Use an accessor function for general_symbol_info::language
Also renames the member variable to m_language to make code easier to read
when more functions become member functions.
I was originally hoping to eventually make m_language private (after a few
more patches), but unfortunately then it no longer counts as a POD type,
which means gdbsupport/poison.h won't let us use memset to initialize
this type, which psymtabs rely on to clear padding bytes so that bcache
can work properly.
gdb/ChangeLog:
2019-12-15 Christian Biesinger <cbiesinger@google.com>
Anthony Green [Sat, 14 Dec 2019 10:23:20 +0000 (05:23 -0500)]
Add unlink support to moxie simulator
This change adds support for the unlink system call, which is
required by the GCC testsuite. It also switches read/write/open
system calls to use the sim_io_* functions.
2019-12-14 Anthony Green <green@moxielogic.com>
* interp.c (sim_engine_run): Make use of sim_io_* functions for
read/write/open system calls. Implement the unlink system call.
This bug has been reported against Fedora GDB, but there's also an
upstream bug. The problem reported is that GDB segfaults when the
working directory is deleted. It's pretty use to reproduce it:
mkdir bla
cd bla
rmdir ../bla
gdb echo
Debugging the problem is a bit tricky, because, since the current
directory doesn't exist anymore, a corefile cannot be saved there.
After a few attempts, I came up with the following:
So I fixed the problem with the patch below. The idea is that, if
'current_directory' is NULL, then the final string returned should be
just the "path".
After fixing the bug, I found a similar one reported against our
bugzilla: PR gdb/23613. The problem is the same, but the reproducer
is a bit different.
I really tried writing a testcase for this, but unfortunately it's
apparently not possible to start GDB inside a non-existent directory
with DejaGNU.
I regression tested this patch on the BuildBot, and no regressions
were found.
https://bugzilla.redhat.com/show_bug.cgi?id=1728147
PR gdb/23613
* bsd-kvm.c (bsd_kvm_target_open): Use 'gdb_abspath'.
* corelow.c: Include 'gdbsupport/pathstuff.h'.
(core_target_open): Use 'gdb_abspath'.
* gdbsupport/pathstuff.c (gdb_abspath): Guard against
'current_directory == NULL' case.
* gdbsupport/pathstuff.h (gdb_abspath): Expand comment and
explain what happens when 'current_directory' is NULL.
* go32-nat.c (go32_nat_target::wait): Check if
'current_directory' is NULL before call to 'chdir'.
* source.c (add_path): Use 'gdb_abspath'.
* top.c: Include 'gdbsupport/pathstuff.h'.
(init_history): Use 'gdb_abspath'.
(set_history_filename): Likewise.
* tracefile-tfile.c: Include 'gdbsupport/pathstuff.h'.
(tfile_target_open): Use 'gdb_abspath'.
As agreed on the mailing list, now that GDB 9 has branched, this patch
reverts the change to set worker-threads to zero. After this patch,
multithreaded minsym demangling will be enabled again by default.
gdb/ChangeLog:
2019-12-13 Christian Biesinger <cbiesinger@google.com>
* maint.c (n_worker_threads): Default to -1.
(worker_threads_disabled): Remove function.
* maint.h (worker_threads_disabled): Remove function.
* minsyms.c (minimal_symbol_reader::record_full): Don't call
symbol_set_names here if worker_threads_disabled () is true.
Tom Tromey [Thu, 12 Dec 2019 17:40:08 +0000 (10:40 -0700)]
Remove ARI check for multiple calls to warning or error
ARI has a check for multiple calls to warning or error, suggesting
that they be combined into a single call. This triggers at three
places in gdb -- throw_bad_regnum_error, guile_repl_command, and the
end of value_cast -- and after examining these, I think they all make
sense as-is. Instead, it makes sense to remove this check from ARI.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove check for multiple calls to
warning or error.
Tom Tromey [Thu, 5 Dec 2019 15:11:31 +0000 (08:11 -0700)]
Silence ARI warning about floatformat_to_double
This silences ARI at the one spot that is permitted to call
floatformat_to_double, and also removes the corresponding "fix" call
from gdb_ari.sh -- it was incorrect, and now is not needed.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove "fix" call for
floatformat_to_double.
* target-float.c (host_float_ops<T>::from_target): Add ARI
comment.
Tom Tromey [Thu, 5 Dec 2019 15:08:39 +0000 (08:08 -0700)]
Silence ARI for valid calls to abort
There are a handful of spots in gdb that validly call abort. This
patch adds the appropriate ARI marker to these lines, to silence the
ARI report. This also removes the "fix" call for "abort" from
gdb_ari.sh; it was incorrect and now is not needed.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove "fix" call for abort.
* utils.c (abort_with_message, dump_core, internal_vproblem): Add
ARI marker to abort.
* event-top.c (handle_sigsegv): Add ARI marker to abort.
Tom Tromey [Thu, 5 Dec 2019 14:58:03 +0000 (07:58 -0700)]
Remove ATTRIBUTE_UNUSED check from ARI
The text for the ATTRIBUTE_UNUSED check in ARI is plainly incorrect
now -- gdb does in fact use ATTRIBUTE_UNUSED, and there's no issue in
doing so, when done properly.
This patch removes this check.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
Tom Tromey [Thu, 5 Dec 2019 14:53:32 +0000 (07:53 -0700)]
Remove "boolean" and "var_boolean" checks from ARI
The "boolean" and "var_boolean" checks from ARI seem only to generate
false reports.
Now that gdb is in C++, at least the "boolean" check seems unlikely to
ever generate a true report.
The "var_boolean" check likewise doesn't seem valuable any more --
presumably this refers to some ancient way of doing things in gdb, and
isn't likely to find a bug in the future.
Therefore, this patch removes these two checks.
gdb/ChangeLog
2019-12-13 Tom Tromey <tromey@adacore.com>
* contrib/ari/gdb_ari.sh: Remove "boolean" and "var_boolean"
checks.
Alan Modra [Fri, 13 Dec 2019 05:44:57 +0000 (16:14 +1030)]
Set no file contents PT_LOAD p_offset to first page
PR 25237
* elf.c (assign_file_positions_for_load_sections): Attempt to
keep meaningless p_offset for PT_LOAD segments without file
contents within file size.
Tom Tromey [Sun, 3 Nov 2019 22:22:01 +0000 (15:22 -0700)]
Change objfile::partial_symtabs to be a unique_ptr
A plan I had a while ago was to write the DWARF index in a worker
thread. This is why objfile::partial_symtabs is a shared_ptr.
However, it turned out that doing this required keeping the objfile
alive as well. Now that objfiles are managed using shared_ptr,
there's no need for partial_symtabs to be one as well, so this patch
reverts that change.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* objfiles.h (struct objfile) <partial_symtabs>: Now a
unique_ptr.
Tom Tromey [Sun, 3 Nov 2019 21:47:55 +0000 (14:47 -0700)]
Manage objfiles with shared_ptr
This changes objfiles to be managed using a shared_ptr. shared_ptr is
chosen because it enables the use of objfiles in background threads.
The simplest way to do this was to introduce a new iterator that will
return the underlying objfile, rather than a shared_ptr. (I also
tried changing the rest of gdb to use shared_ptr, but this was quite
large; and to using intrusive reference counting, but this also was
tricky.)
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.h (objfile_list): New typedef.
(class unwrapping_objfile_iterator)
(struct unwrapping_objfile_range): Newl
(struct program_space) <objfiles_range>: Change type.
<objfiles>: Change return type.
<add_objfile>: Change type of "objfile" parameter.
<objfiles_list>: Now a list of shared_ptr.
* progspace.c (program_space::add_objfile): Change type of
"objfile". Update.
(program_space::remove_objfile): Update.
* objfiles.h (struct objfile) <~objfile>: Make public.
* objfiles.c (objfile::make): Update.
(objfile::unlink): Don't call delete.
Tom Tromey [Fri, 1 Nov 2019 22:42:29 +0000 (16:42 -0600)]
Introduce program_space::remove_objfile
This introduces a new method, program_space::remove_objfile, and
changes the objfile destructor not to unlink an objfile from the
program space's list.
This is cleaner because, like the previous patch, it treats the
program space more like a container for objfiles. Also, this makes it
possible to keep an objfile alive even though it has been unlinked
from the program space's list, which is important for processing in a
worker thread.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
Tom Tromey [Fri, 1 Nov 2019 22:31:28 +0000 (16:31 -0600)]
Introduce program_space::add_objfile
This introduces a new method, program_space::add_objfile, that adds an
objfile to the program space's list of objfiles. It also changes the
obfile's constructor so that linking an objfile into this list is not
done here.
The former is an improvement because it makes more sense to treat the
program space as a container holding objfiles -- so manipulation of
the list belongs there.
The latter is not strictly needed, but seemed better both because it
is removing a global side effect from a constructor, and for symmetry
reasons, as a subsequent patch will remove unlinking from the
destructor.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* progspace.h (struct program_space) <add_objfile>: Declare
method.
* progspace.c (program_space::add_objfile): New method.
* objfiles.c (~objfile): Don't unlink objfile.
(put_objfile_before): Remove.
(add_separate_debug_objfile): Don't call put_objfile_before.
(objfile::make): Call add_objfile. Set new_objfiles_available on
the per-program-space data.
Tom Tromey [Fri, 1 Nov 2019 22:21:04 +0000 (16:21 -0600)]
Make the objfile destructor private
The idea behind this is that, in the long run, some code will need to
be able to hold onto an objfile after it is unlinked from the program
space. In particular, this is needed for some functionality to be
moved to worker threads -- otherwise the objfile can be deleted while
still in use.
So, this makes ~objfile private, replacing it with an "unlink" method,
making it more obvious which operation is intended at the calling
points.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (syms_from_objfile_1): Use objfile_up.
(syms_from_objfile_1, remove_symbol_file_command): Call unlink
method.
(reread_symbols): Use objfile_up.
* solib.c (update_solib_list, reload_shared_libraries_1): Call
unlink method.
* objfiles.h (struct objfile) <~objfile>: Now private.
<unlink>: New method.
(struct objfile_deleter): New.
(objfile_up): New typedef.
* objfiles.c (objfile::unlink): New method.
(free_objfile_separate_debug, free_all_objfiles)
(objfile_purge_solibs): Use it.
* jit.c (jit_unregister_code): Remove.
(jit_inferior_exit_hook, jit_event_handler): Call unlink on
objfile.
* compile/compile-object-run.c (do_module_cleanup): Call unlink on
objfile.
* compile/compile-object-load.c (compile_object_load): Use
objfile_up.
Tom Tromey [Fri, 1 Nov 2019 22:06:37 +0000 (16:06 -0600)]
Make the objfile constructor private
This changes the objfile constructor to be private, changing the
callers to use a factory method. This isn't perhaps strictly needed
for the goal of this series -- changing the container model of
objfiles -- but is a nice symmetry.
gdb/ChangeLog
2019-12-12 Tom Tromey <tom@tromey.com>
* symfile.c (symbol_file_add_with_addrs): Use objfile::make.
* objfiles.h (struct objfile): Make constructor private.
<make>: New static method.
* jit.c (jit_object_close_impl): Update.
H.J. Lu [Thu, 12 Dec 2019 19:56:06 +0000 (11:56 -0800)]
i386: Align branches within a fixed boundary
Add 3 command-line options to align branches within a fixed boundary
with segment prefixes or NOPs:
1. -malign-branch-boundary=NUM aligns branches within NUM byte boundary.
2. -malign-branch=TYPE[+TYPE...] specifies types of branches to align.
The supported branches are:
a. Conditional jump.
b. Fused conditional jump.
c. Unconditional jump.
d. Call.
e. Ret.
f. Indirect jump and call.
3. -malign-branch-prefix-size=NUM aligns branches with NUM segment
prefixes per instruction.
3 new rs_machine_dependent frag types are added:
1. BRANCH_PADDING. The variable size frag to insert NOP before branch.
2. BRANCH_PREFIX. The variable size frag to insert segment prefixes to
an instruction. The choices of prefixes are:
a. Use the existing segment prefix if there is one.
b. Use CS segment prefix in 64-bit mode.
c. In 32-bit mode, use SS segment prefix with ESP/EBP base register
and use DS segment prefix without ESP/EBP base register.
3. FUSED_JCC_PADDING. The variable size frag to insert NOP before fused
conditional jump.
The new rs_machine_dependent frags aren't inserted if the previous item
is a prefix or a constant directive, which may be used to hardcode an
instruction, since there is no clear instruction boundary. Segment
prefixes and NOP padding are disabled before relaxable TLS relocations
and tls_get_addr calls to keep TLS instruction sequence unchanged.
md_estimate_size_before_relax() and i386_generic_table_relax_frag() are
used to handled BRANCH_PADDING, BRANCH_PREFIX and FUSED_JCC_PADDING frags.
i386_generic_table_relax_frag() grows or shrinks sizes of segment prefix
and NOP to align the next branch frag:
1. First try to add segment prefixes to instructions before a branch.
2. If there is no sufficient room to add segment prefixes, NOP will be
inserted before a branch.
* config/tc-i386.c (_i386_insn): Add has_gotpc_tls_reloc.
(tls_get_addr): New.
(last_insn): New.
(align_branch_power): New.
(align_branch_kind): New.
(align_branch_bit): New.
(align_branch): New.
(MAX_FUSED_JCC_PADDING_SIZE): New.
(align_branch_prefix_size): New.
(BRANCH_PADDING): New.
(BRANCH_PREFIX): New.
(FUSED_JCC_PADDING): New.
(i386_generate_nops): Support BRANCH_PADDING and FUSED_JCC_PADDING.
(md_begin): Abort if align_branch_prefix_size <
MAX_FUSED_JCC_PADDING_SIZE.
(md_assemble): Set last_insn.
(maybe_fused_with_jcc_p): New.
(add_fused_jcc_padding_frag_p): New.
(add_branch_prefix_frag_p): New.
(add_branch_padding_frag_p): New.
(output_insn): Generate a BRANCH_PADDING, FUSED_JCC_PADDING or
BRANCH_PREFIX frag and terminate each frag to align branches.
(output_disp): Set i.has_gotpc_tls_reloc to TRUE for GOTPC and
relaxable TLS relocations.
(output_imm): Likewise.
(i386_next_non_empty_frag): New.
(i386_next_jcc_frag): New.
(i386_classify_machine_dependent_frag): New.
(i386_branch_padding_size): New.
(i386_generic_table_relax_frag): New.
(md_estimate_size_before_relax): Handle COND_JUMP_PADDING,
FUSED_JCC_PADDING and COND_JUMP_PREFIX frags.
(md_convert_frag): Handle BRANCH_PADDING, BRANCH_PREFIX and
FUSED_JCC_PADDING frags.
(OPTION_MALIGN_BRANCH_BOUNDARY): New.
(OPTION_MALIGN_BRANCH_PREFIX_SIZE): New.
(OPTION_MALIGN_BRANCH): New.
(md_longopts): Add -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(md_parse_option): Handle -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(md_show_usage): Display -malign-branch-boundary=,
-malign-branch-prefix-size= and -malign-branch=.
(i386_target_format): Set tls_get_addr.
(i386_cons_align): New.
* config/tc-i386.h (i386_cons_align): New.
(md_cons_align): New.
(i386_generic_table_relax_frag): New.
(md_generic_table_relax_frag): New.
(i386_tc_frag_data): Add u, padding_address, length,
max_prefix_length, prefix_length, default_prefix, cmp_size,
classified and branch_type.
(TC_FRAG_INIT): Initialize u, padding_address, length,
max_prefix_length, prefix_length, default_prefix, cmp_size,
classified and branch_type.
* doc/c-i386.texi: Document -malign-branch-boundary=,
-malign-branch= and -malign-branch-prefix-size=.
H.J. Lu [Thu, 12 Dec 2019 19:54:31 +0000 (11:54 -0800)]
gas: Add md_generic_table_relax_frag
Add md_generic_table_relax_frag for TC_GENERIC_RELAX_TABLE targets so
that a backend can extend relax_frag beyond TC_GENERIC_RELAX_TABLE.
* write.c (md_generic_table_relax_frag): New. Defined to
relax_frag if not defined.
(relax_segment): Call md_generic_table_relax_frag instead of
relax_frag.
Tom Tromey [Thu, 12 Dec 2019 13:09:40 +0000 (06:09 -0700)]
Fix the thread-pool.c compilation
A recent commit removed DIAGNOSTIC_IGNORE_UNUSED_FUNCTION, which was
used in thread-pool.c. This patch changes this code to use
ATTRIBUTE_UNUSED instead.
Tested by rebuilding.
gdb/ChangeLog
2019-12-12 Tom Tromey <tromey@adacore.com>
* gdbsupport/thread-pool.c (set_thread_name): Use
ATTRIBUTE_UNUSED.
Luis Machado [Wed, 11 Dec 2019 14:55:49 +0000 (11:55 -0300)]
Fix unused function error
Attempting to build GDB in Ubuntu 16.04.6 LTS on x86_64, I ran into warnings
that caused the build to fail:
binutils-gdb/gdb/gdbsupport/safe-strerror.c:44:1: error: ‘char* select_strerror_r(char*, char*)’ defined but not used [-Werror=unused-function] select_strerror_r (char *res, char *)
The diagnostic macro DIAGNOSTIC_IGNORE_UNUSED_FUNCTION seems to expand
correctly to its respective pragma, but this doesn't seem to have an effect on
the warning. I tried to use the pragma explicitly and got the same result.
ATTRIBUTE_UNUSED works fine in this case if you put it in both functions,
which should fix warnings for both gdb and gdbserver builds.
The compiler version is gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609.
To prevent other developers from attempting to use this macro, only to get
confused by it not working as expected, it seems better to not define this
particular macro.
gdb/ChangeLog:
2019-12-12 Luis Machado <luis.machado@linaro.org>
* gdbsupport/safe-strerror.c: Don't include diagnostics.h.
(select_strerror_r): Use ATTRIBUTE_UNUSED instead of the diagnostics
macros.
Alan Modra [Thu, 12 Dec 2019 06:17:21 +0000 (16:47 +1030)]
obj-evax.c tidy
This started out as fixing decode_16, which used a char to index a 256
byte decodings array. When char is signed that could result in an out
of bounds array access. The rest of the patch is for consistency and
just general cleanup.
* config/obj-evax.c (crc32, encode_32, encode_16, decode_16):
Remove unnecessary prototypes.
(number_of_codings): Delete, use ARRAY_SIZE instead throughout.
(codings, decodings): Make arrays of unsigned char.
(crc32): Use unsigned variables. Delete unnecessary mask.
(encode_32, encode_16): Return unsigned char*, and make static
buffer an unsigned char array.
(decode_16): Make arg an unsigned char*. Remove useless casts.
(shorten_identifier): Use unsigned char crc_chars.
(is_truncated_identifier): Make ptr an unsigned char*.
Tom Tromey [Thu, 12 Dec 2019 02:17:47 +0000 (19:17 -0700)]
Fix TUI test suite regexps
Testing on another TUI series showed that some of the regexps in the
TUI test suite have been incorrect for a while. In particular, "|"
was meant literally in these tests, but was interpreted as pattern
alternation due to lack of quoting.
This patch fixes the bad tests. I am checking this in.
gdb/testsuite/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
Tom Tromey [Sat, 26 Oct 2019 22:37:32 +0000 (16:37 -0600)]
Change "winheight" resizing to use new layout code
The "winheight" command resizes a specified window, resizing the other
windows in the layout to adapt. In the current code, this is done by
examining each possible layout separately. The new layout code has a
more general approach to handling this, and this patch simply removes
the old code in favor of a call into the new layout engine.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
Tom Tromey [Thu, 10 Oct 2019 03:18:31 +0000 (21:18 -0600)]
Re-apply the current layout when resizing
The TUI has separate code for each possible layout to handle the case
where the terminal window is resized. With the new layout code, this
can all be replaced with a call to tui_apply_current_layout, which
simply re-applies the current layout.
This results in some small differences in behavior when resizing, so
some tests are updated.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
Tom Tromey [Tue, 8 Oct 2019 00:03:02 +0000 (18:03 -0600)]
Introduce new layout code
This introduces a new approach to window layout for the TUI. The idea
behind this code is that a layout should be specified in a declarative
way, and then be applied by generic code that does not need to know
the specifics of every possible layout.
This patch itself does not change any behavior, because the new layout
engine isn't yet connected to anything. That is, this merely
introduces the implementation.
This generic approach makes the code more maintainable. It also
enables some future changes:
* New window types are simpler to add;
* User-specified layouts are possible; and
* Horizontal layouts are more attainable
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-layout.h (class tui_layout_base)
(class tui_layout_window, class tui_layout_split): New.
* tui/tui-layout.c (tui_get_window_by_name)
(tui_layout_window::clone, tui_layout_window::apply)
(tui_layout_window::get_sizes, tui_layout_window::add_split)
(tui_layout_split::add_window, tui_layout_split::clone)
(tui_layout_split::get_sizes)
(tui_layout_split::set_weights_from_heights)
(tui_layout_split::adjust_size, tui_layout_split::apply): New
functions.
(tui_layout_split::add_split, tui_layout_split::add_split)
(tui_layout_split::set_weights_from_heights)
(tui_layout_split::set_weights_from_heights): New functions.
Tom Tromey [Sat, 26 Oct 2019 22:00:01 +0000 (16:00 -0600)]
Remove struct tui_point
struct tui_point does not help very much. It is only used for
storage, and never passed between functions. I think it makes the
code more verbose without any corresponding benefit, so this patch
removes it.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
Tom Tromey [Mon, 7 Oct 2019 23:36:49 +0000 (17:36 -0600)]
Introduce the tui_gen_win_info::min_height method
This introduces a new method, tui_gen_win_info::min_height, to fetch
the minimum height of a window. This is used in the subsequent
unified layout patch.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
Tom Tromey [Wed, 6 Nov 2019 00:12:04 +0000 (17:12 -0700)]
Move can_box to tui_gen_win_info
This moves the can_box method to tui_gen_win_info, so that it will be
available on the tui_locator_window class. This will be used in a
subsequent patch.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
Tom Tromey [Mon, 7 Oct 2019 22:59:02 +0000 (16:59 -0600)]
Move max_height method to tui_gen_win_info
This moves the max_height method to tui_gen_win_info and implements it
in the subclasses. This is used by a subsequent patch, which will
normalize window layout across all window types.
gdb/ChangeLog
2019-12-11 Tom Tromey <tom@tromey.com>
* tui/tui-stack.h (struct tui_locator_window) <max_height>: New
method.
* tui/tui-regs.h (struct tui_data_item_window) <max_height>: New
method.
* tui/tui-data.h (struct tui_gen_win_info) <max_height>: New
method.
(struct tui_win_info) <max_height>: Now override.
Tom Tromey [Tue, 10 Dec 2019 21:16:19 +0000 (14:16 -0700)]
Fix build on macOS
PR build/25268 points out that the build fails on macOS, because on
macOS the "pthread_setname_np" function takes a single argument.
This patch fixes the problem, by introducing a new adapter function
that handles both styles of pthread_setname_np.
This change also meant moving the pthread_setname_np call to the
thread function, because macOS only permits setting the name of the
current thread. This means that there can be a brief window when gdb
will see the wrong name; but I think this is a minor concern.
Tested by rebuilding on x86-64 Fedora 30, and on macOS High Sierra.
On Linux I also debugged gdb to ensure that the thread names are still
set correctly.
gdb/ChangeLog
2019-12-11 Tom Tromey <tromey@adacore.com>
Tom Tromey [Wed, 11 Dec 2019 14:58:46 +0000 (07:58 -0700)]
Fix the build after bfd_get_signed_8 change
A recent commit changed bfd_get_signed_8 to extend the result to a
bfd_signed_vma. This caused a compiler error in one spot in my
--enable-targets=all gdb build, where the result of bfd_get_signed_8
was passed to printf.
This patch fixes the build. Tested by rebuilding.
gdb/ChangeLog
2019-12-11 Tom Tromey <tromey@adacore.com>
* fbsd-tdep.c (fbsd_core_info_proc_status): Cast result of
bfd_get_signed_8.
Jan Beulich [Wed, 11 Dec 2019 08:42:29 +0000 (09:42 +0100)]
x86: further refine SSE check (SSE4a, SHA, GFNI)
In ("x86: extend SSE check to PCLMULQDQ, AES, and GFNI insns") I went
both a little too far and not quite far enough:
- GFNI insns also have AVX512 variants, which also shouldn't get
diagnosed,
- SSE4a insns should get diagnosed just like SSE4.x ones,
- SHA insns should get diagnosed just like PCLMULQDQ or AES ones.
Implement 'print -raw-values' and 'set print raw-values on|off'
The option framework documentation was speaking about a 'print -raw'
option, but this option does not exist.
This patch implements -raw-values option that tells to ignore the
active pretty printers when printing a value.
As we already have -raw-frame-arguments, I thought -raw-values
was more clear, in particular to differentiate
set print raw-values and set print raw-frame-arguments.
gdb/doc/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.texinfo (Command Options): Use -p and -pretty in the example,
as -r is ambiguous. Update the print - TAB TAB completion result.
(Data): Document new option -raw-values. Use -p and -pretty in the
example, as -r is ambiguous.
(Print Settings): Document set print raw values.
(Pretty-Printer Commands): Document interaction between enabled
pretty printers and -raw-values/-raw-frame-arguments.
gdb/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Document -raw-values option and the related setting commands.
* printcmd.c (print_command_parse_format): Do not set opts->raw off,
only set it on when /r is given.
* valprint.c (value_print_option_defs): New element raw-values.
* Makefile.in: Add the new file.
gdb/testsuite/ChangeLog
2019-12-11 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* gdb.base/options.exp: Add -raw-values in the print completion list.
* gdb.python/py-prettyprint.exp: Add tests for -raw-values.
Alan Modra [Tue, 10 Dec 2019 12:52:10 +0000 (23:22 +1030)]
ubsan: cris: signed integer overflow
This was the following in print_with_operands
case 4:
number
= buffer[2] + buffer[3] * 256 + buffer[4] * 65536
+ buffer[5] * 0x1000000;
and buffer[5] * 0x1000000 can indeed overflow. So to fix this we need
to use unsigned arithmetic where overflow semantics are specified.
But number is a long, and the expression is int which will be sign
extended to long. If we make the expression unsigned it will be zero
extended. So make number an int32_t and rearrange a little for some
of the places that need fixing.
* cris-dis.c (print_with_operands): Avoid signed integer
overflow when collecting bytes of a 32-bit integer.
Alan Modra [Tue, 10 Dec 2019 12:32:37 +0000 (23:02 +1030)]
ubsan: cr16: left shift cannot be represented in type 'int'
This was:
unsigned long mask = SBM (instruction->match_bits);
with
#define SBM(offs) ((((1 << (32 - offs)) -1) << (offs)))
Well, there are a couple of problems. Firstly, the expression uses
int values (1 rather than 1u or 1ul) resulting in the ubsan error, and
secondly, a zero offs will result in a 32-bit shift which is undefined
if ints are only 32 bits.
Alan Modra [Tue, 10 Dec 2019 12:02:06 +0000 (22:32 +1030)]
ubsan: bfin: shift exponent is too large
This was the following in fmtconst_val, x is unsigned int.
x = SIGNEXTEND (x, constant_formats[cf].nbits);
Problem is, the SIGNEXTEND macro assumed its arg was a long and sign
extended by shifting left then shifting right, and didn't cast the
arg. So don't do the silly shift thing. It's not guaranteed to work
anyway according to the C standard. ">>" might do a logical shift
even if its args are signed.
* bfin-dis.c (HOST_LONG_WORD_SIZE, XFIELD): Delete.
(SIGNBIT): New.
(MASKBITS, SIGNEXTEND): Rewrite.
(fmtconst): Don't use ? expression now that SIGNEXTEND uses
unsigned arithmetic, instead assign result of SIGNEXTEND back
to x.
(fmtconst_val): Use 1u in shift expression.
Alan Modra [Tue, 10 Dec 2019 07:42:28 +0000 (18:12 +1030)]
ubsan: xtensa: left shift cannot be represented in type 'int'
In Operand_soffsetx4_decode:
soffsetx4_0 = 0x4 + ((((int) offset_0 << 14) >> 14) << 2);
and other places.
Don't sign extend with shifts! This file also has many occurrences of
truncation via shifts, which aren't a problem due to using uint32, but
I dislike on principle enough to fix.
* xtensa-modules.c (Field_* functions): Don't mask using shifts.
(Operand_soffsetx4_decode, Operand_simm4_decode),
(Operand_simm8_decode, Operand_simm8x256_decode),
(Operand_simm12b_decode, Operand_label8_decode),
(Operand_label12_decode, Operand_soffset_decode),
(Operand_xt_wbr15_label_decode, Operand_xt_wbr18_label_decode): Don't
sign extend using shifts.
(Operand_immrx4_decode, Operand_uimm16x4_decode): Avoid UB in
constant.
Alan Modra [Tue, 10 Dec 2019 07:36:09 +0000 (18:06 +1030)]
ubsan: epiphany: left shift of negative value
Two places in epiphany_cgen_extract_operand, "value" is a long.
value = ((((value) << (1))) + (pc));
cpu/
* epiphany.cpu (f-simm8, f-simm24): Use multiply rather than
shift left to avoid UB on left shift of negative values.
opcodes/
* epiphany-ibld.c: Regenerate.
Tom Tromey [Wed, 20 Nov 2019 23:07:46 +0000 (16:07 -0700)]
Minor fix to gdb.prompt documentation
I noticed that an example in the gdb.prompt documentation used the
wrong kind of quotes -- because it is code, it should use a plain
ASCII quotation mark. I also slightly shortened the sample text here,
so it would more clearly fit on a single line.
gdb/doc/ChangeLog
2019-12-10 Tom Tromey <tom@tromey.com>
* python.texi (gdb.prompt): Use correct quotes in example.
Shorten sample text.
Kevin Buettner [Wed, 20 Sep 2017 22:40:14 +0000 (15:40 -0700)]
OpenMP parallel region scope tests
Add tests which check for accessibility of variables from within
various OpenMP parallel regions.
Tested on Fedora 27, 28, 29, 30, and 31. I also tested with my OpenMP
work on Fedora 30. The test has been annotated with setup_xfail and
setup_kfail statements so that there are no unexpected failures on any
of these platforms when using gcc. Better still, for my own testing
anyway, is that there are also no XPASSes or KPASSes either. So,
regardless of platform, when using gcc, and regardless of whether my
(not yet public) OpenMP work is used, seeing a FAIL indicates a real
problem.
Fedora 27 results:
# of expected passes 85
# of expected failures 65
(Note: I have not retested F27 since v1 of the patch; it's possible
that the numbers will be slightly different for v2.)
Fedora 28, 29, 30 results:
# of expected passes 131
# of expected failures 4
# of known failures 16
Fedora 30, 31 results w/ my OpenMP work:
# of expected passes 151
The above results all use gcc, either the system gcc or a development
gcc (when testing against my OpenMP work in GDB). I've also tested
with clang 9.0.0 and icc 19.0.5.281 20190815 on Fedora 31.
Fedora 31, clang:
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print s3
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print i1
FAIL: gdb.threads/omp-par-scope.exp: single_scope: first thread: print i3
FAIL: gdb.threads/omp-par-scope.exp: single_scope: second thread: print s1
FAIL: gdb.threads/omp-par-scope.exp: single_scope: second thread: print s3
FAIL: gdb.threads/omp-par-scope.exp: single_scope: second thread: print i1
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i02
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i11
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i12
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print i22
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: first thread: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: second thread: print i11
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: second thread: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: multi_scope: after parallel: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print l
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 1st stop: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 2nd stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 2nd stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print l
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 3rd stop: print k
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 4th stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: inner_threads: 4th stop: print num
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: outer_threads: outer stop: print file_scope_var
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: outer_threads: outer stop: print i
FAIL: gdb.threads/omp-par-scope.exp: nested_parallel: outer_threads: outer stop: print j
For both clang and icc, it turns out that there are some problems with
the DWARF that these compilers generate. Of the two, icc does at
least nest the subprogram of the outlined function representing the
parallel region within the function that it's defined, but does not
handle inner scopes if they exist. clang places the subprogram for
the outlined function at the same level as the containing function, so
variables declared within the function aren't visible at all.
I could call setup_xfail to avoid FAILs for clang and icc also, but I don't
want to further complicate the test.
gdb/testsuite/ChangeLog:
* gdb.threads/omp-par-scope.c: New file.
* gdb/threads/omp-par-scope.exp: New file.
Kevin Buettner [Sat, 9 Nov 2019 18:09:41 +0000 (11:09 -0700)]
Add gdb_caching_proc support_nested_function_tests to lib/gdb.exp
This commit adds the gdb_caching_proc, support_nested_function_tests,
to lib/gdb.exp. It tests to see whether or not the C compiler has
support for nested function calls.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (support_nested_function_tests): New proc.
Replace the remaining uses of strerror with safe_strerror
To do that, this patch makes IPA compile safe-strerror as well. Because
it doesn't use Gnulib, it calls the Glibc version of strerror_r directly.
Consequently this patch also removes the configure checks for strerror.
gdb/ChangeLog:
2019-12-10 Christian Biesinger <cbiesinger@google.com>
* config.in: Regenerate.
* configure: Regenerate.
* gdbsupport/agent.c (gdb_connect_sync_socket): Call
safe_strerror instead of strerror.
* gdbsupport/common.m4: Don't check for strerror.
* gdbsupport/safe-strerror.c: Support both the glibc version
of strerror_r and the XSI version.
gdb/gdbserver/ChangeLog:
2019-12-10 Christian Biesinger <cbiesinger@google.com>
* Makefile.in: Add safe-strerror.c to gdbreplay and IPA, and change
UNDO_GNULIB_CFLAGS to undo strerror_r instead of strerror.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac: Don't check for strerror.
* linux-i386-ipa.c (initialize_fast_tracepoint_trampoline_buffer):
Call safe_strerror instead of strerror.
* server.h (strerror): Remove this now-unnecessary declaration.
* tracepoint.c (init_named_socket): Call safe_strerror instead of
strerror.
(gdb_agent_helper_thread): Likewise.
* utils.c (perror_with_name): Likewise.
Andre Vieira [Tue, 10 Dec 2019 16:10:17 +0000 (16:10 +0000)]
[gas][arm] Set context table for '.arch_extension'
This patch fixes .arch_extension behaviour.
Currently, context table for '.arch_extension' is only set while
"-march" processing, but it is not set while .arch processing,
so following code is rejected