Add struct scarlett2_config_set so that data which is common to all
devices in a config set can be stored there rather than in the
model-specific data.
Accordingly, rename scarlett2_config_items[] to
scarlett2_config_sets[].
ALSA: scarlett2: Check presence of mixer using mux_assignment
Currently the presence of a mixer is determined by checking if the
device uses the GEN_3A config set. Add scarlett2_has_mixer() function
which checks for the presence of mux_assignment entries instead.
ALSA: scarlett2: Infer standalone switch from config items
Rather than assuming the standalone switch is present for all devices
with a mixer, instead check for the presence of the
SCARLETT2_CONFIG_STANDALONE_SWITCH config item.
ALSA: scarlett2: Infer has_msd_mode from config items
Rather than storing has_msd_mode in the per-device structure, infer
this from the presence of the SCARLETT2_CONFIG_MSD_SWITCH entry in the
device's configuration set.
ALSA: scarlett2: Simplify enums by removing explicit values
This commit removes the explicit integer assignments from the enums.
The actual values matter little, and not assigning explicit values
makes it easier to modify the longer lists in the future.
ALSA: scarlett2: Add support for uploading new firmware
Add ops.write to the hwdep interface. Once the upgrade firmware flash
segment has been erased, writes to the hwdep fd are permitted, and
translated to SCARLETT2_USB_WRITE_SEGMENT commands to the device.
Call SCARLETT2_USB_INFO_FLASH and SCARLETT2_USB_INFO_SEGMENT to find
the App_Settings and App_Upgrade flash segment numbers, and store them
in the scarlett2_data struct. These will be used later to implement
reset to factory defaults and firmware upgrade functions.
ALSA: scarlett2: Add clamp() in scarlett2_mixer_ctl_put()
Ensure the value passed to scarlett2_mixer_ctl_put() is between 0 and
SCARLETT2_MIXER_MAX_VALUE so we don't attempt to access outside
scarlett2_mixer_values[].
ALSA: scarlett2: Add missing error check to scarlett2_usb_set_config()
scarlett2_usb_set_config() calls scarlett2_usb_get() but was not
checking the result. Return the error if it fails rather than
continuing with an invalid value.
ALSA: scarlett2: Add missing error check to scarlett2_config_save()
scarlett2_config_save() was ignoring the return value from
scarlett2_usb(). As this function is not called from user-space we
can't return the error, so call usb_audio_err() instead.
Gergo Koteles [Thu, 21 Dec 2023 23:48:56 +0000 (00:48 +0100)]
ALSA: hda/tas2781: do not use regcache
There are two problems with using regcache in this module.
The amplifier has 3 addressing levels (BOOK, PAGE, REG). The firmware
contains blocks that must be written to BOOK 0x8C. The regcache doesn't
know anything about BOOK, so regcache_sync writes invalid values to the
actual BOOK.
The module handles 2 or more separate amplifiers. The amplifiers have
different register values, and the module uses only one regmap/regcache
for all the amplifiers. The regcache_sync only writes the last amplifier
used.
The module successfully restores all the written register values (RC
profile, program, configuration, calibration) without regcache.
Remove regcache functions and set regmap cache_type to REGCACHE_NONE.
Takashi Iwai [Thu, 21 Dec 2023 08:22:47 +0000 (09:22 +0100)]
Merge tag 'asoc-fix-v6.7-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
Quite a big collection of fixes, as ever mostly in drivers. There's one
framework fix for the HDMI CODEC where it wasn't handling startup
properly for some controllers, and one new x86 quirk, but otherwise all
local fixes or dropping things we don't want to see in a release.
Shengjiu Wang [Tue, 19 Dec 2023 02:30:57 +0000 (10:30 +0800)]
ASoC: fsl_sai: Fix channel swap issue on i.MX8MP
When flag mclk_with_tere and mclk_direction_output enabled,
The SAI transmitter or receiver will be enabled in very early
stage, that if FSL_SAI_xMR is set by previous case,
for example previous case is one channel, current case is
two channels, then current case started with wrong xMR in
the beginning, then channel swap happen.
The patch is to clear xMR in hw_free() to avoid such
channel swap issue.
Fixes: 3e4a82612998 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://msgid.link/r/1702953057-4499-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Stefan Binding [Mon, 18 Dec 2023 15:12:21 +0000 (15:12 +0000)]
ALSA: hda/realtek: Add quirks for ASUS Zenbook 2023 Models
These models use 2xCS35L41amps with HDA using SPI and I2C.
Models use internal and external boost.
All models require DSD support to be added inside
cs35l41_hda_property.c
Stefan Binding [Mon, 18 Dec 2023 15:12:19 +0000 (15:12 +0000)]
ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models
These models use 2xCS35L41amps with HDA using SPI and I2C.
Models use internal and external boost.
All models require DSD support to be added inside
cs35l41_hda_property.c
Stefan Binding [Mon, 18 Dec 2023 15:12:17 +0000 (15:12 +0000)]
ALSA: hda/realtek: Add quirks for ASUS ROG 2023 models
These models use 2xCS35L41amps with HDA using SPI and I2C.
All models use Internal Boost.
Some models also use Realtek Speakers in conjunction with
CS35L41.
All models require DSD support to be added inside
cs35l41_hda_property.c
Hans de Goede [Sun, 17 Dec 2023 21:32:21 +0000 (22:32 +0100)]
ASoC: Intel: bytcr_rt5640: Add new swapped-speakers quirk
Some BYTCR x86 tablets with a rt5640 codec have the left and right channels
of their speakers swapped.
Add a new BYT_RT5640_SWAPPED_SPEAKERS quirk for this which sets
cfg-spk:swapped in the components string to let userspace know
about the swapping so that the UCM profile can configure the mixer
to correct this.
Enable this new quirk on the Medion Lifetab S10346 which has its
speakers swapped.
Hans de Goede [Sun, 17 Dec 2023 21:32:20 +0000 (22:32 +0100)]
ASoC: Intel: bytcr_rt5640: Add quirk for the Medion Lifetab S10346
Add a quirk for the Medion Lifetab S10346, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
Jeremie Knuesel [Sun, 17 Dec 2023 11:22:43 +0000 (12:22 +0100)]
ALSA: usb-audio: Increase delay in MOTU M quirk
Increase the quirk delay from 2 seconds to 4 seconds. This reflects a
change in the Windows driver in which the delay was increased to about
3.7 seconds. The larger delay fixes an issue where the device fails to
work unless it was powered up early during boot.
Also clarify in the quirk comment that the quirk is only applied to
older devices (USB ID 07fd:0008).
Gergo Koteles [Thu, 14 Dec 2023 23:33:27 +0000 (00:33 +0100)]
ALSA: hda/tas2781: select program 0, conf 0 by default
Currently, cur_prog/cur_conf remains at the default value (-1), while
program 0 has been loaded into the amplifiers.
In the playback hook, tasdevice_tuning_switch tries to restore the
cur_prog/cur_conf. In the runtime_resume/system_resume,
tasdevice_prmg_load tries to load the cur_prog as well.
Set cur_prog and cur_conf to 0 if available in the firmware.
Gergo Koteles [Wed, 13 Dec 2023 23:49:20 +0000 (00:49 +0100)]
ALSA: hda/tas2781: reset the amp before component_add
Calling component_add starts loading the firmware, the callback function
writes the program to the amplifiers. If the module resets the
amplifiers after component_add, it happens that one of the amplifiers
does not work because the reset and program writing are interleaving.
Call tas2781_reset before component_add to ensure reliable
initialization.
Gergo Koteles [Wed, 13 Dec 2023 23:28:16 +0000 (00:28 +0100)]
ALSA: hda/tas2781: call cleanup functions only once
If the module can load the RCA but not the firmware binary, it will call
the cleanup functions. Then unloading the module causes general
protection fault due to double free.
Do not call the cleanup functions in tasdev_fw_ready.
Charles Keepax [Mon, 11 Dec 2023 16:00:18 +0000 (16:00 +0000)]
ASoC: cs42l43: Don't enable bias sense during type detect
Alas on some headsets the bias sense can cause problems with the
type detection. It can occasionally be falsely triggered by the type
detect itself and as the clamp is applied when this happens, it will
cause a headset to be incorrectly identified as headphones. As
such it should be disabled whilst running type detect. This does
mean a jack removal during type detect will cause a larger click
but that is unfortunately unavoidable.
ASoC: Intel: soc-acpi-intel-mtl-match: Change CS35L56 prefixes to AMPn
Change the ALSA prefix for the CS35L56 to "AMPn".
This keeps them consistent with the CS35L56 HDA driver. It also
avoids coding the chip ID into the control name, so that other
Cirrus amps with the same controls can have the same control
names.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 05fe62842804 ("ASoC: Intel: soc-acpi-intel-mtl-match: add acpi match table for cdb35l56-eight-c") Link: https://msgid.link/r/20231205115715.2460386-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Gergo Koteles [Sun, 10 Dec 2023 23:37:33 +0000 (00:37 +0100)]
ALSA: hda/tas2781: handle missing EFI calibration data
The code does not properly check whether the calibration variable is
available in the EFI. If it is not available, it causes a NULL pointer
dereference.
Check the return value of the first get_variable call also.
Hartmut Knaack [Sat, 9 Dec 2023 14:47:07 +0000 (15:47 +0100)]
ALSA: hda/realtek: Apply mute LED quirk for HP15-db
The HP laptop 15-db0403ng uses the ALC236 codec and controls the mute
LED using COEF 0x07 index 1.
Sound card subsystem: Hewlett-Packard Company Device [103c:84ae]
Kai Vehmanen [Fri, 8 Dec 2023 13:21:27 +0000 (15:21 +0200)]
ALSA: hda/hdmi: add force-connect quirks for ASUSTeK Z170 variants
On ASUSTeK Z170M PLUS and Z170 PRO GAMING systems, the display codec
pins are not registered properly without the force-connect quirk. The
codec will report only one pin as having external connectivity, but i915
finds all three connectors on the system, so the two drivers are not
in sync.
Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio.
Kai Vehmanen [Fri, 8 Dec 2023 13:21:26 +0000 (15:21 +0200)]
ALSA: hda/hdmi: add force-connect quirk for NUC5CPYB
Add one more older NUC model that requires quirk to force all pins to be
connected. The display codec pins are not registered properly without
the force-connect quirk. The codec will report only one pin as having
external connectivity, but i915 finds all three connectors on the
system, so the two drivers are not in sync.
Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio.
Ivan Orlov [Wed, 6 Dec 2023 22:32:11 +0000 (22:32 +0000)]
ALSA: pcmtest: stop timer before buffer is released
Stop timer in the 'trigger' and 'sync_stop' callbacks since we want
the timer to be stopped before the DMA buffer is released. Otherwise,
it could trigger a kernel panic in some circumstances, for instance
when the DMA buffer is already released but the timer callback is
still running.
ASoC: cs35l45: Prevents spinning during runtime suspend
Masks the "DSP Virtual Mailbox 2 write" interrupt when before
issuing the hibernate command to the DSP. The interrupt is
unmasked when exiting runtime suspend as it is required for
DSP operation.
Without this change the DSP fires an interrupt when hibernating
causing the system spin between runtime suspend and runtime
resume.
Make use of the recently introduced EXPORT_GPL_DEV_PM_OPS() macro, to
conditionally export the runtime/system PM functions.
Replace the old SET_{RUNTIME,SYSTEM_SLEEP,NOIRQ_SYSTEM_SLEEP}_PM_OPS()
helpers with their modern alternatives and get rid of the now
unnecessary '__maybe_unused' annotations on all PM functions.
Additionally, use the pm_ptr() macro to fix the following errors when
building with CONFIG_PM disabled:
Tim Bosse [Wed, 6 Dec 2023 14:26:29 +0000 (09:26 -0500)]
ALSA: hda/realtek: add new Framework laptop to quirks
The Framework Laptop 13 (AMD Ryzen 7040Series) has an ALC295 with
a disconnected or faulty headset mic presence detect similar to the
previous models. It works with the same quirk chain as 309d7363ca3d9fcdb92ff2d958be14d7e8707f68. This model has a VID:PID
of f111:0006.
Jason Zhang [Wed, 6 Dec 2023 01:31:39 +0000 (09:31 +0800)]
ALSA: pcm: fix out-of-bounds in snd_pcm_state_names
The pcm state can be SNDRV_PCM_STATE_DISCONNECTED at disconnect
callback, and there is not an entry of SNDRV_PCM_STATE_DISCONNECTED
in snd_pcm_state_names.
This patch adds the missing entry to resolve this issue.
cat /proc/asound/card2/pcm0p/sub0/status
That results in stack traces like the following:
Mark Brown [Mon, 4 Dec 2023 21:42:29 +0000 (21:42 +0000)]
ASoC: qcom: Limit Digital gains on speaker
Merge series from srinivas.kandagatla@linaro.org:
Limit the speaker digital gains to 0dB so that the users will not damage them.
Currently there is a limit in UCM, but this does not stop the user form
changing the digital gains from command line. So limit this in driver
which makes the speakers more safer without active speaker protection in
place.
Apart from this there is also a range check fix in snd_soc_limit_volume
to allow setting this limit correctly.
ASoC: qcom: sc8280xp: Limit speaker digital volumes
Limit the speaker digital gains to 0dB so that the users will not damage them.
Currently there is a limit in UCM, but this does not stop the user form
changing the digital gains from command line. So limit this in driver
which makes the speakers more safer without active speaker protection in
place.
ASoC: ops: add correct range check for limiting volume
Volume can have ranges that start with negative values, ex: -84dB to
+40dB. Apply correct range check in snd_soc_limit_volume before setting
the platform_max. Without this patch, for example setting a 0dB limit on
a volume range of -84dB to +40dB would fail.
ALSA: hda/realtek: fix speakers on XPS 9530 (2023)
XPS 9530 has 2 tweeters and 2 subwoofers powered by CS35L41 amplifier, SPI
connected. For subwoofers to work, it requires both to enable amplifier
support, and to enable output to subwoofers via 0x17 quirk (similalry to
XPS 9510/9520).
These values mirror those of the Pioneer DJM-250MK2 as the channel layout
appears identical based on my observations. This duplication could be removed in
later contributions if desired.
Dinghao Liu [Mon, 4 Dec 2023 07:41:56 +0000 (15:41 +0800)]
ASoC: wm_adsp: fix memleak in wm_adsp_buffer_populate
When wm_adsp_buffer_read() fails, we should free buf->regions.
Otherwise, the callers of wm_adsp_buffer_populate() will
directly free buf on failure, which makes buf->regions a leaked
memory.
Fixes: a792af69b08f ("ASoC: wm_adsp: Refactor compress stream initialisation") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231204074158.12026-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Tue, 28 Nov 2023 12:39:14 +0000 (14:39 +0200)]
ASoC: hdac_hda: Conditionally register dais for HDMI and Analog
The current driver is registering the same dais for each hdev found in the
system which results duplicated widgets to be registered and the kernel
log contains similar prints:
snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten
To avoid such issue, split the dai array into HDMI and non HDMI array and
register them conditionally:
for HDMI hdev only register the dais needed for HDMI
for non HDMI hdev do not register the HDMI dais.
Neil Armstrong [Thu, 16 Nov 2023 16:44:21 +0000 (17:44 +0100)]
ASoC: codecs: lpass-tx-macro: set active_decimator correct default value
The -1 value for active_decimator[dai_id] is considered as "not set",
but at probe the table is initialized a 0, this prevents enabling the
DEC0 Mixer since it will be considered as already set.
Initialize the table entries as -1 to fix tx_macro_tx_mixer_put().
Malcolm Hart [Mon, 27 Nov 2023 20:36:00 +0000 (20:36 +0000)]
ASoC: amd: yc: Fix non-functional mic on ASUS E1504FA
This patch adds ASUSTeK COMPUTER INC "E1504FA" to the quirks file acp6x-mach.c
to enable microphone array on ASUS Vivobook GO 15.
I have this laptop and can confirm that the patch succeeds in enabling the
microphone array.
Takashi Iwai [Thu, 30 Nov 2023 15:13:21 +0000 (16:13 +0100)]
ALSA: hda: Disable power-save on KONTRON SinglePC
It's been reported that the runtime PM on KONTRON SinglePC (PCI SSID
1734:1232) caused a stall of playback after a bunch of invocations.
(FWIW, this looks like an timing issue, and the stall happens rather
on the controller side.)
As a workaround, disable the default power-save on this platform.
Peter Ujfalusi [Mon, 27 Nov 2023 11:16:58 +0000 (13:16 +0200)]
ALSA: hda: intel-nhlt: Ignore vbps when looking for DMIC 32 bps format
When looking up DMIC blob from the NHLT table and the format is 32 bits,
ignore the vbps matching for 32 bps for DMIC since some NHLT table have
the vbps as 24, some have it as 32.
The DMIC hardware supports only one type of 32 bit sample size, which is
24 bit sampling on the MSB side and bits[1:0] is used for indicating the
channel number.
Chancel Liu [Sat, 25 Nov 2023 06:53:00 +0000 (14:53 +0800)]
ASoC: imx-rpmsg: SND_SOC_IMX_RPMSG should depend on OF and I2C
SND_SOC_IMX_RPMSG should depend on OF and I2C. It fixes the following
error reported by kernel test robot:
ld: sound/soc/fsl/imx-rpmsg.o: in function `imx_rpmsg_late_probe':
imx-rpmsg.c:(.text+0x4f): undefined reference to `i2c_find_device_by_fwnode'
Fixes: 5d9f746ca64c ("ASoC: imx-rpmsg: Force codec power on in low power audio mode") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311230506.DPF9vvYY-lkp@intel.com/ Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Link: https://lore.kernel.org/r/20231125065300.6385-1-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Fri, 24 Nov 2023 16:12:06 +0000 (16:12 +0000)]
ASoC: SOF: Extend the enabled DSP core handling
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.
ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores
In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20231124135743.24674-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: SOF: ipc4-topology: Add core_mask in struct snd_sof_pipeline
With IPC4, a pipeline may contain multiple modules in the data
processing domain and they can be scheduled to run on different cores.
Add a new field in struct snd_sof_pipeline to keep track of all the
cores that are associated with the modules in the pipeline. Set the
pipeline core mask for IPC3 when initializing the pipeline widget IPC
structure. For IPC4, set the core mark when initializing the pipeline
widget and initializing processing modules in the data processing domain.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20231124135743.24674-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peter Ujfalusi [Fri, 24 Nov 2023 12:40:32 +0000 (14:40 +0200)]
ASoC: Intel: sof_sdw: Always register the HDMI dai links
The topology files for SDW devices require HDMI dai links to be present and
this is granted under normal conditions but in case of special use cases
the display (i915) driver might not be enabled due to deny-listing,
booting with nomodeset or just not compiled at all.
This should not block the non HDMI audio to be usable so register the dai
links unconditionally. The code has been prepared for this and in case of
no HDMI audio the link is created with dummy codec.
Closes: https://github.com/thesofproject/linux/issues/4594 Closes: https://github.com/thesofproject/linux/issues/4648 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231124124032.15946-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Shengjiu Wang [Thu, 23 Nov 2023 01:14:53 +0000 (09:14 +0800)]
ASoC: fsl_xcvr: refine the requested phy clock frequency
As the input phy clock frequency will divided by 2 by default
on i.MX8MP with the implementation of clk-imx8mp-audiomix driver,
So the requested frequency need to be updated.
The relation of phy clock is:
sai_pll_ref_sel
sai_pll
sai_pll_bypass
sai_pll_out
sai_pll_out_div2
earc_phy_cg
Johan Hovold [Thu, 23 Nov 2023 09:18:15 +0000 (10:18 +0100)]
ASoC: soc-pcm: fix up bad merge
A recent change to address pops and clicks with codecs like WSA883X
touched the same code paths as a fix for clearing DAI parameters and
resulted in a bad merge.
Specifically, commit f0220575e65a ("ASoC: soc-dai: add flag to mute and
unmute stream during trigger") made mute at stream close conditional,
while commit 3efcb471f871 ("ASoC: soc-pcm.c: Make sure DAI parameters
cleared if the DAI becomes inactive") moved that same mute call back to
soc_pcm_hw_clean().
Fix up the bad merge by dropping the second mute call from
soc_pcm_clean() and making sure that the call in soc_pcm_hw_clean() is
conditional as intended.
ALSA: hda: cs35l56: Enable low-power hibernation mode on SPI
SPI hibernation is now supported with the latest hibernation/wake
sequences in the shared ASoC code.
This has a functional dependency on two commits:
commit 3df761bdbc8b ("ASoC: cs35l56: Wake transactions need to be issued
twice")
commit a47cf4dac7dc ("ASoC: cs35l56: Change hibernate sequence to use
allow auto hibernate")
To protect against this, enabling hibernation is conditional on
CS35L56_WAKE_HOLD_TIME_US being defined, which indicates that the new
hibernation sequences are available.
Shengjiu Wang [Wed, 22 Nov 2023 01:42:53 +0000 (09:42 +0800)]
ASoC: fsl_xcvr: Enable 2 * TX bit clock for spdif only case
The bit 10 in TX_DPTH_CTRL register controls the TX clock rate.
If this bit is set, TX datapath clock should be = 2* TX bit rate.
If this bit is not set, TX datapath clock should be 10* TX bit rate.
As the spdif only case, we always use 2 * TX bit clock, so
this bit need to be set.
Shengjiu Wang [Mon, 20 Nov 2023 10:05:35 +0000 (18:05 +0800)]
ASoC: fsl_sai: Fix no frame sync clock issue on i.MX8MP
On i.MX8MP, when the TERE and FSD_MSTR enabled before configuring
the word width, there will be no frame sync clock issue, because
old word width impact the generation of frame sync.
TERE enabled earlier only for i.MX8MP case for the hardware limitation,
So need to disable FSD_MSTR before configuring word width, then enable
FSD_MSTR bit for this specific case.
Stefan Binding [Fri, 17 Nov 2023 16:36:09 +0000 (16:36 +0000)]
ALSA: cs35l41: Fix for old systems which do not support command
Some older laptops using cs35l41 use firmware which does not support
the CSPL_MBOX_CMD_SPK_OUT_ENABLE command.
Firmware versions v0.28.0 and older do not support this command.
Stefan Binding [Fri, 17 Nov 2023 16:36:08 +0000 (16:36 +0000)]
ALSA: hda: cs35l41: Remove unnecessary boolean state variable firmware_running
This state duplicates the running state inside cs_dsp, so is not necessary.
Remove it, and use cs_dsp.running instead.
This brings the CS35L41 HDA driver more inline with its ASoC version,
allowing the same state to be used when calling library functions.
projects / thirdparty / kernel / linux.git / log
