Change the GIT_BUILD_DIR from a path like "/path/to/build/t/.." to
"/path/to/build". The "TEST_DIRECTORY" here is already made an
absolute path a few lines above this.
We could simply do $(cd "$TEST_DIRECTORY"/.." && pwd) here, but as
noted in the preceding commit the "$TEST_DIRECTORY" can't be anything
except the path containing this test-lib.sh file at this point, so we
can more cheaply and equally strip the "/t" off the end.
This change will be helpful to LSAN_OPTIONS which will want to strip
the build directory path from filenames, which we couldn't do if we
had a "/.." in there.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: correct and assert TEST_DIRECTORY overriding
Correct a misleading comment added by me in 62f539043c7 (test-lib:
Allow overriding of TEST_DIRECTORY, 2010-08-19), and add an assertion
that TEST_DIRECTORY cannot point to any directory except the "t"
directory in the top-level of git.git.
This assertion is in effect not new, since we'd already die if that
wasn't the case[1], but it and the updated commentary help to make
that clearer.
The existing comments were also on the wrong arms of the
"if". I.e. the "allow tests to override this" was on the "test -z"
arm. That came about due to a combination of 62f539043c7 and 85176d72513 (test-lib.sh: convert $TEST_DIRECTORY to an absolute path,
2013-11-17).
Those earlier comments could be read as allowing the "$TEST_DIRECTORY"
to be some path outside of t/. As explained in the updated comment
that's impossible, rather it was meant for *tests* that ran outside of
t/, i.e. the "t0000-basic.sh" tests that use "lib-subtest.sh".
Those tests have a different working directory, but they set the
"TEST_DIRECTORY" to the same path for bootstrapping. The comments now
reflect that, and further comment on why we have a hard dependency on
this.
Change our ASAN_OPTIONS and LSAN_OPTIONS to set defaults for those
variables, rather than punting out entirely if we already have them in
the environment.
We want to take any user-provided settings over our own, but we can do
that by prepending our defaults to the variable. The libsanitizer
options parsing has "last option wins" semantics.
It's now possible to do e.g.:
LSAN_OPTIONS=report_objects=1 ./t0006-date.sh
And not have the "report_objects=1" setting overwrite our sensible
default of "abort_on_error=1", but by prepending to the list we ensure
that:
Will take the desired "abort_on_error=0" over our default.
See b0f4c9087e1 (t: support clang/gcc AddressSanitizer, 2014-12-08)
for the original pattern being altered here, and 85b81b35ff9 (test-lib: set LSAN_OPTIONS to abort by default,
2017-09-05) for when LSAN_OPTIONS was added in addition to the
then-existing ASAN_OPTIONS.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 18 Feb 2022 21:53:30 +0000 (13:53 -0800)]
Merge branch 'js/short-help-outside-repo-fix'
"git cmd -h" outside a repository should error out cleanly for many
commands, but instead it hit a BUG(), which has been corrected.
* js/short-help-outside-repo-fix:
t0012: verify that built-ins handle `-h` even without gitdir
checkout/fetch/pull/pack-objects: allow `-h` outside a repository
Junio C Hamano [Fri, 18 Feb 2022 21:53:29 +0000 (13:53 -0800)]
Merge branch 'gc/branch-recurse-submodules'
"git branch" learned the "--recurse-submodules" option.
* gc/branch-recurse-submodules:
branch.c: use 'goto cleanup' in setup_tracking() to fix memory leaks
branch: add --recurse-submodules option for branch creation
builtin/branch: consolidate action-picking logic in cmd_branch()
branch: add a dry_run parameter to create_branch()
branch: make create_branch() always create a branch
branch: move --set-upstream-to behavior to dwim_and_setup_tracking()
Because a deletion of ref would need to remove it from both the
loose ref store and the packed ref store, a delete-ref operation
that logically removes one ref may end up invoking ref-transaction
hook twice, which has been corrected.
* ps/avoid-unnecessary-hook-invocation-with-packed-refs:
refs: skip hooks when deleting uncovered packed refs
refs: do not execute reference-transaction hook on packing refs
refs: demonstrate excessive execution of the reference-transaction hook
refs: allow skipping the reference-transaction hook
refs: allow passing flags when beginning transactions
refs: extract packed_refs_delete_refs() to allow control of transaction
Use an internal call to reset_head() helper function instead of
spawning "git checkout" in "rebase", and update code paths that are
involved in the change.
* pw/use-in-process-checkout-in-rebase:
rebase -m: don't fork git checkout
rebase --apply: set ORIG_HEAD correctly
rebase --apply: fix reflog
reset_head(): take struct rebase_head_opts
rebase: cleanup reset_head() calls
create_autostash(): remove unneeded parameter
reset_head(): make default_reflog_action optional
reset_head(): factor out ref updates
reset_head(): remove action parameter
rebase --apply: don't run post-checkout hook if there is an error
rebase: do not remove untracked files on checkout
rebase: pass correct arguments to post-checkout hook
t5403: refactor rebase post-checkout hook tests
rebase: factor out checkout for up to date branch
"receive-pack" checks if it will do any ref updates (various
conditions could reject a push) before received objects are taken
out of the temporary directory used for quarantine purposes, so
that a push that is known-to-fail will not leave crufts that a
future "gc" needs to clean up.
* cb/clear-quarantine-early-on-all-ref-update-errors:
receive-pack: purge temporary data if no command is ready to run
Junio C Hamano [Fri, 18 Feb 2022 00:25:05 +0000 (16:25 -0800)]
Merge branch 'ab/complete-show-all-commands'
The command line completion script (in contrib/) learned to
complete all Git subcommands, including the ones that are normally
hidden, when GIT_COMPLETION_SHOW_ALL_COMMANDS is used.
* ab/complete-show-all-commands:
completion: add a GIT_COMPLETION_SHOW_ALL_COMMANDS
completion tests: re-source git-completion.bash in a subshell
Junio C Hamano [Fri, 18 Feb 2022 00:25:05 +0000 (16:25 -0800)]
Merge branch 'vd/sparse-clean-etc'
"git update-index", "git checkout-index", and "git clean" are
taught to work better with the sparse checkout feature.
* vd/sparse-clean-etc:
update-index: reduce scope of index expansion in do_reupdate
update-index: integrate with sparse index
update-index: add tests for sparse-checkout compatibility
checkout-index: integrate with sparse index
checkout-index: add --ignore-skip-worktree-bits option
checkout-index: expand sparse checkout compatibility tests
clean: integrate with sparse index
reset: reorder wildcard pathspec conditions
reset: fix validation in sparse index test
"git log" and friends learned an option --exclude-first-parent-only
to propagate UNINTERESTING bit down only along the first-parent
chain, just like --first-parent option shows commits that lack the
UNINTERESTING bit only along the first-parent chain.
* jz/rev-list-exclude-first-parent-only:
git-rev-list: add --exclude-first-parent-only flag
Junio C Hamano [Fri, 18 Feb 2022 00:25:04 +0000 (16:25 -0800)]
Merge branch 'tk/subtree-merge-not-ff-only'
When "git subtree" wants to create a merge, it used "git merge" and
let it be affected by end-user's "merge.ff" configuration, which
has been corrected.
* tk/subtree-merge-not-ff-only:
subtree: force merge commit
Junio C Hamano [Wed, 16 Feb 2022 23:14:30 +0000 (15:14 -0800)]
Merge branch 'js/no-more-legacy-stash'
Removal of unused code and doc.
* js/no-more-legacy-stash:
stash: stop warning about the obsolete `stash.useBuiltin` config setting
stash: remove documentation for `stash.useBuiltin`
add: remove support for `git-legacy-stash`
git-sh-setup: remove remnant bits referring to `git-legacy-stash`
Junio C Hamano [Wed, 16 Feb 2022 23:14:30 +0000 (15:14 -0800)]
Merge branch 'js/diff-filter-negation-fix'
"git diff --diff-filter=aR" is now parsed correctly.
* js/diff-filter-negation-fix:
diff-filter: be more careful when looking for negative bits
diff.c: move the diff filter bits definitions up a bit
docs(diff): lose incorrect claim about `diff-files --diff-filter=A`
Junio C Hamano [Wed, 16 Feb 2022 23:14:30 +0000 (15:14 -0800)]
Merge branch 'en/fetch-negotiation-default-fix'
Interaction between fetch.negotiationAlgorithm and
feature.experimental configuration variables has been corrected.
* en/fetch-negotiation-default-fix:
repo-settings: rename the traditional default fetch.negotiationAlgorithm
repo-settings: fix error handling for unknown values
repo-settings: fix checking for fetch.negotiationAlgorithm=default
Junio C Hamano [Wed, 16 Feb 2022 23:14:29 +0000 (15:14 -0800)]
Merge branch 'en/remerge-diff'
"git log --remerge-diff" shows the difference from mechanical merge
result and the result that is actually recorded in a merge commit.
* en/remerge-diff:
diff-merges: avoid history simplifications when diffing merges
merge-ort: mark conflict/warning messages from inner merges as omittable
show, log: include conflict/warning messages in --remerge-diff headers
diff: add ability to insert additional headers for paths
merge-ort: format messages slightly different for use in headers
merge-ort: mark a few more conflict messages as omittable
merge-ort: capture and print ll-merge warnings in our preferred fashion
ll-merge: make callers responsible for showing warnings
log: clean unneeded objects during `log --remerge-diff`
show, log: provide a --remerge-diff capability
Junio C Hamano [Wed, 16 Feb 2022 23:14:27 +0000 (15:14 -0800)]
Merge branch 'hn/reftable-coverity-fixes'
Problems identified by Coverity in the reftable code have been
corrected.
* hn/reftable-coverity-fixes:
reftable: add print functions to the record types
reftable: make reftable_record a tagged union
reftable: remove outdated file reftable.c
reftable: implement record equality generically
reftable: make reftable-record.h function signatures const correct
reftable: handle null refnames in reftable_ref_record_equal
reftable: drop stray printf in readwrite_test
reftable: order unittests by complexity
reftable: all xxx_free() functions accept NULL arguments
reftable: fix resource warning
reftable: ignore remove() return value in stack_test.c
reftable: check reftable_stack_auto_compact() return value
reftable: fix resource leak blocksource.c
reftable: fix resource leak in block.c error path
reftable: fix OOB stack write in print functions
Junio C Hamano [Sat, 12 Feb 2022 00:56:01 +0000 (16:56 -0800)]
Merge branch 'tg/fetch-prune-exit-code-fix'
When "git fetch --prune" failed to prune the refs it wanted to
prune, the command issued error messages but exited with exit
status 0, which has been corrected.
* tg/fetch-prune-exit-code-fix:
fetch --prune: exit with error if pruning fails
Junio C Hamano [Sat, 12 Feb 2022 00:55:58 +0000 (16:55 -0800)]
Merge branch 'jc/doc-log-messages'
Update the contributor-facing documents on proposed log messages.
* jc/doc-log-messages:
SubmittingPatches: explain why we care about log messages
CodingGuidelines: hint why we value clearly written log messages
SubmittingPatches: write problem statement in the log in the present tense
* ab/no-errno-from-resolve-ref-unsafe:
refs API: remove "failure_errno" from refs_resolve_ref_unsafe()
sequencer: don't use die_errno() on refs_resolve_ref_unsafe() failure
Junio C Hamano [Thu, 10 Feb 2022 02:19:07 +0000 (18:19 -0800)]
glossary: describe "worktree"
We have description on "per worktree ref", but "worktree" is not
described in the glossary. We do have "working tree", though.
Casually put, a "working tree" is what your editor and compiler
interacts with. "worktree" is a mechanism to allow one or more
"working tree"s to be attached to a repository and used to check out
different commits and branches independently, which includes not
just a "working tree" but also repository metadata like HEAD, the
index to support simultaneous use of them. Historically, we used
these terms interchangeably but we have been trying to use "working
tree" when we mean it, instead of "worktree".
Most of the existing references to "working tree" in the glossary do
refer primarily to the working tree portion, except for one that
said refs like HEAD and refs/bisect/* are per "working tree", but it
is more precise to say they are per "worktree".
Junio C Hamano [Wed, 9 Feb 2022 22:21:01 +0000 (14:21 -0800)]
Merge branch 'js/sparse-vs-split-index'
Mark in various places in the code that the sparse index and the
split index features are mutually incompatible.
* js/sparse-vs-split-index:
split-index: it really is incompatible with the sparse index
t1091: disable split index
sparse-index: sparse index is disallowed when split index is active
Junio C Hamano [Wed, 9 Feb 2022 22:21:01 +0000 (14:21 -0800)]
Merge branch 'jt/clone-not-quite-empty'
Cloning from a repository that does not yet have any branches or
tags but has other refs resulted in a "remote transport reported
error", which has been corrected.
* jt/clone-not-quite-empty:
clone: support unusual remote ref configurations
Junio C Hamano [Wed, 9 Feb 2022 22:21:00 +0000 (14:21 -0800)]
Merge branch 'jt/sparse-checkout-leading-dir-fix'
"git sparse-checkout init" failed to write into $GIT_DIR/info
directory when the repository was created without one, which has
been corrected to auto-create it.
* jt/sparse-checkout-leading-dir-fix:
sparse-checkout: create leading directory
Junio C Hamano [Wed, 9 Feb 2022 22:21:00 +0000 (14:21 -0800)]
Merge branch 'ab/config-based-hooks-2'
More "config-based hooks".
* ab/config-based-hooks-2:
run-command: remove old run_hook_{le,ve}() hook API
receive-pack: convert push-to-checkout hook to hook.h
read-cache: convert post-index-change to use hook.h
commit: convert {pre-commit,prepare-commit-msg} hook to hook.h
git-p4: use 'git hook' to run hooks
send-email: use 'git hook run' for 'sendemail-validate'
git hook run: add an --ignore-missing flag
hooks: convert worktree 'post-checkout' hook to hook library
hooks: convert non-worktree 'post-checkout' hook to hook library
merge: convert post-merge to use hook.h
am: convert applypatch-msg to use hook.h
rebase: convert pre-rebase to use hook.h
hook API: add a run_hooks_l() wrapper
am: convert {pre,post}-applypatch to use hook.h
gc: use hook library for pre-auto-gc hook
hook API: add a run_hooks() wrapper
hook: add 'run' subcommand
"git fetch --negotiate-only" is an internal command used by "git
push" to figure out which part of our history is missing from the
other side. It should never recurse into submodules even when
fetch.recursesubmodules configuration variable is set, nor it
should trigger "gc". The code has been tightened up to ensure it
only does common ancestry discovery and nothing else.
* gc/fetch-negotiate-only-early-return:
fetch: help translators by reusing the same message template
fetch --negotiate-only: do not update submodules
fetch: skip tasks related to fetching objects
fetch: use goto cleanup in cmd_fetch()
Junio C Hamano [Wed, 9 Feb 2022 22:20:59 +0000 (14:20 -0800)]
Merge branch 'tl/doc-cli-options-first'
We explain that revs come first before the pathspec among command
line arguments, but did not spell out that dashed options come
before other args, which has been corrected.
* tl/doc-cli-options-first:
git-cli.txt: clarify "options first and then args"
The conditional inclusion mechanism of configuration files using
"[includeIf <condition>]" learns to base its decision on the
URL of the remote repository the repository interacts with.
* jt/conditional-config-on-remote-url:
config: include file if remote URL matches a glob
config: make git_config_include() static
Taylor Blau [Wed, 9 Feb 2022 19:26:47 +0000 (14:26 -0500)]
midx: prevent writing a .bitmap without any objects
When trying to write a MIDX, we already prevent the case where there
weren't any packs present, and thus we would have written an empty MIDX.
But there is another "empty" case, which is more interesting, and we
don't yet handle. If we try to write a MIDX which has at least one pack,
but those packs together don't contain any objects, we will encounter a
BUG() when trying to use the bitmap corresponding to that MIDX, like so:
$ git rev-parse HEAD | git pack-objects --revs --use-bitmap-index --stdout >/dev/null
BUG: pack-revindex.c:394: pack_pos_to_midx: out-of-bounds object at 0
(note that in the above reproduction, both `--use-bitmap-index` and
`--stdout` are important, since without the former we won't even both to
load the .bitmap, and without the latter we wont attempt pack reuse).
The problem occurs when we try to discover the identity of the
preferred pack to determine which range if any of existing packs we can
reuse verbatim. This path is: `reuse_packfile_objects()` ->
`reuse_partial_packfile_from_bitmap()` -> `midx_preferred_pack()`.
#4 0x000055555575401f in pack_pos_to_midx (m=0x555555997160, pos=0) at pack-revindex.c:394
#5 0x00005555557502c8 in midx_preferred_pack (bitmap_git=0x55555599c280) at pack-bitmap.c:1431
#6 0x000055555575036c in reuse_partial_packfile_from_bitmap (bitmap_git=0x55555599c280, packfile_out=0x5555559666b0 <reuse_packfile>,
entries=0x5555559666b8 <reuse_packfile_objects>, reuse_out=0x5555559666c0 <reuse_packfile_bitmap>) at pack-bitmap.c:1452
#7 0x00005555556041f6 in get_object_list_from_bitmap (revs=0x7fffffffcbf0) at builtin/pack-objects.c:3658
#8 0x000055555560465c in get_object_list (ac=2, av=0x555555997050) at builtin/pack-objects.c:3765
#9 0x0000555555605e4e in cmd_pack_objects (argc=0, argv=0x7fffffffe920, prefix=0x0) at builtin/pack-objects.c:4154
Since neither the .bitmap or MIDX stores the identity of the
preferred pack, we infer it by trying to load the first object in
pseudo-pack order, and then asking the MIDX which pack was chosen to
represent that object.
But this fails our bounds check, since there are zero objects in the
MIDX to begin with, which results in the BUG().
We could catch this more carefully in `midx_preferred_pack()`, but
signaling the absence of a preferred pack out to all of its callers is
somewhat awkward.
Instead, let's avoid writing a MIDX .bitmap without any objects
altogether. We catch this case in `write_midx_internal()`, and emit a
warning if the caller indicated they wanted to write a bitmap before
clearing out the relevant flags. If we somehow got to
write_midx_bitmap(), then we will call BUG(), but this should now be an
unreachable path.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: handle unusual characters for sparse-checkout
Update the __gitcomp_directories method to de-quote and handle unusual
characters in directory names. Although this initially involved an attempt
to re-use the logic in __git_index_files, this method removed
subdirectories (e.g. folder1/0/ became folder1/), so instead new custom
logic was placed directly in the __gitcomp_directories method.
Note there are two tests for this new functionality - one for spaces and
accents and one for backslashes and tabs. The backslashes and tabs test
uses FUNNYNAMES to avoid running on Windows. This is because:
1. Backslashes are explicitly not allowed in Windows file paths.
2. Although tabs appear to be allowed when creating a file in a Windows
bash shell, they actually are not renderable (and appear as empty boxes
in the shell).
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Lessley Dennington <lessleydennington@gmail.com> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Lessley Dennington <lessleydennington@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use new __gitcomp_directories method to complete directory names in cone
mode sparse-checkouts. This method addresses the caveat of poor
performance in monorepos from the previous commit (by completing only one
level of directories).
The unusual character caveat from the previous commit will be fixed by the
final commit in this series.
Correct multiple issues with tab completion of the git sparse-checkout
command. These issues were:
1. git sparse-checkout <TAB> previously resulted in an incomplete list of
subcommands (it was missing reapply and add).
2. Subcommand options were not tab-completable.
3. git sparse-checkout set <TAB> and git sparse-checkout add <TAB> showed
both file names and directory names. While this may be a less surprising
behavior for non-cone mode, cone mode sparse checkouts should complete
only directory names.
Note that while the new strategy of just using git ls-tree to complete on
directory names is simple and a step in the right direction, it does have
some caveats. These are:
1. Likelihood of poor performance in large monorepos (as a result of
recursively completing directory names).
2. Inability to handle paths containing unusual characters.
These caveats will be fixed by subsequent commits in this series.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0012: verify that built-ins handle `-h` even without gitdir
We just fixed a class of recently introduced bugs where calling, say,
`git fetch -h` outside a repository would not show the usage but instead
show an ugly `BUG` message.
Let's verify that this does not regress anymore.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout/fetch/pull/pack-objects: allow `-h` outside a repository
When we taught these commands about the sparse index, we did not account
for the fact that the `cmd_*()` functions _can_ be called without a
gitdir, namely when `-h` is passed to show the usage.
A plausible approach to address this is to move the
`prepare_repo_settings()` calls right after the `parse_options()` calls:
The latter will never return when it handles `-h`, and therefore it is
safe to assume that we have a `gitdir` at that point, as long as the
built-in is marked with the `RUN_SETUP` flag.
However, it is unfortunately not that simple. In `cmd_pack_objects()`,
for example, the repo settings need to be fully populated so that the
command-line options `--sparse`/`--no-sparse` can override them, not the
other way round.
Therefore, we choose to imitate the strategy taken in `cmd_diff()`,
where we simply do not bother to prepare and initialize the repo
settings unless we have a `gitdir`.
This fixes https://github.com/git-for-windows/git/issues/3688
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-remote & transport API: release "struct transport_ls_refs_options"
Fix a memory leak in codepaths that use the "struct
transport_ls_refs_options" API. Since the introduction of the struct
in 39835409d10 (connect, transport: encapsulate arg in struct,
2021-02-05) the caller has been responsible for freeing it.
That commit in turn migrated code originally added in 402c47d9391 (clone: send ref-prefixes when using protocol v2,
2018-07-20) and b4be74105fe (ls-remote: pass ref prefixes when
requesting a remote's refs, 2018-03-15). Only some of those codepaths
were releasing the allocated resources of the struct, now all of them
will.
Mark the "t/t5511-refspec.sh" test as passing when git is compiled
with SANITIZE=leak. They'll now be listed as running under the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target). Previously 24/47 tests would fail.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a memory leak that happened when the --path option was
provided. This leak has been with us ever since the option was added
in 39702431500 (add --path option to git hash-object, 2008-08-03).
We can now mark "t1007-hash-object.sh" as passing when git is compiled
with SANITIZE=leak. It'll now run in the the
"GIT_TEST_PASSING_SANITIZE_LEAK=true" test mode (the "linux-leaks" CI
target).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 5 Feb 2022 17:42:32 +0000 (09:42 -0800)]
Merge branch 'ms/update-index-racy'
"git update-index --refresh" has been taught to deal better with
racy timestamps (just like "git status" already does).
* ms/update-index-racy:
update-index: refresh should rewrite index in case of racy timestamps
t7508: add tests capturing racy timestamp handling
t7508: fix bogus mtime verification
test-lib: introduce API for verifying file mtime
Junio C Hamano [Sat, 5 Feb 2022 17:42:31 +0000 (09:42 -0800)]
Merge branch 'ab/cat-file'
Assorted updates to "git cat-file", especially "-h".
* ab/cat-file:
cat-file: s/_/-/ in typo'd usage_msg_optf() message
cat-file: don't whitespace-pad "(...)" in SYNOPSIS and usage output
cat-file: use GET_OID_ONLY_TO_DIE in --(textconv|filters)
object-name.c: don't have GET_OID_ONLY_TO_DIE imply *_QUIETLY
cat-file: correct and improve usage information
cat-file: fix remaining usage bugs
cat-file: make --batch-all-objects a CMDMODE
cat-file: move "usage" variable to cmd_cat_file()
cat-file docs: fix SYNOPSIS and "-h" output
parse-options API: add a usage_msg_optf()
cat-file tests: test messaging on bad objects/paths
cat-file tests: test bad usage
Junio C Hamano [Sat, 5 Feb 2022 17:42:31 +0000 (09:42 -0800)]
Merge branch 'jc/qsort-s-alignment-fix'
Fix a hand-rolled alloca() imitation that may have violated
alignment requirement of data being sorted in compatibility
implementation of qsort_s() and stable qsort().
* jc/qsort-s-alignment-fix:
stable-qsort: avoid using potentially unaligned access
compat/qsort_s.c: avoid using potentially unaligned access
Junio C Hamano [Sat, 5 Feb 2022 17:42:30 +0000 (09:42 -0800)]
Merge branch 'rs/apply-symlinks-use-strset'
"git apply" (ab)used the util pointer of the string-list to keep
track of how each symbolic link needs to be handled, which has been
simplified by using strset.
* rs/apply-symlinks-use-strset:
apply: use strsets to track symlinks
Junio C Hamano [Sat, 5 Feb 2022 17:42:30 +0000 (09:42 -0800)]
Merge branch 'rs/grep-expr-cleanup'
Code clean-up.
* rs/grep-expr-cleanup:
grep: use grep_and_expr() in compile_pattern_and()
grep: extract grep_binexp() from grep_or_expr()
grep: use grep_not_expr() in compile_pattern_not()
grep: use grep_or_expr() in compile_pattern_or()
* jh/p4-spawning-external-commands-cleanup:
git-p4: don't print shell commands as python lists
git-p4: pass command arguments as lists instead of using shell
git-p4: don't select shell mode using the type of the command argument
Junio C Hamano [Sat, 5 Feb 2022 17:42:28 +0000 (09:42 -0800)]
Merge branch 'pb/pull-rebase-autostash-fix'
"git pull --rebase" ignored the rebase.autostash configuration
variable when the remote history is a descendant of our history,
which has been corrected.
* pb/pull-rebase-autostash-fix:
pull --rebase: honor rebase.autostash when fast-forwarding
t0051: use "skip_all" under !MINGW in single-test file
Have this file added in 06ba9d03e34 (t0051: test GIT_TRACE to a
windows named pipe, 2018-09-11) use the same "skip_all" pattern as an
existing Windows-only test added in 0e218f91c29 (mingw: unset PERL5LIB
by default, 2018-10-30) uses.
This way TAP consumers like "prove" will show a nice summary when the
test is skipped. Instead of:
$ prove t0051-windows-named-pipe.sh
[...]
t0051-windows-named-pipe.sh .. ok
[...]
This is because we are now making use of the right TAP-y way to
communicate this to the consumer. I.e. skipping the whole test file,
v.s. skipping individual tests (in this case there's only one test).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Glen Choo [Sat, 29 Jan 2022 00:04:45 +0000 (16:04 -0800)]
branch: add --recurse-submodules option for branch creation
To improve the submodules UX, we would like to teach Git to handle
branches in submodules. Start this process by teaching "git branch" the
--recurse-submodules option so that "git branch --recurse-submodules
topic" will create the `topic` branch in the superproject and its
submodules.
Although this commit does not introduce breaking changes, it does not
work well with existing --recurse-submodules commands because "git
branch --recurse-submodules" writes to the submodule ref store, but most
commands only consider the superproject gitlink and ignore the submodule
ref store. For example, "git checkout --recurse-submodules" will check
out the commits in the superproject gitlinks (and put the submodules in
detached HEAD) instead of checking out the submodule branches.
Because of this, this commit introduces a new configuration value,
`submodule.propagateBranches`. The plan is for Git commands to
prioritize submodule ref store information over superproject gitlinks if
this value is true. Because "git branch --recurse-submodules" writes to
submodule ref stores, for the sake of clarity, it will not function
unless this configuration value is set.
This commit also includes changes that support working with submodules
from a superproject commit because "branch --recurse-submodules" (and
future commands) need to read .gitmodules and gitlinks from the
superproject commit, but submodules are typically read from the
filesystem's .gitmodules and the index's gitlinks. These changes are:
* add a submodules_of_tree() helper that gives the relevant
information of an in-tree submodule (e.g. path and oid) and
initializes the repository
* add is_tree_submodule_active() by adding a treeish_name parameter to
is_submodule_active()
* add the "submoduleNotUpdated" advice to advise users to update the
submodules in their trees
Incidentally, fix an incorrect usage string that combined the 'list'
usage of git branch (-l) with the 'create' usage; this string has been
incorrect since its inception, a8dfd5eac4 (Make builtin-branch.c use
parse_options., 2007-10-07).
Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Glen Choo <chooglen@google.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: add a GIT_COMPLETION_SHOW_ALL_COMMANDS
Add a GIT_COMPLETION_SHOW_ALL_COMMANDS=1 configuration setting to go
with the existing GIT_COMPLETION_SHOW_ALL=1 added in c099f579b98 (completion: add GIT_COMPLETION_SHOW_ALL env var,
2020-08-19).
This will include plumbing commands such as "cat-file" in "git <TAB>"
and "git c<TAB>" completion. Without/with this I have 134 and 243
completion with git <TAB>, respectively.
It was already possible to do this by tweaking
GIT_TESTING_PORCELAIN_COMMAND_LIST= from the outside, that testing
variable was added in 84a97131065 (completion: let git provide the
completable command list, 2018-05-20). Doing this before loading
git-completion.bash worked:
But such testing variables are not meant to be used from the outside,
and we make no guarantees that those internal won't change. So let's
expose this as a dedicated configuration knob.
It would be better to teach --list-cmds=* a new category which would
include all of these groups, but that's a larger change that we can
leave for some other time.
completion tests: re-source git-completion.bash in a subshell
Change tests of git-completion.bash that re-source it to do so inside
a subshell. Re-sourcing it will clobber variables it sets, and in the
case of the "GIT_COMPLETION_SHOW_ALL=1" test added in ca2d62b7879 (parse-options: don't complete option aliases by default,
2021-07-16) change the behavior of the completion persistently.
Aside from the addition of "(" and ")" on new lines this is an
indentation-only change, only the "(" and ")" lines are changed under
"git diff -w".
So let's change that test, and for good measure do the same for the
three tests that precede it, which were added in 8b0eaa41f23 (completion: clear cached --options when sourcing the
completion script, 2018-03-22). The may not be wrong, but doing this
establishes a more reliable pattern for future tests, which might use
these as a template to copy.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Wed, 2 Feb 2022 06:43:00 +0000 (14:43 +0800)]
t/lib-read-tree-m-3way: indent with tabs
As Documentation/CodingGuidelines says, our shell scripts
(including tests) are to use HT for indentation, but this script
uses 4-column indent with SP. Fix this.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Wed, 2 Feb 2022 06:42:59 +0000 (14:42 +0800)]
t/lib-read-tree-m-3way: modernize style
Many invocations of the test_expect_success command in this
file are written in old style where the command, an optional
prerequisite, and the test title are written on separate
lines, and the executable script string begins on its own
line, and these lines are pasted together with backslashes
as necessary.
An invocation of the test_expect_success command in modern
test scripts however writes the prerequisite and the title
on the same line as the test_expect_success command itself,
and ends the line with a single quote that begins the
executable script string.
Update the style for uniformity.
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shaoxuan Yuan [Wed, 2 Feb 2022 07:28:44 +0000 (15:28 +0800)]
builtin/diff.c: fix "git-diff" usage string typo
Remove mistaken right square brackets from "git-diff"
usage string. Make the usage string conform to "git-diff"
documentation (Documentation/git-diff.txt).
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jerry Zhang [Wed, 2 Feb 2022 04:19:45 +0000 (20:19 -0800)]
patch-id: fix scan_hunk_header on diffs with 1 line of before/after
Normally diffs will contain a hunk header of the format
"@@ -2,2 +2,15 @@ code". However when there is only 1 line of
change, the unified diff format allows for the second comma
separated value to be omitted in either before or after
line counts.
This can produce hunk headers that look like
"@@ -2 +2,18 @@ code" or "@@ -2,2 +2 @@ code".
As a result, scan_hunk_header mistakenly returns the line
number as line count, which then results in unpredictable
parsing errors with the rest of the patch, including giving
multiple lines of output for a single commit.
Fix by explicitly setting line count to 1 when there is
no comma, and add a test.
apply.c contains this same logic except it is correct. A
worthwhile future project might be to unify these two diff
parsers so they both benefit from fixes.
Signed-off-by: Jerry Zhang <jerry@skydio.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jerry Zhang [Wed, 2 Feb 2022 04:20:15 +0000 (20:20 -0800)]
patch-id: fix antipatterns in tests
Clean up the tests for patch-id by moving file preparation
tasks inside the test body and redirecting files directly into
stdin instead of using 'cat'.
Signed-off-by: Jerry Zhang <jerry@skydio.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 2 Feb 2022 02:37:37 +0000 (02:37 +0000)]
diff-merges: avoid history simplifications when diffing merges
Doing diffs for merges are special; they should typically avoid history
simplification. For example, with
git log --diff-merges=first-parent -- path
the default history simplification would remove merge commits from
consideration if the file "path" matched the second parent. That is
counter to what the user wants when looking for first-parent diffs.
Similar comments can be made for --diff-merges=separate (which diffs
against both parents) and --diff-merges=remerge (which diffs against a
remerge of the merge commit).
However, history simplification still makes sense if not doing diffing
merges, and it also makes sense for the combined and dense-combined
forms of diffing merges (because both of those are defined to only show
a diff when the merge result at the relevant paths differs from *both*
parents).
So, for separate, first-parent, and remerge styles of diff-merges, turn
off history simplification.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 2 Feb 2022 02:37:36 +0000 (02:37 +0000)]
merge-ort: mark conflict/warning messages from inner merges as omittable
A recursive merge involves merging the merge bases of the two branches
being merged. Such an inner merge can itself generate conflict notices.
While such notices may be useful when initially trying to create a
merge, they seem to just be noise when investigating merges later with
--remerge-diff. (Especially when both sides of the outer merge resolved
the conflict the same way leading to no overall conflict.) Remove them.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 2 Feb 2022 02:37:35 +0000 (02:37 +0000)]
show, log: include conflict/warning messages in --remerge-diff headers
Conflicts such as modify/delete, rename/rename, or file/directory are
not representable via content conflict markers, and the normal output
messages notifying users about these were dropped with --remerge-diff.
While we don't want these messages randomly shown before the commit
and diff headers, we do want them to still be shown; include them as
part of the diff headers instead.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 2 Feb 2022 02:37:34 +0000 (02:37 +0000)]
diff: add ability to insert additional headers for paths
When additional headers are provided, we need to
* add diff_filepairs to diff_queued_diff for each paths in the
additional headers map which, unless that path is part of
another diff_filepair already found in diff_queued_diff
* format the headers (colorization, line_prefix for --graph)
* make sure the various codepaths that attempt to return early
if there are "no changes" take into account the headers that
need to be shown.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
