Linus Torvalds [Fri, 24 Oct 2025 17:45:29 +0000 (10:45 -0700)]
Merge tag 'gpio-fixes-for-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix regressions in regmap cache initialization in gpio-104-idio-16
and gpio-pci-idio-16
- configure first 16 GPIO lines of the IDIO-16 as fixed outputs
- fix duplicated IRQ mapping that can lead to an RCU stall in gpio-ljca
- fix printf formatters passed to dev_err() and make failure to set
debounce period non fatal
* tag 'gpio-fixes-for-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ljca: Fix duplicated IRQ mapping
gpiolib: acpi: Use %pe when passing an error pointer to dev_err()
gpiolib: acpi: Make set debounce errors non fatal
gpio: idio-16: Define fixed direction of the GPIO lines
gpio: regmap: add the .fixed_direction_output configuration parameter
gpio: pci-idio-16: Define maximum valid register address offset
gpio: 104-idio-16: Define maximum valid register address offset
Stephen Rothwell [Wed, 22 Oct 2025 05:36:25 +0000 (16:36 +1100)]
MAINTAINERS: add Mark Brown as a linux-next maintainer
Mark has been kindly helping fill in when I have been unavailable over
the past several years. He has also put his hand up to take over
linux-next maintenance when I finally decide to stop (which may be some
time yet ;-) ).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 23 Oct 2025 23:50:25 +0000 (16:50 -0700)]
Merge tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"A couple of fixes for Runtime Verification:
- A bug caused a kernel panic when reading enabled_monitors was
reported.
Change callback functions to always use list_head iterators and by
doing so, fix the wrong pointer that was leading to the panic.
- The rtapp/pagefault monitor relies on the MMU to be present
(pagefaults exist) but that was not enforced via kconfig, leading
to potential build errors on systems without an MMU.
Add that kconfig dependency"
* tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Make rtapp/pagefault monitor depends on CONFIG_MMU
rv: Fully convert enabled_monitors to use list_head as iterator
Linus Torvalds [Thu, 23 Oct 2025 19:26:47 +0000 (09:26 -1000)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Do not make a clean PTE dirty in pte_mkwrite()
The Arm architecture, for backwards compatibility reasons (ARMv8.0
before in-hardware dirty bit management - DBM), uses the PTE_RDONLY
bit to mean !dirty while the PTE_WRITE bit means DBM enabled. The
arm64 pte_mkwrite() simply clears the PTE_RDONLY bit and this
inadvertently makes the PTE pte_hw_dirty(). Most places making a PTE
writable also invoke pte_mkdirty() but do_swap_page() does not and we
end up with dirty, freshly swapped in, writeable pages.
- Do not warn if the destination page is already MTE-tagged in
copy_highpage()
In the majority of the cases, a destination page copied into is
freshly allocated without the PG_mte_tagged flag set. However, the
folio migration may be restarted if __folio_migrate_mapping() failed,
triggering the benign WARN_ON_ONCE().
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
arm64, mm: avoid always making PTE dirty in pte_mkwrite()
Linus Torvalds [Thu, 23 Oct 2025 17:03:18 +0000 (07:03 -1000)]
Merge tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
Linus Torvalds [Thu, 23 Oct 2025 16:53:12 +0000 (06:53 -1000)]
Merge tag 'acpi-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a fallout of a recent ACPI properties management update and
work around a compiler bug in ACPICA:
- Fix a recent coding mistake causing __acpi_node_get_property_reference()
arguments to be put in an incorrect order (Sunil V L)
- Work around bogus -Wstringop-overread warning on LoongArch since
GCC 11 in ACPICA (Xi Ruoyao)"
* tag 'acpi-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Work around bogus -Wstringop-overread warning since GCC 11
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
Linus Torvalds [Thu, 23 Oct 2025 16:48:32 +0000 (06:48 -1000)]
Merge tag 'pm-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert a cpuidle menu governor commit leading to a performance
regression, fix an amd-pstate driver regression introduced recently,
and fix new conditional guard definitions for runtime PM.
- Add missing _RET == 0 condition to recently introduced conditional
guard definitions for runtime PM (Rafael Wysocki)
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)"
* tag 'pm-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix conditional guard definitions
Revert "cpuidle: menu: Avoid discarding useful information"
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
Linus Torvalds [Thu, 23 Oct 2025 16:44:43 +0000 (06:44 -1000)]
Merge tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in send, fix duplicated rmdir operations when using extrefs
(hardlinks), receive can fail with ENOENT
- fixup of error check when reading extent root in ref-verify and
damaged roots are allowed by mount option (found by smatch)
- fix freeing partially initialized fs info (found by syzkaller)
- fix use-after-free when printing ref_tracking status of delayed
inodes
* tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ref-verify: fix IS_ERR() vs NULL check in btrfs_build_ref_tree()
btrfs: fix delayed_node ref_tracker use after free
btrfs: send: fix duplicated rmdir operations when using extrefs
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
Catalin Marinas [Wed, 22 Oct 2025 10:09:14 +0000 (11:09 +0100)]
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
The arm64 copy_highpage() assumes that the destination page is newly
allocated and not MTE-tagged (PG_mte_tagged unset) and warns
accordingly. However, following commit 060913999d7a ("mm: migrate:
support poisoned recover from migrate folio"), folio_mc_copy() is called
before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the
copy will be done again to the same destination page. Since
copy_highpage() already set the PG_mte_tagged flag, this second copy
will warn.
Replace the WARN_ON_ONCE(page already tagged) in the arm64
copy_highpage() with a comment.
Reported-by: syzbot+d1974fc28545a3e6218b@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/68dda1ae.a00a0220.102ee.0065.GAE@google.com Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: stable@vger.kernel.org # 6.12.x Reviewed-by: Yang Shi <yang@os.amperecomputing.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we do mlx5e_detach_netdev() we eventually disable blocking events
notifier, among those events are IPsec MPV events from IB to core.
So before disabling those blocking events, make sure to also unregister
the devcom device and mark all this device operations as complete,
in order to prevent the other device from using invalid netdev
during future devcom events which could cause the trace below.
net/mlx5: Refactor devcom to return NULL on failure
Devcom device and component registration isn't always critical to the
functionality of the caller, hence the registration can fail and we can
continue working with an ERR_PTR value saved inside a variable.
In order to avoid that make sure all devcom failures return NULL.
Alexei Lazar [Wed, 22 Oct 2025 12:29:39 +0000 (15:29 +0300)]
net/mlx5: Add PPHCR to PCAM supported registers mask
Add the PPHCR bit to the port_access_reg_cap_mask field of PCAM
register to indicate that the device supports the PPHCR register
and the RS-FEC histogram feature.
Jason Wang [Wed, 22 Oct 2025 03:44:21 +0000 (11:44 +0800)]
virtio-net: zero unused hash fields
When GSO tunnel is negotiated virtio_net_hdr_tnl_from_skb() tries to
initialize the tunnel metadata but forget to zero unused rxhash
fields. This may leak information to another side. Fixing this by
zeroing the unused hash fields.
Acked-by: Michael S. Tsirkin <mst@redhat.com> Fixes: a2fb4bc4e2a6a ("net: implement virtio helpers to handle UDP GSO tunneling") Cc: <stable@vger.kernel.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://patch.msgid.link/20251022034421.70244-1-jasowang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Robert Marko [Tue, 21 Oct 2025 13:20:26 +0000 (15:20 +0200)]
net: phy: micrel: always set shared->phydev for LAN8814
Currently, during the LAN8814 PTP probe shared->phydev is only set if PTP
clock gets actually set, otherwise the function will return before setting
it.
This is an issue as shared->phydev is unconditionally being used when IRQ
is being handled, especially in lan8814_gpio_process_cap and since it was
not set it will cause a NULL pointer exception and crash the kernel.
So, simply always set shared->phydev to avoid the NULL pointer exception.
Fixes: b3f1a08fcf0d ("net: phy: micrel: Add support for PTP_PF_EXTTS for lan8814") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20251021132034.983936-1-robert.marko@sartura.hr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vsock: fix lock inversion in vsock_assign_transport()
Syzbot reported a potential lock inversion deadlock between
vsock_register_mutex and sk_lock-AF_VSOCK when vsock_linger() is called.
The issue was introduced by commit 687aa0c5581b ("vsock: Fix
transport_* TOCTOU") which added vsock_register_mutex locking in
vsock_assign_transport() around the transport->release() call, that can
call vsock_linger(). vsock_assign_transport() can be called with sk_lock
held. vsock_linger() calls sk_wait_event() that temporarily releases and
re-acquires sk_lock. During this window, if another thread hold
vsock_register_mutex while trying to acquire sk_lock, a circular
dependency is created.
Fix this by releasing vsock_register_mutex before calling
transport->release() and vsock_deassign_transport(). This is safe
because we don't need to hold vsock_register_mutex while releasing the
old transport, and we ensure the new transport won't disappear by
obtaining a module reference first via try_module_get().
====================
fix poll behaviour for TCP-based tunnel protocols
This patch series introduces a polling function for datagram-style
sockets that operates on custom skb queues, and updates ovpn (the
OpenVPN data-channel offload module) and espintcp (the TCP Encapsulation
of IKE and IPsec Packets implementation) to use it accordingly.
Protocols like the aforementioned one decapsulate packets received over
TCP and deliver userspace-bound data through a separate skb queue, not
the standard sk_receive_queue. Previously, both relied on
datagram_poll(), which would signal readiness based on non-userspace
packets, leading to misleading poll results and unnecessary recv
attempts in userspace.
Patch 1 introduces datagram_poll_queue(), a variant of datagram_poll()
that accepts an explicit receive queue. This builds on the approach
introduced in commit b50b058, which extended other skb-related functions
to support custom queues. Patch 2 and 3 update espintcp_poll() and
ovpn_tcp_poll() respectively to use this helper, ensuring readiness is
only signaled when userspace data is available.
Each patch is self-contained and the ovpn one includes rationale and
lifecycle enforcement where appropriate.
====================
Ralf Lici [Tue, 21 Oct 2025 10:09:42 +0000 (12:09 +0200)]
ovpn: use datagram_poll_queue for socket readiness in TCP
openvpn TCP encapsulation uses a custom queue to deliver packets to
userspace. Currently it relies on datagram_poll, which checks
sk_receive_queue, leading to false readiness signals when that queue
contains non-userspace packets.
Switch ovpn_tcp_poll to use datagram_poll_queue with the peer's
user_queue, ensuring poll only signals readiness when userspace data is
actually available. Also refactor ovpn_tcp_poll in order to enforce the
assumption we can make on the lifetime of ovpn_sock and peer.
Ralf Lici [Tue, 21 Oct 2025 10:09:41 +0000 (12:09 +0200)]
espintcp: use datagram_poll_queue for socket readiness
espintcp uses a custom queue (ike_queue) to deliver packets to
userspace. The polling logic relies on datagram_poll, which checks
sk_receive_queue, which can lead to false readiness signals when that
queue contains non-userspace packets.
Switch espintcp_poll to use datagram_poll_queue with ike_queue, ensuring
poll only signals readiness when userspace data is actually available.
Ralf Lici [Tue, 21 Oct 2025 10:09:40 +0000 (12:09 +0200)]
net: datagram: introduce datagram_poll_queue for custom receive queues
Some protocols using TCP encapsulation (e.g., espintcp, openvpn) deliver
userspace-bound packets through a custom skb queue rather than the
standard sk_receive_queue.
Introduce datagram_poll_queue that accepts an explicit receive queue,
and convert datagram_poll into a wrapper around datagram_poll_queue.
This allows protocols with custom skb queues to reuse the core polling
logic without relying on sk_receive_queue.
Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: Antonio Quartulli <antonio@openvpn.net> Signed-off-by: Ralf Lici <ralf@mandelbit.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Antonio Quartulli <antonio@openvpn.net> Link: https://patch.msgid.link/20251021100942.195010-2-ralf@mandelbit.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Haotian Zhang [Thu, 23 Oct 2025 07:02:30 +0000 (15:02 +0800)]
gpio: ljca: Fix duplicated IRQ mapping
The generic_handle_domain_irq() function resolves the hardware IRQ
internally. The driver performed a duplicative mapping by calling
irq_find_mapping() first, which could lead to an RCU stall.
Delete the redundant irq_find_mapping() call and pass the hardware IRQ
directly to generic_handle_domain_irq().
Fixes: c5a4b6fd31e8 ("gpio: Add support for Intel LJCA USB GPIO driver") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20251023070231.1305-1-vulab@iscas.ac.cn
[Bartosz: remove unused variable] Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Merge an ACPI device properties handling change fixing the order of
__acpi_node_get_property_reference() arguments broken by a recent
update (Sunil V L)
* 'acpi-property':
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)
Tonghao Zhang [Tue, 21 Oct 2025 05:09:33 +0000 (13:09 +0800)]
net: bonding: fix possible peer notify event loss or dup issue
If the send_peer_notif counter and the peer event notify are not synchronized.
It may cause problems such as the loss or dup of peer notify event.
Before this patch:
- If should_notify_peers is true and the lock for send_peer_notif-- fails, peer
event may be sent again in next mii_monitor loop, because should_notify_peers
is still true.
- If should_notify_peers is true and the lock for send_peer_notif-- succeeded,
but the lock for peer event fails, the peer event will be lost.
This patch locks the RTNL for send_peer_notif, events, and commit simultaneously.
Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications") Cc: Jay Vosburgh <jv@jvosburgh.net> Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Hangbin Liu <liuhangbin@gmail.com> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Vincent Bernat <vincent@bernat.ch> Cc: <stable@vger.kernel.org> Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Link: https://patch.msgid.link/20251021050933.46412-1-tonghao@bamaicloud.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andy Shevchenko [Thu, 23 Oct 2025 06:39:58 +0000 (08:39 +0200)]
gpiolib: acpi: Use %pe when passing an error pointer to dev_err()
One of the coccinelle recipe suggests to use %pe when we deal with
an error pointer. Do it so.
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@inria.fr> Closes: https://lore.kernel.org/r/202510231350.calxvXIm-lkp@intel.com/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Hans de Goede [Wed, 22 Oct 2025 13:37:15 +0000 (15:37 +0200)]
gpiolib: acpi: Make set debounce errors non fatal
Commit 16c07342b542 ("gpiolib: acpi: Program debounce when finding GPIO")
adds a gpio_set_debounce_timeout() call to acpi_find_gpio() and makes
acpi_find_gpio() fail if this fails.
But gpio_set_debounce_timeout() failing is a somewhat normal occurrence,
since not all debounce values are supported on all GPIO/pinctrl chips.
Making this an error for example break getting the card-detect GPIO for
the micro-sd slot found on many Bay Trail tablets, breaking support for
the micro-sd slot on these tablets.
acpi_request_own_gpiod() already treats gpio_set_debounce_timeout()
failures as non-fatal, just warning about them.
Add a acpi_gpio_set_debounce_timeout() helper which wraps
gpio_set_debounce_timeout() and warns on failures and replace both existing
gpio_set_debounce_timeout() calls with the helper.
Since the helper only warns on failures this fixes the card-detect issue.
Fixes: 16c07342b542 ("gpiolib: acpi: Program debounce when finding GPIO") Cc: stable@vger.kernel.org Cc: Mario Limonciello <superm1@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Acked-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/stable/20250920201200.20611-1-hansg%40kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
net: hsr: prevent creation of HSR device with slaves from another netns
HSR/PRP driver does not handle correctly having slaves/interlink devices
in a different net namespace. Currently, it is possible to create a HSR
link in a different net namespace than the slaves/interlink with the
following command:
ip link add hsr0 netns hsr-ns type hsr slave1 eth1 slave2 eth2
As there is no use-case on supporting this scenario, enforce that HSR
device link matches netns defined by IFLA_LINK_NETNSID.
The iproute2 command mentioned above will throw the following error:
Error: hsr: HSR slaves/interlink must be on the same net namespace than HSR link.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Link: https://patch.msgid.link/20251020135533.9373-1-fmancera@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexey Simakov [Tue, 21 Oct 2025 13:00:36 +0000 (16:00 +0300)]
sctp: avoid NULL dereference when chunk data buffer is missing
chunk->skb pointer is dereferenced in the if-block where it's supposed
to be NULL only.
chunk->skb can only be NULL if chunk->head_skb is not. Check for frag_list
instead and do it just before replacing chunk->skb. We're sure that
otherwise chunk->skb is non-NULL because of outer if() condition.
Jiasheng Jiang [Tue, 21 Oct 2025 18:24:56 +0000 (18:24 +0000)]
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
In ptp_ocp_sma_fb_init(), the code mistakenly used bp->sma[1]
instead of bp->sma[i] inside a for-loop, which caused only SMA[1]
to have its DIRECTION_CAN_CHANGE capability cleared. This led to
inconsistent capability flags across SMA pins.
This series addresses several issues in the Renesas Ethernet AVB (ravb)
driver related descriptor ordering.
A potential ordering hazard in descriptor setup could cause
the DMA engine to start prematurely, leading to TX stalls on some
platforms.
The series includes the following changes:
Enforce descriptor type ordering to prevent early DMA start
Ensure proper write ordering of TX descriptor type fields to prevent the
DMA engine from observing an incomplete descriptor chain. This fixes
observed TX stalls on RZ/G2L platforms running RT kernels.
Tested on R/G1x Gen2, RZ/G2x Gen3 and RZ/G2L family hardware.
====================
Lad Prabhakar [Fri, 17 Oct 2025 15:18:30 +0000 (16:18 +0100)]
net: ravb: Ensure memory write completes before ringing TX doorbell
Add a final dma_wmb() barrier before triggering the transmit request
(TCCR_TSRQ) to ensure all descriptor and buffer writes are visible to
the DMA engine.
According to the hardware manual, a read-back operation is required
before writing to the doorbell register to guarantee completion of
previous writes. Instead of performing a dummy read, a dma_wmb() is
used to both enforce the same ordering semantics on the CPU side and
also to ensure completion of writes.
Lad Prabhakar [Fri, 17 Oct 2025 15:18:29 +0000 (16:18 +0100)]
net: ravb: Enforce descriptor type ordering
Ensure the TX descriptor type fields are published in a safe order so the
DMA engine never begins processing a descriptor chain before all descriptor
fields are fully initialised.
For multi-descriptor transmits the driver writes DT_FEND into the last
descriptor and DT_FSTART into the first. The DMA engine begins processing
when it observes DT_FSTART. Move the dma_wmb() barrier so it executes
immediately after DT_FEND and immediately before writing DT_FSTART
(and before DT_FSINGLE in the single-descriptor case). This guarantees
that all prior CPU writes to the descriptor memory are visible to the
device before DT_FSTART is seen.
This avoids a situation where compiler/CPU reordering could publish
DT_FSTART ahead of DT_FEND or other descriptor fields, allowing the DMA to
start on a partially initialised chain and causing corrupted transmissions
or TX timeouts. Such a failure was observed on RZ/G2L with an RT kernel as
transmit queue timeouts and device resets.
Linus Torvalds [Thu, 23 Oct 2025 01:00:34 +0000 (15:00 -1000)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All driver fixes. The big change is the storvsc one to rejig the
hyper-v channel handling to be more efficient for SMP virtual
machines"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Kaanapali
scsi: ufs: qcom: dt-bindings: Document the Kaanapali UFS controller
scsi: libfc: Prevent integer overflow in fc_fcp_recv_data()
scsi: qla4xxx: Fix typos in comments
scsi: storvsc: Prefer returning channel with the same CPU as on the I/O issuing CPU
Linus Torvalds [Thu, 23 Oct 2025 00:57:35 +0000 (14:57 -1000)]
Merge tag 'mm-hotfixes-stable-2025-10-22-12-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"17 hotfixes. 12 are cc:stable and 14 are for MM.
There's a two-patch DAMON series from SeongJae Park which addresses a
missed check and possible memory leak. Apart from that it's all
singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-10-22-12-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
csky: abiv2: adapt to new folio flags field
mm/damon/core: use damos_commit_quota_goal() for new goal commit
mm/damon/core: fix potential memory leak by cleaning ops_filter in damon_destroy_scheme
hugetlbfs: move lock assertions after early returns in huge_pmd_unshare()
vmw_balloon: indicate success when effectively deflating during migration
mm/damon/core: fix list_add_tail() call on damon_call()
mm/mremap: correctly account old mapping after MREMAP_DONTUNMAP remap
mm: prevent poison consumption when splitting THP
ocfs2: clear extent cache after moving/defragmenting extents
mm: don't spin in add_stack_record when gfp flags don't allow
dma-debug: don't report false positives with DMA_BOUNCE_UNALIGNED_KMALLOC
mm/damon/sysfs: dealloc commit test ctx always
mm/damon/sysfs: catch commit test ctx alloc failure
hung_task: fix warnings caused by unaligned lock pointers
Linus Torvalds [Wed, 22 Oct 2025 15:17:32 +0000 (05:17 -1000)]
Merge tag 'platform-drivers-x86-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi-wmax:
- Fix NULL pointer dereference in sleep handlers
- Add AWCC support to Dell G15 5530
- mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init
* tag 'platform-drivers-x86-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: alienware-wmi-wmax: Add AWCC support to Dell G15 5530
MAINTAINERS: add Denis Benato as maintainer for asus notebooks
platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init
platform/x86: alienware-wmi-wmax: Fix NULL pointer dereference in sleep handlers
Since pm_runtime_get_active() returns 0 on success, all of the
DEFINE_GUARD_COND() macros in pm_runtime.h need the "_RET == 0"
condition at the end of the argument list or they would not work
correctly.
Leo Martins [Mon, 20 Oct 2025 23:16:15 +0000 (16:16 -0700)]
btrfs: fix delayed_node ref_tracker use after free
Move the print before releasing the delayed node.
In my initial testing there was a bug that was causing delayed_nodes
to not get freed which is why I put the print after the release. This
obviously neglects the case where the delayed node is properly freed.
Add condition to make sure we only print if we have more than one
reference to the delayed_node to prevent printing when we only have
the reference taken in btrfs_kill_all_delayed_nodes().
Fixes: b767a28d6154 ("btrfs: print leaked references in kill_all_delayed_nodes()") Tested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Leo Martins <loemra.dev@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
gpio: idio-16: Define fixed direction of the GPIO lines
The direction of the IDIO-16 GPIO lines is fixed with the first 16 lines
as output and the remaining 16 lines as input. Set the gpio_config
fixed_direction_output member to represent the fixed direction of the
GPIO lines.
Fixes: db02247827ef ("gpio: idio-16: Migrate to the regmap API") Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com> Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com Suggested-by: Michael Walle <mwalle@kernel.org> Cc: stable@vger.kernel.org # ae495810cffe: gpio: regmap: add the .fixed_direction_output configuration parameter Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <wbg@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-3-ebeb50e93c33@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Ioana Ciornei [Tue, 14 Oct 2025 15:53:53 +0000 (18:53 +0300)]
gpio: regmap: add the .fixed_direction_output configuration parameter
There are GPIO controllers such as the one present in the LX2160ARDB
QIXIS FPGA which have fixed-direction input and output GPIO lines mixed
together in a single register. This cannot be modeled using the
gpio-regmap as-is since there is no way to present the true direction of
a GPIO line.
In order to make this use case possible, add a new configuration
parameter - fixed_direction_output - into the gpio_regmap_config
structure. This will enable user drivers to provide a bitmap that
represents the fixed direction of the GPIO lines.
That commit broke cache=mmap, a mode that doesn't cache metadata,
but still has writeback cache.
In commit 290434474c33 ("fs/9p: Refresh metadata in d_revalidate
for uncached mode too") we considered metadata cache to be enough to
not look at the server, but in writeback cache too looking at the server
size would make the vfs consider the file has been truncated before the
data has been flushed out, making the following repro fail (nothing is
ever read back, the resulting file ends up with no data written)
```
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
char buf[4096];
int main(int argc, char *argv[])
{
int ret, i;
int fdw, fdr;
if (fdr < 0) {
fprintf(stderr, "cannot open fdr\n");
close(fdw);
return 1;
}
for (i = 0; i < 10; i++) {
ret = read(fdr, buf, sizeof(buf));
fprintf(stderr, "i: %d, read returns %d\n", i, ret);
}
close(fdr);
close(fdw);
return 0;
}
```
There is a fix for this particular reproducer but it looks like there
are other problems around metadata refresh (e.g. around file rename), so
revert this to avoid d_revalidate in uncached mode for now.
Heiner Kallweit [Mon, 20 Oct 2025 06:54:54 +0000 (08:54 +0200)]
net: hibmcge: select FIXED_PHY
hibmcge uses fixed_phy_register() et al, but doesn't cater for the case
that hibmcge is built-in and fixed_phy is a module. To solve this
select FIXED_PHY.
Fixes: 1d7cd7a9c69c ("net: hibmcge: support scenario without PHY") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/c4fc061f-b6d5-418b-a0dc-6b238cdbedce@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This issue can occur when the link state changes from off to on
(e.g., plugging or unplugging the LAN cable) while transmitting a
packet. If the skb has a destructor, a warning message may be
printed in this situation.
Jakub Kicinski [Wed, 22 Oct 2025 00:42:54 +0000 (17:42 -0700)]
Merge tag 'linux-can-fixes-for-6.18-20251020' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-10-20
All patches are by me. The first 3 update the bxcan, esd and rockchip
driver to drop skbs in xmit of the device is in listen only mode.
The last patch targets the CAN netlink implementation to allow the
disabling of automatic restart after Bus-Off, even if the a driver
doesn't implement that callback.
* tag 'linux-can-fixes-for-6.18-20251020' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: can_changelink(): allow disabling of automatic restart
can: rockchip-canfd: rkcanfd_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
can: esd: acc_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
can: bxcan: bxcan_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
====================
Given the introduction of @have_bh_lock variable, it seems the author
intent was to have the local_unlock_nested_bh() after the @unlock label.
Fixes: 25718fdcbdd2 ("net: gro_cells: Use nested-BH locking for gro_cell") Reported-by: syzbot+f9651b9a8212e1c8906f@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/68f65eb9.a70a0220.205af.0034.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20251020161114.1891141-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
mptcp: handle late ADD_ADDR + selftests skip
Here are a few independent fixes related to MPTCP and its selftests:
- Patch 1: correctly handle ADD_ADDR being received after the switch to
'fully-established'. A fix for another recent fix backported up to
v5.14.
- Patches 2-5: properly mark some MPTCP Join subtests as 'skipped' if
the tested kernel doesn't support the feature being validated. Some
fixes for up to v5.13, v5.18, v6.11 and v6.18-rc1 respectively.
====================
mptcp: pm: in-kernel: C-flag: handle late ADD_ADDR
The special C-flag case expects the ADD_ADDR to be received when
switching to 'fully-established'. But for various reasons, the ADD_ADDR
could be sent after the "4th ACK", and the special case doesn't work.
On NIPA, the new test validating this special case for the C-flag failed
a few times, e.g.
102 default limits, server deny join id 0
syn rx [FAIL] got 0 JOIN[s] syn rx expected 2
Server ns stats
(...)
MPTcpExtAddAddrTx 1
MPTcpExtEchoAdd 1
synack rx [FAIL] got 0 JOIN[s] synack rx expected 2
ack rx [FAIL] got 0 JOIN[s] ack rx expected 2
join Rx [FAIL] see above
syn tx [FAIL] got 0 JOIN[s] syn tx expected 2
join Tx [FAIL] see above
I had a suspicion about what the issue could be: the ADD_ADDR might have
been received after the switch to the 'fully-established' state. The
issue was not easy to reproduce. The packet capture shown that the
ADD_ADDR can indeed be sent with a delay, and the client would not try
to establish subflows to it as expected.
A simple fix is not to mark the endpoints as 'used' in the C-flag case,
when looking at creating subflows to the remote initial IP address and
port. In this case, there is no need to try.
Note: newly added fullmesh endpoints will still continue to be used as
expected, thanks to the conditions behind mptcp_pm_add_addr_c_flag_case.
Move the corresponding check for full compress indexes to
`z_erofs_load_lcluster_from_disk()` to also cover subpage compact
compress indexes.
It also fixes the position of `m->type >= Z_EROFS_LCLUSTER_TYPE_MAX`
check, since it should be placed right after
`z_erofs_load_{compact,full}_lcluster()`.
Fixes: 8d2517aaeea3 ("erofs: fix up compacted indexes for block size < 4096") Fixes: 1a5223c182fd ("erofs: do sanity check on m->type in z_erofs_load_compact_lcluster()") Reported-by: Robert Morris <rtm@csail.mit.edu> Closes: https://lore.kernel.org/r/35167.1760645886@localhost Reviewed-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Recent changes require the raw folio flags to be accessed via ".f". The
merge commit introducing this change adapted most architecture code but
forgot the csky abiv2.
[rppt@kernel.org: add fix for arch/csky/abiv2/cacheflush.c] Link: https://lkml.kernel.org/r/aPCE238oxAB9QcZa@kernel.org Fixes: 53fbef56e07d ("mm: introduce memdesc_flags_t") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Acked-by: Zi Yan <ziy@nvidia.com> Cc: Guo Ren <guoren@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Tue, 14 Oct 2025 00:18:44 +0000 (17:18 -0700)]
mm/damon/core: use damos_commit_quota_goal() for new goal commit
When damos_commit_quota_goals() is called for adding new DAMOS quota goals
of DAMOS_QUOTA_USER_INPUT metric, current_value fields of the new goals
should be also set as requested.
However, damos_commit_quota_goals() is not updating the field for the
case, since it is setting only metrics and target values using
damos_new_quota_goal(), and metric-optional union fields using
damos_commit_quota_goal_union(). As a result, users could see the first
current_value parameter that committed online with a new quota goal is
ignored. Users are assumed to commit the current_value for
DAMOS_QUOTA_USER_INPUT quota goals, since it is being used as a feedback.
Hence the real impact would be subtle. That said, this is obviously not
intended behavior.
Fix the issue by using damos_commit_quota_goal() which sets all quota goal
parameters, instead of damos_commit_quota_goal_union(), which sets only
the union fields.
Link: https://lkml.kernel.org/r/20251014001846.279282-1-sj@kernel.org Fixes: 1aef9df0ee90 ("mm/damon/core: commit damos_quota_goal->nid") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [6.16+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Enze Li [Tue, 14 Oct 2025 08:42:25 +0000 (16:42 +0800)]
mm/damon/core: fix potential memory leak by cleaning ops_filter in damon_destroy_scheme
Currently, damon_destroy_scheme() only cleans up the filter list but
leaves ops_filter untouched, which could lead to memory leaks when a
scheme is destroyed.
This patch ensures both filter and ops_filter are properly freed in
damon_destroy_scheme(), preventing potential memory leaks.
Link: https://lkml.kernel.org/r/20251014084225.313313-1-lienze@kylinos.cn Fixes: ab82e57981d0 ("mm/damon/core: introduce damos->ops_filters") Signed-off-by: Enze Li <lienze@kylinos.cn> Reviewed-by: SeongJae Park <sj@kernel.org> Tested-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
hugetlbfs: move lock assertions after early returns in huge_pmd_unshare()
When hugetlb_vmdelete_list() processes VMAs during truncate operations, it
may encounter VMAs where huge_pmd_unshare() is called without the required
shareable lock. This triggers an assertion failure in
hugetlb_vma_assert_locked().
The previous fix in commit dd83609b8898 ("hugetlbfs: skip VMAs without
shareable locks in hugetlb_vmdelete_list") skipped entire VMAs without
shareable locks to avoid the assertion. However, this prevented pages
from being unmapped and freed, causing a regression in
fallocate(PUNCH_HOLE) operations where pages were not freed immediately,
as reported by Mark Brown.
Instead of checking locks in the caller or skipping VMAs, move the lock
assertions in huge_pmd_unshare() to after the early return checks. The
assertions are only needed when actual PMD unsharing work will be
performed. If the function returns early because sz != PMD_SIZE or the
PMD is not shared, no locks are required and assertions should not fire.
This approach reverts the VMA skipping logic from commit dd83609b8898
("hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list")
while moving the assertions to avoid the assertion failure, keeping all
the logic within huge_pmd_unshare() itself and allowing page unmapping and
freeing to proceed for all VMAs.
Link: https://lkml.kernel.org/r/20251014113344.21194-1-kartikey406@gmail.com Fixes: dd83609b8898 ("hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list") Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com> Reported-by: <syzbot+f26d7c75c26ec19790e7@syzkaller.appspotmail.com> Reported-by: Mark Brown <broonie@kernel.org> Closes: https://syzkaller.appspot.com/bug?extid=f26d7c75c26ec19790e7 Suggested-by: David Hildenbrand <david@redhat.com> Suggested-by: Oscar Salvador <osalvador@suse.de> Tested-by: <syzbot+f26d7c75c26ec19790e7@syzkaller.appspotmail.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vmw_balloon: indicate success when effectively deflating during migration
When migrating a balloon page, we first deflate the old page to then
inflate the new page.
However, if inflating the new page succeeded, we effectively deflated the
old page, reducing the balloon size.
In that case, the migration actually worked: similar to migrating+
immediately deflating the new page. The old page will be freed back to
the buddy.
Right now, the core will leave the page be marked as isolated (as we
returned an error). When later trying to putback that page, we will run
into the WARN_ON_ONCE() in balloon_page_putback().
That handling was changed in commit 3544c4faccb8 ("mm/balloon_compaction:
stop using __ClearPageMovable()"); before that change, we would have
tolerated that way of handling it.
To fix it, let's just return 0 in that case, making the core effectively
just clear the "isolated" flag + freeing it back to the buddy as if the
migration succeeded. Note that the new page will also get freed when the
core puts the last reference.
Note that this also makes it all be more consistent: we will no longer
unisolate the page in the balloon driver while keeping it marked as being
isolated in migration core.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251014124455.478345-1-david@redhat.com Fixes: 3544c4faccb8 ("mm/balloon_compaction: stop using __ClearPageMovable()") Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com> Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SeongJae Park [Tue, 14 Oct 2025 20:59:36 +0000 (13:59 -0700)]
mm/damon/core: fix list_add_tail() call on damon_call()
Each damon_ctx maintains callback requests using a linked list
(damon_ctx->call_controls). When a new callback request is received via
damon_call(), the new request should be added to the list. However, the
function is making a mistake at list_add_tail() invocation: putting the
new item to add and the list head to add it before, in the opposite order.
Because of the linked list manipulation implementation, the new request
can still be reached from the context's list head. But the list items
that were added before the new request are dropped from the list.
As a result, the callbacks are unexpectedly not invocated. Worse yet, if
the dropped callback requests were dynamically allocated, the memory is
leaked. Actually DAMON sysfs interface is using a dynamically allocated
repeat-mode callback request for automatic essential stats update. And
because the online DAMON parameters commit is using a non-repeat-mode
callback request, the issue can easily be reproduced, like below.
# damo start --damos_action stat --refresh_stat 1s
# damo tune --damos_action stat --refresh_stat 1s
The first command dynamically allocates the repeat-mode callback request
for automatic essential stat update. Users can see the essential stats
are automatically updated for every second, using the sysfs interface.
The second command calls damon_commit() with a new callback request that
was made for the commit. As a result, the previously added repeat-mode
callback request is dropped from the list. The automatic stats refresh
stops working, and the memory for the repeat-mode callback request is
leaked. It can be confirmed using kmemleak.
Fix the mistake on the list_add_tail() call.
Link: https://lkml.kernel.org/r/20251014205939.1206-1-sj@kernel.org Fixes: 004ded6bee11 ("mm/damon: accept parallel damon_call() requests") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [6.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lorenzo Stoakes [Mon, 13 Oct 2025 16:58:36 +0000 (17:58 +0100)]
mm/mremap: correctly account old mapping after MREMAP_DONTUNMAP remap
Commit b714ccb02a76 ("mm/mremap: complete refactor of move_vma()")
mistakenly introduced a new behaviour - clearing the VM_ACCOUNT flag of
the old mapping when a mapping is mremap()'d with the MREMAP_DONTUNMAP
flag set.
While we always clear the VM_LOCKED and VM_LOCKONFAULT flags for the old
mapping (the page tables have been moved, so there is no data that could
possibly be locked in memory), there is no reason to touch any other VMA
flags.
This is because after the move the old mapping is in a state as if it were
freshly mapped. This implies that the attributes of the mapping ought to
remain the same, including whether or not the mapping is accounted.
Link: https://lkml.kernel.org/r/20251013165836.273113-1-lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Fixes: b714ccb02a76 ("mm/mremap: complete refactor of move_vma()") Reviewed-by: Pedro Falcato <pfalcato@suse.de> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Huang Ying [Wed, 15 Oct 2025 02:37:12 +0000 (10:37 +0800)]
arm64, mm: avoid always making PTE dirty in pte_mkwrite()
Current pte_mkwrite_novma() makes PTE dirty unconditionally. This may
mark some pages that are never written dirty wrongly. For example,
do_swap_page() may map the exclusive pages with writable and clean PTEs
if the VMA is writable and the page fault is for read access.
However, current pte_mkwrite_novma() implementation always dirties the
PTE. This may cause unnecessary disk writing if the pages are
never written before being reclaimed.
So, change pte_mkwrite_novma() to clear the PTE_RDONLY bit only if the
PTE_DIRTY bit is set to make it possible to make the PTE writable and
clean.
The current behavior was introduced in commit 73e86cb03cf2 ("arm64:
Move PTE_RDONLY bit handling out of set_pte_at()"). Before that,
pte_mkwrite() only sets the PTE_WRITE bit, while set_pte_at() only
clears the PTE_RDONLY bit if both the PTE_WRITE and the PTE_DIRTY bits
are set.
To test the performance impact of the patch, on an arm64 server
machine, run 16 redis-server processes on socket 1 and 16
memtier_benchmark processes on socket 0 with mostly get
transactions (that is, redis-server will mostly read memory only).
The memory footprint of redis-server is larger than the available
memory, so swap out/in will be triggered. Test results show that the
patch can avoid most swapping out because the pages are mostly clean.
And the benchmark throughput improves ~23.9% in the test.
Fixes: 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()") Signed-off-by: Huang Ying <ying.huang@linux.alibaba.com> Cc: Will Deacon <will@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Yicong Yang <yangyicong@hisilicon.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Aksh Garg [Thu, 16 Oct 2025 11:57:55 +0000 (17:27 +0530)]
net: ethernet: ti: am65-cpts: fix timestamp loss due to race conditions
Resolve race conditions in timestamp events list handling between TX
and RX paths causing missed timestamps.
The current implementation uses a single events list for both TX and RX
timestamps. The am65_cpts_find_ts() function acquires the lock,
splices all events (TX as well as RX events) to a temporary list,
and releases the lock. This function performs matching of timestamps
for TX packets only. Before it acquires the lock again to put the
non-TX events back to the main events list, a concurrent RX
processing thread could acquire the lock (as observed in practice),
find an empty events list, and fail to attach timestamp to it,
even though a relevant event exists in the spliced list which is yet to
be restored to the main list.
Fix this by creating separate events lists to handle TX and RX
timestamps independently.
Fixes: c459f606f66df ("net: ethernet: ti: am65-cpts: Enable RX HW timestamp for PTP packets using CPTS FIFO") Signed-off-by: Aksh Garg <a-garg7@ti.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://patch.msgid.link/20251016115755.1123646-1-a-garg7@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
gpio: pci-idio-16: Define maximum valid register address offset
Attempting to load the pci-idio-16 module fails during regmap
initialization with a return error -EINVAL. This is a result of the
regmap cache failing initialization. Set the idio_16_regmap_config
max_register member to fix this failure.
Fixes: 73d8f3efc5c2 ("gpio: pci-idio-16: Migrate to the regmap API") Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com> Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com Suggested-by: Mark Cave-Ayland <mark.caveayland@nutanix.com> Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <wbg@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-2-ebeb50e93c33@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpio: 104-idio-16: Define maximum valid register address offset
Attempting to load the 104-idio-16 module fails during regmap
initialization with a return error -EINVAL. This is a result of the
regmap cache failing initialization. Set the idio_16_regmap_config
max_register member to fix this failure.
Fixes: 2c210c9a34a3 ("gpio: 104-idio-16: Migrate to the regmap API") Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com> Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com Suggested-by: Mark Cave-Ayland <mark.caveayland@nutanix.com> Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <wbg@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-1-ebeb50e93c33@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With CONFIG_DEBUG_LOCK_ALLOC=y, the smc->clcsock is unexpectedly changed
in inet_init_csk_locks(). The INET_PROTOSW_ICSK flag is no need by smc,
just remove it.
After removing the INET_PROTOSW_ICSK flag, this patch alse revert
commit 6fd27ea183c2 ("net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC")
to avoid casting smc_sock to inet_connection_sock.
Reported-by: syzbot+f775be4458668f7d220e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f775be4458668f7d220e Tested-by: syzbot+f775be4458668f7d220e@syzkaller.appspotmail.com Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC") Signed-off-by: Wang Liang <wangliang74@huawei.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Link: https://patch.msgid.link/20251017024827.3137512-1-wangliang74@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amery Hung [Thu, 16 Oct 2025 19:55:40 +0000 (22:55 +0300)]
net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ
XDP programs can change the layout of an xdp_buff through
bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver
cannot assume the size of the linear data area nor fragments. Fix the
bug in mlx5 by generating skb according to xdp_buff after XDP programs
run.
Currently, when handling multi-buf XDP, the mlx5 driver assumes the
layout of an xdp_buff to be unchanged. That is, the linear data area
continues to be empty and fragments remain the same. This may cause
the driver to generate erroneous skb or triggering a kernel
warning. When an XDP program added linear data through
bpf_xdp_adjust_head(), the linear data will be ignored as
mlx5e_build_linear_skb() builds an skb without linear data and then
pull data from fragments to fill the linear data area. When an XDP
program has shrunk the non-linear data through bpf_xdp_adjust_tail(),
the delta passed to __pskb_pull_tail() may exceed the actual nonlinear
data size and trigger the BUG_ON in it.
To fix the issue, first record the original number of fragments. If the
number of fragments changes after the XDP program runs, rewind the end
fragment pointer by the difference and recalculate the truesize. Then,
build the skb with the linear data area matching the xdp_buff. Finally,
only pull data in if there is non-linear data and fill the linear part
up to 256 bytes.
Fixes: f52ac7028bec ("net/mlx5e: RX, Add XDP multi-buffer support in Striding RQ") Signed-off-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1760644540-899148-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amery Hung [Thu, 16 Oct 2025 19:55:39 +0000 (22:55 +0300)]
net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for legacy RQ
XDP programs can release xdp_buff fragments when calling
bpf_xdp_adjust_tail(). The driver currently assumes the number of
fragments to be unchanged and may generate skb with wrong truesize or
containing invalid frags. Fix the bug by generating skb according to
xdp_buff after the XDP program runs.
Fixes: ea5d49bdae8b ("net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ") Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Amery Hung <ameryhung@gmail.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1760644540-899148-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Fri, 17 Oct 2025 20:06:14 +0000 (16:06 -0400)]
selftests: net: fix server bind failure in sctp_vrf.sh
sctp_vrf.sh could fail:
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [FAIL]
not ok 1 selftests: net: sctp_vrf.sh # exit=3
The failure happens when the server bind in a new run conflicts with an
existing association from the previous run:
[1] ip netns exec $SERVER_NS ./sctp_hello server ...
[2] ip netns exec $CLIENT_NS ./sctp_hello client ...
[3] ip netns exec $SERVER_NS pkill sctp_hello ...
[4] ip netns exec $SERVER_NS ./sctp_hello server ...
It occurs if the client in [2] sends a message and closes immediately.
With the message unacked, no SHUTDOWN is sent. Killing the server in [3]
triggers a SHUTDOWN the client also ignores due to the unacked message,
leaving the old association alive. This causes the bind at [4] to fail
until the message is acked and the client responds to a second SHUTDOWN
after the server’s T2 timer expires (3s).
This patch fixes the issue by preventing the client from sending data.
Instead, the client blocks on recv() and waits for the server to close.
It also waits until both the server and the client sockets are fully
released in stop_server and wait_client before restarting.
Additionally, replace 2>&1 >/dev/null with -q in sysctl and grep, and
drop other redundant 2>&1 >/dev/null redirections, and fix a typo from
N to Y (connect successfully) in the description of the last test.
Sunil V L [Fri, 17 Oct 2025 10:07:44 +0000 (15:37 +0530)]
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
A refactoring bug introduced an argument order mistake in the call to
acpi_fwnode_get_reference_args() from __acpi_node_get_property_reference().
This caused incorrect behavior when resolving ACPI property references.
Fix the issue by correcting the argument order.
Fixes: e121be784d35 ("ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop") Reported-by: Thomas Richard <thomas.richard@bootlin.com> Closes: https://lore.kernel.org/all/1241f2b6-9b4e-4623-8a83-77db8774ac32@bootlin.com/ Tested-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20251017100744.71871-1-sunilvl@ventanamicro.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Mon, 20 Oct 2025 19:41:27 +0000 (09:41 -1000)]
Merge tag 'cgroup-for-6.18-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix seqcount lockdep assertion failure in cgroup freezer on
PREEMPT_RT.
Plain seqcount_t expects preemption disabled, but PREEMPT_RT
spinlocks don't disable preemption. Switch to seqcount_spinlock_t to
properly associate css_set_lock with the freeze timing seqcount.
- Misc changes including kernel-doc warning fix for misc_res_type enum
and improved selftest diagnostics.
* tag 'cgroup-for-6.18-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/misc: fix misc_res_type kernel-doc warning
selftests: cgroup: Use values_close_report in test_cpu
selftests: cgroup: add values_close_report helper
cgroup: Fix seqcount lockdep assertion in cgroup freezer
Linus Torvalds [Mon, 20 Oct 2025 19:35:13 +0000 (09:35 -1000)]
Merge tag 'fsnotify_for_v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
- Stop-gap solution for a race between unmount of a filesystem with
fsnotify marks and someone inspecting fdinfo of fsnotify group with
those marks in procfs.
A proper solution is in the works but it will get a while to settle.
- Fix for non-decodable file handles (used by unprivileged apps using
fanotify)
* tag 'fsnotify_for_v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs/notify: call exportfs_encode_fid with s_umount
expfs: Fix exportfs_can_encode_fh() for EXPORT_FH_FID
It is reported that commit 85975daeaa4d ("cpuidle: menu: Avoid discarding
useful information") led to a performance regression on Intel Jasper Lake
systems because it reduced the time spent by CPUs in idle state C7 which
is correlated to the maximum frequency the CPUs can get to because of an
average running power limit [1].
Before that commit, get_typical_interval() would have returned UINT_MAX
whenever it had been unable to make a high-confidence prediction which
had led to selecting the deepest available idle state too often and
both power and performance had been inadequate as a result of that on
some systems. However, this had not been a problem on systems with
relatively aggressive average running power limits, like the Jasper Lake
systems in question, because on those systems it was compensated by the
ability to run CPUs faster.
It was addressed by causing get_typical_interval() to return a number
based on the recent idle duration information available to it even if it
could not make a high-confidence prediction, but that clearly did not
take the possible correlation between idle power and available CPU
capacity into account.
For this reason, revert most of the changes made by commit 85975daeaa4d,
except for one cosmetic cleanup, and add a comment explaining the
rationale for returning UINT_MAX from get_typical_interval() when it
is unable to make a high-confidence prediction.
Fixes: 85975daeaa4d ("cpuidle: menu: Avoid discarding useful information") Closes: https://lore.kernel.org/linux-pm/36iykr223vmcfsoysexug6s274nq2oimcu55ybn6ww4il3g3cv@cohflgdbpnq7/ [1] Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/3663603.iIbC2pHGDl@rafael.j.wysocki
can: netlink: can_changelink(): allow disabling of automatic restart
Since the commit c1f3f9797c1f ("can: netlink: can_changelink(): fix NULL
pointer deref of struct can_priv::do_set_mode"), the automatic restart
delay can only be set for devices that implement the restart handler struct
can_priv::do_set_mode. As it makes no sense to configure a automatic
restart for devices that doesn't support it.
However, since systemd commit 13ce5d4632e3 ("network/can: properly handle
CAN.RestartSec=0") [1], systemd-networkd correctly handles a restart delay
of "0" (i.e. the restart is disabled). Which means that a disabled restart
is always configured in the kernel.
On systems with both changes active this causes that CAN interfaces that
don't implement a restart handler cannot be brought up by systemd-networkd.
Solve this problem by allowing a delay of "0" to be configured, even if the
device does not implement a restart handler.
Merge patch series "can: drivers: drop skb in xmit if device is in listen only mode"
Marc Kleine-Budde <mkl@pengutronix.de> says:
I notived that 3 drivers (bxcan, esd and rockchip) use the function
can_dropped_invalid_skb(), that doesn't check if the device is in listen
only mode. This series converts these driver to use the new
can_dev_dropped_skb() function.
can: rockchip-canfd: rkcanfd_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
In addition to can_dropped_invalid_skb(), the helper function
can_dev_dropped_skb() checks whether the device is in listen-only mode and
discards the skb accordingly.
Replace can_dropped_invalid_skb() by can_dev_dropped_skb() to also drop
skbs in for listen-only mode.
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Closes: https://lore.kernel.org/all/20251017-bizarre-enchanted-quokka-f3c704-mkl@pengutronix.de/ Fixes: ff60bfbaf67f ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller") Link: https://patch.msgid.link/20251017-fix-skb-drop-check-v1-3-556665793fa4@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: esd: acc_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
In addition to can_dropped_invalid_skb(), the helper function
can_dev_dropped_skb() checks whether the device is in listen-only mode and
discards the skb accordingly.
Replace can_dropped_invalid_skb() by can_dev_dropped_skb() to also drop
skbs in for listen-only mode.
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Closes: https://lore.kernel.org/all/20251017-bizarre-enchanted-quokka-f3c704-mkl@pengutronix.de/ Fixes: 9721866f07e1 ("can: esd: add support for esd GmbH PCIe/402 CAN interface family") Link: https://patch.msgid.link/20251017-fix-skb-drop-check-v1-2-556665793fa4@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can: bxcan: bxcan_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
In addition to can_dropped_invalid_skb(), the helper function
can_dev_dropped_skb() checks whether the device is in listen-only mode and
discards the skb accordingly.
Replace can_dropped_invalid_skb() by can_dev_dropped_skb() to also drop
skbs in for listen-only mode.
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Closes: https://lore.kernel.org/all/20251017-bizarre-enchanted-quokka-f3c704-mkl@pengutronix.de/ Fixes: f00647d8127b ("can: bxcan: add support for ST bxCAN controller") Link: https://patch.msgid.link/20251017-fix-skb-drop-check-v1-1-556665793fa4@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Nam Cao [Thu, 2 Oct 2025 08:23:17 +0000 (08:23 +0000)]
rv: Make rtapp/pagefault monitor depends on CONFIG_MMU
There is no page fault without MMU. Compiling the rtapp/pagefault monitor
without CONFIG_MMU fails as page fault tracepoints' definitions are not
available.
Make rtapp/pagefault monitor depends on CONFIG_MMU.
Fixes: 9162620eb604 ("rv: Add rtapp_pagefault monitor") Signed-off-by: Nam Cao <namcao@linutronix.de> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202509260455.6Z9Vkty4-lkp@intel.com/ Cc: stable@vger.kernel.org Reviewed-by: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/r/20251002082317.973839-1-namcao@linutronix.de Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Nam Cao [Thu, 2 Oct 2025 08:22:35 +0000 (08:22 +0000)]
rv: Fully convert enabled_monitors to use list_head as iterator
The callbacks in enabled_monitors_seq_ops are inconsistent. Some treat the
iterator as struct rv_monitor *, while others treat the iterator as struct
list_head *.
This causes a wrong type cast and crashes the system as reported by Nathan.
Convert everything to use struct list_head * as iterator. This also makes
enabled_monitors consistent with available_monitors.
Fixes: de090d1ccae1 ("rv: Fix wrong type cast in enabled_monitors_next()") Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/linux-trace-kernel/20250923002004.GA2836051@ax162/ Signed-off-by: Nam Cao <namcao@linutronix.de> Cc: stable@vger.kernel.org Reviewed-by: Gabriele Monaco <gmonaco@redhat.com> Link: https://lore.kernel.org/r/20251002082235.973099-1-namcao@linutronix.de Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Linus Torvalds [Sun, 19 Oct 2025 14:59:43 +0000 (04:59 -1000)]
Merge tag 'sched_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Make sure the check for lost pelt idle time is done unconditionally
to have correct lost idle time accounting
- Stop the deadline server task before a CPU goes offline
* tag 'sched_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix pelt lost idle time detection
sched/deadline: Stop dl_server before CPU goes offline
Linus Torvalds [Sun, 19 Oct 2025 14:54:08 +0000 (04:54 -1000)]
Merge tag 'perf_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure perf reporting works correctly in setups using
overlayfs or FUSE
- Move the uprobe optimization to a better location logically
* tag 'perf_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix MMAP2 event device with backing files
perf/core: Fix MMAP event path names with backing files
perf/core: Fix address filter match with backing files
uprobe: Move arch_uprobe_optimize right after handlers execution
Linus Torvalds [Sun, 19 Oct 2025 14:41:27 +0000 (04:41 -1000)]
Merge tag 'x86_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Reset the why-the-system-rebooted register on AMD to avoid stale bits
remaining from previous boots
- Add a missing barrier in the TLB flushing code to prevent erroneously
not flushing a TLB generation
- Make sure cpa_flush() does not overshoot when computing the end range
of a flush region
- Fix resctrl bandwidth counting on AMD systems when the amount of
monitoring groups created exceeds the number the hardware can track
* tag 'x86_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Prevent reset reasons from being retained across reboot
x86/mm: Fix SMP ordering in switch_mm_irqs_off()
x86/mm: Fix overflow in __cpa_addr()
x86/resctrl: Fix miscount of bandwidth event when reactivating previously unavailable RMID
Linus Torvalds [Sat, 18 Oct 2025 20:05:13 +0000 (10:05 -1000)]
Merge tag 'rust-rustfmt' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rustfmt fixes from Miguel Ojeda:
"Rust 'rustfmt' cleanup
'rustfmt', by default, formats imports in a way that is prone to
conflicts while merging and rebasing, since in some cases it condenses
several items into the same line.
Document in our guidelines that we will handle this for the moment
with the trailing empty comment workaround and make the tree
'rustfmt'-clean again"
* tag 'rust-rustfmt' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: bitmap: fix formatting
rust: cpufreq: fix formatting
rust: alloc: employ a trailing comment to keep vertical layout
docs: rust: add section on imports formatting
Linus Torvalds [Sat, 18 Oct 2025 18:38:28 +0000 (08:38 -1000)]
Merge tag 'tpmdd-next-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fix from Jarkko Sakkinen:
"Correct the state transitions for ARM FF-A to match the spec and how
tpm_crb behaves on other platforms"
* tag 'tpmdd-next-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb: Add idle support for the Arm FF-A start method
Linus Torvalds [Sat, 18 Oct 2025 18:35:09 +0000 (08:35 -1000)]
Merge tag 'pci-v6.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Search for MSI Capability with correct ID to fix an MSI regression on
platforms with Cadence IP (Hans Zhang)
- Revert early bridge resource set up to fix resource assignment
failures that broke at least alpha boot and Snapdragon ath12k WiFi
(Ilpo Järvinen)
- Implement VMD .irq_startup()/.irq_shutdown() to fix IRQ issues that
caused boot crashes and broken devices below VMD (Inochi Amaoto)
- Select CONFIG_SCREEN_INFO on X86 to fix black screen on boot when
SCREEN_INFO not selected (Mario Limonciello)
* tag 'pci-v6.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/VGA: Select SCREEN_INFO on X86
PCI: vmd: Override irq_startup()/irq_shutdown() in vmd_init_dev_msi_info()
PCI: Revert early bridge resource set up
PCI: cadence: Search for MSI Capability with correct ID
Linus Torvalds [Sat, 18 Oct 2025 18:22:07 +0000 (08:22 -1000)]
Merge tag 'cxl-fixes-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link fixes from Dave Jiang:
"A small collection of CXL fixes. In addition to some misc fixes for
the CXL subsystem, a number of fixes for CXL extended linear cache
support are included to make it functional again.
- Avoid missing port component registers setup due to dport
enumeration failure
- Add check for no entries in cxl_feature_info to address accessing
invalid pointer.
- Use %pa printk format to emit resource_size_t in
validate_region_offset()
CXL extended linear cache support fixes:
- Fix setup of memory resource in cxl_acpi_set_cache_size()
- Set range param for region_res_match_cxl_range() as const
(addresses a compile warning for match_region_by_range() fix)
- Fix match_region_by_range() to use region_res_match_cxl_range()
- Subtract to find an hpa_alias0 in cxl_poison events to correct the
alias math calculation"
* tag 'cxl-fixes-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/trace: Subtract to find an hpa_alias0 in cxl_poison events
cxl/region: Use %pa printk format to emit resource_size_t
cxl: Fix match_region_by_range() to use region_res_match_cxl_range()
cxl: Set range param for region_res_match_cxl_range() as const
cxl/acpi: Fix setup of memory resource in cxl_acpi_set_cache_size()
cxl/features: Add check for no entries in cxl_feature_info
cxl/port: Avoid missing port component registers setup
Linus Torvalds [Sat, 18 Oct 2025 18:00:43 +0000 (08:00 -1000)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Replace bpf_map_kmalloc_node() with kmalloc_nolock() to fix kmemleak
imbalance in tracking of bpf_async_cb structures (Alexei Starovoitov)
- Make selftests/bpf arg_parsing.c more robust to errors (Andrii
Nakryiko)
- Fix redefinition of 'off' as different kind of symbol when I40E
driver is builtin (Brahmajit Das)
- Do not disable preemption in bpf_test_run (Sahil Chandna)
- Fix memory leak in __lookup_instance error path (Shardul Bankar)
- Ensure test data is flushed to disk before reading it (Xing Guo)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix redefinition of 'off' as different kind of symbol
bpf: Do not disable preemption in bpf_test_run().
bpf: Fix memory leak in __lookup_instance error path
selftests: arg_parsing: Ensure data is flushed to disk before reading.
bpf: Replace bpf_map_kmalloc_node() with kmalloc_nolock() to allocate bpf_async_cb structures.
selftests/bpf: make arg_parsing.c more robust to crashes
bpf: test_run: Fix ctx leak in bpf_prog_test_run_xdp error path
Linus Torvalds [Sat, 18 Oct 2025 17:23:59 +0000 (07:23 -1000)]
Merge tag 'exfat-for-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix out-of-bounds in FS_IOC_SETFSLABEL
- Add validation for stream entry size to prevent infinite loop
* tag 'exfat-for-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix out-of-bounds in exfat_nls_to_ucs2()
exfat: fix improper check of dentry.stream.valid_size
Linus Torvalds [Sat, 18 Oct 2025 17:18:48 +0000 (07:18 -1000)]
Merge tag 'nfs-for-6.18-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Fix for FlexFiles mirror->dss allocation
- Apply delay_retrans to async operations
- Check if suid/sgid is cleared after a write when needed
- Fix setting the state renewal timer for early mounts after a reboot
* tag 'nfs-for-6.18-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS4: Fix state renewals missing after boot
NFS: check if suid/sgid was cleared after a write as needed
NFS4: Apply delay_retrans to async operations
NFSv4/flexfiles: fix to allocate mirror->dss before use
projects / thirdparty / kernel / linux.git / log
