ASoC: Intel: avs: Disable DSP before loading basefw
When audio controller is passed-through to the guest machine in
virtualized environment, the basefw load will fail the next time guest
OS reboots. Disable the DSP main core before loading the base firmware
to sanitize the environment.
Signed-off-by: Wu Zhou <wu.zhou@intel.com> Signed-off-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230929112436.787058-6-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Intel: avs: Keep module refcount up when gathering traces
To prevent rmmod and similar behave unexpectedly when invoked on
snd_soc_avs module while the AudioDSP firmware tracing is ongoing,
increase the module refcount until the tracing is stopped.
ASoC: Intel: avs: Preallocate memory for module configuration
In order to instantiate modules on the firmware side, the driver sends
payload with module configuration. In some case size of this information
is not known before hand, so driver allocates temporary memory during
module creation and frees it after use. Optimize the flow a bit, by
preallocating maximum buffer. This removes the time spend on allocating
memory, as well as potential OOM errors during module initialization.
Handlers for modules, where configuration data fits on stack, are left
as is.
Instead of using PAGE_SIZE as base of definitions in headers, use
generic size defines. While x86 platforms use 4096 as page size, there
are platforms which use different page sizes. Two of changed defines are
for memory windows on DSP side, which have fixed size independent of
host side page size. Another one is for CLDMA buffer which also doesn't
need to change with page size.
ASoC: Intel: avs: Move IPC error messages one level down
Code size can be reduced if avs_dsp_send_xxx_msg()s take responsibility
for dumping logs in case of an IPC message failure. In consequence,
avs_ipc_err() helper is removed.
There's generally no need to use definitions to reference from
individual properties. All the property names are the same, and all the
defined properties are used by all the users.
There are examples in documentation for codec to codec connection.
However they show method before recent series of patches which renamed
the fields. Update documentation accordingly.
This patch series create a TDM source select property and use it to
decide which TDM data source is connected.
Following by the below patch disccuion
https://lore.kernel.org/lkml/1695780376-32301-1-git-send-email-cy_huang@richtek.com/#t
It may not be a good choice to add the user controlable mixer control
item. Since it follows the board design, make it as a device property.
Weidong Wang [Thu, 28 Sep 2023 10:57:22 +0000 (18:57 +0800)]
ASoC: codecs: Modify the transmission method of parameters
Change the transmission mode of the "aw88395_dev_get_prof_name"
function parameter, Instead of using return values for data
transfer, parameters are used
Weidong Wang [Thu, 28 Sep 2023 10:57:18 +0000 (18:57 +0800)]
ASoC: dt-bindings: awinic,aw88395: Add properties for multiple PA support
Add two properties, the "awinic,audio-channel" property and the
"awinic,sync-flag". The "awinic,audio-channel" is used to make
different PA load different configurations, the "awinic,sync-flag"
is used to synchronize the phases of multiple PA. These two properties
will be read by the corresponding driver, allowing multi-PA to
achieve better playback effect.
"asoc_simple_card_info" was renamed to "simple_util_info" by
commit ad484cc98f2 ("ASoC: remove asoc_xxx() compatible macro").
This patch fixup it For SH7724 boards.
Fixes: ad484cc98f2 ("ASoC: remove asoc_xxx() compatible macro") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309280417.rOLRdrdM-lkp@intel.com/ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87ttrfgo3j.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
Chancel Liu [Wed, 20 Sep 2023 15:36:21 +0000 (23:36 +0800)]
ASoC: soc-pcm.c: Make sure DAI parameters cleared if the DAI becomes inactive
The commit 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs parameters after
stream_active is updated") tries to make sure DAI parameters can be
cleared properly through moving the cleanup to the place where stream
active status is updated. However, it will cause the cleanup only
happening in soc_pcm_close().
Suppose a case: aplay -Dhw:0 44100.wav 48000.wav. The case calls
soc_pcm_open()->soc_pcm_hw_params()->soc_pcm_hw_free()->
soc_pcm_hw_params()->soc_pcm_hw_free()->soc_pcm_close() in order. The
parameters would be remained in the system even if the playback of
44100.wav is finished.
The case requires us clearing parameters in phase of soc_pcm_hw_free().
However, moving the DAI parameters cleanup back to soc_pcm_hw_free()
has the risk that DAIs parameters never be cleared if there're more
than one stream, see commit 1da681e52853 ("ASoC: soc-pcm.c: Clear DAIs
parameters after stream_active is updated") for more details.
To meet all these requirements, in addition to do DAI parameters
cleanup in soc_pcm_hw_free(), also check it in soc_pcm_close() to make
sure DAI parameters cleared if the DAI becomes inactive.
Mark Brown [Tue, 26 Sep 2023 13:16:52 +0000 (15:16 +0200)]
ASoC: convert asoc_xxx() to snd_soc_xxx()
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
ASoC is using 2 type of prefix (asoc_xxx() vs snd_soc_xxx()), but there
is no particular reason about that [1].
To reduce confusing, standarding these to snd_soc_xxx() is sensible.
This patch adds asoc_xxx() macro to keep compatible for a while.
It will be removed if all drivers were switched to new style.
Shengjiu Wang [Wed, 20 Sep 2023 09:43:12 +0000 (17:43 +0800)]
ASoC: fsl-asoc-card: use integer type for fll_id and pll_id
As the pll_id and pll_id can be zero (WM8960_SYSCLK_AUTO)
with the commit 2bbc2df46e67 ("ASoC: wm8960: Make automatic the
default clocking mode")
Then the machine driver will skip to call set_sysclk() and set_pll()
for codec, when the sysclk rate is different with what wm8960 read
at probe, the output sound frequency is wrong.
So change the fll_id and pll_id initial value, still keep machine
driver's behavior same as before.
Rob Herring [Mon, 25 Sep 2023 22:09:28 +0000 (17:09 -0500)]
ASoC: dt-bindings: Add missing (unevaluated|additional)Properties on child node schemas
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Add unevaluatedProperties or additionalProperties as appropriate.
ASoC: sh: dma-sh7760: Use %pad and %zu to format dma_addr_t and size_t
sound/soc/sh/dma-sh7760.c: In function ‘camelot_prepare’:
./include/linux/kern_levels.h:5:25: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘unsigned int’ [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
sound/soc/sh/dma-sh7760.c:198:9: note: in expansion of macro ‘pr_debug’
198 | pr_debug("PCM data: addr 0x%08lx len %d\n",
| ^~~~~~~~
Fix this by using "%pad" and taking the address to format the DMA
address. While at it, use "%zu" to format size_t.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309250903.XNAjFuxy-lkp@intel.com/ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230925125646.3681807-1-geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: audio-iio-aux: Use flex array to simplify code
"io-channel-names" is expected to have few values, so there is no real
point to allocate audio_iio_aux_chan structure with a dedicate memory
allocation.
Using a flexible array for struct audio_iio_aux->chans avoids the
overhead of an additional, managed, memory allocation.
This also saves an indirection when the array is accessed.
Finally, __counted_by() can be used for run-time bounds checking if
configured and supported by the compiler.
ASoC: simple_card_utils.h: convert not to use asoc_xxx()
ASoC is using 2 type of prefix (asoc_xxx() vs snd_soc_xxx()),
but these are unified into snd_soc_xxx().
simple_card / audio_graph drivers are historically using
asoc_xxx() prefix too. simple_card / audio_graph are not
ASoC framework, so let's use simple_card_xxx_() / audio_graph_xxx()
for global function prefix.
This patch has asoc_xxx() as define to keep compatible.
It will be removed if all drivers were switched to new style.
ASoC is using 2 type of prefix (asoc_xxx() vs snd_soc_xxx()), but there
is no particular reason about that [1].
To reduce confusing, standarding these to snd_soc_xxx() is sensible.
This patch adds asoc_xxx() macro to keep compatible for a while.
It will be removed if all drivers were switched to new style.
Shengjiu Wang [Tue, 19 Sep 2023 09:42:13 +0000 (17:42 +0800)]
ASoC: fsl_sai: Don't disable bitclock for i.MX8MP
On i.MX8MP, the BCE and TERE bit are binding with mclk
enablement, if BCE and TERE are cleared the MCLK also be
disabled on output pin, that cause the external codec (wm8960)
in wrong state.
Codec (wm8960) is using the mclk to generate PLL clock,
if mclk is disabled before disabling PLL, the codec (wm8960)
won't generate bclk and frameclk when sysclk switch to
MCLK source in next test case.
The test case:
$aplay -r44100 test1.wav (PLL source)
$aplay -r48000 test2.wav (MCLK source)
aplay: pcm_write:2127: write error: Input/output error
ASoC: soc-generic-dmaengine-pcm: Fix function name in comment
While browsing/grepping in the sound core, I found that
snd_dmaengine_set_config_from_dai_data() did not exist, in favor of
snd_dmaengine_pcm_set_config_from_dai_data(). Fix the typo.
Mark Brown [Thu, 21 Sep 2023 16:45:30 +0000 (17:45 +0100)]
ASoC: Add rtq9128 audio amplifier
Merge series from cy_huang@richtek.com:
This patch series adds Richtek rtq9128 automotive audio amplifier
support. It can deliver up to 4x75W into 4Ohm speaker from a 25V
supply in automotive applications.
The array size is irrelevant with SNDRV_CARDS. dev_index is from
codec address and the available codec number is HDA_MAX_CODECS.
Also, hda_pvt->fw is for a temporary use, no need to add a new extra
field in hdac_hda_priv{}.
Mark Brown [Tue, 19 Sep 2023 17:22:11 +0000 (18:22 +0100)]
ASoC: SOF: ipc4/Intel: Support for firmware exception
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
When a firmware crashes it creats a panic information into a telemetry
slot. The panic format is defined by Zephyr, includes stack and
additional information to help to identify the reason for the crash.
Part of the firmware exception handling the firmware also sends an
EXCEPTION_CAUGHT notification.
This series implements the kernel side handling of the exception: print
information into the kernel log export the whole telemetry slot to user
space for tools extract additional information from the panic dump.
Mark Brown [Tue, 19 Sep 2023 17:11:02 +0000 (18:11 +0100)]
ASoC: SOF: ipc4-control: Support for Switch and Enum
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Currently IPC4 has no notion of a switch or enum type of control which
is a generic concept in ALSA.
The generic support for these control types will be as follows:
- large config is used to send the channel-value par array
- param_id of a SWITCH type is 200
- param_id of an ENUM type is 201
Each module need to support a switch or/and enum must handle these
universal param_ids. The message payload is described by struct
sof_ipc4_control_msg_payload.
projects / thirdparty / kernel / linux.git / log
