* ldctor.c (ldctor_build_sets): Just set SEC_KEEP once. Check for
an owner of a section before using it to look up a reloc type.
Don't set SEC_KEEP for the absolute section.
* config/i386/cygwin.mh: Move TERMCAP test code to configure.in.
* configure.in: Treat libtermcap.a detection as a special case when
hosting on cygwin.
* configure: Regenerate.
Keith Seitz [Wed, 3 Feb 1999 17:02:01 +0000 (17:02 +0000)]
* remote.c (remote_binary_download, remote_binary_length): New
static globals for dealing with binary transmissions.
(remote_write_bytes): Add support for binary downloads
by shadowing the "M" packet with a new "X" packet. This
defaults to ON; if the stub does not understand this, it
will fall back to using "M".
(putpkt): Add support for binary downloading.
* monitor.c (monitor_expect): The mon2000 monitor
on the MSA2000 will also emit random DC1/DC3 chars.
* m32r-stub.c: Change all char's to unsigned char's
to support binary downloading.
(handle_exception): Add support for binary downloading
via a new "X" packet.
(getpacket): Do NOT strip eighth bit of incoming chars.
Watch out for escaped characters in the incoming stream.
(putpacket): Do NOT strip eighth bit of incoming chars.
(bin2mem): New function to write binary data directly to
memory.
* m32r-rom.c: Add new "mon2000" target.
Jim Wilson [Wed, 3 Feb 1999 06:41:24 +0000 (06:41 +0000)]
Patch to fix canadian cross build problem with libcpp.a from Felix.
* Makefile.in (EXTRA_GCC_FLAGS): Set AR to $AR instead of
$AR_FOR_TARGET. Likewise for RANLIB.
Elena Zannoni [Tue, 2 Feb 1999 23:53:54 +0000 (23:53 +0000)]
Tue Feb 2 18:40:29 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* hp-psymtab-read.c (hpread_build_psymtabs): Coerce first arg
passed to make_cleanup to the correct type.
(hpread_quick_traverse): Change fifth arg to call to
hpread_end_psymtab to be 0.
Compare CURR_MODULE_END to 0 rather than NULL.
Get rid of ifdef'ed out code.
(scan_procs): Get rid of ifdef'ed out code.
* somread.c (som_symfile_read): Coerce first argument passed to
make_cleanup to the correct type.
Elena Zannoni [Tue, 2 Feb 1999 23:38:45 +0000 (23:38 +0000)]
Tue Feb 2 17:36:29 1999 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
* hp-psymtab-read.c (do_pxdb): New function. Check whether the
file needs to be processed by pxdb (an HP debug info massaging
tool), if so call it.
(hpread_build_psymtabs): Initialize scan_start to 0 and
simplify flow of control.
* somread.c (som_symfile_read): Add call to do_pxdb (),
in hp-psymtab-read.c.
* symfile.c (symbol_file_add): Remove ifdef'ed out HPUX specific
code.
(symfile_bfd_open): Remove HPUXHPPA ifdef'ed code. Code is now
in hp-psymtab-read.c.
Catherine Moore [Tue, 2 Feb 1999 03:55:35 +0000 (03:55 +0000)]
* elfarm-nabi.c: Renamed from elf32-arm-newabi.c.
* elfarm-oabi.c: Renamed from elf32-arm-oldabi.c
* Makefile.am: Use new files.
* Makefile.in: Regenerate.
* configure.in: Use new files.
* configure: Regenerate.
Catherine Moore [Tue, 2 Feb 1999 02:58:57 +0000 (02:58 +0000)]
* config/tc-i386.h (LONG_DOUBLE_MNEM_SUFFIX): Define.
(INTEL_DWORD_MNEM_SUFFIX): Define.
(BYTE_PTR): Define.
(WORD_PTR): Define.
(DWORD_PTR): Define.
(XWORD_PTR): Define.
(SHORT): Define.
(OFFSET_FLAT): Define.
(FLAT): Define.
(NONE_FOUND): Define.
(No_dSuf): Define.
(No_xSuf): Define.
* config/tc-i386.c (set_intel_syntax): New routine.
(intel_syntax): Declare.
(allow_naked_reg): Declare.
(md_pseudo_table): Support .intel_syntax and .att_syntax.
(intel_float_operand): New routine.
(md_assemble): Handle INTEL_DWORD_MNEM_SUFFIX.
Handle brackets as well as parens. Call i386_intel_operand for
intel syntax. Reverse operands if appropriate. Handle new
suffixes. Handle movzx and movsx.
(i386_is_reg): New routine.
(i386_immediate): New routine.
(i386_scale): New routine.
(i386_displacement): New routine.
(i386_operand_modifier): New routine.
(build_displacement_string): New routine.
(i386_parse_seg): New routine.
(i386_intel_memory_operand): New routine.
(i386_intel_operand): New routine.
(i386_operand): Call i386_displacement, i386_immediate,
i386_scale, etc. instead of handling inline.
(parse_register): Handle registers without prefix.
Jim Blandy [Mon, 1 Feb 1999 21:17:19 +0000 (21:17 +0000)]
Allow PPC users to select which PPC/RS6000 variant they're debugging
at run-time. At the moment, the only thing this affects is the
set of registers visible.
* config/rs6000/tm-rs6000.h (REGISTER_NAME): Define this as a call
to the function rs6000_register_name.
(rs6000_register_name): Include extern decl.
(NUM_REGS): Bump to 183. What's the right way to do this?
(FIRST_UISA_SP_REGNUM, LAST_UISA_SP_REGNUM): Renamed from
FIRST_SP_REGNUM, LAST_SP_REGNUM.
(REGISTER_BYTES): Recompute this.
* rs6000-tdep.c: Renamed all uses of FIRST_SP_REGNUM and
LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
some concomitant formatting changes.
#include "gdbcmd.h", so we can define commands here.
(struct variant): New structure.
(COMMON_UISA_REG_NAMES, PPC_UISA_SPR_NAMES, PPC_SEGMENT_REG_NAMES,
PPC_32_OEA_SPR_NAMES, num_registers): New macros.
(register_names_rs6000, register_names_uisa, register_names_403,
register_names_403GC, register_names_505, register_names_860,
register_names_601, register_names_602, register_names_603,
register_names_604, register_names_750, variants): New variables.
(rs6000_register_name, install_variant, find_variant_by_name,
install_variant_by_name, list_variants, show_current_variant,
set_processor, show_processor): New functions.
(_initialize_rs6000_tdep): Define new commands `set processor' and
`show processor', and call install_variant_by_name to set the
default variant.
* rs6000-nat.c: Renamed all uses of FIRST_SP_REGNUM and
LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
some concomitant formatting changes.
* configure.in: Accept the `--with-cpu' flag, to specify a default
processor variant.
* acconfig.h: Provide a blurb for TARGET_CPU_DEFAULT, which is set
by configure's `--with-cpu' flag.
* config.in, configure: Regenerated.
Martin Hunt [Mon, 1 Feb 1999 20:06:38 +0000 (20:06 +0000)]
1999-02-01 Martin Hunt <hunt@cygnus.com>
* gdbtk-cmds.c: (gdb_set_bp): Change the "type" argument
to be ASCII instead of an integer. Currently accepts "temp"
or "normal". Fixed error messages.
(gdb_set_bp_addr): Ditto.
Stan Shebs [Sun, 31 Jan 1999 21:46:19 +0000 (21:46 +0000)]
1999-01-31 J.T. Conklin <jtc@redbacknetworks.com>
* i386-stub.c, m32r-stub.c, m68k-stub.c, sh-stub.c, sparc-stub.c,
sparcl-stub, sparclet-stub.c: Change declaration of putDebugChar
to include explicit void return type as per documentation. Fix up
occasions where stubs erroneously checked return type.
Jim Ingham [Sat, 30 Jan 1999 04:20:31 +0000 (04:20 +0000)]
1999-01-29 James Ingham <jingham@cygnus.com>
* gdbtk.c (gdbtk_init): Set the fputs_unfiltered_hook to
gdbtk_fputs BEFORE you eval script. The old code was setting it
to null until after you did this, but that is wrong, because it
will cause the output of CAUGHT errors to go to gdb_stderr, which
is wrong. You only want to write errors to the console if the
eval generates an error.
Martin Hunt [Sat, 30 Jan 1999 02:56:04 +0000 (02:56 +0000)]
1999-01-29 Martin Hunt <hunt@cygnus.com>
* srcwin.test (click): New function that generates an event
at a location.
(srcwin-4.4): New test. Simulate a click on a line and
check for breakpoint set.
(srcwin-4.5): New test. Right-click on a line and select "Continue
to Here" from popup.
* srcwin.exp: Source srcwin3.test, which will test source window
assembly debugging on executables built without "-g".
Stan Shebs [Sat, 30 Jan 1999 00:03:21 +0000 (00:03 +0000)]
* gdb.hp/gen-so-thresh.c, so-thresh.sh, so-thresh.exp,
so-thresh.linkopts, so-thresh.mk: Move to gdb.hp from gdb.base
(shortening names from solib_threshold.exp etc), won't run on
anything but HP-UX for the foreseeable future.
* gdb.hp/Makefile.in, gdb.base/Makefile.in (clean): Adjust to
reflect move.
Martin Hunt [Fri, 29 Jan 1999 09:46:26 +0000 (09:46 +0000)]
1999-01-29 Martin Hunt <hunt@cygnus.com>
* gdbtk-cmds.c (gdb_get_breakpoint_info): When printing addresses,
do not rely on the format string "%lx" -- it does not exist for all
hosts. Use paddr instead.
(gdb_loadfile): Increase maximum line size to pass testsuite cases.
* gdbtk-hooks.c (gdbtk_add_hooks): Remove pc_changed_hook and
add register_changed_hook and memory_changed_hook.
(gdbtk_register_changed): New function.
(gdbtk_memory_changed): New function.
Martin Hunt [Fri, 29 Jan 1999 09:46:03 +0000 (09:46 +0000)]
1999-01-29 Martin Hunt <hunt@cygnus.com>
Changes from Keith Seitz <keiths@cygnus.com>
* valops.c (value_assign): Add calls to register_changed_hook and
memory_changed_hook to inform UIs that the user has changed
the target's registers/memory.
* findvar.c (write_register_gen): Remove call to pc_changed_hook.
* defs.h: Remove declaration for pc_changed_hook and
add declarations for register_changed_hook and
memory_changed_hook.
* top.c: Ditto.
Martin Hunt [Fri, 29 Jan 1999 08:56:14 +0000 (08:56 +0000)]
1999-01-29 Martin Hunt <hunt@cygnus.com>
* gdbtk.c (gdbtk_init): Create tcl warp_pointer command
for use with testing.
* gdbtk-cmds.c (gdb_loc): Fix for case where there are only
minimal symbols. Also make gdb_loc return the shared library
the location is in, if it is in one.
Ian Lance Taylor [Fri, 29 Jan 1999 01:07:32 +0000 (01:07 +0000)]
* binary.c (binary_set_section_contents): Don't return early for a
non-loadable section, in case the first section is non-loadable.
Don't set the low lma for a SEC_NEVER_LOAD section. From Maciej
W. Rozycki <macro@ds2.pg.gda.pl>.
projects / thirdparty / binutils-gdb.git / log
