Tom Tromey [Thu, 10 May 2018 22:23:44 +0000 (16:23 -0600)]
Remove some unneeded psymtab initializations
allocate_psymtab has long cleared the new psymtab that is returned.
This patch documents this behavior and then removes some redundant
initializations.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_end_psymtab): Remove some initializations.
* psymtab.c (allocate_psymtab): Add comment.
* psympriv.h (allocate_psymtab): Add comment.
* dwarf2read.c (dwarf2_create_include_psymtab): Remove some
initializations.
* dbxread.c (dbx_end_psymtab): Remove some initializations.
Remove support for demangling GCC 2.x era mangling schemes.
* cplus-dem.c: Remove cplus_mangle_opname, cplus_demangle_opname,
internal_cplus_demangle, and all subroutines.
(libiberty_demanglers): Remove entries for ancient GNU (pre-3.0),
Lucid, ARM, HP, and EDG demangling styles.
(cplus_demangle): Remove 'work' variable. Don't call
internal_cplus_demangle.
include * Merge from GCC:
2018-12-22 Jason Merrill <jason@redhat.com>
* demangle.h: Remove support for ancient GNU (pre-3.0), Lucid,
ARM, HP, and EDG demangling styles.
Tom Tromey [Sat, 24 Nov 2018 18:54:26 +0000 (11:54 -0700)]
Remove ALL_OBJSECTIONS
This removes the ALL_OBJSECTIONS macro, replacing its uses with ranged
for loops.
The special code in this macro for noticing a "break" from the inner
loop was only needed in a single place; so rather than try to
replicate this, I've simply replaced that use with a "goto".
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symfile.c (overlay_invalidate_all, find_pc_overlay)
(find_pc_mapped_section, list_overlays_command)
(map_overlay_command, unmap_overlay_command)
(simple_overlay_update): Use all_objfiles.
* spu-tdep.c (spu_overlay_update): Use all_objfiles.
* printcmd.c (info_symbol_command): Use all_objfiles.
* objfiles.h (ALL_OBJSECTIONS): Remove.
* maint.c (maintenance_translate_address): Use all_objfiles.
* gcore.c (gcore_create_callback): Use all_objfiles.
(objfile_find_memory_regions): Likewise.
Tom Tromey [Sat, 24 Nov 2018 16:00:42 +0000 (09:00 -0700)]
Remove ALL_OBJFILE_COMPUNITS
This removes ALL_OBJFILE_COMPUNITS, replacing its uses with ranged for
loops. Because ALL_COMPUNITS is also updated, in some places a
declaration must be deleted to avoid shadowing.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
Tom Tromey [Fri, 23 Nov 2018 19:20:05 +0000 (12:20 -0700)]
Remove most uses of ALL_OBJFILES
This removes most uses of ALL_OBJFILES, replacing them with ranged for
loops. The remaining uses are all in macros, and will be removed in
subsequent patches.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (iterate_over_symtabs, matching_obj_sections)
(expand_symtab_containing_pc, lookup_static_symbol)
(basic_lookup_transparent_type, find_pc_sect_compunit_symtab)
(find_symbol_at_address, find_line_symtab, find_main_name): Use
all_objfiles.
* probe.c (find_probe_by_pc, collect_probes): Use all_objfiles.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Use all_objfiles.
* linux-thread-db.c (try_thread_db_load_from_pdir)
(has_libpthread): Use all_objfiles.
* ada-lang.c (add_nonlocal_symbols): Use all_objfiles.
* linespec.c (iterate_over_all_matching_symtabs)
(search_minsyms_for_name): Use all_objfiles.
* maint.c (maintenance_info_sections): Use all_objfiles.
* main.c (captured_main_1): Use all_objfiles.
* spu-tdep.c (spu_objfile_from_frame): Use all_objfiles.
* guile/scm-objfile.c (gdbscm_objfiles): Use all_objfiles.
* guile/scm-pretty-print.c
(ppscm_find_pretty_printer_from_objfiles): Use all_objfiles.
* solib-spu.c (append_ocl_sos): Use all_objfiles.
* symmisc.c (maintenance_print_symbols): Use all_objfiles.
(maintenance_print_msymbols): Use all_objfiles.
* source.c (select_source_symtab): Use all_objfiles.
* jit.c (jit_find_objf_with_entry_addr): Use all_objfiles.
* symfile.c (remove_symbol_file_command)
(expand_symtabs_matching, map_symbol_filenames): Use
all_objfiles.
* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Use
all_objfiles.
* dwarf2-frame.c (dwarf2_frame_find_fde): Use all_objfiles.
* objc-lang.c (find_methods): Use all_objfiles.
* objfiles.c (have_partial_symbols, have_full_symbols)
(have_minimal_symbols, qsort_cmp)
(default_iterate_over_objfiles_in_search_order): Use
all_objfiles.
* hppa-tdep.c (find_unwind_entry): Use all_objfiles.
* psymtab.c (maintenance_print_psymbols): Use all_objfiles.
(maintenance_check_psymtabs): Use all_objfiles.
(ALL_PSYMTABS): Remove.
* compile/compile-object-run.c (do_module_cleanup): Use
all_objfiles.
* blockframe.c (find_pc_partial_function): Use all_objfiles.
* cp-support.c (add_symbol_overload_list_qualified): Use
all_objfiles.
* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
Use all_objfiles.
* dwarf-index-write.c (save_gdb_index_command): Use all_objfiles.
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Use
all_objfiles.
* python/py-objfile.c (objfpy_lookup_objfile_by_name)
(objfpy_lookup_objfile_by_build_id): Use all_objfiles.
* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
Uses all_objfiles.
* solib.c (solib_read_symbols): Use all_objfiles
Tom Tromey [Fri, 15 Jun 2018 05:12:16 +0000 (22:12 -0700)]
Introduce all_objfiles and next_iterator
This introduces an iterable object which can be used to iterate over
objfiles. It also introduces a generic "next_iterator", which can be
used to iterate over types that have a "next" field.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
John Darrington [Fri, 4 Jan 2019 08:44:58 +0000 (09:44 +0100)]
S12Z: Don't crash when disassembling invalid instructions.
Check for null before dereferencing an operand pointer. Normally
this situation should never arise, but could happen if a "partial"
instruction is encountered at the end of a file or section.
opcodes/
* s12z-dis.c (print_insn_s12z): Do not dereference an
operand if it is null.
John Darrington [Mon, 31 Dec 2018 07:48:10 +0000 (07:48 +0000)]
S12Z: Fix disassembly of indexed OPR operands with zero index.
gas/
* testsuite/gas/s12z/jsr.s: New case.
* testsuite/gas/s12z/jsr.d: New case.
opcodes/
* s12z-dis.c (opr_emit_disassembly): Do not omit an index if it is
zero.
Simon Marchi [Wed, 9 Jan 2019 17:57:16 +0000 (12:57 -0500)]
gdb: Remove support for old mangling schemes
An upcoming sync with gcc's libiberty [1] will remove support for old
mangling schemes (GNU v2, Lucid, ARM, HP and EDG). It will remove the
cplus_demangle_opname function, so we need to get rid of its usages in
GDB (it's a GNU v2 specific function).
I think the changes are mostly relatively obvious, some hacks that were
necessary to support overloaded operators with GNU v2 mangling are not
needed anymore.
The change in stabsread.c is perhaps less obvious. I think we could get
rid of more code in that region that is specific to old mangling
schemes, but I chose to do only the minimal changes required to remove
the cplus_demangle_opname uses. There is also a detailed comment just
above that explaining how GNU v2 and v3 mangled symbols are handled, I
decided to leave it as-is, since I wasn't sure which part to remove,
change or leave there.
[1] The commit "Remove support for demangling GCC 2.x era mangling
schemes.", specifically.
gdb/ChangeLog:
* gdbtypes.c (check_stub_method_group): Remove handling of old
mangling schemes.
* linespec.c (find_methods): Likewise.
* stabsread.c (read_member_functions): Likewise.
* valops.c (search_struct_method): Likewise.
(value_struct_elt_for_reference): Likewise.
* NEWS: Mention this change.
gdb/testsuite/ChangeLog:
* gdb.cp/demangle.exp (test_gnu_style_demangling): Rename to...
(test_gnuv3_style_demangling): ... this.
(test_lucid_style_demangling): Remove.
(test_arm_style_demangling): Remove.
(test_hp_style_demangling): Remove.
(do_tests): Remove calls to the above.
gdb/doc/ChangeLog:
* gdb.texinfo (Print Settings): Remove mention of specific
demangle-style values, just refer to the in-process help.
Andrew Burgess [Mon, 7 Jan 2019 07:26:35 +0000 (07:26 +0000)]
gdb: Avoid signed integer overflow when printing source lines
When printing source lines with calls to print_source_lines we need to
pass a start line number and an end line number. The end line number
is calculated by calling get_lines_to_list and adding this value to
the start line number. For example this code from list_command:
print_source_lines (cursal.symtab, first,
first + get_lines_to_list (), 0);
The problem is that get_lines_to_list returns a value based on the
GDB setting `set listsize LISTSIZE`. By default LISTSIZE is 10,
however, its also possible to set LISTSIZE to unlimited, in which
case get_lines_to_list will return INT_MAX.
As the parameter signature for print_source_lines is:
and `first` in the above code is an `int`, then when LISTSIZE is
`unlimited` the above code will result in signed integer overflow,
which is undefined.
The solution in this patch is a new class source_lines_range that can
be constructed from a single line number and a direction (forward or
backward). The range is then constructed from the line number and the
value of get_lines_to_list.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Pass a source_lines_range to
print_source_lines.
* source.c (print_source_lines_base): Update line number check.
(print_source_lines): New function.
(source_lines_range::source_lines_range): New function.
* source.h (class source_lines_range): New class.
(print_source_lines): New declaration.
Andrew Burgess [Thu, 3 Jan 2019 21:13:52 +0000 (21:13 +0000)]
gdb/testsuite: Remove interactive prompt case from mi_gdb_test
I noticed that when running this test:
make check-gdb RUNTESTFLAGS="--target_board=native-gdbserver gdb.mi/mi-break.exp"
I would occasionally see some UNRESOLVED test results like this:
(gdb)
PASS: gdb.mi/mi-break.exp: mi-mode=separate: breakpoint at main
Expecting: ^(kill[
]+)?(.*[
]+[(]gdb[)]
[ ]*)
kill
&"kill\n"
~"Kill the program being debugged? (y or n) [answered Y; input not from terminal]\n"
=thread-group-exited,id="i1"
ERROR: Got interactive prompt.
UNRESOLVED: gdb.mi/mi-break.exp: mi-mode=separate:
The problem appears to be that the expect buffer fills up to include
the '(y or n)' prompt without including the following lines.
The pattern supplied by the outer test script is looking for the
following lines. As the following lines are not present then expect
matches on the interactive prompt case rather than the case for the
user supplied pattern.
The problem with this is that we are not really at an interactive
prompt, GDB is providing an answer for us and then moving on. When I
examine a successful run of the test the output from GDB is identical,
the only difference is where expect happens to buffer the output from
GDB.
This patch remove all special handling of the interactive prompt
case. This means that if we ever break GDB and start seeing an
unexpected interactive prompt then tests will rely on a timeout to
fail, instead of having dedicated interactive prompt detection, but
this solves the problem that an auto-answered prompt looks very
similar to an interactive prompt.
With this patch in place I can now leave the following loop running
indefinitely, where before it would fail usually after ~10
iterations.
while make check-gdb RUNTESTFLAGS="--target_board=native-gdbserver gdb.mi/mi-break.exp"; \
do /bin/true; \
done
Valgrind reports a leak in many tests, such as:
==9382== 16 bytes in 1 blocks are definitely lost in loss record 236 of 3,282
==9382== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309)
==9382== by 0x4197AF: xrealloc (common-utils.c:64)
==9382== by 0x51D16A: xresizevec<linespec_canonical_name> (poison.h:170)
==9382== by 0x51D16A: add_sal_to_sals(linespec_state*, std::vector<symtab_and_line, std::allocator<symtab_and_line> >*, symtab_and_line*, char const*, int) (linespec.c:1041)
==9382== by 0x51E2BF: create_sals_line_offset (linespec.c:2215)
==9382== by 0x51E2BF: convert_linespec_to_sals(linespec_state*, linespec*) (linespec.c:2358)
==9382== by 0x521B5D: convert_explicit_location_to_sals (linespec.c:2473)
Fix leak by xfree-ing self->canonical_names in linespec_state_destructor.
The leak probably appeared with the patch 'Remove cleanup from linespec.c',
as there was a cleanup to xfree canonical_names before the patch.
Tested on Debian/amd64, native and under valgrind.
2019-01-09 Philippe Waroquiers <philippe.waroquiers@skynet.be>
Tom Tromey [Sun, 6 Jan 2019 16:49:11 +0000 (09:49 -0700)]
Fix build failure with macOS bison
PR gdb/24060 points out a compilation failure of the C, Fortran and Pascal
parsers when they are built using the macOS system bison. The bug is a name
clash between the VARIABLE token name and the VARIABLE enumerator in ui-out.h.
This patch renames VARIABLE in c-exp.y, f-exp.y and p-exp.y to DOLLAR_VARIABLE
to avoid the clash. It also renames similar variables in other .y files so
that all languages use the same name.
gdb/ChangeLog
2019-01-07 Tom Tromey <tom@tromey.com>
2019-01-07 Simon Marchi <simon.marchi@ericsson.com>
PR gdb/24060:
* ada-exp.y (DOLLAR_VARIABLE): Rename from SPECIAL_VARIABLE.
* ada-lex.l (DOLLAR_VARIABLE): Likewise.
* c-exp.y (DOLLAR_VARIABLE): Rename from VARIABLE.
* f-exp.y (DOLLAR_VARIABLE): Likewise.
* m2-exp.y (DOLLAR_VARIABLE): Rename from INTERNAL_VAR.
* p-exp.y (DOLLAR_VARIABLE): Rename from VARIABLE.
Nick Clifton [Tue, 8 Jan 2019 16:53:02 +0000 (16:53 +0000)]
Remove support for old gnu v2 name mangling.
PR 24044
* cxxfilt.c (hp_symbol_characters): Delete.
(main): Remove depcreated demangling styles.
* stabs.c (parse_stab_argtypes): Remove support for old gnu v2
demangling opnames.
* testsuite/binutils-all/cxxfilt.exp: Use the
--no-strip-underscore option for targets that do prefix their
symbols with underscores.
Update tests to elimiate those that use gnu v2 encoding.
Kyrylo Tkachov [Tue, 8 Jan 2019 15:18:32 +0000 (15:18 +0000)]
[AArch64][gas] Add -mcpu support for Arm Ares
This adds support for the Arm Ares CPU for AArch64.
It implements the Armv8.2-A architecture with the optional features
of statistical profiling, dot product and FP16 on by default.
Note: Ares is a codename to enable early adopters and in time
we will add the final product name once it's announced.
Andrew Burgess [Mon, 7 Jan 2019 09:16:16 +0000 (09:16 +0000)]
gdb: Move declarations from symtab.h to source.h
Declarations for functions in source.c are split between source.h and
symtab.h. This commit moves the small number that are in symtab.h
into source.h. There's just one file that needs to add an include of
source.h in order to build.
I've moved the function header comments from source.c to source.h
inline with the recommended GDB style.
gdb/ChangeLog:
* source.c (select_source_symtab): Move header comment to
declaration in source.h.
(forget_cached_source_info_for_objfile): Likewise.
(forget_cached_source_info): Likewise.
(identify_source_line): Likewise.
* source.h (identify_source_line): Move declaration from symtab.h
and add comment from source.c
(print_source_lines): Likewise.
(forget_cached_source_info_for_objfile): Likewise.
(forget_cached_source_info): Likewise.
(select_source_symtab): Likewise.
(enum print_source_lines_flag): Move definition from symtab.h.
* symtab.h (identify_source_line): Move declaration to source.h.
(print_source_lines): Likewise.
(forget_cached_source_info_for_objfile): Likewise.
(forget_cached_source_info): Likewise.
(select_source_symtab): Likewise.
(enum print_source_lines_flag): Move definition to source.h.
* tui/tui-hooks.c: Add 'source.h' include.
introduced a regression in the test gdb.linespec/explicit.exp, in
which a request is made to GDB to print a reverse sequence of lines,
from +10 to -10 from the current line number. The expected behaviour
is that GDB prints nothing. The above commit changed this so that GDB
now prints:
Line number 32 out of range; /path/to/gdb/testsuite/gdb.linespec/explicit.c has 71 lines.
which is a little confusing.
This commit fixes the regression, and restores the behaviour that GDB
prints nothing.
While I was passing I noticed a call to `back` on a std::string that I
was concerned could be empty if the request for source lines returns
an empty string. I don't know if it would be possible for a request
for lines to return an empty string, I guess it should be impossible,
in which case, maybe this should be an assertion, but adding a `empty`
check, seems like an easy and cheap safety net.
gdb/ChangeLog:
* source.c (print_source_lines_base): Handle requests to print
reverse line number sequences, and guard against empty lines
string.
Alan Modra [Tue, 8 Jan 2019 06:17:52 +0000 (16:47 +1030)]
run_dump_test source in build directory
Some existing tests build .s and .d files for run_dump_test, using an
absolute #source: line in the .d file. This patch changes that scheme
a little to instead use "#source: ./..." in .d files rather than
"#source: $objdir/...", which is more useful in cases where the .d
file is not generated.
This allows RX gas test files to be built in the build directory,
rather than in a source directory (which might be read-only).
Simon Marchi [Mon, 7 Jan 2019 23:05:36 +0000 (18:05 -0500)]
Revert "Sync libiberty sources with master version in gcc repository. Updated stabs demangling and cxxfilt tests to match."
The previous commit breaks the GDB build, which is still using functions
cplus_demangle_opname & co. Since removing these usages is not an
obvious fix, let's revert this patch until we get rid of them.
Nick Clifton [Mon, 7 Jan 2019 13:18:53 +0000 (13:18 +0000)]
Sync libiberty sources with master version in gcc repository. Updated stabs demangling and cxxfilt tests to match.
PR 24044
* stabs.c (parse_stab_argtypes): Remove call to
cplus_mangle_opcode.
* testsuite/binutils-all/cxxfilt.exp: Replace tests of v2 encoding
with v3 encoding. Add escape for known failures.
Kyrylo Tkachov [Mon, 7 Jan 2019 09:22:55 +0000 (09:22 +0000)]
[arm][gas] Add -mcpu support for Arm Ares
This adds support for the Arm Ares CPU in the arm port.
It implements the Armv8.2-A architecture with the relevant optional
features
of dot product and FP16 on by default.
Note: Ares is a codename to enable early adopters and in time
we will add the final product name once it's announced.
Tom Tromey [Thu, 3 Jan 2019 02:12:32 +0000 (19:12 -0700)]
Use std::vector in type stacks
This removes the use of VEC from parse.c and, at the same time,
removes some related cleanups from c-exp.y.
gdb/ChangeLog
2019-01-06 Tom Tromey <tom@tromey.com>
* parser-defs.h (type_ptr): Remove typedef. Don't declare VEC.
(union type_stack_elt) <typelist_val>: Now a pointer to
std::vector.
(type_stack_cleanup): Don't declare.
(push_typelist): Update.
* parse.c (pop_typelist): Return a std::vector.
(push_typelist): Take a std::vector.
(follow_types): Update. Do not free args.
(type_stack_cleanup): Remove.
* c-exp.y (struct c_parse_state): New.
(cpstate): New global.
(type_aggregate_p, exp, ptr_operator, parameter_typelist)
(nonempty_typelist): Update.
(func_mod): Create a new vector.
(c_parse): Create a c_parse_state.
(check_parameter_typelist): Do not delete params.
(function_method): Update. Do not delete type_list.
Tom Tromey [Sat, 29 Dec 2018 17:46:07 +0000 (10:46 -0700)]
Fix crash in "finish"
PR gdb/28155 notes a crash in "finish" that occurs with a particular
source file compiled by clang.
The bug is the typical gdb problem of a missing call to check_typedef.
clang emits a function whose return type is a typedef to void.
get_return_value asserts that the return type is not void, but the
callers were not using check_typedef first.
gdb/ChangeLog
2019-01-06 Tom Tromey <tom@tromey.com>
PR gdb/28155:
* python/py-finishbreakpoint.c (bpfinishpy_init): Use
check_typedef.
* infcmd.c (finish_command_fsm_should_stop): Use check_typedef.
(print_return_value): Likewise.
gdb/testsuite/ChangeLog
2019-01-06 Tom Tromey <tom@tromey.com>
PR gdb/28155:
* gdb.dwarf2/typedef-void-finish.exp: New file.
Tom Tromey [Mon, 24 Dec 2018 21:56:03 +0000 (14:56 -0700)]
Remove the exception and cleanup checkers
Now that gdb is transitioning away from cleanups, there is no reason
to keep the cleanup and exception checker scripts around. This patch
removes them.
gdb/ChangeLog
2019-01-05 Tom Tromey <tom@tromey.com>
Joel Brobecker [Sat, 5 Jan 2019 07:55:08 +0000 (11:55 +0400)]
GDB crash re-running program on Windows (native)
Running any program twice on Windows current results in GDB crashing:
$ gdb -q any_program
(gdb) run
$ gdb dummy -batch -ex run -ex run
[New Thread 684960.0xe5878]
[New Thread 684960.0xd75ac]
[New Thread 684960.0xddac8]
[New Thread 684960.0xc1f50]
[Thread 684960.0xd75ac exited with code 0]
[Thread 684960.0xddac8 exited with code 0]
[Thread 684960.0xc1f50 exited with code 0]
[Inferior 1 (process 684960) exited normally]
(gdb) run
Segmentation fault
The crash happens while processing the CREATE_PROCESS_DEBUG_EVENT
for the second run; in particular, we have in get_windows_debug_event:
| case CREATE_PROCESS_DEBUG_EVENT:
| [...]
| if (main_thread_id)
| windows_delete_thread (ptid_t (current_event.dwProcessId, 0,
| main_thread_id),
| 0);
The problem is that main_thread_id is the TID of the main thread from
the *previous* inferior, and this code is trying to delete that
thread. The problem is that it is constructing a PTID by pairing
the TID of the previous inferior with the PID of the new inferior.
As a result, when we dig inside windows_delete_thread to see
how it would handle that, we see...
| delete_thread (find_thread_ptid (ptid));
Since the PTID is bogus, we end up calling delete_thread with
a NULL thread_info. It used to be harmless, turning the delete_thread
into a nop, but the following change...
| commit 080363310650c93ad8e93018bcb6760ba5d32d1c
| Date: Thu Nov 22 16:09:14 2018 +0000
| Subject: Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc.
... changed delete_thread to get the list of threads from
the inferior, which itself is now accessed via the given
thread_info. This is the corresponding diff that shows the change:
As a result of this, passing a NULL thread_info is no longer
an option!
Stepping back a bit, the reason behind deleting the thread late
could be found in a patch from Dec 2003, which laconically explains:
| commit 87a45c96062d658ca83b50aa060a648bf5f5f1ff
| Date: Fri Dec 26 00:39:04 2003 +0000
|
| * win32-nat.c (get_child_debug_event): Keep main thread id around
| even after thread exits since Windows insists on continuing to
| report events against it.
A look at the gdb-patches archives did not provide any additional
clues (https://www.sourceware.org/ml/gdb-patches/2003-12/msg00478.html).
It is not clear whether this is still needed or not. This patch
assumes that whatever isue there was, the versions of Windows
we currently support no longer have it.
With that in mind, this commit fixes the issue by deleting the thread
when the inferior sends the exit-process event as opposed to deleting it
later, while starting a new inferior.
This also restores the printing of the thread-exit notification for
the main thread, which was missing before. Looking at the transcript
of the example shown above, we can see 4 thread creation notifications,
and only 3 notifications for thread exits. Now creation and exit
notifications are balanced.
In the handling of EXIT_THREAD_DEBUG_EVENT, the main_thread_id
check is removed because deemed unnecessary: The main thread was
introduced by a CREATE_PROCESS_DEBUG_EVENT, and thus the kernel
is expected to report its death via EXIT_PROCESS_DEBUG_EVENT.
And finally, because the behavior of delete_thread did change
(albeit when getting a value we probably never expected to receive),
this patch also adds a gdb_assert. The purpose is to provide some
immediate information in case there are other callers that mistakenly
call delete_thread with a NULL thread info. This can be useful
information when direct debugging of GDB isn't an option.
gdb/ChangeLog:
* thread.c (delete_thread_1): Add gdb_assert that THR is not
NULL. Initialize tpprev to NULL instead of assigning it
to NULL on the next statement.
* windows-nat.c (windows_delete_thread): Remove check for
main_thread_id before printing thread exit notifications.
(get_windows_debug_event) <EXIT_THREAD_DEBUG_EVENT>:
Remove thread ID check against main_thread_id.
<CREATE_PROCESS_DEBUG_EVENT>: Remove call to
windows_delete_thread.
<EXIT_PROCESS_DEBUG_EVENT>: Add call to windows_delete_thread.
Tom Tromey [Mon, 24 Dec 2018 21:41:40 +0000 (14:41 -0700)]
Use upper case for more metasyntactic variables in gdb
I noticed a few places where a Usage line in gdb did not use upper
case for metasyntactic variables. This patch fixes all the instances
I found.
Tested on x86-64 Fedora 28.
gdb/ChangeLog
2019-01-04 Tom Tromey <tom@tromey.com>
* compile/compile.c (_initialize_compile): Use upper case for
metasyntactic variables.
* symmisc.c (_initialize_symmisc): Use upper case for
metasyntactic variables.
* psymtab.c (_initialize_psymtab): Use upper case for
metasyntactic variables.
* demangle.c (demangle_command): Use upper case for metasyntactic
variables.
(_initialize_demangler): Likewise.
* ax-gdb.c (_initialize_ax_gdb): Use upper case for metasyntactic
variables.
Nick Clifton [Fri, 4 Jan 2019 12:11:51 +0000 (12:11 +0000)]
Fix ridiculously small memory leak.
PR 24001
* objcopy.c (copy_object): Free dhandle after writing out the
debug information.
* objdump.c (dump_bfd): Free dhandle after printing out the debug
information.
Tom Tromey [Thu, 27 Dec 2018 19:16:06 +0000 (12:16 -0700)]
Avoid questionable casts in py-symtab.c
py-symtab.c has some questionable casts of Py_None to symtab_object*.
This patch avoids these casts by instead using downcasts at the
appropriate places.
gdb/ChangeLog
2019-01-03 Tom Tromey <tom@tromey.com>
* python/py-symtab.c (salpy_str): Update.
(struct salpy_sal_object) <symtab>: Now a PyObject.
(salpy_dealloc): Update.
(del_objfile_sal): Use gdbpy_ref.
Tom Tromey [Thu, 27 Dec 2018 18:57:28 +0000 (11:57 -0700)]
Simplify gdbpy_stop_recording
This simplifies gdbpy_stop_recording, by having it use Py_RETURN_NONE
rather than writing it out manually, and by usin the idiomatic
GDB_PY_HANDLE_EXCEPTION.
gdb/ChangeLog
2019-01-03 Tom Tromey <tom@tromey.com>
* python/py-record.c (gdbpy_stop_recording): Use Py_RETURN_NONE.
Tom Tromey [Thu, 27 Dec 2018 18:53:20 +0000 (11:53 -0700)]
Remove more uses of explicit reference counting in Python
This changes some more place in the Python code to use gdbpy_ref
rather than explicit reference counting. While doing this I found a
latent bug in typy_fields_items -- it was not checking for errors in
one spot. I also changed valpy_dealloc to use Py_XDECREF rather than
an explicit "if".
gdb/ChangeLog
2019-01-03 Tom Tromey <tom@tromey.com>
* python/py-value.c (valpy_dealloc): Use Py_XDECREF.
* python/py-type.c (typy_fields_items): Use gdbpy_ref.
* python/py-progspace.c (pspy_set_printers): Use gdbpy_ref.
(pspy_set_frame_filters, pspy_set_frame_unwinders)
(pspy_set_type_printers): Likewise.
* python/py-function.c (fnpy_init): Use gdbpy_ref.
* python/py-cmd.c (cmdpy_init): Use gdbpy_ref.
* python/py-objfile.c (objfpy_set_printers): Use gdbpy_ref.
(objfpy_set_frame_filters, objfpy_set_frame_unwinders)
(objfpy_set_type_printers): Likewise.
Tom Tromey [Thu, 27 Dec 2018 18:32:01 +0000 (11:32 -0700)]
Use a wrapper for PyErr_Fetch
This introduces a new class that wraps PyErr_Fetch and PyErr_Restore,
and then changes all the callers in gdb to use it. This reduces the
amount of explicit reference counting that is done in the Python code.
I also found and fixed a latent bug in gdbpy_print_stack -- it was not
correctly checking some error conditions, nor clearing the exception
when needed.
gdb/ChangeLog
2019-01-03 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_enter, ~gdbpy_enter): Update.
(gdbpy_print_stack): Use gdbpy_err_fetch.
* python/python-internal.h (class gdbpy_err_fetch): New class.
(class gdbpy_enter) <m_error_type, m_error_value,
m_error_traceback>: Remove.
<m_error>: New member.
(gdbpy_exception_to_string): Don't declare.
* python/py-varobj.c (py_varobj_iter_next): Use gdbpy_err_fetch.
* python/py-value.c (convert_value_from_python): Use
gdbpy_err_fetch.
* python/py-utils.c (gdbpy_err_fetch::to_string): Rename from
gdbpy_exception_to_string.
(gdbpy_handle_exception): Use gdbpy_err_fetch.
* python/py-prettyprint.c (print_stack_unless_memory_error): Use
gdbpy_err_fetch.
Andrew Burgess [Mon, 31 Dec 2018 22:20:56 +0000 (22:20 +0000)]
gdb: Remove cleanup from linux_nat_target::follow_fork
Remove cleanup from linux_nat_target::follow_fork, instead add a new
unique_ptr specialisation for holding lwp_info pointers and use this
to ensure the pointer is cleaned up when needed.
gdb/ChangeLog:
* linux-nat.c (delete_lwp_cleanup): Delete.
(struct lwp_deleter): New struct.
(lwp_info_up): New typedef.
(linux_nat_target::follow_fork): Delete cleanup, and make use of
lwp_info_up.
Andrew Burgess [Mon, 31 Dec 2018 17:41:38 +0000 (17:41 +0000)]
gdb: Remove a cleanup from find_overload_match
This patch changes cp-support.c:cp_func_name to return a
'gdb::unique_xmalloc_ptr<char>' instead of a 'char *'. This allows a
cleanup to be removed from valops.c:find_overload_match.
gdb/ChangeLog:
* compile/compile-cplus-types.c
(compile_cplus_instance::decl_name): Handle changes to
cp_func_name.
* cp-support.c (cp_func_name): Update header comment, update
return type.
* cp-support.h (cp_func_name): Update return type in declaration.
* valops.c (find_overload_match): Move temp_func local to top
level of function and change its type. Use temp_func to hold and
delete temporary string obtained from cp_func_name.
Jim Wilson [Thu, 3 Jan 2019 19:12:17 +0000 (11:12 -0800)]
RISC-V: Fix wrong use of s0 register name.
s0 is listed as both an int register name and an FP register name. The FP reg
name is wrong. This looks like a simple editting error, and has an easy fix.
Tested with riscv64-linux build and check, with no regressions.
gdb/
* riscv-tdep.c (riscv_freg_feature): Drop s0 name from f8.
John Darrington [Thu, 3 Jan 2019 17:30:40 +0000 (18:30 +0100)]
S12Z: opcodes: Separate the decoding of operations from their display.
This change adds an abstraction layer between the decoding of machine
operations and their disassembled textual representation. This allows
the decoding routines to be re-used for other purposes (at the expense)
of slightly slower running time.
ChangeLog: opcodes/
* s12z-opc.c: New file.
* s12z-opc.h: New file.
* s12z-dis.c: Removed all code not directly related to display
of instructions. Used the interface provided by the new files
instead.
* Makefile.am (TARGET_LIBOPCODES_CFILES) Add s12z-opc.c.
* Makefile.in: regenerate.
* configure.ac (bfd_s12z_arch): Correct the dependencies.
* configure: regenerate.
Tom Tromey [Wed, 2 Jan 2019 15:03:13 +0000 (08:03 -0700)]
Remove a cleanup from target-descriptions.c
This removes a cleanup from target-descriptions.c, by changing it to
use a unique_ptr instead. Note that a deletion adapter is used, even
though target_desc is allocated with new, to avoid moving target_desc
to target-descriptions.h.
gdb/ChangeLog
2019-01-02 Tom Tromey <tom@tromey.com>
* xml-tdesc.c (xml_cache): Hold a target_desc_up.
(tdesc_parse_xml): Remove cleanups.
* target-descriptions.h (make_cleanup_free_target_description):
Don't declare.
(target_desc_deleter): New struct.
(target_desc_up): New typedef.
* target-descriptions.c (target_desc_deleter::operator()): Rename
from free_target_description.
(make_cleanup_free_target_description): Remove.
Tom Tromey [Wed, 2 Jan 2019 16:17:43 +0000 (09:17 -0700)]
Remove cleanups from linespec.c
This removes the remaining cleanups from linespec.c. This adds a
constructor and destructor to linespec_parser, but in a minimal way --
the parser could still benefit from a bit more C++-ification.
gdb/ChangeLog
2019-01-02 Tom Tromey <tom@tromey.com>
Tom Tromey [Wed, 2 Jan 2019 16:58:14 +0000 (09:58 -0700)]
Change inferior_to_inferior_object to return a gdbpy_ref
Most callers of inferior_to_inferior_object already use a gdbpy_ref,
so this changes inferior_to_inferior_object to return one. Doing this
revealed that create_thread_object was not correctly handling the case
where inferior_to_inferior_object failed, so this patch fixes this as
well.
gdb/ChangeLog
2019-01-02 Tom Tromey <tom@tromey.com>
Simon Marchi [Wed, 2 Jan 2019 22:31:08 +0000 (17:31 -0500)]
Place displaced step data directly in inferior structure
This patch moves the per-inferior data related to displaced stepping to
be directly in the inferior structure, rather than in a container on the
side.
On notable difference is that previously, we deleted the state on
inferior exit, which guaranteed a clean state if re-using the inferior
for a new run or attach. We now need to reset the state manually.
At the same time, I changed step_saved_copy to be a gdb::byte_vector, so
it is automatically freed on destruction (which should plug the leak
reported here [1]).
Fix leak of struct call_thread_fsm in call_function_by_hand_dummy.
When the call does not complete, the call_thread_fsm allocated
by new_call_thread_fsm is not cleaned up and deleted, which causes
the following leak e.g. in gdb.base/callfuncs.exp:
==29263== 560 bytes in 7 blocks are definitely lost in loss record 2,833 of 3,341
==29263== at 0x4C2E0BC: calloc (vg_replace_malloc.c:762)
==29263== by 0x405110: xcalloc (common-utils.c:84)
==29263== by 0x4E67EB: xcnew<call_thread_fsm> (poison.h:122)
==29263== by 0x4E67EB: new_call_thread_fsm (infcall.c:516)
==29263== by 0x4E67EB: call_function_by_hand_dummy(value*, type*, gdb::array_view<value*>, void (*)(void*, int), void*) (infcall.c:1154)
==29263== by 0x4E784E: call_function_by_hand(value*, type*, gdb::array_view<value*>) (infcall.c:693)
==29263== by 0x496111: eval_call(expression*, noside, int, value**, char const*, type*) [clone .isra.5] (eval.c:835)
Fix the leak by similarly doing cleanup/destroy when restoring
previous state machine.
Tested on debian/amd64, natively and under valgrind.
2019-01-02 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* infcall.c (call_function_by_hand_dummy): cleanup/destroy sm
in case of call that did not complete.
Andrey Utkin [Fri, 9 Nov 2018 19:09:40 +0000 (19:09 +0000)]
Fix search of debug files for remote debuggee
When using remote debugging server, and when debuggee filename is
inferred via qXfer:exec-file:read request, or sysroot starts with
"target:", this "target:" prefix of filepaths is not treated correctly
during debug file search - it appears in the middle of the looked up
paths.
In the following example, unpatched GDB can't find separate debug files for
neither the executable, nor standard libraries:
$ gdb -ex 'set debug separate-debug-file 1' -ex 'set sysroot target:/' -ex 'set debug-file-directory /usr/lib/debug:/home/j/hide' -ex 'target remote :3333' -ex 'break main' -ex 'continue' -ex 'bt' -ex 'info sharedlibrary' -ex 'set confirm off' -ex 'quit'
GNU gdb (Gentoo 9999 vanilla) 8.2.50.20181109-git
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-pc-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://bugs.gentoo.org/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word".
Remote debugging using :3333
Reading /home/j/test from remote target...
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
Reading /home/j/test from remote target...
Reading symbols from target:/home/j/test...
Looking for separate debug info (debug link) for target:/home/j/test
Trying target:/home/j/test.debug
Reading /home/j/test.debug from remote target...
Trying target:/home/j/.debug/test.debug
Reading /home/j/.debug/test.debug from remote target...
Trying /usr/lib/debug/target:/home/j/test.debug
Trying /home/j/hide/target:/home/j/test.debug
(No debugging symbols found in target:/home/j/test)
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
Reading symbols from target:/lib64/ld-linux-x86-64.so.2...
Looking for separate debug info (debug link) for target:/lib64/ld-linux-x86-64.so.2
Trying target:/lib64/ld-2.27.so.debug
Reading /lib64/ld-2.27.so.debug from remote target...
Trying target:/lib64/.debug/ld-2.27.so.debug
Reading /lib64/.debug/ld-2.27.so.debug from remote target...
Trying /usr/lib/debug/target:/lib64/ld-2.27.so.debug
Trying /home/j/hide/target:/lib64/ld-2.27.so.debug
(No debugging symbols found in target:/lib64/ld-linux-x86-64.so.2)
Looking for separate debug info (build-id) for system-supplied DSO at 0x7ffff7ffa000
Trying /usr/lib/debug/.build-id/fd/03d584bc1a90ba28be457635a02662c9f9c1f2.debug
Trying /home/j/hide/.build-id/fd/03d584bc1a90ba28be457635a02662c9f9c1f2.debug
0x00007ffff7dd7000 in ?? () from target:/lib64/ld-linux-x86-64.so.2
Breakpoint 1 at 0x4005eb
Continuing.
Reading /lib64/libpthread.so.0 from remote target...
Reading /lib64/libc.so.6 from remote target...
Looking for separate debug info (debug link) for target:/lib64/libpthread.so.0
Trying target:/lib64/libpthread-2.27.so.debug
Reading /lib64/libpthread-2.27.so.debug from remote target...
Trying target:/lib64/.debug/libpthread-2.27.so.debug
Reading /lib64/.debug/libpthread-2.27.so.debug from remote target...
Trying /usr/lib/debug/target:/lib64/libpthread-2.27.so.debug
Trying /home/j/hide/target:/lib64/libpthread-2.27.so.debug
Looking for separate debug info (debug link) for target:/lib64/libc.so.6
Trying target:/lib64/libc-2.27.so.debug
Reading /lib64/libc-2.27.so.debug from remote target...
Trying target:/lib64/.debug/libc-2.27.so.debug
Reading /lib64/.debug/libc-2.27.so.debug from remote target...
Trying /usr/lib/debug/target:/lib64/libc-2.27.so.debug
Trying /home/j/hide/target:/lib64/libc-2.27.so.debug
Breakpoint 1, 0x00000000004005eb in main ()
#0 0x00000000004005eb in main ()
From To Syms Read Shared Object Library
0x00007ffff7dd6e80 0x00007ffff7df4650 Yes (*) target:/lib64/ld-linux-x86-64.so.2
0x00007ffff7bbbb70 0x00007ffff7bcbfee Yes (*) target:/lib64/libpthread.so.0
0x00007ffff780f200 0x00007ffff7962d7c Yes (*) target:/lib64/libc.so.6
(*): Shared library is missing debugging information.
With current fix, the paths used always have target: in the beginning
and this helps to find all debug files:
$ gdb -ex 'set debug separate-debug-file 1' -ex 'set sysroot target:/' -ex 'set debug-file-directory /usr/lib/debug:/home/j/hide' -ex 'target remote :3333' -ex 'break main' -ex 'continue' -ex 'bt' -ex 'info sharedlibrary' -ex 'set confirm off' -ex 'quit'
GNU gdb (Gentoo 9999 vanilla) 8.2.50.20181109-git
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-pc-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://bugs.gentoo.org/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word".
Remote debugging using :3333
Reading /home/j/test from remote target...
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.
Reading /home/j/test from remote target...
Reading symbols from target:/home/j/test...
Looking for separate debug info (debug link) for target:/home/j/test
Trying target:/home/j/test.debug
Reading /home/j/test.debug from remote target...
Trying target:/home/j/.debug/test.debug
Reading /home/j/.debug/test.debug from remote target...
Trying target:/usr/lib/debug//home/j/test.debug
Reading /usr/lib/debug//home/j/test.debug from remote target...
Trying target:/home/j/hide//home/j/test.debug
Reading /home/j/hide//home/j/test.debug from remote target...
Reading /home/j/hide//home/j/test.debug from remote target...
Reading symbols from target:/home/j/hide//home/j/test.debug...
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
Reading /lib64/ld-linux-x86-64.so.2 from remote target...
Reading symbols from target:/lib64/ld-linux-x86-64.so.2...
Looking for separate debug info (debug link) for target:/lib64/ld-linux-x86-64.so.2
Trying target:/lib64/ld-2.27.so.debug
Reading /lib64/ld-2.27.so.debug from remote target...
Trying target:/lib64/.debug/ld-2.27.so.debug
Reading /lib64/.debug/ld-2.27.so.debug from remote target...
Trying target:/usr/lib/debug//lib64/ld-2.27.so.debug
Reading /usr/lib/debug//lib64/ld-2.27.so.debug from remote target...
Reading /usr/lib/debug//lib64/ld-2.27.so.debug from remote target...
Reading symbols from target:/usr/lib/debug//lib64/ld-2.27.so.debug...
Looking for separate debug info (build-id) for system-supplied DSO at 0x7ffff7ffa000
Trying /usr/lib/debug/.build-id/fd/03d584bc1a90ba28be457635a02662c9f9c1f2.debug
Trying /home/j/hide/.build-id/fd/03d584bc1a90ba28be457635a02662c9f9c1f2.debug
0x00007ffff7dd7000 in _start () from target:/lib64/ld-linux-x86-64.so.2
Breakpoint 1 at 0x4005ef: file test/test16.c, line 13.
Continuing.
Reading /lib64/libpthread.so.0 from remote target...
Reading /lib64/libc.so.6 from remote target...
Looking for separate debug info (debug link) for target:/lib64/libpthread.so.0
Trying target:/lib64/libpthread-2.27.so.debug
Reading /lib64/libpthread-2.27.so.debug from remote target...
Trying target:/lib64/.debug/libpthread-2.27.so.debug
Reading /lib64/.debug/libpthread-2.27.so.debug from remote target...
Trying target:/usr/lib/debug//lib64/libpthread-2.27.so.debug
Reading /usr/lib/debug//lib64/libpthread-2.27.so.debug from remote target...
Reading /usr/lib/debug//lib64/libpthread-2.27.so.debug from remote target...
Looking for separate debug info (debug link) for target:/lib64/libc.so.6
Trying target:/lib64/libc-2.27.so.debug
Reading /lib64/libc-2.27.so.debug from remote target...
Trying target:/lib64/.debug/libc-2.27.so.debug
Reading /lib64/.debug/libc-2.27.so.debug from remote target...
Trying target:/usr/lib/debug//lib64/libc-2.27.so.debug
Reading /usr/lib/debug//lib64/libc-2.27.so.debug from remote target...
Reading /usr/lib/debug//lib64/libc-2.27.so.debug from remote target...
Breakpoint 1, main () at test/test16.c:13
13 for ( i=0; i<10; ++i)
#0 main () at test/test16.c:13
From To Syms Read Shared Object Library
0x00007ffff7dd6e80 0x00007ffff7df4650 Yes target:/lib64/ld-linux-x86-64.so.2
0x00007ffff7bbbb70 0x00007ffff7bcbfee Yes target:/lib64/libpthread.so.0
0x00007ffff780f200 0x00007ffff7962d7c Yes target:/lib64/libc.so.6
gdb/ChangeLog:
2018-11-09 Andrey Utkin <autkin@undo.io>
* symfile.c (find_separate_debug_file): Fix search of debug files for
remote debuggee.
Tom Tromey [Wed, 2 Jan 2019 16:30:49 +0000 (09:30 -0700)]
Style improvements in gdb/python
This fixes a few minor style issues I found in gdb/python: some
unnecessary casts, the removal of an unnecessary local variable, and
one instance of incorrect formatting.
Tested by rebuilding and re-running gdb.python.
gdb/ChangeLog
2019-01-02 Tom Tromey <tom@tromey.com>
Andrew Burgess [Thu, 13 Dec 2018 17:59:12 +0000 (17:59 +0000)]
gdb/riscv: Split ISA and ABI features
The goal of this commit is to allow RV64 binaries compiled for the 'F'
extension to run on a target that supports both the 'F' and 'D'
extensions.
The 'D' extension depends on the 'F' extension and chapter 9 of the
RISC-V ISA manual implies that running a program compiled for 'F' on
a 'D' target should be fine.
To support this the gdbarch now holds two feature sets, one represents
the features that are present on the target, and one represents the
features requested in the ELF flags.
The existing error checks are relaxed slightly to allow binaries
compiled for 32-bit 'F' extension to run on targets with the 64-bit
'D' extension.
A new set of functions called riscv_abi_{xlen,flen} are added to
compliment the existing riscv_isa_{xlen,flen}, and some callers to the
isa functions now call the abi functions when that is appropriate.
In riscv_call_arg_struct two asserts are removed, these asserts no
longer make sense. The asserts were both like this:
And were made in two cases, when passing structures like these:
struct {
integer field1;
float field2;
};
or,
struct {
float field1;
integer field2;
};
When running on an RV64 target which only has 32-bit float then the
integer field could be 64-bits, while if the float field is 32-bits
the overall size of the structure can be 128-bits (with 32-bits of
padding). In this case the assertion would fail, however, the code
isn't incorrect, so its safe to just remove the assertion.
This was tested by running on an RV64IMFDC target using a compiler
configured for RV64IMFC, and comparing the results with those obtained
when using a compiler configured for RV64IMFDC. The only regressions
I see (now) are in gdb.base/store.exp and are related too different
code generation choices GCC makes between the two targets.
Finally, this commit does not make any attempt to support running
binaries compiled for RV32 on an RV64 target, though nothing in here
should prevent that being supported in the future.
gdb/ChangeLog:
* arch/riscv.h (struct riscv_gdbarch_features) <hw_float_abi>:
Delete.
<operator==>: Update with for removed field.
<hash>: Likewise.
* riscv-tdep.h (struct gdbarch_tdep) <features>: Renamed to...
<isa_features>: ...this.
<abi_features>: New field.
(riscv_isa_flen): Update comment.
(riscv_abi_xlen): New declaration.
(riscv_abi_flen): New declaration.
* riscv-tdep.c (riscv_isa_xlen): Update to get answer from
isa_features.
(riscv_abi_xlen): New function.
(riscv_isa_flen): Update to get answer from isa_features.
(riscv_abi_flen): New function.
(riscv_has_fp_abi): Update to get answer from abi_features.
(riscv_call_info::riscv_call_info): Use abi xlen and flen, not isa
xlen and flen.
(riscv_call_info) <xlen, flen>: Update comment.
(riscv_call_arg_struct): Remove invalid assertions
(riscv_features_from_gdbarch_info): Update now hw_float_abi field
is removed.
(riscv_gdbarch_init): Gather isa features and abi features
separately, ensure both match on the gdbarch when reusing an old
gdbarch. Relax an error check to allow 32-bit abi float to run on
a target with 64-bit float hardware.
The last text produced was not freed, causing the below leak
(e.g. in gdb.base/catch-syscall.exp):
==24970== 56 bytes in 12 blocks are definitely lost in loss record 626 of 3,289
==24970== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309)
==24970== by 0x66B9C3F: __vasprintf_chk (vasprintf_chk.c:80)
==24970== by 0x405181: vasprintf (stdio2.h:210)
==24970== by 0x405181: xstrvprintf(char const*, __va_list_tag*) (common-utils.c:122)
==24970== by 0x40524B: xstrprintf(char const*, ...) (common-utils.c:113)
==24970== by 0x3B49DB: print_one_catch_syscall(breakpoint*, bp_location**) (break-catch-syscall.c:275)
==24970== by 0x3C698F: print_one_breakpoint_location(breakpoint*, bp_location*, int, bp_location**, int) (breakpoint.c:6076)
==24970== by 0x3C75B1: print_one_breakpoint(breakpoint*, bp_location**, int) (breakpoint.c:6373)
==24970== by 0x3C7D0E: breakpoint_1(char const*, int, int (*)(breakpoint const*)) (breakpoint.c:6571)
==24970== by 0x3C822C: info_breakpoints_command(char const*, int) (breakpoint.c:6625)
2019-01-01 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* break-catch-syscall.c (print_one_catch_syscall): xfree
the last text.
Joel Brobecker [Tue, 1 Jan 2019 06:01:51 +0000 (10:01 +0400)]
Update copyright year range in all GDB files.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.