Shaoxuan Yuan [Tue, 9 Aug 2022 12:09:07 +0000 (20:09 +0800)]
mv: from in-cone to out-of-cone
Originally, moving an in-cone <source> to an out-of-cone <destination>
was not possible, mainly because such <destination> is a directory that
is not present in the working tree.
Change the behavior so that we can move an in-cone <source> to
out-of-cone <destination> when --sparse is supplied.
Notice that <destination> can also be an out-of-cone file path, rather
than a directory.
Such <source> can be either clean or dirty, and moving it results in
different behaviors:
A clean move should move <source> to <destination> in the index (do
*not* create <destination> in the worktree), then delete <source> from
the worktree.
A dirty move should move the <source> to the <destination>, both in the
working tree and the index, but should *not* remove the resulted path
from the working tree and should *not* turn on its CE_SKIP_WORKTREE bit.
Optional reading
================
We are strict about cone mode when <destination> is a file path.
The reason is that some of the previous tests that use no-cone mode in
t7002 are keep breaking, mainly because the `dst_mode = SPARSE;` line
added in this patch.
Most features developed in both "from-out-to-in" and "from-in-to-out"
only care about cone mode situation, as no-cone mode is becoming
irrelevant. And because assigning `SPARSE` to `dst_mode` when the
repo is in no-cone mode causes miscellaneous bugs, we should just leave
this new functionality to be exclusive cone mode and save some time.
Helped-by: Derrick Stolee <derrickstolee@github.com> Helped-by: Victoria Dye <vdye@github.com> Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Tue, 9 Aug 2022 12:09:05 +0000 (20:09 +0800)]
mv: check if <destination> is a SKIP_WORKTREE_DIR
Originally, <destination> is assumed to be in the working tree. If it is
not found as a directory, then it is determined to be either a regular file
path, or error out if used under the second form (move into a directory)
of 'git-mv'. Such behavior is not ideal, mainly because Git does not
look into the index for <destination>, which could potentially be a
SKIP_WORKTREE_DIR, which we need to determine for the later "moving from
in-cone to out-of-cone" patch.
Change the logic so that Git first check if <destination> is a directory
with all its contents sparsified (a SKIP_WORKTREE_DIR).
If <destination> is such a sparse directory, then we should modify the
index the same way as we would if this were a non-sparse directory. We
must be careful to ensure that the <destination> is marked with
SKIP_WORKTREE_DIR.
Also add a `dst_w_slash` to reuse the result from `add_slash()`, which
was everywhere and can be simplified.
Helped-by: Derrick Stolee <derrickstolee@github.com> Helped-by: Victoria Dye <vdye@github.com> Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Tue, 9 Aug 2022 12:09:03 +0000 (20:09 +0800)]
mv: rename check_dir_in_index() to empty_dir_has_sparse_contents()
Method check_dir_in_index() introduced in b91a2b6594 (mv: add
check_dir_in_index() and solve general dir check issue, 2022-06-30)
does not describe its intent and behavior well.
Change its name to empty_dir_has_sparse_contents(), which more
precisely describes its purpose.
Reverse the return values, check_dir_in_index() return 0 for success
and 1 for failure; reverse the values so empty_dir_has_sparse_contents()
return 1 for success and 0 for failure. These values are more intuitive
because 1 usually means "has" and 0 means "not found".
Also modify the documentation to better align with the method's
intent and behavior.
Helped-by: Derrick Stolee <derrickstolee@github.com> Helped-by: Victoria Dye <vdye@github.com> Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Tue, 9 Aug 2022 12:09:02 +0000 (20:09 +0800)]
t7002: add tests for moving from in-cone to out-of-cone
Add corresponding tests to test that user can move an in-cone <source>
to out-of-cone <destination> when --sparse is supplied.
Such <source> can be either clean or dirty, and moving it results in
different behaviors:
A clean move should move <source> to <destination> in the index (do
*not* create <destination> in the worktree), then delete <source> from
the worktree.
A dirty move should move the <source> to the <destination>, both in the
working tree and the index, but should *not* remove the resulted path
from the working tree and should *not* turn on its CE_SKIP_WORKTREE bit.
Also make sure that if <destination> exists in the index (existing
check for if <destination> is in the worktree is not enough in
in-to-out moves), warn user against the overwrite. And Git should force
the overwrite when supplied with -f or --force.
Helped-by: Derrick Stolee <derrickstolee@github.com> Helped-by: Victoria Dye <vdye@github.com> Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:37 +0000 (10:37 +0800)]
mv: add check_dir_in_index() and solve general dir check issue
Originally, moving a <source> directory which is not on-disk due
to its existence outside of sparse-checkout cone, "giv mv" command
errors out with "bad source".
Add a helper check_dir_in_index() function to see if a directory
name exists in the index. Also add a SKIP_WORKTREE_DIR bit to mark
such directories.
Change the checking logic, so that such <source> directory makes
"giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Helped-by: Victoria Dye <vdye@github.com> Helped-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:36 +0000 (10:37 +0800)]
mv: use flags mode for update_mode
As suggested by Derrick [1], move the in-line definition of
"enum update_mode" to the top of the file and make it use "flags"
mode (each state is a different bit in the word).
Change the flag assignments from '=' (single assignment) to '|='
(additive). Also change flag evaluation from '==' to '&', etc.
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:35 +0000 (10:37 +0800)]
mv: check if <destination> exists in index to handle overwriting
Originally, moving a sparse file into cone can result in unwarned
overwrite of existing entry. The expected behavior is that if the
<destination> exists in the entry, user should be prompted to supply
a [-f|--force] to carry out the operation, or the operation should
fail.
Add a check mechanism to do that.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:34 +0000 (10:37 +0800)]
mv: check if out-of-cone file exists in index with SKIP_WORKTREE bit
Originally, moving a <source> file which is not on-disk but exists in
index as a SKIP_WORKTREE enabled cache entry, "giv mv" command errors
out with "bad source".
Change the checking logic, so that such <source>
file makes "giv mv" command warns with "advise_on_updating_sparse_paths()"
instead of "bad source"; also user now can supply a "--sparse" flag so
this operation can be carried out successfully.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:32 +0000 (10:37 +0800)]
mv: update sparsity after moving from out-of-cone to in-cone
Originally, "git mv" a sparse file from out-of-cone to
in-cone does not update the moved file's sparsity (remove its
SKIP_WORKTREE bit). And the corresponding cache entry is, unexpectedly,
not checked out in the working tree.
Update the behavior so that:
1. Moving from out-of-cone to in-cone removes the SKIP_WORKTREE bit from
corresponding cache entry.
2. The moved cache entry is checked out in the working tree to reflect
the updated sparsity.
Helped-by: Victoria Dye <vdye@github.com> Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:31 +0000 (10:37 +0800)]
t1092: mv directory from out-of-cone to in-cone
Add test for "mv: add check_dir_in_index() and solve general dir check
issue" in this series.
This change tests the following:
1. mv <source> as a directory on the sparse index boundary (where it
would be a sparse directory in a sparse index).
2. mv <source> as a directory which is deeper than the boundary (so
the sparse index would expand in the cache_name_pos() method).
These tests can be written now for correctness, but later the first case
can be updated to use the 'ensure_not_expanded' helper in t1092.
Suggested-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Thu, 30 Jun 2022 02:37:30 +0000 (10:37 +0800)]
t7002: add tests for moving out-of-cone file/directory
Add corresponding tests to test following situations:
We do not have sufficient coverage of moving files outside
of a sparse-checkout cone. Create new tests covering this
behavior, keeping in mind that the user can include --sparse
(or not), move a file or directory, and the destination can
already exist in the index (in this case user can use --force
to overwrite existing entry).
Helped-by: Victoria Dye <vdye@github.com> Helped-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 26 Jun 2022 09:29:35 +0000 (11:29 +0200)]
revert: config documentation fixes
43966ab315 (revert: optionally refer to commit in the "reference"
format, 2022-05-26) added the documentation file config/revert.txt.
Actually include it in config.txt.
Make is used with a bare infinitive after the object; remove the "to".
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Thu, 23 Jun 2022 19:02:01 +0000 (15:02 -0400)]
Documentation/config/transfer.txt: fix typo
Commit 7281c196b1 (transfer doc: move fetch.credentialsInUrl to
"transfer" config namespace, 2022-06-15) propagates a typo from 6dcbdc0d66 (remote: create fetch.credentialsInUrl config, 2022-06-06),
where "other" is misspelled as "oher". Fix the typo accordingly.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Wed, 22 Jun 2022 07:46:22 +0000 (15:46 +0800)]
Merge branch 'master' of github.com:git/git
* 'master' of github.com:git/git:
name-rev: prefix annotate-stdin with '--' in message
git-prompt: fix expansion of branch colour codes
git-prompt: make colourization consistent
Jiang Xin [Sat, 18 Jun 2022 06:02:07 +0000 (14:02 +0800)]
Merge branch 'master' of github.com:git/git
* 'master' of github.com:git/git: (22 commits)
Git 2.37-rc1
git-compat-util: allow root to access both SUDO_UID and root owned
i18n: fix mismatched camelCase config variables
Another batch of fixes before -rc1
bug_fl(): correctly initialize trace2 va_list
relative_url(): fix incorrect condition
pack-mtimes: avoid closing a bogus file descriptor
read_index_from(): avoid memory leak
submodule--helper: avoid memory leak when fetching submodules
submodule-config: avoid memory leak
fsmonitor: avoid memory leak in `fsm_settings__get_incompatible_msg()`
cache-tree: remove cache_tree_find_path()
pack-write: drop always-NULL parameter
t5329: test 'git gc --cruft' without '--prune=now'
t2107: test 'git update-index --verbose'
perf-lib: fix missing test titles in output
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
ci(github): also mark up compile errors
ci(github): use grouping also in the `win-build` job
...
Junio C Hamano [Sat, 18 Jun 2022 00:12:31 +0000 (17:12 -0700)]
Merge branch 'cb/path-owner-check-with-sudo-plus'
"sudo git foo" used to consider a repository owned by the original
user a safe one to access; it now also considers a repository owned
by root a safe one, too (after all, if an attacker can craft a
malicious repository owned by root, the box is 0wned already).
* cb/path-owner-check-with-sudo-plus:
git-compat-util: allow root to access both SUDO_UID and root owned
git-compat-util: allow root to access both SUDO_UID and root owned
Previous changes introduced a regression which will prevent root for
accessing repositories owned by thyself if using sudo because SUDO_UID
takes precedence.
Loosen that restriction by allowing root to access repositories owned
by both uid by default and without having to add a safe.directory
exception.
A previous workaround that was documented in the tests is no longer
needed so it has been removed together with its specially crafted
prerequisite.
Helped-by: Johanness Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Fri, 17 Jun 2022 10:03:09 +0000 (18:03 +0800)]
i18n: fix mismatched camelCase config variables
Some config variables are combinations of multiple words, and we
typically write them in camelCase forms in manpage and translatable
strings. It's not easy to find mismatches for these camelCase config
variables during code reviews, but occasionally they are identified
during localization translations.
To check for mismatched config variables, I introduced a new feature
in the helper program for localization[^1]. The following mismatched
config variables have been identified by running the helper program,
such as "git-po-helper check-pot".
Junio C Hamano [Fri, 17 Jun 2022 17:33:32 +0000 (10:33 -0700)]
Merge branch 'js/ci-github-workflow-markup'
Recent CI update hides certain failures in test jobs, which has
been corrected.
* js/ci-github-workflow-markup:
ci(github): also mark up compile errors
ci(github): use grouping also in the `win-build` job
ci(github): bring back the 'print test failures' step
Jeff King [Thu, 16 Jun 2022 20:04:25 +0000 (16:04 -0400)]
bug_fl(): correctly initialize trace2 va_list
The code added 0cc05b044f (usage.c: add a non-fatal bug() function to go
with BUG(), 2022-06-02) sets up two va_list variables: one to output to
stderr, and one to trace2. But the order of initialization is wrong:
We copy the contents of "ap" into "cp" before it is initialized, meaning
it is full of garbage. The two should be swapped.
However, there's another bug, noticed by Johannes Schindelin: we forget
to call va_end() for the copy. So instead of just fixing the copy's
initialization, let's do two separate start/end pairs. This is allowed
by the standard, and we don't need to use copy here since we have access
to the original varargs. Matching the pairs with the calls makes it more
obvious that everything is being done correctly.
Note that we do call bug_fl() in the tests, but it didn't trigger this
problem because our format string doesn't have any placeholders. So even
though we were passing a garbage va_list through the stack, nobody ever
needed to look at it. We can easily adjust one of the trace2 tests to
trigger this, both for bug() and for BUG(). The latter isn't broken, but
it's nice to exercise both a bit more. Without the fix in this patch
(but with the test change), the bug() case causes a segfault.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 63e95beb085c (submodule: port resolve_relative_url from shell to C,
2016-04-15), we added a loop over `url` where we are looking for `../`
or `./` components.
The loop condition we used is the pointer `url` itself, which is clearly
not what we wanted.
Pointed out by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-mtimes: avoid closing a bogus file descriptor
In 94cd775a6c52 (pack-mtimes: support reading .mtimes files,
2022-05-20), code was added to close the file descriptor corresponding
to the mtimes file.
However, it is possible that opening that file failed, in which case we
are closing a file descriptor with the value `-1`. Let's guard that
`close()` call.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 998330ac2e7c (read-cache: look for shared index files next to the
index, too, 2021-08-26), we added code that allocates memory to store
the base path of a shared index, but we never released that memory.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule--helper: avoid memory leak when fetching submodules
In c51f8f94e5b3 (submodule--helper: run update procedures from C,
2021-08-24), we added code that first obtains the default remote, and
then adds that to a `strvec`.
However, we never released the default remote's memory.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 961b130d20c9 (branch: add --recurse-submodules option for branch
creation, 2022-01-28), a funny pattern was introduced where first some
struct is `xmalloc()`ed, then we resize an array whose element type is
the same struct, and then the first struct's contents are copied into
the last element of that array.
Crucially, the `xmalloc()`ed memory never gets released.
Let's avoid that memory leak and that memory allocation dance altogether
by first reallocating the array, then using a pointer to the last array
element to go forward.
Reported by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 16 Jun 2022 13:13:50 +0000 (13:13 +0000)]
cache-tree: remove cache_tree_find_path()
This reverts 080ab56a46 (cache-tree: implement cache_tree_find_path(),
2022-05-23). The cache_tree_find_path() method was never actually called
in the topic that added it. I cannot find any reference to it in any of
my forks, so this appears to not be needed at the moment.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 16 Jun 2022 13:13:49 +0000 (13:13 +0000)]
pack-write: drop always-NULL parameter
write_mtimes_file() takes an mtimes parameter as its first option, but
the only caller passes a NULL constant. Drop this parameter to simplify
logic. This can be reverted if that parameter is needed in the future.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 16 Jun 2022 13:13:48 +0000 (13:13 +0000)]
t5329: test 'git gc --cruft' without '--prune=now'
Replace a 'git repack --cruft -d' with the wrapper 'git gc --cruft' to
exercise some logic in builtin/gc.c that adds the '--cruft' option to
the underlying 'git repack' command.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 16 Jun 2022 13:13:47 +0000 (13:13 +0000)]
t2107: test 'git update-index --verbose'
The '--verbose' option reports what is being added and removed from the
index, but has not been tested up to this point. Augment the tests in
t2107 to check the '--verbose' option in some scenarios.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 16 Jun 2022 07:09:32 +0000 (03:09 -0400)]
perf-lib: fix missing test titles in output
Commit 5dccd9155f (t/perf: add iteration setup mechanism to perf-lib,
2022-04-04) modified the parameter parsing of test_wrapper() such that
the test title was no longer in $1, and is instead in $test_title_.
We correctly pass the new variable to the code which outputs the title
to the log, but missed the spot in test_wrapper() where the title is
written to the ".descr" file which is used to produce the final output
table. As a result, all of the titles are missing from that table (or
worse, using whatever was left in $1):
$ ./p0000-perf-lib-sanity.sh
[...]
Test this tree
------------------------------
0000.1: 0.01(0.01+0.00)
0000.2: 0.01(0.00+0.01)
0000.4: 0.00(0.00+0.00)
0000.5: true 0.00(0.00+0.00)
0000.7: 0.00(0.00+0.00)
0000.8: 0.00(0.00+0.00)
After this patch, we get the pre-5dccd9155f output:
Test this tree
--------------------------------------------------------------------------
0000.1: test_perf_default_repo works 0.00(0.00+0.00)
0000.2: test_checkout_worktree works 0.01(0.00+0.01)
0000.4: export a weird var 0.00(0.00+0.00)
0000.5: éḿíẗ ńöń-ÁŚĆÍÍ ćḧáŕáćẗéŕś 0.00(0.00+0.00)
0000.7: important variables available in subshells 0.00(0.00+0.00)
0000.8: test-lib-functions correctly loaded in subshells 0.00(0.00+0.00)
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Henrie [Thu, 16 Jun 2022 14:39:06 +0000 (08:39 -0600)]
l10n: es: update translation
* fix more translation mistakes
* consistently translate "amend" as "enmendar"
* consistently translate "chunk" as "fragmento"
* consistently translate "prune" as "recortar" or "recorte"
* consistently translate "push" as "empujar" or "empuje"
* consistently translate "rephrase" as "refrasear" or "refraseo"
* consistently translate "squash" as "aplastar" or "aplastamiento"
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Junio C Hamano [Wed, 15 Jun 2022 22:09:28 +0000 (15:09 -0700)]
Merge branch 'po/rebase-preserve-merges'
Various error messages that talk about the removal of
"--preserve-merges" in "rebase" have been strengthened, and "rebase
--abort" learned to get out of a state that was left by an earlier
use of the option.
* po/rebase-preserve-merges:
rebase: translate a die(preserve-merges) message
rebase: note `preserve` merges may be a pull config option
rebase: help users when dying with `preserve-merges`
rebase.c: state preserve-merges has been removed
Junio C Hamano [Wed, 15 Jun 2022 22:09:27 +0000 (15:09 -0700)]
Merge branch 'jc/revert-show-parent-info'
"git revert" learns "--reference" option to use more human-readable
reference to the commit it reverts in the message template it
prepares for the user.
* jc/revert-show-parent-info:
revert: --reference should apply only to 'revert', not 'cherry-pick'
revert: optionally refer to commit in the "reference" format
tests: add LIBCURL prerequisite to tests needing libcurl
Add and use a LIBCURL prerequisite for tests added in 6dcbdc0d661 (remote: create fetch.credentialsInUrl config,
2022-06-06).
These tests would get as far as emitting a couple of the warnings we
were testing for, but would then die as we had no "git-remote-https"
program compiled.
It would be more consistent with other prerequisites (e.g. PERL for
NO_PERL) to name this "CURL", but since e9184b0789a (t5561: skip tests
if curl is not available, 2018-04-03) we've had that prerequisite
defined for checking of we have the curl(1) program.
The existing "CURL" prerequisite is only used in one place, and we
should probably name it "CURL_PROGRAM", then rename "LIBCURL" to
"CURL" as a follow-up, but for now (pre-v2.37.0) let's aim for the
most minimal fix possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
transfer doc: move fetch.credentialsInUrl to "transfer" config namespace
Rename the "fetch.credentialsInUrl" configuration variable introduced
in 6dcbdc0d661 (remote: create fetch.credentialsInUrl config,
2022-06-06) to "transfer".
There are existing exceptions, but generally speaking the
"<namespace>.<var>" configuration should only apply to command
described in the "namespace" (and its sub-commands, so e.g. "clone.*"
or "fetch.*" might also configure "git-remote-https").
But in the case of "fetch.credentialsInUrl" we've got a configuration
variable that configures the behavior of all of "clone", "push" and
"fetch", someone adjusting "fetch.*" configuration won't expect to
have the behavior of "git push" altered, especially as we have the
pre-existing "{transfer,fetch,receive}.fsckObjects", which configures
different parts of the transfer dialog.
So let's move this configuration variable to the "transfer" namespace
before it's exposed in a release. We could add all of
"{transfer,fetch,pull}.credentialsInUrl" at some other time, but once
we have "fetch" configure "pull" such an arrangement would would be a
confusing mess, as we'd at least need to have "fetch" configure
"push" (but not the other way around), or change existing behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch doc: note "pushurl" caveat about "credentialsInUrl", elaborate
Amend the documentation and release notes entry for the
"fetch.credentialsInUrl" feature added in 6dcbdc0d661 (remote: create
fetch.credentialsInUrl config, 2022-06-06), it currently doesn't
detect passwords in `remote.<name>.pushurl` configuration. We
shouldn't lull users into a false sense of security, so we need to
mention that prominently.
This also elaborates and clarifies the "exposes the password in
multiple ways" part of the documentation. As noted in [1] a user
unfamiliar with git's implementation won't know what to make of that
scary claim, e.g. git hypothetically have novel git-specific ways of
exposing configured credentials.
The reality is that this configuration is intended as an aid for users
who can't fully trust their OS's or system's security model, so lets
say that's what this is intended for, and mention the most common ways
passwords stored in configuration might inadvertently get exposed.
add -i tests: mark "TODO" depending on GIT_TEST_ADD_I_USE_BUILTIN
Fix an issue that existed before 0527ccb1b55 (add -i: default to the
built-in implementation, 2021-11-30), but which became the default
with that change, we should not be marking tests that are known to
pass as "TODO" tests.
When GIT_TEST_ADD_I_USE_BUILTIN=1 was made the default we started
passing the tests added in 0f0fba2cc87 (t3701: add a test for advanced
split-hunk editing, 2019-12-06) and 1bf01040f0c (add -p: demonstrate
failure when running 'edit' after a split, 2015-04-16).
Thus we've been emitting this sort of output:
$ prove ./t3701-add-interactive.sh
./t3701-add-interactive.sh .. ok
All tests successful.
Which isn't just cosmetic, but due to issues with
test_expect_failure (see [1]) we could e.g. be hiding something as bad
as a segfault in the new implementation. It makes sense catch that,
especially before we put out a release with the built-in "add -i", so
let's generalize the check we were already doing in 0527ccb1b55 with a
new "ADD_I_USE_BUILTIN" prerequisite.
Junio C Hamano [Mon, 13 Jun 2022 22:53:41 +0000 (15:53 -0700)]
Merge branch 'ab/hooks-regression-fix'
In Git 2.36 we revamped the way how hooks are invoked. One change
that is end-user visible is that the output of a hook is no longer
directly connected to the standard output of "git" that spawns the
hook, which was noticed post release. This is getting corrected.
* ab/hooks-regression-fix:
hook API: fix v2.36.0 regression: hooks should be connected to a TTY
run-command: add an "ungroup" option to run_process_parallel()
Junio C Hamano [Mon, 13 Jun 2022 22:53:41 +0000 (15:53 -0700)]
Merge branch 'pb/range-diff-with-submodule'
"git -c diff.submodule=log range-diff" did not show anything for
submodules that changed in the ranges being compared, and
"git -c diff.submodule=diff range-diff" did not work correctly.
Fix this by including the "--submodule=short" output
unconditionally to be compared.
* pb/range-diff-with-submodule:
range-diff: show submodule changes irrespective of diff.submodule
When GCC produces those helpful errors, we will want to present them in
the GitHub workflow runs in the most helpful manner. To that end, we
want to use workflow commands to render errors and warnings:
https://docs.github.com/en/actions/using-workflows/workflow-commands-for-github-actions
In the previous commit, we ensured that grouping is used for the build
in all jobs, and this allows us to piggy-back onto the `group` function
to transmogrify the output.
Note: If `set -o pipefail` was available, we could do this in a little
more elegant way. But since some of the steps are run using `dash`, we
have to do a little `{ ...; echo $? >exit.status; } | ...` dance.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 10 Jun 2022 22:04:15 +0000 (15:04 -0700)]
Merge branch 'ab/bug-if-bug'
A new bug() and BUG_if_bug() API is introduced to make it easier to
uniformly log "detect multiple bugs and abort in the end" pattern.
* ab/bug-if-bug:
cache-tree.c: use bug() and BUG_if_bug()
receive-pack: use bug() and BUG_if_bug()
parse-options.c: use optbug() instead of BUG() "opts" check
parse-options.c: use new bug() API for optbug()
usage.c: add a non-fatal bug() function to go with BUG()
common-main.c: move non-trace2 exit() behavior out of trace2.c
projects / thirdparty / git.git / log
