Jeff King [Fri, 21 Aug 2020 17:58:00 +0000 (13:58 -0400)]
index-pack: adjust default threading cap
Commit b8a2486f15 (index-pack: support multithreaded delta resolving,
2012-05-06) describes an experiment that shows that setting the number
of threads for index-pack higher than 3 does not help.
I repeated that experiment using a more modern version of Git and a more
modern CPU and got different results.
Here are timings for p5302 against linux.git run on my laptop, a Core
i9-9880H with 8 cores plus hyperthreading (so online-cpus returns 16):
You can see that wall-clock times continue to improve dramatically up to
the number of cores, but bumping beyond that (into hyperthreading
territory) does not help (and in fact hurts a little).
Here's the same experiment on a machine with dual Xeon 6230's, totaling
40 cores (80 with hyperthreading):
The results are similar; things stop improving at 40 threads. Curiously,
going from 20 to 40 really doesn't help much, either (and increases CPU
time considerably). So that may represent an actual barrier to
parallelism, where we lose out due to context-switching and loss of
cache locality, but don't reap the wall-clock benefits due to contention
of our coarse-grained locks.
So what's a good default value? It's clear that the current cap of 3 is
too low; our default values are 42% and 57% slower than the best times
on each machine. The results on the 40-core machine imply that 20
threads is an actual barrier regardless of the number of cores, so we'll
take that as a maximum. We get the best results on these machines at
half of the online-cpus value. That's presumably a result of the
hyperthreading. That's common on multi-core Intel processors, but not
necessarily elsewhere. But if we take it as an assumption, we can
perform optimally on hyperthreaded machines and still do much better
than the status quo on other machines, as long as we never half below
the current value of 3.
So that's what this patch does.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 21 Aug 2020 17:54:51 +0000 (13:54 -0400)]
p5302: count up to online-cpus for thread tests
When PERF_EXTRA is enabled, p5302 checks the performance of index-pack
with various numbers of threads. This can be useful for deciding what
the default should be (which is currently capped at 3 threads based on
the results of this script).
However, we only go up to 8 threads, and modern machines may have more.
Let's get the number of CPUs from test-tool, and test various numbers of
threads between one and that maximum.
Note that the current tests aren't all identical, as we have to set
GIT_FORCE_THREADS for the --threads=1 test (which measures the overhead
of starting a single worker thread versus the "0" case of using the main
thread). To keep the loop simple, we'll keep the "0" case out of it, and
set GIT_FORCE_THREADS=1 for all of the other cases (it's a noop for all
but the "1" case, since numbers higher than 1 would always need
threads).
Note also that we could skip running "test-tool" if PERF_EXTRA isn't
set. However, there's some small value in knowing the number of threads,
so that we can mark each test as skipped in the output.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 21 Aug 2020 17:53:39 +0000 (13:53 -0400)]
p5302: disable thread-count parameter tests by default
The primary function of the perf suite is to detect regressions (or
improvements) between versions of Git. The only numbers we show a direct
comparison for are timings between the same test run on two different
versions.
However, it can sometimes be used to collect other information. For
instance, p5302 runs the same index-pack operation with different thread
counts. The output doesn't directly compare these, but anybody
interested in working on index-pack can manually compare the results.
For a normal regression run of the full perf-suite, though, this incurs
a significant cost to generate numbers nobody will actually look at;
about 25% of the total time of the test suite is spent in p5302. And the
low-thread-count runs are the most expensive part of it, since they're
(unsurprisingly) not using as many threads.
Let's skip these tests by default, but make it possible for people
working on index-pack to still run them by setting an environment
variable. Rather than make this specific to p5302, let's introduce a
generic mechanism. This makes it possible to run the full suite with
every possible test if somebody really wants to burn some CPU.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shourya Shukla [Fri, 21 Aug 2020 16:59:51 +0000 (22:29 +0530)]
t7401: change indentation for enhanced readability
Change the indentation of expected outputs for enhanced readability of
the tests. Also modify the heredoc string limiter in a test which lacks
it to support the indentation change.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Taylor Blau <me@taylorr.com> Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shourya Shukla [Fri, 21 Aug 2020 16:59:50 +0000 (22:29 +0530)]
t7401: change syntax of test_i18ncmp calls for clarity
Change the test_i18ncmp syntax from 'test_i18ncmp actual expected' to
'test_i18ncmp expected actual' to align it with the convention followed
by other tests in the test script.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shourya Shukla [Fri, 21 Aug 2020 16:59:49 +0000 (22:29 +0530)]
t7401: use 'short' instead of 'verify' and cut in rev-parse calls
'git rev-parse' can limit the number of characters in the hash it
outputs using the '--short' option, thereby, making the 'cut' invocation
redundant. Since using '--short' implies '--verify' as well, we can
safely replace the latter with the former. This change results in the
helper functions getting the hash in the same way 'summary' gets the
hash internally.
So, avoid the unnecessary invocation to 'cut' in the helper
functions.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shourya Shukla [Fri, 21 Aug 2020 16:59:48 +0000 (22:29 +0530)]
t7401: modernize style
The tests in 't7401-submodule-summary.sh' were written a long time ago
and has a violation with respect to our CodingGuidelines which is,
incorrect spacing in usages of the redirection operator.
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com> Helped-by: Denton Liu <liu.denton@gmail.com> Helped-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Han-Wen Nienhuys [Fri, 21 Aug 2020 16:59:36 +0000 (16:59 +0000)]
builtin/commit: suggest update-ref for pseudoref removal
When pseudorefs move to a different ref storage mechanism, pseudorefs no longer
can be removed with 'rm'. Instead, suggest a "update-ref -d" command, which will
work regardless of ref storage backend.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Raymond E. Pasco [Thu, 20 Aug 2020 23:10:51 +0000 (19:10 -0400)]
git-apply.txt: update descriptions of --cached, --index
The blurb for "--cached" says it implies "--index", but in reality
"--cached" and "--index" are distinct modes with different behavior.
Additionally, the descriptions of "--index" and "--cached" are somewhat
unclear about what might be modified, and what "--index" looks for to
determine that the index and working copy "match".
Rewrite the blurbs for both options for clarity and accuracy.
Signed-off-by: Raymond E. Pasco <ray@ameretat.dev> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Thu, 20 Aug 2020 17:51:16 +0000 (10:51 -0700)]
fetch-pack: in partial clone, pass --promisor
When fetching a pack from a promisor remote, the corresponding .promisor
file needs to be created. "fetch-pack" originally did this by passing
"--promisor" to "index-pack", but in 5374a290aa ("fetch-pack: write
fetched refs to .promisor", 2019-10-16), "fetch-pack" was taught to do
this itself instead, because it needed to store ref information in the
.promisor file.
This causes a problem with superprojects when transfer.fsckobjects is
set, because in the current implementation, it is "index-pack" that
calls fsck_finish() to check the objects; before 5374a290aa,
fsck_finish() would see that .gitmodules is a promisor object and
tolerate it being missing, but after, there is no .promisor file (at the
time of the invocation of fsck_finish() by "index-pack") to tell it that
.gitmodules is a promisor object, so it returns an error.
Therefore, teach "fetch-pack" to pass "--promisor" to index pack once
again. "fetch-pack" will subsequently overwrite this file with the ref
information.
An alternative is to instead move object checking to "fetch-pack", and
let "index-pack" only index the files. However, since "index-pack" has
to inflate objects in order to index them, it seems reasonable to also
let it check the objects (which also require inflated files).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matthew Rogers [Thu, 20 Aug 2020 00:41:32 +0000 (00:41 +0000)]
diff: teach --stat to ignore uninteresting modifications
When options such as --ignore-space-change are in use, files with
modifications can have no interesting textual changes worth showing. In
such cases, "git diff --stat" shows 0 lines of additions and deletions.
Teach "git diff --stat" not to show such a path in its output, which
would be more natural.
However, we don't want to prevent the display of all files that have 0
effective diffs since they could be the result of a rename, permission
change, or other similar operation that may still be of interest so we
special case additions and deletions as they are always interesting.
Signed-off-by: Matthew Rogers <mattr94@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ryan Zoeller [Wed, 19 Aug 2020 23:06:08 +0000 (23:06 +0000)]
parse-options: add --git-completion-helper-all
--git-completion-helper excludes hidden options, such as --allow-empty
for git commit. This is typically helpful, but occasionally we want
auto-completion for obscure flags. --git-completion-helper-all returns
all options, even if they are marked as hidden or nocomplete.
Signed-off-by: Ryan Zoeller <rtzoeller@rtzoeller.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 19 Aug 2020 23:14:52 +0000 (16:14 -0700)]
Merge branch 'ma/sha-256-docs'
Further update of docs to adjust to the recent SHA-256 work.
* ma/sha-256-docs:
shallow.txt: document SHA-256 shallow format
protocol-capabilities.txt: clarify "allow-x-sha1-in-want" re SHA-256
index-format.txt: document SHA-256 index format
http-protocol.txt: document SHA-256 "want"/"have" format
Junio C Hamano [Wed, 19 Aug 2020 23:14:49 +0000 (16:14 -0700)]
Merge branch 'jk/blame-coalesce-fix'
When given more than one target line ranges, "git blame -La,b
-Lc,d" was over-eager to coalesce groups of original lines and
showed incorrect results, which has been corrected.
* jk/blame-coalesce-fix:
blame: only coalesce lines that are adjacent in result
t8003: factor setup out of coalesce test
t8003: check output of coalesced blame
Junio C Hamano [Wed, 19 Aug 2020 23:14:43 +0000 (16:14 -0700)]
Merge branch 'en/merge-tests'
Updates to "git merge" tests, in preparation for a new merge
strategy backend.
* en/merge-tests:
t6425: be more flexible with rename/delete conflict messages
t642[23]: be more flexible for add/add conflicts involving pair renames
t6422, t6426: be more flexible for add/add conflicts involving renames
t6423: add an explanation about why one of the tests does not pass
t6416, t6423: clarify some comments and fix some typos
t6422: fix multiple errors with the mod6 test expectations
t6423: fix test setup for a couple tests
t6416, t6422: fix incorrect untracked file count
t6422: fix bad check against missing file
t6418: tighten delete/normalize conflict testcase
Collect merge-related tests to t64xx
Rohit Ashiwal [Mon, 17 Aug 2020 17:40:04 +0000 (18:40 +0100)]
rebase: add --reset-author-date
The previous commit introduced --ignore-date flag to rebase -i, but the
name is rather vague as it does not say whether the author date or the
committer date is ignored. Add an alias to convey the precise purpose.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Mon, 17 Aug 2020 17:40:03 +0000 (18:40 +0100)]
rebase -i: support --ignore-date
Rebase is implemented with two different backends - 'apply' and
'merge' each of which support a different set of options. In
particular the apply backend supports a number of options implemented
by 'git am' that are not implemented in the merge backend. This means
that the available options are different depending on which backend is
used which is confusing. This patch adds support for the --ignore-date
option to the merge backend. This option uses the current time as the
author date rather than reusing the original author date when
rewriting commits. We take care to handle the combination of
--ignore-date and --committer-date-is-author-date in the same way as
the apply backend.
Original-patch-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Han-Wen Nienhuys [Wed, 19 Aug 2020 14:27:58 +0000 (14:27 +0000)]
refs: read FETCH_HEAD and MERGE_HEAD generically
The FETCH_HEAD and MERGE_HEAD refs must be stored in a file, regardless of the
type of ref backend. This is because they can hold more than just a single ref.
To accomodate them for alternate ref backends, read them from a file generically
in refs_read_raw_ref()
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 18 Aug 2020 22:58:26 +0000 (22:58 +0000)]
dir: fix problematic API to avoid memory leaks
The dir structure seemed to have a number of leaks and problems around
it. First I noticed that parent_hashmap and recursive_hashmap were
being leaked (though Peff noticed and submitted fixes before me). Then
I noticed in the previous commit that clear_directory() was only taking
responsibility for a subset of fields within dir_struct, despite the
fact that entries[] and ignored[] we allocated internally to dir.c.
That, of course, resulted in many callers either leaking or haphazardly
trying to free these arrays and their contents.
Digging further, I found that despite the pretty clear documentation
near the top of dir.h that folks were supposed to call clear_directory()
when the user no longer needed the dir_struct, there were four callers
that didn't bother doing that at all. However, two of them clearly
thought about leaks since they had an UNLEAK(dir) directive, which to me
suggests that the method to free the data was too unclear. I suspect
the non-obviousness of the API and its holes led folks to avoid it,
which then snowballed into further problems with the entries[],
ignored[], parent_hashmap, and recursive_hashmap problems.
Rename clear_directory() to dir_clear() to be more in line with other
data structures in git, and introduce a dir_init() to handle the
suggested memsetting of dir_struct to all zeroes. I hope that a name
like "dir_clear()" is more clear, and that the presence of dir_init()
will provide a hint to those looking at the code that they need to look
for either a dir_clear() or a dir_free() and lead them to find
dir_clear().
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 18 Aug 2020 22:58:25 +0000 (22:58 +0000)]
dir: make clear_directory() free all relevant memory
The calling convention for the dir API is supposed to end with a call to
clear_directory() to free up no longer needed memory. However,
clear_directory() didn't free dir->entries or dir->ignored. I believe
this was an oversight, but a number of callers noticed memory leaks and
started free'ing these. Unfortunately, they did so somewhat haphazardly
(sometimes freeing the entries in the arrays, and sometimes only
free'ing the arrays themselves). This suggests the callers weren't
trying to make sure any possible memory used might be free'd, but just
the memory they noticed their usecase definitely had allocated.
Fix this mess by moving all the duplicated free'ing logic into
clear_directory(). End by resetting dir to a pristine state so it could
be reused if desired.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Tue, 18 Aug 2020 04:01:36 +0000 (21:01 -0700)]
promisor-remote: lazy-fetch objects in subprocess
Teach Git to lazy-fetch missing objects in a subprocess instead of doing
it in-process. This allows any fatal errors that occur during the fetch
to be isolated and converted into an error return value, instead of
causing the current command being run to terminate.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Tue, 18 Aug 2020 22:08:54 +0000 (00:08 +0200)]
patch-id: ignore newline at end of file in diff_flush_patch_id()
Whitespace is ignored when calculating patch IDs. This is done by
removing all whitespace from diff lines before hashing them, including
a newline at the end of a file. If that newline is missing, however,
diff reports that fact in a separate line containing "\ No newline at
end of file\n", and this marker is hashed like a context line.
This goes against our goal of making patch IDs independent of
whitespace. Use the same heuristic that 2485eab55cc (git-patch-id: do
not trip over "no newline" markers, 2011-02-17) added to git patch-id
instead and skip diff lines that start with a backslash and a space
and are longer than twelve characters.
Reported-by: Tilman Vogel <tilman.vogel@web.de> Initial-test-by: Tilman Vogel <tilman.vogel@web.de> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Tue, 18 Aug 2020 04:01:35 +0000 (21:01 -0700)]
fetch-pack: do not lazy-fetch during ref iteration
In order to determine negotiation tips, "fetch-pack" iterates over all
refs and dereferences all annotated tags found. This causes the
existence of targets of refs and annotated tags to be checked. Avoiding
this is especially important when we use "git fetch" (which invokes
"fetch-pack") to perform lazy fetches in a partial clone because a
target of such a ref or annotated tag may need to be itself lazy-fetched
(and otherwise causing an infinite loop).
Therefore, teach "fetch-pack" not to lazy fetch whenever iterating over
refs. This is done by using the raw form of ref iteration and by
dereferencing tags ourselves.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Tue, 18 Aug 2020 04:01:34 +0000 (21:01 -0700)]
fetch: only populate existing_refs if needed
In "fetch", get_ref_map() iterates over all refs to populate
"existing_refs" in order to populate peer_ref->old_oid in the returned
refmap, even if the refmap has no peer_ref set - which is the case when
only literal hashes (i.e. no refs by name) are fetched.
Iterating over refs causes the targets of those refs to be checked for
existence. Avoiding this is especially important when we use "git fetch"
to perform lazy fetches in a partial clone because a target of such a
ref may need to be itself lazy-fetched (and otherwise causing an
infinite loop).
Therefore, avoid populating "existing_refs" until necessary. With this
patch, because Git lazy-fetches objects by literal hashes (to be done in
a subsequent commit), it will then be able to guarantee avoiding reading
targets of refs.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Tue, 18 Aug 2020 04:01:33 +0000 (21:01 -0700)]
fetch: avoid reading submodule config until needed
In "fetch", there are two parameters submodule_fetch_jobs_config and
recurse_submodules that can be set in a variety of ways: through
.gitmodules, through .git/config, and through the command line.
Currently "fetch" handles this by first reading .gitmodules, then
reading .git/config (allowing it to overwrite existing values), then
reading the command line (allowing it to overwrite existing values).
Notice that we can avoid reading .gitmodules if .git/config and/or the
command line already provides us with what we need. In addition, if
recurse_submodules is found to be "no", we do not need the value of
submodule_fetch_jobs_config.
Avoiding reading .gitmodules is especially important when we use "git
fetch" to perform lazy fetches in a partial clone because the
.gitmodules file itself might need to be lazy fetched (and otherwise
causing an infinite loop).
In light of all this, avoid reading .gitmodules until necessary. When
reading it, we may only need one of the two parameters it provides, so
teach fetch_config_from_gitmodules() to support NULL arguments. With
this patch, users (including Git itself when invoking "git fetch" to
lazy-fetch) will be able to guarantee avoiding reading .gitmodules by
passing --recurse-submodules=no.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Tue, 18 Aug 2020 04:01:32 +0000 (21:01 -0700)]
fetch: allow refspecs specified through stdin
In a subsequent patch, partial clones will be taught to fetch missing
objects using a "git fetch" subprocess. Because the number of objects
fetched may be too numerous to fit on the command line, teach "fetch" to
accept refspecs passed through stdin.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Tue, 18 Aug 2020 04:01:31 +0000 (21:01 -0700)]
negotiator/noop: add noop fetch negotiator
Add a noop fetch negotiator. This is introduced to allow partial clones
to skip the unneeded negotiation step when fetching missing objects
using a "git fetch" subprocess. (The implementation of spawning a "git
fetch" subprocess will be done in a subsequent patch.) But this can also
be useful for end users, e.g. as a blunt fix for object corruption.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run fetch but record the result in remote-tracking branches,
and either if you do nothing with the fetched refs (e.g. you are
merely mirroring) or if you always work from the remote-tracking
refs (e.g. you fetch and then merge origin/branchname separately),
you can get away with having no FETCH_HEAD at all.
Teach "git fetch" a command line option "--[no-]write-fetch-head".
The default is to write FETCH_HEAD, and the option is primarily
meant to be used with the "--no-" prefix to override this default,
because there is no matching fetch.writeFetchHEAD configuration
variable to flip the default to off (in which case, the positive
form may become necessary to defeat it).
Note that under "--dry-run" mode, FETCH_HEAD is never written;
otherwise you'd see list of objects in the file that you do not
actually have. Passing `--write-fetch-head` does not force `git
fetch` to write the file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Aug 2020 17:37:57 +0000 (17:37 +0000)]
mem-pool: use consistent pool variable name
About half the function declarations in mem-pool.h used 'struct mem_pool
*pool', while the other half used 'struct mem_pool *mem_pool'. Make the
code a bit more consistent by just using 'pool' in preference to
'mem_pool' everywhere.
No behavioral changes included; this is just a mechanical rename (though
a line or two was rewrapped as well).
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Aug 2020 17:37:56 +0000 (17:37 +0000)]
mem-pool: use more standard initialization and finalization
A typical memory type, such as strbuf, hashmap, or string_list can be
stored on the stack or embedded within another structure. mem_pool
cannot be, because of how mem_pool_init() and mem_pool_discard() are
written. mem_pool_init() does essentially the following (simplified
for purposes of explanation here):
It seems weird to require that mem_pools can only be accessed through a
pointer. It also seems slightly dangerous: unlike strbuf_release() or
strbuf_reset() or string_list_clear(), all of which put the data
structure into a state where it can be re-used after the call,
mem_pool_discard(pool) will leave pool pointing at free'd memory.
read-cache (and split-index) are the only current users of mem_pools,
and they haven't fallen into a use-after-free mistake here, but it seems
likely to be problematic for future users especially since several of
the current callers of mem_pool_init() will only call it when the
mem_pool* is not already allocated (i.e. is NULL).
This type of mechanism also prevents finding synchronization
points where one can free existing memory and then resume more
operations. It would be natural at such points to run something like
mem_pool_discard(pool...);
and, if necessary,
mem_pool_init(&pool...);
and then carry on continuing to use the pool. However, this fails badly
if several objects had a copy of the value of pool from before these
commands; in such a case, those objects won't get the updated value of
pool that mem_pool_init() overwrites pool with and they'll all instead
be reading and writing from free'd memory.
Modify mem_pool_init()/mem_pool_discard() to behave more like
strbuf_init()/strbuf_release()
or
string_list_init()/string_list_clear()
In particular: (1) make mem_pool_init() just take a mem_pool* and have
it only worry about allocating struct mp_blocks, not the struct mem_pool
itself, (2) make mem_pool_discard() free the memory that the pool was
responsible for, but leave it in a state where it can be used to
allocate more memory afterward (without the need to call mem_pool_init()
again).
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Aug 2020 17:37:55 +0000 (17:37 +0000)]
mem-pool: add convenience functions for strdup and strndup
fast-import had a special mem_pool_strdup() convenience function that I
want to be able to use from the new merge algorithm I am writing. Move
it from fast-import to mem-pool, and also add a mem_pool_strndup()
while at it that I also want to use.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 18 Aug 2020 00:02:49 +0000 (17:02 -0700)]
Merge branch 'so/log-diff-merges-opt'
Earlier, to countermand the implicit "-m" option when the
"--first-parent" option is used with "git log", we added the
"--[no-]diff-merges" option in the jk/log-fp-implies-m topic. To
leave the door open to allow the "--diff-merges" option to take
values that instructs how patches for merge commits should be
computed (e.g. "cc"? "-p against first parent?"), redefine
"--diff-merges" to take non-optional value, and implement "off"
that means the same thing as "--no-diff-merges".
* so/log-diff-merges-opt:
t/t4013: add test for --diff-merges=off
doc/git-log: describe --diff-merges=off
revision: change "--diff-merges" option to require parameter
Junio C Hamano [Tue, 18 Aug 2020 00:02:49 +0000 (17:02 -0700)]
Merge branch 'jk/log-fp-implies-m'
"git log --first-parent -p" showed patches only for single-parent
commits on the first-parent chain; the "--first-parent" option has
been made to imply "-m". Use "--no-diff-merges" to restore the
previous behaviour to omit patches for merge commits.
* jk/log-fp-implies-m:
doc/git-log: clarify handling of merge commit diffs
doc/git-log: move "-t" into diff-options list
doc/git-log: drop "-r" diff option
doc/git-log: move "Diff Formatting" from rev-list-options
log: enable "-m" automatically with "--first-parent"
revision: add "--no-diff-merges" option to counteract "-m"
log: drop "--cc implies -m" logic
Junio C Hamano [Tue, 18 Aug 2020 00:02:46 +0000 (17:02 -0700)]
Merge branch 'rp/apply-cached-with-i-t-a'
Recent versions of "git diff-files" shows a diff between the index
and the working tree for "intent-to-add" paths as a "new file"
patch; "git apply --cached" should be able to take "git diff-files"
and should act as an equivalent to "git add" for the path, but the
command failed to do so for such a path.
* rp/apply-cached-with-i-t-a:
t4140: test apply with i-t-a paths
apply: make i-t-a entries never match worktree
apply: allow "new file" patches on i-t-a entries
Junio C Hamano [Tue, 18 Aug 2020 00:02:44 +0000 (17:02 -0700)]
Merge branch 'jc/noop-with-static-inline'
A no-op replacement function implemented as a C preprocessor macro
does not perform as good a job as one implemented as a "static
inline" function in catching errors in parameters; replace the
former with the latter in <git-compat-util.h> header.
* jc/noop-with-static-inline:
compat-util: type-check parameters of no-op replacement functions
Junio C Hamano [Tue, 18 Aug 2020 00:02:42 +0000 (17:02 -0700)]
Merge branch 'hn/reftable-prep-part-2'
Further preliminary change to refs API.
* hn/reftable-prep-part-2:
Make HEAD a PSEUDOREF rather than PER_WORKTREE.
Modify pseudo refs through ref backend storage
t1400: use git rev-parse for testing PSEUDOREF existence
Junio C Hamano [Tue, 18 Aug 2020 00:02:40 +0000 (17:02 -0700)]
Merge branch 'ps/ref-transaction-hook'
The logic to find the ref transaction hook script attempted to
cache the path to the found hook without realizing that it needed
to keep a copied value, as the API it used returned a transitory
buffer space. This has been corrected.
Derrick Stolee [Mon, 17 Aug 2020 14:04:48 +0000 (14:04 +0000)]
multi-pack-index: use hash version byte
Similar to the commit-graph format, the multi-pack-index format has a
byte in the header intended to track the hash version used to write the
file. This allows one to interpret the hash length without having the
context of the repository config specifying the hash length. This was
not modified as part of the SHA-256 work because the hash length was
automatically up-shifted due to that config.
Since we have this byte available, we can make the file formats more
obviously incompatible instead of relying on other context from the
repository.
Add a new oid_version() method in midx.c similar to the one in
commit-graph.c. This is specifically made separate from that
implementation to avoid artificially linking the formats.
The test impact requires a few more things than the corresponding change
in the commit-graph format. Specifically, 'test-tool read-midx' was not
writing anything about this header value to output. Since the value
available in 'struct multi_pack_index' is hash_len instead of a version
value, we output "20" or "32" instead of "1" or "2".
Since we want a user to not have their Git commands fail if their
multi-pack-index has the incorrect hash version compared to the
repository's hash version, we relax the die() to an error() in
load_multi_pack_index(). This has some effect on 'git multi-pack-index
verify' as we need to check that a failed parse of a file that exists is
actually a verify error. For that test that checks the hash version
matches, we change the corrupted byte from "2" to "3" to ensure the test
fails for both hash algorithms.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 17 Aug 2020 14:04:47 +0000 (14:04 +0000)]
commit-graph: use the "hash version" byte
The commit-graph format reserved a byte among the header of the file to
store a "hash version". During the SHA-256 work, this was not modified
because file formats are not necessarily intended to work across hash
versions. If a repository has SHA-256 as its hash algorithm, it
automatically up-shifts the lengths of object names in all necessary
formats.
However, since we have this byte available for adjusting the version, we
can make the file formats more obviously incompatible instead of relying
on other context from the repository.
Update the oid_version() method in commit-graph.c to add a new value, 2,
for sha-256. This automatically writes the new value in a SHA-256
repository _and_ verifies the value is correct. This is a breaking
change relative to the current 'master' branch since 092b677 (Merge
branch 'bc/sha-256-cvs-svn-updates', 2020-08-13) but it is not breaking
relative to any released version of Git.
The test impact is relatively minor: the output of 'test-tool
read-graph' lists the header information, so those instances of '1' need
to be replaced with a variable determined by GIT_TEST_DEFAULT_HASH. A
more careful test is added that specifically creates a repository of
each type then swaps the commit-graph files. The important value here is
that the "git log" command succeeds while writing a message to stderr.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 17 Aug 2020 14:04:46 +0000 (14:04 +0000)]
t/README: document GIT_TEST_DEFAULT_HASH
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 17 Aug 2020 21:33:16 +0000 (17:33 -0400)]
submodule--helper: fix leak of core.worktree value
In the ensure_core_worktree() function, we load the core.worktree value
of the submodule repository using repo_config_get_string(). This
function copies the string, but we never free it, leaking the memory.
We can instead use the "tmp" version of that function to avoid the
allocation at all. We don't have to worry about lifetime issues, since
we never even look at the value (we just want to know if it's set).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 17 Aug 2020 21:33:13 +0000 (17:33 -0400)]
config: fix leak in git_config_get_expiry_in_days()
We use git_config_get_string() to retrieve the expiry value in a newly
allocated string. But after parsing it, we never free it, leaking the
memory.
We could fix this with a free() obviously, but there's an even better
solution: we can use the non-allocating "tmp" variant of the function;
we only need it to be valid for the lifetime of our parse function.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 17 Aug 2020 21:33:11 +0000 (17:33 -0400)]
config: drop git_config_get_string_const()
As evidenced by the leak fixes in the previous commit, the "const" in
git_config_get_string_const() clearly misleads people into thinking that
it does not allocate a copy of the string. We can fix this by renaming
it, but it's easier still to just drop it. Of the four remaining
callers:
- The one in git_config_parse_expiry() still needs to allocate, since
that's what its callers expect. We can just use the non-const
version and cast our pointer. Slightly ugly, but the damage is
contained in one spot.
- The two in apply are writing to global "const char *" variables, and
need to continue allocating. We often mark these as const because we
assign default string literals to them. But in this case we don't do
that, so we can just declare them as real "char *" pointers and use
the non-const version.
- The call in checkout doesn't actually need a copy; it can just use
the non-allocating "tmp" version of the function.
The function is also mentioned in the MyFirstContribution document. We
can swap that call out for the non-allocating "tmp" variant, which fits
well in the example given.
We'll drop the "configset" and "repo" variants, as well (which are
unused).
Note that this frees up the "const" name, so we could rename the "tmp"
variant back to that. But let's give some time for topics in flight to
adapt to the new code before doing so (if we do it too soon, the
function semantics will change but the compiler won't alert us).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Mon, 17 Aug 2020 17:40:02 +0000 (18:40 +0100)]
rebase -i: support --committer-date-is-author-date
Rebase is implemented with two different backends - 'apply' and
'merge' each of which support a different set of options. In
particular the apply backend supports a number of options implemented
by 'git am' that are not implemented in the merge backend. This means
that the available options are different depending on which backend is
used which is confusing. This patch adds support for the
--committer-date-is-author-date option to the merge backend. This
option uses the author date of the commit that is being rewritten as
the committer date when the new commit is created.
Original-patch-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com> Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Mon, 17 Aug 2020 17:40:01 +0000 (18:40 +0100)]
am: stop exporting GIT_COMMITTER_DATE
The implementation of --committer-date-is-author-date exports
GIT_COMMITTER_DATE to override the default committer date but does not
reset GIT_COMMITTER_DATE in the environment after creating the commit
so it is set in the environment of any hooks that get run. We're about
to add the same functionality to the sequencer and do not want to have
GIT_COMMITTER_DATE set when running hooks or exec commands so lets
update commit_tree_extended() to take an explicit committer so we
override the default date without setting GIT_COMMITTER_DATE in the
environment.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Phillip Wood [Mon, 17 Aug 2020 13:23:08 +0000 (13:23 +0000)]
add -p: fix checking of user input
When a file has been deleted the C version of add -p allows the user
to edit a hunk even though 'e' is not in the list of allowed
responses. (I think 'e' is disallowed because if the file is edited it
is no longer a deletion and we're not set up to rewrite the diff
header).
The invalid response was allowed because the test that determines
whether to display 'e' was not duplicated correctly in the code that
processes the user's choice. Fix this by using flags that are set when
constructing the prompt and checked when processing the user's choice
rather than repeating the check itself.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Mon, 17 Aug 2020 10:37:02 +0000 (10:37 +0000)]
mingw: improve performance of mingw_unlink()
Update mingw_unlink() to first try to delete the file with existing
permissions before trying to force it.
Windows throws an error when trying to delete a read-only file. The
mingw_unlink() compatibility wrapper always tries to _wchmod(666) the
file before calling _wunlink() to avoid that error. However, since
most files in the worktree are already writable, this is usually
wasted effort.
Update mingw_unlink() to just call DeleteFileW() directly and if that
succeeds return. If that fails, fall back into the existing code path
to update the permissions and use _wunlink() to get the existing
error code mapping.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Sun, 16 Aug 2020 10:01:18 +0000 (12:01 +0200)]
Documentation: mark `--object-format=sha256` as experimental
After eff45daab8 ("repository: enable SHA-256 support by default",
2020-07-29), vanilla builds of Git enable the user to run, e.g.,
git init --object-format=sha256
and hack away. This can be a good way to gain experience with the
SHA-256 world, e.g., to find bugs that
GIT_TEST_DEFAULT_HASH=sha256 make test
doesn't spot.
But it really is a separate world: Such SHA-256 repos will live entirely
separate from the (by now fairly large) set of SHA-1 repos. Interacting
across the border is possible in principle, e.g., through "diff + apply"
(or "format-patch + am"), but even that has its limitations: Applying a
SHA-256 diff in a SHA-1 repo works in the simple case, but if you need
to resort to `-3`, you're out of luck.
Similarly, "push + pull" should work, but you really will be operating
mostly offset from the rest of the world. That might be ok by the time
you initialize your repository, and it might be ok for several months
after that, but there might come a day when you're starting to regret
your use of `git init --object-format=sha256` and have dug yourself into
a fairly deep hole.
There are currently topics in flight to document our data formats and
protocols regarding SHA-256 and in some cases (midx and commit-graph),
we're considering adjusting how the file formats indicate which object
format to use.
Wherever `--object-format` is mentioned in our documentation, let's make
it clear that using it with "sha256" is experimental. If we later need
to explain why we can't handle data we generated back in 2020, we can
always point to this paragraph we're adding here.
By "include::"-ing a small blurb, we should be able to be consistent
throughout the documentation and can eventually gradually tone down the
severity of this text. One day, we might even use it to start phasing
out `--object-format=sha1`, but let's not get ahead of ourselves...
There's also `extensions.objectFormat`, but it's only mentioned three
times. Twice where we're adding this new disclaimer and in the third
spot we already have a "do not edit" warning. From there, interested
readers should eventually find this new one that we're adding here.
Because `GIT_DEFAULT_HASH` provides another entry point to this
functionality, document the experimental nature of it too.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Keller [Sat, 15 Aug 2020 00:25:08 +0000 (17:25 -0700)]
refspec: make sure stack refspec_item variables are zeroed
A couple of functions that used struct refspec_item did not zero out the
structure memory. This can result in unexpected behavior, especially if
additional parameters are ever added to refspec_item in the future. Use
memset to ensure that unset structure members are zero.
It may make sense to convert most of these uses of struct refspec_item
to use either struct initializers or refspec_item_init_or_die. However,
other similar code uses memset. Converting all of these uses has been
left as a future exercise.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jacob Keller [Sat, 15 Aug 2020 00:25:07 +0000 (17:25 -0700)]
refspec: fix documentation referring to refspec_item
In commit d27eb356bf25 ("remote: move doc to remote.h and refspec.h")
the documentation for the refspec structure was moved into refspec.h
This documentation refers to elements of the refspec_item, not the
struct refspec. Move the documentation slightly in order to align it
with the structure it is actually referring to.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Sat, 15 Aug 2020 16:06:01 +0000 (18:06 +0200)]
protocol-capabilities.txt: clarify "allow-x-sha1-in-want" re SHA-256
Two of our capabilities contain "sha1" in their names, but that's
historical. Clarify that object names are still to be given using
whatever object format has been negotiated using the "object-format"
capability.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Sat, 15 Aug 2020 16:06:00 +0000 (18:06 +0200)]
index-format.txt: document SHA-256 index format
Document that in SHA-1 repositories, we use SHA-1 and in SHA-256
repositories, we use SHA-256, then replace all other uses of "SHA-1"
with something more neutral. Avoid referring to "160-bit" hash values.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Wed, 12 Aug 2020 16:52:55 +0000 (18:52 +0200)]
upload-pack: use buffered I/O to talk to rev-list
Like f0bca72dc77 (send-pack: use buffered I/O to talk to pack-objects,
2016-06-08), significantly reduce the number of system calls and
simplify the code for sending object IDs to rev-list by using stdio's
buffering.
Take care to handle errors immediately to get the correct error code,
and to flush the buffer explicitly before closing the stream in order to
catch any write errors for these last bytes.
Helped-by: Chris Torek <chris.torek@gmail.com> Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Wed, 12 Aug 2020 16:52:54 +0000 (18:52 +0200)]
midx: use buffered I/O to talk to pack-objects
Like f0bca72dc77 (send-pack: use buffered I/O to talk to pack-objects,
2016-06-08), significantly reduce the number of system calls and
simplify the code for sending object IDs to pack-objects by using
stdio's buffering.
Helped-by: Chris Torek <chris.torek@gmail.com> Helped-by: Johannes Sixt <j6t@kdbg.org> Encouraged-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Wed, 12 Aug 2020 16:52:49 +0000 (18:52 +0200)]
connected: use buffered I/O to talk to rev-list
Like f0bca72dc77 (send-pack: use buffered I/O to talk to pack-objects,
2016-06-08), significantly reduce the number of system calls and
simplify the code for sending object IDs to rev-list by using stdio's
buffering.
Take care to handle errors immediately to get the correct error code,
and to flush the buffer explicitly before closing the stream in order to
catch any write errors for these last bytes.
Helped-by: Chris Torek <chris.torek@gmail.com> Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 14 Aug 2020 16:17:36 +0000 (12:17 -0400)]
config: fix leaks from git_config_get_string_const()
There are two functions to get a single config string:
- git_config_get_string()
- git_config_get_string_const()
One might naively think that the first one allocates a new string and
the second one just points us to the internal configset storage. But
in fact they both allocate a new copy; the second one exists only to
avoid having to cast when using it with a const global which we never
intend to free.
The documentation for the function explains that clearly, but it seems
I'm not alone in being surprised by this. Of 17 calls to the function,
13 of them leak the resulting value.
We could obviously fix these by adding the appropriate free(). But it
would be simpler still if we actually had a non-allocating way to get
the string. There's git_config_get_value() but that doesn't quite do
what we want. If the config key is present but is a boolean with no
value (e.g., "[foo]bar" in the file), then we'll get NULL (whereas the
string versions will print an error and die).
So let's introduce a new variant, git_config_get_string_tmp(), that
behaves as these callers expect. We need a new name because we have new
semantics but the same function signature (so even if we converted the
four remaining callers, topics in flight might be surprised). The "tmp"
is because this value should only be held onto for a short time. In
practice it's rare for us to clear and refresh the configset,
invalidating the pointer, but hopefully the "tmp" makes callers think
about the lifetime. In each of the converted cases here the value only
needs to last within the local function or its immediate caller.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 14 Aug 2020 16:14:53 +0000 (12:14 -0400)]
checkout: fix leak of non-existent branch names
We unconditionally write a branch name into a newly allocated buffer in
new_branch_info->path, via setup_branch_path(). We then check to see if
the branch exists; if not, we set that field to NULL, leaking the
memory. We should take care to free() it when doing so.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 14 Aug 2020 16:14:14 +0000 (12:14 -0400)]
submodule--helper: use strbuf_release() to free strbufs
The prepare_to_clone_next_submodule() function has a few local-variable
strbufs. We use strbuf_reset() throughout the function to reuse the
buffers over and over. But at the end of the function we also use
strbuf_reset() as they go out of scope, which means we end up leaking
their heap buffers. This should be strbuf_release() instead.
These were introduced by 48308681b0 (git submodule update: have a
dedicated helper for cloning, 2016-02-29), but it doesn't seem to have
the same mistake elsewhere. Likewise, I looked for other instances of
the pattern in the submodule--helper file but couldn't find any.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Wed, 12 Aug 2020 14:40:04 +0000 (14:40 +0000)]
sequencer: avoid garbled merge machinery messages due to commit labels
sequencer's get_message() exists to provide good labels on conflict
hunks; see commits d68565402a ("revert: clarify label on conflict hunks", 2010-03-20) bf975d379d ("cherry-pick, revert: add a label for ancestor", 2010-03-20) 043a4492b3 ("sequencer: factor code out of revert builtin", 2012-01-11).
for background on this function. These labels are of the form
<commitID>... <commit summary>
or
parent of <commitID>... <commit summary>
These labels are then passed as branch names to the merge machinery.
However, these labels, as formatted, often also serve to confuse. For
example, if we have a rename involved in a content merge, then it
results in text such as the following:
<<<<<<<< HEAD:foo.c
int j;
========
int counter;
>>>>>>>> b01dface... Removed unnecessary stuff:bar.c
Or in various conflict messages, it can make it very difficult to read:
CONFLICT (rename/delete): foo.c deleted in b01dface... Removed
unnecessary stuff and renamed in HEAD. Version HEAD of foo.c left
in tree.
CONFLICT (file location): dir1/foo.c added in b01dface... Removed
unnecessary stuff inside a directory that was renamed in HEAD,
suggesting it should perhaps be moved to dir2/foo.c.
Make a minor change to remove the ellipses and add parentheses around
the commit summary; this makes all three examples much easier to read:
<<<<<<<< HEAD:foo.c
int j;
========
int counter;
>>>>>>>> b01dface (Removed unnecessary stuff):bar.c
CONFLICT (rename/delete): foo.c deleted in b01dface (Removed
unnecessary stuff) and renamed in HEAD. Version HEAD of foo.c left
in tree.
CONFLICT (file location): dir1/foo.c added in b01dface (Removed
unnecessary stuff) inside a directory that was renamed in HEAD,
suggesting it should perhaps be moved to dir2/foo.c.
Signed-off-by: Elijah Newren <newren@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 14 Aug 2020 11:10:49 +0000 (07:10 -0400)]
clear_pattern_list(): clear embedded hashmaps
Commit 96cc8ab531 (sparse-checkout: use hashmaps for cone patterns,
2019-11-21) added some auxiliary hashmaps to the pattern_list struct,
but they're leaked when clear_pattern_list() is called.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Thu, 13 Aug 2020 22:49:01 +0000 (22:49 +0000)]
docs: fix step in transition plan
One of the required steps for the objectFormat extension is to implement
the loose object index. However, without support for
compatObjectFormat, we don't even know if the loose object index is
needed, so it makes sense to move that step to the compatObjectFormat
section. Do so.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Thu, 13 Aug 2020 22:49:00 +0000 (22:49 +0000)]
docs: document SHA-256 pack and indices
Now that we have SHA-256 support for packs and indices, let's document
that in SHA-256 repositories, we use SHA-256 instead of SHA-1 for object
names and checksums. Instead of duplicating this information throughout
the document, let's just document that in SHA-1 repositories, we use
SHA-1 for these purposes, and in SHA-256 repositories, we use SHA-256.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
