Variable allocated by kvmalloc should not be freed by kfree.
Because it may be allocated by vmalloc.
So replace kfree with kvfree here.
Fixes: 9b1f298236057 ("net/mlx5: Add support for FW fatal reporter dump") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When a route needs to be appended to an existing multipath route,
fib6_add_rt2node() first appends it to the siblings list and increments
the number of sibling routes on each sibling.
Later, the function notifies the route via call_fib6_entry_notifiers().
In case the notification is vetoed, the route is not unlinked from the
siblings list, which can result in a use-after-free.
Fix this by unlinking the route from the siblings list before returning
an error.
Audited the rest of the call sites from which the FIB notification chain
is called and could not find more problems.
Fixes: 2233000cba40 ("net/ipv6: Move call_fib6_entry_notifiers up for route adds") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: bcmgenet: use promisc for unsupported filters
Currently we silently ignore filters if we cannot meet the filter
requirements. This will lead to the MAC dropping packets that are
expected to pass. A better solution would be to set the NIC to promisc
mode when the required filters cannot be met.
Also correct the number of MDF filters supported. It should be 17,
not 16.
Signed-off-by: Justin Chen <justinpopo6@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Wed, 17 Jul 2019 22:08:43 +0000 (15:08 -0700)]
ipv6: rt6_check should return NULL if 'from' is NULL
Paul reported that l2tp sessions were broken after the commit referenced
in the Fixes tag. Prior to this commit rt6_check returned NULL if the
rt6_info 'from' was NULL - ie., the dst_entry was disconnected from a FIB
entry. Restore that behavior.
Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: Paul Donohue <linux-kernel@PaulSD.com> Tested-by: Paul Donohue <linux-kernel@PaulSD.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Wed, 17 Jul 2019 21:43:44 +0000 (23:43 +0200)]
tipc: initialize 'validated' field of received packets
The tipc_msg_validate() function leaves a boolean flag 'validated' in
the validated buffer's control block, to avoid performing this action
more than once. However, at reception of new packets, the position of
this field may already have been set by lower layer protocols, so
that the packet is erroneously perceived as already validated by TIPC.
We fix this by initializing the said field to 'false' before performing
the initial validation.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
ipv4: relax source validation check for loopback packets
This patchset fixes a corner case when loopback packets get dropped
by rp_filter when we route them from veth to lo. Patch 1 is the fix
and patch 2 provides a simplified test case for this scenario.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Wed, 17 Jul 2019 21:41:59 +0000 (14:41 -0700)]
selftests: add a test case for rp_filter
Add a test case to simulate the loopback packet case fixed
in the previous patch.
This test gets passed after the fix:
IPv4 rp_filter tests
TEST: rp_filter passes local packets [ OK ]
TEST: rp_filter passes loopback packets [ OK ]
Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Wed, 17 Jul 2019 21:41:58 +0000 (14:41 -0700)]
fib: relax source validation check for loopback packets
In a rare case where we redirect local packets from veth to lo,
these packets fail to pass the source validation when rp_filter
is turned on, as the tracing shows:
So, the fib table lookup returns eth0 as the nexthop even though
the packets are local and should be routed to loopback nonetheless,
but they can't pass the dev match check in fib_info_nh_uses_dev()
without this patch.
It should be safe to relax this check for this special case, as
normally packets coming out of loopback device still have skb_dst
so they won't even hit this slow path.
Cc: Julian Anastasov <ja@ssi.bg> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 17 Jul 2019 22:19:46 +0000 (15:19 -0700)]
Merge branch 'mlxsw-Two-fixes'
Ido Schimmel says:
====================
mlxsw: Two fixes
This patchset contains two fixes for mlxsw.
Patch #1 from Petr fixes an issue in which DSCP rewrite can occur even
if the egress port was switched to Trust L2 mode where priority mapping
is based on PCP.
Patch #2 fixes a problem where packets can be learned on a non-existing
FID if a tc filter with a redirect action is configured on a bridged
port. The problem and fix are explained in detail in the commit message.
Please consider both patches for 5.2.y
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw: spectrum: Do not process learned records with a dummy FID
The switch periodically sends notifications about learned FDB entries.
Among other things, the notification includes the FID (Filtering
Identifier) and the port on which the MAC was learned.
In case the driver does not have the FID defined on the relevant port,
the following error will be periodically generated:
mlxsw_spectrum2 0000:06:00.0 swp32: Failed to find a matching {Port, VID} following FDB notification
This is not supposed to happen under normal conditions, but can happen
if an ingress tc filter with a redirect action is installed on a bridged
port. The redirect action will cause the packet's FID to be changed to
the dummy FID and a learning notification will be emitted with this FID
- which is not defined on the bridged port.
Fix this by having the driver ignore learning notifications generated
with the dummy FID and delete them from the device.
Another option is to chain an ignore action after the redirect action
which will cause the device to disable learning, but this means that we
need to consume another action whenever a redirect action is used. In
addition, the scenario described above is merely a corner case.
Fixes: cedbb8b25948 ("mlxsw: spectrum_flower: Set dummy FID before forward action") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Wed, 17 Jul 2019 20:29:07 +0000 (23:29 +0300)]
mlxsw: spectrum_dcb: Configure DSCP map as the last rule is removed
Spectrum systems use DSCP rewrite map to update DSCP field in egressing
packets to correspond to priority that the packet has. Whether rewriting
will take place is determined at the point when the packet ingresses the
switch: if the port is in Trust L3 mode, packet priority is determined from
the DSCP map at the port, and DSCP rewrite will happen. If the port is in
Trust L2 mode, 802.1p is used for packet prioritization, and no DSCP
rewrite will happen.
The driver determines the port trust mode based on whether any DSCP
prioritization rules are in effect at given port. If there are any, trust
level is L3, otherwise it's L2. When the last DSCP rule is removed, the
port is switched to trust L2. Under that scenario, if DSCP of a packet
should be rewritten, it should be rewritten to 0.
However, when switching to Trust L2, the driver neglects to also update the
DSCP rewrite map. The last DSCP rule thus remains in effect, and packets
egressing through this port, if they have the right priority, will have
their DSCP set according to this rule.
Fix by first configuring the rewrite map, and only then switching to trust
L2 and bailing out.
Fixes: b2b1dab6884e ("mlxsw: spectrum: Support ieee_setapp, ieee_delapp") Signed-off-by: Petr Machata <petrm@mellanox.com> Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Tue, 16 Jul 2019 20:57:30 +0000 (13:57 -0700)]
net_sched: unset TCQ_F_CAN_BYPASS when adding filters
For qdisc's that support TC filters and set TCQ_F_CAN_BYPASS,
notably fq_codel, it makes no sense to let packets bypass the TC
filters we setup in any scenario, otherwise our packets steering
policy could not be enforced.
This can be reproduced easily with the following script:
ip li add dev dummy0 type dummy
ifconfig dummy0 up
tc qd add dev dummy0 root fq_codel
tc filter add dev dummy0 parent 8001: protocol arp basic action mirred egress redirect dev lo
tc filter add dev dummy0 parent 8001: protocol ip basic action mirred egress redirect dev lo
ping -I dummy0 192.168.112.1
Without this patch, packets are sent directly to dummy0 without
hitting any of the filters. With this patch, packets are redirected
to loopback as expected.
This fix is not perfect, it only unsets the flag but does not set it back
because we have to save the information somewhere in the qdisc if we
really want that. Note, both fq_codel and sfq clear this flag in their
->bind_tcf() but this is clearly not sufficient when we don't use any
class ID.
Fixes: 23624935e0c4 ("net_sched: TCQ_F_CAN_BYPASS generalization") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/rds: Initialize ic->i_fastreg_wrs upon allocation
Otherwise, if an IB connection is torn down before "rds_ib_setup_qp"
is called, the value of "ic->i_fastreg_wrs" is still at zero
(as it wasn't initialized by "rds_ib_setup_qp").
Consequently "rds_ib_conn_path_shutdown" will spin forever,
waiting for it to go back to "RDS_IB_DEFAULT_FR_WR",
which of course will never happen as there are no
outstanding work requests.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/rds: Keep track of and wait for FRWR segments in use upon shutdown
Since "rds_ib_free_frmr" and "rds_ib_free_frmr_list" simply put
the FRMR memory segments on the "drop_list" or "free_list",
and it is the job of "rds_ib_flush_mr_pool" to reap those entries
by ultimately issuing a "IB_WR_LOCAL_INV" work-request,
we need to trigger and then wait for all those memory segments
attached to a particular connection to be fully released before
we can move on to release the QP, CQ, etc.
So we make "rds_ib_conn_path_shutdown" wait for one more
atomic_t called "i_fastreg_inuse_count" that keeps track of how
many FRWR memory segments are out there marked "FRMR_IS_INUSE"
(and also wake_up rds_ib_ring_empty_wait, as they go away).
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/rds: Set fr_state only to FRMR_IS_FREE if IB_WR_LOCAL_INV had been successful
Fix a bug where fr_state first goes to FRMR_IS_STALE, because of a failure
of operation IB_WR_LOCAL_INV, but then gets set back to "FRMR_IS_FREE"
uncoditionally, even though the operation failed.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Make function "rds_ib_try_reuse_ibmr" return NULL in case
memory region could not be allocated, since callers
simply check if the return value is not NULL.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/rds: Wait for the FRMR_IS_FREE (or FRMR_IS_STALE) transition after posting IB_WR_LOCAL_INV
In order to:
1) avoid a silly bouncing between "clean_list" and "drop_list"
triggered by function "rds_ib_reg_frmr" as it is releases frmr
regions whose state is not "FRMR_IS_FREE" right away.
2) prevent an invalid access error in a race from a pending
"IB_WR_LOCAL_INV" operation with a teardown ("dma_unmap_sg", "put_page")
and de-registration ("ib_dereg_mr") of the corresponding
memory region.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/rds: Get rid of "wait_clean_list_grace" and add locking
Waiting for activity on the "clean_list" to quiesce is no substitute
for proper locking.
We can have multiple threads competing for "llist_del_first"
via "rds_ib_reuse_mr", and a single thread competing
for "llist_del_all" and "llist_del_first" via "rds_ib_flush_mr_pool".
Since "llist_del_first" depends on "list->first->next" not to change
in the midst of the operation, simply waiting for all current calls
to "rds_ib_reuse_mr" to quiesce across all CPUs is woefully inadequate:
By the time "wait_clean_list_grace" is done iterating over all CPUs to see
that there is no concurrent caller to "rds_ib_reuse_mr", a new caller may
have just shown up on the first CPU.
Furthermore, <linux/llist.h> explicitly calls out the need for locking:
* Cases where locking is needed:
* If we have multiple consumers with llist_del_first used in one consumer,
* and llist_del_first or llist_del_all used in other consumers,
* then a lock is needed.
Also, while at it, drop the unused "pool" parameter
from "list_to_llist_nodes".
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/rds: Give fr_state a chance to transition to FRMR_IS_FREE
In the context of FRMR (ib_frmr.c):
Memory regions make it onto the "clean_list" via "rds_ib_flush_mr_pool",
after the memory region has been posted for invalidation via
"rds_ib_post_inv".
At that point in time, "fr_state" may still be in state "FRMR_IS_INUSE",
since the only place where "fr_state" transitions to "FRMR_IS_FREE"
is in "rds_ib_mr_cqe_handler", which is triggered by a tasklet.
So in case we notice that "fr_state != FRMR_IS_FREE" (see below),
we wait for "fr_inv_done" to trigger with a maximum of 10msec.
Then we check again, and only put the memory region onto the drop_list
(via "rds_ib_free_frmr") in case the situation remains unchanged.
This avoids the problem of memory-regions bouncing between "clean_list"
and "drop_list" before they even have a chance to be properly invalidated.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/sched/act_ct.o: In function `tcf_ct_act':
act_ct.c:(.text+0x21ac): undefined reference to `nf_ct_nat_ext_add'
act_ct.c:(.text+0x229a): undefined reference to `nf_nat_icmp_reply_translation'
act_ct.c:(.text+0x233a): undefined reference to `nf_nat_setup_info'
act_ct.c:(.text+0x234a): undefined reference to `nf_nat_alloc_null_binding'
act_ct.c:(.text+0x237c): undefined reference to `nf_nat_packet'
Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: sctp: fix warning "NULL check before some freeing functions is not needed"
This patch removes NULL checks before calling kfree.
fixes below issues reported by coccicheck
net/sctp/sm_make_chunk.c:2586:3-8: WARNING: NULL check before some
freeing functions is not needed.
net/sctp/sm_make_chunk.c:2652:3-8: WARNING: NULL check before some
freeing functions is not needed.
net/sctp/sm_make_chunk.c:2667:3-8: WARNING: NULL check before some
freeing functions is not needed.
net/sctp/sm_make_chunk.c:2684:3-8: WARNING: NULL check before some
freeing functions is not needed.
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
selftests/bpf: structure test_{progs, maps, verifier} test runners uniformly
It's easier to follow the logic if it's structured the same.
There is just slight difference between test_progs/test_maps and
test_verifier. test_verifier's verifier/*.c files are not really compilable
C files (they are more of include headers), so they can't be specified as
explicit dependencies of test_verifier.
selftests/bpf: fix test_verifier/test_maps make dependencies
e46fc22e60a4 ("selftests/bpf: make directory prerequisites order-only")
exposed existing problem in Makefile for test_verifier and test_maps tests:
their dependency on auto-generated header file with a list of all tests wasn't
recorded explicitly. This patch fixes these issues.
Fixes: 51a0e301a563 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps") Fixes: 6b7b6995c43e ("selftests: bpf: tests.h should depend on .c files, not the output") Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Stanislav Fomichev <sdf@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
fix: taprio: Change type of txtime-delay parameter to u32
During the review of the iproute2 patches for txtime-assist mode, it was
pointed out that it does not make sense for the txtime-delay parameter to
be negative. So, change the type of the parameter from s32 to u32.
Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Qian Cai [Tue, 16 Jul 2019 15:43:05 +0000 (11:43 -0400)]
skbuff: fix compilation warnings in skb_dump()
The commit 6413139dfc64 ("skbuff: increase verbosity when dumping skb
data") introduced a few compilation warnings.
net/core/skbuff.c:766:32: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
level, sk->sk_family, sk->sk_type,
sk->sk_protocol);
^~~~~~~~~~~
net/core/skbuff.c:766:45: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
level, sk->sk_family, sk->sk_type,
sk->sk_protocol);
^~~~~~~~~~~~~~~
Fix them by using the proper types.
Fixes: 6413139dfc64 ("skbuff: increase verbosity when dumping skb data") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Poirier [Tue, 16 Jul 2019 08:16:55 +0000 (17:16 +0900)]
be2net: Signal that the device cannot transmit during reconfiguration
While changing the number of interrupt channels, be2net stops adapter
operation (including netif_tx_disable()) but it doesn't signal that it
cannot transmit. This may lead dev_watchdog() to falsely trigger during
that time.
Add the missing call to netif_carrier_off(), following the pattern used in
many other drivers. netif_carrier_on() is already taken care of in
be_open().
Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: mediatek: mtk_eth_soc: Add of_node_put() before goto
Each iteration of for_each_child_of_node puts the previous node, but in
the case of a goto from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the goto.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: mscc: ocelot_board: Add of_node_put() before return
Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a return from the middle of the loop, there is
no put, thus causing a memory leak. Hence add an of_node_put before the
return in two places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ethernet: ti: cpsw: Add of_node_put() before return and break
Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a return or break from the middle of the loop,
there is no put, thus causing a memory leak.
Hence, for function cpsw_probe_dt, create an extra label err_node_put
that puts the last used node and returns ret; modify the return
statements in the loop to save the return value in ret and goto this new
label.
For function cpsw_remove_dt, add an of_node_put before the break.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
selftests/bpf: fix "alu with different scalars 1" on s390
BPF_LDX_MEM is used to load the least significant byte of the retrieved
test_val.index, however, on big-endian machines it ends up retrieving
the most significant byte.
Change the test to load the whole int in order to make it
endianness-independent.
selftests/bpf: remove logic duplication in test_verifier
test_verifier tests can specify single- and multi-runs tests. Internally
logic of handling them is duplicated. Get rid of it by making single run
retval/data specification to be a first run spec.
Daniel Borkmann [Mon, 15 Jul 2019 21:15:53 +0000 (23:15 +0200)]
Merge branch 'bpf-fix-wide-loads-sockaddr'
Stanislav Fomichev says:
====================
When fixing selftests by adding support for wide stores, Yonghong
reported that he had seen some examples where clang generates
single u64 loads for two adjacent u32s as well:
Add a rule to put test_stub.o in $(OUTPUT) and change the references to
it accordingly. This prevents test_stub.o from being created in the
source directory.
selftests/bpf: make directory prerequisites order-only
When directories are used as prerequisites in Makefiles, they can cause
a lot of unnecessary rebuilds, because a directory is considered changed
whenever a file in this directory is added, removed or modified.
If the only thing a target is interested in is the existence of the
directory it depends on, which is the case for selftests/bpf, this
directory should be specified as an order-only prerequisite: it would
still be created in case it does not exist, but it would not trigger a
rebuild of a target in case it's considered changed.
attach_probe test fails, because it cannot install a kprobe on a
non-existent sys_nanosleep symbol.
Use the correct symbol name for the nanosleep syscall on 64-bit s390.
Don't bother adding one for 31-bit mode, since tests are compiled only
in 64-bit mode.
Daniel Borkmann [Mon, 15 Jul 2019 21:02:17 +0000 (23:02 +0200)]
Merge branch 'bpf-btf-size-verification-fix'
Andrii Nakryiko says:
====================
BTF size resolution logic isn't always resolving type size correctly, leading
to erroneous map creation failures due to value size mismatch.
This patch set:
1. fixes the issue (patch #1);
2. adds tests for trickier cases (patch #2);
3. and converts few test cases utilizing BTF-defined maps, that previously
couldn't use typedef'ed arrays due to kernel bug (patch #3).
====================
Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
BTF verifier has a size resolution bug which in some circumstances leads to
invalid size resolution for, e.g., TYPEDEF modifier. This happens if we have
[1] PTR -> [2] TYPEDEF -> [3] ARRAY, in which case due to being in pointer
context ARRAY size won't be resolved (because for pointer it doesn't matter, so
it's a sink in pointer context), but it will be permanently remembered as zero
for TYPEDEF and TYPEDEF will be marked as RESOLVED. Eventually ARRAY size will
be resolved correctly, but TYPEDEF resolved_size won't be updated anymore.
This, subsequently, will lead to erroneous map creation failure, if that
TYPEDEF is specified as either key or value, as key_size/value_size won't
correspond to resolved size of TYPEDEF (kernel will believe it's zero).
Note, that if BTF was ordered as [1] ARRAY <- [2] TYPEDEF <- [3] PTR, this
won't be a problem, as by the time we get to TYPEDEF, ARRAY's size is already
calculated and stored.
This bug manifests itself in rejecting BTF-defined maps that use array
typedef as a value type:
The fix consists on not relying on modifier's resolved_size and instead using
modifier's resolved_id (type ID for "concrete" type to which modifier
eventually resolves) and doing size determination for that resolved type. This
allow to preserve existing "early DFS termination" logic for PTR or
STRUCT_OR_ARRAY contexts, but still do correct size determination for modifier
types.
Fixes: eb3f595dab40 ("bpf: btf: Validate type reference") Cc: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Recently, fl_flow_key->indev_ifindex int field was refactored into
flow_dissector_key_meta field. With this, flower classifier also sets
FLOW_DISSECTOR_KEY_META flow dissector key. However, mlx5 flower dissector
validation code rejects filters that use flow dissector keys that are not
supported. Add FLOW_DISSECTOR_KEY_META to the list of allowed dissector
keys in __parse_cls_flower() to prevent following error when offloading
flower classifier to mlx5:
Error: mlx5_core: Unsupported key.
Fixes: 8212ed777f40 ("net: sched: cls_flower: use flow_dissector for ingress ifindex") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
net/mlx5e: Rely on filter_dev instead of dissector keys for tunnels
Currently, tunnel attributes are parsed and inner header matching is used
only when flow dissector specifies match on some of the supported
encapsulation fields. When user tries to offload tc filter that doesn't
match any encapsulation fields on tunnel device, mlx5 tc layer incorrectly
sets to match packet header keys on encap header (outer header) and
firmware rejects the rule with syndrome 0x7e1579 when creating new flow
group.
Change __parse_cls_flower() to determine whether tunnel is used based on
fitler_dev tunnel info, instead of determining it indirectly by checking
flow dissector enc keys.
Eli Cohen [Thu, 27 Jun 2019 05:34:41 +0000 (08:34 +0300)]
net/mlx5e: Verify encapsulation is supported
When mlx5e_attach_encap() calls mlx5e_get_tc_tun() to get the tunnel
info data struct, check that returned value is not NULL, as would be in
the case of unsupported encapsulation.
Fixes: d386939a327d2 ("net/mlx5e: Rearrange tc tunnel code in a modular way") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
vmxnet3: Remove call to memset after dma_alloc_coherent
In commit 518a2f1925c3
("dma-mapping: zero memory returned from dma_alloc_*"),
dma_alloc_coherent has already zeroed the memory.
So memset is not needed.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
hippi: Remove call to memset after pci_alloc_consistent
pci_alloc_consistent calls dma_alloc_coherent directly.
In commit 518a2f1925c3
("dma-mapping: zero memory returned from dma_alloc_*"),
dma_alloc_coherent has already zeroed the memory.
So memset is not needed.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
kvzalloc already zeroes the memory during the allocation.
pci_alloc_consistent calls dma_alloc_coherent directly.
In commit 518a2f1925c3
("dma-mapping: zero memory returned from dma_alloc_*"),
dma_alloc_coherent has already zeroed the memory.
So the memset after these function is not needed.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
atm: idt77252: Remove call to memset after dma_alloc_coherent
In commit 518a2f1925c3
("dma-mapping: zero memory returned from dma_alloc_*"),
dma_alloc_coherent has already zeroed the memory.
So memset is not needed.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi [Sun, 14 Jul 2019 21:36:11 +0000 (23:36 +0200)]
net: neigh: fix multiple neigh timer scheduling
Neigh timer can be scheduled multiple times from userspace adding
multiple neigh entries and forcing the neigh timer scheduling passing
NTF_USE in the netlink requests.
This will result in a refcount leak and in the following dump stack:
Fix the issue unscheduling neigh_timer if selected entry is in 'IN_TIMER'
receiving a netlink request with NTF_USE flag set
Reported-by: Marek Majkowski <marek@cloudflare.com> Fixes: 0c5c2d308906 ("neigh: Allow for user space users of the neighbour table") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit ed194d136769 ("usb: core: remove local_irq_save() around
->complete() handler") the handler rt2x00usb_interrupt_rxdone() is
not running with interrupts disabled anymore. So this completion handler
is not guaranteed to run completely before workqueue processing starts
for the same queue entry.
Be sure to set all other flags in the entry correctly before marking
this entry ready for workqueue processing. This way we cannot miss error
conditions that need to be signalled from the completion handler to the
worker thread.
Note that rt2x00usb_work_rxdone() processes all available entries, not
only such for which queue_work() was called.
This patch is similar to what commit df71c9cfceea ("rt2x00: fix order
of entry flags modification") did for TX processing.
This fixes a regression on a RT5370 based wifi stick in AP mode, which
suddenly stopped data transmission after some period of heavy load. Also
stopping the hanging hostapd resulted in the error message "ieee80211
phy0: rt2x00queue_flush_queue: Warning - Queue 14 failed to flush".
Other operation modes are probably affected as well, this just was
the used testcase.
Fixes: ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler") Cc: stable@vger.kernel.org # 4.20+ Signed-off-by: Soeren Moch <smoch@web.de> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
ath10k: work around uninitialized vht_pfr variable
As clang points out, the vht_pfr is assigned to a struct member
without being initialized in one case:
drivers/net/wireless/ath/ath10k/mac.c:7528:7: error: variable 'vht_pfr' is used uninitialized whenever 'if' condition
is false [-Werror,-Wsometimes-uninitialized]
if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath10k/mac.c:7551:20: note: uninitialized use occurs here
arvif->vht_pfr = vht_pfr;
^~~~~~~
drivers/net/wireless/ath/ath10k/mac.c:7528:3: note: remove the 'if' if its condition is always true
if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath10k/mac.c:7483:12: note: initialize the variable 'vht_pfr' to silence this warning
u8 vht_pfr;
Add an explicit but probably incorrect initialization here.
I suspect we want a better fix here, but chose this approach to
illustrate the issue.
Fixes: 8b97b055dc9d ("ath10k: fix failure to set multiple fixed rate") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Add support for C-step devices. Currently we don't have a nice way of
matching the step and choosing the proper configuration, so we need to
switch the config structs one by one.
Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The onboard sky2 NICs send IRQs after S3, resulting in ethernet not
working after resume.
Maskable MSI and MSI-X are also not supported, so fall back to INTx.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The function gve_probe is declared static and marked EXPORT_SYMBOL, which
is at best an odd combination. Because the function is not used outside of
the drivers/net/ethernet/google/gve/gve_main.c file it is defined in, this
commit removes the EXPORT_SYMBOL() marking.
Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Bernat [Sat, 13 Jul 2019 14:35:27 +0000 (16:35 +0200)]
bonding: add documentation for peer_notif_delay
Ability to tweak the interval between peer notifications has been
added in 07a4ddec3ce9 ("bonding: add an option to specify a delay
between peer notifications") but the documentation was not updated.
Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
r8169: fix issue with confused RX unit after PHY power-down on RTL8411b
On RTL8411b the RX unit gets confused if the PHY is powered-down.
This was reported in [0] and confirmed by Realtek. Realtek provided
a sequence to fix the RX unit after PHY wakeup.
The issue itself seems to have been there longer, the Fixes tag
refers to where the fix applies properly.
Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Tested-by: Ionut Radu <ionut.radu@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Removal of the NPU DMA code, used by the out-of-tree Nvidia driver,
as well as some other functions only used by drivers that haven't
(yet?) made it upstream.
- A fix for a bug in our handling of hardware watchpoints (eg. perf
record -e mem: ...) which could lead to register corruption and
kernel crashes.
- Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for
vmalloc when using the Radix MMU.
- A large but incremental rewrite of our exception handling code to
use gas macros rather than multiple levels of nested CPP macros.
And the usual small fixes, cleanups and improvements.
* tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits)
powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
powerpc/eeh: Handle hugepages in ioremap space
ocxl: Update for AFU descriptor template version 1.1
powerpc/boot: pass CONFIG options in a simpler and more robust way
powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
powerpc/module64: Use symbolic instructions names.
powerpc/module32: Use symbolic instructions names.
powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
powerpc/module64: Fix comment in R_PPC64_ENTRY handling
powerpc/boot: Add lzo support for uImage
powerpc/boot: Add lzma support for uImage
powerpc/boot: don't force gzipped uImage
powerpc/8xx: Add microcode patch to move SMC parameter RAM.
powerpc/8xx: Use IO accessors in microcode programming.
powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
powerpc/8xx: refactor programming of microcode CPM params.
powerpc/8xx: refactor printing of microcode patch name.
powerpc/8xx: Refactor microcode write
powerpc/8xx: refactor writing of CPM microcode arrays
...
Pull sparc updates from David Miller:
"Just a few small changes:
- Fix console naming inconsistency with hypervisor consoles, from
John Paul Adrian Glaubitz
- Fix userland compilation due to use of u_int, from Masahiro Yamada"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Add missing newline at end of file
sparc: fix unknown type name u_int in uapi header
sparc: configs: Remove useless UEVENT_HELPER_PATH
sparc: Remove redundant copy of the LGPL-2.0
sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg
1) Fix excessive stack usage in cxgb4, from Arnd Bergmann.
2) Missing skb queue lock init in tipc, from Chris Packham.
3) Fix some regressions in ipv6 flow label handling, from Eric Dumazet.
4) Elide flow dissection of local packets in FIB rules, from Petar
Penkov.
5) Fix TLS support build failure in mlx5, from Tariq Toukab.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits)
ppp: mppe: Revert "ppp: mppe: Add softdep to arc4"
net: dsa: qca8k: replace legacy gpio include
net: hisilicon: Use devm_platform_ioremap_resource
cxgb4: reduce kernel stack usage in cudbg_collect_mem_region()
tipc: ensure head->lock is initialised
tc-tests: updated skbedit tests
nfp: flower: ensure ip protocol is specified for L4 matches
nfp: flower: fix ethernet check on match fields
net/mlx5e: Provide cb_list pointer when setting up tc block on rep
net: phy: make exported variables non-static
net: sched: Fix NULL-pointer dereference in tc_indr_block_ing_cmd()
davinci_cpdma: don't cast dma_addr_t to pointer
net: openvswitch: do not update max_headroom if new headroom is equal to old headroom
net/mlx5e: Convert single case statement switch statements into if statements
net/mlx5: E-Switch, Reduce ingress acl modify metadata stack usage
net/mlx5e: Fix unused variable warning when CONFIG_MLX5_ESWITCH is off
net/mlx5e: Fix compilation error in TLS code
ipv6: fix static key imbalance in fl_create()
ipv6: fix potential crash in ip6_datagram_dst_update()
ipv6: tcp: fix flowlabels reflection for RST packets
...
Merge tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"This contains the following changes for MTD:
MTD core changes:
- New Hyperbus framework
- New _is_locked (concat) implementation
- Various cleanups
NAND core changes:
- use longest matching pattern in ->exec_op() default parser
- export NAND operation tracer
- add flag to indicate panic_write in MTD
- use kzalloc() instead of kmalloc() and memset()
Raw NAND controller drivers changes:
- brcmnand:
- fix BCH ECC layout for large page NAND parts
- fallback to detected ecc-strength, ecc-step-size
- when oops in progress use pio and interrupt polling
- code refactor code to introduce helper functions
- add support for v7.3 controller
- FSMC:
- use nand_op_trace for operation tracing
- GPMI:
- move all driver code into single file
- various cleanups (including dmaengine changes)
- use runtime PM to manage clocks
- implement exec_op
- MTK:
- correct low level time calculation of r/w cycle
- improve data sampling timing for read cycle
- add validity check for CE# pin setting
- fix wrongly assigned OOB buffer pointer issue
- re-license MTK NAND driver as Dual MIT/GPL
- STM32:
- manage the get_irq error case
- increase DMA completion timeouts
Raw NAND chips drivers changes:
- Macronix: add read-retry support
Onenand driver changes:
- add support for 8Gb datasize chips
- avoid fall-through warnings
SPI-NAND changes:
- define macros for page-read ops with three-byte addresses
- add support for two-byte device IDs and then for GigaDevice
GD5F1GQ4UFxxG
- add initial support for Paragon PN26G0xA
- handle the case where the last page read has bitflips
SPI-NOR core changes:
- add support for the mt25ql02g and w25q16jv flashes
- print error in case of jedec read id fails
- is25lp256: add post BFPT fix to correct the addr_width
SPI NOR controller drivers changes:
- intel-spi: Add support for Intel Elkhart Lake SPI serial flash
- smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c
- cadence-quadspi: add reset control"
* tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits)
mtd: concat: implement _is_locked mtd operation
mtd: concat: refactor concat_lock/concat_unlock
mtd: abi: do not use C++ style comments in uapi header
mtd: afs: remove unneeded NULL check
mtd: rawnand: stm32_fmc2: increase DMA completion timeouts
mtd: rawnand: Use kzalloc() instead of kmalloc() and memset()
mtd: hyperbus: Add driver for TI's HyperBus memory controller
mtd: spinand: read returns badly if the last page has bitflips
mtd: spinand: Add initial support for Paragon PN26G0xA
mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL
mtd: rawnand: gpmi: remove double assignment to block_size
dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support
mtd: rawnand: brcmnand: Add support for v7.3 controller
mtd: rawnand: brcmnand: Refactored code to introduce helper functions
mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling
mtd: Add flag to indicate panic_write
mtd: rawnand: Add Macronix NAND read retry support
mtd: onenand: Avoid fall-through warnings
mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
mtd: spinand: Add support for two-byte device IDs
...
Merge tag 'for-5.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Add encrypted byte-offset initialization vector (eboiv) to DM crypt.
- Add optional discard features to DM snapshot which allow freeing
space from a DM device whose free space was exhausted.
- Various small improvements to use struct_size() and kzalloc().
- Fix to check if DM thin metadata is in fail_io mode before attempting
to update the superblock to set the needs_check flag. Otherwise the
DM thin-pool can hang.
- Fix DM bufio shrinker's potential for ABBA recursion deadlock with DM
thin provisioning on loop usecase.
* tag 'for-5.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm bufio: fix deadlock with loop device
dm snapshot: add optional discard support features
dm crypt: implement eboiv - encrypted byte-offset initialization vector
dm crypt: remove obsolete comment about plumb IV
dm crypt: wipe private IV struct after key invalid flag is set
dm integrity: use kzalloc() instead of kmalloc() + memset()
dm: update stale comment in end_clone_bio()
dm log writes: fix incorrect comment about the logged sequence example
dm log writes: use struct_size() to calculate size of pending_block
dm crypt: use struct_size() when allocating encryption context
dm integrity: always set version on superblock update
dm thin metadata: check if in fail_io mode when setting needs_check
Merge tag 'for-linus-5.3' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Some small fixes for various things, nothing huge, mostly found by
automated tools.
Plus add a driver that allows Linux to act as an IPMB slave device, so
it can be a satellite MC in an IPMI network"
* tag 'for-linus-5.3' of git://github.com/cminyard/linux-ipmi:
docs: ipmb: place it at driver-api and convert to ReST
fix platform_no_drv_owner.cocci warnings
ipmi: ipmb: don't allocate i2c_client on stack
ipmi: ipmb: Fix build error while CONFIG_I2C is set to m
Add support for IPMB driver
drivers: ipmi: Drop device reference
ipmi_ssif: fix unexpected driver unregister warning
ipmi_si: use bool type for initialized variable
ipmi_si: fix unexpected driver unregister warning
Merge tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.3 kernel cycle:
Core changes:
- Device links can optionally be added between a pin control producer
and its consumers. This will affect how the system power management
is handled: a pin controller will not suspend before all of its
consumers have been suspended.
This was necessary for the ST Microelectronics STMFX expander and
need to be tested on other systems as well: it makes sense to make
this default in the long run.
Right now it is opt-in per driver.
- Drive strength can be specified in microamps. With decreases in
silicon technology, milliamps isn't granular enough, let's make it
possible to select drive strengths in microamps.
Right now the Meson (AMlogic) driver needs this.
New drivers:
- New subdriver for the Tegra 194 SoC.
- New subdriver for the Qualcomm SDM845.
- New subdriver for the Qualcomm SM8150.
- New subdriver for the Freescale i.MX8MN (Freescale is now a product
line of NXP).
- New subdriver for Marvell MV98DX1135.
Driver improvements:
- The Bitmain BM1880 driver now supports pin config in addition to
muxing.
- The Qualcomm drivers can now reserve some GPIOs as taken aside and
not usable for users. This is used in ACPI systems to take out some
GPIO lines used by the BIOS so that noone else (neither kernel nor
userspace) will play with them by mistake and crash the machine.
- A slew of refurbishing around the Aspeed drivers (board management
controllers for servers) in preparation for the new Aspeed AST2600
SoC.
- A slew of improvements over the SH PFC drivers as usual.
- Misc cleanups and fixes"
* tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
pinctrl: aspeed: Strip moved macros and structs from private header
pinctrl: aspeed: Fix missed include
pinctrl: baytrail: Use GENMASK() consistently
pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()
pinctrl: qcom: Add SM8150 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
dt-bindings: pinctrl: qcom: Document missing gpio nodes
pinctrl: aspeed: Add implementation-related documentation
pinctrl: aspeed: Split out pinmux from general pinctrl
pinctrl: aspeed: Clarify comment about strapping W1C
pinctrl: aspeed: Correct comment that is no longer true
MAINTAINERS: Add entry for ASPEED pinctrl drivers
dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
dt-bindings: pinctrl: aspeed: Split bindings document in two
pinctrl: qcom: Add irq_enable callback for msm gpio
pinctrl: madera: Fixup SPDX headers
pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
pinctrl: tegra: Add bitmask support for parked bits
...
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- an update to Elan touchpad SMBus driver to fetch device parameters
(size, resolution) while it is still in PS/2 mode, before switching
over to SMBus, as in that mode some devices return garbage dimensions
- update to iforce joystick driver
- miscellaneous driver fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (48 commits)
Input: gpio_keys_polled - allow specifying name of input device
Input: edt-ft5x06 - simplify event reporting code
Input: max77650-onkey - add MODULE_ALIAS()
Input: atmel_mxt_ts - fix leak in mxt_update_cfg()
Input: synaptics - enable SMBUS on T480 thinkpad trackpad
Input: atmel_mxt_ts - fix -Wunused-const-variable
Input: joydev - extend absolute mouse detection
HID: quirks: Refactor ELAN 400 and 401 handling
Input: elan_i2c - export the device id whitelist
Input: edt-ft5x06 - use get_unaligned_be16()
Input: iforce - add the Saitek R440 Force Wheel
Input: iforce - use unaligned accessors, where appropriate
Input: iforce - drop couple of temps from transport code
Input: iforce - drop bus type from iforce structure
Input: iforce - use DMA-safe buffores for USB transfers
Input: iforce - allow callers supply data buffer when fetching device IDs
Input: iforce - only call iforce_process_packet() if initialized
Input: iforce - signal command completion from transport code
Input: iforce - do not combine arguments for iforce_process_packet()
Input: iforce - factor out hat handling when parsing packets
...
Merge tag 'for-5.3/io_uring-20190711' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"This contains:
- Support for recvmsg/sendmsg as first class opcodes.
I don't envision going much further down this path, as there are
plans in progress to support potentially any system call in an
async fashion through io_uring. But I think it does make sense to
have certain core ops available directly, especially those that can
support a "try this non-blocking" flag/mode. (me)
- Handle generic short reads automatically.
This can happen fairly easily if parts of the buffered read is
cached. Since the application needs to issue another request for
the remainder, just do this internally and save kernel/user
roundtrip while providing a nicer more robust API. (me)
- Support for linked SQEs.
This allows SQEs to depend on each other, enabling an application
to eg queue a read-from-this-file,write-to-that-file pair. (me)
- Fix race in stopping SQ thread (Jackie)"
* tag 'for-5.3/io_uring-20190711' of git://git.kernel.dk/linux-block:
io_uring: fix io_sq_thread_stop running in front of io_sq_thread
io_uring: add support for recvmsg()
io_uring: add support for sendmsg()
io_uring: add support for sqe links
io_uring: punt short reads to async context
uio: make import_iovec()/compat_import_iovec() return bytes on success
Eric Biggers [Fri, 12 Jul 2019 23:39:31 +0000 (16:39 -0700)]
ppp: mppe: Revert "ppp: mppe: Add softdep to arc4"
Commit 0e5a610b5ca5 ("ppp: mppe: switch to RC4 library interface"),
which was merged through the crypto tree for v5.3, changed ppp_mppe.c to
use the new arc4_crypt() library function rather than access RC4 through
the dynamic crypto_skcipher API.
Meanwhile commit aad1dcc4f011 ("ppp: mppe: Add softdep to arc4") was
merged through the net tree and added a module soft-dependency on "arc4".
The latter commit no longer makes sense because the code now uses the
"libarc4" module rather than "arc4", and also due to the direct use of
arc4_crypt(), no module soft-dependency is required.
So revert the latter commit.
Cc: Takashi Iwai <tiwai@suse.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'dlm-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set removes some unnecessary debugfs error handling, and checks
that lowcomms workqueues are not NULL before destroying"
* tag 'dlm-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: no need to check return value of debugfs_create functions
dlm: check if workqueues are NULL before flushing/destroying
Merge tag 'f2fs-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've introduced native swap file support which can
exploit DIO, enhanced existing checkpoint=disable feature with
additional mount option to tune the triggering condition, and allowed
user to preallocate physical blocks in a pinned file which will be
useful to avoid f2fs fragmentation in append-only workloads. In
addition, we've fixed subtle quota corruption issue.
Enhancements:
- add swap file support which uses DIO
- allocate blocks for pinned file
- allow SSR and mount option to enhance checkpoint=disable
- enhance IPU IOs
- add more sanity checks such as memory boundary access
Bug fixes:
- quota corruption in very corner case of error-injected SPO case
- fix root_reserved on remount and some wrong counts
- add missing fsck flag
Some patches were also introduced to clean up ambiguous i_flags and
debugging messages codes"
* tag 'f2fs-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (33 commits)
f2fs: improve print log in f2fs_sanity_check_ckpt()
f2fs: avoid out-of-range memory access
f2fs: fix to avoid long latency during umount
f2fs: allow all the users to pin a file
f2fs: support swap file w/ DIO
f2fs: allocate blocks for pinned file
f2fs: fix is_idle() check for discard type
f2fs: add a rw_sem to cover quota flag changes
f2fs: set SBI_NEED_FSCK for xattr corruption case
f2fs: use generic EFSBADCRC/EFSCORRUPTED
f2fs: Use DIV_ROUND_UP() instead of open-coding
f2fs: print kernel message if filesystem is inconsistent
f2fs: introduce f2fs_<level> macros to wrap f2fs_printk()
f2fs: avoid get_valid_blocks() for cleanup
f2fs: ioctl for removing a range from F2FS
f2fs: only set project inherit bit for directory
f2fs: separate f2fs i_flags from fs_flags and ext4 i_flags
f2fs: replace ktype default_attrs with default_groups
f2fs: Add option to limit required GC for checkpoint=disable
f2fs: Fix accounting for unusable blocks
...
Merge tag 'xfs-5.3-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"In this release there are a significant amounts of consolidations and
cleanups in the log code; restructuring of the log to issue struct
bios directly; new bulkstat ioctls to return v5 fs inode information
(and fix all the padding problems of the old ioctl); the beginnings of
multithreaded inode walks (e.g. quotacheck); and a reduction in memory
usage in the online scrub code leading to reduced runtimes.
- Refactor inode geometry calculation into a single structure instead
of open-coding pieces everywhere.
- Add online repair to build options.
- Remove unnecessary function call flags and functions.
- Claim maintainership of various loose xfs documentation and header
files.
- Use struct bio directly for log buffer IOs instead of struct
xfs_buf.
- Reduce log item boilerplate code requirements.
- Merge log item code spread across too many files.
- Further distinguish between log item commits and cancellations.
- Various small cleanups to the ag small allocator.
- Support cgroup-aware writeback
- libxfs refactoring for mkfs cleanup
- Remove unneeded #includes
- Fix a memory allocation miscalculation in the new log bio code
- Fix bisection problems
- Fix a crash in ioend processing caused by tripping over freeing of
preallocated transactions
- Split out a generic inode walk mechanism from the bulkstat code,
hook up all the internal users to use the walking code, then clean
up bulkstat to serve only the bulkstat ioctls.
- Add a multithreaded iwalk implementation to speed up quotacheck on
fast storage with many CPUs.
- Remove unnecessary return values in logging teardown functions.
- Supplement the bstat and inogrp structures with new bulkstat and
inumbers structures that have all the fields we need for v5
filesystem features and none of the padding problems of their
predecessors.
- Wire up new ioctls that use the new structures with a much simpler
bulk_ireq structure at the head instead of the pointerhappy mess we
had before.
- Enable userspace to constrain bulkstat returns to a single AG or a
single special inode so that we can phase out a lot of geometry
guesswork in userspace.
- Reduce memory consumption and zeroing overhead in extended
attribute scrub code.
- Fix some behavioral regressions in the new bulkstat backend code.
- Fix some behavioral regressions in the new log bio code"
* tag 'xfs-5.3-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (100 commits)
xfs: chain bios the right way around in xfs_rw_bdev
xfs: bump INUMBERS cursor correctly in xfs_inumbers_walk
xfs: don't update lastino for FSBULKSTAT_SINGLE
xfs: online scrub needn't bother zeroing its temporary buffer
xfs: only allocate memory for scrubbing attributes when we need it
xfs: refactor attr scrub memory allocation function
xfs: refactor extended attribute buffer pointer functions
xfs: attribute scrub should use seen_enough to pass error values
xfs: allow single bulkstat of special inodes
xfs: specify AG in bulk req
xfs: wire up the v5 inumbers ioctl
xfs: wire up new v5 bulkstat ioctls
xfs: introduce v5 inode group structure
xfs: introduce new v5 bulkstat structure
xfs: rename bulkstat functions
xfs: remove various bulk request typedef usage
fs: xfs: xfs_log: Change return type from int to void
xfs: poll waiting for quotacheck
xfs: multithreaded iwalk implementation
xfs: refactor INUMBERS to use iwalk functions
...
Merge tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull common SETFLAGS/FSSETXATTR parameter checking from Darrick Wong:
"Here's a patch series that sets up common parameter checking functions
for the FS_IOC_SETFLAGS and FS_IOC_FSSETXATTR ioctl implementations.
The goal here is to reduce the amount of behaviorial variance between
the filesystems where those ioctls originated (ext2 and XFS,
respectively) and everybody else.
- Standardize parameter checking for the SETFLAGS and FSSETXATTR
ioctls (which were the file attribute setters for ext4 and xfs and
have now been hoisted to the vfs)
- Only allow the DAX flag to be set on files and directories"
* tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
vfs: only allow FSSETXATTR to set DAX flag on files and dirs
vfs: teach vfs_ioc_fssetxattr_check to check extent size hints
vfs: teach vfs_ioc_fssetxattr_check to check project id info
vfs: create a generic checking function for FS_IOC_FSSETXATTR
vfs: create a generic checking and prep function for FS_IOC_SETFLAGS
Merge tag 'linux-kselftest-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"This Kselftest update for Linux 5.3-rc1 consists of build failure
fixes and minor code cleaning patch to remove duplicate headers"
* tag 'linux-kselftest-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
rseq/selftests: Fix Thumb mode build failure on arm32
kselftests: cgroup: remove duplicated include from test_freezer.c
selftests: timestamping: Fix SIOCGSTAMP undeclared build failure
selftests: dma-buf: Adding kernel config fragment CONFIG_UDMABUF=y
Merge tag 'kconfig-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- always require argument for --defconfig and remove the hard-coded
arch/$(ARCH)/defconfig path
- make arch/$(SRCARCH)/configs/defconfig the new default of defconfig
- some code cleanups
* tag 'kconfig-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: remove meaningless if-conditional in conf_read()
kconfig: Fix spelling of sym_is_changable
unicore32: rename unicore32_defconfig to defconfig
kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIG
kconfig: add static qualifier to expand_string()
kconfig: require the argument of --defconfig
kconfig: remove always false ifeq ($(KBUILD_DEFCONFIG,) conditional
- propagate 'No space left on device' error in fixdep to Make
- allow Clang to use its integrated assembler
- improve some coccinelle scripts
- add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute
path for $(srctree).
- do not ignore errors when compression utility is missing
- misc cleanups
* tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits)
kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix
kbuild: Inform user to pass ARCH= for make mrproper
kbuild: fix compression errors getting ignored
kbuild: add a flag to force absolute path for srctree
kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree
kbuild: remove src and obj from the top Makefile
scripts/tags.sh: remove unused environment variables from comments
scripts/tags.sh: drop SUBARCH support for ARM
kbuild: compile-test kernel headers to ensure they are self-contained
kheaders: include only headers into kheaders_data.tar.xz
kheaders: remove meaningless -R option of 'ls'
kbuild: support header-test-pattern-y
kbuild: do not create wrappers for header-test-y
kbuild: compile-test exported headers to ensure they are self-contained
init/Kconfig: add CONFIG_CC_CAN_LINK
kallsyms: exclude kasan local symbols on s390
kbuild: add more hints about SUBDIRS replacement
coccinelle: api/stream_open: treat all wait_.*() calls as blocking
coccinelle: put_device: Add a cast to an expression for an assignment
coccinelle: put_device: Adjust a message construction
...
Merge tag 'asm-generic-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic changes for 5.3 consist of a cleanup series to remove
ptrace.h from Christoph Hellwig, who explains:
'asm-generic/ptrace.h is a little weird in that it doesn't actually
implement any functionality, but it provided multiple layers of
macros that just implement trivial inline functions. We implement
those directly in the few architectures and be off with a much
simpler design.'
at https://lore.kernel.org/lkml/20190624054728.30966-1-hch@lst.de/"
* tag 'asm-generic-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: remove ptrace.h
x86: don't use asm-generic/ptrace.h
sh: don't use asm-generic/ptrace.h
powerpc: don't use asm-generic/ptrace.h
arm64: don't use asm-generic/ptrace.h
- Add CPU measurement counters for newer machines.
- Add base DASD thin provisioning support and code cleanups.
* tag 's390-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits)
s390/unwind: avoid int overflow in outside_of_stack
s390/zcrypt: remove the exporting of ap_query_configuration
s390/pci: add mio_enabled attribute
s390: fix setting of mio addressing control
s390/ipl: Fix detection of has_secure attribute
s390: vfio-ap: fix irq registration
s390/cpumf: Add extended counter set definitions for model 8561 and 8562
s390/dasd: Handle out-of-space constraint
s390/dasd: Add discard support for ESE volumes
s390/dasd: Use ALIGN_DOWN macro
s390/dasd: Make dasd_setup_queue() a discipline function
s390/dasd: Add new ioctl to release space
s390/dasd: Add dasd_sleep_on_queue_interruptible()
s390/dasd: Add missing intensity definition
s390/dasd: Fix whitespace
s390/dasd: Add dynamic formatting support for ESE volumes
s390/dasd: Recognise data for ESE volumes
s390/dasd: Put sub-order definitions in a separate section
s390/dasd: Make layout analysis ESE compatible
s390/dasd: Remove old defines and function
...
This patch replaces the legacy bulk gpio.h include
with the proper gpio/consumer.h variant. This was
caught by the kbuild test robot that was running
into an error because of this.
For more information why linux/gpio.h is bad can be found in:
commit 56a46b6144e7 ("gpio: Clarify that <linux/gpio.h> is legacy")
Reported-by: kbuild test robot <lkp@intel.com> Link: https://www.spinics.net/lists/netdev/msg584447.html Fixes: a653f2f538f9 ("net: dsa: qca8k: introduce reset via gpio feature") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / thirdparty / linux.git / log
