QUIC TXP: Make TXP use time callback correctly

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)

QUIC APL: Correct implementation of time callback override

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)

QUIC RX: Support reporting the key epoch a packet was received with

This is needed to support key update validation on the receive side.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)

QUIC TXP: Allow callbacks on ACK transmission

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)

QUIC TXP: Allow next PN to be used to be queried

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)

QUIC RX: Refactor key update callback to provide PN

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)

QUIC TXP: Remove TX key update handling from TXP

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)

QUIC TXP: Refactor status output to use an extensible structure

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)

QUIC ACKM: Allow largest acked PN to be queried

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)

QUIC WIRE: Utility function to determine if PN is in an ACK frame

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)

QUIC Glossary: TXKU, RXKU, KU

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21029)

apps/ca.c: Handle EVP_PKEY_get_default_digest_name() returning 1 with "UNDEF"

EVP_PKEY_get_default_digest_name() may return 1 with the returned digest
name "UNDEF".  This case hasn't been documented, and the meaning has been
left undefined, until now.

Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20460)

Partially revert #18070 (Add support for Windows CA certificate store)

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21190)

OpenSSL::paramnames: Use less magic perl

Constructions like $$cursor{whatever} and %$cursor{whatever} were ambiguous
in some perl versions, and it's still better to use the arrow syntax for the
way we use them, i.e. they can both be replaced with $cursor->{whatever}.

Fixes #21152
Fixes #21172

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21178)

Fix typos found by codespell

Typos in doc/man* will be fixed in a different commit.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20910)

fips: update DSA security check to fix legacy verify strengths

Refer SP 800-131Ar2 table 2:
    https://csrc.nist.gov/publications/detail/sp/800-131a/rev-2/final

Fixes #21185

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21186)

updated (lib+)oqsprovider to latest releases

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21194)

Only take note of the ack deadline if we can actually issue an ack

When determining the next tick deadline we cannot actually issue an
ack if the CC will not let us, or the enc_level is not yet provisioned.

This avoids a bug where we can end up in a busy loop because the next
event deadline is reported as "now" because we want to send an ack, but
we can't actually send anything yet.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21181)

cmactest.c: Fix no-des and no-sm4 build failures

Also use OSSL_NELEM instead of hardcoding array size.

Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21183)

fips: use memory ordering rather than locks

The FIPS provider accesses it's current state under lock.
This is overkill, little or no synchronisation is actually required in
practice (because it's essentially a read only setting).  Switch to using
TSAN operations in preference.

Fixes #21179

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21187)

Fix minor issues in the demo/man pages for TLS client/blocking

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21133)

Split the blocking TLS client guide page into two

We split the page into two: one covering basic TLS introductory material
that applies to both clients and servers, and one with the specific
material on writing a blocking TLS client.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21133)

Allow man7 pages to not have a DESCRIPTION section

For tutorial type pages it doesn't make any sense to have a DESCRIPTION
section.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21133)

Add a tutorial on writing a simple blocking TLS client

Provide guidance on the steps needed to write a very simple blocking TLS
client.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21133)

Add a very simple blocking TLS client demo

This blocking client is intended to be used to explain how to implement
a simple client in the documentation.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21133)

configure: introduce no-ecx to remove ECX related feature

This can effectively reduce the binary size for platforms
that don't need ECX feature(~100KB).

Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20781)

rand_lib: RAND_poll: Reseed in non-"no-deprecated" builds.

In a non-"no-deprecated" libcrypto build with a default configuration,
RAND_get_rand_method() == RAND_OpenSSL() and so needs to fall through to
the RAND_seed call (used in "no-deprecated" builds) to perform a reseed.

CLA: trivial

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21167)

crypto/sm2/sm2_sign.c: Add BN_CTX_end

To match the BN_CTX_start, it should be better to add
BN_CTX_end in the end of the function.

Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19266)

X509_NAME_cmp fix for empty name

CLA: trivial

Fixes #21156

Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21155)

Update CMAC test cases.

    1. Update cmac test cases, fullfilling test data by short string
       instead of using long string directly.
    2. Modify the wording of comments in cmac.c

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21177)

INSTALL: document shared library pinning for static builds

The libcrypto library uses shared library pinning to prevent its
cleanup handlers from crashing at program termination because of a
premature unloading of the shared library.

However, shared library pinning is enabled also for static builds,
which may lead to surpising behaviour if libcrypto is linked
statically to a shared third-party library, because in this case
the third-party library gets pinned.

This surprising behaviour is caused by the fact that the `no-shared`
configure option does not imply `no-pinshared`. Since this quirk
can't be changed without potentially breaking existing code, we just
document it here and provide a workaround.

Fixes #20977

Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20985)

Fix incorrect ERR_raise() calls

A few ERR_raise() calls in v3_purp.c use the wrong library. For example,
in OpenSSL 3.1.1 we get

00000000:error:0580009E:x509 certificate routines:ossl_x509v3_cache_extensions:reason(158):crypto/x509/v3_purp.c:635:

instead of

00000000:error:1100009E:X509 V3 routines:ossl_x509v3_cache_extensions:invalid certificate:crypto/x509/v3_purp.c:635:

Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21168)

add cygwin CI

Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21006)

Fix build on cygwin

Fixes #19531

Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21006)

Introduce [HAVE_/NO_]MADVISE defines

Toolchains that target a non-MMU architecture may not have the `madvise`
function available, even if the `sys/mman.h` header provides a define
for `MADV_DONTDUMP` (e.g. when targeting ARMv7-M with uClibc). The
following tweaks the implementation to use `HAVE_MADVISE`/`NO_MADVISE`
defines to help indicate when to attempt to use `madvise`. This change
operates in the same manner as the original implementation (i.e. relies
on `MADV_DONTDUMP` to indicate if `madvise` can be used); however, this
change now allows a builder to override the internal detection by
explicitly providing the `HAVE_MADVISE` define at compile time. This
should give flexibility for environments which do not have `madvise`
when there is no easy logic to set `NO_MADVISE`.

Signed-off-by: James Knight <james.d.knight@live.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20851)

riscv: aes: dual-license under Apache + 2-clause BSD

To allow re-use of the already reviewed openSSL crypto code for RISC-V in
other projects - like the Linux kernel, add a second license (2-clause BSD)
to the 32+64bit aes implementations using the Zkn extension.

Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21018)

riscv: GCM: dual-license under Apache + 2-clause BSD

To allow re-use of the already reviewed openSSL crypto code for RISC-V in
other projects - like the Linux kernel, add a second license (2-clause BSD)
to the recently added GCM ghash functions.

Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/20649)

Coverity 1528485: Remove unused assignment of wvalue

wvalue is always initialized at the beginning of each cycle
and used only within the cycle

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21145)

Coverity 1528486: Avoid assignment of unused value of bags

It is used only within the loop and always initialized

Coverity 1528487: Avoid assignment of unused value of i

Coverity 1528488: Avoid assignment of unused value rctx

Also some move redirection_url inside loop
where it is only used.

Coverity 1528490: Avoid assignment of unused value of i

It is used only within the loop and initialized at the beginning

Coverity 1528492: Fix possible memory leak if t == NULL

Coverity 1528494 and 1528493: Remove unused assignment of wvalue

wvalue is always initialized at the beginning of each cycle
and used only within the cycle

Coverity 1528496: remove assignment of unused value

ctx is used only within the loop and always assigned at start

Coverity 1529992: Check return value of sscanf()

Also moving the call to setup_tests() where it
fits better.

Coverity 1531836: Check return value of CRYPTO_atomic_add()

Coverity 1531872: j is not used anywhere later, remove the assignment

Include poll.h instead of incorrect sys/poll.h

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Anton Arapov <anton@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21131)

Fix failures of OS Zoo CI

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Anton Arapov <anton@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21131)

Set RC4 defines on libcrypto/liblegacy

Also add missing prototype for rc4_md5_enc.

Fixes #21150

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21153)

Cast the argument to unsigned char when calling isspace()

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21151)

util/find-doc-nits: extend regex to match new OPT_INFORM A

Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7320)

apps/asn1parse: improve RFC7462 compliance

The asn1parse command now supports three different input formats:

     openssl asn1parse -inform PEM|DER|B64

       PEM: base64 encoded data enclosed by PEM markers (RFC7462)
       DER: der encoded binary data
       B64: raw base64 encoded data

The PEM input format is the default format. It is equivalent
to the former `-strictpem` option which is now marked obsolete
and kept for backward compatibility only.

The B64 is equivalent to the former default input format of the
asn1parse command (without `-strictpem`)

Fixes #7317

Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7320)

apps/opt: refactor input format parsing

- split OPT_FMT_PEMDER flag into OPT_FMT_PEM and OPT_FMT_DER
- add OPT_FMT_B64 option (`-inform b64`)

Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7320)

Optimize CMAC_Update for better performance.

    Reduce the number of EVP_Cipher function calls in CMAC_Update,
    to improve performance of CMAC.
    Below are command and result of performance improvement.

    COMMAND: openssl speed -cmac ALGORITHM

    IMPROVEMENT(%):
    A72   stands for Cortex A72
    N1    stands for Neoverse N1
    N2    stands for Neoverse N2
                        A72 N1 N2 x86
    aes-128-cbc@256 65.4 54.6 37.9 86.6
    aes-128-cbc@1024 156.0 105.6 65.8 197.1
    aes-128-cbc@8192 237.7 139.2 80.5 285.8
    aes-128-cbc@16384 249.1 143.5 82.2 294.1
    aes-192-cbc@256 65.6 46.5 30.9 77.8
    aes-192-cbc@1024 154.2 87.5 50.8 167.4
    aes-192-cbc@8192 226.5 117.0 60.5 231.7
    aes-192-cbc@16384 236.3 120.1 61.7 238.4
    aes-256-cbc@256 66.0 40.3 22.2 69.5
    aes-256-cbc@1024 136.8 74.6 35.7 142.2
    aes-256-cbc@8192 189.7 93.5 41.5 191.7
    aes-256-cbc@16384 196.6 95.8 42.2 195.9
    des-ede3-cbc@64 6.9 4.4 2.9 7.2
    des-ede3-cbc@256 9.3 6.1 4.3 13.1
    des-ede3-cbc@1024 10.0 6.4 4.8 14.9
    des-ede3-cbc@8192 10.3 6.5 5.1 15.5
    des-ede3-cbc@16384 10.3 6.4 5.1 15.5
    sm4-cbc@256 9.5 3.0 - 18.0
    sm4-cbc@1024 12.3 3.6 - 24.6
    sm4-cbc@8192 13.2 3.8 - 27.0
    sm4-cbc@16384 13.5 3.8 - 27.2

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21102)

Update CMAC cipher algorithm list and test cases.

    1. Update manual, add SM4-CBC to CMAC cipher algorithm list.
    2. Add test case for SM4-CBC CMAC, add "data length is greater
       than 4 block-length" cases for aes-128-cbc, aes-192-cbc,
       aes-256-cbc and des-ede3-cbc.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21102)

Add 3.0.9 to list of FIPS releases

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21140)

Update versions tested to include 3.1.1

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21140)

kdf test: restrict the version of the FIPS provider

Concatenation tests are provider version specific, limit them to supporting
versions.

Fixes #21134

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21140)

Workaround false positive warning of MSAN in eng_rdrand.c

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21136)

Bump coverallsapp/github-action from 2.1.2 to 2.2.0

Bumps [coverallsapp/github-action](https://github.com/coverallsapp/github-action) from 2.1.2 to 2.2.0.
- [Release notes](https://github.com/coverallsapp/github-action/releases)
- [Commits](https://github.com/coverallsapp/github-action/compare/v2.1.2...v2.2.0)

---
updated-dependencies:
- dependency-name: coverallsapp/github-action
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
CLA: trivial

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21147)

build.info: Introduce special syntax for dependencies on script modules

The DEPEND statement, when applied on files generated with GENERATE, may
be used to specify script modules that the template to be generated from
depends on.  In short, this sort of depend:

    DEPEND[generated]=util/perl/OpenSSL/something.pm

... would generate a perl run that has the inclusion directory
'util/perl/OpenSSL' and 'something' as the module to be loaded.  However,
the package name for this module is 'OpenSSL::something', so to load it the
way it's expected, the inclusion directory should be 'util/perl', and the
module to be loaded should be specified as 'OpenSSL/something' (to be
massaged into a proper module name by the build file template).

To allow this, we introduce a file syntax, where a single '|' is used as a
directory separator, to delineate what part should be used as the inclustion
directory, and which part the module name to be loaded should be derived
from:

    DEPEND[generated]=util/perl|OpenSSL/something.pm

Fixes #21112

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21117)

Modify ENGINE_pkey_asn1_find_str() to use a read lock instead of a write

ENGINE_pkey_asn1_find_str() does not make any modifications to fields
controlled by the global_engine_lock. The only change made is the struct_ref
field which is controlled separately. Therefore we can afford to only take
a read lock. This also impacts EVP_PKEY_asn1_find_str().

This lock ends up being obtained indirectly from numerous public API
functions including EVP_PKEY_key_gen(), EVP_PKEY_new_raw_public_key_ex(),
EVP_PKEY_copy_parameters() etc. This occurs even if no engines are actually
in use.

Some tests showed this lock being obtained 6 times after a "warmed up"
s_server instance with default configuration processed a handshake from a
default s_client. When processing a resumption handshake from s_client it
was obtained 8 times.

Partially fixes #20286

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20950)

Convert the ENGINE struct_ref field to be an atomic

We use atomic primitives to up ref and down the struct_ref field rather
than relying on the global lock for this.

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20950)

Add SSL_get0_group_name() to  get name of the group used for KEX

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20866)

Cast the argument to unsigned char when calling isdigit()

Fixes #21123

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21127)

Make link to RFC 1578 in CHANGES.md be a proper link

Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21130)

Restrict the size of OBJECT IDENTIFIERs that OBJ_obj2txt will translate

OBJ_obj2txt() would translate any size OBJECT IDENTIFIER to canonical
numeric text form.  For gigantic sub-identifiers, this would take a very
long time, the time complexity being O(n^2) where n is the size of that
sub-identifier.

To mitigate this, a restriction on the size that OBJ_obj2txt() will
translate to canonical numeric text form is added, based on RFC 2578
(STD 58), which says this:

> 3.5. OBJECT IDENTIFIER values
>
> An OBJECT IDENTIFIER value is an ordered list of non-negative numbers.
> For the SMIv2, each number in the list is referred to as a sub-identifier,
> there are at most 128 sub-identifiers in a value, and each sub-identifier
> has a maximum value of 2^32-1 (4294967295 decimal).

Fixes otc/security#96
Fixes CVE-2023-2650

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>

allow to disable http

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21108)

doc: note that out ChaCha20 isn't standard compliant.

Fixes #21095

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/21098)

Don't take a write lock to retrieve a value from a stack

ossl_x509_store_ctx_get_by_subject() was taking a write lock for the
store, but was only (usually) retrieving a value from the stack of
objects. We take a read lock instead.

Partially fixes #20286

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20952)

Avoid an unneccessary lock if we didn't add anything to the store

Partially fixes #20286

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20952)

Remove pointless warning on pkcs12 import

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21107)

Update fuzz/corpora submodule to latest data

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21118)

Fix documentation where openssl-genrsa is listed as
deprecated since OpenSSL 3.0

openssl-genrsa is not deprecated however the OpenSSL documentation
states that it is the case from OpenSSL 3.0. This has been fixed in the
documentation, specifically in manpage 1.

Fixes #21055

CLA: trivial

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21059)

possible workaround

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20935)

Update .gitignore

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20935)

gcm: use the new faster param location mechanism.

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20935)

params: provide a faster TRIE based param lookup.

The separate file is a Perl script that generates the appropriate define
directives for inclusion in core_names.h.  By having this separation it
will be possible to prebuild data structures to give faster access when
looking up parameters by name.

Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20935)

[feat] SSL RTT in both client and server statem. SSL_get_handshake_rtt makes it available

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/20248)

Avoid taking a write lock in ossl_provider_doall_activated()

We refactor ossl_provider_doall_activated() so that we only need to take
a read lock instead of a write lock for the flag_lock. This should improve
performance by avoiding the lock contention. We achieve this by protecting
the activatecnt via atomics rather than via a lock and by avoiding the full
provider activation/deactivation procedure where it is not needed.

Partial fix for #20286

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20927)

Enable obtaining certain DRBG params without a lock

Even if a DRBG has locking enabled on it, there are certain parameters
which are still safe to obtain even without a lock. The max_request
value is constant for all our DRBGs. The reseed_counter does not matter
if we get it wrong - so it is safe to avoid the lock. So if all we are
reading are those parameters then we take no lock at all.

Partially fixes #20286

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20970)

Refactor the DRBG implementations to manage locking themselves

Previously the EVP layer would call lock and unlock functions on the
underlying DRBG implementation to say when a lock should be acquired and
released. This gives the DRBG implementation no say as to what kind of
lock should obtained (e.g. read/write) or even whether a lock is actually
needed or not.

In reality we know whether a DRBG is supposed to be in locking mode or
not because the "enable_locking()" function will have been called if
locks should be used. Therefore we re-interpret the lock and unlock
functions as "hints" from the EVP layer which we ignore. Instead we
acquire locks only when we need them. By knowing the context we can obtain
either a read or a write lock as appropriate.

This may mean that in some rare cases we acquire the locks more than once
for a single EVP call, if the EVP call makes several calls to the underlying
DRBG. But in practice almost all EVP calls only make one such call.
EVP_RAND_generate() is an example of a call where multiple DRBG calls may
be made. One of these gets the "max_request" parameter (which is constant
for all of our own DRBGs) and it may make several calls to the DRBG generate
call - but only if the requested size is very large which will rarely be
the case.

Partially fixes #20286

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20970)

openssl-cmp.pod.in: tweak doc of -subject, -issuer, -keep_alive, and -untrusted

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21086)

cmp_mock_srv.c: improve comment on cert to be produced from request template

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21086)

cmp_client.c: add comment on certConf and add 'ossl_unused' to two functions

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21086)

apps.c: add comment to do_X509_sign() referring to question #19805

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21086)

apps/cmp.c: make management of http_cb_arg pointer more robust

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21086)

apps/cmp.c: improve warnings on option use

Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21086)

CMS_ContentInfo_free(): fix mem leak on encrypted content key

Fixes #21026

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21058)

SMIME_crlf_copy(): check for NULL pointer arguments

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21058)

Ignore the fetch error when a legacy algorithm is found

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/21035)

(cherry picked from commit cb1f87f59d0b290eca9207ec4ef36d8073e6feec)

CMP: add support for genm/genp messages with id-it-caCerts

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/19231)

QUIC: CID conformance

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21078)

doc: update FIPS provider version information

With 3.0.8 validated, we need to note this in the documentation.

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: David von Oheimb <david.von.oheimb@siemens.com>
(Merged from https://github.com/openssl/openssl/pull/21049)

tags: fix `make tags` target for out of tree builds

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Todd Short <todd.short@me.com>
(Merged from https://github.com/openssl/openssl/pull/21079)

Add PEM fuzzer

This fuzzer can find CVE-2022-4450

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20242)

Compute RSA-PSS algorithm params in libcrypto for legacy

Fixes regression of RSA signatures for legacy keys caused
by quering the provider for the algorithm id with parameters.

Legacy keys do not have a method that would create the
algorithm id. So we revert to what was done in 3.0.7 and
earlier versions for these keys.

Fixes #21008

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21019)

Fix arm64 asm code back compatible issue with gcc 4.9.4

Fix: #20963

Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/20967)