Jim Fehlig [Wed, 18 Mar 2015 20:53:45 +0000 (14:53 -0600)]
libxl: Don't overwrite errors from xenconfig
When converting domXML from native, the libxl driver was overwriting
useful errors from the xenconfig parsing code with a useless, generic
error. E.g. "internal error: parsing xm config failed" vs
"internal error: config value usbdevice was malformed". Remove the
redundant (and useless) error reporting in the libxl driver.
Laine Stump [Wed, 18 Mar 2015 18:27:05 +0000 (14:27 -0400)]
util: more verbose error when failing to create macvtap device
Investigation of a problem with creating passthrough macvtap devices
(https://bugzilla.redhat.com/show_bug.cgi?id=1185501) has shown that
this slightly more verbose failure message is useful. In particular,
the mac address can be used to determine the domain. You could also
figure this out by looking at preceding messages in a debug log, but
this gets it in a single place.
Peter Krempa [Thu, 12 Mar 2015 16:12:12 +0000 (17:12 +0100)]
qemu: driver: Fix cold-update of removable storage devices
Only selected fields from the disk source were copied when cold updating
source in a CDROM drive. When such drive was backed by a network file
this resulted into corruption of the definition:
Erik Skultety [Thu, 19 Feb 2015 15:53:13 +0000 (16:53 +0100)]
qemu: Check for negative port values in network drive configuration
We interpret port values as signed int (convert them from char *),
so if a negative value is provided in network disk's configuration,
we accept it as valid, however there's an 'unknown cause' error raised later.
This error is only accidental because we return the port value in the return code.
This patch adds just a minor tweak to the already existing check so we
reject negative values the same way as we reject non-numerical strings.
Eric Blake [Fri, 13 Mar 2015 15:56:48 +0000 (09:56 -0600)]
virsh: fix report of non-active commit completion
Commit f182da20 (v1.2.6) caused a slight regression in virsh
reporting of a non-active block job; where it used to state
"Commit complete", it now states "Now in synchronized phase".
But the synchronized phase is only possible for an active commit.
For a reproducer, I created a chain 'a <- b <- c <- d <- e' and
ran virsh blockcommit $dom vda --top c --base a --verbose --wait
* tools/virsh-domain.c (cmdBlockCommit): Synchronized phase is
only possible on active commits.
Problem Description:
After multiple times of migrating a domain, which has an ovs interface with no portData set,
with non-shared disk, nbd ports got overflowed.
The steps to reproduce the problem:
1 define and start a domain with its network configured as:
<interface type='bridge'>
<source bridge='br0'/>
<virtualport type='openvswitch'>
</virtualport>
<model type='virtio'/>
<driver name='vhost' queues='4'/>
</interface>
2 do not set the network's portData.
3 migrate(ToURI2) it with flag 91(1011011), which means:
VIR_MIGRATE_LIVE
VIR_MIGRATE_PEER2PEER
VIR_MIGRATE_PERSIST_DEST
VIR_MIGRATE_UNDEFINE_SOURCE
VIR_MIGRATE_NON_SHARED_DISK
4 migrate success, but we got an error log in libvirtd.log:
error : virCommandWait:2423 : internal error: Child process (ovs-vsctl --timeout=5 get Interface
vnet1 external_ids:PortData) unexpected exit status 1: ovs-vsctl: no key "PortData" in Interface
record "vnet1" column external_ids
5 migrate it back, migrate it , migrate it back, .......
6 nbd port got overflowed.
The reasons for the problem is :
1 virNetDevOpenvswitchGetMigrateData() takes it as wrong if no portData is available for the ovs
interface of a domain. (We think it's not appropriate, as portData is just OPTIONAL)
2 in func qemuMigrationBakeCookie(), it fails in qemuMigrationCookieAddNetwork(), and returns with -1.
qemuMigrationCookieAddNBD() is not called thereafter, and mig->nbd is still NULL.
3 However, qemuMigrationRun() just *WARN* if qemuMigrationBakeCookie() fails, migration still successes.
cookie is NULL, it's not baked on the src side.
4 On the destination side, it would alloc a port first and then free the nbd port in COOKIE.
But the cookie is NULL due to qemuMigrationCookieAddNetwork() failure at src side. thus the nbd port
is not freed.
In this patch, we add "--if-exists" option to make ovs-vsctl not raise error if there's no portData available.
Further more, because portData may be NULL in the cookie at the dest side, check it before setting portData.
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com> Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
(cherry picked from commit 25df57db73adc3e610193ee1fcdd202c47ba471d)
John Ferlan [Tue, 10 Mar 2015 23:14:31 +0000 (19:14 -0400)]
xenapi: Resolve Coverity REVERSE_INULL
Coverity notes in xenapiDomainGetXMLDesc that 'vms' is dereferenced
a few times before a "if (vms) xen_vm_set_free(vms);" call is made.
Since we'd exit out much sooner if the fetch of the vms failed, just
remove the unnecessary "if (vms)" check.
John Ferlan [Tue, 10 Mar 2015 23:10:34 +0000 (19:10 -0400)]
xenapi: Resolve Coverity REVERSE_INULL
Coverity complains that "net_set" is compared to NULL before calling
xen_network_set_free, but used rather liberally before that. While
I was looking at the code I also noted that if the virAsprintfQuiet
fails, then we leak our structures - so I added those too.
John Ferlan [Tue, 10 Mar 2015 22:52:07 +0000 (18:52 -0400)]
xenapi: Resolve Coverity NULL_RETURNS
Coverity points out that the return from virDomainDefParseString is
not checked in xenapiDomainCreateXML like it should be which could
end up in a NULL pointer dereference
John Ferlan [Tue, 10 Mar 2015 22:33:59 +0000 (18:33 -0400)]
xenapi: Resolve Coverity FORWARD_NULL
Since inception. Coverity complains that the code checks "(record ==
NULL && !session->ok)", but doesn't check (record != NULL) before
dereferencing at "record->is_a_template"
Michal Privoznik [Wed, 11 Mar 2015 08:54:29 +0000 (09:54 +0100)]
RNG: Allow multiple parameters to be passed to an interface filter
Our code supports that for ages. When using a <filterref/> to an
<interface/> several parameters can be passed to the filter. Later,
when building firewall rules, parameters are substituted for their
values. However, our RNG schema allowed only one parameter to be
passed.
Reported-by: Brian Rak <brak@gameservers.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 6cc5080a099a650c6cd98662219bfc5c9af153d7)
Michael Chapman [Wed, 11 Mar 2015 02:19:54 +0000 (13:19 +1100)]
domain_conf: fix crash in virDomainObjListFindByUUIDInternal
If a domain object is being removed and looked up concurrently we must
ensure we unlock the object before unreferencing it, since the latter
might free the object.
Michael Chapman [Wed, 11 Mar 2015 02:20:28 +0000 (13:20 +1100)]
{domain, network}_conf: disable autostart when deleting config
Undefining a running, autostarted domain removes the autostart link, but
dom->autostart is not cleared. If the domain is subsequently redefined,
libvirt thinks it is already autostarted and will not create the link
even if requested:
# virsh dominfo example | grep Autostart
Autostart: enable
# ls /etc/libvirt/qemu/autostart/example.xml
/etc/libvirt/qemu/autostart/example.xml
# virsh undefine example
Domain example has been undefined
# virsh define example.xml
Domain example defined from example.xml
# virsh dominfo example | grep Autostart
Autostart: enable
# virsh autostart example
Domain example marked as autostarted
# ls /etc/libvirt/qemu/autostart/example.xml
ls: cannot access /etc/libvirt/qemu/autostart/example.xml: No such file or directory
This commit ensures dom->autostart is cleared whenever the config and
autostart link (if present) are removed.
The bridge network driver cleared this flag itself in networkUndefine.
This commit moves this into virNetworkDeleteConfig for symmetry with
virDomainDeleteConfig, and to ensure it is not missed in future network
drivers.
Michal Privoznik [Tue, 10 Mar 2015 13:23:43 +0000 (14:23 +0100)]
virQEMUCapsInitQMP: Don't dispose locked @vm
When creating qemu capabilities, a dummy virDomainObj is created just
because our monitor code expects that. However, the object is created
locked already. Then, under cleanup label, we simply unref the object
which results in whole domain object to be disposed. The object lock
is destroyed subsequently, but hey - it's still locked:
==24845== Thread #14's call to pthread_mutex_destroy failed
==24845== with error code 16 (EBUSY: Device or resource busy)
==24845== at 0x4C3024E: pthread_mutex_destroy (in /usr/lib64/valgrind/vgpreload_helgrind-amd64-linux.so)
==24845== by 0x531F72E: virMutexDestroy (virthread.c:83)
==24845== by 0x5302977: virObjectLockableDispose (virobject.c:237)
==24845== by 0x5302A89: virObjectUnref (virobject.c:265)
==24845== by 0x1DD37866: virQEMUCapsInitQMP (qemu_capabilities.c:3397)
==24845== by 0x1DD37CC6: virQEMUCapsNewForBinary (qemu_capabilities.c:3481)
==24845== by 0x1DD381E2: virQEMUCapsCacheLookup (qemu_capabilities.c:3609)
==24845== by 0x1DD30F8A: virQEMUCapsInitGuest (qemu_capabilities.c:744)
==24845== by 0x1DD31889: virQEMUCapsInit (qemu_capabilities.c:1020)
==24845== by 0x1DD7DD36: virQEMUDriverCreateCapabilities (qemu_conf.c:888)
==24845== by 0x1DDC57C0: qemuStateInitialize (qemu_driver.c:803)
==24845== by 0x53DC743: virStateInitialize (libvirt.c:777)
==24845==
Chen Fan [Tue, 10 Mar 2015 05:56:11 +0000 (13:56 +0800)]
qemu: fix memory leak in qemuAgentGetFSInfo
in virDomainFSInfoFree(), don't free the virDomainFSInfo data.
==10670== 80 bytes in 2 blocks are definitely lost in loss record 576 of 793
==10670== at 0x4A06BC3: calloc (vg_replace_malloc.c:618)
==10670== by 0x509DEBD: virAlloc (viralloc.c:144)
==10670== by 0x19FBD558: qemuAgentGetFSInfo (qemu_agent.c:1837)
==10670== by 0x1A03CF91: qemuDomainGetFSInfo (qemu_driver.c:19238)
Jiri Denemark [Mon, 9 Mar 2015 12:12:36 +0000 (13:12 +0100)]
locking: Fix flags in virLockManagerLockDaemonNew
virLockManager*New APIs are never called with
VIR_LOCK_MANAGER_USES_STATE. Moreover, lockd driver does not maintain
any state that would need to be transferred during migration and thus it
should not mention VIR_LOCK_MANAGER_USES_STATE at all.
Pavel Hrdina [Sat, 7 Mar 2015 10:24:48 +0000 (11:24 +0100)]
tests: fix qemuxml2argvtest to be arch independent
Commit 5aee81a0 introduced a new test for disk-serial. The test fails
on i686 arch because there is no need to add "-cpu qemu32" to command
line. To fix the test update emulator in XML to "/usr/bin/qemu" so we
don't add the "-cpu qemu32" to command while running the test on i686 or
x86_64 host.
There's been a bug report appearing on the qemu-devel list, that
libvirt is unable to pass spaces in disk serial number [1]. Not only
our RNG schema forbids that, the code is not prepared either. However,
with a bit of escaping (if needed) we can allow spaces there.
Erik Skultety [Tue, 3 Mar 2015 15:57:38 +0000 (16:57 +0100)]
storage: tweak condition to properly test lseek
According to the POSIX standard, off_t (returned by lseek) is defined as
signed integral type no shorter than int. Because our offset variable is defined
as unsigned long long, the original check was passed successfully if UINT64_MAX had
been used as offset value, due to implicit conversion.
Erik Skultety [Tue, 24 Feb 2015 16:25:55 +0000 (17:25 +0100)]
virsh: tweak domif-getlink link state reporting message
According to docs, we only support 2 link states for an interface
up/down, 'up' being the default state if link state is unspecified in
domain's XML, so the message when no link state is provided should be
changed a little.
Shanzhi Yu [Sat, 28 Feb 2015 09:51:36 +0000 (17:51 +0800)]
qemu: snapshot: Don't skip check for qcow2 format with network disks
When the domain's source disk type is network, if source protocol is rbd
or sheepdog, the 'if().. break' will end the current case, which lead to
miss check the driver type is raw or qcow2. Libvirt will allow to create
internal snapshot for a running domain with raw format disk which based
on rbd storage.
While both protocols support internal snapshots of the disk qemu is not
able to use it as it requires some place to store the memory image. The
check if the disk is backed by a qcow2 image needs to be executed
always.
Michal Privoznik [Mon, 23 Feb 2015 14:05:44 +0000 (15:05 +0100)]
networkLookupByUUID: Improve error message
We have this function networkObjFromNetwork() which for given
virNetworkPtr tries to find corresponding virNetworkObjPtr. If no
object is found, a nice error message is printed out:
no network with matching uuid '$uuid' ($name)
Let's improve the error message produced by networkLookupByUUID to
follow that logic.
So, libvirt uses pid file to track pid of started qemus. Whenever
a domain is started, its pid is put into corresponding pid file.
The pid file path is generated based on domain name and stored
into domain object internals. However, it's not stored in the
status XML and therefore lost on daemon restarts. Hence, later,
when domain is being shut down, the daemon does not know which
pid file to unlink, and the correct pid file is left behind. To
avoid this, lets generate the pid file path again in
qemuProcessReconnect().
Reported-by: Luyao Huang <lhuang@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 63889e0c775010d8d70b71d25340bab995aa83ce)
Peter Krempa [Mon, 2 Mar 2015 16:21:23 +0000 (17:21 +0100)]
schema: Fix interface link state schema
In commit edd1295e1da6bfe8e4e257e5fbfad71ac0bf7c87 I've introduced an
XML element that allows to configure state of the network interface
link. Somehow the RNG schema hunk ended up in a weird place in the
network schema definition. Move it to the right place and add a test
case.
Note that the link state is set up via the monitor at VM startup so I
originally didn't think of adding a test case.
Since adding the support for scheduler policy settings in commit 8680ea97, there are two enums with the same information. That was
caused by rewriting the patch since first draft.
Find out thanks to clang, but there was no impact whatsoever.
The problem here was that when opening a channel, we were checking
whether the channel given is alias (can't be NULL for running domain) or
it's name, which can be NULL (for example with spicevmc). In case of
such domain qemuDomainOpenChannel() made the daemon crash.
STREQ_NULLABLE() is safe to use since the code in question is wrapped in
"if (name)" and is more readable, so use that instead of checking for
non-NULL "vm->def->channels[i]->target.name".
Add to the man page a more complete description of what exactly the
command expects on input and will return on output based on what is
currently supported.
Perhaps missing findPoolSources implementations are backends for
sheepdog and rbd. Also missing any backend is zfs.
John Ferlan [Wed, 25 Feb 2015 22:31:55 +0000 (17:31 -0500)]
iscsi: Adjust error message for findStorageSources backend
The virStorageBackendISCSIFindPoolSources API only needs the 'host' name
in order to discover iSCSI pools, it returns the various device paths.
On input, it's also possible to further restrict a search by providing the
port attribute for the host element and the (undocumented) initiator element.
For example:
$ virsh find-storage-pool-sources-as iscsi
error: Failed to find any iscsi pool sources
error: invalid argument: hostname and device path must be specified for iscsi sources
Modify the virsh man page to more accurately describe which values are
set by the virsh setmem and displayed by the virsh memtune or dominfo
based on the setmem command results.
Erik Skultety [Fri, 27 Feb 2015 11:45:57 +0000 (12:45 +0100)]
docs: add a note that attr 'managed' is only used by PCI devices
Our documentation isn't 100% clear about hostdev 'managed' attribute usage,
because it only makes sense to use it with PCI devices, yet we format
this attribute to all hostdev devices. By adding a note into the docs,
we can possibly avoid confusion from customer's side and also avoid a solution
using ternary logic.
storage: fs: Ignore volumes that fail to open with EACCESS/EPERM
Trying to use qemu:///session to create a storage pool pointing at
/tmp will usually fail with something like:
$ virsh pool-start tmp
error: Failed to start pool tmp
error: cannot open volume '/tmp/systemd-private-c38cf0418d7a4734a66a8175996c384f-colord.service-kEyiTA': Permission denied
If any volume in an FS pool can't be opened by the daemon, the refresh
fails, and the pool can't be used.
This causes pain for virt-install/virt-manager though. Imaging a user
downloads a disk image to /tmp. virt-manager wants to import /tmp as
a storage pool, so we can detect what disk format it is, and set the
XML correctly. However this case will likely fail as explained above.
Change the logic here to skip volumes that fail to open. This could
conceivably cause user complaints along the lines of 'why doesn't
libvirt show $ROOT-OWNED-VOLUME-FOO', but figuring that currently
the pool won't even startup, I don't think there are any current
users that care about that case.
domain: conf: Don't validate VM ostype/arch at daemon startup
When parsing XML, we validate the passed ostype + arch combo against
the detected hypervisor capabilities. This has led to the following
problem:
- Define x86 qemu guest
- qemu is inadvertently removed from the host
- libvirtd is restarted. fails to parse VM config since arch is removed
- 'virsh list --all' is now empty, user is wondering where their VMs went
Add a new internal flag VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS. Use
it when loading VM and snapshot configs from disk.
domain: conf: Better errors on bad os <type> values
If no <os><type> was specified:
before: unknown OS type no OS type
after : xml error: an os <type> must be specified
If an <os><type> is specified that's not in our capabiliities data:
before: unknown OS type: $type
after : unsupported configuration: no support found for os <type> '$type'
VIR_ERR_OS_TYPE is now unused (as it should be frankly) so drop its strings
as well to save our translators some effort.
spec: Point fedora --with-loader-nvram at nightly firmware repo
Fedora doesn't ship OVMF/AAVMF builds in its repos due to licensing
issues, so the recommended way to consume these bits is via Gerd's
nightly repo: https://www.kraxel.org/repos
Let's teach fedora builds about the loader/nvram pairs these packages
installed, so users don't need to edit qemu.conf to get virt-manager
UEFI support.
Jiri Denemark [Mon, 23 Mar 2015 16:19:28 +0000 (17:19 +0100)]
cpu: Add {Haswell,Broadwell}-noTSX CPU models
QEMU 2.3 adds these new models to cover Haswell and Broadwell CPUs with
updated microcode. Luckily, they also reverted former the machine type
specific changes to existing models. And since these changes were never
released, we don't need to hack around them in libvirt.
So we have this bug. The virConnectGetDomainCapabilities() API
performs a couple of checks before it produces any result. One of
the checks is if the architecture requested by user can be run by
the binary (again user provided). However, the check is pretty
dumb. It merely compares if the default binary architecture
matches the one provided by user. However, a qemu binary can run
multiple architectures. For instance: qemu-system-ppc64 can run:
ppc, ppcle, ppc64, ppc64le and ppcemb. The default is ppc64, so
if user requested something else, like ppc64le, the check would
have failed without obvious reason.
Peter Krempa [Wed, 25 Mar 2015 07:52:26 +0000 (08:52 +0100)]
daemon: Clear fake domain def object that is used to check ACL prior to use
The fake object is used to pass the domain name and UUID to the ACL code
for events where we don't have the full domain def when dispatching
events. The rest of the entries would be left uninitialized. While this
is not a problem code-wise as the used fields are initialized it looks
ugly in the debugger.
Peter Krempa [Wed, 25 Mar 2015 07:25:45 +0000 (08:25 +0100)]
util: identity: Harden virIdentitySetCurrent()
Don't unref the old identity unless we set the new one correctly and
unref the new one on failure to set it so that we don't leak any
references or use invalid pointers.
The only thing that will force the qemu driver to refresh it's cached
capablities info is an explict API call to GetCapabilities.
However in the case when the initial caps lookup at driver connect didn't
find a single qemu emulator to poll, the driver is effectively useless
and really can't do anything until it's populated some qemu capabilities
info.
With the above steps, the user would have to either know about the
magic refresh capabilities call, or restart libvirtd to pick up the
changes.
Instead, this patch changes things so that every time a part of th
driver requests access to capabilities info, check to see if
we've previously seen any emulators. If not, force a refresh.
In the case of 'still no emulators found', this is still very quick, so
I can't think of a downside.
qemu: Build channel autosocket directory at driver startup
Rather than depend on the RPM to put it in place, since this doesn't
cover the qemu:///session case. Currently auto allocated socket path is
completely busted with qemu:///session
==19015== 968 (416 direct, 552 indirect) bytes in 1 blocks are definitely lost in loss record 999 of 1,049
==19015== at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015== by 0x52ADF14: virAllocVar (viralloc.c:560)
==19015== by 0x5302FD1: virObjectNew (virobject.c:193)
==19015== by 0x1DD9401E: virQEMUDriverConfigNew (qemu_conf.c:164)
==19015== by 0x1DDDF65D: qemuStateInitialize (qemu_driver.c:666)
==19015== by 0x53E0823: virStateInitialize (libvirt.c:777)
==19015== by 0x11E067: daemonRunStateInit (libvirtd.c:905)
==19015== by 0x53201AD: virThreadHelper (virthread.c:206)
==19015== by 0xA1EE1F2: start_thread (in /lib64/libpthread-2.19.so)
==19015== by 0xA4EFC8C: clone (in /lib64/libc-2.19.so)
Peter Krempa [Tue, 24 Mar 2015 09:53:29 +0000 (10:53 +0100)]
util: buffer: Add support for adding text blocks with indentation
The current auto-indentation buffer code applies indentation only on
complete strings. To allow adding a string containing newlines and
having it properly indented this patch adds virBufferAddStr.
Ján Tomko [Tue, 14 Apr 2015 10:30:16 +0000 (12:30 +0200)]
Add functions dealing with control characters in strings
Add virStringHasControlChars that checks if the string has
any control characters other than \t\r\n,
and virStringStripControlChars that removes them in-place.
Commit a0670ae caused a regression in 'virsh event' and
'virsh qemu-monitor-event' - if a user tries to filter the
command to a specific domain, an error message is printed:
$ virsh event dom --loop
error: internal error: virsh qemu-monitor-event: no domain VSH_OT_DATA option
and then the command continues as though no domain had been
supplied (giving events for ALL domains, instead of the
requested one). This is because the code was incorrectly
assuming that all "domain" options would be supplied via a
mandatory VSH_OT_DATA, even though "domain" is optional for
these two commands, so we had changed them to VSH_OT_STRING
to quit failing for other reasons (ever since it was decided
that VSH_OT_DATA and VSH_OT_STRING should no longer be
synonyms).
In looking at the situation, though, the code for looking up
a domain was making a pointless check for whether the option
exists prior to finding the option's string value, as
vshCommandOptStringReq does just fine at reporting any errors
when looking up a string whether or not the option was present.
So this is a case of regression fixing by pure code deletion :)
Even though we have a mutex mechanism so that two clients don't spawn
two daemons, it's not strong enough. It can happen that while one
client is spawning the daemon, the other one fails to connect.
Basically two possible errors can happen:
error: Failed to connect socket to '/home/mprivozn/.cache/libvirt/libvirt-sock': Connection refused
or:
error: Failed to connect socket to '/home/mprivozn/.cache/libvirt/libvirt-sock': No such file or directory
The problem in both cases is, the daemon is only starting up, while we
are trying to connect (and fail). We should postpone the connecting
phase until the daemon is started (by the other thread that is
spawning it). In order to do that, create a file lock 'libvirt-lock'
in the directory where session daemon would create its socket. So even
when called from multiple processes, spawning a daemon will serialize
on the file lock. So only the first to come will spawn the daemon.
Tested-by: Richard W. M. Jones <rjones@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit be78814ae07f092d9c4e71fd82dd1947aba2f029)
Peter Krempa [Wed, 25 Mar 2015 07:56:07 +0000 (08:56 +0100)]
rpc: Don't unref identity object while callbacks still can be executed
While this thread is cleaning up the client and connection objects:
#2 virFileReadAll (path=0x7f28780012b0 "/proc/1319/stat", maxlen=maxlen@entry=1024, buf=buf@entry=0x7f289c60fc40) at util/virfile.c:1287
#3 0x00007f28adbb1539 in virProcessGetStartTime (pid=<optimized out>, timestamp=timestamp@entry=0x7f289c60fc98) at util/virprocess.c:838
#4 0x00007f28adb91981 in virIdentityGetSystem () at util/viridentity.c:151
#5 0x00007f28ae73f17c in remoteClientFreeFunc (data=<optimized out>) at remote.c:1131
#6 0x00007f28adcb7f33 in virNetServerClientDispose (obj=0x7f28aecad180) at rpc/virnetserverclient.c:858
#7 0x00007f28adba8eeb in virObjectUnref (anyobj=<optimized out>) at util/virobject.c:265
#8 0x00007f28ae74ad05 in virNetServerHandleJob (jobOpaque=<optimized out>, opaque=0x7f28aec93ff0) at rpc/virnetserver.c:205
#9 0x00007f28adbbef4e in virThreadPoolWorker (opaque=opaque@entry=0x7f28aec88030) at util/virthreadpool.c:145
In stack frame #6 the client->identity object got unref'd, but the code
that removes the event callbacks in frame #5 did not run yet as we are
trying to obtain the system identity (frames #4, #3, #2).
In other thead:
#0 virObjectUnref (anyobj=anyobj@entry=0x7f288c162c60) at util/virobject.c:264
klass = 0xdeadbeef
obj = 0x7f288c162c60
#1 0x00007f28ae71c709 in remoteRelayDomainEventCheckACL (client=<optimized out>, conn=<optimized out>, dom=dom@entry=0x7f28aecaafc0) at remote.c:164
#2 0x00007f28ae71fc83 in remoteRelayDomainEventTrayChange (conn=<optimized out>, dom=0x7f28aecaafc0, ... ) at remote.c:717
#3 0x00007f28adc04e53 in virDomainEventDispatchDefaultFunc (conn=0x7f287c0009a0, event=0x7f28aecab1a0, ...) at conf/domain_event.c:1455
#4 0x00007f28adc03831 in virObjectEventStateDispatchCallbacks (callbacks=<optimized out>, ....) at conf/object_event.c:724
#5 virObjectEventStateQueueDispatch (callbacks=0x7f288c083730, queue=0x7fff51f90030, state=0x7f288c18da20) at conf/object_event.c:738
#6 virObjectEventStateFlush (state=0x7f288c18da20) at conf/object_event.c:816
#7 virObjectEventTimer (timer=<optimized out>, opaque=0x7f288c18da20) at conf/object_event.c:562
#8 0x00007f28adb859cd in virEventPollDispatchTimeouts () at util/vireventpoll.c:459
Frame #0 is unrefing an invalid identity object while frame #2 hints
that the client is still dispatching the event.
For untrimmed backtrace see the bugzilla attachment.
lxc: create the required directories upon driver start
/var/run may reside on a tmpfs and we fail to create the PID file if
/var/run/lxc does not exist.
Since commit 0a8addc1, the lxc driver's state directory isn't
automatically created before starting a domain. Now, the lxc driver
makes sure the state directory exists when it initializes.
Eric Blake [Wed, 11 Mar 2015 20:37:04 +0000 (14:37 -0600)]
qemu: read backing chain names from qemu
https://bugzilla.redhat.com/show_bug.cgi?id=1199182 documents that
after a series of disk snapshots into existing destination images,
followed by active commits of the top image, it is possible for
qemu 2.2 and earlier to end up tracking a different name for the
image than what it would have had when opening the chain afresh.
That is, when starting with the chain 'a <- b <- c', the name
associated with 'b' is how it was spelled in the metadata of 'c',
but when starting with 'a', taking two snapshots into 'a <- b <- c',
then committing 'c' back into 'b', the name associated with 'b' is
now the name used when taking the first snapshot.
Sadly, older qemu doesn't know how to treat different spellings of
the same filename as identical files (it uses strcmp() instead of
checking for the same inode), which means libvirt's attempt to
commit an image using solely the names learned from qcow2 metadata
fails with a cryptic:
error: internal error: unable to execute QEMU command 'block-commit': Top image file /tmp/images/c/../b/b not found
even though the file exists. Trying to teach libvirt the rules on
which name qemu will expect is not worth the effort (besides, we'd
have to remember it across libvirtd restarts, and track whether a
file was opened via metadata or via snapshot creation for a given
qemu process); it is easier to just always directly ask qemu what
string it expects to see in the first place.
As a safety valve, we validate that any name returned by qemu
still maps to the same local file as we have tracked it, so that
a compromised qemu cannot accidentally cause us to act on an
incorrect file.
* src/qemu/qemu_monitor.h (qemuMonitorDiskNameLookup): New
prototype.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONDiskNameLookup):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorDiskNameLookup): New function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONDiskNameLookup)
(qemuMonitorJSONDiskNameLookupOne): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit)
(qemuDomainBlockJobImpl): Use it.
Eric Blake [Fri, 13 Mar 2015 23:01:43 +0000 (17:01 -0600)]
daemon: avoid memleak when ListAll returns nothing
Commit 4f25146 (v1.2.8) managed to silence Coverity, but at the
cost of a memory leak detected by valgrind:
==24129== 40 bytes in 5 blocks are definitely lost in loss record 355 of 637
==24129== at 0x4A08B1C: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==24129== by 0x5084B8E: virReallocN (viralloc.c:245)
==24129== by 0x514D5AA: virDomainObjListExport (domain_conf.c:22200)
==24129== by 0x201227DB: qemuConnectListAllDomains (qemu_driver.c:18042)
==24129== by 0x51CC1B6: virConnectListAllDomains (libvirt-domain.c:6797)
==24129== by 0x14173D: remoteDispatchConnectListAllDomains (remote.c:1580)
==24129== by 0x121BE1: remoteDispatchConnectListAllDomainsHelper (remote_dispatch.h:1072)
In short, every time a client calls a ListAll variant and asks
for the resulting list, but there are 0 elements to return, we
end up leaking the 1-entry array that holds the NULL terminator.
What's worse, a read-only client can access these functions in a
tight loop to cause libvirtd to eventually run out of memory; and
this can be considered a denial of service attack against more
privileged clients. Thankfully, the leak is so small (8 bytes per
call) that you would already have some other denial of service with
any guest calling the API that frequently, so an out-of-memory
crash is unlikely enough that this did not warrant a CVE.
Laine Stump [Tue, 10 Mar 2015 06:09:24 +0000 (02:09 -0400)]
qemu: don't fill in nicindexes for session mode libvirtd
Commit 4bbe1029f fixed a problem in commit f7afeddc by moving the call
to virNetDevGetIndex() to a location common to all interface types (so
that the nicindex array would be filled in for macvtap as well as tap
interfaces), but the location was *too* common, as the original call
to virNetDevGetIndex() had been in a section qualified by "if
(cfg->privileged)". The result was that the "fixed" libvirtd would try
to call virNetDevGetIndex() even for session mode libvirtd, and end up
failing with the log message:
Unable to open control socket: Operation not permitted
To remedy that, this patch qualifies the call to virNetDevGetIndex()
in its new location with cfg->privileged.
This resolves https://bugzilla.redhat.com/show_bug.cgi?id=1198244
Michal Privoznik [Fri, 27 Feb 2015 15:11:25 +0000 (16:11 +0100)]
docs: Add mist.io as libvirt-based application
As reported on the libvirt-users list [1], there's new web
application called mist.io which uses libvirt as one of its
backends. Lets add it into our list of libivrt based
applications.
Ján Tomko [Thu, 26 Feb 2015 13:33:26 +0000 (14:33 +0100)]
Ignore listen attribute of <graphics> for type network listens
Commit 6992994 started filling the listen attribute
of the parent <graphics> elements from type='network' listens.
When this XML is passed to UpdateDevice, parsing fails:
XML error: graphics listen attribute 10.20.30.40 must match
address attribute of first listen element (found none)
Ignore the address in the parent <graphics> attribute
when no type='address' listens are found,
the same we ignore the address for the <listen> subelements
when parsing inactive XML.
Peter Krempa [Thu, 26 Feb 2015 09:35:47 +0000 (10:35 +0100)]
util: storage: Fix error type in virStorageSourceParseBackingURI
The gluster volume name extraction code was copied from the XML parser
without changing the VIR_ERR_XML_ERROR error code. Use
VIR_ERR_CONFIG_UNSUPPORTED instead.
Peter Krempa [Thu, 26 Feb 2015 09:28:21 +0000 (10:28 +0100)]
util: storagefile: Don't crash on gluster URIs without path
Similar to commit fdb80ed4f6563928b9942a0d1450e0c725aa6c06 libvirtd
would crash if a gluster URI without path would be used in the backing
chain of a volume. The crash happens in the gluster specific part of the
parser that extracts the gluster volume name from the path.
Fix the crash by checking that the PATH is NULL.
This patch does not contain a test case as it's not possible to test it
with the current infrastructure as the test suite would attempt to
contact the gluster server in the URI. I'm working on the test suite
addition but that will be post-release material.
Laine Stump [Fri, 20 Feb 2015 19:52:37 +0000 (14:52 -0500)]
qemu: fix ifindex array reported to systemd
Commit f7afeddc added code to report to systemd an array of interface
indexes for all tap devices used by a guest. Unfortunately it not only
didn't add code to report the ifindexes for macvtap interfaces
(interface type='direct') or the tap devices used by type='ethernet',
it ended up sending "-1" as the ifindex for each macvtap or hostdev
interface. This resulted in a failure to start any domain that had a
macvtap or hostdev interface (or actually any type other than
"network" or "bridge").
This patch does the following with the nicindexes array:
1) Modify qemuBuildInterfaceCommandLine() to only fill in the
nicindexes array if given a non-NULL pointer to an array (and modifies
the test jig calls to the function to send NULL). This is because
there are tests in the test suite that have type='ethernet' and still
have an ifname specified, but that device of course doesn't actually
exist on the test system, so attempts to call virNetDevGetIndex() will
fail.
2) Even then, only add an entry to the nicindexes array for
appropriate types, and to do so for all appropriate types ("network",
"bridge", and "direct"), but only if the ifname is known (since that
is required to call virNetDevGetIndex().
Laine Stump [Tue, 24 Feb 2015 18:17:24 +0000 (13:17 -0500)]
util: check for null ifname inside virNetDevBandwidthSet()
Previously this function relied on having ATTRIBUTE_NONNULL(1) in its
prototype rather than explicitly checking for a null
ifname. Unfortunately, ATTRIBUTE_NONNULL is just a hint to the
optimizer and code analyzers like Coverity, it doesn't actually check
anything at execution time, so the result was possible warnings from
Coverity, along with the possibility of null dereferences when ifname
wasn't available.
This patch removes the ATTRIBUTE_NONNULL from the prototype, and
checks ifname inside the function, logging an error if it's NULL (once
we've determined that the user really is trying to set a bandwidth).
Laine Stump [Tue, 24 Feb 2015 17:12:56 +0000 (12:12 -0500)]
network: only clear bandwidth if it has been set
libvirt was unconditionally calling virNetDevBandwidthClear() for
every interface (and network bridge) of a type that supported
bandwidth, whether it actually had anything set or not. This doesn't
hurt anything (unless ifname == NULL!), but is wasteful.
This patch makes sure that all calls to virNetDevBandwidthClear() are
qualified by checking that the interface really had some bandwidth
setup done, and checks for a null ifname inside
virNetDevBandwidthClear(), silently returning success if it is null
(as well as removing the ATTRIBUTE_NONNULL from that function's
prototype, since we can't guarantee that it is never null,
e.g. sometimes a type='ethernet' interface has no ifname as it is
provided on the fly by qemu).
Peter Krempa [Wed, 25 Feb 2015 10:19:15 +0000 (11:19 +0100)]
schema: Allow interleaving the /domain/os/type element
The element wasn't declared under the interleave thus it was required
always to be first. This made it inconvenient when pasting new stuff to
the XML manually in the "wrong" place.
The "virtio-mmio" is perfectly valid address type which we parse and
format correctly, but it's missing in our RNG schemas, hence editing a
domain with device having such address fails the validation.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Soo. you've successfully started yourself a domain. And since you want
to use it on your host exclusively you are confident enough to
passthrough the host CPU model, like this:
<cpu mode='host-passthrough'/>
Then, after a while, you want to save the domain into a file (e.g.
virsh save dom dom.save). And here comes the trouble. The file consist
of two parts: Libvirt header (containing domain XML among other
things), and qemu migration data. Now, the domain XML in the header is
formatted using special flags (VIR_DOMAIN_XML_SECURE |
VIR_DOMAIN_XML_UPDATE_CPU | VIR_DOMAIN_XML_INACTIVE |
VIR_DOMAIN_XML_MIGRATABLE).
Then, on your way back from the bar, you think of changing something
in the XML in the saved file (we have a command for it after all), say
listen address for graphics console. So you successfully type in the
command:
virsh save-image-edit dom.save
Change all the bits, and exit the editor. But instead of success
you're left with sad error message:
error: unsupported configuration: Target CPU model <null> does not
match source Pentium Pro
Sigh. Digging into the code you see lines, where we check for ABI
stability. The new XML you've produced is compared with the old one
from the saved file to see if qemu ABI will break or not. Wait, what?
We are using different flags to parse the XML you've provided so we
were just lucky it worked in some cases? Yep, that's right.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 18 Feb 2015 17:06:44 +0000 (18:06 +0100)]
virCPUDefFormatBufFull: Use our general error handling pattern
Well, so far there are no variables to free, no cleanup work needed on
an error, so bare 'return -1;' after each error is just okay. But this
will change in a while.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
With one exception: there's no re-indentation applied to @buf1.
The idea is, that in general both can have different indentation
(like the test I'm adding proves)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Pavel Hrdina [Tue, 24 Feb 2015 13:31:37 +0000 (14:31 +0100)]
qemu: fix memory leak while starting a guest
In commit cc41c648 I've re-factored qemuMonitorFindBalloonObjectPath, but
missed that there is a memory leak. The "nextpath" variable is
overwritten while looping in for cycle and we have to free it before next
cycle.
While the restriction doesn't have origin in any RFC, it matters
to us while constructing the dnsmasq config file (or command line
previously). For better picture, this is how the corresponding
part of network XML look like:
Prevent default creation of usb controller on s390 and s390x
Since s390 does not support usb the default creation of a usb controller
for a domain should not occur.
Also adjust s390 test cases by removing usb device instances since
usb devices are no longer created by default for s390 the s390
test cases need to be adjusted.
Signed-off-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Daniel Hansel [Wed, 18 Feb 2015 13:53:32 +0000 (14:53 +0100)]
man: moved virsh command cpu-models
The description of the virsh command 'cpu-models' was written in the
wrong context (i.e. beside the domain states).
This patch moves the command description just to the cpu related
commands like 'cpu-baseline' and 'cpu-compare'.
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
projects / thirdparty / libvirt.git / log
