics: Use seq_putc() in __nvmf_concat_opt_tokens()
nvme/pci: Add APST quirk for Lenovo N60z laptop
projects / thirdparty / kernel / linux.git / log
