Harry Wentland [Fri, 31 Jan 2025 16:57:49 +0000 (11:57 -0500)]
drm/amd/display: Don't treat wb connector as physical in create_validate_stream_for_sink
Don't try to operate on a drm_wb_connector as an amdgpu_dm_connector.
While dereferencing aconnector->base will "work" it's wrong and
might lead to unknown bad things. Just... don't.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ovidiu Bunea [Mon, 3 Feb 2025 20:43:32 +0000 (15:43 -0500)]
drm/amd/display: Exit idle optimizations before accessing PHY
[why & how]
By default, DCN HW is in idle optimized state which does not allow access
to PHY registers. If BIOS powers up the DCN, it is fine because they will
power up everything. Only exit idle optimized state when not taking control
from VBIOS.
Fixes: be704e5ef4bd ("Revert "drm/amd/display: Exit idle optimizations before attempt to access PHY"") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asad Kamal [Fri, 14 Feb 2025 05:54:01 +0000 (13:54 +0800)]
drm/amd/pm: Limit jpeg rings as per max for jpeg_v_4_0_3
Since pmfw supports for smuv13_0_6 is limited to 8 jpeg rings per instance,
which is the max for jpeg_v_4_0_3. Limit it to same to avoid out
of bound access.
Fixes: 568199a5c7a9 ("drm/amd/pm: Limit to 8 jpeg rings per instance") Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tao Zhou [Wed, 22 Jan 2025 08:55:51 +0000 (16:55 +0800)]
drm/amdgpu: add RAS CPER ring buffer
And initialize it, this is a pure software ring to store RAS CPER data.
v2: change ring size to 0x100000
v2: update the initialization of count_dw of cper ring, it's dword
variable
v3: skip VM inv eng for cper
v3: init/fini when aca enabled
Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Xiang Liu <xiang.liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 2563391e57b5 ("drm/amd/display: DML2.1 resynchronization") blew
away the compiler warning fix from commit 2fde4fdddc1f
("drm/amd/display: Avoid -Wenum-float-conversion in
add_margin_and_round_to_dfs_grainularity()"), causing the warning to
reappear.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:183:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion]
183 | divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Hawking Zhang [Tue, 11 Feb 2025 11:54:05 +0000 (19:54 +0800)]
drm/amdgpu: Generate cper records
Encode the error information in CPER format and commit
to the cper ring
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Yang Wang <keivnyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Wed, 29 Jan 2025 17:37:30 +0000 (12:37 -0500)]
drm/amdkfd: Fix user queue validation on Gfx7/8
To workaround queue full h/w issue on Gfx7/8, when application create
AQL queue, the ring buffer bo allocate size is queue_size/2 and
map queue_size ring buffer to GPU in 2 pieces using 2 attachments, each
attachment map size is queue_size/2, with same ring_bo backing memory.
For Gfx7/8, user queue buffer validation should use queue_size/2 to
verify ring_bo allocation and mapping size.
Fixes: 68e599db7a54 ("drm/amdkfd: Validate user queue buffers") Suggested-by: Tomáš Trnka <trnka@scm.com> Signed-off-by: Philip Yang <Philip.Yang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Sun, 26 Jan 2025 09:15:48 +0000 (17:15 +0800)]
drm/amdgpu: Introduce funcs for generating cper record
Introduce new functions that are used to generate
cper ue or ce records.
v2: return -ENOMEM instead of false
v2: check return value of fill section function
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Xiang Liu <xiang.liu@amd.com> Reviewed-by: Yang Wang <keivnyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Sun, 26 Jan 2025 08:32:57 +0000 (16:32 +0800)]
drm/amdgpu: Include ACA error type in aca bank
ACA error types managed by driver a direct 1:1
correspondence with those managed by firmware.
To address this, for each ACA bank, include
both the ACA error type and the ACA SMU type.
This addition is useful for creating CPER records.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Yang Wang <keivnyang.wang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Candice Li [Tue, 11 Feb 2025 01:58:24 +0000 (09:58 +0800)]
drm/amdgpu: Optimize the enablement of GECC
Enable GECC only when the default memory ECC mode or
the module parameter amdgpu_ras_enable is activated.
v2: Add kernel message to remind users explicitly set
amdgpu_ras_enable=1 before driver loading to enable GECC
and set amdgpu_ras_enable=0 to disable GECC when GECC is
currently enabled if needed.
Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Rename VCN clock gating function for consistency
Change the function name from vcn_v2_5_enable_clock_gating_inst
to vcn_v2_5_enable_clock_gating to ensure consistency in naming.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:781: warning: expecting prototype for vcn_v2_5_enable_clock_gating_inst(). Prototype was for vcn_v2_5_enable_clock_gating() instead
Cc: Leo Liu <leo.liu@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 10 Feb 2025 22:45:14 +0000 (17:45 -0500)]
drm/amdgpu/vcn5.0.1: use correct dpm helper
The VCN and UVD helpers were split in
commit ff69bba05f08 ("drm/amd/pm: add inst to dpm_set_powergating_by_smu")
However, this happened in parallel to the vcn 5.0.1
development so it was missed there.
Alex Deucher [Wed, 12 Feb 2025 21:31:43 +0000 (16:31 -0500)]
drm/amdgpu/umsch: fix ucode check
Return an error if the IP version doesn't match otherwise
we end up passing a NULL string to amdgpu_ucode_request.
We should never hit this in practice today since we only
enable the umsch code on the supported IP versions, but
add a check to be safe.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202502130406.iWQ0eBug-lkp@intel.com/ Fixes: 020620424b27 ("drm/amd: Use a constant format string for amdgpu_ucode_request") Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Lang Yu <Lang.Yu@amd.com>
Alex Deucher [Wed, 12 Feb 2025 21:20:15 +0000 (16:20 -0500)]
drm/amdgpu/umsch: declare umsch firmware
Needed to be properly picked up for the initrd, etc.
Fixes: 3488c79beafa ("drm/amdgpu: add initial support for UMSCH") Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lang Yu <Lang.Yu@amd.com>
Sathishkumar S [Wed, 29 Jan 2025 14:04:06 +0000 (19:34 +0530)]
drm/amdgpu: Add ring reset callback for JPEG2_0_0
Add ring reset function callback for JPEG2_0_0 to
recover from job timeouts without a full gpu reset.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sathishkumar S [Wed, 29 Jan 2025 13:48:11 +0000 (19:18 +0530)]
drm/amdgpu: Add ring reset callback for JPEG2_5_0
Add ring reset function callback for JPEG2_5_0 to
recover from job timeouts without a full gpu reset.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sathishkumar S [Tue, 28 Jan 2025 03:47:08 +0000 (09:17 +0530)]
drm/amdgpu: Per-instance init func for JPEG2_5_0
Add helper functions to handle per-instance initialization
and deinitialization in JPEG2_5_0.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sathishkumar S [Wed, 29 Jan 2025 13:41:35 +0000 (19:11 +0530)]
drm/amdgpu: Add ring reset callback for JPEG3_0_0
Add ring reset function callback for JPEG3_0_0 to
recover from job timeouts without a full gpu reset.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sathishkumar S [Wed, 29 Jan 2025 13:33:27 +0000 (19:03 +0530)]
drm/amdgpu: Add ring reset callback for JPEG4_0_0
Add ring reset function callback for JPEG4_0_0 to
recover from job timeouts without a full gpu reset.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sathishkumar S [Fri, 24 Jan 2025 14:59:08 +0000 (20:29 +0530)]
drm/amdgpu: Per-instance init func for JPEG4_0_3
Add helper functions to handle per-instance and per-core
initialization and deinitialization in JPEG4_0_3.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
current test is more intrusive for user queue test
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Suggested-by: Christian Koenig <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Candice Li [Tue, 11 Feb 2025 08:39:52 +0000 (16:39 +0800)]
drm/amdgpu: Enable ACA by default for psp v13_0_12
Enable ACA by default for psp v13_0_12.
Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 10 Feb 2025 21:16:01 +0000 (16:16 -0500)]
drm/amdgpu/mes: Add cleaner shader fence address handling in MES for GFX12
This commit introduces enhancements to the handling of the cleaner
shader fence in the AMDGPU MES driver:
- The MES (Microcode Execution Scheduler) now sends a PM4 packet to the
KIQ (Kernel Interface Queue) to request the cleaner shader, ensuring
that requests are handled in a controlled manner and avoiding the
race conditions.
- The CP (Compute Processor) firmware has been updated to use a private
bus for accessing specific registers, avoiding unnecessary operations
that could lead to issues in VF (Virtual Function) mode.
- The cleaner shader fence memory address is now set correctly in the
`mes_set_hw_res_pkt` structure, allowing for proper synchronization of
the cleaner shader execution.
Cc: Christian König <christian.koenig@amd.com> Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Suggested-by: Shaoyun Liu <shaoyun.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiaogang Chen [Wed, 12 Feb 2025 06:24:02 +0000 (00:24 -0600)]
drm/amdkfd: Fix pasid value leak
Curret kfd does not allocate pasid values, instead uses pasid value for each
vm from graphic driver. So should not prevent graphic driver from releasing
pasid values since the values are allocated by graphic driver, not kfd driver
anymore. This patch does not stop graphic driver release pasid values.
Fixes: 8544374c0f82 ("drm/amdkfd: Have kfd driver use same PASID values from graphic driver") Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shaoyun Liu [Wed, 5 Feb 2025 17:33:11 +0000 (12:33 -0500)]
drm/amd/include : Update MES v12 API for fence update
MES fence_value will be updated in fence_addr if API success,
otherwise upper 32 bit will be used to indicate error code.
In any case, MES will trigger an EOP interrupt with 0xb1 as
context id in the interrupt cookie
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Asad Kamal [Mon, 10 Feb 2025 05:38:36 +0000 (13:38 +0800)]
drm/amd/pm: Rename pmfw message SetPstatePolicy
Rename pmfw message SelectPstatePolicy to SetThrottlingPolicy as per
pmfw interface header for smu_v_13_0_6
Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu/mes: Add cleaner shader fence address handling in MES for GFX11
This commit introduces enhancements to the handling of the cleaner
shader fence in the AMDGPU MES driver:
- The MES (Microcode Execution Scheduler) now sends a PM4 packet to the
KIQ (Kernel Interface Queue) to request the cleaner shader, ensuring
that requests are handled in a controlled manner and avoiding the
race conditions.
- The CP (Compute Processor) firmware has been updated to use a private
bus for accessing specific registers, avoiding unnecessary operations
that could lead to issues in VF (Virtual Function) mode.
- The cleaner shader fence memory address is now set correctly in the
`mes_set_hw_res_pkt` structure, allowing for proper synchronization of
the cleaner shader execution.
Cc: lin cao <lin.cao@amd.com> Cc: Jingwen Chen <Jingwen.Chen2@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed by: Shaoyun.liu <Shaoyun.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ying Li [Tue, 11 Feb 2025 16:53:19 +0000 (11:53 -0500)]
drm/amd/amdgpu: add support for IP version 11.5.2
This initializes drm/amd/amdgpu version 11.5.2
Signed-off-by: YING LI <yingli12@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ying Li [Tue, 11 Feb 2025 16:51:01 +0000 (11:51 -0500)]
drm/amd/pm: add support for IP version 11.5.2
This initializes drm/amd/pm version 11.5.2
Signed-off-by: YING LI <yingli12@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Tue, 14 Jan 2025 14:53:13 +0000 (09:53 -0500)]
drm/amdgpu: Unlocked unmap only clear page table leaves
SVM migration unmap pages from GPU and then update mapping to GPU to
recover page fault. Currently unmap clears the PDE entry for range
length >= huge page and free PTB bo, update mapping to alloc new PT bo.
There is race bug that the freed entry bo maybe still on the pt_free
list, reused when updating mapping and then freed, leave invalid PDE
entry and cause GPU page fault.
By setting the update to clear only one PDE entry or clear PTB, to
avoid unmap to free PTE bo. This fixes the race bug and improve the
unmap and map to GPU performance. Update mapping to huge page will
still free the PTB bo.
With this change, the vm->pt_freed list and work is not needed. Add
WARN_ON(unlocked) in amdgpu_vm_pt_free_dfs to catch if unmap to free the
PTB.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's GPU page size not CPU page size. In most cases they
are the same, but not always. This can lead to overallocation
on systems with larger pages.
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Tue, 28 Jan 2025 20:48:26 +0000 (15:48 -0500)]
drm/amdkfd: fix missing L2 cache info in topology
In some ASICs L2 cache info may miss in kfd topology,
because the first bitmap may be empty, that means
the first cu may be inactive, so to find the first
active cu will solve the issue.
v2: Only find the first active cu in the first xcc
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA writes has to probe invalidate RW lines. Set snoop bit in mmhub for
this to happen.
v2: Missed a few mmhub_v9_4. Added now.
v3: Calculate hub offset once since it doesn't change inside the loop
Modified function names based on review comments.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Tue, 21 Jan 2025 16:02:34 +0000 (11:02 -0500)]
drm/amd/display: sspl: cleanup filter code
[Why & How]
Remove unused filters and functions
Add static to limit scope
Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Mon, 13 Jan 2025 16:57:54 +0000 (11:57 -0500)]
drm/amd/display: pass calculated dram_speed_mts to dml2
[why]
currently dml2 is using a hard coded 16 to convert memclk to dram_speed_mts.
for apu, this depends on wck_ratio.
change to pass the already calculated dram_speed_mts from fpu to dml2.
v2: use existing calculation of dram_speed_mts for now to avoid regression
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Brendan Tam [Thu, 23 Jan 2025 16:25:16 +0000 (11:25 -0500)]
drm/amd/display: add workaround flag to link to force FFE preset
[Why]
There have been instances of some monitors being unable to link train on
their reported link speed using their selected FFE preset. If a different
FFE preset is found that has a higher rate of success during link training
this workaround can be used to force its FFE preset.
[How]
A new link workaround flag is made called force_dp_ffe_preset. The flag is
checked in override_training_settings and will set lt_settings->ffe_preset
which is null if the flag is not set. The flag is then set in
override_lane_settings.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Brendan Tam <Brendan.Tam@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Tue, 28 Jan 2025 20:12:43 +0000 (15:12 -0500)]
drm/amd/display: add s1_12 filter tables
[Why & How]
Instead of converting tables from s1_10 to s1_12, add s1_12 tables instead.
Remove init calls that do the conversion. Add APIs to read s1_10 tables
Reviewed-by: Navid Assadian <navid.assadian@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ausef Yousof [Thu, 30 Jan 2025 17:30:10 +0000 (12:30 -0500)]
drm/amd/display: limit coverage of optimization skip
[why&how]
causing some regression on dgpu which still needs the
pre-emptive return, limit this to reporter asic version
it is simple to include
different dcn versions from this point forward, each dcn
resource is initialized with the flag and can be enabled
at will
Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Mon, 27 Jan 2025 23:44:56 +0000 (18:44 -0500)]
drm/amd/display: use s1_12 filter tables in SPL
[Why & How]
Instead of converting tables from s1_10 to s1_12,
added s1_12 tables instead in SPL
Remove init calls that do the conversion
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ilya Bakoulin [Tue, 28 Jan 2025 18:14:54 +0000 (13:14 -0500)]
drm/amd/display: Don't try AUX transactions on disconnected link
[Why]
Setting link DPMS off in response to HPD disconnect creates AUX
transactions on a link that is supposed to be disconnected. This can
cause issues in some cases when the sink re-asserts HPD and expects
source to re-enable the link.
[How]
Avoid AUX transactions on disconnected link.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
find_system_memory() pulls out two fields from an SMBIOS type 17
device and sets them on KFD devices. The data offsets are counted
to find interesting data.
Instead use a struct representation to access the members and pull
out the two specific fields.
Alex Deucher [Thu, 30 Jan 2025 20:12:58 +0000 (15:12 -0500)]
drm/amdkfd: add a new flag to manage where VRAM allocations go
On big and small APUs we send KFD VRAM allocations to GTT
since the carve out is either non-existent or relatively
small. However, if someone sets the carve out size to be
relatively large, we may end up using GTT rather than VRAM.
No change of logic with this patch, but it allows the
driver to determine which logic to use based on the
carve out size in the future.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Wed, 5 Feb 2025 08:36:58 +0000 (14:06 +0530)]
drm/amdgpu: Add flag to make VBIOS read optional
Certain SOCs may not need much data from VBIOS. Some data like VBIOS
version used will be missed but it doesn't affect functionality. Add a
flag to make VBIOS image optional.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Fri, 10 Jan 2025 13:19:52 +0000 (21:19 +0800)]
drm/amd/display: Add DCN36 CORE
Add DCN36 support in dc_resource.c.
Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Fri, 10 Jan 2025 13:13:40 +0000 (21:13 +0800)]
drm/amd/display: Support DCN36 DSC
Add case on clean_up_dsc_blocks() to support DCN36 as well.
Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Fri, 10 Jan 2025 13:08:20 +0000 (21:08 +0800)]
drm/amd/display: Add DCN36 DMCUB
DMCU-B (Display Micro-Controller Unit B) is a display microcontroller
used for shared display functionality with BIOS and for advanced
power saving display features.
Add case to support DCN3.6 as well.
V2: adjust copyright license text
Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Fri, 10 Jan 2025 12:41:03 +0000 (20:41 +0800)]
drm/amd/display: Add DCN36 DML2 support
Enable DML2 for DCN36.
Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Fri, 10 Jan 2025 12:37:14 +0000 (20:37 +0800)]
drm/amd/display: Add DCN36 GPIO
Add DCN36 support in GPIO.
Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Fri, 10 Jan 2025 12:32:48 +0000 (20:32 +0800)]
drm/amd/display: Add DCN36 Resource
Add resource handling for DCN36.
V2: adjust copyright license text
V3: remove unnecessary headers
Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Fri, 10 Jan 2025 12:27:27 +0000 (20:27 +0800)]
drm/amd/display: Add DCN36 IRQ
Add IRQ services for DCN36.
This allows us to create/init and manage irqs for DCN3
V2: adjust copyright license text
Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Fri, 10 Jan 2025 12:55:42 +0000 (20:55 +0800)]
drm/amd/display: Add DCN36 BIOS command table support
Add case for DCN36 in command_table_helper2.c.
Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Fri, 10 Jan 2025 12:24:08 +0000 (20:24 +0800)]
drm/amd/display: Add DCN36 version identifiers
Add DCN3.6 asic identifiers.
Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 31 Jan 2025 02:25:12 +0000 (21:25 -0500)]
drm/amdgpu/gfx9: use amdgpu_gfx_off_ctrl_immediate() for PG
Use amdgpu_gfx_off_ctrl_immediate() when powergating.
There's no need for the delay in gfx off allow. The
powergating is dynamically disabled/enabled as for
RV/PCO on compute queues and allowing gfx off again as
soon the job is submitted improves power savings.
Lijo Lazar [Tue, 4 Feb 2025 06:32:41 +0000 (12:02 +0530)]
drm/amd/pm: Remove unnecessary device state checks
For amdgpu_get_pp_force_state, amdgpu_get_pp_cur_state already takes
care of device state check. In other cases, values are returned from
driver cached variables and are not dependent on device state.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Feifei Xu <feifei.xu@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Tue, 4 Feb 2025 06:23:26 +0000 (11:53 +0530)]
drm/amd/pm: Fix get_if_active usage
If a device supports runtime pm, then pm_runtime_get_if_active returns 0
if a device is not active and 1 if already active. However, if a device
doesn't support runtime pm, the API returns -EINVAL. A device not
supporting runtime pm implies it's not affected by runtime pm and it's
active. Hence no need to get() to increment usage count. Remove < 0
return value check. Also, ignore runpm state to determine active status.
If the device is already in suspend state, disallow access.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Feifei Xu <feifei.xu@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Tue, 4 Feb 2025 05:44:21 +0000 (11:14 +0530)]
drm/amd/pm: Add APIs for device access checks
Wrap the checks before device access in helper functions and use them
for device access. The generic order of APIs now is to do input argument
validation first and check if device access is allowed.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Feifei Xu <feifei.xu@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Mon, 3 Feb 2025 18:02:03 +0000 (11:02 -0700)]
drm/amd/display: Replace pr_info in dc_validate_boot_timing()
Use DC_LOG_DEBUG instead of pr_info to match other uses in dc.c.
Fixes: 091e301c2b41 ("drm/amd/display: Add debug messages for dc_validate_boot_timing()") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
link_enc_cfg_get_link_enc_used_by_stream() is no longer used after
2021's:
commit 6366b00346c0 ("drm/amd/display: Maintain consistent mode of
operation during encoder assignment")
which introduces and uses the _current version instead.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_max_support_fbc_buffersize() is unused since 2021's
commit 94f0d0c80cf3 ("drm/amd/display/dc/dce110/dce110_compressor: Remove
unused function 'dce110_get_required_compressed_surfacesize")
removed it's only caller.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_clock_requirements_for_state() was added in 2018 by
commit 8ab2180f96f5 ("drm/amd/display: Add function to fetch clock
requirements")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / thirdparty / kernel / linux.git / log
