Junio C Hamano [Mon, 31 Aug 2020 22:49:52 +0000 (15:49 -0700)]
Merge branch 'jk/rev-input-given-fix'
Feeding "$ZERO_OID" to "git log --ignore-missing --stdin", and
running "git log --ignore-missing $ZERO_OID" fell back to start
digging from HEAD; it has been corrected to become a no-op, like
"git log --tags=no-tag-matches-this-pattern" does.
* jk/rev-input-given-fix:
revision: set rev_input_given in handle_revision_arg()
Junio C Hamano [Mon, 31 Aug 2020 22:49:48 +0000 (15:49 -0700)]
Merge branch 'hn/refs-pseudorefs'
Accesses to two pseudorefs have been updated to properly use ref
API.
* hn/refs-pseudorefs:
sequencer: treat REVERT_HEAD as a pseudo ref
builtin/commit: suggest update-ref for pseudoref removal
sequencer: treat CHERRY_PICK_HEAD as a pseudo ref
refs: make refs_ref_exists public
Junio C Hamano [Mon, 31 Aug 2020 22:49:48 +0000 (15:49 -0700)]
Merge branch 'jk/index-pack-w-more-threads'
Long ago, we decided to use 3 threads by default when running the
index-pack task in parallel, which has been adjusted a bit upwards.
* jk/index-pack-w-more-threads:
index-pack: adjust default threading cap
p5302: count up to online-cpus for thread tests
p5302: disable thread-count parameter tests by default
The parser for "git for-each-ref --format=..." was too loose when
parsing the "%(trailers...)" atom, and forgot that "trailers" and
"trailers:<modifiers>" are the only two allowed forms, which has
been corrected.
* hv/ref-filter-trailers-atom-parsing-fix:
ref-filter: 'contents:trailers' show error if `:` is missing
t6300: unify %(trailers) and %(contents:trailers) tests
The output from the "diff" family of the commands had abbreviated
object names of blobs involved in the patch, but its length was not
affected by the --abbrev option. Now it is.
* dd/diff-customize-index-line-abbrev:
diff: index-line: respect --abbrev in object's name
t4013: improve diff-post-processor logic
brian m. carlson [Thu, 27 Aug 2020 22:35:27 +0000 (22:35 +0000)]
po: add missing letter for French message
Add the missing "e" in "de". While it is possible in French to omit it,
that only occurs with an apostrophe and only when the next word starts
with a vowel or mute h, which is not the case here.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Acked-by: Jean-Noël Avila <jn.avila@free.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 27 Aug 2020 21:04:49 +0000 (14:04 -0700)]
Merge branch 'hn/refs-fetch-head-is-special'
The FETCH_HEAD is now always read from the filesystem regardless of
the ref backend in use, as its format is much richer than the
normal refs, and written directly by "git fetch" as a plain file..
* hn/refs-fetch-head-is-special:
refs: read FETCH_HEAD and MERGE_HEAD generically
refs: move gitdir into base ref_store
refs: fix comment about submodule ref_stores
refs: split off reading loose ref data in separate function
Junio C Hamano [Thu, 27 Aug 2020 21:04:49 +0000 (14:04 -0700)]
Merge branch 'rz/complete-more-options'
Command line completion (in contrib/) usually omits redundant,
deprecated and/or dangerous options from its output; it learned to
optionally include all of them.
* rz/complete-more-options:
completion: add GIT_COMPLETION_SHOW_ALL env var
parse-options: add --git-completion-helper-all
Junio C Hamano [Thu, 27 Aug 2020 21:04:49 +0000 (14:04 -0700)]
Merge branch 'jk/leakfix'
Code clean-up.
* jk/leakfix:
submodule--helper: fix leak of core.worktree value
config: fix leak in git_config_get_expiry_in_days()
config: drop git_config_get_string_const()
config: fix leaks from git_config_get_string_const()
checkout: fix leak of non-existent branch names
submodule--helper: use strbuf_release() to free strbufs
clear_pattern_list(): clear embedded hashmaps
Junio C Hamano [Thu, 27 Aug 2020 21:04:48 +0000 (14:04 -0700)]
Merge branch 'en/mem-pool'
API update.
* en/mem-pool:
mem-pool: use consistent pool variable name
mem-pool: use more standard initialization and finalization
mem-pool: add convenience functions for strdup and strndup
Jeff King [Wed, 26 Aug 2020 20:13:05 +0000 (16:13 -0400)]
revision: set rev_input_given in handle_revision_arg()
Commit 7ba826290a (revision: add rev_input_given flag, 2017-08-02) added
a flag to rev_info to tell whether we got any revision arguments. As
explained there, this is necessary because some revision arguments may
not produce any pending traversal objects, but should still inhibit
default behaviors (e.g., a glob that matches nothing).
However, it only set the flag in the globbing code, but not for
revisions we get on the command-line or via stdin. This leads to two
problems:
- the command-line code keeps its own separate got_rev_arg flag; this
isn't wrong, but it's confusing and an extra maintenance burden
- even specifically-named rev arguments might end up not adding any
pending objects: if --ignore-missing is set, then specifying a
missing object is a noop rather than an error.
And that leads to some user-visible bugs:
- when deciding whether a default rev like "HEAD" should kick in, we
check both got_rev_arg and rev_input_given. That means that
"--ignore-missing $ZERO_OID" works on the command-line (where we set
got_rev_arg) but not on --stdin (where we don't)
- when rev-list decides whether it should complain that it wasn't
given a starting point, it relies on rev_input_given. So it can't
even get the command-line "--ignore-missing $ZERO_OID" right
Let's consistently set the flag if we got any revision argument. That
lets us clean up the redundant got_rev_arg, and fixes both of those bugs
(but note there are three new tests: we'll confirm the already working
git-log command-line case).
A few implementation notes:
- conceptually we want to set the flag whenever handle_revision_arg()
finds an actual revision arg ("handles" it, you might say). But it
covers a ton of cases with early returns. Rather than annotating
each one, we just wrap it and use its success exit-code to set the
flag in one spot.
- the new rev-list test is in t6018, which is titled to cover globs.
This isn't exactly a glob, but it made sense to stick it with the
other tests that handle the "even though we got a rev, we have no
pending objects" case, which are globs.
- the tests check for the oid of a missing object, which it's pretty
clear --ignore-missing should ignore. You can see the same behavior
with "--ignore-missing a-ref-that-does-not-exist", because
--ignore-missing treats them both the same. That's perhaps less
clearly correct, and we may want to change that in the future. But
the way the code and tests here are written, we'd continue to do the
right thing even if it does.
Reported-by: Bryan Turner <bturner@atlassian.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 24 Aug 2020 21:54:31 +0000 (14:54 -0700)]
Merge branch 'rs/more-buffered-io'
Use more buffered I/O where we used to call many small write(2)s.
* rs/more-buffered-io:
upload-pack: use buffered I/O to talk to rev-list
midx: use buffered I/O to talk to pack-objects
connected: use buffered I/O to talk to rev-list
Junio C Hamano [Mon, 24 Aug 2020 21:54:28 +0000 (14:54 -0700)]
Merge branch 'ds/midx-repack-to-batch-size'
The "--batch-size" option of "git multi-pack-index repack" command
is now used to specify that very small packfiles are collected into
one until the total size roughly exceeds it.
The purpose of "git init --separate-git-dir" is to initialize a
new project with the repository separate from the working tree,
or, in the case of an existing project, to move the repository
(the .git/ directory) out of the working tree. It does not make
sense to use --separate-git-dir with a bare repository for which
there is no working tree, so disallow its use with bare
repositories.
* es/init-no-separate-git-dir-in-bare:
init: disallow --separate-git-dir with bare repository
René Scharfe [Sat, 22 Aug 2020 08:57:59 +0000 (10:57 +0200)]
checkout, restore: make pathspec recursive
The pathspec given to git checkout and git restore is used with both
tree_entry_interesting (via read_tree_recursive) and match_pathspec
(via ce_path_match). The latter effectively only supports recursive
matching regardless of the value of the pathspec flag "recursive",
which is unset here.
That causes different match results for pathspecs with wildcards, and
can lead checkout and restore in no-overlay mode to remove entries
instead of modifying them. Enable recursive matching for both checkout
and restore to make matching consistent.
Setting the flag in checkout_main() technically also affects git switch,
but since that command doesn't accept pathspecs at all this has no
actual consequence.
Reported-by: Sergii Shkarnikov <sergii.shkarnikov@globallogic.com> Initial-test-by: Sergii Shkarnikov <sergii.shkarnikov@globallogic.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 21 Aug 2020 20:36:28 +0000 (13:36 -0700)]
ident: say whose identity is missing when giving user.name hint
If `user.name` and `user.email` have not been configured and the
user invokes:
git commit --author=...
without specifying the committer identity, then Git errors out with
a message asking the user to configure `user.name` and `user.email`
but doesn't tell the user which attribution was missing. This can be
confusing for a user new to Git who isn't aware of the distinction
between user, author, and committer.
Give such users a bit more help by extending the error message to
also say which attribution is expected.
diff: index-line: respect --abbrev in object's name
A handful of Git's commands respect `--abbrev' for customizing length
of abbreviation of object names.
For diff-family, Git supports 2 different options for 2 different
purposes, `--full-index' for showing diff-patch object's name in full,
and `--abbrev' to customize the length of object names in diff-raw and
diff-tree header lines, without any options to customise the length of
object names in diff-patch format. When working with diff-patch format,
we only have two options, either full index, or default abbrev length.
Although, that behaviour is documented, it doesn't stop users from
trying to use `--abbrev' with the hope of customising diff-patch's
objects' name's abbreviation.
Let's allow the blob object names shown on the "index" line to be
abbreviated to arbitrary length given via the "--abbrev" option.
To preserve backward compatibility with old script that specify both
`--full-index' and `--abbrev', always show full object id
if `--full-index' is specified.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Fri, 21 Aug 2020 11:51:46 +0000 (18:51 +0700)]
t4013: improve diff-post-processor logic
From 72f936b1 (t4013: make test hash independent, 2020-02-07),
we started to adjust metadata of git-diff's output in order to
ignore uninteresting metadata which is dependent of underlying hash
algorithm.
However, we forgot to special case all-zero object names, which is
special for missing objects, in consequence, we could't catch
possible future bugs where object names is all-zeros including but
not limited to:
* show intend-to-add entry
* deleted entry
* diff between index and working tree with new file
We also mistakenly munged file-modes as if they were object names
abbreviated to 6 hexadecimal digits.
In addition, in the upcoming change, we would like to test for
customizing the length of abbreviated blob objects on the index line,
which is not supported by current diff-processor logic.
Let's fix the bug for all-zero object names, and file modes.
While we're at it, support abbreviation of object names up to 16 bytes.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adrian Moennich [Fri, 21 Aug 2020 09:27:26 +0000 (09:27 +0000)]
ci: fix inconsistent indentation
While YAML allows different indentation styles as long as each block
is consistent, it is rather unusual to mix different indentations in
a single file. Adjust to use two-space indentation everywhere.
Signed-off-by: Adrian Moennich <adrian@planetcoding.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 21 Aug 2020 17:58:00 +0000 (13:58 -0400)]
index-pack: adjust default threading cap
Commit b8a2486f15 (index-pack: support multithreaded delta resolving,
2012-05-06) describes an experiment that shows that setting the number
of threads for index-pack higher than 3 does not help.
I repeated that experiment using a more modern version of Git and a more
modern CPU and got different results.
Here are timings for p5302 against linux.git run on my laptop, a Core
i9-9880H with 8 cores plus hyperthreading (so online-cpus returns 16):
You can see that wall-clock times continue to improve dramatically up to
the number of cores, but bumping beyond that (into hyperthreading
territory) does not help (and in fact hurts a little).
Here's the same experiment on a machine with dual Xeon 6230's, totaling
40 cores (80 with hyperthreading):
The results are similar; things stop improving at 40 threads. Curiously,
going from 20 to 40 really doesn't help much, either (and increases CPU
time considerably). So that may represent an actual barrier to
parallelism, where we lose out due to context-switching and loss of
cache locality, but don't reap the wall-clock benefits due to contention
of our coarse-grained locks.
So what's a good default value? It's clear that the current cap of 3 is
too low; our default values are 42% and 57% slower than the best times
on each machine. The results on the 40-core machine imply that 20
threads is an actual barrier regardless of the number of cores, so we'll
take that as a maximum. We get the best results on these machines at
half of the online-cpus value. That's presumably a result of the
hyperthreading. That's common on multi-core Intel processors, but not
necessarily elsewhere. But if we take it as an assumption, we can
perform optimally on hyperthreaded machines and still do much better
than the status quo on other machines, as long as we never half below
the current value of 3.
So that's what this patch does.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 21 Aug 2020 17:54:51 +0000 (13:54 -0400)]
p5302: count up to online-cpus for thread tests
When PERF_EXTRA is enabled, p5302 checks the performance of index-pack
with various numbers of threads. This can be useful for deciding what
the default should be (which is currently capped at 3 threads based on
the results of this script).
However, we only go up to 8 threads, and modern machines may have more.
Let's get the number of CPUs from test-tool, and test various numbers of
threads between one and that maximum.
Note that the current tests aren't all identical, as we have to set
GIT_FORCE_THREADS for the --threads=1 test (which measures the overhead
of starting a single worker thread versus the "0" case of using the main
thread). To keep the loop simple, we'll keep the "0" case out of it, and
set GIT_FORCE_THREADS=1 for all of the other cases (it's a noop for all
but the "1" case, since numbers higher than 1 would always need
threads).
Note also that we could skip running "test-tool" if PERF_EXTRA isn't
set. However, there's some small value in knowing the number of threads,
so that we can mark each test as skipped in the output.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 21 Aug 2020 17:53:39 +0000 (13:53 -0400)]
p5302: disable thread-count parameter tests by default
The primary function of the perf suite is to detect regressions (or
improvements) between versions of Git. The only numbers we show a direct
comparison for are timings between the same test run on two different
versions.
However, it can sometimes be used to collect other information. For
instance, p5302 runs the same index-pack operation with different thread
counts. The output doesn't directly compare these, but anybody
interested in working on index-pack can manually compare the results.
For a normal regression run of the full perf-suite, though, this incurs
a significant cost to generate numbers nobody will actually look at;
about 25% of the total time of the test suite is spent in p5302. And the
low-thread-count runs are the most expensive part of it, since they're
(unsurprisingly) not using as many threads.
Let's skip these tests by default, but make it possible for people
working on index-pack to still run them by setting an environment
variable. Rather than make this specific to p5302, let's introduce a
generic mechanism. This makes it possible to run the full suite with
every possible test if somebody really wants to burn some CPU.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Han-Wen Nienhuys [Fri, 21 Aug 2020 16:59:36 +0000 (16:59 +0000)]
builtin/commit: suggest update-ref for pseudoref removal
When pseudorefs move to a different ref storage mechanism, pseudorefs no longer
can be removed with 'rm'. Instead, suggest a "update-ref -d" command, which will
work regardless of ref storage backend.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Raymond E. Pasco [Thu, 20 Aug 2020 23:10:51 +0000 (19:10 -0400)]
git-apply.txt: update descriptions of --cached, --index
The blurb for "--cached" says it implies "--index", but in reality
"--cached" and "--index" are distinct modes with different behavior.
Additionally, the descriptions of "--index" and "--cached" are somewhat
unclear about what might be modified, and what "--index" looks for to
determine that the index and working copy "match".
Rewrite the blurbs for both options for clarity and accuracy.
Signed-off-by: Raymond E. Pasco <ray@ameretat.dev> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Thu, 20 Aug 2020 17:51:16 +0000 (10:51 -0700)]
fetch-pack: in partial clone, pass --promisor
When fetching a pack from a promisor remote, the corresponding .promisor
file needs to be created. "fetch-pack" originally did this by passing
"--promisor" to "index-pack", but in 5374a290aa ("fetch-pack: write
fetched refs to .promisor", 2019-10-16), "fetch-pack" was taught to do
this itself instead, because it needed to store ref information in the
.promisor file.
This causes a problem with superprojects when transfer.fsckobjects is
set, because in the current implementation, it is "index-pack" that
calls fsck_finish() to check the objects; before 5374a290aa,
fsck_finish() would see that .gitmodules is a promisor object and
tolerate it being missing, but after, there is no .promisor file (at the
time of the invocation of fsck_finish() by "index-pack") to tell it that
.gitmodules is a promisor object, so it returns an error.
Therefore, teach "fetch-pack" to pass "--promisor" to index pack once
again. "fetch-pack" will subsequently overwrite this file with the ref
information.
An alternative is to instead move object checking to "fetch-pack", and
let "index-pack" only index the files. However, since "index-pack" has
to inflate objects in order to index them, it seems reasonable to also
let it check the objects (which also require inflated files).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ryan Zoeller [Wed, 19 Aug 2020 23:06:08 +0000 (23:06 +0000)]
parse-options: add --git-completion-helper-all
--git-completion-helper excludes hidden options, such as --allow-empty
for git commit. This is typically helpful, but occasionally we want
auto-completion for obscure flags. --git-completion-helper-all returns
all options, even if they are marked as hidden or nocomplete.
Signed-off-by: Ryan Zoeller <rtzoeller@rtzoeller.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 19 Aug 2020 23:14:52 +0000 (16:14 -0700)]
Merge branch 'ma/sha-256-docs'
Further update of docs to adjust to the recent SHA-256 work.
* ma/sha-256-docs:
shallow.txt: document SHA-256 shallow format
protocol-capabilities.txt: clarify "allow-x-sha1-in-want" re SHA-256
index-format.txt: document SHA-256 index format
http-protocol.txt: document SHA-256 "want"/"have" format
Junio C Hamano [Wed, 19 Aug 2020 23:14:49 +0000 (16:14 -0700)]
Merge branch 'jk/blame-coalesce-fix'
When given more than one target line ranges, "git blame -La,b
-Lc,d" was over-eager to coalesce groups of original lines and
showed incorrect results, which has been corrected.
* jk/blame-coalesce-fix:
blame: only coalesce lines that are adjacent in result
t8003: factor setup out of coalesce test
t8003: check output of coalesced blame
Junio C Hamano [Wed, 19 Aug 2020 23:14:43 +0000 (16:14 -0700)]
Merge branch 'en/merge-tests'
Updates to "git merge" tests, in preparation for a new merge
strategy backend.
* en/merge-tests:
t6425: be more flexible with rename/delete conflict messages
t642[23]: be more flexible for add/add conflicts involving pair renames
t6422, t6426: be more flexible for add/add conflicts involving renames
t6423: add an explanation about why one of the tests does not pass
t6416, t6423: clarify some comments and fix some typos
t6422: fix multiple errors with the mod6 test expectations
t6423: fix test setup for a couple tests
t6416, t6422: fix incorrect untracked file count
t6422: fix bad check against missing file
t6418: tighten delete/normalize conflict testcase
Collect merge-related tests to t64xx
Han-Wen Nienhuys [Wed, 19 Aug 2020 14:27:58 +0000 (14:27 +0000)]
refs: read FETCH_HEAD and MERGE_HEAD generically
The FETCH_HEAD and MERGE_HEAD refs must be stored in a file, regardless of the
type of ref backend. This is because they can hold more than just a single ref.
To accomodate them for alternate ref backends, read them from a file generically
in refs_read_raw_ref()
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 18 Aug 2020 22:58:26 +0000 (22:58 +0000)]
dir: fix problematic API to avoid memory leaks
The dir structure seemed to have a number of leaks and problems around
it. First I noticed that parent_hashmap and recursive_hashmap were
being leaked (though Peff noticed and submitted fixes before me). Then
I noticed in the previous commit that clear_directory() was only taking
responsibility for a subset of fields within dir_struct, despite the
fact that entries[] and ignored[] we allocated internally to dir.c.
That, of course, resulted in many callers either leaking or haphazardly
trying to free these arrays and their contents.
Digging further, I found that despite the pretty clear documentation
near the top of dir.h that folks were supposed to call clear_directory()
when the user no longer needed the dir_struct, there were four callers
that didn't bother doing that at all. However, two of them clearly
thought about leaks since they had an UNLEAK(dir) directive, which to me
suggests that the method to free the data was too unclear. I suspect
the non-obviousness of the API and its holes led folks to avoid it,
which then snowballed into further problems with the entries[],
ignored[], parent_hashmap, and recursive_hashmap problems.
Rename clear_directory() to dir_clear() to be more in line with other
data structures in git, and introduce a dir_init() to handle the
suggested memsetting of dir_struct to all zeroes. I hope that a name
like "dir_clear()" is more clear, and that the presence of dir_init()
will provide a hint to those looking at the code that they need to look
for either a dir_clear() or a dir_free() and lead them to find
dir_clear().
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Tue, 18 Aug 2020 22:58:25 +0000 (22:58 +0000)]
dir: make clear_directory() free all relevant memory
The calling convention for the dir API is supposed to end with a call to
clear_directory() to free up no longer needed memory. However,
clear_directory() didn't free dir->entries or dir->ignored. I believe
this was an oversight, but a number of callers noticed memory leaks and
started free'ing these. Unfortunately, they did so somewhat haphazardly
(sometimes freeing the entries in the arrays, and sometimes only
free'ing the arrays themselves). This suggests the callers weren't
trying to make sure any possible memory used might be free'd, but just
the memory they noticed their usecase definitely had allocated.
Fix this mess by moving all the duplicated free'ing logic into
clear_directory(). End by resetting dir to a pristine state so it could
be reused if desired.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Tue, 18 Aug 2020 22:08:54 +0000 (00:08 +0200)]
patch-id: ignore newline at end of file in diff_flush_patch_id()
Whitespace is ignored when calculating patch IDs. This is done by
removing all whitespace from diff lines before hashing them, including
a newline at the end of a file. If that newline is missing, however,
diff reports that fact in a separate line containing "\ No newline at
end of file\n", and this marker is hashed like a context line.
This goes against our goal of making patch IDs independent of
whitespace. Use the same heuristic that 2485eab55cc (git-patch-id: do
not trip over "no newline" markers, 2011-02-17) added to git patch-id
instead and skip diff lines that start with a backslash and a space
and are longer than twelve characters.
Reported-by: Tilman Vogel <tilman.vogel@web.de> Initial-test-by: Tilman Vogel <tilman.vogel@web.de> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you run fetch but record the result in remote-tracking branches,
and either if you do nothing with the fetched refs (e.g. you are
merely mirroring) or if you always work from the remote-tracking
refs (e.g. you fetch and then merge origin/branchname separately),
you can get away with having no FETCH_HEAD at all.
Teach "git fetch" a command line option "--[no-]write-fetch-head".
The default is to write FETCH_HEAD, and the option is primarily
meant to be used with the "--no-" prefix to override this default,
because there is no matching fetch.writeFetchHEAD configuration
variable to flip the default to off (in which case, the positive
form may become necessary to defeat it).
Note that under "--dry-run" mode, FETCH_HEAD is never written;
otherwise you'd see list of objects in the file that you do not
actually have. Passing `--write-fetch-head` does not force `git
fetch` to write the file.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Aug 2020 17:37:57 +0000 (17:37 +0000)]
mem-pool: use consistent pool variable name
About half the function declarations in mem-pool.h used 'struct mem_pool
*pool', while the other half used 'struct mem_pool *mem_pool'. Make the
code a bit more consistent by just using 'pool' in preference to
'mem_pool' everywhere.
No behavioral changes included; this is just a mechanical rename (though
a line or two was rewrapped as well).
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Aug 2020 17:37:56 +0000 (17:37 +0000)]
mem-pool: use more standard initialization and finalization
A typical memory type, such as strbuf, hashmap, or string_list can be
stored on the stack or embedded within another structure. mem_pool
cannot be, because of how mem_pool_init() and mem_pool_discard() are
written. mem_pool_init() does essentially the following (simplified
for purposes of explanation here):
It seems weird to require that mem_pools can only be accessed through a
pointer. It also seems slightly dangerous: unlike strbuf_release() or
strbuf_reset() or string_list_clear(), all of which put the data
structure into a state where it can be re-used after the call,
mem_pool_discard(pool) will leave pool pointing at free'd memory.
read-cache (and split-index) are the only current users of mem_pools,
and they haven't fallen into a use-after-free mistake here, but it seems
likely to be problematic for future users especially since several of
the current callers of mem_pool_init() will only call it when the
mem_pool* is not already allocated (i.e. is NULL).
This type of mechanism also prevents finding synchronization
points where one can free existing memory and then resume more
operations. It would be natural at such points to run something like
mem_pool_discard(pool...);
and, if necessary,
mem_pool_init(&pool...);
and then carry on continuing to use the pool. However, this fails badly
if several objects had a copy of the value of pool from before these
commands; in such a case, those objects won't get the updated value of
pool that mem_pool_init() overwrites pool with and they'll all instead
be reading and writing from free'd memory.
Modify mem_pool_init()/mem_pool_discard() to behave more like
strbuf_init()/strbuf_release()
or
string_list_init()/string_list_clear()
In particular: (1) make mem_pool_init() just take a mem_pool* and have
it only worry about allocating struct mp_blocks, not the struct mem_pool
itself, (2) make mem_pool_discard() free the memory that the pool was
responsible for, but leave it in a state where it can be used to
allocate more memory afterward (without the need to call mem_pool_init()
again).
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sat, 15 Aug 2020 17:37:55 +0000 (17:37 +0000)]
mem-pool: add convenience functions for strdup and strndup
fast-import had a special mem_pool_strdup() convenience function that I
want to be able to use from the new merge algorithm I am writing. Move
it from fast-import to mem-pool, and also add a mem_pool_strndup()
while at it that I also want to use.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 18 Aug 2020 00:02:49 +0000 (17:02 -0700)]
Merge branch 'so/log-diff-merges-opt'
Earlier, to countermand the implicit "-m" option when the
"--first-parent" option is used with "git log", we added the
"--[no-]diff-merges" option in the jk/log-fp-implies-m topic. To
leave the door open to allow the "--diff-merges" option to take
values that instructs how patches for merge commits should be
computed (e.g. "cc"? "-p against first parent?"), redefine
"--diff-merges" to take non-optional value, and implement "off"
that means the same thing as "--no-diff-merges".
* so/log-diff-merges-opt:
t/t4013: add test for --diff-merges=off
doc/git-log: describe --diff-merges=off
revision: change "--diff-merges" option to require parameter
Junio C Hamano [Tue, 18 Aug 2020 00:02:49 +0000 (17:02 -0700)]
Merge branch 'jk/log-fp-implies-m'
"git log --first-parent -p" showed patches only for single-parent
commits on the first-parent chain; the "--first-parent" option has
been made to imply "-m". Use "--no-diff-merges" to restore the
previous behaviour to omit patches for merge commits.
* jk/log-fp-implies-m:
doc/git-log: clarify handling of merge commit diffs
doc/git-log: move "-t" into diff-options list
doc/git-log: drop "-r" diff option
doc/git-log: move "Diff Formatting" from rev-list-options
log: enable "-m" automatically with "--first-parent"
revision: add "--no-diff-merges" option to counteract "-m"
log: drop "--cc implies -m" logic
Junio C Hamano [Tue, 18 Aug 2020 00:02:46 +0000 (17:02 -0700)]
Merge branch 'rp/apply-cached-with-i-t-a'
Recent versions of "git diff-files" shows a diff between the index
and the working tree for "intent-to-add" paths as a "new file"
patch; "git apply --cached" should be able to take "git diff-files"
and should act as an equivalent to "git add" for the path, but the
command failed to do so for such a path.
* rp/apply-cached-with-i-t-a:
t4140: test apply with i-t-a paths
apply: make i-t-a entries never match worktree
apply: allow "new file" patches on i-t-a entries
Junio C Hamano [Tue, 18 Aug 2020 00:02:44 +0000 (17:02 -0700)]
Merge branch 'jc/noop-with-static-inline'
A no-op replacement function implemented as a C preprocessor macro
does not perform as good a job as one implemented as a "static
inline" function in catching errors in parameters; replace the
former with the latter in <git-compat-util.h> header.
* jc/noop-with-static-inline:
compat-util: type-check parameters of no-op replacement functions
Junio C Hamano [Tue, 18 Aug 2020 00:02:42 +0000 (17:02 -0700)]
Merge branch 'hn/reftable-prep-part-2'
Further preliminary change to refs API.
* hn/reftable-prep-part-2:
Make HEAD a PSEUDOREF rather than PER_WORKTREE.
Modify pseudo refs through ref backend storage
t1400: use git rev-parse for testing PSEUDOREF existence
Junio C Hamano [Tue, 18 Aug 2020 00:02:40 +0000 (17:02 -0700)]
Merge branch 'ps/ref-transaction-hook'
The logic to find the ref transaction hook script attempted to
cache the path to the found hook without realizing that it needed
to keep a copied value, as the API it used returned a transitory
buffer space. This has been corrected.
Derrick Stolee [Mon, 17 Aug 2020 14:04:48 +0000 (14:04 +0000)]
multi-pack-index: use hash version byte
Similar to the commit-graph format, the multi-pack-index format has a
byte in the header intended to track the hash version used to write the
file. This allows one to interpret the hash length without having the
context of the repository config specifying the hash length. This was
not modified as part of the SHA-256 work because the hash length was
automatically up-shifted due to that config.
Since we have this byte available, we can make the file formats more
obviously incompatible instead of relying on other context from the
repository.
Add a new oid_version() method in midx.c similar to the one in
commit-graph.c. This is specifically made separate from that
implementation to avoid artificially linking the formats.
The test impact requires a few more things than the corresponding change
in the commit-graph format. Specifically, 'test-tool read-midx' was not
writing anything about this header value to output. Since the value
available in 'struct multi_pack_index' is hash_len instead of a version
value, we output "20" or "32" instead of "1" or "2".
Since we want a user to not have their Git commands fail if their
multi-pack-index has the incorrect hash version compared to the
repository's hash version, we relax the die() to an error() in
load_multi_pack_index(). This has some effect on 'git multi-pack-index
verify' as we need to check that a failed parse of a file that exists is
actually a verify error. For that test that checks the hash version
matches, we change the corrupted byte from "2" to "3" to ensure the test
fails for both hash algorithms.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 17 Aug 2020 14:04:47 +0000 (14:04 +0000)]
commit-graph: use the "hash version" byte
The commit-graph format reserved a byte among the header of the file to
store a "hash version". During the SHA-256 work, this was not modified
because file formats are not necessarily intended to work across hash
versions. If a repository has SHA-256 as its hash algorithm, it
automatically up-shifts the lengths of object names in all necessary
formats.
However, since we have this byte available for adjusting the version, we
can make the file formats more obviously incompatible instead of relying
on other context from the repository.
Update the oid_version() method in commit-graph.c to add a new value, 2,
for sha-256. This automatically writes the new value in a SHA-256
repository _and_ verifies the value is correct. This is a breaking
change relative to the current 'master' branch since 092b677 (Merge
branch 'bc/sha-256-cvs-svn-updates', 2020-08-13) but it is not breaking
relative to any released version of Git.
The test impact is relatively minor: the output of 'test-tool
read-graph' lists the header information, so those instances of '1' need
to be replaced with a variable determined by GIT_TEST_DEFAULT_HASH. A
more careful test is added that specifically creates a repository of
each type then swaps the commit-graph files. The important value here is
that the "git log" command succeeds while writing a message to stderr.
Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Mon, 17 Aug 2020 14:04:46 +0000 (14:04 +0000)]
t/README: document GIT_TEST_DEFAULT_HASH
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 17 Aug 2020 21:33:16 +0000 (17:33 -0400)]
submodule--helper: fix leak of core.worktree value
In the ensure_core_worktree() function, we load the core.worktree value
of the submodule repository using repo_config_get_string(). This
function copies the string, but we never free it, leaking the memory.
We can instead use the "tmp" version of that function to avoid the
allocation at all. We don't have to worry about lifetime issues, since
we never even look at the value (we just want to know if it's set).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 17 Aug 2020 21:33:13 +0000 (17:33 -0400)]
config: fix leak in git_config_get_expiry_in_days()
We use git_config_get_string() to retrieve the expiry value in a newly
allocated string. But after parsing it, we never free it, leaking the
memory.
We could fix this with a free() obviously, but there's an even better
solution: we can use the non-allocating "tmp" variant of the function;
we only need it to be valid for the lifetime of our parse function.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 17 Aug 2020 21:33:11 +0000 (17:33 -0400)]
config: drop git_config_get_string_const()
As evidenced by the leak fixes in the previous commit, the "const" in
git_config_get_string_const() clearly misleads people into thinking that
it does not allocate a copy of the string. We can fix this by renaming
it, but it's easier still to just drop it. Of the four remaining
callers:
- The one in git_config_parse_expiry() still needs to allocate, since
that's what its callers expect. We can just use the non-const
version and cast our pointer. Slightly ugly, but the damage is
contained in one spot.
- The two in apply are writing to global "const char *" variables, and
need to continue allocating. We often mark these as const because we
assign default string literals to them. But in this case we don't do
that, so we can just declare them as real "char *" pointers and use
the non-const version.
- The call in checkout doesn't actually need a copy; it can just use
the non-allocating "tmp" version of the function.
The function is also mentioned in the MyFirstContribution document. We
can swap that call out for the non-allocating "tmp" variant, which fits
well in the example given.
We'll drop the "configset" and "repo" variants, as well (which are
unused).
Note that this frees up the "const" name, so we could rename the "tmp"
variant back to that. But let's give some time for topics in flight to
adapt to the new code before doing so (if we do it too soon, the
function semantics will change but the compiler won't alert us).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff Hostetler [Mon, 17 Aug 2020 10:37:02 +0000 (10:37 +0000)]
mingw: improve performance of mingw_unlink()
Update mingw_unlink() to first try to delete the file with existing
permissions before trying to force it.
Windows throws an error when trying to delete a read-only file. The
mingw_unlink() compatibility wrapper always tries to _wchmod(666) the
file before calling _wunlink() to avoid that error. However, since
most files in the worktree are already writable, this is usually
wasted effort.
Update mingw_unlink() to just call DeleteFileW() directly and if that
succeeds return. If that fails, fall back into the existing code path
to update the permissions and use _wunlink() to get the existing
error code mapping.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>