media: i2c: ov6650: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: ov64a40: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: ov5695: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: ov5648: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: ov5647: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: ov5645: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: ov5640: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: ov2685: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: ov2659: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: ov02a10: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: mt9v111: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: mt9v032: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: mt9t112: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: mt9p031: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: mt9m114: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: mt9m111: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: mt9m001: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: imx415: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: imx412: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: imx335: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: imx334: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: imx296: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: imx290: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: imx283: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: imx219: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: imx214: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: hi846: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: gc2145: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: gc08a3: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: gc05a2: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: et8ek8: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper
devm_v4l2_sensor_clk_get() that works on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: ar0521: Use the v4l2 helper for obtaining the clock

devm_clk_get() fails on ACPI-based platforms, where firmware does not
provide a direct reference to the clock producer.

Replace devm_clk_get() with the new v4l2 helper devm_v4l2_sensor_clk_get()
that works on both DT- and ACPI-based platforms to retrieve a reference to
the clock producer from firmware.

Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

Documentation: media: camera-sensor: Mention v4l2_devm_sensor_clk_get() for obtaining the clock

Add the new v4l2 helper devm_v4l2_sensor_clk_get() to Documentation. the
helper works on both DT- and ACPI-based platforms to retrieve a
reference to the clock producer from firmware.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: i2c: Kconfig: Ensure a dependency on HAVE_CLK for VIDEO_CAMERA_SENSOR

Both ACPI and DT-based systems are required to obtain the external
camera sensor clock using the new devm_v4l2_sensor_clk_get() helper
function.

Ensure a dependency on HAVE_CLK when config VIDEO_CAMERA_SENSOR is
enabled.

Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: v4l2-common: Add a helper for obtaining the clock producer

Introduce a helper for v4l2 sensor drivers on both DT- and ACPI-based
platforms to retrieve a reference to the clock producer from firmware.

This helper behaves the same as devm_clk_get() except where there is
no clock producer like in ACPI-based platforms.

For ACPI-based platforms the function will read the "clock-frequency"
ACPI _DSD property and register a fixed frequency clock with the frequency
indicated in the property.

This function also handles the special ACPI-based system case where:
. The clock-frequency _DSD property is present.
. A reference to the clock producer is present, where the clock is provided
  by a camera sensor PMIC driver (e.g. int3472/tps68470.c)
In this case try to set the clock-frequency value to the provided clock.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: staging: Rename second ioctl handlers argument to 'void *priv'

The second argument to the ioctl handlers is not a file handle any more.
The standard practice is to name it 'void *priv' in drivers. Many
drivers still name it 'void *fh', and a few use more exotic names.
Replace those more exotic names with 'void *priv' in all media staging
drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: v4l2: Rename second ioctl handlers argument to 'void *priv'

The second argument to the ioctl handlers is not a file handle any more.
The standard practice is to name it 'void *priv' in drivers. Many
drivers still name it 'void *fh', and a few use more exotic names.
Replace those more exotic names with 'void *priv' in all media drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jai Luthra <jai.luthra@linux.dev>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: v4l2-core: Rename second ioctl handlers argument to 'void *priv'

The second argument to the ioctl handlers is not a file handle any more.
Rename it from 'void *fh' to 'void *priv' in the V4L2 core, to avoid
misconceptions.

While at it, align function arguments in include/media/v4l2-mem2mem.h.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: v4l2-pci-skeleton: Rename second ioctl handlers argument to 'void *priv'

The second argument to the ioctl handlers is not a file handle any more.
Rename it to 'void *priv', to avoid misconceptions. This is particularly
important in the v4l2-pci-skeleton driver, as it is meant to be a base
for new drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: uvcvideo: Rename second ioctl handlers argument to 'void *priv'

The second argument to the ioctl handlers is not a file handle any more.
Rename it from 'void *fh' to 'void *priv', to avoid misconceptions. This
is particularly important in the uvcvideo driver, as it is widely used
and can be taken as an example for new drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: test-drivers: Rename second ioctl handlers argument to 'void *priv'

The second argument to the ioctl handlers is not a file handle any more.
Rename it from 'void *fh' to 'void *priv', to avoid misconceptions. This
is particularly important in test drivers as they are meant to be used
as reference implementations.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: v4l2-ioctl: Push NULL fh argument down to ioctl wrappers

As ioctl handlers do not expect a priv argument anymore, start pushing
the NULL pointer down from __video_do_ioctl() to the ioctl wrappers.
This paves the way to dropping the void *priv argument to ioctl handlers
themselves.

Changes to ioctl wrappers have been generated with the following
coccinelle semantic patch:

@ioctl@
identifier v4l2_ioctls;
identifier ioctl;
identifier fn;
identifier debug;
expression flags;
@@
struct v4l2_ioctl_info v4l2_ioctls[] = {
...,
IOCTL_INFO(ioctl, fn, debug, flags),
...,
};

@depends on ioctl@
identifier ioctl.fn;
identifier ops;
identifier file;
identifier fh;
identifier arg;
identifier handler;
expression list args;
@@
-int fn(const struct v4l2_ioctl_ops *ops, struct file *file, void *fh, void *arg)
+int fn(const struct v4l2_ioctl_ops *ops, struct file *file, void *arg)
{
<...
- ops->handler(file, fh, args)
+ ops->handler(file, NULL, args)
...>
}

Manual changes have been added to handle the calls to
v4l_[gs]_selection(), drop the fh argument in the v4l2_ioctl_info
structure definition and in the DEFINE_V4L_STUB_FUNC() macro, and stop
passing NULL to the wrappers in __video_do_ioctl()

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: v4l2-ioctl: Stop passing fh pointer to ioctl handlers

Now that all drivers access the v4l2_fh from the file structure, there
is no need to pass it as an explicit argument to ioctl handlers. Set the
argument to NULL in the __video_do_ioctl() function, and rename the 'fh'
argument in the ioctl handler declarations to 'priv' indicate it does
not contain a file handle.

The argument could be removed altogether with a mechanical change
(probably using coccinelle), but there are plans to pass a new argument
to the ioctl handlers in the near future. The tree-wide change to remove
the argument, only to add another one soon after, would be too much
churn.

While at it, fix argument alignment in vidioc_try_fmt_vid_out_overlay().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: staging: imx: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: usb: uvc: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: usb: hdpvr: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: ivtv: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

While at it remove the only left user of fh2id() and remove
the macro completely.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: cx18: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: omap3isp: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

While at it remove the only left user of to_isp_video_fh() and remove
the macro completely.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: hantro: Access v4l2_fh from file->private_data

To prepare for the introduction of video_device_state as second argument
of the v4l2_ioctl_ops handler, access the v4l2_fh from
file->private_data instead of using void *priv.

The file->private_data is initialized to point to the v4l2_fh
by the usage of v4l2_fh_init() in the v4l2_file_operations.open()
handler.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: stm32: dma2d: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: st: delta: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: bdisp: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: s5p-mfc: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: s5p-mfc: Store s5p_mfc_ctx in vb2_queue.drv_priv

The driver stores a pointer to a v4l2_fh in the vb2_queue.drv_priv,
which it then has to cast to a s5p_mfc_ctx pointer in all vb2 queue
operations. Store the pointer to the s5p_mfc_ctx instead to avoid the
cast. While at it, use the vb2_get_drv_priv() helper to access the
field.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: s5p-jpeg: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: s5p-g2d: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: s3c-camif: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh from the file * in all ioctl handlers. The v4l2_fh
pointer is used to keep track of which user owns the streaming queue.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: exynos4-is: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: exynos-gsc: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: rockchip: rkvdec: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Detlev Casanova <detlev.casanova@collabora.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: rockhip: rga: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: renesas: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: nxp: mx2: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: imx-isi: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: imx-jpeg: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Ming Qian <ming.qian@oss.nxp.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: tegra-vde: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: mtk: vcodec: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

While at modify mtk_vcodec_enc_get_chip_name() to accept a ctx instead
of a raw void *.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: mtk: mdp3: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: mtk_mdp_m2m: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: mtk: jpeg: Access v4l2_fh from file->private_data

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: m2m-deinterlace: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: wave5: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: coda: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: meson-ge2d: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: allegro: Access v4l2_fh from file

The v4l2_fh associated with an open file handle is now guaranteed
to be available in file->private_data, initialised by v4l2_fh_add().

Access the v4l2_fh, and from there the driver-specific structure,
from the file * in all ioctl handlers.

While at it remove the only left user of fh_to_channel() and remove
the macro completely.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Co-developed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: v4l2-ioctl: Access v4l2_fh from private_data

Now that it is guaranteed that file->private_data is set to point to the
'struct v4l2_fh' initialised by v4l2_fh_add() the v4l2-ioctl layer can
be modified to retrieve the v4l2_fh pointer from the file *.

As the __video_do_ioctl() function, that calls all the handlers modified
by this patch goes as:

static long __video_do_ioctl(struct file *file,
unsigned int cmd, void *arg)
{
void *fh = file->private_data;

...

ret = info->func(ops, file, fh, arg);

}

This patch introduces no functional changes and makes it possible to
remove in future the 'fh' argument to all ioctl handlers.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: zoran: Rename __fh to fh

Unless there is a good reason to do so, naming variable with double
underscore is generally not a good idea.

Rename the (mostly unused) __fh argument to ioctl handlers to fh.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: zoran: Remove zoran_fh structure

The zoran_fh structure is a wrapper around v4l2_fh. Its usage has been
mostly removed by commit 83f89a8bcbc3 ("media: zoran: convert to vb2"),
but the structure stayed by mistake. It is now used in a single
location, assigned from a void pointer and then recast to a void
pointer, without being every accessed. Drop it.

Fixes: 83f89a8bcbc3 ("media: zoran: convert to vb2")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: Drop V4L2_FL_USES_V4L2_FH checks

Now that all drivers use v4l2_fh, we can drop the V4L2_FL_USES_V4L2_FH
checks through the V4L2 core.

To ensure that all new drivers use v4l2_fh, keep setting the
V4L2_FL_USES_V4L2_FH flag in v4l2_fh_init(), and verify it is set after
the .open() file operation returns.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: v4l2-dev: Make open and release file operations mandatory

All V4L2 drivers implement the open and release file operations. As all
new drivers will need to use v4l2_fh, this situation won't change. Make
those two file operation mandatory at registration time. This allows
simplifying v4l2_open() and v4l2_release().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: v4l2-ctrls: Move v4l2_fh retrieval after V4L2_FL_USES_V4L2_FH check

The v4l2_ctrl_log_status() function retrieves the v4l2_fh from the file
with file_to_v4l2_fh() before checking the V4L2_FL_USES_V4L2_FH to see
if the device makes use of v4l2_fh. While this doesn't cause any
practical issue given the current implementation of file_to_v4l2_fh(),
it is cleaner to retrieve the v4l2_fh after checking the flag. This
could prevent future issues if the implementation of file_to_v4l2_fh()
changes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: staging: ipu7: isys: Don't set V4L2_FL_USES_V4L2_FH manually

The V4L2_FL_USES_V4L2_FH flag is set by v4l2_fh_init(). It is not meant
to be set manually by drivers. Drop it from the ipu7-isys driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: ipu6: isys: Don't set V4L2_FL_USES_V4L2_FH manually

The V4L2_FL_USES_V4L2_FH flag is set by v4l2_fh_init(). It is not meant
to be set manually by drivers. Drop it from the ipu6-isys driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: Reset file->private_data to NULL in v4l2_fh_del()

Multiple drivers that use v4l2_fh and call v4l2_fh_del() manually reset
the file->private_data pointer to NULL in their video device .release()
file operation handler. Move the code to the v4l2_fh_del() function to
avoid direct access to file->private_data in drivers. This requires
adding a file pointer argument to the function.

Changes to drivers have been generated with the following coccinelle
semantic patch:

@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- filp->private_data = NULL;
...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}

@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...
- filp->private_data = NULL;
...>
}

@@
expression fh;
identifier filp;
identifier release;
type ret;
@@
ret release(..., struct file *filp, ...)
{
<...
- v4l2_fh_del(fh);
+ v4l2_fh_del(fh, filp);
...>
}

Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_del() prototype and reset file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_del() function prototype
and its documentation.

Additionally, white space issues have been fixed manually in
drivers/usb/gadget/function/uvc_v4l2.c

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: Set file->private_data in v4l2_fh_add()

All the drivers that use v4l2_fh and call v4l2_fh_add() manually store a
pointer to the v4l2_fh instance in file->private_data in their video
device .open() file operation handler. Move the code to the
v4l2_fh_add() function to avoid direct access to file->private_data in
drivers. This requires adding a file pointer argument to the function.

Changes to drivers have been generated with the following coccinelle
semantic patch:

@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- filp->private_data = fh;
...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...>
}

@@
expression fh;
identifier filp;
identifier open;
type ret;
@@
ret open(..., struct file *filp, ...)
{
<...
- v4l2_fh_add(fh);
+ v4l2_fh_add(fh, filp);
...
- filp->private_data = fh;
...>
}

Manual changes have been applied to Documentation/ to update the usage
patterns, to drivers/media/v4l2-core/v4l2-fh.c to update the
v4l2_fh_add() prototype set file->private_data, and to
include/media/v4l2-fh.h to update the v4l2_fh_add() function prototype
and its documentation.

Additionally, white space issues have been fixed manually in
drivers/media/platform/nvidia/tegra-vde/v4l2.c,
drivers/media/platform/rockchip/rkvdec/rkvdec.c,
drivers/media/v4l2-core/v4l2-fh.c and
drivers/staging/most/video/video.c.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: qcom: venus: Pass file pointer to venus_close_common()

In preparation for a tree-wide rework automated with coccinelle that
will need to access a struct file pointer in the venus_close_common()
function, pass it from the callers. There is not functional change yet.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: qcom: iris: Drop unused argument to iris_get_inst()

The second argument to the iris_get_inst() function is never used. Drop
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: qcom: iris: Set file->private_data in iris_v4l2_fh_(de)init()

In preparation for a tree-wide rework automated with coccinelle that
will affect file->private_data, v4l2_fh_add() and v4l2_fh_del(), move
setting file->private_data from the callers to the iris_v4l2_fh_init()
and iris_v4l2_fh_deinit() functions. There is not functional change yet.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: qcom: iris: Pass file pointer to iris_v4l2_fh_(de)init()

In preparation for a tree-wide rework automated with coccinelle that
will need to access a struct file pointer in the iris_v4l2_fh_init() and
iris_v4l2_fh_deinit() functions, pass it from the callers. There is not
functional change yet.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: chips-media: wave5: Pass file pointer to wave5_cleanup_instance()

In preparation for a tree-wide rework automated with coccinelle that
will need to access a struct file pointer in the
wave5_cleanup_instance() function, pass it from the callers. There is
not functional change yet.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: camss: Remove custom .release fop()

The 'file->private_data' pointer is reset in the vb2_fop_release()
call path. For this reason a custom handler for the .release
file operation is not needed and the driver can use
vb2_fop_release() directly.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: camss: Replace .open() file operation with v4l2_fh_open()

The custom video_open() function in the camss driver open-codes the
v4l2_fh_open() helper, with an additional mutex that protects the whole
function. Given that the function does not modify any data guarded by
the lock, there's no need for using the mutex and the function can be
replaced by v4l2_fh_open().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: rzg2l-cru: Do not set file->private_data

The RZ G2/L CRU driver sets file->private_data to the driver-specific
structure, but the following call to v4l2_fh_open() overwrites it
with a pointer to the just allocated v4l2_fh.

Remove the mis-leading assignment in the driver.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: rcar-vin: Do not set file->private_data

The R-Car VIN driver sets file->private_data to the driver-specific
structure, but the following call to v4l2_fh_open() overwrites it
with a pointer to the just allocated v4l2_fh.

Remove the mis-leading assignment in the driver.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: v4l2-fh: Move piece of documentation to correct function

The paragraph in the v4l2_fh_del() documentation that indicates the
function sets filp->private_data was added in the wrong place. It is
meant for v4l2_fh_open(). Move it to where it belongs.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: visl: Drop visl_v4l2fh_to_ctx() function

The visl_v4l2fh_to_ctx() function is unused. Drop it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: amphion: Delete v4l2_fh synchronously in .release()

The v4l2_fh initialized and added in vpu_v4l2_open() is delete and
cleaned up when the last reference to the vpu_inst is released. This may
happen later than at vpu_v4l2_close() time.

Not deleting and cleaning up the v4l2_fh when closing the file handle to
the video device is not ideal, as the v4l2_fh will still be present in
the video device's fh_list, and will store a copy of events queued to
the video device. There may also be other side effects of keeping alive
an object that represents an open file handle after the file handle is
closed.

The v4l2_fh instance is embedded in the vpu_inst structure, and is
accessed in two different ways:

- in vpu_notify_eos() and vpu_notify_source_change(), to queue V4L2
  events to the file handle ; and

- through the driver to access the v4l2_fh.m2m_ctx pointer.

The v4l2_fh.m2m_ctx pointer is not touched by v4l2_fh_del() and
v4l2_fh_exit(). It is set to NULL by the driver when closing the file
handle, in vpu_v4l2_close().

The vpu_notify_eos() and vpu_notify_source_change() functions are called
in vpu_set_last_buffer_dequeued() and vdec_handle_resolution_change()
respectively, only if the v4l2_fh.m2m_ctx pointer is not NULL. There is
therefore a guarantee that no new event will be queued to the v4l2_fh
after vpu_v4l2_close() destroys the m2m_ctx.

The vpu_notify_eos() function is also called from vpu_vb2_buf_finish(),
which is guaranteed to be called for all queued buffers when
vpu_v4l2_close() calls v4l2_m2m_ctx_release(), and will not be called
later.

It is therefore safe to assume that the driver will not touch the
v4l2_fh, except to check the m2m_ctx pointer, after vpu_v4l2_close()
destroys the m2m_ctx. We can safely delete and cleanup the v4l2_fh
synchronously in vpu_v4l2_close().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: amphion: Make some vpu_v4l2 functions static

Some functions defined in vpu_v4l2.c are never used outside of that
compilation unit. Make them static.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

media: pci: ivtv: Don't create fake v4l2_fh

The ivtv driver has a structure named ivtv_open_id that models an open
file handle for the device. It embeds a v4l2_fh instance for file
handles that correspond to a V4L2 video device, and stores a pointer to
that v4l2_fh in struct ivtv_stream to identify which open file handle
owns a particular stream.

In addition to video devices, streams can be owned by ALSA PCM devices.
Those devices do not make use of the v4l2_fh instance for obvious
reasons, but the snd_ivtv_pcm_capture_open() function still initializes
a "fake" v4l2_fh for the sole purpose of using it as an open file handle
identifier. The v4l2_fh is not properly destroyed when the ALSA PCM
device is closed, leading to possible resource leaks.

Fortunately, the v4l2_fh instance pointed to by ivtv_stream is not
accessed, only the pointer value is used for comparison. Replace it with
a pointer to the ivtv_open_id structure that embeds the v4l2_fh, and
don't initialize the v4l2_fh for ALSA PCM devices.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>