New peripherals: vicap on px30 and rk356x, PCIe Gen2x1 on RK3528,
use actual clock-ids for SCMI clocks - not hardcoded numbers,
CQE support for the eMMC on RK3588.
As well as a number of enablements for individual boards.
For example enablement for the now usable NPU.
* tag 'v6.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (43 commits)
arm64: dts: rockchip: add vicap node to rk356x
arm64: dts: rockchip: add the vip node to px30
arm64: dts: rockchip: fixes audio for 100ASK DshanPi A1
arm64: dts: rockchip: fixes vcc3v3_s0 supply for 100ASK DshanPi A1
arm64: dts: rockchip: fixes ethernet for 100ASK DshanPi A1
arm64: dts: rockchip: fixes regulator for 100ASK DshanPi A1
arm64: dts: rockchip: correct assigned-clock-rates spelling on 2 boards
arm64: dts: rockchip: clean up devicetree for 9Tripod X3568 v4
arm64: dts: rockchip: Enable USB-C DP Alt for Indiedroid Nova
arm64: dts: rockchip: add eMMC CQE support for rk3588
arm64: dts: rockchip: enable HDMI audio on Rock 5 ITX
arm64: dts: rockchip: Add eeprom vcc-supply for Radxa ROCK 3C
arm64: dts: rockchip: Add eeprom vcc-supply for Radxa ROCK 5A
arm64: dts: rockchip: Move the EEPROM to correct I2C bus on Radxa ROCK 5A
arm64: dts: rockchip: use SCMI clock id for gpu clock on rk356x
arm64: dts: rockchip: Remove sdmmc max-frequency on RK3588S EVB1 board
arm64: dts: rockchip: Remove sdmmc max-frequency for Radxa ROCK 5 ITX/5B/5B+/5T
arm64: dts: rockchip: Switch microSD card detect to gpio on Radxa ROCK 5 ITX/5C
arm64: dts: rockchip: Add devicetree for the 9Tripod X3568 v4
dt-bindings: arm: rockchip: Add 9Tripod X3568 series
...
Arnd Bergmann [Fri, 21 Nov 2025 16:24:41 +0000 (17:24 +0100)]
Merge tag 'qcom-arm64-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.19
Introduce support for the Redxa Dragon Q6A development board, the Huawei
MateBoot E 2019, the Asus ZenFone 2 Laser/Selfie, the MSM8937 platform
and the Xiaomo Redmi 3S device based on it.
SoC dtsi files for Agatti, Hamoa, Kodiak, Monaco, Purwa, and Talos, are
renamed in order to better facilitate the addition of new boards on the
various SKUs of these.
Cooling maps are introduced for the CPU cores in IPQ5424, and the
network subsystem clock controller is added.
On Lemans, RTC is enabled, the EVK fan controller is described and a
camera mezzanine overlay is introduced.
Touchscreen support is added to the BQ Aquaris M5, and the touchscreen
from Samsung Galaxy Core Prime is moved to the common platform to
benefit the other devices sharing common definitions.
On Agatti two more UARTs are described, as well as APR and the related audio
services, and the LPASS LPI pin controller. The RB1 board gets HDMI
autio playback support.
On Kodiak-based targets, Fairphone FP5 gains definitions of the UW camera
actuator, regulator for the ToF sensor, and haptic module. The SHIFT
SHIFTphone 8 gains RGB and flash LEDs, and Venus support. The Rb3Gen2
development board gets QUP firmware path defined, to support dynamic
loading of the serial engine firmware. Kodiak also gains Coresight
devices for AOSS and QDSS blocks.
Display support is added for the Talos platform, and enabled on the Ride
board. Talos also gains the definitions to scale DDR and L3
interconnects.
On SC8280XP, the camera privacy indicator on Lenovo Thinkpad X13s is
connected to the camera stack. Off-by-one GPI DMA channels are
corrected.
The SDM845-based LG and OnePlus custom defined rmtfs guard pages are
replaced with the inline-support for guard pages.
SDX75 DWC3 node is flattened and marked for USB role switching.
On SM8550, the camera subsystem and the S5K3M5 camera sensor is
introduced for the QRD, and an overlay for the "Rear Camera Card" for
the Hardware Development Kit (HDK) is introduced.
USB support is introduce for the SM8750 platform, and enabled in the MTP
and QRD devices.
On Hamoa, like on other devices the Asus Zenbook A14 definition of the
eDP panel is reworked to support both LCD and OLED configurations. WiFi
and Bluetooth is also enabled on the A14. The CRD gains support for
controlling charge limits.
The refgen regulator supplying DSI is defined and wired up on a variety
of platforms.
* tag 'qcom-arm64-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (138 commits)
arm64: dts: qcom: sdx75: Add missing usb-role-switch property
arm64: dts: qcom: sdx75: Flatten usb controller node
arm64: dts: qcom: HAMOA-IOT-SOM: Unreserve GPIOs blocking SPI11 access
arm64: dts: qcom: qrb2210-rb1: Fix UART3 wakeup IRQ storm
Revert "arm64: dts: qcom: sc7280: Increase config size to 256MB for ECAM feature"
arm64: dts: qcom: kodiak: add coresight nodes
arm64: dts: qcom: sdm845-oneplus: Describe TE gpio
arm64: dts: qcom: sdm845-oneplus: Implement panel sleep pinctrl
arm64: dts: qcom: sdm845-oneplus: Group panel pinctrl
arm64: dts: qcom: sdm845-oneplus: Update compatbible and add DDIC supplies
arm64: dts: qcom: qcs6490-rb3gen2: Rename vph-pwr regulator node
arm64: dts: qcom: qcm6490-fairphone-fp5: Add UW cam actuator
arm64: dts: qcom: qcm6490-fairphone-fp5: Enable CCI pull-up
arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform
arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform
arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs
arm64: dts: qcom: rename x1p42100 to purwa
arm64: dts: qcom: rename sc7280 to kodiak
arm64: dts: qcom: rename qcm2290 to agatti
arm64: dts: qcom: add gpu_zap_shader label
...
Arnd Bergmann [Fri, 21 Nov 2025 16:21:11 +0000 (17:21 +0100)]
Merge tag 'qcom-arm32-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.19
In addition to a variety of cleanups and reordering of nodes, four GSBIs
are added to the MSM8960 platform.
On the MSM8226-based Samsung Galaxy Grand 2, a simple framebuffer is
defined.
* tag 'qcom-arm32-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8226-samsung-ms013g: add simple-framebuffer
ARM: dts: qcom: msm8960: rename msmgpio node to tlmm
ARM: dts: qcom: msm8960: add I2C nodes for gsbi1 and gsbi8
ARM: dts: qcom: msm8960: add I2C nodes for gsbi10 and gsbi12
ARM: dts: qcom: msm8960: inline qcom-msm8960-pins.dtsi
ARM: dts: qcom: msm8960: reorder nodes and properties
Arnd Bergmann [Fri, 21 Nov 2025 16:15:07 +0000 (17:15 +0100)]
Merge tag 'ti-k3-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.19
Generic fixes and cleanups:
* Multiple SoCs: Disable CPSW in SoC files and
enable them in board files for better board-level control
* Replace rgmii-rxid with rgmii-id for CPSW ports across multiple boards
New Boards/SoM:
* AM62L SoC and basic support for EVM
* Toradex Aquila AM69 board support
* Kontron SMARC-sAM67 module and ADS2 carrier board support
Platform wide:
* Define possible system states amd wakeup-source (AM62/AM62A/AM62P)
SoC/EVM specific changes:
AM62:
* Add RNG node
* Add OLDI support
AM62P:
* Move audio_refclk to common main dtsi (k3-am62p-j722s-common-main)
* Fix memory ranges for GPU
AM62D2:
* Enable PMIC support on EVM
* Misc fixes
AM64:
* Add DMA support for TSCADC on EVM
AM69:
* Add Aquila board support with Clover variant
J722S:
* Fix audio refclk source in main dtsi
* Explicitly use PLL1_HSDIV6 audio refclk for EVM
J784S4/J742S2:
* Add bootph-all tag to support PCIe boot
Variscite VAR-SOM-AM62P:
* Add support for ADS7846 touchscreen
* Add support for WM8904 audio codec
* tag 'ti-k3-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (42 commits)
arm64: dts: ti: k3-am62l: add initial reference board file
arm64: dts: ti: k3-am62l: add initial infrastructure
dt-bindings: arm: ti: Add binding for AM62L SoCs
arm64: dts: ti: am69-aquila: Add Clover
arm64: dts: ti: Add Aquila AM69 Support
dt-bindings: arm: ti: add Toradex Aquila AM69
arm64: dts: ti: k3-j721s2: disable "mcu_cpsw" in SoC file and enable in board files
arm64: dts: ti: k3-j721e: disable "mcu_cpsw" in SoC file and enable it in board file
arm64: dts: ti: k3-j7200: disable "mcu_cpsw" in SoC file and enable in board file
arm64: dts: ti: k3-am65: disable "mcu_cpsw" in SoC file and enable in board file
arm64: dts: ti: k3-am62: disable "cpsw3g" in SoC file and enable in board file
arm64: dts: ti: k3-am62p5-sk: Set wakeup-source system-states
arm64: dts: ti: k3-am62a7-sk: Set wakeup-source system-states
arm64: dts: ti: k3-am62-lp-sk: Set wakeup-source system-states
arm64: dts: ti: k3-am62p: Define possible system states
arm64: dts: ti: k3-am62a: Define possible system states
arm64: dts: ti: k3-am62: Define possible system states
arm64: dts: ti: k3-am62p-j722s-common-main: move audio_refclk here
arm64: dts: ti: k3-*: Replace rgmii-rxid with rgmii-id for CPSW ports
arm64: dts: ti: k3-am642-tqma64xxl: add boot phase tags
...
Arnd Bergmann [Fri, 21 Nov 2025 16:13:50 +0000 (17:13 +0100)]
Merge tag 'socfpga_dts_updates_for_v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.19
- Add 4-bit SPI bus width(n5x, stratix10, agilex and agilex5)
- Agilex5 updates:
- Add GMAC0 for NAND daughter card
- Add SMMU support
- Add VGIC maintenance interrupt
- Add L2 and L3 cache
- Add support for the 013b board
- Add I3C support
- Add support for the Enclustra Mercury+ SA1 SoM based on Cyclone5
- Add support for Agilex3 board(a variant of the Agilex5 board)
- dt-bindings update:
- Document iommu in cdns,hp-nfc, snps,dw-axi-dmac and Agilex5
- Document Enclustra Mercury SA1 and AA1 boards
- Document Agilex5 013b board
- Document Agilex3 board
- Fix dtbs_check warnings:
- stratix10-swvp
- Agilex(NAND and Clock manager)
- Move sdmmc-ecc to base DTSI file(Stratix10)
* tag 'socfpga_dts_updates_for_v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (35 commits)
arm64: dts: socfpga: agilex5: update qspi partitions for 013b board
arm64: dts: socfpga: add Agilex3 board
dt-bindings: intel: Add Agilex3 SoCFPGA board
arm64: dts: intel: agilex5: Add Altera compatible for I3C controllers
arm64: dts: socfpga: Add Agilex5 SVC node with memory region
dt-bindings: firmware: svc: Add IOMMU support for Agilex5
arm64: dts: socfpga: agilex5: Add SMMU-V3-PMCG nodes
arm64: dts: socfpga: agilex5: Add L2 and L3 cache
arm64: dts: socfpga: agilex5: fix CHECK_DTBS warning for NAND
arm64: dts: socfpga: agilex5: add support for 013b board
dt-bindings: intel: Add Agilex5 SoCFPGA 013b board
arm64: dts: socfpga: agilex5: add VGIC maintenance interrupt
arm64: dts: socfpga: agilex: fix dtbs_check warning for NAND
arm64: dts: socfpga: agilex: fix dtbs_check warning for clock manager
arm64: dts: socfpga: stratix10-swvp: fix dtbs_check warnings swvp
arm64: dts: socfpga: move sdmmc-ecc to the base DTSI file
ARM: dts: socfpga: add Enclustra SoM dts files
dt-bindings: altera: removal of generic PE1 dts
ARM: dts: socfpga: removal of generic PE1 dts
dt-bindings: altera: add Mercury AA1 variants
...
Arnd Bergmann [Fri, 21 Nov 2025 16:10:41 +0000 (17:10 +0100)]
Merge tag 'imx-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.19:
- New board support: Protonic PRT8ML, Toradex SMARC iMX95, Skov Rev.C
HDMI, i.MX 95 Verdin Evaluation KitPHYTEC phyBOARD-Segin-i.MX91 board,
Skov i.MX8MP variant
- A series from Alexander Stein to clean up and improve imx95-tqma9596sa
board support
- Add MicIn routing support for mba8mx boards
- A couple of patch sets from Frank Li to clean up dt-schema warnings
and add more device support for imx8dxl and imx8qxp boards
- A series from Ioana Ciornei to add FPGA based GPIO controller and SFP+
cages for layerscape boards
- A change from Jan Petrous to add GMAC Ethernet for S32G2 EVB, RDB2 and
S32G3 RDB3 boards
- A series from Markus Niebel to improve imx95-tqma9596sa board support
- A couple of changes from Martin Kepplinger-Novaković to enable cpuidle
cooling device support for imx8mp
- A series from Max Krummenacher to clean up todo and add thermal
support for imx8-apalis board
- A series from Primoz Fiser to add USB vbus regulators, jtag and
pwm-fan overlay for imx93-phyboard
- A couple of series from Richard Zhu to add supports-clkreq property
and vpcie3v3aux regulator for PCIe M.2 device
- A series from Stefano Radaelli to add WiFi, BT, PMIC, WM8904 audio,
and ADS7846 touchscreen support for imx93-var-som
- A series from Tim Harvey to make some cleanups for imx8mm-venice
boards
- A change from Xu Yang to add DDR Perf Monitor support for i.MX94
- Other small and random changes
* tag 'imx-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (122 commits)
arm64: dts: freescale: add Toradex SMARC iMX95
arm64: dts: freescale: tqma9352: Add vcc-supply for spi-nor
arm64: dts: mb-smarc-2: Add MicIn routing
arm64: dts: mba8xx: Add MicIn routing
arm64: dts: mba8mx: Add MicIn routing
arm64: dts: imx8mp: make 'dsp' node depend on 'aips5'
arm64: dts: imx8mp: convert 'aips5' to 'aipstz5'
arm64: dts: imx8mp-skov: add Rev.C HDMI support
arm64: dts: imx8mp: Add missing LED enumerators for DH electronics i.MX8M Plus DHCOM on PDK2
arm64: dts: freescale: Add GMAC Ethernet for S32G2 EVB and RDB2 and S32G3 RDB3
arm64: dts: imx8qm-apalis: add pwm used by the backlight
arm64: dts: imx95-tqma9596sa-mb-smarc-2: add aliases for SPI
arm64: dts: imx95-tqma9596sa-mb-smarc-2: remove superfluous line
arm64: dts: imx95-tqma9596sa-mb-smarc-2: mark LPUART1 as reserved
arm64: dts: imx95-tqma9596sa-mb-smarc-2: Add MicIn routing
arm64: dts: imx95-tqma9596sa: add EEPROM pagesize
arm64: dts: imx95-tqma9596sa: whitespace fixes
arm64: dts: imx95-tqma9596sa: add gpio bus recovery for i2c
arm64: dts: imx95-tqma9596sa: remove superfluous pinmux for usdhci
arm64: dts: imx95-tqma9596sa: remove superfluous pinmux for i2c
...
Arnd Bergmann [Fri, 21 Nov 2025 16:04:25 +0000 (17:04 +0100)]
Merge tag 'imx-dt-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.19:
- A bunch of dt-schema warning cleanup patches from Frank Li
- A couple of imx6dl-yapp4 board update from Michal Vokáč to enable
pwm-beeper and model the RGB LED as a single multi-led part
- Enable PMIC RTC on imx53-qsrb board
- Correct rtc compatible for imx6q-evi board
- Add sy7636 support for e70k02 board
- Replace license text comment with SPDX identifier for imx53-usbarmory
board
- Add I2S audio support for imx28-amarula-rmm board
* tag 'imx-dt-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (29 commits)
ARM: dts: imx6qdl: make VAR-SOM SoM SoC-agnostic
ARM: dts: imx6dl-yapp4: Model the RGB LED as a single multi-led part
ARM: dts: imx6dl-yapp43: Enable pwm-beeper on boards with speaker
ARM: dts: imx: e70k02: add sy7636
ARM: dts: imx28-amarula-rmm: add I2S audio
ARM: dts: imx: add vdd-supply and vddio-supply for fsl,mpl3115
ARM: dts: imx7ulp: remove bias-pull-up
ARM: dts: remove undocumented clock-names for ov5642
ARM: dts: add device_type for memory node
ARM: dts: Add bus type for parallel ov5640
ARM: dts: imx6q-cm-fx6.dts: add supplies for wm8731
ARM: dts: imx6qdl-skov-cpu fix typo interrupt
ARM: dts: imx: remove redundant linux,phandle
ARM: dts: imx6ull-dhcom-pdk2: rename power-supply to vcc-supply for touchscreen
ARM: dts: imx: add power-supply for lcd panel
ARM: dts: imx6qdl-nitrogen6_max: rename i2c<n>mux to i2c
ARM: dts: imx6ull-phytec-tauri: remove extra space before jedec,spi-nor
ARM: dts: imx6q-utilite-pro: add missing required property for pci
ARM: dts: imx6-tbs2910: rename ir_recv to ir-receiver
ARM: dts: imx6: remove pinctrl-name if pinctrl-0 doesn't exist
...
Arnd Bergmann [Fri, 21 Nov 2025 15:54:51 +0000 (16:54 +0100)]
Merge tag 'tegra-for-6.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.19-rc1
This contains a bunch of additions and improvements for older devices.
Tegra210 devices now have empty reserved-memory nodes to improve inter-
operability with certain bootloaders. These chips now also support more
multimedia engines. A new variant of the Jetson Nano is also added.
Jetson TX2 sees some improvements. PCI endpoint mode is improved for
Tegra234 so that reset interrupts are properly routed.
A new RTC device is added starting with Orin.
Rounding things off is a flurry of small fixes for DT validation and USB
OTG mode.
* tag 'tegra-for-6.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (25 commits)
arm64: tegra: Remove OTG ID GPIO from Jetson TX2 NX
arm64: tegra: Set USB Micro-B port to OTG mode on P3450
arm64: tegra: Add NVJPG node for Tegra210 platforms
arm64: tegra: Add Tegra210 NVJPG power-domain node
arm64: tegra: Add interrupts for Tegra234 USB wake events
arm64: tegra: Add reserved-memory node for P2180
arm64: tegra: Add reserved-memory node for P3450
arm64: tegra: Enable NVDEC and NVENC on Tegra210
arm64: tegra: Fix APB DMA controller node name
arm64: tegra: Add default GIC address cells on Tegra210
arm64: tegra: Add default GIC address cells on Tegra194
arm64: tegra: Add default GIC address cells on Tegra186
arm64: tegra: Add default GIC address cells on Tegra132
arm64: tegra: Add OPP tables on Tegra210
arm64: tegra: Add interconnect properties for Tegra210
arm64: tegra: Add ACTMON on Tegra210
arm64: tegra: Add device-tree node for NVVRS RTC
arm64: tegra: Move avdd-dsi-csi-supply into CSI node
arm64: tegra: Drop redundant clock and reset names from TSEC node
arm64: tegra: Move HDA into the correct bus
...
Arnd Bergmann [Fri, 21 Nov 2025 15:50:42 +0000 (16:50 +0100)]
Merge tag 'tegra-for-6.19-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.19-rc1
Add more host1x devices on Tegra114 and Tegra124, as well as CSI for
Tegra20 and Tegra30. Support for the Xiaomi Mi Pad is also added.
* tag 'tegra-for-6.19-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add device-tree for Xiaomi Mi Pad (A0101)
ARM: tegra: add CSI nodes for Tegra20 and Tegra30
ARM: tegra: Add missing HOST1X device nodes on Tegra124
ARM: tegra: Add missing HOST1X device nodes on Tegra114
Arnd Bergmann [Fri, 21 Nov 2025 15:49:08 +0000 (16:49 +0100)]
Merge tag 'tegra-for-6.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.19-rc1
Document various new IPs on older chips, as well as some existing
developer kits that were missing compatible strings. Add power domain
IDs on Tegra264 and wake-up support for the XUSB controller on Tegra234.
* tag 'tegra-for-6.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: usb: Add wake-up support for Tegra234 XUSB host controller
dt-bindings: devfreq: tegra30-actmon: Add Tegra124 fallback for Tegra210
dt-bindings: display: tegra: Document Tegra20 and Tegra30 CSI
dt-bindings: display: tegra: document EPP, ISP, MPE and TSEC for Tegra114+
dt-bindings: arm: tegra: Document Jetson Nano Devkits
dt-bindings: power: Add power domain IDs for Tegra264
Arnd Bergmann [Fri, 21 Nov 2025 15:46:09 +0000 (16:46 +0100)]
Merge tag 'renesas-dts-for-v6.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.19 (take two)
- Add Imagination Technologies PowerVR Series 7XE GE7800 GPU support
for the R-Car M3-N and V3U SoCs,
- Add Ethernet support for the RZ/T2H and RZ/N2H SoCs and their
evaluation boards,
- Add ADC support for the RZ/N1D SoC,
- Add thermal, NMI pushbutton, and RTC support for the RZ/V2H SoC and
the RZ/V2H EVK development board,
- Add USB2.0 support for the RZ/G3S SoC and the RZ/G3S SMARC Carrier
II board.
Arnd Bergmann [Fri, 21 Nov 2025 15:39:35 +0000 (16:39 +0100)]
Merge tag 'mtk-dts64-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 Device Tree updates
This adds support for new boards and variants based on different
already supported MediaTek SoCs, and improves support for current
boards.
In particular:
- New machines:
- MT7988 BananaPi R4 Pro eMMC and SD router board with support
for both Key-M and Key-E M.2 slots through DTB Overlays
- MT8370 Grinn GenioSBC-510 (GenioSOM-510 + GenioBoard Edge AI)
- MT8390 Grinn GenioSBC-700 (GenioSOM-700 + GenioBoard Edge AI)
- New variant: MT8395 MediaTek Genio 1200 EVK with UFS
...preparation for new SoCs (MT8196 Kompanio Ultra, a clone of the
MT6991 Dimensity 9400, and MT6878 Dimensity 7300) with the
addition of GCE/PIO definitions
...improvements for already supported SoCs and machines:
- MT7622/7981b/7986a/7988a gain support for reading SoC UUID from
eFuse, used to generate a persistent MAC address on boards that
don't have any factory-assigned addresses.
- MT7986 BananaPi R3 gets changes to its default fan PWM speed to
improve compatibility with cheaper fans (usually coming with the
heatsink+fan combos)
- The MT7981b OpenWRT One router sees general support improvements
with the enablement of its UART-0 console and correct pinmuxing
for the same, addition of reserved memory for Trusted Firmware A,
its SPI NOR Flash (for recovery system, WiFi eeprom data and ETH
MAC address from factory), and board LEDs.
- MT8365 gets support for its Mali G52 MC1 GPU, which gets enabled
in the MediaTek Genio 350 EVK board
...and a dt-bindings warning fix for MT8183 machines through trivial
changes to rename the audiosys and afe nodes to reflect bindings.
* tag 'mtk-dts64-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (27 commits)
arm64: dts: mediatek: mt7981b-openwrt-one: Enable software leds
arm64: dts: mediatek: mt7981b-openwrt-one: Enable SPI NOR
arm64: dts: mediatek: mt7988a-bpi-r4pro: Add mmc overlays
arm64: dts: mediatek: mt7988a-bpi-r4-pro: Add PCIe overlays
arm64: dts: mediatek: mt7988: Add devicetree for BananaPi R4 Pro
arm64: dts: mediatek: mt7988: Disable 2.5G phy and enable at board layer
dt-bindings: arm: mediatek: add BPI-R4 Pro board
arm64: dts: mediatek: Add GCE header for MT8196
arm64: dts: mediatek: mt7981b: Add reserved memory for TF-A
arm64: dts: mediatek: mt7981b: Configure UART0 pinmux
arm64: dts: mediatek: mt8365-evk: Enable GPU support
arm64: dts: mediatek: mt8365: Add GPU support
arm64: dts: mediatek: mt8395-genio-1200-evk: Describe CPU supplies
arm64: dts: mediatek: Add MT6878 pinmux macro header file
arm64: dts: mediatek: mt7986-bpi-r3: Change fan PWM value for mid speed
arm64: dts: mediatek: mt8370-grinn-genio-510-sbc: Add Grinn GenioSBC-510
arm64: dts: mediatek: mt8390-genio-700-evk: Add Grinn GenioSBC-700
arm64: dts: mediatek: mt7988a: add 'soc-uuid' cell to efuse
arm64: dts: mediatek: mt7981b: add 'soc-uuid' cell to efuse
arm64: dts: mediatek: mt7986a: add 'soc-uuid' cell to efuse
...
Arnd Bergmann [Fri, 21 Nov 2025 15:38:23 +0000 (16:38 +0100)]
Merge tag 'mtk-dts32-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM32 Device Tree updates
This performs a cleanup of the MT6582 devicetrees and adds support
for secondary cores bringup on this SoC.
This also introduces basic support for a new machine, the MT6582
Alcatel "yarisxl" Pop C7 (OT-7041D) smartphone, with support for
booting into a initramfs with UART console output.
* tag 'mtk-dts32-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
ARM: dts: mediatek: drop wrong syscon hifsys compatible for MT2701/7623
ARM: dts: mediatek: add basic support for Alcatel yarisxl board
dt-bindings: arm: mediatek: Add MT6582 yarisxl
ARM: dts: mediatek: mt6582: add enable-method property to cpus
ARM: dts: mediatek: mt6582: add clock-names property to uart nodes
ARM: dts: mediatek: mt6582: add mt6582 compatible to timer
ARM: dts: mediatek: mt6582: remove compatible property from root node
ARM: dts: mediatek: mt6582: sort nodes and properties
ARM: dts: mediatek: mt6582: move MMIO devices under soc node
Arnd Bergmann [Fri, 21 Nov 2025 15:36:49 +0000 (16:36 +0100)]
Merge tag 'samsung-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.19
1. ExynosAutov920:
- Add more clock controller nodes.
2. Google GS101:
- PMIC clock
- Mark ACPM (Alive Clock and Power Manager) firmware node as clock
provider and use its clocks. Add also Devicetree binding headers
with clock its clock indices used in DTS (kept as separate branch).
- Add more SYSREG (syscon) regions.
- Correct several blocks address space sizes and APM SYSREG's starting
address.
3. Exynos7870:
- Enable display over DSI and several display planels.
- Few cleanups.
* tag 'samsung-dt64-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos7870-j6lte: enable display panel support
arm64: dts: exynos7870-a2corelte: enable display panel support
arm64: dts: exynos7870-on7xelte: enable display panel support
arm64: dts: exynos7870: add DSI support
arm64: dts: exynos: gs101: fix sysreg_apm reg property
arm64: dts: exynos: gs101: fix clock module unit reg sizes
arm64: dts: exynos: gs101: add sysreg_misc and sysreg_hsi0 nodes
arm64: dts: exynos: gs101: add OPPs
arm64: dts: exynos: gs101: add CPU clocks
arm64: dts: exynos: gs101: add #clock-cells to the ACPM protocol node
dt-bindings: firmware: google,gs101-acpm-ipc: add ACPM clocks
arm64: dts: exynos: gs101-pixel-common: add node for s2mpg10 / clock
arm64: dts: exynos990: Add sysreg nodes for PERIC0 and PERIC1
arm64: dts: exynosautov920: add CMU_MFC clock DT nodes
arm64: dts: exynosautov920: add CMU_M2M clock DT nodes
arm64: dts: exynos7870-on7xelte: add bus-width to mmc0 node
arm64: dts: exynos7870-j6lte: add bus-width to mmc0 node
arm64: dts: exynos7870-a2corelte: add bus-width to mmc0 node
Arnd Bergmann [Fri, 21 Nov 2025 15:35:57 +0000 (16:35 +0100)]
Merge tag 'thead-dt-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux into soc/dt
T-HEAD Devicetrees for v6.19
Add PWM controlled fan and it's associated thermal management for the
Lichee Pi 4A board.
Enable additional ISA extenstions supported by the T-Head C910 cores:
Zfh, Ziccrse, XTheadvector.
Add reset controllers of more TH1520 subsystems: AP, AO, DSP, MISC, VI.
Signed-off-by: Drew Fustini <fustini@kernel.org>
* tag 'thead-dt-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux:
riscv: dts: thead: Add reset controllers of more subsystems for TH1520
riscv: dts: thead: Add PWM fan and thermal control
riscv: dts: thead: Add PWM controller node
riscv: dts: thead: add zfh for th1520
riscv: dts: thead: add ziccrse for th1520
riscv: dts: thead: add xtheadvector to the th1520 devicetree
Arnd Bergmann [Fri, 21 Nov 2025 15:30:47 +0000 (16:30 +0100)]
Merge tag 'renesas-dts-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.19
- Add thermal support for the RZ/G3S and RZ/G3E SoCs,
- Add DT overlay support for the Raspberry Pi Display 2 and Argon40
fan hats on the Retronix Sparrow Hawk board,
- Add eMMC support for the Eagle Function expansion board,
- Add initial support for the R-Car X5H (R8A78000) SoC and the
Ironhide development board,
- Move interrupt-parent properties to root nodes,
- Add system watchdog timer support for R-Car Gen3 and Gen4 SoCs,
which is reserved for secure firmware on R-Car Gen3 boards,
- Add ADC support for the RZ/T2H and RZ/N2H SoCs and their evaluation
boards,
- Add watchdog timer support on the R-Car V3M Starter Kit board,
- Add Cortex-A55 PMU support on the RZ/V2H, RZ/V2N, RZ/T2H, and RZ/N2H
SoCs,
- Add Imagination Technologies PowerVR Series 6XT GX6250 GPU support
on the R-Car M3-W and M3-W+ SoCs,
- Miscellaneous fixes and improvements.
Arnd Bergmann [Fri, 21 Nov 2025 15:28:42 +0000 (16:28 +0100)]
Merge tag 'aspeed-6.19-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
First batch of ASPEED Arm devicetree changes for 6.19
Significant changes:
- The IBM Power11 FSI DTSIs have been rearranged to accommodate new systems
New platforms:
- IBM Balcones
The Balcones system is similar to Bonnell but with a POWER11 processor.
Like POWER10, the POWER11 is a dual-chip module, so a dual chip FSI
tree is needed.
- Meta Yosemite5
The Yosemite5 platform provides monitoring of voltages, power,
temperatures, and other critical parameters across the motherboard,
CXL board, E1.S expansion board, and NIC components.
Updated platforms:
- clemente (Meta): LEDs, shunt resistor configuration
- santabarbara (Meta): AMD APML, EEPROMs, LEDs, GPIO line names, MCTP for NICs
There are a scattering of one-off changes and devicetree cleanups for other
platforms as well.
* tag 'aspeed-6.19-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: santabarbara: Add eeprom device node for PRoT module
ARM: dts: aspeed: santabarbara: Add AMD APML interface support
ARM: dts: aspeed: santabarbara: Add gpio line name
ARM: dts: aspeed: santabarbara: Add bmc_ready_noled Led
ARM: dts: aspeed: santabarbara: Enable MCTP for frontend NIC
ARM: dts: aspeed: santabarbara: Add sensor support for extension boards
ARM: dts: aspeed: santabarbara: Add blank lines between nodes for readability
ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC
dt-bindings: arm: aspeed: add Meta Yosemite5 board
ARM: dts: aspeed: clemente: Add HDD LED GPIO
ARM: dts: aspeed: Fix max31785 fan properties
ARM: dts: aspeed: Add Balcones system
dt-bindings: arm: aspeed: add IBM Bonnell board
dt-bindings: arm: aspeed: add IBM Balcones board
ARM: dts: aspeed: harma: Add MCTP I2C controller node
ARM: dts: aspeed: yosemite4: allocate ramoops for kernel panic
ARM: dts: aspeed: clemente: add shunt-resistor-micro-ohms for LM5066i
Arnd Bergmann [Fri, 21 Nov 2025 15:26:17 +0000 (16:26 +0100)]
Merge tag 'pxa1908-dt-for-6.19' of https://gitlab.com/pxa1908-mainline/linux into soc/dt
PXA1908 DT changes for 6.19
Rollup of hardware support which has accumulated since support for the
SoC and coreprimevelte board was merged. This most notably includes
eMMC, PMIC, backlight and touchscreen. A few QoL fixes are also
included.
* tag 'pxa1908-dt-for-6.19' of https://gitlab.com/pxa1908-mainline/linux:
arm64: dts: marvell: pxa1908: Add power domains
arm64: dts: marvell: samsung,coreprimevelte: Add USB connector
arm64: dts: marvell: samsung,coreprimevelte: Fill in memory node
arm64: dts: marvell: samsung,coreprimevelte: Drop some reserved memory
arm64: dts: marvell: pxa1908: Move ramoops to SoC dtsi
arm64: dts: marvell: samsung,coreprimevelte: Add vibrator
arm64: dts: marvell: pxa1908: Add PWMs
arm64: dts: marvell: samsung,coreprimevelte: Enable eMMC
arm64: dts: marvell: samsung,coreprimevelte: Correct CD GPIO
arm64: dts: marvell: samsung,coreprimevelte: Add backlight
arm64: dts: samsung,coreprimevelte: add SDIO
arm64: dts: samsung,coreprimevelte: add touchscreen
arm64: dts: samsung,coreprimevelte: add PMIC
Max Krummenacher [Tue, 11 Nov 2025 15:16:14 +0000 (16:16 +0100)]
arm64: dts: freescale: add Toradex SMARC iMX95
Add DT support for Toradex SMARC iMX95 SoM and Development carrier
board.
The module consists of an NXP i.MX95 family SoC, up to 16GB of LPDDR5
RAM and up to 128GB of storage, a USB 3.0 Host Hub and 2.0 OTG, two
Gigabit Ethernet PHYs, a 10 Gigabit Ethernet interface, an I2C EEPROM
and Temperature Sensor, an RX8130 RTC, a Quad/Dual lane CSI interface,
and some optional addons: TPM 2.0, DSI, LVDS, DisplayPort (through a
DSI-DP bridge), and Wi-Fi/BT module.
Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95 Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Co-developed-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Co-developed-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Co-developed-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com> Co-developed-by: Vitor Soares <vitor.soares@toradex.com> Signed-off-by: Vitor Soares <vitor.soares@toradex.com> Co-developed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arm64: dts: imx8mp: make 'dsp' node depend on 'aips5'
The DSP needs to access peripherals on AIPSTZ5 (to communicate with
the AP using AUDIOMIX MU, for instance). To do so, the security-related
registers of the bridge have to be configured before the DSP is started.
Enforce a dependency on AIPSTZ5 by adding the 'access-controllers'
property to the 'dsp' node.
Change the programming model of the "aips5" node to allow configuring
the security-related registers exposed by the AIPSTZ5 bridge. Without
this, masters such as the HIFI4 DSP will have their access to the
peripherals connected to the bridge denied after power cycling the
AUDIOMIX domain.
Co-developed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marco Felsch [Fri, 7 Nov 2025 14:49:52 +0000 (15:49 +0100)]
arm64: dts: imx8mp-skov: add Rev.C HDMI support
From software perspective, Rev.C HDMI and Rev.B HDMI don't differ since
the panel is connected via HDMI and the touchscreen is connected via
USB. However, the bootloader firmware expects to find a dts with the
correct revc-hdmi compatible.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marek Vasut [Tue, 4 Nov 2025 01:50:13 +0000 (02:50 +0100)]
arm64: dts: imx8mp: Add missing LED enumerators for DH electronics i.MX8M Plus DHCOM on PDK2
The LED enumerators are missing, which prevents the LEDs from being
accurately told apart by label. Fill in the enumerators the same way
they are already present on PDK3.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make SoM .dtsi SoC-agnostic by moving SoC include to board level
imx6qdl-var-som.dtsi currently includes imx6q.dtsi, which makes this SoM
description Quad/Dual specific and prevents reuse from i.MX6DL boards.
Changes:
- Move imx6q.dtsi include from imx6qdl-var-som.dtsi to
imx6q-var-mx6customboard.dts.
- Remove /dts-v1/; from imx6qdl-var-som.dtsi (dtsi files should not declare
version)
This keeps the SoM .dtsi SoC-agnostic (it already relies on imx6qdl.dtsi for
family-common parts) and allows boards using the DualLite or Solo to include
imx6dl.dtsi instead.
Why this is needed:
To reuse imx6qdl-var-som.dtsi on i.MX6DL board.
No functional changes for imx6q-var-mx6customboard are intended.
Michal Vokáč [Thu, 6 Nov 2025 08:54:29 +0000 (09:54 +0100)]
ARM: dts: imx6dl-yapp4: Model the RGB LED as a single multi-led part
Describe the RGB LED indicator according to the reality - it is a single
part containing all the three R,G and B LEDs in one package.
With this description the chan-name property becomes useless, remove it.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stefano Radaelli [Thu, 30 Oct 2025 12:01:24 +0000 (13:01 +0100)]
arm64: dts: freescale: imx93-var-som: Add support for ADS7846 touchscreen
The VAR-SOM-MX93 integrates an ADS7846 resistive touchscreen controller.
The controller is physically located on the SOM, and its signals are
routed to the SOM pins, allowing carrier boards to make use of it.
This patch adds the ADS7846 node and the appropriate SPI controller.
Stefano Radaelli [Thu, 30 Oct 2025 12:01:23 +0000 (13:01 +0100)]
arm64: dts: freescale: imx93-var-som: Add support for WM8904 audio codec
The VAR-SOM-MX93 can integrate the WM8904, a high-performance
ultra-low-power stereo codec optimized for portable audio applications.
This patch adds the WM8904 device to the appropriate I2C bus, enables
the SAI peripheral, and introduces the sound node to expose the
sound card to the system.
Stefano Radaelli [Thu, 30 Oct 2025 12:01:22 +0000 (13:01 +0100)]
arm64: dts: freescale: imx93-var-som: Add PMIC support
The VAR-SOM-MX93 features Dual Freescale/NXP PCA9541 chip as a Power
Management Integrated circuit (PMIC).
The PMIC is programmable via the I2C interface and its associated
register map, and this patch adds its support.
Stefano Radaelli [Thu, 30 Oct 2025 12:01:21 +0000 (13:01 +0100)]
arm64: dts: freescale: imx93-var-som: Add WiFi and Bluetooth support
Add device tree nodes for the WiFi and Bluetooth module mounted on the
VAR-SOM-MX93. The module can be based on either the NXP IW612 or IW611
chipset, depending on the configuration chosen by the customer.
Regardless of the chipset used, WiFi communicates over SDIO and Bluetooth
over UART.
Add overlay to support PWM fan on the phyBOARD-Nash-i.MX93 board. Fan
can be connected to the FAN (X48) connector on the board and will be
controlled according to the following CPU temperature trips table:
- bellow 50 degrees - fan is off (<1% duty cycle)
- between 50 and 58 degrees - low fan speed (~35% duty cycle)
- between 58 and 65 degrees - fan medium speed (~60% duty cycle)
- above 65 degrees - fan at full speed (>99% duty cycle)
The output frequency of PWM signal is set to 25 kHz.
The PEB-AV-10 board can be used with different displays or in audio-only
mode.
Split the device tree overlays to reflect these use cases. To use the
board with the EDT ETML1010G3DRA display, the overlay
imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtbo must now be used
instead of imx8mm-phyboard-polis-peb-av-10.dtbo.
Signed-off-by: Jan Remmet <j.remmet@phytec.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shengjiu Wang [Tue, 23 Sep 2025 05:30:01 +0000 (13:30 +0800)]
arm64: dts: imx8mp-evk: enable hdmi_pai device
Enable hdmi_pai device.
Aud2htx module, hdmi_pai and hdmi controller compose the hdmi audio
pipeline.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The HDMI TX Parallel Audio Interface (HTX_PAI) is a bridge between the
Audio Subsystem to the HDMI TX Controller.
Shrink register map size of hdmi_pvi to avoid overlapped hdmi_pai device.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
projects / thirdparty / linux.git / log
