Bart Van Assche [Wed, 16 Oct 2024 20:12:06 +0000 (13:12 -0700)]
scsi: ufs: core: Move the MCQ scsi_add_host() call
Whether or not MCQ is used, call scsi_add_host() from
ufshcd_add_scsi_host(). For MCQ this patch swaps the order of the
scsi_add_host() and UFS device initialization. This patch prepares for
combining the two scsi_add_host() calls.
Bart Van Assche [Wed, 16 Oct 2024 20:12:05 +0000 (13:12 -0700)]
scsi: ufs: core: Remove code that is no longer needed
Previous changes guarantee that hba->scsi_host_added is true before
ufshcd_device_init() is called. Hence, remove the code from
ufshcd_device_init() that depends on hba->scsi_host_added being false.
Bart Van Assche [Wed, 16 Oct 2024 20:12:04 +0000 (13:12 -0700)]
scsi: ufs: core: Expand the ufshcd_device_init(hba, true) call
Expand the ufshcd_device_init(hba, true) call and remove all code that
depends on init_dev_params == false. This change prepares for combining
the two scsi_add_host() calls.
Bart Van Assche [Wed, 16 Oct 2024 20:12:03 +0000 (13:12 -0700)]
scsi: ufs: core: Move the ufshcd_device_init(hba, true) call
ufshcd_async_scan() is called (asynchronously) only by ufshcd_init().
Move the ufshcd_device_init(hba, true) call from ufshcd_async_scan()
into ufshcd_init(). This patch prepares for moving both scsi_add_host()
calls into ufshcd_add_scsi_host(). Calling ufshcd_device_init() from
ufshcd_init() without holding hba->host_sem is safe. This is safe
because hba->host_sem serializes core code and sysfs callbacks. The
ufshcd_device_init() call is moved before the scsi_add_host() call and
hence happens before any SCSI sysfs attributes are created.
Since ufshcd_device_init() may call scsi_add_host(), only call
scsi_add_host() from ufshcd_add_scsi_host() if the SCSI host has not yet
been added by ufshcd_device_init().
Bart Van Assche [Wed, 16 Oct 2024 20:12:02 +0000 (13:12 -0700)]
scsi: ufs: core: Move the ufshcd_device_init() calls
Move the ufshcd_device_init() and ufshcd_process_hba_result() calls to
the ufshcd_probe_hba() callers. This change refactors the code without
modifying the behavior of the UFSHCI driver. This change prepares for
moving one ufshcd_device_init() call into ufshcd_init().
Bart Van Assche [Wed, 16 Oct 2024 20:12:01 +0000 (13:12 -0700)]
scsi: ufs: core: Convert a comment into an explicit check
The comment /* UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH is set */ is
only correct if ufshcd_device_init() is only called by
ufshcd_probe_hba(). Convert the comment into an explicit check. This
patch prepares for moving the ufshcd_device_init() calls.
Prepare for moving a ufshcd_device_init() call from inside
ufshcd_probe_hba() into the ufshcd_probe_hba() callers by introducing
the function ufshcd_process_probe_result(). No functionality has been
changed.
Bart Van Assche [Wed, 16 Oct 2024 20:11:59 +0000 (13:11 -0700)]
scsi: ufs: core: Call ufshcd_add_scsi_host() later
Call ufshcd_add_scsi_host() after host controller initialization has
completed. This is safe because no code between the old and new
ufshcd_add_scsi_host() call site depends on the scsi_add_host() call.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241016201249.2256266-4-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for inlining one ufshcd_device_init() call by introducing the
new function ufshcd_post_device_init(). No functionality has been
changed.
Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241016201249.2256266-3-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Wed, 16 Oct 2024 20:11:57 +0000 (13:11 -0700)]
scsi: ufs: core: Introduce ufshcd_add_scsi_host()
Move the code for adding a SCSI host and also the code for managing TMF
tags from ufshcd_init() into a new function called
ufshcd_add_scsi_host(). This patch prepares for combining the two
scsi_add_host() calls into a single call. No functionality has been
changed.
Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241016201249.2256266-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avri Altman [Thu, 24 Oct 2024 07:50:33 +0000 (10:50 +0300)]
scsi: ufs: core: Remove redundant host_lock calls around UTRLCLR.
There is no need to serialize single read/write calls to the host
controller registers. Remove the redundant host_lock calls that protect
access to the request list cLear register: UTRLCLR.
Avri Altman [Thu, 24 Oct 2024 07:50:32 +0000 (10:50 +0300)]
scsi: ufs: core: Remove redundant host_lock calls around UTMRLCLR
There is no need to serialize single read/write calls to the host
controller registers. Remove the redundant host_lock calls that protect
access to the task management request List cLear register: UTMRLCLR.
Avri Altman [Thu, 24 Oct 2024 07:50:31 +0000 (10:50 +0300)]
scsi: ufs: core: Remove redundant host_lock calls around UTMRLDBR
There is no need to serialize single read/write calls to the host
controller registers. Remove the redundant host_lock calls that protect
access to the task management doorbell register: UTMRLDBR.
Bart Van Assche [Tue, 22 Oct 2024 19:31:02 +0000 (12:31 -0700)]
scsi: ufs: core: Improve ufshcd_mcq_sq_cleanup()
From the UFSHCI specification: "CleanUp Command Return Code (RTC): host
controller sets this return code to provide more details of the cleanup
process. It is valid only when CUS is 1." Hence, do not read RTC if the
CUS bitfield is zero.
Cc: Bao D. Nguyen <quic_nguyenb@quicinc.com> Fixes: 8d7290348992 ("scsi: ufs: mcq: Add supporting functions for MCQ abort") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241022193130.2733293-7-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use blk_mq_quiesce_tagset() instead of ufshcd_scsi_block_requests() and
blk_mq_wait_quiesce_done(). Since this patch removes the last callers of
ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests(), remove
these functions.
The ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests()
calls were introduced in ufshcd_exception_event_handler() to prevent
that querying the exception event information would time out. Commit 10fe5888a40e ("scsi: ufs: increase the scsi query response timeout")
increased the timeout for querying exception information from 30 ms to
1.5 s and thereby eliminated the risk that a timeout would happen.
Hence, the calls to block and unblock SCSI requests are superfluous.
Remove these calls.
Reviewed-by: Peter Wang <peter.wang@mediatek.com> Tested-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241022193130.2733293-5-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The MCQ code is also valid for legacy mode. Hence, remove the legacy
mode code and retain the MCQ code. Since it is not an error if a command
completes while ufshcd_try_to_abort_task() is in progress, use
dev_info() instead of dev_err() to report this.
Bart Van Assche [Tue, 22 Oct 2024 19:30:58 +0000 (12:30 -0700)]
scsi: ufs: core: Remove goto statements from ufshcd_try_to_abort_task()
The only statement that follows the 'out:' label in
ufshcd_try_to_abort_task() is a return-statement. Simplify this function
by changing 'goto out' statements into return statements.
Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241022193130.2733293-3-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Fri, 18 Oct 2024 19:47:39 +0000 (12:47 -0700)]
scsi: ufs: core: Make DMA mask configuration more flexible
Replace UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS with
ufs_hba_variant_ops::set_dma_mask. Update the Renesas driver
accordingly. This patch enables supporting other configurations than
32-bit or 64-bit DMA addresses, e.g. 36-bit DMA addresses.
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241018194753.775074-1-bvanassche@acm.org Reviewed-by: Avri Altman <Avri.Altman@wdc.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avri Altman [Wed, 16 Oct 2024 10:21:41 +0000 (13:21 +0300)]
scsi: ufs: core: Use ufshcd_wait_for_register() in HCE init
The current so called "inner loop" in ufshcd_hba_execute_hce() is open
coding ufshcd_wait_for_register(). Replace it by
ufshcd_wait_for_register(). This is a code simplification - no
functional change.
SEO HOYOUNG [Thu, 10 Oct 2024 07:52:28 +0000 (16:52 +0900)]
scsi: ufs: core: check asymmetric connected lanes
Performance problems may occur if there is a problem with the asymmetric
connected lane such as h/w failure. Currently, only check connected
lane for rx/tx is checked if it is not 0. But it should also be checked
if it is asymmetrically connected.
Merge patch series "scsi: hisi_sas: Some fixes for hisi_sas"
Yihang Li <liyihang9@huawei.com> says:
This series contains some fixes including:
- Adjust priority of registering and exiting debugfs for security;
- Create trigger_dump at the end of the debugfs initialization;
- Add firmware information check;
- Enable all PHYs that are not disabled by user during controller reset;
- Reset PHY again if phyup timeout;
- Check usage count only when the runtime PM status is RPM_SUSPENDING;
- Add cond_resched() for no forced preemption model;
- Default enable interrupt coalescing;
- Update disk locked timeout to 7 seconds;
- Add time interval between two H2D FIS following soft reset spec;
- Update v3 hw STP_LINK_TIMER setting;
- Create all dump files during debugfs initialization;
- Add latest_dump for the debugfs dump;
Yihang Li [Tue, 8 Oct 2024 02:18:22 +0000 (10:18 +0800)]
scsi: hisi_sas: Add latest_dump for the debugfs dump
Before that, after the user triggers the dump, the latest dump
information can be viewed in the directory with the maximum number in
the dump directory.
After this series patch, the driver creates all debugfs directories and
files during initialization. Therefore, users cannot know the directory
where the latest dump information is stored. So, add latest_dump file to
notify users where the latest dump information is stored.
Yihang Li [Tue, 8 Oct 2024 02:18:21 +0000 (10:18 +0800)]
scsi: hisi_sas: Create all dump files during debugfs initialization
For the current debugfs of hisi_sas, after user triggers dump, the
driver allocate memory space to save the register information and create
debugfs files to display the saved information. In this process, the
debugfs files created after each dump.
Therefore, when the dump is triggered while the driver is unbind, the
following hang occurs:
To fix this issue, create all directories and files during debugfs
initialization. In this way, the driver only needs to allocate memory
space to save information each time the user triggers dumping.
At present, it is found that some SATA HDD disks may continue to return
the HOLD primitive for more than 500ms when they are busy writing data,
which is more likely to trigger an STP link timeout exception. Now
Modify STP link timer from 500ms to the maximum value of 1.048575s.
Xingui Yang [Tue, 8 Oct 2024 02:18:18 +0000 (10:18 +0800)]
scsi: hisi_sas: Update disk locked timeout to 7 seconds
The SATA disk will be locked after the disk sends the DMA Setup frame
until all data frame transmission is completed. The
CFG_ICT_TIMER_STEP_TRSH register is used for sata disk to configure the
step size of the timer which records the time when the disk is
locked. The unit is 1us and the default step size is 150ms. If the disk
is locked for more than 7 timer steps, the io to be sent to the disk
will end abnormally.
The current timeout is only about 1 second, it is easy to trigger IO
abnormal end when the SATA hard disk returns data slowly. Adjust the
timeout to 7 seconds based on ERC time of most disks.
Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-10-liyihang9@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Reviewed-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the current interrupt reporting mode, each CQ entry reports an
interrupt. However, when there are a large number of I/O hardware
completion interrupts, the following issue may occur:
When the IRQ management layer processes each hardware interrupt, if the
return value of the interrupt handler is IRQ_WAKE_THREAD, it will wake
up the handler thread for this interrupt action and set IRQTF_RUNTHREAD
flag, wait for the interrupt handling thread to clear the
IRQTF_RUNTHREAD flag after execution. Later in note_interrupt(), use
irq_count to count hardware interrupts and irqs_unhandled to count
interrupts for which no thread handler is responsible. When irq_count
reaches 100000 and irqs_unhandled reaches 99000, irq will be disabled.
In the performance test scenario, I/O completion hardware interrupts are
continuously and quickly generated. As a result, the interrupt
processing thread is cyclically called in irq_thread() and does not
exit, this affects the response of the interrupt thread to the hardware
interrupt and causes irqs_unhandled to grow to 99000. Finally, the irq
is disabled.
Therefore, default enable interrupt coalescing to reduce the generation
of hardware interrupts, this helps interrupt processing threads to stop
calling in irq_thread().
For interrupt coalescing, according to the actual performance test, set
the count of CQ entries to 10 and the interrupt coalescing timeout
period to 10us based on the actual performance test.
Before and after interrupt coalescing is enabled, the 4K read/write
performance is improved by about 3%, and the 256K read/write performance
is basically the same.
Yihang Li [Tue, 8 Oct 2024 02:18:16 +0000 (10:18 +0800)]
scsi: hisi_sas: Add cond_resched() for no forced preemption model
For no forced preemption model kernel, in the scenario where the
expander is connected to 12 high performance SAS SSDs, the following
call trace may occur:
This is because in the hisi_sas driver, both the hardware interrupt
handler and the interrupt thread are executed on the same CPU. In the
performance test scenario, function irq_wait_for_interrupt() will always
return 0 if lots of interrupts occurs and the CPU will be continuously
consumed. As a result, the CPU cannot run the watchdog thread. When the
watchdog time exceeds the specified time, call trace occurs.
To fix it, add cond_resched() to execute the watchdog thread.
The problem is that when the ->runtime_suspend() callback
suspend_v3_hw() is executing, the current runtime PM status is
RPM_ACTIVE and the usage count of the controller is not 0, so return
immediately.
To fix it, Check the device usage count only when the runtime PM status
is RPM_SUSPENDING.
Yihang Li [Tue, 8 Oct 2024 02:18:14 +0000 (10:18 +0800)]
scsi: hisi_sas: Reset PHY again if phyup timeout
In commit 89954f024c3a ("scsi: hisi_sas: Ensure all enabled PHYs up
during controller reset"), we enable PHYs in parallel through async
operations and wait for PHYs come up. However, for some directly
attached SATA disks, the PHY not come up after a timeout period and the
hardware is not ready. At this time, we should get the latest PHY
hardware state, if the new PHY state is not ready but the old PHY state
is ready, call work HISI_PHYE_LINK_RESET to give it another chance to
phyup.
Yihang Li [Tue, 8 Oct 2024 02:18:13 +0000 (10:18 +0800)]
scsi: hisi_sas: Enable all PHYs that are not disabled by user during controller reset
For the controller reset operation(such as FLR or clear nexus ha in SCSI
EH), we will disable all PHYs and then enable PHY based on the
hisi_hba->phy_state obtained in hisi_sas_controller_reset_prepare(). If
the device is removed before controller reset or the PHY is not attached
to any device in directly attached scenario, the corresponding bit of
phy_state is not set. After controller reset done, the PHY is disabled.
The device cannot be identified even if user reconnect the disk.
Therefore, for PHYs that are not disabled by user, hisi_sas_phy_enable()
needs to be executed even if the corresponding bit of phy_state is not
set.
Fixes: 89954f024c3a ("scsi: hisi_sas: Ensure all enabled PHYs up during controller reset") Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-5-liyihang9@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Yihang Li [Tue, 8 Oct 2024 02:18:11 +0000 (10:18 +0800)]
scsi: hisi_sas: Create trigger_dump at the end of the debugfs initialization
In the current debugfs initialization process, the interface
trigger_dump is created first, and then the dump directory is created to
store the register dump information.
The issue is that after the trigger_dump interface is created, users can
access the interface to trigger dump and call
debugfs_create_files_v3_hw(). In debugfs_create_files_v3_hw(), if
.debugfs_dump_dentry is NULL, the file for storing dump information is
created under /sys/kernel/debug, and the memory and information cannot
be released after the driver is uninstalled.
Therefore, the creation of the trigger_dump interface is placed at the
end of debugfs initialization.
Yihang Li [Tue, 8 Oct 2024 02:18:10 +0000 (10:18 +0800)]
scsi: hisi_sas: Adjust priority of registering and exiting debugfs for security
To be safe, we should register debugfs at the last stage of driver
initialization and then unregister debugfs at the first stage of driver
uninstallation.
Hi,
This removes a pile of dead functions in the SCSI bfa driver.
These were spotted by hunting for unused symbols in a unmodular
kernel build, and then double checking by grepping for the function
name.
It's been build tested only, I don't have the hardware, but
it's strictly full function (and the occasional struct) deletion,
so there should be no change in functionality.
Thanks to David Hildenbrand for the suggestion of hunting
for unused symbols.
Add fixup_dev_quirk vops in QCOM UFS platforms and provide an initial
vendor-specific device quirk table to add UFS device specific quirks which
are enabled only for specified UFS devices.
- Add DELAY_BEFORE_LPM quirk for Skhynix UFS devices to introduce a delay
before VCC is powered off in QCOM platforms.
- Add DELAY_AFTER_LPM quirk for Toshiba UFS devices to introduce a delay
after the VCC power rail is turned off in QCOM platforms.
- Move UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE quirk from
ufs_qcom_apply_dev_quirks to ufs_qcom_dev_fixups.
scsi: ufs: core: Zero utp_upiu_req at the beginning of each command
This patch introduces a previously missing step: zeroing the 'utp_upiu_req'
structure at the beginning of each upiu transaction. This ensures that the
upiu request fields are properly initialized, preventing potential issues
caused by residual data from previous commands.
While at it, re-use some of the common initializations for query and
command upiu.
Except for preventing build errors, there shouldn't be any conditionals in
kernel drivers on __GENKSYMS__. Hence remove an #ifndef __GENKSYMS__ / #endif
pair from the MPT Fusion driver.
Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: MPT-FusionLinux.pdl@broadcom.com Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240930201347.1837690-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: ufs: core: Always initialize the UIC done completion
Simplify __ufshcd_send_uic_cmd() by always initializing the
uic_cmd::done completion. This is fine since the time required to
initialize a completion is small compared to the time required to
process an UIC command.
scsi: ufs: core: Make ufshcd_uic_cmd_compl() easier to analyze
In ufshcd_uic_cmd_compl(), there is code that dereferences 'cmd' with
and without checking the 'cmd' pointer. This confuses static source code
analyzers like Coverity and sparse. Since none of the code in
ufshcd_uic_cmd_compl() can do anything useful if 'cmd' is NULL, move the
'cmd' test near the start of this function.
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240912223019.3510966-4-bvanassche@acm.org Reviewed-by: Peter Wang <peter.wang@mediatek.com> Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: ufs: core: Make ufshcd_uic_cmd_compl() easier to read
Introduce a local variable for the expression hba->active_uic_cmd.
Remove superfluous parentheses. No functionality has been changed.
Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240912223019.3510966-3-bvanassche@acm.org Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: ufs: core: Improve the struct ufs_hba documentation
Make the role of the structure members related to UIC command processing
more clear.
Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240912223019.3510966-2-bvanassche@acm.org Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xin Liu [Wed, 11 Sep 2024 07:06:36 +0000 (15:06 +0800)]
scsi: ufs: ufs: qcom: dt-bindings: Document the QCS8300 UFS Controller
Document the Universal Flash Storage(UFS) Controller on the Qualcomm
QCS8300 Platform.
Signed-off-by: Xin Liu <quic_liuxin@quicinc.com> Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com> Link: https://lore.kernel.org/r/20240911-qcs8300_ufs_binding-v2-1-68bb66d48730@quicinc.com Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Kai Huang <kai.huang@intel.com> Cc: Chao Gao <chao.gao@intel.com> Cc: Farrah Chen <farrah.chen@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
Merge tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
Merge tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs
Pull more bcachefs updates from Kent Overstreet:
"Assorted minor syzbot fixes, and for bigger stuff:
Fix two disk accounting rewrite bugs:
- Disk accounting keys use the version field of bkey so that journal
replay can tell which updates have been applied to the btree.
This is set in the transaction commit path, after we've gotten our
journal reservation (and our time ordering), but the
BCH_TRANS_COMMIT_skip_accounting_apply flag that journal replay
uses was incorrectly skipping this for new updates generated prior
to journal replay.
This fixes the underlying cause of an assertion pop in
disk_accounting_read.
- A couple of fixes for disk accounting + device removal.
Checking if acocunting replicas entries were marked in the
superblock was being done at the wrong point, when deltas in the
journal could still zero them out, and then additionally we'd try
to add a missing replicas entry to the superblock without checking
if it referred to an invalid (removed) device.
A whole slew of repair fixes:
- fix infinite loop in propagate_key_to_snapshot_leaves(), this fixes
an infinite loop when repairing a filesystem with many snapshots
- fix incorrect transaction restart handling leading to occasional
"fsck counted ..." warnings
- fix warning in __bch2_fsck_err() for bkey fsck errors
- check_inode() in fsck now correctly checks if the filesystem was
clean
- there shouldn't be pending logged ops if the fs was clean, we now
check for this
- remove_backpointer() doesn't remove a dirent that doesn't actually
point to the inode
- many more fsck errors are AUTOFIX"
* tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: check_subvol_path() now prints subvol root inode
bcachefs: remove_backpointer() now checks if dirent points to inode
bcachefs: dirent_points_to_inode() now warns on mismatch
bcachefs: Fix lost wake up
bcachefs: Check for logged ops when clean
bcachefs: BCH_FS_clean_recovery
bcachefs: Convert disk accounting BUG_ON() to WARN_ON()
bcachefs: Fix BCH_TRANS_COMMIT_skip_accounting_apply
bcachefs: Check for accounting keys with bversion=0
bcachefs: rename version -> bversion
bcachefs: Don't delete unlinked inodes before logged op resume
bcachefs: Fix BCH_SB_ERRS() so we can reorder
bcachefs: Fix fsck warnings from bkey validation
bcachefs: Move transaction commit path validation to as late as possible
bcachefs: Fix disk accounting attempting to mark invalid replicas entry
bcachefs: Fix unlocked access to c->disk_sb.sb in bch2_replicas_entry_validate()
bcachefs: Fix accounting read + device removal
bcachefs: bch_accounting_mode
bcachefs: fix transaction restart handling in check_extents(), check_dirents()
bcachefs: kill inode_walker_entry.seen_this_pos
...
Merge tag 'x86-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix TDX MMIO #VE fault handling, and add two new Intel model numbers
for 'Pantherlake' and 'Diamond Rapids'"
* tag 'x86-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add two Intel CPU model numbers
x86/tdx: Fix "in-kernel MMIO" check
Merge tag 'locking-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"lockdep:
- Fix potential deadlock between lockdep and RCU (Zhiguo Niu)
- Use str_plural() to address Coccinelle warning (Thorsten Blum)
- Add debuggability enhancement (Luis Claudio R. Goncalves)
static keys & calls:
- Fix static_key_slow_dec() yet again (Peter Zijlstra)
- Handle module init failure correctly in static_call_del_module()
(Thomas Gleixner)
- Replace pointless WARN_ON() in static_call_module_notify() (Thomas
Gleixner)
<linux/cleanup.h>:
- Add usage and style documentation (Dan Williams)
rwsems:
- Move is_rwsem_reader_owned() and rwsem_owner() under
CONFIG_DEBUG_RWSEMS (Waiman Long)
atomic ops, x86:
- Redeclare x86_32 arch_atomic64_{add,sub}() as void (Uros Bizjak)
- Introduce the read64_nonatomic macro to x86_32 with cx8 (Uros
Bizjak)"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* tag 'locking-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Move is_rwsem_reader_owned() and rwsem_owner() under CONFIG_DEBUG_RWSEMS
jump_label: Fix static_key_slow_dec() yet again
static_call: Replace pointless WARN_ON() in static_call_module_notify()
static_call: Handle module init failure correctly in static_call_del_module()
locking/lockdep: Simplify character output in seq_line()
lockdep: fix deadlock issue between lockdep and rcu
lockdep: Use str_plural() to fix Coccinelle warning
cleanup: Add usage and style documentation
lockdep: suggest the fix for "lockdep bfs error:-1" on print_bfs_bug
locking/atomic/x86: Redeclare x86_32 arch_atomic64_{add,sub}() as void
locking/atomic/x86: Introduce the read64_nonatomic macro to x86_32 with cx8
Merge tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One urgent fix to vDSO as automated testing is failing due to this
bug"
* tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vDSO: align stack for O2-optimized memcpy
Julia Lawall [Sat, 28 Sep 2024 19:26:22 +0000 (21:26 +0200)]
Reduce Coccinelle choices in string_choices.cocci
The isomorphism neg_if_exp negates the test of a ?: conditional,
making it unnecessary to have an explicit case for a negated test
with the branches inverted.
At the same time, we can disable neg_if_exp in cases where a
different API function may be more suitable for a negated test.
Finally, in the non-patch cases, E matches an expression with
parentheses around it, so there is no need to mention ()
explicitly in the pattern. The () are still needed in the patch
cases, because we want to drop them, if they are present.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Hongbo Li [Wed, 11 Sep 2024 01:09:27 +0000 (09:09 +0800)]
coccinelle: Remove unnecessary parentheses for only one possible change.
The parentheses are only needed if there is a disjunction, ie a
set of possible changes. If there is only one pattern, we can
remove these parentheses. Just like the format:
- x
+ y
not:
(
- x
+ y
)
Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Hongbo Li [Wed, 11 Sep 2024 01:09:18 +0000 (09:09 +0800)]
coccinelle: Add rules to find str_true_false() replacements
After str_true_false() has been introduced in the tree,
we can add rules for finding places where str_true_false()
can be used. A simple test can find over 10 locations.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
Merge tag 's390-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Clean up and improve vdso code: use SYM_* macros for function and
data annotations, add CFI annotations to fix GDB unwinding, optimize
the chacha20 implementation
- Add vfio-ap driver feature advertisement for use by libvirt and
mdevctl
* tag 's390-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Driver feature advertisement
s390/vdso: Use one large alternative instead of an alternative branch
s390/vdso: Use SYM_DATA_START_LOCAL()/SYM_DATA_END() for data objects
tools: Add additional SYM_*() stubs to linkage.h
s390/vdso: Use macros for annotation of asm functions
s390/vdso: Add CFI annotations to __arch_chacha20_blocks_nostack()
s390/vdso: Fix comment within __arch_chacha20_blocks_nostack()
s390/vdso: Get rid of permutation constants
Merge tag 'modules-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"There are a few fixes / cleanups from Vincent, Chunhui, and Petr, but
the most important part of this pull request is the Rust community
stepping up to help maintain both C / Rust code for future Rust module
support. We grow the set of modules maintainers by three now, and with
this hope to scale to help address what's needed to properly support
future Rust module support.
A lot of exciting stuff coming in future kernel releases.
This has been on linux-next for ~ 3 weeks now with no issues"
* tag 'modules-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Refine kmemleak scanned areas
module: abort module loading when sysfs setup suffer errors
MAINTAINERS: scale modules with more reviewers
module: Clean up the description of MODULE_SIG_<type>
module: Split modules_install compression and in-kernel decompression
Merge tag 'fbdev-for-6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- crash fix in fbcon_putcs
- avoid a possible string memory overflow in sisfb
- minor code optimizations in omapfb and fbcon
* tag 'fbdev-for-6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: sisfb: Fix strbuf array overflow
fbcon: break earlier in search_fb_in_map and search_for_mapped_con
fbdev: omapfb: Call of_node_put(ep) only once in omapdss_of_find_source_for_first_ep()
fbcon: Fix a NULL pointer dereference issue in fbcon_putcs
Merge tag 'drm-next-2024-09-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular fixes for the week to end the merge window, i915 and xe have a
few each, amdgpu makes up most of it with a bunch of SR-IOV related
fixes amongst others.
i915:
- Fix BMG support to UHBR13.5
- Two PSR fixes
- Fix colorimetry detection for DP
xe:
- Fix macro for checking minimum GuC version
- Fix CCS offset calculation for some BMG SKUs
- Fix locking on memory usage reporting via fdinfo and BO destroy
- Fix GPU page fault handler on a closed VM
- Fix overflow in oa batch buffer
amdgpu:
- MES 12 fix
- KFD fence sync fix
- SR-IOV fixes
- VCN 4.0.6 fix
- SDMA 7.x fix
- Bump driver version to note cleared VRAM support
- SWSMU fix
- CU occupancy logic fix
- SDMA queue fix"
* tag 'drm-next-2024-09-28' of https://gitlab.freedesktop.org/drm/kernel: (79 commits)
drm/amd/pm: update workload mask after the setting
drm/amdgpu: bump driver version for cleared VRAM
drm/amdgpu: fix vbios fetching for SR-IOV
drm/amdgpu: fix PTE copy corruption for sdma 7
drm/amdkfd: Add SDMA queue quantum support for GFX12
drm/amdgpu/vcn: enable AV1 on both instances
drm/amdkfd: Fix CU occupancy for GFX 9.4.3
drm/amdkfd: Update logic for CU occupancy calculations
drm/amdgpu: skip coredump after job timeout in SRIOV
drm/amdgpu: sync to KFD fences before clearing PTEs
drm/amdgpu/mes12: set enable_level_process_quantum_check
drm/i915/dp: Fix colorimetry detection
drm/amdgpu/mes12: reduce timeout
drm/amdgpu/mes11: reduce timeout
drm/amdgpu: use GEM references instead of TTMs v2
drm/amd/display: Allow backlight to go below `AMDGPU_DM_DEFAULT_MIN_BACKLIGHT`
drm/amd/display: Fix kdoc entry for 'tps' in 'dc_process_dmub_dpia_set_tps_notification'
drm/amdgpu: update golden regs for gfx12
drm/amdgpu: clean up vbios fetching code
drm/amd/display: handle nulled pipe context in DCE110's set_drr()
...
Merge tag 'ceph-for-6.12-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"Three CephFS fixes from Xiubo and Luis and a bunch of assorted
cleanups"
* tag 'ceph-for-6.12-rc1' of https://github.com/ceph/ceph-client:
ceph: remove the incorrect Fw reference check when dirtying pages
ceph: Remove empty definition in header file
ceph: Fix typo in the comment
ceph: fix a memory leak on cap_auths in MDS client
ceph: flush all caps releases when syncing the whole filesystem
ceph: rename ceph_flush_cap_releases() to ceph_flush_session_cap_releases()
libceph: use min() to simplify code in ceph_dns_resolve_name()
ceph: Convert to use jiffies macro
ceph: Remove unused declarations
Merge tag 'v6.12-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- fix querying dentry for char/block special files
- small cleanup patches
* tag 'v6.12-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Correct typos in multiple comments across various files
ksmbd: fix open failure from block and char device file
ksmbd: remove unsafe_memcpy use in session setup
ksmbd: Replace one-element arrays with flexible-array members
ksmbd: fix warning: comparison of distinct pointer types lacks a cast
Merge tag '6.12rc-more-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull xmb client fixes from Steve French:
- Noisy log message cleanup
- Important netfs fix for cifs crash in generic/074
- Three minor improvements to use of hashing (multichannel and mount
improvements)
- Fix decryption crash for large read with small esize
* tag '6.12rc-more-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: make SHA-512 TFM ephemeral
smb: client: make HMAC-MD5 TFM ephemeral
smb: client: stop flooding dmesg in smb2_calc_signature()
smb: client: allocate crypto only for primary server
smb: client: fix UAF in async decryption
netfs: Fix write oops in generic/346 (9p) and generic/074 (cifs)
Alan Huang [Tue, 27 Aug 2024 15:14:48 +0000 (23:14 +0800)]
bcachefs: Fix lost wake up
If the reader acquires the read lock and then the writer enters the slow
path, while the reader proceeds to the unlock path, the following scenario
can occur without the change:
writer: pcpu_read_count(lock) return 1 (so __do_six_trylock will return 0)
reader: this_cpu_dec(*lock->readers)
reader: smp_mb()
reader: state = atomic_read(&lock->state) (there is no waiting flag set)
writer: six_set_bitmask()
then the writer will sleep forever.
Signed-off-by: Alan Huang <mmpgouride@gmail.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Thu, 26 Sep 2024 20:19:58 +0000 (16:19 -0400)]
bcachefs: BCH_FS_clean_recovery
Add a filesystem flag to indicate whether we did a clean recovery -
using c->sb.clean after we've got rw is incorrect, since c->sb is
updated whenever we write the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Sat, 28 Sep 2024 01:05:59 +0000 (21:05 -0400)]
bcachefs: Convert disk accounting BUG_ON() to WARN_ON()
We had a bug where disk accounting keys didn't always have their version
field set in journal replay; change the BUG_ON() to a WARN(), and
exclude this case since it's now checked for elsewhere (in the bkey
validate function).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This was added to avoid double-counting accounting keys in journal
replay. But applied incorrectly (easily done since it applies to the
transaction commit, not a particular update), it leads to skipping
in-mem accounting for real accounting updates, and failure to give them
a version number - which leads to journal replay becoming very confused
the next time around.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Kent Overstreet [Thu, 26 Sep 2024 19:19:17 +0000 (15:19 -0400)]
bcachefs: Don't delete unlinked inodes before logged op resume
Previously, check_inode() would delete unlinked inodes if they weren't
on the deleted list - this code dating from before there was a deleted
list.
But, if we crash during a logged op (truncate or finsert/fcollapse) of
an unlinked file, logged op resume will get confused if the inode has
already been deleted - instead, just add it to the deleted list if it
needs to be there; delete_dead_inodes runs after logged op resume.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
projects / thirdparty / kernel / linux.git / log
