Benjamin Gray [Wed, 9 Nov 2022 04:51:07 +0000 (15:51 +1100)]
powerpc/mm: Remove empty hash__ functions
The empty hash__* functions are unnecessary. The empty definitions were
introduced when 64-bit Hash support was added, as the functions were
still used in generic code. These empty definitions were prefixed with
hash__ when Radix support was added, and new wrappers with the original
names were added that selected the Radix or Hash version based on
radix_enabled().
But the hash__ prefixed functions were not part of a public interface,
so there is no need to include them for compatibility with anything.
Generic code will use the non-prefixed wrappers, and Hash specific code
will know that there is no point in calling them (or even worse, call
them and expect them to do something).
Benjamin Gray [Wed, 9 Nov 2022 04:51:05 +0000 (15:51 +1100)]
powerpc/code-patching: Use WARN_ON and fix check in poking_init
BUG_ON() when failing to initialise the code patching window is
unnecessary, and use of BUG_ON is discouraged. We don't set
poking_init_done in this case, so failure to init the boot CPU will
result in a strict RWX error when a following patch_instruction uses
raw_patch_instruction. If it only fails for later CPUs, they won't be
onlined in the first place.
The return value of cpuhp_setup_state() is also >= 0 on success,
so check for < 0.
Jordan Niethe [Wed, 9 Nov 2022 04:51:04 +0000 (15:51 +1100)]
powerpc: Allow clearing and restoring registers independent of saved breakpoint state
For the coming temporary mm used for instruction patching, the
breakpoint registers need to be cleared to prevent them from
accidentally being triggered. As soon as the patching is done, the
breakpoints will be restored.
The breakpoint state is stored in the per-cpu variable current_brk[].
Add a suspend_breakpoints() function which will clear the breakpoint
registers without touching the state in current_brk[]. Add a pair
function restore_breakpoints() which will move the state in
current_brk[] back to the registers.
Pali Rohár [Sat, 20 Aug 2022 12:33:27 +0000 (14:33 +0200)]
powerpc/fsl-pci: Choose PCI host bridge with alias pci0 as the primary
If there's no PCI host bridge with ISA then check for PCI host bridge with
alias "pci0" (first PCI host bridge) and if it exists then choose it as the
primary PCI host bridge.
This makes choice of primary PCI host bridge more stable across boots and
updates as the last fallback candidate for primary PCI host bridge (if
there is no choice) is selected arbitrary.
powerpc: dts: turris1x.dts: Add channel labels for temperature sensor
Channel 0 of SA56004ED chip refers to internal SA56004ED chip sensor (chip
itself is located on the board) and channel 1 of SA56004ED chip refers to
external sensor which is connected to temperature diode of the P2020 CPU.
Fixes: 54c15ec3b738 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220930123901.10251-1-pali@kernel.org
Commit 7ad4bd887d27 ("powerpc/book3e: get rid of #include <generated/compile.h>")
removed the usage of the define UTS_RELEASE but forgot to drop the
include.
utsrelease.h is potentially generated on each build. By removing the
unused include we can get rid of some spurious recompilations.
Fixes: 7ad4bd887d27 ("powerpc/book3e: get rid of #include <generated/compile.h>") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix typo in change log and add more explanation] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221126051002.123199-2-linux@weissschuh.net
Naveen N. Rao [Tue, 22 Nov 2022 06:40:53 +0000 (12:10 +0530)]
selftests/powerpc: Bump up rlimit for perf-hwbreak test
The systemwide perf hardware breakpoint test tries to open a perf event
on each cpu. On large systems, we run out of file descriptors and fail
the test. Instead, have the test set the file descriptor limit to an
arbitraty high value.
Naveen N. Rao [Tue, 22 Nov 2022 06:40:52 +0000 (12:10 +0530)]
selftests/powerpc: Move perror closer to its use
Right now, if perf_event_open() fails for the systemwide tests, error
report is printed too late, sometimes after subsequent system calls.
Move use of perror() to the main function, just after the syscall.
Nicholas Piggin [Sun, 27 Nov 2022 12:49:26 +0000 (22:49 +1000)]
KVM: PPC: Book3E: Fix CONFIG_TRACE_IRQFLAGS support
32-bit does not trace_irqs_off() to match the trace_irqs_on() call in
kvmppc_fix_ee_before_entry(). This can lead to irqs being enabled twice
in the trace, and the irqs-off region between guest exit and the host
enabling local irqs again is not properly traced.
64-bit code does call this, but from asm code where volatiles are live
and so incorrectly get clobbered.
Move the irq reconcile into C to fix both problems.
Tiezhu Yang [Fri, 18 Nov 2022 09:40:29 +0000 (17:40 +0800)]
powerpc: Use "grep -E" instead of "egrep"
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl arch/powerpc`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Chen Lifu [Thu, 3 Nov 2022 07:01:22 +0000 (15:01 +0800)]
powerpc/powermac: Fix symbol not declared warnings
1. ppc_override_l2cr and ppc_override_l2cr_value are only used in
l2cr_init() function, remove them and used *l2cr directly.
2. has_l2cache is not used outside of the file, so mark it static and
do not initialise statics to 0.
Fixes the following warnings:
arch/powerpc/platforms/powermac/setup.c:73:5: warning: symbol
'ppc_override_l2cr' was not declared. Should it be static?
arch/powerpc/platforms/powermac/setup.c:74:5: warning: symbol
'ppc_override_l2cr_value' was not declared. Should it be static?
arch/powerpc/platforms/powermac/setup.c:75:5: warning: symbol
'has_l2cache' was not declared. Should it be static?
Bo Liu [Mon, 31 Oct 2022 06:37:06 +0000 (02:37 -0400)]
powerpc/pseries/eeh: Fix some kernel-doc warnings
Fixes the following W=1 kernel build warning(s):
arch/powerpc/platforms/pseries/eeh_pseries.c:163: warning: Function parameter or member 'config_addr' not described in 'pseries_eeh_phb_reset'
arch/powerpc/platforms/pseries/eeh_pseries.c:163: warning: Excess function parameter 'config_adddr' description in 'pseries_eeh_phb_reset'
arch/powerpc/platforms/pseries/eeh_pseries.c:198: warning: Function parameter or member 'config_addr' not described in 'pseries_eeh_phb_configure_bridge'
arch/powerpc/platforms/pseries/eeh_pseries.c:198: warning: Excess function parameter 'config_adddr' description in 'pseries_eeh_phb_configure_bridge'
Russell Currey [Mon, 24 Oct 2022 04:13:46 +0000 (15:13 +1100)]
powerpc/8xx: Fix warning in hw_breakpoint_handler()
In hw_breakpoint_handler(), ea is set by wp_get_instr_detail() except
for 8xx, leading the variable to be passed uninitialised to
wp_check_constraints(). This is safe as wp_check_constraints() returns
early without using ea, so just set it to make the compiler happy.
Naveen N. Rao [Thu, 20 Oct 2022 17:28:59 +0000 (22:58 +0530)]
powerpc/kprobes: Use preempt_enable() rather than the no_resched variant
preempt_enable_no_resched() is just the same as preempt_enable() when we
are in a irqs disabled context. kprobe_handler() and the post/fault
handlers are all called with irqs disabled. As such, convert those to
just use preempt_enable().
Naveen N. Rao [Thu, 20 Oct 2022 17:28:58 +0000 (22:58 +0530)]
powerpc/kprobes: Have optimized_callback() use preempt_enable()
Similar to x86 commit 2e62024c265aa6 ("kprobes/x86: Use preempt_enable()
in optimized_callback()"), change powerpc optprobes to use
preempt_enable() rather than preempt_enable_no_resched() since powerpc
also removed irq disabling for optprobes in commit f72180cc93a2c6
("powerpc/kprobes: Do not disable interrupts for optprobes and
kprobes_on_ftrace").
Naveen N. Rao [Thu, 20 Oct 2022 17:28:57 +0000 (22:58 +0530)]
powerpc/kprobes: Remove preempt disable around call to get_kprobe() in arch_prepare_kprobe()
arch_prepare_kprobe() is called from register_kprobe() via
prepare_kprobe(), or through register_aggr_kprobe(), both with the
kprobe_mutex held. Per the comment for get_kprobe():
/*
* This routine is called either:
* - under the 'kprobe_mutex' - during kprobe_[un]register().
* OR
* - with preemption disabled - from architecture specific code.
*/
As such, there is no need to disable preemption around the call to
get_kprobe(). Drop the same.
ruanjinjie [Wed, 19 Oct 2022 06:34:14 +0000 (14:34 +0800)]
powerpc/mpic_msgr: fix cast removes address space of expression warnings
When build Linux kernel, encounter the following warnings:
./arch/powerpc/sysdev/mpic_msgr.c:230:38: warning: cast removes address space '__iomem' of expression
./arch/powerpc/sysdev/mpic_msgr.c:230:27: warning: incorrect type in assignment (different address spaces)
The data type of msgr->mer and msgr->base are 'u32 __iomem *', but
converted to 'u32 *' and 'u8 *' directly and cause above warnings, now
instead of using a type cast, change the size of the pointer offset to fix
these warnings.
Yang Yingliang [Mon, 17 Oct 2022 03:23:33 +0000 (11:23 +0800)]
powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()
If remapping 'data->trig_page' fails, the 'data->eoi_mmio' need be unmapped
before returning from xive_spapr_populate_irq_data().
Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221017032333.1852406-1-yangyingliang@huawei.com
Stephen Rothwell [Mon, 10 Oct 2022 05:57:21 +0000 (16:57 +1100)]
powerpc: suppress some linker warnings in recent linker versions
This is a follow on from commit
0d362be5b142 ("Makefile: link with -z noexecstack --no-warn-rwx-segments")
for arch/powerpc/boot to address wanrings like:
ld: warning: opal-calls.o: missing .note.GNU-stack section implies executable stack
ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld: warning: arch/powerpc/boot/zImage.epapr has a LOAD segment with RWX permissions
This fixes issue https://github.com/linuxppc/issues/issues/417
Nicholas Piggin [Thu, 6 Oct 2022 10:56:53 +0000 (20:56 +1000)]
powerpc: remove the last remnants of cputime_t
cputime_t was a core kernel type, removed by commits ed5c8c854f2b..b672592f0221. As explained in commit b672592f0221
("sched/cputime: Remove generic asm headers"), the final cleanup
is for the arch to provide cputime_to_nsec[s](). Commit ade7667a981b
("powerpc: Add cputime_to_nsecs()") did that, but justdidn't remove
the then-unused cputime_to_usecs(), cputime_t type, and associated
remnants.
That output can then be piped directly into scripts/decodecode and
interpreted correctly.
Printing the dump on a single line does produce a very long line, about
173 characters. That is still shorter than x86, which prints nearly 200
characters even without timestamps etc.
All consoles I'm aware of will wrap the line if it's too long, so the
length should not be a functional problem. If anything it should help on
consoles like VGA by using less vertical space.
powerpc: Make instruction dump work with scripts/decodecode
Matt reported that scripts/decodecode doesn't work for the instruction
dump in the powerpc oops output. Although there are scripts around that
can decode it, it would be preferable if the standard in-tree script
worked.
All other arches prefix the instruction dump with "Code:", and that's
what the script looks for, so use that.
With 16k pages, only the first entry is used by the kernel, so no need
to adapt the address of other entries. Only duplicate the first entry
for hardware.
powerpc/sgy_cts1000: convert to using gpiod API and facelift
This patch converts the driver to newer gpiod API, and away from
OF-specific legacy gpio API that we want to stop using.
While at it, let's address a few more issues:
- switch to using dev_info()/pr_info() and friends
- cancel work when unbinding the driver
Note that the original code handled halt GPIO polarity incorrectly:
in halt callback, when line polarity is "low" it would set trigger to
"1" and drive halt line high, which is counter to the annotation.
gpiod API will drive such line low. However I do not see any DTSes
in mainline that have a DT node with "sgy,gpio-halt" compatible.
This switches PIKA Warp away from legacy gpio API and to newer gpiod
API, so that we can eventually deprecate the former.
Because LEDs are normally driven by leds-gpio driver, but the
platform code also wants to access the LEDs during thermal shutdown,
and gpiod API does not allow locating GPIO without requesting it,
the platform code is now responsible for locating GPIOs through device
tree and requesting them. It then constructs platform data for
leds-gpio platform device and registers it. This allows platform
code to retain access to LED GPIO descriptors and use them when needed.
powerpc/xmon: Fix -Wswitch-unreachable warning in bpt_cmds
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable into the case that uses it, which silences the warning:
arch/powerpc/xmon/xmon.c: In function ‘bpt_cmds’:
arch/powerpc/xmon/xmon.c:1529:13: warning: statement will never be executed [-Wswitch-unreachable]
1529 | int mode;
| ^~~~
Fixes: 09b6c1129f89 ("powerpc/xmon: Fix compile error with PPC_8xx=y") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/YySE6FHiOcbWWR+9@work
powerpc/kvm: Remove unused references for MMCR3/SIER2/SIER3 registers
Commit 57dc0eed73ca ("KVM: PPC: Book3S HV P9: Implement PMU save/restore
in C") removed the PMU save/restore functions from assembly code and
implemented these functions in C, for power9 and later platforms.
After the code refactoring, Performance Monitoring Unit (PMU) registers
became part of "p9_host_os_sprs" structure and now this structure is
used to save/restore pmu host registers, for power9 and later platfroms.
But we still have old unused registers references. Patch removes unused
host_mmcr references for Monitor Mode Control Register 3 (MMCR3)/
Sampled Instruction Event Register 2 (SIER2)/ SIER3 registers from
"struct kvmppc_host_state".
Fixes: 57dc0eed73ca ("KVM: PPC: Book3S HV P9: Implement PMU save/restore in C") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220916105736.268153-3-disgoel@linux.vnet.ibm.com
The kvm code was refactored to convert some of kvm assembly routines to C.
This includes commits which moved code path for the kvm guest entry/exit
for p7/8 from aseembly to C. As part of the code changes, usage of some of
the macros were removed. But definitions still exist in the assembly files.
Commits are listed below:
Commit 2e1ae9cd56f8 ("KVM: PPC: Book3S HV: Implement radix prefetch workaround by disabling MMU")
Commit 9769a7fd79b6 ("KVM: PPC: Book3S HV: Remove radix guest support from P7/8 path")
Commit fae5c9f3664b ("KVM: PPC: Book3S HV: remove ISA v3.0 and v3.1 support from P7/8 path")
Commit 57dc0eed73ca ("KVM: PPC: Book3S HV P9: Implement PMU save/restore in C")
Many of the asm-offset macro definitions were missed to remove. Patch
fixes by removing the unused macros.
Nicholas Piggin [Fri, 9 Sep 2022 05:23:12 +0000 (15:23 +1000)]
powerpc: add compile-time support for lbarx, lharx
ISA v2.06 (POWER7 and up) as well as e6500 support lbarx and lharx.
Add a compile option that allows code to use it, and add support in
cmpxchg and xchg 8 and 16 bit values without shifting and masking.
Naveen N. Rao [Tue, 9 Aug 2022 10:54:25 +0000 (16:24 +0530)]
powerpc/ftrace: Ignore weak functions
Extend commit b39181f7c6907d ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to
avoid adding weak function") to ppc32 and ppc64 -mprofile-kernel by
defining FTRACE_MCOUNT_MAX_OFFSET.
For ppc64 -mprofile-kernel ABI, we can have two instructions at function
entry for TOC setup followed by 'mflr r0' and 'bl _mcount'. So, the
mcount location is at most the 4th instruction in a function. For ppc32,
mcount location is always the 3rd instruction in a function, preceded by
'mflr r0' and 'stw r0,4(r1)'.
With this patch, and with ppc64le_guest_defconfig and some ftrace/bpf
config items enabled:
# grep __ftrace_invalid_address available_filter_functions | wc -l
79
Yang Yingliang [Mon, 21 Nov 2022 15:43:39 +0000 (23:43 +0800)]
ocxl: fix pci device refcount leak when calling get_function_0()
get_function_0() calls pci_get_domain_bus_and_slot(), as comment
says, it returns a pci device with refcount increment, so after
using it, pci_dev_put() needs be called.
Get the device reference when get_function_0() is not called, so
pci_dev_put() can be called in the error path and callers
unconditionally. And add comment above get_dvsec_vendor0() to tell
callers to call pci_dev_put().
Fixes: 87db7579ebd5 ("ocxl: control via sysfs whether the FPGA is reloaded on a link reset") Suggested-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221121154339.4088935-1-yangyingliang@huawei.com
Yang Yingliang [Fri, 11 Nov 2022 14:59:29 +0000 (22:59 +0800)]
ocxl: fix possible name leak in ocxl_file_register_afu()
If device_register() returns error in ocxl_file_register_afu(),
the name allocated by dev_set_name() need be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup(),
and info is freed in info_release().
Fixes: 75ca758adbaf ("ocxl: Create a clear delineation between ocxl backend & frontend") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221111145929.2429271-1-yangyingliang@huawei.com
Yang Yingliang [Fri, 11 Nov 2022 14:54:40 +0000 (22:54 +0800)]
cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
If device_register() fails in cxl_pci_afu|adapter(), the device
is not added, device_unregister() can not be called in the error
path, otherwise it will cause a null-ptr-deref because of removing
not added device.
As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails.
Fixes: f204e0b8cedd ("cxl: Driver code for powernv PCIe based cards for userspace access") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221111145440.2426970-2-yangyingliang@huawei.com
Yang Yingliang [Fri, 11 Nov 2022 14:54:39 +0000 (22:54 +0800)]
cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()
If device_register() fails in cxl_register_afu|adapter(), the device
is not added, device_unregister() can not be called in the error path,
otherwise it will cause a null-ptr-deref because of removing not added
device.
As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails.
Fixes: 14baf4d9c739 ("cxl: Add guest-specific code") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221111145440.2426970-1-yangyingliang@huawei.com
Miaoqian Lin [Sun, 5 Jun 2022 06:00:38 +0000 (10:00 +0400)]
cxl: Fix refcount leak in cxl_calc_capp_routing
of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
This function only calls of_node_put() in normal path,
missing it in the error path.
Add missing of_node_put() to avoid refcount leak.
Fixes: f24be42aab37 ("cxl: Add psl9 specific code") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220605060038.62217-1-linmq006@gmail.com
Randy Dunlap [Thu, 24 Nov 2022 06:19:18 +0000 (22:19 -0800)]
powerpc/mpc52xx_lpbfifo: fix all kernel-doc warnings
Fix multiple kernel-doc warnings in mpc52xx_lpbfifo.c:
arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c:377: warning: expecting prototype for mpc52xx_lpbfifo_bcom_poll(). Prototype was for mpc52xx_lpbfifo_poll() instead
mpc52xx_lpbfifo.c:221: warning: No description found for return value of 'mpc52xx_lpbfifo_irq'
mpc52xx_lpbfifo.c:327: warning: No description found for return value of 'mpc52xx_lpbfifo_bcom_irq'
mpc52xx_lpbfifo.c:398: warning: No description found for return value of 'mpc52xx_lpbfifo_submit'
mpc52xx_lpbfifo.c:64: warning: Function parameter or member 'req' not described in 'mpc52xx_lpbfifo_kick'
mpc52xx_lpbfifo.c:220: warning: contents before sections
mpc52xx_lpbfifo.c:223: warning: Function parameter or member 'irq' not described in 'mpc52xx_lpbfifo_irq'
mpc52xx_lpbfifo.c:223: warning: Function parameter or member 'dev_id' not described in 'mpc52xx_lpbfifo_irq'
mpc52xx_lpbfifo.c:328: warning: contents before sections
mpc52xx_lpbfifo.c:331: warning: Function parameter or member 'irq' not described in 'mpc52xx_lpbfifo_bcom_irq'
mpc52xx_lpbfifo.c:331: warning: Function parameter or member 'dev_id' not described in 'mpc52xx_lpbfifo_bcom_irq'
Yang Yingliang [Fri, 4 Nov 2022 03:25:51 +0000 (11:25 +0800)]
macintosh: fix possible memory leak in macio_add_one_device()
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically. It
needs to be freed when of_device_register() fails. Call put_device() to
give up the reference that's taken in device_initialize(), so that it
can be freed in kobject_cleanup() when the refcount hits 0.
macio device is freed in macio_release_dev(), so the kfree() can be
removed.
Stephen Kitt [Thu, 16 Jun 2022 17:04:24 +0000 (19:04 +0200)]
macintosh/via-pmu-backlight: Use backlight helper
backlight_properties.fb_blank is deprecated. The states it represents
are handled by other properties; but instead of accessing those
properties directly, drivers should use the helpers provided by
backlight.h.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Finn Thain [Mon, 21 Mar 2022 09:28:00 +0000 (20:28 +1100)]
macintosh/via-pmu: Avoid compiler warnings when CONFIG_PROC_FS is disabled
drivers/macintosh/via-pmu.c:897:12: warning: 'pmu_battery_proc_show' defined but not used [-Wunused-function]
static int pmu_battery_proc_show(struct seq_file *m, void *v)
^~~~~~~~~~~~~~~~~~~~~
drivers/macintosh/via-pmu.c:871:12: warning: 'pmu_irqstats_proc_show' defined but not used [-Wunused-function]
static int pmu_irqstats_proc_show(struct seq_file *m, void *v)
^~~~~~~~~~~~~~~~~~~~~~
drivers/macintosh/via-pmu.c:860:12: warning: 'pmu_info_proc_show' defined but not used [-Wunused-function]
static int pmu_info_proc_show(struct seq_file *m, void *v)
^~~~~~~~~~~~~~~~~~
Add some #ifdefs to avoid unused code warnings when CONFIG_PROC_FS is
disabled.
Reported-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0c11c0770fc4ec7e80a4b2e0ffce1055b792cfdb.1647854880.git.fthain@linux-m68k.org
This is a tentative to write above the stack. The problem is encoutered
with tests added by commit 38608ee7b690 ("bpf, tests: Add load store
test case for tail call")
This happens because tail call is done to a BPF prog with a different
stack_depth. At the time being, the stack is kept as is when the caller
tail calls its callee. But at exit, the callee restores the stack based
on its own properties. Therefore here, at each run, r1 is erroneously
increased by 32 - 16 = 16 bytes.
This was done that way in order to pass the tail call count from caller
to callee through the stack. As powerpc32 doesn't have a red zone in
the stack, it was necessary the maintain the stack as is for the tail
call. But it was not anticipated that the BPF frame size could be
different.
Let's take a new approach. Use register r4 to carry the tail call count
during the tail call, and save it into the stack at function entry if
required. This means the input parameter must be in r3, which is more
correct as it is a 32 bits parameter, then tail call better match with
normal BPF function entry, the down side being that we move that input
parameter back and forth between r3 and r4. That can be optimised later.
Doing that also has the advantage of maximising the common parts between
tail calls and a normal function exit.
With the fix, tail call tests are now successfull:
Nicholas Piggin [Wed, 16 Nov 2022 04:39:53 +0000 (14:39 +1000)]
powerpc: Fix writable sections being moved into the rodata region
.data.rel.ro* catches .data.rel.root_cpuacct, and the kernel crashes on
a store in css_clear_dir. At least we know read-only data protection is
working...
Fixes: b6adc6d6d3272 ("powerpc/build: move .data.rel.ro, .sdata2 to read-only") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221116043954.3307852-1-npiggin@gmail.com
Angel Iglesias [Sun, 13 Nov 2022 17:46:30 +0000 (18:46 +0100)]
i2c: core: Introduce i2c_client_get_device_id helper function
Introduces new helper function to aid in .probe_new() refactors. In order
to use existing i2c_get_device_id() on the probe callback, the device
match table needs to be accessible in that function, which would require
bigger refactors in some drivers using the deprecated .probe callback.
This issue was discussed in more detail in the IIO mailing list.
Link: https://lore.kernel.org/all/20221023132302.911644-11-u.kleine-koenig@pengutronix.de/ Suggested-by: Nuno Sá <noname.nuno@gmail.com> Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
On 32-bit kernels, 64-bit syscall arguments are split into two
registers. For that to work with syscall wrappers, the prototype of the
syscall must have the argument split so that the wrapper macro properly
unpacks the arguments from pt_regs.
The fanotify_mark() syscall is one such syscall, which already has a
split prototype, guarded behind ARCH_SPLIT_ARG64.
So select ARCH_SPLIT_ARG64 to get that prototype and fix fanotify_mark()
on 32-bit kernels with syscall wrappers.
Note also that fanotify_mark() is the only usage of ARCH_SPLIT_ARG64.
Andreas Schwab [Mon, 31 Oct 2022 14:47:35 +0000 (15:47 +0100)]
powerpc/32: fix syscall wrappers with 64-bit arguments
With the introduction of syscall wrappers all wrappers for syscalls with
64-bit arguments must be handled specially, not only those that have
unaligned 64-bit arguments. This left out the fallocate() and
sync_file_range2() syscalls.
Fixes: 7e92e01b7245 ("powerpc: Provide syscall wrapper") Fixes: e23750623835 ("powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs") Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/87mt9cxd6g.fsf_-_@igel.home
Andreas Schwab [Mon, 31 Oct 2022 13:23:13 +0000 (14:23 +0100)]
asm-generic: compat: fix compat_arg_u64() and compat_arg_u64_dual()
The macros are defined backwards.
This affects the following compat syscalls:
- compat_sys_truncate64()
- compat_sys_ftruncate64()
- compat_sys_fallocate()
- compat_sys_sync_file_range()
- compat_sys_fadvise64_64()
- compat_sys_readahead()
- compat_sys_pread64()
- compat_sys_pwrite64()
Fixes: 43d5de2b67d7 ("asm-generic: compat: Support BE for long long args in 32-bit ABIs") Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
[mpe: Add list of affected syscalls] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/871qqoyvni.fsf_-_@igel.home
Michael Ellerman [Thu, 27 Oct 2022 12:56:26 +0000 (23:56 +1100)]
powerpc/64e: Fix amdgpu build on Book3E w/o AltiVec
There's a build failure for Book3E without AltiVec:
Error: cc1: error: AltiVec not supported in this target
make[6]: *** [/linux/scripts/Makefile.build:250:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o] Error 1
This happens because the amdgpu build is only gated by
PPC_LONG_DOUBLE_128, but that symbol can be enabled even though AltiVec
is disabled.
The only user of PPC_LONG_DOUBLE_128 is amdgpu, so just add a dependency
on AltiVec to that symbol to fix the build.
Michael Ellerman [Mon, 31 Oct 2022 06:37:21 +0000 (17:37 +1100)]
Merge tag 'v6.1-rc2' into fixes
Merge rc2 into our fixes branch, which was based on rc1 but wasn't
merged until rc3, so that for the remainder of the release our fixes
branch will be based on rc2 for the purposes of resolving conflicts with
other trees (if necessary).
Nicholas Piggin [Sat, 22 Oct 2022 05:22:07 +0000 (15:22 +1000)]
powerpc/64s/interrupt: Fix clear of PACA_IRQS_HARD_DIS when returning to soft-masked context
Commit a4cb3651a1743 ("powerpc/64s/interrupt: Fix lost interrupts when
returning to soft-masked context") fixed the problem of pending irqs
being cleared when clearing the HARD_DIS bit, but then it didn't clear
the bit at all. This change clears HARD_DIS without affecting other bits
in the mask.
When an interrupt hits in a soft-masked section that has MSR[EE]=1, it
can hard disable and set PACA_IRQS_HARD_DIS, which must be cleared when
returning to the EE=1 caller (unless it was set due to a MUST_HARD_MASK
interrupt becoming pending). Failure to clear this leaves the
returned-to context running with MSR[EE]=1 and PACA_IRQS_HARD_DIS, which
confuses irq assertions and could be dangerous for code that might test
the flag.
This was observed in a hash MMU kernel where a kernel hash fault hits in
a local_irqs_disabled region that has EE=1. The hash fault also runs
with EE=1, then as it returns, a decrementer hits in the restart section
and the irq restart code hard-masks which sets the PACA_IRQ_HARD_DIS
flag, which is not clear when the original context is returned to.
Reported-by: Sachin Sant <sachinp@linux.ibm.com> Fixes: a4cb3651a1743 ("powerpc/64s/interrupt: Fix lost interrupts when returning to soft-masked context") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221022052207.471328-1-npiggin@gmail.com
Linus Torvalds [Sun, 23 Oct 2022 22:00:43 +0000 (15:00 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
ARM:
- Fix a bug preventing restoring an ITS containing mappings for very
large and very sparse device topology
- Work around a relocation handling error when compiling the nVHE
object with profile optimisation
- Fix for stage-2 invalidation holding the VM MMU lock for too long
by limiting the walk to the largest block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
x86:
- add compat implementation for KVM_X86_SET_MSR_FILTER ioctl
selftests:
- synchronize includes between include/uapi and tools/include/uapi"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools: include: sync include/api/linux/kvm.h
KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
kvm: Add support for arch compat vm ioctls
RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
RISC-V: Fix compilation without RISCV_ISA_ZICBOM
KVM: arm64: vgic: Fix exit condition in scan_its_table()
KVM: arm64: nvhe: Fix build with profile optimization
KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
KVM: arm64: selftests: Fix multiple versions of GIC creation
KVM: arm64: Enable stack protection and branch profiling for VHE
KVM: arm64: Limit stage2_apply_range() batch size to largest block
KVM: arm64: Work out supported block level at compile time
It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver. Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.
Fixes: 72a95859728a ("mfd: syscon: Remove repetition of the regmap_get_val_endian()") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Lee Jones <lee@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 23 Oct 2022 19:01:01 +0000 (12:01 -0700)]
kernel/utsname_sysctl.c: Fix hostname polling
Commit bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added
a new entry to the uts_kern_table[] array, but didn't update the
UTS_PROC_xyz enumerators of older entries, breaking anything that used
them.
Which is admittedly not many cases: it's really just the two uses of
uts_proc_notify() in kernel/sys.c. But apparently journald-systemd
actually uses this to detect hostname changes.
Linus Torvalds [Sun, 23 Oct 2022 17:14:45 +0000 (10:14 -0700)]
Merge tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix raw data handling when perf events are used in bpf
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bpf: Fix sample_flags for bpf_perf_event_output
selftests/perf_events: Add a SIGTRAP stress test with disables
perf: Fix missing SIGTRAPs
projects / thirdparty / linux.git / log
